This adjusts the record targets to tell the core whether a trap was
caused by a breakpoint. Targets that can do this should report
breakpoint traps with the PC already adjusted, so this removes the
re-incrementing record-full was doing.
These targets need to be adjusted before process_stratum targets
beneath are, otherwise target_supports_stopped_by_sw_breakpoint,
etc. would fall through to the target beneath while
recording/replaying, and the core would get confused.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* btrace.h: Include target/waitstatus.h.
(struct btrace_thread_info) <stop_reason>: New field.
* record-btrace.c (record_btrace_step_thread): Use
record_check_stopped_by_breakpoint instead of breakpoint_here_p.
(record_btrace_decr_pc_after_break): Delete.
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint): New functions.
(init_record_btrace_ops): Install them.
* record-full.c (record_full_hw_watchpoint): Delete and replace
with ...
(record_full_stop_reason): ... this throughout.
(record_full_exec_insn): Adjust.
(record_full_wait_1): Adjust. No longer re-increment the PC.
(record_full_wait_1): Adjust. Use
record_check_stopped_by_breakpoint instead of breakpoint_here_p.
(record_full_stopped_by_watchpoint): Adjust.
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): New functions.
(init_record_full_ops, init_record_full_core_ops): Install them.
* record.c (record_check_stopped_by_breakpoint): New function.
* record.h: Include target/waitstatus.h.
(record_check_stopped_by_breakpoint): New declaration.
The "record function-call-history" command prints the range of source lines
for a function segment when given the /l modifier. This information is
computed for the entire execution history when processing the recorded branch
trace.
To speed up the initial trace processing, we compute the information when
we print a function segment and only if requested. The computation is fast
enough (due to the limited scope) that it is not worth storing the data in
struct btrace_function, anymore.
gdb/
* btrace.h (btrace_function) <lbegin, lend>: Remove.
* btrace.c (ftrace_debug): Do not print the line range.
(ftrace_skip_file, ftrace_update_lines): Remove.
(ftrace_new_function): Remove lbegin and lend initialization.
(btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
* record-btrace.c (btrace_compute_src_line_range): New.
(btrace_call_history_src_line): Call btrace_compute_src_line_range.
Indicate gaps in the trace due to decode errors. Internally, a gap is
represented as a btrace function segment without instructions and with a
non-zero format-specific error code.
Show the gap when traversing the instruction or function call history.
Also indicate gaps in "info record".
It looks like this:
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64KB.
Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182).
(gdb) record function-call-history /cli
1 fib inst 1,9 at src/fib.c:9,14
2 fib inst 10,20 at src/fib.c:6,14
3 [decode error (1): instruction overflow]
4 fib inst 21,28 at src/fib.c:11,14
5 fib inst 29,33 at src/fib.c:6,9
(gdb) record instruction-history 20,22
20 0x000000000040062f <fib+47>: sub $0x1,%rax
[decode error (1): instruction overflow]
21 0x0000000000400613 <fib+19>: add $0x1,%rax
22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip)
(gdb)
Gaps are ignored during reverse execution and replay.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_find_call): Skip gaps.
(ftrace_new_function): Initialize level.
(ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
(ftrace_new_switch): Update
level computation.
(ftrace_new_gap): New.
(ftrace_update_function): Create new function after gap.
(btrace_compute_ftrace_bts): Create gap on error.
(btrace_stitch_bts): Update parameters. Clear trace if it
becomes empty.
(btrace_stitch_trace): Update parameters. Update callers.
(btrace_clear): Reset the number of gaps.
(btrace_insn_get): Return NULL if the iterator points to a gap.
(btrace_insn_number): Return zero if the iterator points to a gap.
(btrace_insn_end): Allow gaps at the end.
(btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
(btrace_find_insn_by_number): Assert that the found iterator does
not point to a gap.
(btrace_call_next, btrace_call_prev): Assert that the last function
is not a gap.
* btrace.h (btrace_bts_error): New.
(btrace_function): Update comment.
(btrace_function) <insn, insn_offset, number>: Update comment.
(btrace_function) <errcode>: New.
(btrace_thread_info) <ngaps>: New.
(btrace_thread_info) <replay>: Update comment.
(btrace_insn_get): Update comment.
* record-btrace.c (btrace_ui_out_decode_error): New.
(record_btrace_info): Print number of gaps.
(btrace_insn_history, btrace_call_history): Call
btrace_ui_out_decode_error for gaps.
(record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
testsuite/
* gdb.btrace/buffer-size.exp: Update "info record" output.
