7175 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Maciej W. Rozycki
|
d8dab6c3bb |
MIPS/Linux: Correct o32 core file FGR interpretation
Our interpretation of the layout of floating-point general registers
(FGRs) in o32 MIPS/Linux core files is different from how the kernel
makes them, affecting the CP0 Status.FR=0 aka FP32 mode (we don't
currently support the CP0 Status.FR=1 aka FP64 mode with the o32 ABI).
In the FP32 mode pairs of consecutive even/odd-numbered 32-bit registers
are placed together as 64-bit values in even-indexed 64-bit slots
corresponding to the even index, leaving the odd-indexed 64-bit slots
unused. These 64-bit values are stored according to the endianness in
effect, which is how the MIPS II SDC1 instruction would store them.
It has always been like that with the Linux kernel for MIPS II and
higher ISA processors, which are the vast majority ever supported, as it
is indeed SDC1 that the kernel uses to store FGRs in a floating-point
context.
With MIPS I processors, which lack the SDC1 instruction, a layout that
we expect used to be used long ago, but it was corrected for consistency
with newer processors back in 2002, with `linux-mips.org' (LMO) commit
42533948caac ("Major pile of FP emulator changes."), the fix corrected
with LMO commit 849fa7a50dff ("R3k FPU ptrace() handling fixes."), and
then broken and fixed over and over again, until last time fixed with
commit 80cbfad79096 ("MIPS: Correct MIPS I FP context layout").
Consequently the values we see in FP32 core files or produce with the
`gcore' command are different from those obtained from the same FP
context of a live process, e.g. with a big-endian configuration these
live values:
(gdb) info registers float
f0: 0x4b5c6d7e flt: 14445950 dbl: 1.7446153562345001e-274
f1: 0x0718293a flt: 1.14473244e-34
f2: 0xc3d4e5f6 flt: -425.79657 dbl: -1.046160437414959e-233
f3: 0x8f90a1b2 flt: -1.42617791e-29
f4: 0x4c5d6e7f flt: 58046972 dbl: 1.1908587841220294e-269
f5: 0x08192a3b flt: 4.60914044e-34
f6: 0xc4d5e6f7 flt: -1711.21765 dbl: -6.2784661835068965e-306
f7: 0x8091a2b3 flt: -1.33745124e-38
f8: 0x45566778 flt: 3430.4668 dbl: 1.6530355595710607e-303
f9: 0x01122334 flt: 2.68412219e-38
f10: 0xcddeeff0 flt: -467533312 dbl: -2.1174864564135575e-262
f11: 0x899aabbc flt: -3.72356497e-33
f12: 0x46576879 flt: 13786.1182 dbl: 1.143296486773654e-298
f13: 0x02132435 flt: 1.08102453e-37
f14: 0xcedfe0f1 flt: -1.87803046e+09 dbl: -1.4399511533369862e-257
f15: 0x8a9bacbd flt: -1.4990934e-32
f16: 0x4758697a flt: 55401.4766 dbl: 7.8856820439568725e-294
f17: 0x03142536 flt: 4.3536007e-37
f18: 0xcfd0e1f2 flt: -7.00893696e+09 dbl: -9.7791926757340559e-253
f19: 0x8b9cadbe flt: -6.03504325e-32
f20: 0x48596a7b flt: 222633.922 dbl: 5.4255001483306113e-289
f21: 0x04152637 flt: 1.75324132e-36
f22: 0xc0d1e2f3 flt: -6.55895376 dbl: -6.6332401002310683e-248
f23: 0x8c9daebf flt: -2.42948516e-31
f24: 0x495a6b7c flt: 894647.75 dbl: 3.7244369058749787e-284
f25: 0x05162738 flt: 7.06016945e-36
f26: 0xc1d2e3f4 flt: -26.3613052 dbl: -4.4941535759306202e-243
f27: 0x8d9eafb0 flt: -9.77979703e-31
f28: 0x4a5b6c7d flt: 3595039.25 dbl: 2.5514593711161396e-279
f29: 0x06172839 flt: 2.84294945e-35
f30: 0xc2d3e4f5 flt: -105.947182 dbl: -3.035646690850097e-238
f31: 0x8e9fa0b1 flt: -3.93512664e-30
fcsr: 0x0
fir: 0xf30000
(gdb)
show up in a core file as these:
(gdb) info registers float
f0: 0x0718293a flt: 1.14473244e-34 dbl: nan
f1: 0x7ff80000 flt: nan
f2: 0x8f90a1b2 flt: -1.42617791e-29 dbl: nan
f3: 0x7ff80000 flt: nan
f4: 0x08192a3b flt: 4.60914044e-34 dbl: nan
f5: 0x7ff80000 flt: nan
f6: 0x8091a2b3 flt: -1.33745124e-38 dbl: nan
f7: 0x7ff80000 flt: nan
f8: 0x01122334 flt: 2.68412219e-38 dbl: nan
f9: 0x7ff80000 flt: nan
f10: 0x899aabbc flt: -3.72356497e-33 dbl: nan
f11: 0x7ff80000 flt: nan
f12: 0x02132435 flt: 1.08102453e-37 dbl: nan
f13: 0x7ff80000 flt: nan
f14: 0x8a9bacbd flt: -1.4990934e-32 dbl: nan
f15: 0x7ff80000 flt: nan
f16: 0x03142536 flt: 4.3536007e-37 dbl: nan
f17: 0x7ff80000 flt: nan
f18: 0x8b9cadbe flt: -6.03504325e-32 dbl: nan
f19: 0x7ff80000 flt: nan
f20: 0x04152637 flt: 1.75324132e-36 dbl: nan
f21: 0x7ff80000 flt: nan
f22: 0x8c9daebf flt: -2.42948516e-31 dbl: nan
f23: 0x7ff80000 flt: nan
f24: 0x05162738 flt: 7.06016945e-36 dbl: nan
f25: 0x7ff80000 flt: nan
f26: 0x8d9eafb0 flt: -9.77979703e-31 dbl: nan
f27: 0x7ff80000 flt: nan
f28: 0x06172839 flt: 2.84294945e-35 dbl: nan
f29: 0x7ff80000 flt: nan
f30: 0x8e9fa0b1 flt: -3.93512664e-30 dbl: nan
f31: 0x7ff80000 flt: nan
(gdb)
Notice how values from odd-numbered registers are shown in corresponding
even-numbered registers and how dummy 0x7ff80000 NaN values, which the
kernel places in unused slots, are reported in odd-numbered registers.
Correct our intepretation then, to match the kernel's. As it happens
the o32 FGR core file representation matches that used by the `ptrace'
PTRACE_GETFPREGS request, which means our 64-bit handlers can be readily
used, as they already correctly handle the differences between o32 FP32
mode vs n32/n64 representations.
Adjust comments accordingly throughout, in particular remove a reference
to the r3000/tx39 MIPS I processor peculiarity, long irrelevant.
Add a test case to verify correctness. Avoid GCC bugs and limitations
in the test case where possible; the test case still fails to build with
GCC 8 and the o32 FP64 mode (i.e. with `-mips32r2 -mfp64' options)
giving:
mips-fpregset-core.c: In function 'main':
mips-fpregset-core.c:66:3: error: inconsistent operand constraints in an 'asm'
asm (
^~~
(GCC PR target/85909), but that is not a concern for us as yet, because
as noted above we do not currently support the o32 FP64 mode anyway.
gdb/
* mips-linux-tdep.h (mips_supply_fpregset, mips_fill_fpregset):
Remove prototypes.
* mips-linux-nat.c (supply_fpregset): Always call
`mips64_supply_fpregset' rather than `mips_supply_fpregset'.
(fill_fpregset): Always call `mips64_fill_fpregset' rather than
`mips_fill_fpregset'.
* mips-linux-tdep.c (mips_supply_fpregset)
(mips_supply_fpregset_wrapper, mips_fill_fpregset)
(mips_fill_fpregset_wrapper): Remove functions.
(mips64_supply_fpregset, mips64_fill_fpregset): Update comments.
(mips_linux_fpregset): Remove variable.
(mips_linux_iterate_over_regset_sections): Use
`mips64_linux_fpregset' in place of `mips_linux_fpregset'.
(mips_linux_o32_sigframe_init): Remove comment.
gdb/testsuite/
* gdb.arch/mips-fpregset-core.exp: New test.
