This patch adds a test case to test the process record for some of
aarch64 instructions.
In each function, GDB turns on process record, and single step until
program goes to the end of the function. Then, single step backward.
In each of forward single step and backward single step, the contents
of registers are saved, and test compares them. If there is any
differences, a FAIL is emitted.
The test is flexible, and we can test other instructions easily in the
future.
gdb/testsuite:
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
Yao Qi <yao.qi@linaro.org>
* gdb.reverse/aarch64.c: New.
* gdb.reverse/aarch64.exp: New.
This patch enable gdb.reverse tests for aarch64*-linux targets.
With this patch, there are 7 FAILs in gdb.reverse/ tests.
FAIL: gdb.reverse/finish-reverse-bkpt.exp: reverse-finish from void_func trips breakpoint at entry
FAIL: gdb.reverse/finish-reverse-bkpt.exp: no spurious proceed after breakpoint stop
FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: reverse-next over call trips user breakpoint at function entry
FAIL: gdb.reverse/step-precsave.exp: reverse step into fn call
FAIL: gdb.reverse/step-precsave.exp: reverse step out of called fn
FAIL: gdb.reverse/step-reverse.exp: reverse step into fn call
FAIL: gdb.reverse/step-reverse.exp: reverse step out of called fn
gdb/testsuite:
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
* lib/gdb.exp (supports_process_record): Return true for aarch64*-linux*.
(supports_reverse): Likewise.
This patch adds the support of aarch64-linux process record and reverse
debugging. The implementation is similar to ARM's counterpart.
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c: Include linux-record.h and
record-full.h.
(struct linux_record_tdep aarch64_linux_record_tdep): Declare.
(aarch64_syscall): New enum.
(aarch64_canonicalize_syscall): New function.
(aarch64_all_but_pc_registers_record): New function.
(aarch64_linux_syscall_record): New function.
(aarch64_linux_init_abi): Install AArch64 process record
handler. Update to handle syscall recording.
* aarch64-tdep.c: Include record.h and record-full.h.
(submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
(struct aarch64_mem_r): Define.
(aarch64_record_result): New enum.
(struct insn_decode_record): Define.
(insn_decode_record): New typedef.
(aarch64_record_data_proc_reg): New function.
(aarch64_record_data_proc_imm): New function.
(aarch64_record_branch_except_sys): New function.
(aarch64_record_load_store): New function.
(aarch64_record_data_proc_simd_fp): New function.
(aarch64_record_asimd_load_store): New function.
(aarch64_record_decode_insn_handler): New function.
(deallocate_reg_mem): New function.
(aarch64_process_record): New function.
* aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
New field.
(aarch64_process_record): New extern declaration.
* configure.tgt: Add linux-record.o to gdb_target_obs.
* linux-record.h (struct linux_record_tdep) <arg7>: New field.
This patch adds the NEWS entry for aarch64-linux record replay
support.
It has been reviewed and approved.
gdb:
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
* NEWS: Add a note on process record-replay support on aarch64*-linux*
targets.
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it
returns true if the given PC is one instruction after the one that
destroyed the stack (which isn't necessarily inside an epilogue),
therefore it should be renamed to stack_frame_destroyed_p.
I also took the liberty of renaming the arch-specific implementations to
*_stack_frame_destroyed_p as well for consistency.
gdb:
2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
* amd64-tdep.c: Replace in_function_epilogue_p with
stack_frame_destroyed_p throughout.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* arm-tdep.c: Ditto.
* breakpoint.c: Ditto.
* gdbarch.sh: Ditto.
* hppa-tdep.c: Ditto.
* i386-tdep.c: Ditto.
* mips-tdep.c: Ditto.
* nios2-tdep.c: Ditto.
* rs6000-tdep.c: Ditto.
* s390-linux-tdep.c: Ditto.
* score-tdep.c: Ditto.
* sh-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* tic6x-tdep.c: Ditto.
* tilegx-tdep.c: Ditto.
* xstormy16-tdep.c: Ditto.
* gdbarch.c, gdbarch.h: Re-generated.
Add new commands to specifically enable and disable tui mode. This is
in addition to the readline bindings, but might be easier for a user to
discover if they accidentally end up in tui mode.
gdb/ChangeLog:
* NEWS: Mention 'tui enable' and 'tui disable'.
* tui/tui.c (tui_enable_command): New function.
(tui_disable_command): New function.
(_initialize_tui): New function.
gdb/doc/ChangeLog:
* gdb.texinfo (TUI): Include 'tui enable' in the introduction.
(TUI Commands): Add 'tui enable' and 'tui disable' details.
