Commit Graph

240 Commits

Author SHA1 Message Date
Pedro Alves 51d481464e Fix PR backtrace/15558
This PR is about an assertion failure in GDB that can be triggered by
setting "backtrace limit" to a value that causes GDB to stop unwinding
after an inline frame.  In this case, an assertion in
inline_frame_this_id will trigger:

  /* We need a valid frame ID, so we need to be based on a valid
     frame.  (...).  */
  gdb_assert (frame_id_p (*this_id));

Looking at the function:

 static void
 inline_frame_this_id (struct frame_info *this_frame,
		       void **this_cache,
		       struct frame_id *this_id)
 {
   struct symbol *func;

   /* In order to have a stable frame ID for a given inline function,
      we must get the stack / special addresses from the underlying
      real frame's this_id method.  So we must call get_prev_frame.
      Because we are inlined into some function, there must be previous
      frames, so this is safe - as long as we're careful not to
      create any cycles.  */
   *this_id = get_frame_id (get_prev_frame (this_frame));

we see we're computing the frame id for the inline frame.  If this is
an inline frame, which is a virtual frame constructed based on debug
info, on top of a real stack frame, we should _always_ be able to find
where the frame was inlined into, as that ultimately just means
peeling off the virtual frames on top of the real stack frame.  If
there ultimately was no prev (real) stack frame, then we wouldn't have
been able to construct the inline frame either, by design.  That's
what the assertion catches.

So we have an inline frame, we should _always_ be able to compute its
ID, even if that means bypassing the user backtrace limits to get at
the real stack frame's info.  The problem is that inline_frame_id
calls get_prev_frame, and that takes user backtrace limits into
account.  Code that wants to bypass the limits calls get_prev_frame_1
instead.

Note how get_prev_frame_1 already skips all checks for inline frames:

   /* If we are unwinding from an inline frame, all of the below tests
      were already performed when we unwound from the next non-inline
      frame.  We must skip them, since we can not get THIS_FRAME's ID
      until we have unwound all the way down to the previous non-inline
      frame.  */
   if (get_frame_type (this_frame) == INLINE_FRAME)
     return get_prev_frame_if_no_cycle (this_frame);

And note how the related frame_unwind_caller_id function also uses
get_prev_frame_1:

 struct frame_id
 frame_unwind_caller_id (struct frame_info *next_frame)
 {
   struct frame_info *this_frame;

   /* Use get_prev_frame_1, and not get_prev_frame.  The latter will truncate
      the frame chain, leading to this function unintentionally
      returning a null_frame_id (e.g., when a caller requests the frame
      ID of "main()"s caller.  */

   next_frame = skip_artificial_frames (next_frame);
   this_frame = get_prev_frame_1 (next_frame);
   if (this_frame)
     return get_frame_id (skip_artificial_frames (this_frame));
   else
     return null_frame_id;
 }

get_prev_frame_1 is currently static in frame.c.  As a _1 suffix is
not a good name for an extern function, I've renamed it.

Tested on x86-64 Fedora 17.

gdb/
2014-04-18  Pedro alves  <palves@redhat.com>
	    Tom Tromey  <tromey@redhat.com>

	PR backtrace/15558
	* frame.c (get_prev_frame_1): Rename to ...
	(get_prev_frame_always): ... this, and make extern.  Adjust.
	(skip_artificial_frames): Use get_prev_frame_always.
	(frame_unwind_caller_id, frame_pop, get_prev_frame)
	(get_frame_unwind_stop_reason): Adjust to rename.
	* frame.h (get_prev_frame_always): Declare.
	* inline-frame.c: Include frame.h.
	(inline_frame_this_id): Use get_prev_frame_always.

gdb/testsuite/
2014-04-18  Tom Tromey  <palves@redhat.com>
	    Pedro alves  <tromey@redhat.com>

	PR backtrace/15558
	* gdb.opt/inline-bt.exp: Test backtracing from an inline function
	with a backtrace limit.
	* gdb.python/py-frame-inline.exp: Test running to an inline
	function with a backtrace limit, and printing the newest frame.
	* gdb.python/py-frame-inline.c (main): Call f.
2014-04-18 10:34:09 +01:00
Markus Metzger 8372a7cb96 frame: add frame_id_build_unavailable_stack_special
Add a function to build a frame_id for a frame with unavailable stack
and with a special identifier address.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* frame.h (frame_id_build_unavailable_stack_special): New.
	* frame.c (frame_id_build_unavailable_stack_special): New.
2014-01-16 12:45:11 +01:00
Joel Brobecker ecd75fc8ee Update Copyright year range in all files maintained by GDB. 2014-01-01 07:54:24 +04:00
Pedro Alves 5ce0145de7 "tfind" across unavailable-stack frames.
Like when stepping, the current stack frame location is expected to be
printed as result of tfind command, if that results in moving to a
different function.  In tfind_1 we see:

  if (from_tty
      && (has_stack_frames () || traceframe_number >= 0))
    {
      enum print_what print_what;

      /* NOTE: in imitation of the step command, try to determine
         whether we have made a transition from one function to
         another.  If so, we'll print the "stack frame" (ie. the new
         function and it's arguments) -- otherwise we'll just show the
         new source line.  */

      if (frame_id_eq (old_frame_id,
                       get_frame_id (get_current_frame ())))
        print_what = SRC_LINE;
      else
        print_what = SRC_AND_LOC;

      print_stack_frame (get_selected_frame (NULL), 1, print_what, 1);
      do_displays ();
    }

However, when we haven't collected any registers in the tracepoint
(collect $regs), that doesn't actually work:

 (gdb) tstart
 (gdb) info tracepoints
 Num     Type           Disp Enb Address    What
 1       tracepoint     keep y   0x080483b7 in func0
                                            at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28
         collect testload
     installed on target
 2       tracepoint     keep y   0x080483bc in func1
                                            at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32
         collect testload
     installed on target
 (gdb) c
 Continuing.

 Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72
 72    }
 (gdb) tstop
 (gdb) tfind start
 Found trace frame 0, tracepoint 1
 #0  func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28
 28    }
 (gdb) tfind
 Found trace frame 1, tracepoint 2
 32    }
 (gdb)

When we don't have info about the stack available
(UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID.
And in the scenario above, the issue is that both frames before and
after the second tfind (the frames for func0 an func1) have the same
id (outer_frame_id), so the frame_id_eq check returns false, even
though the frames were of different functions.  GDB knows that,
because the PC is inferred from the tracepoint's address, even if no
registers were collected.

To fix this, this patch adds support for frame ids with a valid code
address, but <unavailable> stack address, and then makes the unwinders
use that instead of the catch-all outer_frame_id for such frames.  The
frame_id_eq check in tfind_1 then automatically does the right thing
as expected.

I tested with --directory=gdb.trace/ , before/after the patch, and
compared the resulting gdb.logs, then adjusted the tests to expect the
extra output that came out.  Turns out that was only circ.exp, the
original test that actually brought this issue to light.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2013-12-17  Pedro Alves  <palves@redhat.com>

	* frame.h (enum frame_id_stack_status): New enum.
	(struct frame_id) <stack_addr>: Adjust comment.
	<stack_addr_p>: Delete field, replaced with ...
	<stack_status>: ... this new field.
	(frame_id_build_unavailable_stack): Declare.
	* frame.c (frame_addr_hash, fprint_field, outer_frame_id)
	(frame_id_build_special): Adjust.
	(frame_id_build_unavailable_stack): New function.
	(frame_id_build, frame_id_build_wild): Adjust.
	(frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into
	account frames with unavailable stack.

	* amd64-tdep.c (amd64_frame_this_id)
	(amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use
	frame_id_build_unavailable_stack.
	* dwarf2-frame.c (dwarf2_frame_this_id): Likewise.
	* i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id)
	(i386_sigtramp_frame_this_id):  Likewise.

gdb/testsuite/
2013-12-17  Pedro Alves  <palves@redhat.com>

	* gdb.trace/circ.exp: Expect frame info to be printed when
	switching between frames with unavailable stack, but different
	functions.
2013-12-17 20:47:36 +00:00
Pedro Alves 782d47dfbd Fix "info frame" in the outermost frame.
Doing "info frame" in the outermost frame, when that was indicated by
the next frame saying the unwound PC is undefined/not saved, results
in error and incomplete output:

 (gdb) bt
 #0  thread_function0 (arg=0x0) at threads.c:63
 #1  0x00000034cf407d14 in start_thread (arg=0x7ffff7fcb700) at pthread_create.c:309
 #2  0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115

 (gdb) frame 2
 #2  0x000000323d4f168d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
 115             call    *%rax

 (gdb) info frame
 Stack level 2, frame at 0x0:
  rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip Register 16 was not saved
 (gdb)

Not saved register values are treated as optimized out values
internally throughout.  stack.c:frame_info is handing unvailable
values, but not optimized out ones.  The patch deletes the
frame_unwind_caller_pc_if_available wrapper function and instead lets
errors propagate to frame_info (it's only user).

As frame_unwind_pc now needs to be able to handle and cache two
different error scenarios, the prev_pc.p variable is replaced with an
enumeration.

(FWIW, I looked into making gdbarch_unwind_pc or a variant return
struct value's instead, but it results in lots of boxing and unboxing
for no real gain -- e.g., the mips and arm implementations need to do
computation on the unboxed PC value.  Might as well throw an error on
first attempt to get at invalid contents.)

After the patch, we get:

 (gdb) info frame
 Stack level 2, frame at 0x0:
  rip = 0x323d4f168d in clone (../sysdeps/unix/sysv/linux/x86_64/clone.S:115); saved rip = <not saved>
  Outermost frame: outermost
  caller of frame at 0x7ffff7fcafc0
  source language asm.
  Arglist at 0x7ffff7fcafb8, args:
  Locals at 0x7ffff7fcafb8, Previous frame's sp is 0x7ffff7fcafc8
 (gdb)

A new test is added.  It's based off dw2-reg-undefined.exp, and tweaked to
mark the return address (rip) of "stop_frame" as undefined.