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add the instruction's size as well as a coarse classification to struct
btrace_insn. Use the information in ftrace_update_function and
ftrace_find_call.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_insn_class): New.
(btrace_insn) <size, iclass>: New.
* btrace.c (ftrace_find_call): Update parameters. Update users.
Use instruction classification.
(ftrace_new_return): Update parameters. Update users.
(ftrace_update_function): Update parameters. Update users. Use
instruction classification.
(ftrace_update_insns): Update parameters. Update users.
(ftrace_classify_insn): New.
(btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
TRY_CATCH around call to gdb_insn_length.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a structure to hold the branch trace data and an enum to describe
the format of that data. So far, only BTS is supported. Also added
a NONE format to indicate that no branch trace data is available.
This will make it easier to support different branch trace formats in
the future.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (SFILES): Add common/btrace-common.c.
(COMMON_OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* btrace.c (parse_xml_btrace): Update parameters.
(parse_xml_btrace_block): Set format field.
(btrace_add_pc, btrace_fetch): Use struct btrace_data.
(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
(btrace_compute_ftrace): Split into this and...
(btrace_compute_ftrace_bts): ...this.
(btrace_stitch_trace): Split into this and...
(btrace_stitch_bts): ...this.
* btrace.h (parse_xml_btrace): Update parameters.
(make_cleanup_btrace_data): New.
* common/btrace-common.c: New.
* common/btrace-common.h: Include common-defs.h.
(btrace_block_s): Update comment.
(btrace_format): New.
(btrace_format_string): New.
(btrace_data_bts): New.
(btrace_data): New.
(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
* remote.c (remote_read_btrace): Update parameters.
* target.c (target_read_btrace): Update parameters.
* target.h (target_read_btrace): Update parameters.
(target_ops)<to_read_btrace>: Update parameters.
* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
* target-delegates.c: Regenerate.
* target-debug (target_debug_print_struct_btrace_data_p): New.
* nat/linux-btrace.c (linux_read_btrace): Split into this and...
(linux_read_bts): ...this.
* nat/linux-btrace.h (linux_read_btrace): Update parameters.
gdbserver/
* Makefile.in (SFILES): Add common/btrace-common.c.
(OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* linux-low: Include btrace-common.h.
(linux_low_read_btrace): Use struct btrace_data. Call
btrace_data_init and btrace_data_fini.
Provide to_resume and to_wait target methods for the btrace record target
to allow reverse stepping and replay support.
Replay is limited in the sense that only stepping and source correlation
are supported. We do not record data and thus can not show variables.
Non-stop mode is not working. Do not allow record-btrace in non-stop mode.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_thread_flag): New.
(struct btrace_thread_info) <flags>: New.
* record-btrace.c (record_btrace_resume_thread)
(record_btrace_find_thread_to_move, btrace_step_no_history)
(btrace_step_stopped, record_btrace_start_replaying)
(record_btrace_step_thread, record_btrace_decr_pc_after_break)
(record_btrace_find_resume_thread): New.
(record_btrace_resume, record_btrace_wait): Extend.
(record_btrace_can_execute_reverse): New.
(record_btrace_open): Fail in non-stop mode.
(record_btrace_set_replay): Split into this, ...
(record_btrace_stop_replaying): ... this, ...
(record_btrace_clear_histories): ... and this.
(init_record_btrace_ops): Init to_can_execute_reverse.
* NEWS: Announce it.
testsuite/
* gdb.btrace/delta.exp: Check reverse stepi.
* gdb.btrace/tailcall.exp: Update. Add stepping tests.
* gdb.btrace/finish.exp: New.
* gdb.btrace/next.exp: New.
* gdb.btrace/nexti.exp: New.
* gdb.btrace/record_goto.c: Add comments.
* gdb.btrace/step.exp: New.
* gdb.btrace/stepi.exp: New.
* gdb.btrace/multi-thread-step.c: New.
* gdb.btrace/multi-thread-step.exp: New.
* gdb.btrace/rn-dl-bind.c: New.
* gdb.btrace/rn-dl-bind.exp: New.
* gdb.btrace/data.c: New.
* gdb.btrace/data.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo: Document limited reverse/replay support
for target record-btrace.
The btrace record target shows the branch trace from the location of the first
branch destination. This is the first BTS records.
After adding incremental updates, we can now add a dummy record for the current
PC when we enable tracing so we show the trace from the location where branch
tracing has been enabled.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c: Include regcache.h.
(btrace_add_pc): New.
(btrace_enable): Call btrace_add_pc.