Use with_test_prefix to avoid duplicating test names when calling
the procedure test_gdbinit_history_setting multiple times.
gdb/testsuite/ChangeLog:
* gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
Use with_test_prefix.
Use cleanup to avoid leaking memory if an error occurs during tui
start up.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
buf_ptr is freed.
Calling tui_enable too early in tui_layout_command can leave the tui in
an enabled state if the user has entered an invalid layout name.
Instead postpone the call to tui_enable until later in
tui_set_layout_for_display_command just before the layout is changed.
gdb/ChangeLog:
* tui/tui-layout.c (tui_layout_command): Move call to tui_enable
into ...
(tui_set_layout_for_display_command): ...here, before calling
tui_set_layout. Only set the layout if gdb has not already
entered the TUI_FAILURE state.
Add layout name completion for the layout command.
gdb/ChangeLog:
* tui/tui-layout.c (layout_completer): New function.
(_initialize_tui_layout): Set completer on layout command.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add test for completion of layout
names.
The layout command supports the layout names $FREGS, $GREGS, $SREGS,
and $REGS. The intention of these layout names was to display the tui
register window with a specific set of registers.
First, these layout names no longer work, and haven't for a while, using
any of them will just result in switching to the general register view.
Second there is already the command 'tui reg GROUP' command to set the
displayed register set to GROUP, so making the layout command also
control the register set feels like unnecessary overloading of the
layout command.
This commit removes all code relating to supporting the register set
specific names from the layout command. Afterwards the user can select
an available layout using the layout command, and control the choice of
register set using the 'tui reg GROUP' command.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout): Remove
tui_register_display_type parameter. Remove all checking of this
parameter, and reindent function. Update header comment.
(tui_set_layout_for_display_command): Rename to...
(tui_set_layout_by_name): ...this, and don't check for different
register class types, don't pass a tui_register_display_type to
tui_set_layout. Update header comment.
(layout_names): Remove register set specific names.
* tui/tui-layout.h (tui_set_layout): Remove
tui_register_display_type parameter.
* tui/tui.c (tui_rl_change_windows): Don't pass a
tui_register_display_type to tui_set_layout.
(tui_rl_delete_other_windows): Likewise.
(tui_enable): Likewise.
* tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
(TUI_FLOAT_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_REGS_NAME): Remove.
(TUI_GENERAL_REGS_NAME_LOWER): Remove.
(TUI_SPECIAL_REGS_NAME): Remove.
(TUI_SPECIAL_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
(enum tui_register_display_type): Remove.
(struct tui_layout_def): Remove regs_display_type and
float_regs_display_type fields.
(struct tui_data_info): Remove regs_display_type field.
(tui_layout_command): Use new name for
tui_set_layout_for_display_command.
* tui/tui-data.c (layout_def): Don't initialise removed fields.
(tui_clear_win_detail): Don't initialise removed fields of
win_info.
* tui/tui-regs.c (tui_show_registers): Use new name for
tui_set_layout_for_display_command.
* tui/tui.h (tui_set_layout_for_display_command): Rename
declaration to...
(tui_set_layout_by_name): ...this.
* printcmd.c (display_command): Remove tui related layout call,
and reindent.
Add a new predicate procedure to the gdb.exp library 'skip_tui_tests',
which returns true if the tui is not compiled into gdb.
Make use of this predicate in the gdb.base/tui-layout.exp test as an
example.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (skip_tui_tests): New proc.
* gdb.base/tui-layout.exp: Check skip_tui_tests.
When using a conditional breakpoint where the condition evaluated
to false a large number of times before the program stopped,
a user reported that GDB's memory consumption was growing very
quickly until it ran out of memory.
The problem was tracked down to temporary struct values being created
each time the program stops and handles an inferior event. Because
the breakpoint condition usually evaluates to false, there can be
a fairly large number of such events to be handled before we eventually
return the prompt to the user (which is when we would normally purge
such values).
This patch fixes the issue by making sure that handle_inferior_event
releases all new values created during its execution.
gdb/ChangeLog:
* infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
(handle_inferior_event): New function.
... to avoid a build failure when building with C++ compiler
(when configured with --enable-build-with-cxx). We cannot use
"typename" as it is a C++ reserved keyword.
gdb/ChangeLog:
* ada-lang.c (to_fixed_array_type): Rename local variable
typename into type_name.
(gdb) PASS: gdb.compile/compile.exp: set unwindonsignal on
compile code *(volatile int *) 0 = 0;
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff7fba426 in _gdb_expr (__regs=0x7ffff7fb8000) at gdb command line:1
1 gdb command line: No such file or directory.