* gdb.arch/mips-fpregset-core.c: New test source.
|
|
Tom Tromey
|
02d016b71f |
Update help text in tracepoint.c
This changes the help text of a couple of commands in tracepoint.c to follow the GNU style. ChangeLog 2018-04-29 Tom Tromey <tom@tromey.com> * tracepoint.c (_initialize_tracepoint): Update help text. testsuite/ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * gdb.trace/tfind.exp: Update help tests. |
|
Andrew Burgess
|
45f25d6c83 |
gdb: Restore selected frame in print_frame_local_vars
PR gdb/23203 reports 'bt full' causing the currently selected frame to change, this issue is fixed in this commit. Add a new class scoped_restore_selected_frame that saves and restores the selected frame. Make use of this in print_frame_local_vars to restore the selected frame on exit. gdb/ChangeLog: PR gdb/23203 * frame.c (scoped_restore_selected_frame::scoped_restore_selected_frame): Define. (scoped_restore_selected_frame::~scoped_restore_selected_frame): Define. * frame.h (class scoped_restore_selected_frame): New class. * stack.c (print_frame_local_vars): Remove catching and rethrowing of any exception, use scoped_restore_selected_frame to restore the frame instead. gdb/testsuite/ChangeLog: PR gdb/23203 * gdb.base/bt-selected-frame.c: New file. * gdb.base/bt-selected-frame.exp: New file. * lib/gdb.exp (get_current_frame_number): New function. |
|
|
Maciej W. Rozycki
|
d9f6d7f8b6 |
testsuite: Extend TLS core file testing with an OS-generated dump
Complementing commit
|
|
|
Tom Tromey
|
ff1cf532db |
Remove struct complain
At this point, struct complain is just holds a key, a value, and a "next" pointer to form a linked list. It's simpler to replace this with an unordered map. gdb/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * complaints.c (counters): New global. (struct complain): Remove. (struct complaints) <root>: Remove. (complaint_sentinel): Remove. (symfile_complaint_book): Update. (find_complaint) Remove. (complaint_internal, clear_complaints): Update. gdb/testsuite/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * gdb.gdb/complaints.exp (test_initial_complaints): Simplify. |
|
|
Tom Tromey
|
b98664d386 |
Remove symfile_complaints
The complaint system seems to allow for multiple different complaint topics. However, in practice only symfile_complaints has ever been defined. Seeing that complaints.c dates to 1992, and that no new complaints have been added in the intervening years, I think it is reasonable to admit that complaints are specifically related to debuginfo reading. This patch removes symfile_complaints and updates all the callers. Some of these spots should perhaps be calls to warning instead, but I did not make that change. gdb/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * complaints.c (symfile_complaints): Remove. (complaint_internal): Remove "complaints" parameter. (clear_complaints, vcomplaint): Remove "c" parameter. (get_complaints): Remove. * dwarf2read.c (dwarf2_statement_list_fits_in_line_number_section_complaint) (dwarf2_debug_line_missing_file_complaint) (dwarf2_debug_line_missing_end_sequence_complaint) (dwarf2_complex_location_expr_complaint) (dwarf2_const_value_length_mismatch_complaint) (dwarf2_section_buffer_overflow_complaint) (dwarf2_macro_malformed_definition_complaint) (dwarf2_invalid_attrib_class_complaint) (create_addrmap_from_index, dw2_symtab_iter_next) (dw2_expand_marked_cus) (dw2_debug_names_iterator::find_vec_in_debug_names) (dw2_debug_names_iterator::next, dw2_debug_names_iterator::next) (create_debug_type_hash_table, init_cutu_and_read_dies) (partial_die_parent_scope, add_partial_enumeration) (skip_one_die, fixup_go_packaging, quirk_rust_enum, process_die) (dwarf2_compute_name, dwarf2_physname, read_namespace_alias) (read_import_statement, read_file_scope, create_dwo_cu_reader) (create_cus_hash_table, create_dwp_hash_table) (inherit_abstract_dies, read_func_scope, read_call_site_scope) (dwarf2_rnglists_process, dwarf2_ranges_process) (dwarf2_add_type_defn, dwarf2_attach_fields_to_type) (dwarf2_add_member_fn, get_alignment, maybe_set_alignment) (handle_struct_member_die, process_structure_scope) (read_array_type, read_common_block, read_module_type) (read_tag_pointer_type, read_typedef, read_base_type) (read_subrange_type, load_partial_dies, partial_die_info::read) (partial_die_info::read, partial_die_info::read) (partial_die_info::read, read_checked_initial_length_and_offset) (dwarf2_string_attr, read_formatted_entries) (dwarf_decode_line_header) (lnp_state_machine::check_line_address, dwarf_decode_lines_1) (new_symbol, dwarf2_const_value_attr, lookup_die_type) (read_type_die_1, determine_prefix, dwarf2_get_ref_die_offset) (dwarf2_get_attr_constant_value, dwarf2_fetch_constant_bytes) (get_signatured_type, get_DW_AT_signature_type) (decode_locdesc, file_file_name, consume_improper_spaces) (skip_form_bytes, skip_unknown_opcode, dwarf_parse_macro_header) (dwarf_decode_macro_bytes, dwarf_decode_macros) (dwarf2_symbol_mark_computed, set_die_type) (read_attribute_value): Update. * stap-probe.c (handle_stap_probe, get_stap_base_address): Update. * dbxread.c (unknown_symtype_complaint) (lbrac_mismatch_complaint, repeated_header_complaint) (set_namestring, function_outside_compilation_unit_complaint) (read_dbx_symtab, process_one_symbol): Update. * gdbtypes.c (stub_noname_complaint): Update. * windows-nat.c (handle_unload_dll): Update. * coffread.c (coff_symtab_read, enter_linenos, decode_type) (decode_base_type): Update. * xcoffread.c (bf_notfound_complaint, ef_complaint) (eb_complaint, record_include_begin, record_include_end) (enter_line_range, xcoff_next_symbol_text, read_xcoff_symtab) (process_xcoff_symbol, read_symbol) (function_outside_compilation_unit_complaint) (scan_xcoff_symtab): Update. * machoread.c (macho_symtab_read, macho_add_oso_symfile): Update. * buildsym.c (finish_block_internal, make_blockvector) (end_symtab_get_static_block, augment_type_symtab): Update. * dtrace-probe.c (dtrace_process_dof) (dtrace_static_probe_ops::get_probes): Update. * complaints.h (struct complaint): Don't declare. (symfile_complaints): Remove. (complaint_internal): Remove "complaints" parameter. (complaint): Likewise. (clear_complaints): Likewise. * symfile.c (syms_from_objfile_1, finish_new_objfile) (reread_symbols): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program) (dwarf2_frame_cache, decode_frame_entry): Update. * dwarf2loc.c (dwarf_reg_to_regnum): Update. * objc-lang.c (lookup_objc_class, lookup_child_selector) (info_selectors_command): Update. * macrotab.c (macro_include, check_for_redefinition) (macro_undef): Update. * objfiles.c (filter_overlapping_sections): Update. * stabsread.c (invalid_cpp_abbrev_complaint) (reg_value_complaint, stabs_general_complaint, dbx_lookup_type) (define_symbol, error_type, read_type, rs6000_builtin_type) (stabs_method_name_from_physname, read_member_functions) (read_cpp_abbrev, read_baseclasses, read_tilde_fields) (attach_fields_to_type, complain_about_struct_wipeout) (read_range_type, read_args, common_block_start) (common_block_end, cleanup_undefined_types_1, scan_file_globals): Update. * mdebugread.c (index_complaint, unknown_ext_complaint) (basic_type_complaint, bad_tag_guess_complaint) (bad_rfd_entry_complaint, unexpected_type_code_complaint) (reg_value_complaint, parse_symbol, parse_type, upgrade_type) (parse_procedure, parse_lines) (function_outside_compilation_unit_complaint) (parse_partial_symbols, psymtab_to_symtab_1, cross_ref) (bad_tag_guess_complaint, reg_value_complaint): Update. * cp-support.c (demangled_name_complaint): Update. * macroscope.c (sal_macro_scope): Update. * dwarf-index-write.c (class debug_names): Update. gdb/testsuite/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * gdb.gdb/complaints.exp (test_initial_complaints): Don't mention symfile_complaints. (test_short_complaints): Likewise. (test_empty_complaints): Likewise. (test_initial_complaints): Update. |
|
|
Tom Tromey
|
4e9668d0d1 |
Remove "noisy" parameter from clear_complaints
After the previous patch, the "noisy" parameter to clear_complaints is no longer used, so this patch removes it. gdb/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * complaints.c (clear_complaints): Remove "noisy" parameter. * complaints.h (clear_complaints): Update. * symfile.c (syms_from_objfile_1, finish_new_objfile) (reread_symbols): Update. gdb/testsuite/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * gdb.gdb/complaints.exp (test_empty_complaints): Update. |
|
|
Tom Tromey
|
43ba33c768 |
Remove elements from complaint_series
I couldn't find a way to get complaints to use a couple of cases, and the difference between the actual printed output for these cases was minimal anyway. So, this patch removes a couple of constants from complaint_series, plus the associated code. gdb/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * complaints.c (enum complaint_series): Remove FIRST_MESSAGE, SUBSEQUENT_MESSAGE. (vcomplaint, clear_complaints): Update. (symfile_explanations): Remove some messages. gdb/testsuite/ChangeLog 2018-05-23 Tom Tromey <tom@tromey.com> * gdb.gdb/complaints.exp (test_serial_complaints): Remove. (test_short_complaints): Update. |
|
Pedro Alves
|
035522c022 |
Fix gdb.base/remote.exp with native-extended-gdbserver board
This fixes gdb.base/remote.exp regressions caused by the previous commit to the testcase, when tested with --target_board=native-extended-gdbserver. For example: ... show remote memory-write-packet-size The memory-write-packet-size is 0 (default). Packets are limited to 16383 bytes. (gdb) FAIL: gdb.base/remote.exp: write-packet default ... With that board, GDB connects to GDBserver at gdb_start time, so GDB is showing the actual remote/gdbserver packet size limits. Fix it using the usual "disconnect" pattern. While at it, there's no need to start GDB before compiling the testcase. gdb/testsuite/ChangeLog: 2018-05-22 Pedro Alves <palves@redhat.com> * gdb.base/remote.exp: Only gdb_start after compiling the testcase. Issue "disconnect" before testing "set remote" command defaults. Issue clean_restart before running to main. |
|
|
Pedro Alves
|
cc0be08f80 |
Handle "show remote memory-write-packet-size" when not connected
Currently "show remote memory-write-packet-size" says that the packet
size is limited to whatever is stored in the remote_state global, even
if not connected to a target.