Tested on x86_64 Fedora 17.

gdb/
2013-12-06  Pedro Alves  <palves@redhat.com>

	* frame.c (enum cached_copy_status): New enum.
	(struct frame_info) <prev_pc.p>: Change type to enum
	cached_copy_status.
	(fprint_frame): Handle not saved and unavailable prev_pc values.
	(frame_unwind_pc_if_available): Delete and merge contents into ...
	(frame_unwind_pc): ... here.  Handle OPTIMIZED_OUT_ERROR.  Adjust
	to use enum cached_copy_status.
	(frame_unwind_caller_pc_if_available): Delete.
	(create_new_frame): Adjust.
	* frame.h (frame_unwind_caller_pc_if_available): Delete
	declaration.
	* stack.c (frame_info): Use frame_unwind_caller_pc instead of
	frame_unwind_caller_pc_if_available, and handle
	NOT_AVAILABLE_ERROR and OPTIMIZED_OUT_ERROR errors.
	* valprint.c (val_print_optimized_out): Use val_print_not_saved.
	(val_print_not_saved): New function.
	* valprint.h (val_print_not_saved): Declare.

gdb/testsuite/
2013-12-06  Pedro Alves  <palves@redhat.com>

	* gdb.dwarf2/dw2-undefined-ret-addr.S: New file.
	* gdb.dwarf2/dw2-undefined-ret-addr.c: New file.
	* gdb.dwarf2/dw2-undefined-ret-addr.exp: New file.
2013-12-06 19:50:10 +00:00
Pedro Alves 08d72866c0 PR gdb/15911: "info threads" changes the default source and line (for "break", "list")
"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...

 (gdb) b start
 (gdb) c
 ...
 (gdb) list
 *lists "start"*
 (gdb) b 23
 Breakpoint 3 at 0x400614: file test.c, line 23.
 (gdb) info threads
   Id   Target Id         Frame
 * 2    Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
   1    Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
 (gdb) b 23
 Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
                                    ^^^^^^^^^^^^^^^
 (gdb) list
 93          lll_wait_tid (pd->tid);
 94
 95
 96        /* Restore cancellation mode.  */
 97        CANCEL_RESET (oldtype);
 98
 99        /* Remove the handler.  */
 100       pthread_cleanup_pop (0);
 101
 102

The issue is that print_stack_frame always sets the current sal to the
frame's sal.  print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION.  Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO.  What we have is two logically
distinct operations mixed in the same function(s):

  #1 - print frame, in the format specified by {print_what,
    print_level and print_args}.

  #2 - We're displaying a frame to the user, and I want the default
    sal to point here, because the program stopped here, or the user
    did some context-changing command (up, down, etc.).

So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.

Tested on x86_64 Fedora 17.

gdb/
2013-09-17  Pedro Alves  <palves@redhat.com>

	PR gdb/15911
	* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
	* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
	* corelow.c (core_open):
	* frame.h (print_stack_frame, print_frame_info): New
	'set_current_sal' parameter.
	* infcmd.c (finish_command, kill_command): Adjust call to
	print_stack_frame.
	* inferior.c (inferior_command): Likewise.
	* infrun.c (normal_stop): Likewise.
	* linux-fork.c (linux_fork_context): Likewise.
	* record-full.c (record_full_goto_entry, record_full_restore):
	Likewise.
	* remote-mips.c (common_open): Likewise.
	* stack.c (print_stack_frame): New 'set_current_sal' parameter.
	Use it.
	(print_frame_info): New 'set_current_sal' parameter.  Set the last
	displayed sal depending on the new paremeter instead of looking at
	print_what.
	(backtrace_command_1, select_and_print_frame, frame_command)
	(current_frame_command, up_command, down_command): Adjust call to
	print_stack_frame.
	* thread.c (print_thread_info, restore_selected_frame)
	(do_captured_thread_select): Adjust call to print_stack_frame.
	* tracepoint.c (tfind_1): Likewise.
	* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
	(mi_cmd_stack_info_frame): Likewise.
	* mi/mi-interp.c (mi_on_normal_stop): Likewise.
	* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.

	gdb/testsuite/
	* gdb.threads/info-threads-cur-sal-2.c: New file.
	* gdb.threads/info-threads-cur-sal.c: New file.
	* gdb.threads/info-threads-cur-sal.exp: New file.
2013-09-17 18:26:41 +00:00
Pedro Alves adfd8245d8 frame.h: Delete stale declaration.
This is declaring a function that no longer exists.  It was deleted
back in 2003-01-13:

        ...
        show_and_print_stack_frame, print_only_stack_frame_stub,
	print_only_stack_frame): Delete functions.

gdb/
2013-08-30  Pedro Alves  <palves@redhat.com>

	* frame.h (show_and_print_stack_frame): Delete declaration.
2013-08-30 15:26:04 +00:00
Yao Qi 82a0a75ff0 gdb/
* frame.h (read_frame_local): Declare.
	* mi/mi-cmd-stack.c (list_args_or_locals): Call
	read_frame_local.
	* stack.c (read_frame_local): New.

gdb/testsuite/

	* gdb.trace/mi-trace-unavailable.exp: Don't set
	"print entry-values" to "no".
	(test_trace_unavailable): Set various values to
	"print entry-values" to test that the output of
	'-stack-list-locals' is not affected, and then set
	set "print entry-values" to "no".
2013-08-08 05:10:10 +00:00
Pedro Alves c1f7d745c8 Garbage collect deprecated_pc_in_call_dummy
I noticed there are no users of deprecated_pc_in_call_dummy left in
the tree.

The last user was ARM.  Usage removed here:

http://sourceware.org/ml/gdb-patches/2010-03/msg00820.html

This deletes the function.

2013-02-01  Pedro Alves  <palves@redhat.com>

	* dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
	* frame.h (deprecated_pc_in_call_dummy): Delete declaration.
2013-02-01 19:58:04 +00:00
Joel Brobecker 28e7fd6234 Update years in copyright notice for the GDB files.
Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.
2013-01-01 06:33:28 +00:00
Joel Brobecker ca9d61b90f rename frame_register_read into deprecated_frame_register_read.
gdb/ChangeLog:

        * frame.h (deprecated_frame_register_read): Renames
        frame_register_read.
        * frame.c (deprecated_frame_register_read): Renames
        frame_register_read.  Update all callers.
        * i386-tdep.c: Update all callers of frame_register_read.
        * infcmd.c: Likewise.
        * jit.c: Likewise.
        * mips-tdep.c: Likewise.
        * mt-tdep.c: Likewise.
        * sh64-tdep.c: Likewise.
2012-11-12 21:59:07 +00:00
Joel Brobecker b2c7d45a4c Document replacement for frame_register_read (deprecated).
gdb/ChangeLog:

        * frame.h (frame_register_read): Remove FIXME comment.
        * frame.c (frame_register_read): Add suggestion explaining
        which function to use in place of this one.
2012-11-12 21:28:51 +00:00
Jan Kratochvil 193facb37d gdb/
Code cleanup - rename 'inline' depth to 'artificial' depth.
	* breakpoint.c (set_momentary_breakpoint): Rename at a caller to
	frame_id_artificial_p, extend the comment.
	* dwarf2-frame-tailcall.c (tailcall_frame_this_id): Rename at a user.
	* frame.c (fprint_frame_id): Rename at a user, change debug output
	text to "artificial=".
	(skip_inlined_frames): Rename to ...
	(skip_artificial_frames): ... here.  Extend the comment.
	(get_stack_frame_id, frame_unwind_caller_id): Rename at a caller.
	(frame_id_inlined_p): Rename to ...
	(frame_id_artificial_p): ... here.  Rename at a user.
	(frame_id_eq, frame_id_inner, frame_unwind_caller_pc)
	(frame_unwind_caller_pc_if_available, frame_unwind_caller_arch): Rename
	at a user.
	* frame.h (struct frame_id): Rename inline_depth to artificial_depth.
	Extend the comment.
	(frame_id_inlined_p): Rename to ...
	(frame_id_artificial_p): ... here.
	* inline-frame.c (inline_frame_this_id): Rename at a user.
2012-09-17 07:03:14 +00:00
Yao Qi ccce17b060 gdb/
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
	(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
	* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
	(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
	(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* frame.c (frame_debug): Add 'unsigned'.
	(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* frame.h: Update the declaration of 'frame_debug'.
	* gdbtypes.c (overload_debug): Add 'unsigned'.
	(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* inferior.h: Update declaration of 'debug_infrun'.
	* infrun.c (debug_infrun): Add 'unsigned'.
	(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* jit.c (jit_debug): Add 'unsigned'.
	(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* linux-nat.c (debug_linux_nat): Add 'unsigned'.
	(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
	(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* machoread.c (mach_o_debug_level): Add 'unsigned'.
	(_initialize_machoread): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
	* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
	(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
	intead of add_setshow_zinteger_cmd.
	* mips-tdep.c (mips_debug): Add 'unsigned'.
	(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* monitor.c (monitor_debug): Add 'unsigned'.
	(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* observer.c (observer_debug): Add 'unsigned'.
	(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* parse.c (expressiondebug): Add 'unsigned'.
	(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* record.c (record_debug): Add 'unsigned'.
	(_initialize_record): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* record.h: Update the declaration of 'record_debug'.
	* stap-probe.c (stap_expression_debug): Add 'unsigned'.
	(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* serial.c (global_serial_debug_p): Add 'unsigned'.
	(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
	(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* solib-frv.c (solib_frv_debug): Add 'unsigned'.
	(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* target.c (targetdebug): Add 'unsigned'.
	(initialize_targets): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* valops.c (overload_debug): Add 'unsigned'.
	* varobj.c (varobjdebug): Add 'unsigned'.
	(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
	add_setshow_zinteger_cmd.
	* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
	(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.

	* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
	* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
	(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
	instead of add_setshow_zinteger_cmd.
	* gdbarch.c, gdbarch.h: Re-generated.
2012-08-02 09:36:40 +00:00
Joel Brobecker 263689d88a Fix typo in frame.h:read_frame_register_unsigned function description.
gdb/ChangeLog:

	* frame.h (read_frame_register_unsigned): Fix typo in function
	description.
2012-03-01 22:47:46 +00:00
Pedro Alves ad5f7d6ef7 2012-03-01 Pedro Alves <palves@redhat.com>
PR gdb/13767

	gdb/
	* frame.c (read_frame_register_unsigned): New.
	* frame.h (read_frame_register_unsigned): Declare.
	* i387-tdep.c (print_i387_status_word): New parameter `status_p'.
	Handle it.
	(print_i387_control_word): New parameter `control_p'.  Handle it.
	(i387_print_float_info): Handle unavailable float registers.

	gdb/testsuite/
	* gdb.trace/unavailable.exp (gdb_unavailable_floats): New.
	(gdb_collect_globals_test): Call it.
2012-03-01 20:49:02 +00:00
Joel Brobecker 0b30217134 Copyright year update in most files of the GDB Project.
gdb/ChangeLog:

        Copyright year update in most files of the GDB Project.
2012-01-04 08:17:56 +00:00
Kevin Pouget 2231f1fb60 Move unwind reasons to an external .def file
gdb/
	* frame.c (frame_stop_reason_string): Rewrite using
	unwind_stop_reasons.def.
	* frame.h (enum unwind_stop_reason): Likewise.
	* python/py-frame.c (gdbpy_initialize_frames): Likewise.
	(gdbpy_frame_stop_reason_string): Use new enum unwind_stop_reason
	constants for bound-checking.
	* unwind_stop_reasons.def: New file.
	* stack.c (backtrace_command_1): Handle UNWIND_FIRST_ERROR as an alias
	instead of a distinct value.

doc/
	* gdb.texinfo ((Frames In Python): Document
	gdb.FRAME_UNWIND_FIRST_ERROR contant.
2011-10-27 11:04:27 +00:00
Phil Muldoon 9df2fbc4c1 2011-10-20 Phil Muldoon <pmuldoon@redhat.com>
PR python/12656

	* python/py-frame.c (frapy_read_var): Use const struct *block.
	* python/py-type.c (typy_lookup_typename): Likewise.
	(typy_lookup_type): Likewise.
	(typy_legacy_template_argument): Likewise.
	(typy_template_argument): Likewise.
	(gdbpy_lookup_type): Likewise.
	* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
	* python/py-block.c (blpy_block_object): Likewise.
	(blpy_iter): Likewise.
	(blpy_get_start): Likewise.
	(blpy_get_end): Likewise.
	(blpy_get_function): Likewise.
	(blpy_get_superblock): Likewise.
	(set_block):  Likewise.
	(block_to_block_object): Likewise.
	(block_object_to_block): Likewise.
	(blpy_is_valid): Likewise.
	(blpy_get_global_block): New function.
	(blpy_get_static_block): New function.
	(blpy_is_global): New function.
	(blpy_is_static): New function.
	* blockframe.c (block_innermost_frame): Likewise.
	* valops.c (value_of_variable): Likewise.
	* frame.h: Update prototypes.
	* python/python-internal.h: Likewise.
	* value.h: Likewise.

2011-10-20  Phil Muldoon  <pmuldoon@redhat.com>

	PR python/12656

	* gdb.texinfo (Blocks In Python): Document is_static, is_global,
	global_block, static_block function.

2011-10-20  Phil Muldoon  <pmuldoon@redhat.com>

	PR python/12656

	* gdb.python/py-block.exp: Add is_global, is_static, static_block,
	global_block tests.
2011-10-20 12:31:30 +00:00
Jan Kratochvil e18b27534c gdb/
Display @entry parameter values (without references).
	* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
	New functions.
	* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
	New declarations.
	* dwarf2loc.c (dwarf2_find_location_expression): Support location list
	entry record.
	(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
	(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
	functions.
	(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
	(loclist_read_variable_at_entry): New function.
	(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
	* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
	DW_AT_location, call dwarf_block_to_sp_offset for it.
	* frame.h (print_entry_values_no, print_entry_values_only)
	(print_entry_values_preferred, print_entry_values_if_needed)
	(print_entry_values_both, print_entry_values_compact)
	(print_entry_values_default, print_entry_values): New declarations.
	(struct frame_arg): New field entry_kind.
	(read_frame_arg): New parameter entryargp.
	* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
	arg->entry_kind.  Optionally print the `@entry' suffix.
	(list_args_or_locals): New variable entryarg, initialize it.
	Initialize also entry_kind of arg and entryarg.  Conditionalize
	list_arg_or_local for arg, add list_arg_or_local for entryarg.  Call
	xfree for entryarg.error.
	* stack.c (print_entry_values_no, print_entry_values_only)
	(print_entry_values_preferred, print_entry_values_if_needed)
	(print_entry_values_both, print_entry_values_compact)
	(print_entry_values_default, print_entry_values_choices)
	(print_entry_values): New variables.
	(print_frame_arg): New gdb_assert for arg->entry_kind.  Optionally
	print the `@entry' suffix, possibly in combination for
	print_entry_values_compact.
	(read_frame_arg): New parameter entryargp, new variables entryval,
	entryval_error and val_equal.  Read in also entryargp, respect
	print_entry_values, compare the values using val_equal, fill in also
	argp->entry_kind (together with entryargp->entry_kind).
	(print_frame_args): New variable entryarg, initialize it.
	Conditionalize print_frame_arg for arg, add print_frame_arg for
	entryarg.  Call xfree for entryarg.error.
	(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
	* symtab.h (struct symbol_computed_ops): New field
	read_variable_at_entry.

gdb/doc/
	Display @entry parameter values (without references).
	* gdb.texinfo (Tail Call Frames): Add anchor.  Add self tail call
	example.
	(Print Settings): New description of set print entry-values and show
	print entry-values.

gdb/testsuite/
	Display @entry parameter values (without references).
	* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
	(different, validity, invalid): New functions.
	(main): Call them.
	* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
	stacktest, breakhere_stacktest, different, breakhere_different,
	breakhere_validity and breakhere_invalid.
	(entry: bt): Update for @entry.
	(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
	(entry_validity: *, entry_invalid: *): Many new tests.
	* gdb.base/break.exp
	(run until breakpoint set at small function, optimized file): Accept
	also the @entry suffix.
	* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
	* gdb.mi/mi2-amd64-entry-value.c: New files.
	* gdb.mi/mi2-amd64-entry-value.exp: New files.
2011-10-09 19:34:19 +00:00
Jan Kratochvil 93d86cefdf gdb/
Code reshuffle.
	* frame.h (struct frame_arg): New definition.
	(read_frame_arg): New declaration.
	* mi/mi-cmd-stack.c (list_arg_or_local): New functiom from ...
	(list_args_or_locals): ... the code here.  New variable arg, call
	read_frame_arg and list_arg_or_local with it.  Unify the
	PRINT_SIMPLE_VALUES and PRINT_ALL_VALUES cases.  Call xfree for
	arg.error.
	* stack.c (print_frame_arg): New functiom from the code of
	print_frame_args.
	(read_frame_arg): New function.
	(print_frame_args): Remove variable val.  New variable arg, call
	read_frame_arg and print_frame_arg with it.  Call xfree for arg.error.
2011-10-09 19:30:25 +00:00
Jan Kratochvil 111c64899c gdb/
Recognize virtual tail call frames.
	* Makefile.in (SFILES): Add dwarf2-frame-tailcall.c.
	(HFILES_NO_SRCDIR): Add dwarf2-frame-tailcall.h.
	(COMMON_OBS): Add dwarf2-frame-tailcall.o.
	* dwarf2-frame-tailcall.c: New file.
	* dwarf2-frame-tailcall.h: New file.
	* dwarf2-frame.c: Include dwarf2-frame-tailcall.h.
	(execute_cfa_program): New function comment.  Return INSN_PTR.  Reset
	REGS.PREV only after CIE execution.
	(struct dwarf2_frame_cache): New field tailcall_cache.
	(dwarf2_frame_cache): New variables entry_pc, entry_cfa_sp_offset,
	entry_cfa_sp_offset_p and instr.  Execute FDE instructions in two
	parts, try to find entry_cfa_sp_offset.  Call
	dwarf2_tailcall_sniffer_first.
	(dwarf2_frame_prev_register): Call dwarf2_tailcall_prev_register_first
	when appropriate.
	(dwarf2_frame_dealloc_cache): New function.
	(dwarf2_frame_sniffer): Preinitialize cache by dwarf2_frame_cache.
	(dwarf2_frame_unwind): Install dwarf2_frame_dealloc_cache.
	(dwarf2_signal_frame_unwind): Do not install dwarf2_frame_dealloc_cache.
	(dwarf2_append_unwinders): Add dwarf2_tailcall_frame_unwind.
	(dwarf2_frame_cfa): Support also dwarf2_tailcall_frame_unwind.
	* dwarf2loc.c (func_addr_to_tail_call_list)
	(tailcall_dump, call_sitep, VEC (call_sitep), chain_candidate)
	(call_site_find_chain_1, call_site_find_chain): New.
	* dwarf2loc.h (struct call_site_chain): New.
	(call_site_find_chain): New declaration.
	* frame.c (get_frame_address_in_block): Support also TAILCALL_FRAME.
	* frame.h (enum frame_type): New entry TAILCALL_FRAME.
	* python/py-frame.c (gdbpy_initialize_frames): Add TAILCALL_FRAME.
	* stack.c (frame_info): Support also TAILCALL_FRAME.