(btrace_is_empty): New.
* btrace.h (btrace_is_empty): New.
* record-btrace.c (require_btrace, record_btrace_info): Call
btrace_is_empty.
testsuite/
* gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
* gdb.btrace/exception.exp: Update.
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/record_goto.exp: Update.
* gdb.btrace/tailcall.exp: Update.
* gdb.btrace/unknown_functions.exp: Update.
* gdb.btrace/delta.exp: New.
Add a branch trace instruction iterator pointing to the current replay position
to the branch trace thread info struct.
Free the iterator when btrace is cleared.
Start at the replay position for the instruction and function-call histories.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (replay) <replay>: New.
(btrace_is_replaying): New.
* btrace.c (btrace_clear): Free replay iterator.
(btrace_is_replaying): New.
* record-btrace.c (record_btrace_is_replaying): New.
(record_btrace_info): Print insn number if replaying.
(record_btrace_insn_history): Start at replay position.
(record_btrace_call_history): Start at replay position.
(init_record_btrace_ops): Init to_record_is_replaying.
The branch trace is represented as 3 vectors:
- a block vector
- a instruction vector
- a function vector
Each vector (except for the first) is computed from the one above.
Change this into a graph where a node represents a sequence of instructions
belonging to the same function and where we have three types of edges to connect
the function segments:
- control flow
- same function (instance)
- call stack
This allows us to navigate in the branch trace. We will need this for "record
goto" and reverse execution.
This patch introduces the data structure and computes the control flow edges.
It also introduces iterator structs to simplify iterating over the branch trace
in control-flow order.
It also fixes PR gdb/15240 since now recursive calls are handled correctly.
Fix the test that got the number of expected fib instances and also the
function numbers wrong.
The current instruction had been part of the branch trace. This will look odd
once we start support for reverse execution. Remove it. We still keep it in
the trace itself to allow extending the branch trace more easily in the future.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (struct btrace_func_link): New.
(enum btrace_function_flag): New.
(struct btrace_inst): Rename to ...
(struct btrace_insn): ...this. Update all users.
(struct btrace_func) <ibegin, iend>: Remove.
(struct btrace_func_link): New.
(struct btrace_func): Rename to ...
(struct btrace_function): ...this. Update all users.
(struct btrace_function) <segment, flow, up, insn, insn_offset)
(number, level, flags>: New.
(struct btrace_insn_iterator): Rename to ...
(struct btrace_insn_history): ...this.
Update all users.
(struct btrace_insn_iterator, btrace_call_iterator): New.
(struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
(struct btrace_target_info) <begin, end, level>
<insn_history, call_history>: New.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* btrace.c (btrace_init_insn_iterator)
(btrace_init_func_iterator, compute_itrace): Remove.
(ftrace_print_function_name, ftrace_print_filename)
(ftrace_skip_file): Change
parameter to const.
(ftrace_init_func): Remove.
(ftrace_debug): Use new btrace_function fields.
(ftrace_function_switched): Also consider gaining and
losing symbol information).
(ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
(ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
(ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
New.
(ftrace_new_function): Move. Remove debug print.
(ftrace_update_lines, ftrace_update_insns): New.
(ftrace_update_function): Check for call, ret, and jump.
(compute_ftrace): Renamed to ...
(btrace_compute_ftrace): ...this. Rewritten to compute call
stack.
(btrace_fetch, btrace_clear): Updated.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* record-btrace.c (require_btrace): Use new btrace thread
info fields.
(record_btrace_info, btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range):
Use new btrace thread info fields and new iterator.
(btrace_func_history_src_line): Rename to ...
(btrace_call_history_src_line): ...this. Use new btrace
thread info fields.
(btrace_func_history): Rename to ...
(btrace_call_history): ...this. Use new btrace thread info
fields and new iterator.
(record_btrace_call_history, record_btrace_call_history_range):
Use new btrace thread info fields and new iterator.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected function
trace.
* gdb.btrace/instruction_history.exp: Initialize traced.
Remove traced_functions.
Add a function to parse a btrace xml document into a vector of branch trace
blocks.
gdb/
* features/btrace.dtd: New file.
* Makefile.in (XMLFILES): Add btrace.dtd.
* btrace.h (parse_xml_btrace): New declaration.
* btrace.c: Include xml-support.h.
(parse_xml_btrace): New function.
(parse_xml_btrace_block): New function.
(block_attributes): New struct.
(btrace_attributes): New struct.
(btrace_children): New struct.
(btrace_elements): New struct.
Pedro Alves