When we get to support multiple instances of remote targets, there
won't be a remote_state global anymore, so that must be replaced by
something else.
Since it doesn't make sense to print the limit of the packet size of a
non-existing connection, this patch makes us say that the limit will
be further reduced when we connect.
The text is taken from the command's online help, which says:
"The actual limit is further reduced dependent on the target."
Note that a value of "0" is special, as per "help set remote
memory-write-packet-size":
~~~
Specify the number of bytes in a packet or 0 (zero) for the
default packet size.
~~~
I've tweaked "show remote memory-write-packet-size" to include
"(default)" in the output in that case, like this:
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 0 (default). The actual limit will be further reduced dependent on the target.
While working on this, I noticed that an explicit "set remote
write-packet-size 0" does not makes GDB go back to the exact same
state as the default state when GDB starts up:
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 0. [...]
^^
(gdb) set remote memory-write-packet-size 0
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 16384. [...]
^^^^^
The "16384" number comes from DEFAULT_MAX_MEMORY_PACKET_SIZE.
This happens because git commit
|
|
|
Pedro Alves
|
b1b60145ae |
Support UTF-8 identifiers in C/C++ expressions (PR gdb/22973)
Factor out cp_ident_is_alpha/cp_ident_is_alnum out of gdb/cp-name-parser.y and use it in the C/C++ expression parser too. New test included. gdb/ChangeLog: 2018-05-22 Pedro Alves <palves@redhat.com> 張俊芝 <zjz@zjz.name> PR gdb/22973 * c-exp.y: Include "c-support.h". (parse_number, c_parse_escape, lex_one_token): Use TOLOWER instead of tolower. Use c_ident_is_alpha to scan names. * c-lang.c: Include "c-support.h". (convert_ucn, convert_octal, convert_hex, convert_escape): Use ISXDIGIT instead of isxdigit and ISDIGIT instead of isdigit. * c-support.h: New file, with bits factored out from ... * cp-name-parser.y: ... this file. Include "c-support.h". (cp_ident_is_alpha, cp_ident_is_alnum): Deleted, moved to c-support.h and renamed. (symbol_end, yylex): Adjust. gdb/testsuite/ChangeLog: 2018-05-22 Pedro Alves <palves@redhat.com> PR gdb/22973 * gdb.base/utf8-identifiers.c: New file. * gdb.base/utf8-identifiers.exp: New file. |
|
Pedro Franco de Carvalho
|
0ec848ad25 |
[PowerPC] Recognize isa205 in linux core files
Currently the ppc linux core file target doesn't return target descriptions with the lager FPSCR introduced in isa205. This patch changes the core file target so that the auxv is read from the core file to determine the size of FPSCR, so that the appropriate target description is selected. gdb/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * arch/ppc-linux-common.c (ppc_linux_has_isa205): Change the parameter type to CORE_ADDR. * arch/ppc-linux-common.h (ppc_linux_has_isa205): Change the parameter type in declaration to CORE_ADDR. * ppc-linux-tdep.c (ppc_linux_core_read_description): Call target_auxv_search to get AT_HWCAP and use the result to get the target description. * ppc-linux-nat.c (ppc_linux_get_hwcap): Change the return type to CORE_ADDR. Remove the cast of the return value to unsigned long. Fix error predicate of target_auxv_search. (ppc_linux_nat_target::read_description): Change the type of the hwcap variable to CORE_ADDR. gdb/testsuite/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * gdb.arch/powerpc-fpscr-gcore.exp: New file. |
|
|
Pedro Franco de Carvalho
|
2c3305f6b0 |
[PowerPC] Fix VSX registers in linux core files
The functions used by the VSX regset to collect and supply registers from core files where incorrect. This patch changes the regset to use the standard regset collect/supply functions to fix this. The native target is also changed to use the same regset. gdb/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * ppc-linux-tdep.c (ppc_linux_vsxregset): New function. (ppc32_linux_vsxregmap): New global. (ppc32_linux_vsxregset): Initialize with ppc32_linux_vsxregmap, regcache_supply_regset, and regcache_collect_regset. * ppc-linux-tdep.h (ppc_linux_vsxregset): Declare. * ppc-linux-nat.c (supply_vsxregset, fill_vsxregset): Remove. (fetch_vsx_register, store_vsx_register): Remove. (fetch_vsx_registers): Add regno parameter. Get regset using ppc_linux_vsxregset. Use regset to supply registers. (store_vsx_registers): Add regno parameter. Get regset using ppc_linux_vsxregset. Use regset to collect registers. (fetch_register): Call fetch_vsx_registers instead of fetch_vsx_register. (store_register): Call store_vsx_registers instead of store_vsx_register. (fetch_ppc_registers): Call fetch_vsx_registers with -1 for the new regno parameter. (store_ppc_registers): Call store_vsx_registers with -1 for the new regno parameter. * rs6000-tdep.c (ppc_vsx_support_p, ppc_supply_vsxreget) (ppc_collect_vsxregset): Remove. gdb/testsuite/ChangeLog: 2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com> * gdb.arch/powerpc-vsx-gcore.exp: New file. |
|
|
Tom Tromey
|
ce1e8424c6 |
Show padding in ptype/o output
I was recently using ptype/o to look at the layout of some objects in gdb. I noticed that trailing padding was not shown -- but I wanted to be able to look at that, too. This patch changes ptype/o to also print trailing holes. Tested on x86-64 Fedora 26. gdb/ChangeLog 2018-05-18 Tom Tromey <tom@tromey.com> * c-typeprint.c (maybe_print_hole): New function. (c_print_type_struct_field_offset): Update. (c_type_print_base_struct_union): Call maybe_print_hole. gdb/testsuite/ChangeLog 2018-05-18 Tom Tromey <tom@tromey.com> * gdb.base/ptype-offsets.exp: Update. |
|
Keith Seitz
|
ddfe970e6b |
Don't elide all inlined frames
This patch essentially causes GDB to treat inlined frames like "normal"
frames from the user's perspective. This means, for example, that when a
user sets a breakpoint in an inlined function, GDB will now actually stop
"in" that function.