gdb/doc/
	Recognize virtual tail call frames.
	* gdb.texinfo (Optimized Code): Add reference to Tail Call Frames.
	(Tail Call Frames): New node.
	(Frames In Python): Add gdb.TAILCALL_FRAME.

gdb/testsuite/
	Recognize virtual tail call frames.
	* gdb.arch/amd64-entry-value.cc (c, a, b, amb_z, amb_y, amb_x, amb)
	(amb_b, amb_a): New.
	(main): Call a and b.
	* gdb.arch/amd64-entry-value.exp (tailcall: breakhere, tailcall: bt)
	(tailcall: p i, tailcall: p j, set $sp0=$sp, up, p $sp0 == $sp, frame 3)
	(p $sp0 + sizeof (void *) == $sp, ambiguous: breakhere, ambiguous: bt):
	New tests.
2011-10-09 19:26:44 +00:00
Pedro Alves 8fbca658f0 gdb/
* frame.c (frame_unwind_register): Throw an error if unwinding the
	register failed.
	* get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
	an unwind stop reason.
	(frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
	* frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
	UNWIND_UNAVAILABLE>: New.
	* inline-frame.c (inline_frame_unwind): Install
	default_frame_unwind_stop_reason.
	* frame-unwind.c: Include "exceptions.h".
	(frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
	(default_frame_unwind_stop_reason): New.
	* frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
	(default_frame_unwind_stop_reason): Declare.
	(struct frame_unwind) <stop_reason>: New function pointer.

	* dummy-frame.c: Install default_frame_unwind_stop_reason.
	* dwarf2-frame.c: Include exceptions.h.
	(struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
	(dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
	computing the CFA.  If such an error was thrown, set
	unavailable_retaddr.
	(dwarf2_frame_unwind_stop_reason): New.
	(dwarf2_frame_this_id): Don't build a frame id if the CFA was
	unavailable.
	(dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
	(dwarf2_signal_frame_unwind): Ditto.

	* amd64-tdep.c: Include "exceptions.h".
	(struct amd64_frame_cache): New field "base_p".
	(amd64_init_frame_cache): Clear it.
	(amd64_frame_cache_1): New, factored out from amd64_frame_cache.
	Avoid reading registers with functions that throw if the register
	is not necessary to compute the frame base.
	(amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
	swallowing NOT_AVAILABLE_ERROR.
	(amd64_frame_unwind_stop_reason): New.
	(amd64_frame_this_id): Don't build a frame id if the frame base
	was unavailable.
	(amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
	(amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(amd64_sigtramp_frame_unwind_stop_reason): New.
	(amd64_sigtramp_frame_this_id): Don't build a frame id if the
	frame base was unavailable.
	(amd64_sigtramp_frame_unwind): Install
	amd64_sigtramp_frame_unwind_stop_reason.
	(amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(amd64_epilogue_frame_unwind_stop_reason): New.
	(amd64_epilogue_frame_this_id): Don't build a frame id if the
	frame base was unavailable.
	(amd64_epilogue_frame_unwind): Install
	amd64_epilogue_frame_unwind_stop_reason.
	* i386-tdep.c: Include "exceptions.h".
	(struct i386_frame_cache): New field "base_p".
	(i386_init_frame_cache): Clear it.
	(i386_frame_cache_1): New, factored out from amd64_frame_cache.
	Avoid reading registers with functions that throw if the register
	is not necessary to compute the frame base.
	(i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
	swallowing NOT_AVAILABLE_ERROR.
	(i386_frame_unwind_stop_reason): New.
	(i386_frame_this_id): Don't build a frame id if the frame base was
	unavailable.
	(i386_frame_prev_register): Handle unavailable SP.
	(i386_frame_unwind): Install i386_frame_unwind_stop_reason.
	(i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(i386_epilogue_frame_unwind_stop_reason): New.
	(i386_epilogue_frame_this_id): Don't build a frame id if the frame
	base was unavailable.
	(i386_epilogue_frame_unwind): Install
	i386_epilogue_frame_unwind_stop_reason.
	(i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
	base_p if the frame base was computable.
	(i386_sigtramp_frame_unwind_stop_reason): New.
	(i386_sigtramp_frame_this_id): Don't build a frame id if the frame
	base was unavailable.
	(i386_sigtramp_frame_unwind): Install
	i386_sigtramp_frame_unwind_stop_reason.
	* sentinel-frame.c (sentinel_frame_prev_register): Use the value
	type's size, not the register's.
	(sentinel_frame_unwind): Install default_frame_unwind_stop_reason.

	* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
	default_frame_unwind_stop_reason.
	* alpha-tdep.c (alpha_sigtramp_frame_unwind)
	(alpha_heuristic_frame_unwind): Ditto.
	* amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
	* arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
	* avr-tdep.c (avr_frame_unwind): Ditto.
	* cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
	Ditto.
	* frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
	* frv-tdep.c (frv_frame_unwind): Ditto.
	* h8300-tdep.c (h8300_frame_unwind): Ditto.
	* hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
	* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
	* hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
	(hppa_stub_frame_unwind): Ditto.
	* i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
	* ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
	(ia64_libunwind_frame_unwind)
	(ia64_libunwind_sigtramp_frame_unwind): Ditto.
	* iq2000-tdep.c (iq2000_frame_unwind): Ditto.
	* lm32-tdep.c (lm32_frame_unwind): Ditto.
	* m32c-tdep.c (m32c_unwind): Ditto.
	* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
	* m32r-tdep.c (m32r_frame_unwind): Ditto.
	* m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
	* m68k-tdep.c (m68k_frame_unwind): Ditto.
	* m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
	* m88k-tdep.c (m88k_frame_unwind): Ditto.
	* mep-tdep.c (mep_frame_unwind): Ditto.
	* microblaze-tdep.c (microblaze_frame_unwind): Ditto.
	* mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
	(mips_stub_frame_unwind): Ditto.
	* mn10300-tdep.c (mn10300_frame_unwind): Ditto.
	* moxie-tdep.c (moxie_frame_unwind): Ditto.
	* mt-tdep.c (mt_frame_unwind): Ditto.
	* ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
	* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
	* rs6000-tdep.c (rs6000_frame_unwind): Ditto.
	* s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
	(s390_sigtramp_frame_unwind): Ditto.
	* score-tdep.c (score_prologue_unwind): Ditto.
	* sh-tdep.c (sh_frame_unwind): Ditto.
	* sh64-tdep.c (sh64_frame_unwind): Ditto.
	* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
	* sparc-tdep.c (sparc32_frame_unwind): Ditto.
	* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
	* sparc64-tdep.c (sparc64_frame_unwind): Ditto.
	* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
	* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
	* sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
	(sparc64obsd_trapframe_unwind): Ditto.
	* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
	* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
	* spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
	* v850-tdep.c (v850_frame_unwind): Ditto.
	* vax-tdep.c (vax_frame_unwind): Ditto.
	* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
	* xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
	* xtensa-tdep.c (xtensa_unwind): Ditto.
2011-03-18 18:52:32 +00:00
Pedro Alves 008f8f2ee9 gdb/
* frame.h (frame_unwind_caller_pc_if_available): Declare.
	* frame.c (frame_unwind_caller_pc_if_available): New.
	* stack.c (frame_info): Handle unavailable PC.
2011-03-18 18:45:30 +00:00
Pedro Alves e3eebbd742 gdb/
* frame.c (frame_unwind_pc): Rename to ...
	(frame_unwind_pc_if_available): ... this.  New `pc' output
	parameter.  Change return type to int.  Gracefully handle
	gdbarch_unwind_pc throwing NOT_AVAILABLE_ERROR.  Return 0 if that
	happened, or 1 otherwise.
	(frame_unwind_pc): Reimplement on top of
	frame_unwind_pc_if_available.
	(get_frame_func): Rename to ...
	(get_frame_func_if_available): New `pc' output parameter.  Change
	return type to int.  Gracefully handle the PC not being available.
	(get_frame_func): Reimplement on top of
	get_frame_func_if_available.
	(select_frame): Handle the PC being unavailable.
	(get_prev_frame): Handle the PC being unavailable.
	(get_frame_pc_if_available): New.
	(get_frame_address_in_block_if_available): New.
	(find_frame_sal): Handle the frame PC not being available.
	* frame.h (get_frame_pc_if_available): Declare.
	(get_frame_address_in_block_if_available): Declare.
	(get_frame_func_if_available): Declare.
	* stack.c (print_frame_info): Handle the PC being unavailable.
	(find_frame_funname): Ditto.
	(print_frame): Handle the PC being unavailable.
	(get_frame_language): Ditto.
	* blockframe.c (get_frame_block): Ditto.
	* macroscope.c (default_macro_scope): Ditto.
	* tui/tui-stack.c (tui_show_frame_info): Ditto.
2011-03-18 18:44:34 +00:00
Pedro Alves 8dccd430c9 gdb/
* dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
	returning that the register piece is unavailable/optimized out.
	(write_pieced_value): Handle get_frame_register_bytes returning
	that the register piece is unavailable/optimized out when doing a
	read-modify write of a bitfield.
	* findvar.c (value_from_register): Handle get_frame_register_bytes
	returning that the register piece is unavailable/optimized out.
	* frame.c (get_frame_register_bytes): New parameters `optimizedp'
	and `unavailablep'.  Throw error on bad debug info.  Use
	frame_register instead of frame_register_read, to fill in the new
	arguments.
	* frame.h (get_frame_register_bytes): New parameters `optimizedp'
	and `unavailablep'.
	* valops.c: (value_assign): Adjust, and handle
	get_frame_register_bytes failing.
	* spu-tdep.c: Include exceptions.h.
	(spu_software_single_step): Adjust, and handle
	get_frame_register_bytes failing.
	(spu_get_longjmp_target): Ditto.
	* gdbarch.sh (register_to_value): Change to return int.  New
	parameters `optimizedp' and `unavailablep'.
	* gdbarch.h, gdbarch.c: Regenerate.
	* i386-tdep.c (i386_register_to_value): Adjust to new
	gdbarch_register_to_value interface.
	* i387-tdep.c (i387_register_to_value): Ditto.
	* i387-tdep.h (i387_register_to_value): Ditto.
	* alpha-tdep.c (alpha_register_to_value): Ditto.
	* ia64-tdep.c (ia64_register_to_value): Ditto.
	* m68k-tdep.c (m68k_register_to_value): Ditto.
	* mips-tdep.c (mips_register_to_value): Ditto.
	* rs6000-tdep.c (rs6000_register_to_value): Ditto.
2011-03-18 18:42:41 +00:00
Pedro Alves 0fdb4f184b gdb/
* findvar.c (value_of_register): Mark the value as unavailable, if
	the register is unavailable.
	* frame.h (frame_register_unwind): New `unavailablep' parameter.
	(frame_register): New `unavailablep' parameter.
	(frame_register_read): Update comment.
	* frame.c (frame_register_unwind): New `unavailablep' parameter.
	Set it if the register is unavailable.  If the register is
	unavailable, clear the output buffer.
	(frame_register): New `unavailablep' parameter.  Pass it down.
	(frame_unwind_register): Adjust.
	(put_frame_register): Adjust.
	(frame_register_read): Adjust.  Also return false if the register
	is not available.
	(frame_register_unwind_location): Adjust.
	* sentinel-frame.c (sentinel_frame_prev_register): If the register
	is unavailable, mark the value accordingly.
	* stack.c (frame_info): Handle unavailable registers.