=================================================================
==10462==ERROR: AddressSanitizer: heap-use-after-free on address 0x621000cf7a3d at pc 0x0000004e46b9 bp 0x7ffdeb0f7a40 sp 0x7ffdeb0f71b8
READ of size 10 at 0x621000cf7a3d thread T0
#0 0x4e46b8 in printf_common(void*, char const*, __va_list_tag*) [clone .isra.6] (/home/jkratoch/redhat/gdb-clean-asan/gdb/gdb+0x4e46
b8)
#1 0x4f645e in vasprintf (/home/jkratoch/redhat/gdb-clean-asan/gdb/gdb+0x4f645e)
#2 0xe5cf00 in xstrvprintf common/common-utils.c:120
#3 0xe74192 in throw_it common/common-exceptions.c:332
#4 0xe742f6 in throw_verror common/common-exceptions.c:361
#5 0xddc89e in verror /home/jkratoch/redhat/gdb-clean-asan/gdb/utils.c:541
#6 0xe734bd in error common/errors.c:43
#7 0xafa1d6 in call_function_by_hand_dummy /home/jkratoch/redhat/gdb-clean-asan/gdb/infcall.c:1031
#8 0xe81858 in compile_object_run compile/compile-object-run.c:119
#9 0xe7733c in eval_compile_command compile/compile.c:577
#10 0xe7541e in compile_code_command compile/compile.c:153
It is obvious why that happens, dummy_frame_pop() will call compile objfile
cleanup which will free that objfile and NAME then becomes a stale pointer.
> Is there any reason we release OBJFILE in the dummy frame dtor? Why
> don't we register a cleanup to release in OBJFILE in compile_object_run?
> together with releasing compile_module? 'struct compile_module' has a
> field objfile, which should be released together with
> 'struct compile_module' instead of dummy_frame.
(gdb) break puts
Breakpoint 2 at 0x3830c6fd30: file ioputs.c, line 34.
(gdb) compile code puts("hello")
Breakpoint 2, _IO_puts (str=0x7ffff7ff8000 "hello") at ioputs.c:34
34 {
The program being debugged stopped while in a function called from GDB.
Evaluation of the expression containing the function
(_gdb_expr) will be abandoned.
When the function is done executing, GDB will silently stop.
(gdb) bt
(gdb) _
Now compile_object_run() called from line
(gdb) compile code puts("hello")
has finished for a long time. But we still need to have that injected code
OBJFILE valid when GDB is executing it. Therefore OBJFILE is freed only from
destructor of the frame #1.
At the patched line of call_function_by_hand_dummy() the dummy frame
destructor has not yet been run but it will be run before the fetched NAME
will get used.
gdb/ChangeLog
2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix ASAN crash for gdb.compile/compile.exp.
* infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
Please send debug output to gdb_stdlog.
OK but gdb/compile/ is using now only gdb_stdout; the error above is due to
a copy-paste. So I will send a follow-up patch to change all the other
gdb/compile/ gdb_stdout strings to gdb_stdlog.
gdb/ChangeLog
2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
(gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
* compile/compile-object-load.c (setup_sections, compile_object_load):
Likewise.
* compile/compile.c (compile_to_object): Likewise.
Some buildslaves are showing that this test is failing. E.g.,:
https://sourceware.org/ml/gdb-testers/2015-q2/msg04164.html
The issue is that HISTSIZE is set to 1000 in the environment that runs
the tests (that's the default in Fedora, set in /etc/profile).
We can trivially reproduce it with:
$ HISTSIZE=1000 make check RUNTESTFLAGS="gdbinit-history.exp"
(...)
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/gdbinit-history.exp ...
FAIL: gdb.base/gdbinit-history.exp: show history size
FAIL: gdb.base/gdbinit-history.exp: show history size
FAIL: gdb.base/gdbinit-history.exp: show commands
gdb.log shows:
...
(gdb) set height 0
(gdb) set width 0
(gdb) show history size
The size of the command history is 1000.
(gdb) FAIL: gdb.base/gdbinit-history.exp: show history size
gdb/testsuite/ChangeLog:
2015-05-19 Pedro Alves <palves@redhat.com>
* gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
Save the whole env array instead of just HOME. Unset HISTSIZE in
the environment while testing. Restore whole environment
afterwards.
It is planned the existing GDB command 'print' will be able to evaluate its
expressions using the compiler. There will be some option to choose between
the existing GDB evaluation and the compiler evaluation. But as an
intermediate step this patch provides the expression printing feature as a new
command.
I can imagine it could be also called 'maintenance compile print' as in the
future one should be able to use its functionality by the normal 'print'
command.
There was a discussion with Eli about the command name:
https://sourceware.org/ml/gdb-patches/2015-03/msg00880.html
As there were no other comments yet I haven't renamed it yet, before there is
some confirmation about settlement on the final name.