Using the test case from breakpoints/17534,
3 static inline void NVIC_EnableIRQ(int IRQn)
4 {
5 volatile int y;
6 y = IRQn;
7 }
8
9 __attribute__( ( always_inline ) ) static inline void __WFI(void)
10 {
11 __asm volatile ("nop");
12 }
13
14 int main(void) {
15
16 x= 42;
17
18 if (x)
19 NVIC_EnableIRQ(16);
20 else
21 NVIC_EnableIRQ(18);
(gdb) b NVIC_EnableIRQ
Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations)
(gdb) r
Starting program: 17534
Breakpoint 1, main () at 17534.c:19
19 NVIC_EnableIRQ(16);
Because skip_inline_frames currently skips every inlined frame, GDB "stops"
in the caller. This patch adds a new parameter to skip_inline_frames
that allows us to pass in a bpstat stop chain. The breakpoint locations
on the stop chain can be used to determine if we've stopped inside an inline
function (due to a user breakpoint). If we have, we do not elide the frame.
With this patch, GDB now reports that the inferior has stopped inside the
inlined function:
(gdb) r
Starting program: 17534
Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6
6 y = IRQn;
Many thanks to Jan and Pedro for guidance on this.
gdb/ChangeLog:
* breakpoint.c (build_bpstat_chain): New function, moved from
bpstat_stop_status.
(bpstat_stop_status): Add optional parameter, `stop_chain'.
If no stop chain is passed, call build_bpstat_chain to build it.
* breakpoint.h (build_bpstat_chain): Declare.
(bpstat_stop_status): Move documentation here from breakpoint.c.
* infrun.c (handle_signal_stop): Before eliding inlined frames,
build the stop chain and pass it to skip_inline_frames.
Pass this stop chain to bpstat_stop_status.
* inline-frame.c: Include breakpoint.h.
(stopped_by_user_bp_inline_frame): New function.
(skip_inline_frames): Add parameter `stop_chain'.
Move documention to inline-frame.h.
If non-NULL, use stopped_by_user_bp_inline_frame to determine
whether the frame should be elided.
* inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
Add moved documentation and update for new parameter.
gdb/testsuite/ChangeLog:
* gdb.ada/bp_inlined_func.exp: Update inlined frame locations
in expected breakpoint stop locations.
* gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
move to proper scope to test variable values.
* gdb.opt/inline-break.c (inline_func1, not_inline_func1)
(inline_func2, not_inline_func2, inline_func3, not_inline_func3):
New functions.
(main): Call not_inline_func3.
* gdb.opt/inline-break.exp: Start inferior and set breakpoints at
inline_func1, inline_func2, and inline_func3. Test that when each
breakpoint is hit, GDB properly reports both the stop location
and the backtrace. Repeat tests for temporary breakpoints.
|
|
|
Maciej W. Rozycki
|
0726fcc61a |
testsuite: Fix a `server_pid' access crash in gdb.server/server-kill.exp
Fix a commit
|
|
|
Andrew Burgess
|
8ee22052f6 |
gdb/x86: Handle kernels using compact xsave format
For GNU/Linux on x86-64, if the target is using the xsave format for passing the floating-point information from the inferior then there currently exists a bug relating to the x87 control registers, and the mxcsr register. The xsave format allows different floating-point features to be lazily enabled, a bit in the xsave format tells GDB which floating-point features have been enabled, and which have not. Currently in GDB, when reading the floating point state, we check the xsave bit flags, if the feature is enabled then we read the feature from the xsave buffer, and if the feature is not enabled, then we supply the default value from within GDB. Within GDB, when writing the floating point state, we first fetch the xsave state from the target and then, for any feature that is not yet enabled, we write the default values into the xsave buffer. Next we compare the regcache value with the value in the xsave buffer, and, if the value has changed we update the value in the xsave buffer, and mark the feature enabled in the xsave bit flags. The problem then, is that the x87 control registers were not following this pattern. We assumed that these registers were always written out by the kernel, and we always wrote them out to the xsave buffer (but didn't enabled the feature). The result of this is that if the kernel had not yet enabled the x87 feature then within GDB we would see random values for the x87 floating point control registers, and if the user tried to modify one of these register, that modification would be lost. Finally, the mxcsr register was also broken in the same way as the x87 control registers. The added complexity with this case is that the mxcsr register is part of both the avx and sse floating point feature set. When reading or writing this register we need to check that at least one of these features is enabled. This bug was present in native GDB, and within gdbserver. Both are fixed with this commit. gdb/ChangeLog: * common/x86-xstate.h (I387_FCTRL_INIT_VAL): New constant. (I387_MXCSR_INIT_VAL): New constant. * amd64-tdep.c (amd64_supply_xsave): Only read state from xsave buffer if it was supplied by the inferior. * i387-tdep.c (i387_supply_fsave): Use I387_MXCSR_INIT_VAL. (i387_xsave_get_clear_bv): New function. (i387_supply_xsave): Only read x87 control registers from the xsave buffer if the feature is enabled, and the state will have been written, otherwise, provide a suitable default. (i387_collect_xsave): Pre-clear all registers in xsave buffer, including x87 control registers. Update control registers if they have changed from the default value, and mark features as enabled as required. * i387-tdep.h (i387_xsave_get_clear_bv): Declare. gdb/gdbserver/ChangeLog: * i387-fp.c (i387_cache_to_xsave): Only write x87 control registers to the cache if their values have changed. (i387_xsave_to_cache): Provide default values for x87 control registers when these features are available, but disabled. * regcache.c (supply_register_by_name_zeroed): New function. * regcache.h (supply_register_by_name_zeroed): Declare new function. gdb/testsuite/ChangeLog: * gdb.arch/amd64-init-x87-values.S: New file. * gdb.arch/amd64-init-x87-values.exp: New file. |
|
Jan Kratochvil
|
7785df4880 |
watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests
gdb/testsuite/ChangeLog 2018-05-08 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.base/watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests. |
|
|
Tom Tromey
|
56bcdbea2b |
Let gdb.execute handle multi-line commands
This changes the Python API so that gdb.execute can now handle multi-line commands, like "commands" or "define". ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22730: * NEWS: Mention gdb.execute change. * gdbcmd.h (execute_control_command): Don't declare. * python/python.c (execute_gdb_command): Use read_command_lines_1, execute_control_commands, execute_control_commands_to_string. * cli/cli-script.h (execute_control_commands) (execute_control_commands_to_string): Declare. (execute_control_command): Add from_tty parameter. * cli/cli-script.c (execute_control_commands) (execute_control_commands_to_string): New functions. (execute_user_command): Use execute_control_commands. (execute_control_command_1): Add "from_tty" parameter. Update. (execute_control_command): Likewise. testsuite/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22730: * gdb.python/python.exp: Test multi-line execute. |
|
|
Tom Tromey
|
a913fffbde |
Allow breakpoint commands to be set from Python
This changes the Python API so that breakpoint commands can be set by writing to the "commands" attribute. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22731: * NEWS: Mention that breakpoint commands are writable. * python/py-breakpoint.c (bppy_set_commands): New function. (breakpoint_object_getset) <"commands">: Use it. doc/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22731: * python.texi (Breakpoints In Python): Mention that "commands" is writable. testsuite/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22731: * gdb.python/py-breakpoint.exp: Test setting breakpoint commands. |
|
|
Tom Tromey
|
7a2c85f259 |
Allow defining a user command inside a user command
PR gdb/11750 concerns defining a command inside a user commnad, like:
define outer
define inner
echo hi\n
end
end
This patch adds this capability to gdb.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/11750:
* cli/cli-script.h (enum command_control_type) <define_control>:
New constant.
* cli/cli-script.c (multi_line_command_p): Handle define_control.
(build_command_line, execute_control_command_1)
(process_next_line): Likewise.
(do_define_command): New function, extracted from define_command.
(define_command): Use it.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/11750:
* gdb.base/define.exp: Test defining a user command inside a user
command.