	gdb/testsuite/
	* gdb.trace/unavailable.exp (fpreg, spreg, pcreg): Define.
	(test_register, test_register_unavailable): New procedures.
	(gdb_unavailable_registers_test): New procedure.
	(gdb_trace_collection_test): Call it.
2011-03-18 18:41:36 +00:00
Tom Tromey eb8c062170 * thread.c (restore_selected_frame): Handle frame_level == -1.
(make_cleanup_restore_current_thread): Use
	get_selected_frame_if_set.
	* frame.h (get_selected_frame_if_set): Declare.
	* frame.c (get_selected_frame_if_set): New function.
2011-03-09 14:22:09 +00:00
Michael Snyder 766062f62f 2011-02-27 Michael Snyder <msnyder@vmware.com>
* darwin-nat-info.c: Fix comment typo.
	* dwarf2expr.h: Ditto.
	* fbsd-nat.c: Ditto.
	* fbsd-nat.h: Ditto.
	* frame-unwind.h: Ditto.
	* frame.h: Ditto.
	* hppa-hpux-tdep.c: Ditto.
	* i386-linux-nat.c: Ditto.
	* linux-nat.c: Ditto.
	* nbsd-nat.c: Ditto.
	* nbsd-nat.h: Ditto.
	* ppc-linux-tdep.c: Ditto.
	* serial.c: Ditto.
	* ui-file.h: Ditto.
	* tui/tui-winsource.c: Ditto.
2011-02-27 16:25:38 +00:00
Michael Snyder b021a22166 2011-02-25 Michael Snyder <msnyder@vmware.com>
* arm-tdep.c: Fix typos in comments.
	* bsd-uthread.c: Ditto.
	* completer.c: Ditto.
	* corelow.c: Ditto.
	* cp-namespace.c: Ditto.
	* cp-support.c: Ditto.
	* cris-tdep.c: Ditto.
	* dbxread.c: Ditto.
	* dwarf2read.c: Ditto.
	* frame.h: Ditto.
	* gdbtypes.h: Ditto.
	* inferior.h: Ditto.
	* mdebugread.c: Ditto.
	* mips-tdep.c: Ditto.
	* ppc-linux-nat.c: Ditto.
	* ppc-linux-tdep.c: Ditto.
	* printcmd.c: Ditto.
	* sol-thread.c: Ditto.
	* solib-frv.c: Ditto.
	* solist.h: Ditto.
	* sparc64-tdep.c: Ditto.
	* spu-tdep.c: Ditto.
	* stabsread.c: Ditto.
	* symfile.c: Ditto.
	* valops.c: Ditto.
	* varobj.c: Ditto.
	* vax-nat.c: Ditto.
	* python/py-block.c: Ditto.
	* python/py-symbol.c: Ditto.
	* python/py-symtab.c: Ditto.
	* python/py-value.c: Ditto.
	* tui/tui-win.c: Ditto.
2011-02-26 02:07:10 +00:00
Michael Snyder 0963b4bd45 2011-01-07 Michael Snyder <msnyder@vmware.com>
* ada-lang.c: Comment cleanup, mostly periods and spaces.
	* ada-lang.h: Ditto.
	* ada-tasks.c: Ditto.
	* ada-valprint.c: Ditto.
	* aix-threads.c: Ditto.
	* alpha-linux-nat.c: Ditto.
	* alpha-linux-tdep.c: Ditto.
	* alpha-mdebug-tdep.c: Ditto.
	* alpha-nat.c: Ditto.
	* alpha-osf1-tdep.c: Ditto.
	* alpha-tdep.c: Ditto.
	* alphabsd-nat.c: Ditto.
	* alphabsd-tdep.c: Ditto.
	* amd64-darwin-tdep.c: Ditto.
	* amd64-linux-nat.c: Ditto.
	* amd64-linux-tdep.c: Ditto.
	* amd64-sol2-tdep.c: Ditto.
	* amd64-tdep.c: Ditto.
	* amd64-fbsd-tdep.c: Ditto.
	* amd64-nbsd-tdep.c: Ditto.
	* amd64-obsd-tdep.c: Ditto.
	* amd64-linux-nat.c: Ditto.
	* amd64-linux-tdep.c: Ditto.
	* arm-tdep.c: Ditto.
	* arm-tdep.h: Ditto.
	* armnbsd-nat.c: Ditto.
	* avr-tdep.c: Ditto.
	* bfin-tdep.c: Ditto.
	* bsd-kvm.c: Ditto.
	* c-typeprintc: Ditto.
	* c-valprint.c: Ditto.
	* coff-pe-read.h: Ditto.
	* coffreead.c: Ditto.
	* cris-tdep.c: Ditto.
	* d-lang.c: Ditto.
	* darwin-nat-info.c: Ditto.
	* darwin-nat.c: Ditto.
	* dbug-rom.c: Ditto.
	* dbxread.c: Ditto.
	* dcache.c: Ditto.
	* dcache.h: Ditto.
	* dec-thread.c: Ditto.
	* defs.h: Ditto.
	* demangle.c: Ditto.
	* dicos-tdep.c: Ditto.
	* dictionary.c: Ditto.
	* dictionary.h: Ditto.
	* dink32-rom.c: Ditto.
	* disasm.c: Ditto.
	* doublest.c: Ditto.
	* dsrec.c: Ditto.
	* dummy-frame.c: Ditto.
	* dwarf2-frame.c: Ditto.
	* dwarf2expr.c: Ditto.
	* dwarf2loc.c: Ditto.
	* dwarf2read.c: Ditto.
	* elfread.c: Ditto.
	* environ.c: Ditto.
	* eval.c: Ditto.
	* event-top.h: Ditto.
	* exceptions.c: Ditto.
	* exceptions.h: Ditto.
	* exec.c: Ditto.
	* expprint.c: Ditto.
	* expression.h: Ditto.
	* f-exp.y: Ditto.
	* f-lang.c: Ditto.
	* f-lang.h: Ditto.
	* f-typeprint.c: Ditto.
	* f-valprint.c: Ditto.
	* fbsd-nat.c: Ditto.
	* findvar.c: Ditto.
	* fork-child.c: Ditto.
	* frame.c: Ditto.
	* frame.h: Ditto.
	* frv-linux-tdep.c: Ditto.
	* frv-tdep.c: Ditto.
	* gcore.c: Ditto.
	* gdb-stabs.h: Ditto.
	* gdb_assert.h: Ditto.
	* gdb_string.h: Ditto.
	* gdb_thread_db.h: Ditto.
	* gdb_wait.h: Ditto.
	* gdbarch.sh: Ditto.
	* gdbcore.h: Ditto.
	* gdbthread.h: Ditto.
	* gdbtypes.c: Ditto.
	* gdbtypes.h: Ditto.
	* gnu-nat.c: Ditto.
	* gnu-nat.h: Ditto.
	* gnu-v2-abi.c: Ditto.
	* gnu-v3-abi.c: Ditto.
	* go32-nat.c: Ditto.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.
2011-01-07 19:36:19 +00:00
Tom Tromey ccfc3d6e06 gdb
* frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
	* python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
	and ARCH_FRAME.
gdb/doc
	PR python/12133:
	* gdb.texinfo (Frames In Python): Document various frame
	constants.
2011-01-06 18:34:16 +00:00
Michael Snyder 3e43a32aaa 2011-01-05 Michael Snyder <msnyder@vmware.com>
* addrmap.c: Shorten lines of >= 80 columns.
	* arch-utils.c: Ditto.
	* arch-utils.h: Ditto.
	* ax-gdb.c: Ditto.
	* ax-general.c: Ditto.
	* bcache.c: Ditto.
	* blockframe.c: Ditto.
	* breakpoint.c: Ditto.
	* buildsym.c: Ditto.
	* c-lang.c: Ditto.
	* c-typeprint.c: Ditto.
	* charset.c: Ditto.
	* coffread.c: Ditto.
	* command.h: Ditto.
	* corelow.c: Ditto.
	* cp-abi.c: Ditto.
	* cp-namespace.c: Ditto.
	* cp-support.c: Ditto.
	* dbug-rom.c: Ditto.
	* dbxread.c: Ditto.
	* defs.h: Ditto.
	* dfp.c: Ditto.
	* dfp.h: Ditto.
	* dictionary.c: Ditto.
	* disasm.c: Ditto.
	* doublest.c: Ditto.
	* dwarf2-frame.c: Ditto.
	* dwarf2expr.c: Ditto.
	* dwarf2loc.c: Ditto.
	* dwarf2read.c: Ditto.
	* elfread.c: Ditto.
	* eval.c: Ditto.
	* event-loop.c: Ditto.
	* event-loop.h: Ditto.
	* exceptions.h: Ditto.
	* exec.c: Ditto.
	* expprint.c: Ditto.
	* expression.h: Ditto.
	* f-lang.c: Ditto.
	* f-valprint.c: Ditto.
	* findcmd.c: Ditto.
	* frame-base.c: Ditto.
	* frame-unwind.c: Ditto.
	* frame-unwind.h: Ditto.
	* frame.c: Ditto.
	* frame.h: Ditto.
	* gcore.c: Ditto.
	* gdb-stabs.h: Ditto.
	* gdb_assert.h: Ditto.
	* gdb_dirent.h: Ditto.
	* gdb_obstack.h: Ditto.
	* gdbcore.h: Ditto.
	* gdbtypes.c: Ditto.
	* gdbtypes.h: Ditto.
	* inf-ttrace.c: Ditto.
	* infcall.c: Ditto.
	* infcmd.c: Ditto.
	* inflow.c: Ditto.
	* infrun.c: Ditto.
	* inline-frame.h: Ditto.
	* language.c: Ditto.
	* language.h: Ditto.
	* libunwind-frame.c: Ditto.
	* libunwind-frame.h: Ditto.
	* linespec.c: Ditto.
	* linux-nat.c: Ditto.
	* linux-nat.h: Ditto.
	* linux-thread-db.c: Ditto.
	* machoread.c: Ditto.
	* macroexp.c: Ditto.
	* macrotab.c: Ditto.
	* main.c: Ditto.
	* maint.c: Ditto.
	* mdebugread.c: Ditto.
	* memattr.c: Ditto.
	* minsyms.c: Ditto.
	* monitor.c: Ditto.
	* monitor.h: Ditto.
	* objfiles.c: Ditto.
	* objfiles.h: Ditto.
	* osabi.c: Ditto.
	* p-typeprint.c: Ditto.
	* p-valprint.c: Ditto.
	* parse.c: Ditto.
	* printcmd.c: Ditto.
	* proc-events.c: Ditto.
	* procfs.c: Ditto.
	* progspace.c: Ditto.
	* progspace.h: Ditto.
	* psympriv.h: Ditto.
	* psymtab.c: Ditto.
	* record.c: Ditto.
	* regcache.c: Ditto.
	* regcache.h: Ditto.
	* remote-fileio.c: Ditto.
	* remote.c: Ditto.
	* ser-mingw.c: Ditto.
	* ser-tcp.c: Ditto.
	* ser-unix.c: Ditto.
	* serial.c: Ditto.
	* serial.h: Ditto.
	* solib-frv.c: Ditto.
	* solib-irix.c: Ditto.
	* solib-osf.c: Ditto.
	* solib-pa64.c: Ditto.
	* solib-som.c: Ditto.
	* solib-sunos.c: Ditto.
	* solib-svr4.c: Ditto.
	* solib-target.c: Ditto.
	* solib.c: Ditto.
	* somread.c: Ditto.
	* source.c: Ditto.
	* stabsread.c: Ditto.
	* stabsread.c: Ditto.
	* stack.c: Ditto.
	* stack.h: Ditto.
	* symfile-mem.c: Ditto.
	* symfile.c: Ditto.
	* symfile.h: Ditto.
	* symmisc.c: Ditto.
	* symtab.c: Ditto.
	* symtab.h: Ditto.
	* target-descriptions.c: Ditto.
	* target-memory.c: Ditto.
	* target.c: Ditto.
	* target.h: Ditto.
	* terminal.h: Ditto.
	* thread.c: Ditto.
	* top.c: Ditto.
	* tracepoint.c: Ditto.
	* tracepoint.h: Ditto.
	* ui-file.c: Ditto.
	* ui-file.h: Ditto.
	* ui-out.h: Ditto.
	* user-regs.c: Ditto.
	* user-regs.h: Ditto.
	* utils.c: Ditto.
	* valarith.c: Ditto.
	* valops.c: Ditto.
	* valprint.c: Ditto.
	* valprint.h: Ditto.
	* value.c: Ditto.
	* varobj.c: Ditto.
	* varobj.h: Ditto.
	* vec.h: Ditto.
	* xcoffread.c: Ditto.
	* xcoffsolib.c: Ditto.
	* xcoffsolib.h: Ditto.
	* xml-syscall.c: Ditto.
	* xml-tdesc.c: Ditto.
2011-01-05 22:22:53 +00:00
Joel Brobecker 7b6bb8daac run copyright.sh for 2011. 2011-01-01 15:34:07 +00:00
Joel Brobecker 4c38e0a4fc Update copyright year in most headers.
Automatic update by copyright.sh.
2010-01-01 07:32:07 +00:00
Pedro Alves 6c95b8df7f 2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs	<stan@codesourcery.com>