Support for the GDB '@' operator to create arrays has been submitted for GCC:
[gcc patch] libcc1: '@' GDB array operator
https://gcc.gnu.org/ml/gcc-patches/2015-03/msg01451.html
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Phil Muldoon <pmuldoon@redhat.com>
* NEWS (Changes since GDB 7.9): Add compile print.
* compile/compile-c-support.c (add_code_header, add_code_footer)
(c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
COMPILE_I_PRINT_VALUE_SCOPE.
* compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
(COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
New.
* compile/compile-object-load.c: Include block.h.
(get_out_value_type): New function.
(compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
OUT_VALUE_TYPE.
* compile/compile-object-load.h (struct compile_module): Add fields
out_value_addr and out_value_type.
* compile/compile-object-run.c: Include valprint.h and compile.h.
(struct do_module_cleanup): Add fields out_value_addr and
out_value_type.
(do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
COMPILE_I_PRINT_VALUE_SCOPE.
(compile_object_run): Propagate out_value_addr and out_value_type.
Pass OUT_VALUE_ADDR.
* compile/compile.c: Include valprint.h.
(compile_print_value, compile_print_command): New functions.
(eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
(_initialize_compile): Update compile code help text. Install
compile_print_command.
* compile/compile.h (compile_print_value): New prototype.
* defs.h (enum compile_i_scope_types): Add
COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
gdb/doc/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Compiling and Injecting Code): Add compile print.
gdb/testsuite/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-print.c: New file.
* gdb.compile/compile-print.exp: New file.
Currently the code fetches _gdb_expr address/types at multiple places, guessing
its parameters at multiple places etc.
Fetch it once, verify it has expected type and then rely on it.
While the patch tries to clean up the code it is still horrible due to the
missing C++ sub-classing.
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
Rely on its parameter count.
(compile_object_load): Replace lookup_minimal_symbol_text by
lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
return value.
* compile/compile-object-load.h (struct compile_module): Replace
func_addr by func_sym.
* compile/compile-object-run.c: Include block.h.
(compile_object_run): Reset module variable after it is freed. Use
FUNC_SYM instead of FUNC_ADDR. Rely on it.
For a reason unknown to me GDB was using -w instead of -Wall for 'compile code'.
The problem is later patch for 'compile printf' really needs some warnings to
be able to catch for example missing format string parameters:
(gdb) compile printf "%d\n"
GCC does not seem to be able to cancel -w (there is nothing like -no-w).
Besides that I think even 'compile code' can benefit from -Wall.
That #ifndef change in print_one_macro() is needed otherwise we get
macro-redefinition warnings for the GCC built-in macros (as -w is no
longer in effect). For example, without the #ifndef/#endif one gets:
compile -r -- void _gdb_expr(){int i = 5;}^M
/tmp/gdbobj-xpU1yB/out4.c:4:0: warning: "__FILE__" redefined [-Wbuiltin-macro-redefined]^M
/tmp/gdbobj-xpU1yB/out4.c:5:0: warning: "__LINE__" redefined^M
...
It makes more sense to pick the inferior's version of the macros, hence
#ifndef instead of #undef.
That new testsuite XFAIL is there as if one changes the struct definition to be
compliant with cv-qualifiers (to prevent the warnings):
struct struct_type {
- struct struct_type *selffield;
+ volatile struct struct_type *selffield;
only then GCC/GDB will hit the crash, described in that GDB PR 18202.
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-c-support.c (print_one_macro): Use #ifndef.
(generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
(c_compute_program): Call generate_register_struct after typedefs.
* compile/compile-loc2c.c (push, pushf_register_address)
(pushf_register): Cast to GCC_UINTPTR.
(do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
(compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
* compile/compile.c (_initialize_compile): Enable warnings for
COMPILE_ARGS.
gdb/testsuite/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-ops.exp: Cast param to void.
* gdb.compile/compile.exp: Complete type for _gdb_expr.
(compile code struct_object.selffield = &struct_object): Add xfail.
Provide a way to access current 'scope' during the do_module_cleanup stage and
associate more data with it.
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* cli/cli-script.c (execute_control_command): Update
eval_compile_command caller.
* compile/compile-object-load.c (compile_object_load): Add parameters
scope and scope_data. Set them.
* compile/compile-object-load.h (struct compile_module): Add fields
scope and scope_data.
(compile_object_load): Add parameters scope and scope_data.
* compile/compile-object-run.c (struct do_module_cleanup): Add fields
scope and scope_data.
(compile_object_run): Propagate the fields scope and scope_data.
* compile/compile.c (compile_file_command, compile_code_command):
Update eval_compile_command callers.