* gdb.base/commands.exp (define_if_without_arg_test): Test "define".
|
|
|
Jan Kratochvil
|
a3b60e4588 |
aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous ones
Some unaligned watchpoints were currently missed. On old kernels as specified in kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit) https://sourceware.org/bugzilla/show_bug.cgi?id=20207 after this patch some other unaligned watchpoints will get reported as false positives. With new kernels all the watchpoints should work exactly. There may be a regresion that it now less merges watchpoints so that with multiple overlapping watchpoints it may run out of the 4 hardware watchpoint registers. But as discussed in the original thread GDB needs some generic watchpoints merging framework to be used by all the target specific code. Even current FSF GDB code does not merge it perfectly. Also with the more precise watchpoints one can technically merge them less. And I do not think it matters too much to improve mergeability only for old kernels. Still even on new kernels some better merging logic would make sense. There remains one issue: kernel-4.15.14-300.fc27.armv7hl FAIL: gdb.base/watchpoint-unaligned.exp: continue FAIL: gdb.base/watchpoint-unaligned.exp: continue (gdb) continue Continuing. Unexpected error setting watchpoint: Invalid argument. (gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue But that looks as a kernel bug to me. (1) It is not a regression by this patch. (2) It is unrelated to this patch. gdb/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * NEWS: Mention Aarch64 watchpoint improvements. * aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed watchpoints and PR external/20207 watchpoints. * nat/aarch64-linux-hw-point.c (kernel_supports_any_contiguous_range): New. (aarch64_watchpoint_offset): New. (aarch64_watchpoint_length): Support PR external/20207 watchpoints. (aarch64_point_encode_ctrl_reg): New parameter offset, new asserts. (aarch64_point_is_aligned): Support PR external/20207 watchpoints. (aarch64_align_watchpoint): New parameters aligned_offset_p and next_addr_orig_p. Support PR external/20207 watchpoints. (aarch64_downgrade_regs): New. (aarch64_dr_state_insert_one_point): New parameters offset and addr_orig. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Update caller. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Support addr_orig and aligned_offset. (aarch64_linux_set_debug_regs): Remove const from state. Call aarch64_downgrade_regs. (aarch64_show_debug_reg_state): Print also dr_addr_orig_wp. * nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ... (DR_CONTROL_MASK): ... this. (struct aarch64_debug_reg_state): New field dr_addr_orig_wp. (unsigned int aarch64_watchpoint_offset): New prototype. (aarch64_linux_set_debug_regs): Remove const from state. * utils.c (align_up, align_down): Move to ... * common/common-utils.c (align_up, align_down): ... here. * utils.h (align_up, align_down): Move to ... * common/common-utils.h (align_up, align_down): ... here. gdb/gdbserver/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * linux-aarch64-low.c (aarch64_stopped_data_address): Likewise. gdb/testsuite/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * gdb.base/watchpoint-unaligned.c: New file. * gdb.base/watchpoint-unaligned.exp: New file. |
|
|
Andrew Burgess
|
45fe4a03b4 |
gdb: Make test names unique in gdb.base/maint.exp
Add prefixes or suffixes to some test names to make them unique. Replace a send_gdb/gdb_expect with a gdb_test, and make the test name unique. Remove test of 'help maint' as this is already covered by a later call to test_prefix_command_help. Removed test of 'help maint info' and add a new call to test_prefix_command_help instead. gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Make test names unique, use test_prefix_command_help to test 'help maint info', and remove repeated test of 'help maint'. |
|
|
Tom Tromey
|
9be2ae8fc6 |
Use previous count when 'x' command is repeated
About the 'x' command, the manual says:
If you use <RET> to repeat the 'x' command, the repeat count N is
used again; the other arguments default as for successive uses of
'x'.
However, PR gdb/22619 points out that this does not work.
This patch fixes the problem.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/22619:
* printcmd.c (last_count): New global.
(x_command): Use saved count when repeating.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/22619:
* gdb.base/long_long.exp (gdb_test_long_long): Add test for repeat
behavior.
|
|
|
Andrew Burgess
|
11859c310c |
gdb/testsuite: Handle targets with lots of registers
In gdb.base/maint.exp a test calls 'maint print registers'. If the target has lots of registers this may overflow expect's buffers, causing the test to fail. After this commit we process the output line at a time until we get back to the GDB prompt, this should prevent buffer overrun while still testing that the command works as required. gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Process output from 'maint print registers' line at a time. |
|
|
Andrew Burgess
|
089a949083 |
gdb/testsuite: Fix broken regexp in gdbstub case
When $use_gdb_stub is true then, when we start an MI target there's a
regexp to match GDB's startup pattern. Unfortunately the pattern is
broken, and we're also missing a timeout case in the match list (which
would have helped point out that the regexp was broken).
The changes to the regexp are:
1. Remove '${run_match}' prefix, the issued command doesn't include
'${run_prefix}' so expecting '${run_match}' is wrong.
2. Replaced '\\n' with '\\\\n' in order to match literal '\n' in
GDBs output (that is, match a backslash followed by 'n', not a
newline character).
3. Replaced a '.' (matching any character) with '\.' to match a '.'
and moved the '\.' into the correct place in the regexp.
4. Replaced '\r\n' with '[\r\n]+' to match the end of a line. This
change isn't esential, but matches the other end of line patterns
within this regexp.
Here's an example of the output that the regexp should match taken
from a testfile log, the first line is the command sent to GDB, and
the remaining lines are the response from GDB:
jump *_start
&"jump *_start\n"
~"Continuing at 0x10074.\n"
^running
*running,thread-id="all"
(gdb)
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_run_cmd_full): Fix regexp and add a
timeout.
|
|
|
Andrew Burgess
|
9b0797e268 |
gdb/testsuite: Filter out some registers for riscv
On riscv the cycle counter, and instructions retired counter CSRs are read only, this causes problems in the gdb.base/callfuncs.exp test, as the values in these CSRs change after an inferior call, the check that no target registers have been modified then fails. Luckily the test already has a mechanism in place for filtering out registers that are modified (and can't be restored) by an inferior call, so this commit adds the problem registers into this list for riscv. In the future we may end up needing to filter out more CSRs, but right now, for the targets I have access too, these are the only ones causing problems. gdb/testsuite/ChangeLog: * gdb.base/callfuncs.exp (fetch_all_registers): Add riscv register filter pattern. |
|
|
Pedro Alves
|
f6ac5f3d63 |
Convert struct target_ops to C++
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
|
|
Tom Tromey
|
77d3c63b0d |
Set test message in py-parameter.exp
Pedro pointed out that a test in py-parameter.exp had an empty message. This fixes it. testsuite/ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> * gdb.python/py-parameter.exp: Set test message. |
|
|
Tom Tromey
|
0489430a0e |
Handle var_zuinteger and var_zuinteger_unlimited from Python
PR python/20084 points out that the Python API doesn't handle the var_zuinteger and var_zuinteger_unlimited parameter types. This patch adds support for these types. Regression tested on x86-64 Fedora 26. ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> PR python/20084: * python/python.c (gdbpy_parameter_value): Handle var_zuinteger and var_zuinteger_unlimited. * python/py-param.c (struct parm_constant): Add PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED. (set_parameter_value): Handle var_zuinteger and var_zuinteger_unlimited. (add_setshow_generic): Likewise. (parmpy_init): Likewise. doc/ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> PR python/20084: * python.texi (Parameters In Python): Document PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED. testsuite/ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> PR python/20084: * gdb.python/py-parameter.exp: Add PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED tests. |
|
Dan Robertson
|
1632f8baf0 |
rust: Fix null deref when casting (PR 23124)
Fix a null dereference when casting a value to a unit type. ChangeLog 2018-04-28 Dan Robertson <danlrobertson89@gmail.com> PR rust/23124 * gdb/rust-exp.y (convert_params_to_types): Ensure that the params pointer is not null before dereferencing it. testsuite/ChangeLog 2018-04-28 Dan Robertson <danlrobertson89@gmail.com> PR rust/23124 * gdb.rust/expr.exp: Test that the unit type is correctly parsed when casting. |
|
|
Tom Tromey
|
6d7bb8246b |
Expose type alignment on gdb.Type
This adds an "alignof" attribute to gdb.Type in the Python API. 2018-04-30 Tom Tromey <tom@tromey.com> * NEWS: Mention Type.align. * python/py-type.c (typy_get_alignof): New function. (type_object_getset): Add "alignof". 2018-04-30 Tom Tromey <tom@tromey.com> * python.texi (Types In Python): Document Type.align. 2018-04-30 Tom Tromey <tom@tromey.com> * gdb.python/py-type.exp: Check align attribute. * gdb.python/py-type.c: New "aligncheck" global. |
|
|
Tom Tromey
|
007e153034 |
Handle alignof and _Alignof
This adds alignof and _Alignof to the C/C++ expression parser, and adds new tests to test the features. The tests are written to try to ensure that gdb's knowledge of alignment rules stays in sync with the compiler's. 2018-04-30 Tom Tromey <tom@tromey.com> PR exp/17095: * NEWS: Update. * std-operator.def (UNOP_ALIGNOF): New operator. * expprint.c (dump_subexp_body_standard) <case UNOP_ALIGNOF>: New. * eval.c (evaluate_subexp_standard) <case UNOP_ALIGNOF>: New. * c-lang.c (c_op_print_tab): Add alignof. * c-exp.y (ALIGNOF): New token. (exp): Add "ALIGNOF" production. (ident_tokens): Add _Alignof and alignof. 2018-04-30 Tom Tromey <tom@tromey.com> PR exp/17095: * gdb.dwarf2/dw2-align.exp: New file. * gdb.cp/align.exp: New file. * gdb.base/align.exp: New file. * lib/gdb.exp (gdb_int128_helper): New proc. (has_int128_c, has_int128_cxx): New caching procs. |
|
|
Tom Tromey
|
6873858b7e |
Add inclusive range support for Rust
This is version 2 of the patch to add inclusive range support for
Rust. I believe it addresses all review comments.