	Add base multi-executable/process support to GDB.

	gdb/
	* Makefile.in (SFILES): Add progspace.c.
	(COMMON_OBS): Add progspace.o.
	* progspace.h: New.
	* progspace.c: New.

	* breakpoint.h (struct bp_target_info) <placed_address_space>: New
	field.
	(struct bp_location) <pspace>: New field.
	(struct breakpoint) <pspace>: New field.
	(bpstat_stop_status, breakpoint_here_p)
	(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
	(regular_breakpoint_inserted_here_p)
	(software_breakpoint_inserted_here_p, breakpoint_thread_match)
	(set_default_breakpoint): Adjust prototypes.
	(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
	(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
	Adjust prototypes.
	* breakpoint.c (executing_startup): Delete.
	(default_breakpoint_sspace): New.
	(breakpoint_restore_shadows): Skip if the address space doesn't
	match.
	(update_watchpoint): Record the frame's program space in the
	breakpoint location.
	(insert_bp_location): Record the address space in target_info.
	Adjust to pass the symbol space to solib_name_from_address.
	(breakpoint_program_space_exit): New.
	(insert_breakpoint_locations): Switch the symbol space and thread
	when inserting breakpoints.  Don't insert breakpoints in a vfork
	parent waiting for vfork done if we're not attached to the vfork
	child.
	(remove_breakpoints_pid): New.
	(reattach_breakpoints): Switch to a thread of PID.  Ignore
	breakpoints of other symbol spaces.
	(create_internal_breakpoint): Store the symbol space in the sal.
	(create_longjmp_master_breakpoint): Iterate over all symbol
	spaces.
	(update_breakpoints_after_exec): Ignore breakpoints for other
	symbol spaces.
	(remove_breakpoint): Rename to ...
	(remove_breakpoint_1): ... this.  Pass the breakpoints symbol
	space to solib_name_from_address.
	(remove_breakpoint): New.
	(mark_breakpoints_out): Ignore breakpoints from other symbol
	spaces.
	(breakpoint_init_inferior): Ditto.
	(breakpoint_here_p): Add an address space argument and adjust to
	use breakpoint_address_match.
	(moribund_breakpoint_here_p): Ditto.
	(regular_breakpoint_inserted_here_p): Ditto.
	(breakpoint_inserted_here_p): Ditto.
	(software_breakpoint_inserted_here_p): Ditto.
	(breakpoint_thread_match): Ditto.
	(bpstat_check_location): Ditto.
	(bpstat_stop_status): Ditto.
	(print_breakpoint_location): If there's a location to print,
	switch the current symbol space.
	(print_one_breakpoint_location): Add `allflag' argument.
	(print_one_breakpoint): Ditto.	Adjust.
	(do_captured_breakpoint_query): Adjust.
	(breakpoint_1): Adjust.
	(breakpoint_has_pc): Also match the symbol space.
	(describe_other_breakpoints): Add a symbol space argument and
	adjust.
	(set_default_breakpoint): Add a symbol space argument.	Set
	default_breakpoint_sspace.
	(breakpoint_address_match): New.
	(check_duplicates_for): Add an address space argument, and adjust.
	(set_raw_breakpoint): Record the symbol space in the location and
	in the breakpoint.
	(set_longjmp_breakpoint): Skip longjmp master breakpoints from
	other symbol spaces.
	(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
	(disable_breakpoints_in_shlibs): Skip breakpoints from other
	symbol spaces.
	(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
	(create_catchpoint): Set the symbol space in the sal.
	(disable_breakpoints_before_startup): Skip breakpoints from other
	symbol spaces.	Set executing_startup in the current symbol space.
	(enable_breakpoints_after_startup): Clear executing_startup in the
	current symbol space.  Skip breakpoints from other symbol spaces.
	(clone_momentary_breakpoint): Also copy the symbol space.
	(add_location_to_breakpoint): Set the location's symbol space.
	(bp_loc_is_permanent): Switch thread and symbol space.
	(create_breakpoint): Adjust.
	(expand_line_sal_maybe): Expand comment to mention symbol spaces.
	Switch thread and symbol space when reading memory.
	(parse_breakpoint_sals): Set the symbol space in the sal.
	(break_command_really): Ditto.
	(skip_prologue_sal): Switch and space.
	(resolve_sal_pc): Ditto.
	(watch_command_1): Record the symbol space in the sal.
	(create_ada_exception_breakpoint): Adjust.
	(clear_command): Adjust.  Match symbol spaces.
	(update_global_location_list): Use breakpoint_address_match.
	(breakpoint_re_set_one): Switch thread and space.
	(breakpoint_re_set): Save symbol space.
	(breakpoint_re_set_thread): Also reset the symbol space.
	(deprecated_insert_raw_breakpoint): Add an address space argument.
	Adjust.
	(insert_single_step_breakpoint): Ditto.
	(single_step_breakpoint_inserted_here_p): Ditto.
	(clear_syscall_counts): New.
	(_initialize_breakpoint): Install it as inferior_exit observer.