(eval_compile_command): Add parameter scope_data. Pass it plus scope.
* compile/compile.h (eval_compile_command): Add parameter scope_data.
* defs.h (struct command_line): Add field scope_data.
The later 'compile print' command should share its behavior with the existing
'print' command. Make the needed existing parts of print_command_1 public.
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* printcmd.c (struct format_data): Move it to valprint.h.
(print_command_parse_format, print_value): New functions from ...
(print_command_1): ... here. Call them.
* valprint.h (struct format_data): Move it here from printcmd.c.
(print_command_parse_format, print_value): New declarations.
In Ada, index types of arrays can be enumeration types, and enumeration
types can be non-contiguous. In which case the address of elements is
not given by the value of the index, but by its position in the enumeration
type.
In other words, in this example:
type Color is (Blue, Red);
for Color use (Blue => 8, Red => 12, Green => 16);
type A is array (Color) of Integer;
type B is array (1 .. 3) of Integer;
Arrays of type A and B will have the same layout in memory, even if
the enumeration Color has a hole in its set of integer value.
Since recently support for such a feature was in ada-lang.c, where the
array was casted to a regular continuous index range. We were losing
the information of index type. And this was not quite working for
subranges in variable-length fields; their bounds are expressed using
the integer value of the bounds, not its position in the enumeration,
and there was some confusion all over ada-lang.c as to whether we had
the position or the integer value was used for indexes.
The idea behind this patch is to clean this up by keeping the real
representation of these array index types and bounds when representing
the value, and only use the position when accessing the elements or
computing the length. This first patch fixes the printing of such
an array.
To the best of my knowledge, this feature only exists in Ada so it
should only affect this language.
gdb/ChangeLog:
Jerome Guitton <guitton@adacore.com>:
* ada-lang.c (ada_value_ptr_subscript): Use enum position of
index to get element instead of enum value.
(ada_value_slice_from_ptr, ada_value_slice): Use enum position
of index to compute length, but enum values to compute bounds.
(ada_array_length): Use enum position of index instead of enum value.
(pos_atr): Move position computation to...
(ada_evaluate_subexp): Use enum values to compute bounds.
* gdbtypes.c (discrete_position): ...this new function.
* gdbtypes.h (discrete_position): New function declaration.
* valprint.c (val_print_array_elements): Call discrete_position
to handle array indexed by non-contiguous enumeration types.
gdb/testsuite/ChangeLog:
* gdb.ada/arr_enum_with_gap: New testcase.
In the case of non bit-packed arrays, GNAT does not generate its
traditional XP encoding; it is not needed. However, it still generates
the so-called "implementation type" with a P suffix. This
implementation type shall be skipped when looking for other
descriptive types such as XA encodings for variable-length
fields.
Note also that there may be an intermediate typedef between the
implementation type and its XA description. It shall be skipped
as well.
gdb/ChangeLog:
Jerome Guitton <guitton@adacore.com>
* ada-lang.c (find_parallel_type_by_descriptive_type):
Go through typedefs during lookup.
(to_fixed_array_type): Add support for non-bit packed arrays
as variable-length fields.
gdb/testsuite/ChangeLog:
* gdb.ada/byte_packed_arr: New testcase.
The PPC64 buildbot has been showing timeouts in mi-nsmoribund.exp,
like this:
(...)
-thread-info
FAIL: gdb.mi/mi-nsmoribund.exp: thread state: all running except the breakpoint thread (timeout)
... and I can reproduce this on gcc110 (PPC64) on the gcc compile
farm.
That is, the test sends "-thread-info" to GDB, but GDB never replies
back.
The problem is that these machines are too fast for gdb. :-)
That test has a few threads running the same tight loop, and
constantly hitting a thread-specific breakpoint that needs to be
stepped over. If threads trip on breakpoints fast enough that
linux-nat.c's event pipe associated with SIGCHLD is constantly being
written to, even if the stdin file descriptor also has an event to
handle, gdb never gets to it. because linux-nat.c's pipe comes first
in the set of descriptors served by the poll/select code in the event
loop.
Fix this by having the event loop serve file event sources in
round-robin-like fashion, similarly to how its done in
gdb_do_one_event.
Unfortunately, the poll and the select variants each need their own
fixing.
Tested on x86_64 Fedora 20 (poll and select variants), and PPC64
Fedora 18. Fixes the timeout in the PPC64 machine in the compile farm
that times out without this, and I won't be surprised if it fixes
other random timeouts in other tests.
(gdbserver's copy of the event-loop doesn't need this (yet), as it
still pushes all ready events to an event queue. That is, it hasn't
had 70b66289 merged yet. We should really merge both event-loop.c
copies into a single shared file, but that's for another day.)
gdb/ChangeLog:
2015-05-15 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
* event-loop.c (gdb_notifier) <next_file_handler,
next_poll_fds_index>: New fields.