Rust recently stabilized the inclusive range feature:
https://github.com/rust-lang/rust/issues/28237
An inclusive range is an expression like "..= EXPR" or "EXPR ..=
EXPR". It is like an ordinary range, except the upper bound is
inclusive, not exclusive.
This patch adds support for this feature to gdb.
Regression tested on x86-64 Fedora 27.
2018-04-27 Tom Tromey <tom@tromey.com>
PR rust/22545:
* rust-lang.c (rust_inclusive_range_type_p): New function.
(rust_range): Handle inclusive ranges.
(rust_compute_range): Likewise.
* rust-exp.y (struct rust_op) <inclusive>: New field.
(DOTDOTEQ): New constant.
(range_expr): Add "..=" productions.
(operator_tokens): Add "..=" token.
(ast_range): Add "inclusive" parameter.
(convert_ast_to_expression) <case OP_RANGE>: Handle inclusive
ranges.
* parse.c (operator_length_standard) <case OP_RANGE>: Handle new
bounds values.
* expression.h (enum range_type) <NONE_BOUND_DEFAULT_EXCLUSIVE,
LOW_BOUND_DEFAULT_EXCLUSIVE>: New constants.
Update comments.
* expprint.c (print_subexp_standard): Handle new bounds values.
(dump_subexp_body_standard): Likewise.
2018-04-27 Tom Tromey <tom@tromey.com>
PR rust/22545:
* gdb.rust/simple.exp: Add inclusive range tests.
|
|
|
Pedro Alves
|
79188d8d27 |
Fix resolving GNU ifunc bp locations when inferior runs resolver
I noticed that if you set a breakpoint on an ifunc before the ifunc is
resolved, and then let the program call the ifunc, thus resolving it,
GDB end up with a location for that original breakpoint that is
pointing to the ifunc target, but it is left pointing to the first
address of the function, instead of after its prologue. After
prologue is what you get if you create a new breakpoint at that point.
1) With no debug info for the target function:
1.a) Set before resolving, and then program continued passed resolving:
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000400753 <final>
1.b) Breakpoint set after inferior resolved ifunc:
Num Type Disp Enb Address What
2 breakpoint keep y 0x0000000000400757 <final+4>
2) With debug info for the target function:
1.a) Set before resolving, and then program continued passed resolving:
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000400753 in final at gdb/testsuite/gdb.base/gnu-ifunc-final.c:20
1.b) Breakpoint set after inferior resolved ifunc:
Num Type Disp Enb Address What
2 breakpoint keep y 0x000000000040075a in final at gdb/testsuite/gdb.base/gnu-ifunc-final.c:21
The problem is that elf_gnu_ifunc_resolver_return_stop (called by the
internal breakpoint that traps the resolver returning) does not agree
with linespec.c:minsym_found. It does not skip to the function's
start line (i.e., past the prologue). We can now use the
find_function_start_sal overload added by the previous commmit to fix
this.
New tests included, which fail before the patch, and pass afterwards.
gdb/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Use
find_function_start_sal instead of find_pc_line.
gdb/testsuite/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* gdb.base/gnu-ifunc.exp (set-break): Test that GDB resolves
ifunc breakpoint locations correctly of ifunc breakpoints set
while the program resolves the ifunc.
|
|
|
Pedro Alves
|
c7075ad503 |
Extend GNU ifunc testcases
This patch extends/rewrites the gdb.base/gnu-ifunc.exp testcase to cover the many different fixes in earlier patches. (This was actually what encovered most of the problems.) The current testcase uses an ifunc symbol with the same name as the ifunc resolver symbol and makes sure to compile the ifunc resolver without debug info. That does not model how ifuncs are implemented in gcc/ifunc nowadays. Instead, what we have is that the glibc ifunc resolvers nowadays are written in C and end up with debug info. Also, in some cases the ifunc target is written in assembly, but in other cases it's written in C. In the case of target function written in C, if the target function has debug info, when we set a break on the ifunc, we want to set it past the prologue of the target function. Currently GDB gets that wrong. To make sure we cover all the different scenarios, the testcase is tweaked to cover all the different combinations of - An ifunc resolver with the same name as the user-visible symbol vs an ifunc resolver with a different name as the user-visible symbol. - ifunc resolver compiled with and without debug info. - ifunc target function compiled with and without debug info. The testcase currently sets breakpoints on ifuncs, calls ifunc functions, steps into ifunc functions, etc. After this series, this all works and the testcase passes cleanly. While working on this, I noticed that "b gnu_ifunc" before and after the inferior resolved the ifunc would end up with a breakpoint with different locations. That's now covered by new tests inside the new "set-break" procedure. It also tests other things like making sure we can't call an ifunc without a return-type case if we don't know the type of the target. And making sure that we pass enough arguments when we do know the type. gdb/testsuite/ChangeLog: 2018-04-26 Pedro Alves <palves@redhat.com> * gdb.base/gnu-ifunc-final.c: New file. * gdb.base/gnu-ifunc.c (final): Delete, moved to gnu-ifunc-final.c. * gdb.base/gnu-ifunc.exp (executable): Delete. (staticexecutable): Adjust. (lib_opts, exec_opts): Delete. (make_binsuffix, build, set-break): New procedures. (misc_tests): New, with tests factored out from the top level. (top level): Test different combinations of ifunc resolver name, resolver with and with debug info, and ifunc target with and without debug info. Wrap static tests with with_target_prefix. |
|
|
Pedro Alves
|
8388016d7f |
Calling ifunc functions when target has no debug info but resolver has
After the previous patch, on Fedora 27 (glibc 2.26), if you try
calling strlen in the inferior, you now get:
(top-gdb) p strlen ("hello")
'__strlen_avx2' has unknown return type; cast the call to its declared return type
This is correct, because __strlen_avx2 is written in assembly.
We can improve on this though -- if the final ifunc resolved/target
function has no debug info, but the ifunc _resolver_ does have debug
info, we can try extracting the final function's type from the type
that the resolver returns. E.g.,:
typedef size_t (*strlen_t) (const char*);
size_t my_strlen (const char *) { /* some implementation */ }
strlen_t strlen_resolver (unsigned long hwcap) { return my_strlen; }
extern size_t strlen (const char *s);
__typeof (strlen) strlen __attribute__ ((ifunc ("strlen_resolver")));
In the strlen example above, the resolver returns strlen_t, which is a
typedef for pointer to a function that returns size_t. "strlen_t" is
the type of both the user-visible "strlen", and of the the target
function that implements it.
This patch teaches GDB to extract that type.
This is done for actual inferior function calls (in infcall.c), and
for ptype (in eval_call). By the time we get to either of these
places, we've already lost the original symbol/minsym, and only have
values and types to work with. Hence the changes to c-exp.y and
evaluate_var_msym_value, to ensure that we propagate the ifunc
minsymbol's info.