	* exec.h: Include "progspace.h".
	(exec_bfd, exec_bfd_mtime): New defines.
	(exec_close): Declare.
	* exec.c: Include "gdbthread.h" and "progspace.h".
	(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
	(using_exec_ops): New.
	(exec_close_1): Rename to exec_close, and make public.
	(exec_close): Rename to exec_close_1, and adjust all callers.  Add
	description.  Remove target sections and close executables from
	all program spaces.
	(exec_file_attach): Add comment.
	(add_target_sections): Check on `using_exec_ops' to check if the
	target should be pushed.
	(remove_target_sections): Only unpush the target if there are no
	more target sections in any symbol space.
	* gdbcore.h: Include "exec.h".
	(exec_bfd, exec_bfd_mtime): Remove declarations.

	* frame.h (get_frame_program_space, get_frame_address_space)
	(frame_unwind_program_space): Declare.
	* frame.c (struct frame_info) <pspace, aspace>: New fields.
	(create_sentinel_frame): Add program space argument.  Set the
	pspace and aspace fields of the frame object.
	(get_current_frame, create_new_frame): Adjust.
	(get_frame_program_space): New.
	(frame_unwind_program_space): New.
	(get_frame_address_space): New.
	* stack.c (print_frame_info): Adjust.
	(print_frame): Use the frame's program space.

	* gdbthread.h (any_live_thread_of_process): Declare.
	* thread.c (any_live_thread_of_process): New.
	(switch_to_thread): Switch the program space as well.
	(restore_selected_frame): Don't warn if trying to restore frame
	level 0.

	* inferior.h: Include "progspace.h".
	(detach_fork): Declare.
	(struct inferior) <removable, aspace, pspace>
	<vfork_parent, vfork_child, pending_detach>
	<waiting_for_vfork_done>: New fields.
	<terminal_info>: Remove field.
	<data, num_data>: New fields.
	(register_inferior_data, register_inferior_data_with_cleanup)
	(clear_inferior_data, set_inferior_data, inferior_data): Declare.
	(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
	(inferior_appeared): Declare.
	(find_inferior_pid): Typo.
	(find_inferior_id, find_inferior_for_program_space): Declare.
	(set_current_inferior, save_current_inferior, prune_inferiors)
	(number_of_inferiors): Declare.
	(inferior_list): Declare.
	* inferior.c: Include "gdbcore.h" and "symfile.h".
	(inferior_list): Make public.
	(delete_inferior_1): Always delete thread silently.
	(find_inferior_id): Make public.
	(current_inferior_): New.
	(current_inferior): Use it.
	(set_current_inferior): New.
	(restore_inferior): New.
	(save_current_inferior): New.
	(free_inferior): Free the per-inferior data.
	(add_inferior_silent): Allocate per-inferior data.
	Call inferior_appeared.
	(delete_threads_of_inferior): New.
	(delete_inferior_1): Adjust interface to take an inferior pointer.
	(delete_inferior): Adjust.
	(delete_inferior_silent): Adjust.
	(exit_inferior_1): New.
	(exit_inferior): New.
	(exit_inferior_silent): New.
	(exit_inferior_num_silent): New.
	(detach_inferior): Adjust.
	(inferior_appeared): New.
	(discard_all_inferiors): Adjust.
	(find_inferior_id): Make public.  Assert pid is not zero.
	(find_inferior_for_program_space): New.
	(have_inferiors): Check if we have any inferior with pid not zero.
	(have_live_inferiors): Go over all pushed targets looking for
	process_stratum.
	(prune_inferiors): New.
	(number_of_inferiors): New.
	(print_inferior): Add executable column.  Print vfork parent/child
	relationships.
	(inferior_command): Adjust to cope with not running inferiors.
	(remove_inferior_command): New.
	(add_inferior_command): New.
	(clone_inferior_command): New.
	(struct inferior_data): New.
	(struct inferior_data_registration): New.
	(struct inferior_data_registry): New.
	(inferior_data_registry): New.
	(register_inferior_data_with_cleanup): New.
	(register_inferior_data): New.
	(inferior_alloc_data): New.
	(inferior_free_data): New.
	(clear_inferior_data): New.
	(set_inferior_data): New.
	(inferior_data): New.
	(initialize_inferiors): New.
	(_initialize_inferiors): Register "add-inferior",
	"remove-inferior" and "clone-inferior" commands.

	* objfiles.h: Include "progspace.h".
	(struct objfile) <pspace>: New field.
	(symfile_objfile, object_files): Don't declare.
	(ALL_PSPACE_OBJFILES): New.
	(ALL_PSPACE_OBJFILES_SAFE): New.
	(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
	(ALL_PSPACE_SYMTABS): New.
	(ALL_PRIMARY_SYMTABS): Adjust.
	(ALL_PSPACE_PRIMARY_SYMTABS): New.
	(ALL_PSYMTABS): Adjust.
	(ALL_PSPACE_PSYMTABS): New.
	* objfiles.c (object_files, symfile_objfile): Delete.
	(struct objfile_sspace_info): New.
	(objfiles_pspace_data): New.
	(objfiles_pspace_data_cleanup): New.
	(get_objfile_pspace_data): New.
	(objfiles_changed_p): Delete.
	(allocate_objfile): Set the objfile's program space.  Adjust to
	reference objfiles_changed_p in pspace data.
	(free_objfile): Adjust to reference objfiles_changed_p in pspace
	data.
	(objfile_relocate): Ditto.
	(update_section_map): Add pspace argument.  Adjust to iterate over
	objfiles in the passed in pspace.
	(find_pc_section): Delete sections and num_sections statics.
	Adjust to refer to program space's objfiles_changed_p.	Adjust to
	refer to sections and num_sections store in the objfile's pspace
	data.
	(objfiles_changed): Adjust to reference objfiles_changed_p in
	pspace data.
	(_initialize_objfiles): New.
	* linespec.c (decode_all_digits, decode_dollar): Set the sal's
	program space.
	* source.c (current_source_pspace): New.
	(get_current_source_symtab_and_line): Set the sal's program space.
	(set_current_source_symtab_and_line): Set current_source_pspace.
	(select_source_symtab): Ditto.	Use ALL_OBJFILES.
	(forget_cached_source_info): Iterate over all program spaces.
	* symfile.c (clear_symtab_users): Adjust.
	* symmisc.c (print_symbol_bcache_statistics): Iterate over all
	program spaces.
	(print_objfile_statistics): Ditto.
	(maintenance_print_msymbols): Ditto.
	(maintenance_print_objfiles): Ditto.
	(maintenance_info_symtabs): Ditto.
	(maintenance_info_psymtabs): Ditto.
	* symtab.h (SYMTAB_PSPACE): New.
	(struct symtab_and_line) <pspace>: New field.
	* symtab.c (init_sal): Clear the sal's program space.
	(find_pc_sect_symtab): Set the sal's program space.  Switch thread
	and space.
	(append_expanded_sal): Add program space argument.  Iterate over
	all program spaces.
	(expand_line_sal): Iterate over all program spaces.  Switch
	program space.

	* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
	(struct target_ops) <to_thread_address_space>: New field.
	(target_thread_address_space): Define.
	* target.c (target_detach): Only remove breakpoints from the
	inferior we're detaching.
	(target_thread_address_space): New.

	* defs.h (initialize_progspace): Declare.
	* top.c (gdb_init): Call it.

	* solist.h (struct so_list) <sspace>: New field.
	* solib.h (struct program_space): Forward declare.
	(solib_name_from_address): Adjust prototype.
	* solib.c (so_list_head): Replace with a macro referencing the
	program space.
	(update_solib_list): Set the so's program space.
	(solib_name_from_address): Add a program space argument and adjust.

	* solib-svr4.c (struct svr4_info) <pid>: Delete field.
	<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
	<interp_plt_sect_high>: New fields.
	(svr4_info_p, svr4_info): Delete.
	(solib_svr4_sspace_data): New.
	(get_svr4_info): Rewrite.
	(svr4_sspace_data_cleanup): New.
	(open_symbol_file_object): Adjust.
	(svr4_default_sos): Adjust.
	(svr4_fetch_objfile_link_map): Adjust.
	(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
	(interp_plt_sect_high): Delete.
	(svr4_in_dynsym_resolve_code): Adjust.
	(enable_break): Adjust.
	(svr4_clear_solib): Revert bit that removed the svr4_info here,
	and reinstate clearing debug_base, debug_loader_offset_p,
	debug_loader_offset and debug_loader_name.
	(_initialize_svr4_solib): Register solib_svr4_pspace_data.  Don't
	install an inferior_exit observer anymore.

	* printcmd.c (struct display) <pspace>: New field.
	(display_command): Set the display's sspace.
	(do_one_display): Match the display's sspace.
	(display_uses_solib_p): Ditto.

	* linux-fork.c (detach_fork): Moved to infrun.c.
	(_initialize_linux_fork): Moved "detach-on-fork" command to
	infrun.c.
	* infrun.c (detach_fork): Moved from linux-fork.c.
	(proceed_after_vfork_done): New.
	(handle_vfork_child_exec_or_exit): New.
	(follow_exec_mode_replace, follow_exec_mode_keep)
	(follow_exec_mode_names, follow_exec_mode_string)
	(show_follow_exec_mode_string): New.
	(follow_exec): New.  Reinstate the mark_breakpoints_out call.
	Remove shared libraries before attaching new executable.  If user
	wants to keep the inferior, keep it.
	(displaced_step_fixup): Adjust to pass an address space to the
	breakpoints module.
	(resume): Ditto.
	(clear_proceed_status): In all-stop mode, always clear the proceed
	status of all threads.
	(prepare_to_proceed): Adjust to pass an address space to the
	breakpoints module.
	(proceed): Ditto.
	(adjust_pc_after_break): Ditto.
	(handle_inferior_event): When handling a process exit, switch the
	program space to the inferior's that had exited.  Call
	handle_vfork_child_exec_or_exit.  Adjust to pass an address space
	to the breakpoints module.  In non-stop mode, when following a
	fork and detach-fork is off, also resume the other branch.  Handle
	TARGET_WAITKIND_VFORK_DONE.  Set the program space in sals.
	(normal_stop): Prune inferiors.
	(_initialize_infrun): Install the new "follow-exec-mode" command.
	"detach-on-fork" moved here.