(get_next_file_handler_to_handle_and_advance): New function.
(delete_file_handler): If deleting the next file handler to
handle, advance to the next file handler.
(gdb_wait_for_event): Bail early if no event fired. Poll file
handlers in round-robin fashion.
Fixes:
In file included from ../../../binutils-gdb/gdb/gdbserver/server.h:61:0,
from ../../../binutils-gdb/gdb/gdbserver/server.c:19:
../../../binutils-gdb/gdb/gdbserver/target.h:442:50: error: second operand to the conditional operator is of type 'void', but the third operand is neither a throw-expression nor of type 'void'
(*the_target->handle_new_gdb_connection) () : 0)
^
Reported by Yuanhui Zhang.
gdb/gdbserver/ChangeLog:
2015-05-15 Pedro Alves <palves@redhat.com>
* target.h (target_handle_new_gdb_connection): Rewrite using if
wrapped in do/while.
Building in C++ mode errors with:
~~~
g++ -fpermissive (...) /home/pedro/gdb/mygit/src/gdb/gdbserver/../nat/x86-linux.c
In file included from /home/pedro/gdb/mygit/src/gdb/gdbserver/../nat/x86-linux.h:23:0,
from /home/pedro/gdb/mygit/src/gdb/gdbserver/../nat/x86-linux.c:21:
/home/pedro/gdb/mygit/src/gdb/gdbserver/../nat/linux-nat.h:74:13: error: use of enum ‘target_stop_reason’ without previous declaration
extern enum target_stop_reason lwp_stop_reason (struct lwp_info *lwp);
^
/home/pedro/gdb/mygit/src/gdb/gdbserver/../nat/linux-nat.h:74:70: error: invalid type in declaration before ‘;’ token
extern enum target_stop_reason lwp_stop_reason (struct lwp_info *lwp);
^
~~~
gdb/ChangeLog:
2015-05-15 Pedro Alves <palves@redhat.com>
* nat/linux-nat.h: Include "target/waitstatus.h".
Building mingw GDB with --enable-build-with-cxx shows:
../../binutils-gdb/gdb/python/py-unwind.c:500:45: error: cannot convert 'cached_frame_info::reg_info*' to 'pyuw_prev_register(frame_info*, void**, int)::reg_info*' in initialization
struct reg_info *reg_info = cached_frame->reg;
^
../../binutils-gdb/gdb/python/py-unwind.c:501:60: error: invalid use of incomplete type 'struct pyuw_prev_register(frame_info*, void**, int)::reg_info'
struct reg_info *reg_info_end = reg_info + cached_frame->reg_count;
^
../../binutils-gdb/gdb/python/py-unwind.c:500:10: error: forward declaration of 'struct pyuw_prev_register(frame_info*, void**, int)::reg_info'
struct reg_info *reg_info = cached_frame->reg;
^
../../binutils-gdb/gdb/python/py-unwind.c:505:37: error: cannot increment a pointer to incomplete type 'pyuw_prev_register(frame_info*, void**, int)::reg_info'
for (; reg_info < reg_info_end; ++reg_info)
^
../../binutils-gdb/gdb/python/py-unwind.c:507:29: error: invalid use of incomplete type 'struct pyuw_prev_register(frame_info*, void**, int)::reg_info'
if (regnum == reg_info->number)
^
../../binutils-gdb/gdb/python/py-unwind.c:500:10: error: forward declaration of 'struct pyuw_prev_register(frame_info*, void**, int)::reg_info'
struct reg_info *reg_info = cached_frame->reg;
^
../../binutils-gdb/gdb/python/py-unwind.c:508:68: error: invalid use of incomplete type 'struct pyuw_prev_register(frame_info*, void**, int)::reg_info'
return frame_unwind_got_bytes (this_frame, regnum, reg_info->data);
^
../../binutils-gdb/gdb/python/py-unwind.c:500:10: error: forward declaration of 'struct pyuw_prev_register(frame_info*, void**, int)::reg_info'
struct reg_info *reg_info = cached_frame->reg;
^
../../binutils-gdb/gdb/python/py-unwind.c: In function 'int pyuw_sniffer(const frame_unwind*, frame_info*, void**)':
../../binutils-gdb/gdb/python/py-unwind.c:574:70: warning: invalid conversion from 'void*' to 'cached_frame_info*' [-fpermissive]
reg_count * sizeof (cached_frame->reg[0]));
^
../../binutils-gdb/gdb/python/py-unwind.c: In function 'void pyuw_on_new_gdbarch(gdbarch*)':
../../binutils-gdb/gdb/python/py-unwind.c:636:47: warning: invalid conversion from 'void*' to 'pyuw_gdbarch_data_type*' [-fpermissive]
gdbarch_data (newarch, pyuw_gdbarch_data);
^
../../binutils-gdb/gdb/python/py-unwind.c:647:29: warning: invalid conversion from 'void*' to 'const frame_data*' [-fpermissive]
unwinder->unwind_data = (void *) newarch;
^
../../binutils-gdb/gdb/python/py-unwind.c: At global scope:
../../binutils-gdb/gdb/python/py-unwind.c:699:21: error: redefinition of 'PyTypeObject pending_frame_object_type'
static PyTypeObject pending_frame_object_type =
^
../../binutils-gdb/gdb/python/py-unwind.c:96:21: error: 'PyTypeObject pending_frame_object_type' previously declared here
static PyTypeObject pending_frame_object_type
^
../../binutils-gdb/gdb/python/py-unwind.c:749:21: error: redefinition of 'PyTypeObject unwind_info_object_type'
static PyTypeObject unwind_info_object_type =
^
../../binutils-gdb/gdb/python/py-unwind.c:99:21: error: 'PyTypeObject unwind_info_object_type' previously declared here
static PyTypeObject unwind_info_object_type
^
The first kind of error is caused by the embedded struct definition,
so move it out of the parent struct.