The change to make ifunc symbols have no/unknown return type exposes a
latent problem -- gdb.compile/compile-ifunc.exp calls a no-debug-info
function, but we did not warn about it. The test is fixed by this
commit too.
gdb/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* blockframe.c (find_gnu_ifunc_target_type): New function.
(find_function_type): New.
* eval.c (evaluate_var_msym_value): For GNU ifunc types, always
return a value with a memory address.
(eval_call): For calls to GNU ifunc functions, try to find the
type of the target function from the type that the resolver
returns.
* gdbtypes.c (objfile_type): Don't install a return type for ifunc
symbols.
* infcall.c (find_function_return_type): Delete.
(find_function_addr): Add 'function_type' parameter. For calls to
GNU ifunc functions, try to find the type of the target function
from the type that the resolver returns, and return it via
FUNCTION_TYPE.
(call_function_by_hand_dummy): Adjust to use the function type
returned by find_function_addr.
(find_function_addr): Add 'function_type' parameter and move
description here.
* symtab.h (find_function_type, find_gnu_ifunc_target_type): New
declarations.
gdb/testsuite/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* gdb.compile/compile-ifunc.exp: Also expect "function has unknown
return type" warnings.
|
|
|
Pedro Alves
|
249b573352 |
Fix new inferior events output
Since
|
|
Sergio Durigan Junior
|
f67c0c9171 |
Enable 'set print inferior-events' and improve detach/fork/kill/exit messages
This patch aims to turn 'set print inferior-events' always on, and do
some cleanup on the messages printed by GDB when various inferior
events happen (attach, detach, fork, kill, exit).
To make sure that the patch is correct, I've tested it with a handful
of combinations of 'set follow-fork-mode', 'set detach-on-fork' and
'set print inferior-events'. In the end, I decided to make my
hand-made test into an official testcase. More on that below.
Using the following program as an example:
#include <unistd.h>
int main ()
{
fork ();
return 0;
}
We see the following outputs from the patched GDB:
- With 'set print inferior-events on':
(gdb) r
Starting program: a.out
[Detaching after fork from child process 27749]
[Inferior 1 (process 27745) exited normally]
(gdb)
- With 'set print inferior-events off':
(gdb) r
Starting program: a.out
[Inferior 1 (process 27823) exited normally]
(gdb)
Comparing this against an unpatched GDB:
- With 'set print inferior-events off' and 'set follow-fork-mode
child':
(gdb) r
Starting program: a.out
[Inferior 2 (process 5993) exited normally]
(gdb)
Compare this against an unpatched GDB:
(unpatched-gdb) r
Starting program: a.out
[New process 5702]
[Inferior 2 (process 5702) exited normally]
(unpatched-gdb)
It is possible to notice that, in this scenario, the patched GDB
will lose the '[New process %d]' message.
- With 'set print inferior-events on', 'set follow-fork-mode child'
and 'set detach-on-fork on':
(gdb) r
Starting program: a.out
[Attaching after process 27905 fork to child process 27909]
[New inferior 2 (process 27909)]
[Detaching after fork from parent process 27905]
[Inferior 1 (process 27905) detached]
[Inferior 2 (process 27909) exited normally]
(gdb)
Compare this output with an unpatched GDB, using the same settings:
(unpatched-gdb) r
Starting program: a.out
[New inferior 28033]
[Inferior 28029 detached]
[New process 28033]
[Inferior 2 (process 28033) exited normally]
[Inferior 28033 exited]
(unpatched-gdb)
As can be seen above, I've also made a few modifications to messages
that are printed when 'set print inferior-events' is on. For example,
a few of the messages did not contain the '[' and ']' as
prefix/suffix, which led to a few inconsistencies like:
Attaching after process 22995 fork to child process 22999.
[New inferior 22999]
Detaching after fork from child process 22999.
[Inferior 22995 detached]
[Inferior 2 (process 22999) exited normally]
So I took the opportunity and included the square brackets where
applicable. I have also made the existing messages more uniform, by
always printing "Inferior %d (process %d)..." where applicable. This
makes it easier to identify the inferior number and the PID number
from the messages.
As suggested by Pedro, the "[Inferior %d exited]" message from
'exit_inferior' has been removed, because it got duplicated when
'inferior-events' is on. I'm also using the
'add_{thread,inferior}_silent' versions (instead of their verbose
counterparts) on some locations, also to avoid duplicated messages.
For example, a patched GDB with 'set print inferior-events on', 'set
detach-on-fork on' and 'set follow-fork-mode child', but using
'add_thread', would print:
(gdb) run
Starting program: a.out
[Attaching after process 25088 fork to child process 25092.]
[New inferior 25092] <--- duplicated
[Detaching after fork from child process 25092.]
[Inferior 25088 detached]
[New process 25092] <--- duplicated
[Inferior 2 (process 25092) exited normally]
But if we use 'add_thread_silent' (with the same configuration as
before):
(gdb) run
Starting program: a.out
[Attaching after process 31606 fork to child process 31610]
[New inferior 2 (process 31610)]
[Detaching after fork from parent process 31606]
[Inferior 1 (process 31606) detached]
[Inferior 2 (process 31610) exited normally]
As for the tests, the configuration options being exercised are:
- follow-fork-mode: child/parent
- detach-on-fork: on/off
- print inferior-events: on/off
It was also necessary to perform adjustments on several testcases,
because the expected messages changed considerably.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print message when inferior has
been killed.
* inferior.c (print_inferior_events): Remove 'static'. Set as
'1'.
(add_inferior): Improve message printed when
'print_inferior_events' is on.
(exit_inferior): Remove message printed when
'print_inferior_events' is on.
(detach_inferior): Improve message printed when
'print_inferior_events' is on.
(initialize_inferiors): Use 'add_inferior_silent' to set
'current_inferior_'.
* inferior.h (print_inferior_events): Declare here as
'extern'.
* infrun.c (follow_fork_inferior): Print '[Attaching...]' or
'[Detaching...]' messages when 'print_inferior_events' is on.
Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
as prefix/suffix for messages. Remove periods. Fix erroneous
'Detaching after fork from child...', replace it by '... from
parent...'.
(handle_vfork_child_exec_or_exit): Add '[' and ']' as
prefix/suffix when printing 'Detaching...' messages. Print
them when 'print_inferior_events' is on.
* remote.c (remote_detach_1): Print message when detaching
from inferior and '!is_fork_parent'.
gdb/testsuite/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.base/attach.exp: Likewise.
* gdb.base/catch-syscall.exp (check_for_program_end): Adjust
"gdb_continue_to_end".
(test_catch_syscall_with_wrong_args): Likewise.
* gdb.base/foll-fork.exp: Adjust regexps to match '[' and
']'. Don't set 'verbose' on.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.c: New file.
* gdb.base/fork-print-inferior-events.exp: New file.
* gdb.base/hook-stop.exp: Adjust regexps to expect for new
'[Inferior ... has been killed]' message.
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.base/solib-overlap.exp: Adjust regexps to expect for new
detach message.
* gdb.threads/kill.exp: Adjust regexps to expect for new kill
message.
* gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.threads/process-dies-while-detaching.exp: Likewise.