The second kind of error is caused by forward declaring a static
global variable, which works in C, but not in C++ (or C with
-fno-common). Make it using extern instead, like done in other
similar cases.
gdb/ChangeLog:
2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
* python/py-unwind.c (struct reg_info): Move out of ...
(struct cached_frame_info): ... this scope.
(pending_frame_object_type, unwind_info_object_type): Make extern.
Consider the following declarations:
type Signed_Small is new Integer range - (2 ** 5) .. (2 ** 5 - 1);
type Signed_Simple_Array is array (1 .. 4) of Signed_Small;
pragma Pack (Signed_Simple_Array);
SSA : Signed_Simple_Array := (-1, 2, -3, 4);
GDB currently print its value incorrectly for the elements that
are negative:
(gdb) print ssa
$1 = (65535, 2, 1048573, 4)
(gdb) print ssa(1)
$2 = 65535
(gdb) print ssa(2)
$3 = 2
(gdb) print ssa(3)
$4 = 1048573
(gdb) print ssa(4)
$5 = 4
What happens is that the sign-extension is not working because
we're trying to do left shift with a negative count. In
ada_value_primitive_packed_val, we have a loop which populates
the extra bits of the target (unpacked) value, after extraction
of the data from the original (packed) value:
while (ntarg > 0)
{
accum |= sign << accumSize;
unpacked[targ] = accum & ~(~0L << HOST_CHAR_BIT);
!!! -> accumSize -= HOST_CHAR_BIT;
accum >>= HOST_CHAR_BIT;
ntarg -= 1;
targ += delta;
}
At each iteration, accumSize gets decremented by HOST_CHAR_BIT,
which can easily cause it to become negative, particularly on
little endian targets, where accumSize is at most HOST_CHAR_BIT - 1.
This causes us to perform a left-shift operation with a negative
accumSize at the next loop iteration, which is undefined, and
acutally does not produce the effect we wanted (value left untouched)
when the code is compiled with GCC.
This patch fixes the issue by simply setting accumSize to zero
if negative.
gdb/ChangeLog:
* ada-lang.c (ada_value_primitive_packed_val): Make sure
accumSize is never negative.
gdb/testsuite/ChangeLog:
* gdb.ada/pckd_neg: New testcase.
Fix build errors introduced by
https://sourceware.org/ml/gdb-patches/2015-05/msg00281.html, which
didn't account for the change of the name of the struct process_info
field 'private' to 'priv' made in
https://sourceware.org/ml/gdb-patches/2015-02/msg00829.html.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_new_fork): Change reference
to process_info.private to process_info.priv.
* linux-arm-low.c (arm_new_fork): Likewise.
* linux-mips-low.c (mips_linux_new_fork): Likewise.
The following patch...
| proc-service, extern "C"
|
| libthread_db.so calls symbols in the client (GDB), through the
| proc-service interface. These routines must have extern "C" linkage
| so their symbol names are not mangled when GDB is built as a C++
| program. On the GDBserver side, we were missing fallback declarations for
| all these symbols.
|
| gdb/ChangeLog:
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
|
| gdb/gdbserver/ChangeLog:
| 2015-02-27 Pedro Alves <palves@redhat.com>
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
| [!HAVE_PROC_SERVICE_H] (struct ps_prochandle): Forward declare.
| [!HAVE_PROC_SERVICE_H] (ps_pdread, ps_pdwrite, ps_ptread)
| ps_ptwrite, ps_lgetregs, ps_lsetregs, ps_lgetfpregs)
| (ps_lsetfpregs, ps_getpid)
| (ps_get_thread_area, ps_pglobal_lookup, ps_pstop, ps_pcontinue)
| (ps_lstop, ps_lcontinue, ps_lgetxregsize, ps_lgetxregs)
| (ps_lsetxregs, ps_plog): Declare.
... added a number of declarations which do not compile when cross-
compiling GDBserver on arm-android. The problem comes from type
prfpregset_t not being declared:
/[...]/gdbserver/gdb_proc_service.h:98:47:
error: unknown type name 'prfpregset_t'
After searching through the includes of the install we have,
I could not find that type being declared anywhere. So I did
the same as for prgregset_t, and created the typedef if the
type isn't declared.
gdb/gdbserver/ChangeLog:
* configure.ac: Add prfpregset_t BFD_HAVE_SYS_PROCFS_TYPE check.
* configure, config.in: Regenerate.
* gdb_proc_service.h [HAVE_PRFPREGSET_T] (prfpregset_t):
Declare typedef.
The function tui_dispatch_ctrl_char() has an old workaround (from 1999)
for buggy terminals and/or ncurses library that don't return page
up/down keys as single characters. Because the workaround is so old, I
think the bug it is targetting is no longer relevant anymore.
But more importantly, the workaround is itself buggy: it 1) performs a
blocking call to wgetch() and 2) if the key returned by wgetch() does
not make up a relevant key sequence it throws away the input instead of
pushing it back via ungetch(). And indeed the workaround breaks Alt-key
sequences under TERM=xterm because of bug #2.
So this patch removes the buggy workaround and tidies up the function
accordingly.
I personally tested this change on a recent xterm (with TERM=xterm) in
Fedora 20 and had no problems with having ncurses properly interpret
page up/down keys. And Alt-key sequences now work when TERM=xterm too.
gdb/ChangeLog:
* tui/tui-command.c: Remove include of <ctype.h>.
(tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
regcache_cpy_no_passthrough is no longer used for a standalone call.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* regcache.c (regcache_cpy_no_passthrough): New declaration.
(regcache_cpy_no_passthrough): Make it static, add function comment.
* regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
(regcache_cpy_no_passthrough): Remove declaration.
Now stop_registers are no longer used and it can be removed.
I am not much sure what 'proceed_to_finish' really means now so I make a wild
guess while updating comments about it.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdbthread.h (struct thread_control_state): Update comment for
proceed_to_finish.
* infcall.c (run_inferior_call): Update comment about
proceed_to_finish.
* infcmd.c (get_return_value): Update comment about stop_registers.
(finish_forward): Update comment about proceed_to_finish.
* infrun.c (stop_registers): Remove.
(clear_proceed_status, normal_stop): Remove stop_registers handling.
* infrun.h (stop_registers): Remove.
With dummy_frame destructors GDB no longer has to use global stop_registers.
dummy_frame's registers can be now stored associated with their specific
dummy_frame.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* infcall.c (struct dummy_frame_context_saver)
(dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
(dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
(dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
New.
(call_function_by_hand_dummy): Move discard_cleanups of
inf_status_cleanup before dummy_frame_push. Call
dummy_frame_context_saver_setup and prepare context_saver_cleanup.
Use dummy_frame_context_saver_get_regs instead of stop_registers.
* infcall.h (struct dummy_frame_context_saver)
(dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
(dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
New declarations.
* infcmd.c: Include infcall.h.
(get_return_value): Add parameter ctx_saver, use it instead of
stop_registers.
(print_return_value): Add parameter ctx_saver, pass it.
(struct finish_command_continuation_args): Add field ctx_saver.
(finish_command_continuation): Update print_return_value caller.
(finish_command_continuation_free_arg): Free also ctx_saver.
(finish_forward): Call dummy_frame_context_saver_setup.
* inferior.h (struct dummy_frame_context_saver): New declaration.
(get_return_value): Add parameter ctx_saver.
* python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
get_return_value caller.
Later patch needs two independent destructors for the same dummy_frame.
Therefore the registrar has been extended to an arbitrary number of
destructors.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* dummy-frame.c (struct dummy_frame_dtor_list): New.
(struct dummy_frame): Replace dtor and dtor_data by dtor_list.
(remove_dummy_frame): Process dtor_list.
(pop_dummy_frame): Process dtor_list.
(register_dummy_frame_dtor): Maintain dtor_list.
(find_dummy_frame_dtor): Handle dtor_list.
* dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
Update comments.