|
|
Simon Marchi
|
0a8ddac418 |
info-shared.exp: Replace libs=-ldl with shlib_load
As reported in PR 23104, -ldl doesn't work on FreeBSD. Replace it with shlib_load, which adds the right flags for dynamic library loading based on the current target platform. The test still passes on Linux, and should now pass on FreeBSD, though I did not test personally. gdb/testsuite/ChangeLog: PR gdb/23104 * gdb.base/info-shared.exp: Replace libs=-ldl with shlib_load. |
|
Rajendra SY
|
db86b02b3a |
Fixed test case to compile & run on FreeBSD
Problems: 1. linking -dl lib on FreeBSD platform 2. backtrace from ld-elf shows r_debug_state() instead of _dl_debug_state() Cause: 1. There is no dl library on FreeBSD platform test has to ignore linking "-ldl" 2. The stop due to a shared library event shows backtrace frame #0 function as r_debug_state() gdb/ChangeLog: PR gdb/23095 * gdb/testsuite/gdb.base/break-probes.exp: Pass shlib_load to prepare_for_testing. Set normal_bp to r_debug_state if target is bsd. |
|
Richard Bunt
|
d27d16bfdc |
Add test case for a known hang in infrun
The hang occurs when GDB tries to call inferior functions on two different threads with scheduler-locking turned on. The first call works fine, with the call to infrun_async(1) causing the signal_handler to be marked and the event to be handled, but then the event loop resets the "ready" member to zero, while leaving infrun_is_async set to 1. As a result, GDB hangs if the user switches to another thread and calls a second function because calling infrun_async(1) a second time has no effect, meaning the inferior call events are never handled. The added test case provokes the above issue. gdb/testsuite/ChangeLog: * gdb.threads/multiple-successive-infcall.c: New test. * gdb.threads/multiple-successive-infcall.exp: New file. |
|
|
Tom Tromey
|
a037790ec5 |
Fix crash in quirk_rust_enum
I noticed that quirk_rust_enum can crash when presented with a union whose fields are all scalar types. This patch adds a new test case and fixes the bug. Regression tested on Fedora 26 x86-64. 2018-04-17 Tom Tromey <tom@tromey.com> * dwarf2read.c (quirk_rust_enum): Handle unions correctly. 2018-04-17 Tom Tromey <tom@tromey.com> * gdb.rust/simple.rs (Union): New type. (main): New local "u". * gdb.rust/simple.exp (test_one_slice): Add new test case. |
|
Andreas Arnez
|
e3a91079b5 |
Adjust more test cases to changed output of info var/func/type
After this commit:
|
|
|
Andreas Arnez
|
b744723f57 |
Show line numbers in output for "info var/func/type"
The GDB commands "info variables", "info functions", and "info types" show the appropriate list of definitions matching the given pattern. They also group them by source files. But no line numbers within these source files are shown. The line number information is particularly useful to the user when a simple "grep" doesn't readily point to a definition. This is often the case when the definition involves a macro, occurs within a namespace, or when the identifier appears very frequently in the source file. This patch enriches the printout of these commands by the line numbers and adjusts affected test cases to the changed output where necessary. The new output looks like this: (gdb) i variables All defined variables: File foo.c: 3: const char * const foo; 1: int x; The line number is followed by a colon and a tab character, which is then followed by the symbol definition. If no line number is available, the tab is printed out anyhow, so definitions line up. gdb/ChangeLog: * symtab.c (print_symbol_info): Precede the symbol definition by the line number when available. * NEWS: Advertise this enhancement. gdb/doc/ChangeLog: * gdb.texinfo (Symbols): Mention the fact that "info variables/functions/types" show source files and line numbers. gdb/testsuite/ChangeLog: * gdb.ada/info_types.exp: Adjust expected output to the line numbers now printed by "info var/func/type". * gdb.base/completion.exp: Likewise. * gdb.base/included.exp: Likewise. * gdb.cp/cp-relocate.exp: Likewise. * gdb.cp/cplusfuncs.exp: Likewise. * gdb.cp/namespace.exp: Likewise. * gdb.dwarf2/dw2-case-insensitive.exp: Likewise. |
|
Markus Metzger
|
4a4495d62d |
btrace: set/show record btrace cpu
Add new set/show commands to set the processor that is used for enabling errata workarounds when decoding branch trace. The general format is "<vendor>:<identifier>" but we also allow two special values "auto" and "none". The default is "auto", which is the current behaviour of having GDB determine the processor on which the trace was recorded. If that cpu is not known to the trace decoder, e.g. when using an old decoder on a new system, decode may fail with "unknown cpu". In most cases it should suffice to 'downgrade' decode to assume an older cpu. Unfortunately, we can't do this automatically. The other special value, "none", disables errata workarounds. gdb/ * NEWS (New options): announce set/show record btrace cpu. * btrace.c: Include record-btrace.h. (btrace_compute_ftrace_pt): Skip enabling errata workarounds if the vendor is unknown. (btrace_compute_ftrace_1): Add cpu parameter. Update callers. Maybe overwrite the btrace configuration's cpu. (btrace_compute_ftrace): Add cpu parameter. Update callers. (btrace_fetch): Add cpu parameter. Update callers. (btrace_maint_update_pt_packets): Call record_btrace_get_cpu. Maybe overwrite the btrace configuration's cpu. Skip enabling errata workarounds if the vendor is unknown. * python/py-record-btrace.c: Include record-btrace.h. (recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history) (recpy_bt_function_call_history): Call record_btrace_get_cpu. * record-btrace.c (record_btrace_cpu_state_kind): New. (record_btrace_cpu): New. (set_record_btrace_cpu_cmdlist): New. (record_btrace_get_cpu): New. (require_btrace_thread, record_btrace_info) (record_btrace_resume_thread): Call record_btrace_get_cpu. (cmd_set_record_btrace_cpu_none): New. (cmd_set_record_btrace_cpu_auto): New. (cmd_set_record_btrace_cpu): New. (cmd_show_record_btrace_cpu): New. (_initialize_record_btrace): Initialize set/show record btrace cpu commands. * record-btrace.h (record_btrace_get_cpu): New. testsuite/ * gdb.btrace/cpu.exp: New. doc/ * gdb.texinfo: Document set/show record btrace cpu. |
|
|
Markus Metzger
|
1d509aa625 |
infrun: step through indirect branch thunks
With version 7.3 GCC supports new options
-mindirect-branch=<choice>
-mfunction-return=<choice>
The choices are:
keep behaves as before
thunk jumps through a thunk
thunk-external jumps through an external thunk
thunk-inline jumps through an inlined thunk
For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function. On a return thunk, GDB would stop inside the
thunk.
Make GDB step through such thunks instead.
Before:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
30 }
After:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
23 return x + 1;
This is independent of the step-mode. In order to step into the thunk,
you would need to use stepi.
When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk). Not sure whether this is worth optimizing.
Thunk detection is implemented via gdbarch. I implemented the methods for
IA. Other architectures may run into unexpected fails.
The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture. They may need
adjustments when we add support for more architectures. Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.
When using an older GCC, the tests will fail to build and will be reported
as untested:
Running .../gdb.base/step-indirect-call-thunk.exp ...
gdb compile failed, \
gcc: error: unrecognized command line option '-mindirect-branch=thunk'
gcc: error: unrecognized command line option '-mfunction-return=thunk'
=== gdb Summary ===
# of untested testcases 1
gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.
testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.
|
|
|
Simon Marchi
|
6295b6da16 |
Add test for following fork on position-independent executables
Commit
|
|
|
Tom Tromey
|
50146e7022 |
Add Rust test case for ".." struct initializer
Building with --coverage pointed out that there was no Rust test for initializing a structure using the ".." initializer. This patch adds such a test. Regression tested on x86-64 Fedora 26. 2018-04-11 Tom Tromey <tom@tromey.com> * gdb.rust/simple.exp: Add test for ".." struct initializer. |
|
|
Pedro Alves
|
f50d8a2eae |
Fix gdb.base/fork-running-state.exp race
On my multi-target branch I was occasionaly seeing a FAIL like this:
(gdb) PASS: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: non-stop: kill parent
[Inferior 2 (process 32672) exited normally]
kill inferior 2
warning: Inferior ID 2 is not running.
(gdb) FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: non-stop: kill child (the program exited)
... other similar fails ...
Turns out to be a testcase bug/race. A tweak like this increases the
changes of hitting the race substancially:
--- a/gdb/testsuite/gdb.base/fork-running-state.c
+++ b/gdb/testsuite/gdb.base/fork-running-state.c
@@ -29,7 +29,7 @@ fork_child (void)
{
while (1)
{
- sleep (1);
+ usleep (100);
The testcase has two processes, parent and child fork. The problem is
that the child exits itself if it notices the parent is gone, but the
testcase .exp does not expect that.
I first wrote a patch that handled the different combinations of
non-stop/detach-on-fork/follow-fork/schedule-multiple, making the .exp
file know when to expect the child to exit itself vs when to kill it
explicitly, but the result was that the code to kill the parent and
child was getting about as large as the test code that is the actual
point of the testcase, above the kills.
So I scratched that approach and came up with a simpler patch --
simply make the child not exit itself when the parent exits.
The .exp file is going to kill both parent and child explicitly, and,
main() already calls alarm() as a safeguard. I don't think we lose
anything.
gdb/testsuite/ChangeLog:
2018-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/fork-running-state.c (fork_child): Don't exit if parent
exits. Instead loop running forever.
(fork_parent): Run forever too.
|