	* regcache.h (get_regcache_aspace): Declare.
	* regcache.c (struct regcache) <aspace>: New field.
	(regcache_xmalloc): Clear the aspace.
	(get_regcache_aspace): New.
	(regcache_cpy): Copy the aspace field.
	(regcache_cpy_no_passthrough): Ditto.
	(get_thread_regcache): Fetch the thread's address space from the
	target, and store it in the regcache.

	* infcall.c (call_function_by_hand): Set the sal's pspace.

	* arch-utils.c (default_has_shared_address_space): New.
	* arch-utils.h (default_has_shared_address_space): Declare.

	* gdbarch.sh (has_shared_address_space): New.
	* gdbarch.h, gdbarch.c: Regenerate.

	* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
	(linux_has_shared_address_space): New.
	(_initialize_linux_tdep): Declare.

	* arm-tdep.c (arm_software_single_step): Pass the frame's address
	space to insert_single_step_breakpoint.
	* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
	frame's pspace to breakpoint functions.
	* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
	(cris_software_single_step): Ditto.
	* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
	Pass the frame's pspace to breakpoint functions.
	(mips_software_single_step): Adjust.
	(mips_single_step_through_delay): Adjust.
	* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
	* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
	* solib-irix.c (enable_break): Adjust to pass the current frame's
	address space to breakpoint functions.
	* sparc-tdep.c (sparc_software_single_step): Ditto.
	* spu-tdep.c (spu_software_single_step): Ditto.
	* alpha-tdep.c (alpha_software_single_step): Ditto.
	* record.c (record_wait): Adjust to pass an address space to the
	breakpoints module.

	* fork-child.c (fork_inferior): Set the new inferior's program and
	address spaces.
	* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
	and address spaces.
	(inf_ptrace_attach): Set the inferior's program and address spaces.
	* linux-nat.c: Include "solib.h".
	(linux_child_follow_fork): Manage parent and child's program and
	address spaces.	 Clone the parent's program space if necessary.
	Don't wait for the vfork to be done here.  Refuse to resume if
	following the vfork parent while leaving the child stopped.
	(resume_callback): Don't resume a vfork parent.
	(linux_nat_resume): Also check for pending events in the
	lp->waitstatus field.
	(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
	events to the core.
	(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
	(cancel_breakpoint): Adjust.
	* linux-thread-db.c (thread_db_wait): Don't remove thread event
	breakpoints here.
	(thread_db_mourn_inferior): Don't mark breakpoints out here.
	Remove thread event breakpoints after mourning.
	* corelow.c: Include progspace.h.
	(core_open): Set the inferior's program and address spaces.
	* remote.c (remote_add_inferior): Set the new inferior's program
	and address spaces.
	(remote_start_remote): Update address spaces.
	(extended_remote_create_inferior_1): Don't init the thread list if
	we already debugging other inferiors.
	* darwin-nat.c (darwin_attach): Set the new inferior's program and
	address spaces.
	* gnu-nat.c (gnu_attach): Ditto.
	* go32-nat.c (go32_create_inferior): Ditto.
	* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
	* monitor.c (monitor_open): Ditto.
	* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
	* procfs.c (do_attach): Ditto.
	* windows-nat.c (do_initial_windows_stuff): Ditto.

	* inflow.c (inferior_process_group)
	(terminal_init_inferior_with_pgrp, terminal_inferior,
	(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
	(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
	to use per-inferior data instead of inferior->terminal_info.
	(inflow_inferior_data): New.
	(inflow_new_inferior): Delete.
	(inflow_inferior_data_cleanup): New.
	(get_inflow_inferior_data): New.

	* mi/mi-interp.c (mi_new_inferior): Rename to...
	(mi_inferior_appeared): ... this.
	(mi_interpreter_init): Adjust.

	* tui/tui-disasm.c: Include "progspace.h".
	(tui_set_disassem_content): Pass an address space to
	breakpoint_here_p.

	* NEWS: Mention multi-program debugging support.  Mention new
	commands "add-inferior", "clone-inferior", "remove-inferior",
	"maint info program-spaces", and new option "set
	follow-exec-mode".

2009-10-19  Pedro Alves	 <pedro@codesourcery.com>
	    Stan Shebs	<stan@codesourcery.com>

	gdb/doc/
	* observer.texi (new_inferior): Rename to...
	(inferior_appeared): ... this.

2009-10-19  Pedro Alves	 <pedro@codesourcery.com>
	    Stan Shebs	<stan@codesourcery.com>

	gdb/testsuite/
	* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
	* gdb.base/foll-exec.exp: Adjust to expect a process id before
	"Executing new program".
	* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
	* gdb.base/multi-forks.exp: Ditto.  Adjust to the inferior being
	left listed after having been killed.
	* gdb.base/attach.exp: Adjust to spell out "symbol-file".
	* gdb.base/maint.exp: Adjust test.

	* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
	* gdb.multi/Makefile.in: New.
	* gdb.multi/base.exp: New.
	* gdb.multi/goodbye.c: New.
	* gdb.multi/hangout.c: New.
	* gdb.multi/hello.c: New.
	* gdb.multi/bkpt-multi-exec.c: New.
	* gdb.multi/bkpt-multi-exec.exp: New.
	* gdb.multi/crashme.c: New.

2009-10-19  Pedro Alves	 <pedro@codesourcery.com>
	    Stan Shebs	<stan@codesourcery.com>

	gdb/doc/
	* gdb.texinfo (Inferiors): Rename node to ...
	(Inferiors and Programs): ... this.  Mention running multiple
	programs in the same debug session.
	<info inferiors>: Mention the new 'Executable' column if "info
	inferiors".  Update examples.  Document the "add-inferior",
	"clone-inferior", "remove-inferior" and "maint info
	program-spaces" commands.
	(Process): Rename node to...
	(Forks): ... this.  Document "set|show follow-exec-mode".
2009-10-19 09:51:43 +00:00
Joel Brobecker 005ca36a8b gdb/
* frame.c (get_frame_id): Default to outer_frame_id if the this_id
        method does not supply an ID.  Assert that the result is not
        null_frame_id.
        (outer_frame_id): New.
        (frame_id_p): Accept outer_frame_id.
        (frame_id_eq): Allow outer_frame_id to be equal to itself.
        (frame_find_by_id): Revert previous local workarounds.
        (get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
        * frame.h (null_frame_id, frame_id_p): Update comments.
        (outer_frame_id): Declare.
        * infrun.c (handle_inferior_event): Do not treat all steps from the
        outermost frame as subroutine calls.

        * libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
        * hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
        * ia64-tdep.c (ia64_frame_this_id): Likewise.
        (ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
        Use outer_frame_id instead of null_frame_id.
        * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
        * i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
        * inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
        * thread.c (restore_selected_frame): Update comment and remove
        frame_id_p check.

        gdb/doc/
        * gdbint.texinfo (Unwinding the Frame ID): Reference outer_frame_id.
2009-09-13 16:28:29 +00:00
Tom Tromey e78022079c gdb
* frame.h (frame_unwinder_is): Declare.
	* frame.c (frame_unwinder_is): New function.
	* dwarf2loc.c: Include dwarf2-frame.h.
	(dwarf_expr_frame_cfa): New function.
	(dwarf2_evaluate_loc_desc): Use it.
	(needs_frame_frame_cfa): New function.
	(dwarf2_loc_desc_needs_frame): Use it.
	* dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
	field.
	* dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
	case.
	* dwarf2-frame.h (dwarf2_frame_cfa): Declare.
	* dwarf2-frame.c (no_get_frame_cfa): New function.
	(execute_stack_op): Use it.
	(dwarf2_frame_cfa): New function.
gdb/testsuite
	* gdb.dwarf2/callframecfa.exp: New file.
	* gdb.dwarf2/callframecfa.S: New file.
2009-09-02 14:53:57 +00:00
Ulrich Weigand 36f15f554f * frame.h (frame_unwind_arch): New.
(frame_unwind_caller_arch): Likewise.
	* frame-unwind.h (frame_prev_arch_ftype): New type.
	(struct frame_unwind): New member prev_arch.
	* frame.c (struct frame_info): New member prev_arch.
	(frame_unwind_arch): New function.
	(frame_unwind_caller_arch): Likewise..
	(get_frame_arch): Reimplement in terms of frame_unwind_arch.
	* sentinel-frame.c (sentinel_frame_prev_arch): New function.
	(sentinel_frame_unwinder): Install it.

	* frame.c (frame_pc_unwind): Use frame_unwind_arch instead
	of get_frame_arch.
	(frame_unwind_register_value): Likewise.
	(frame_unwind_register_signed): Likewise.
	(frame_unwind_register_unsigned): Likewise.
	* frame-unwind.c (frame_unwind_got_optimized): Likewise.
	(frame_unwind_got_register): Likewise.
	(frame_unwind_got_constant): Likewise.
	(frame_unwind_got_bytes): Likewise.
	(frame_unwind_got_address): Likewise.

	* frame.h (enum frame_type): New value ARCH_FRAME.
	* frame.c (fprint_frame_type): Handle ARCH_FRAME.
	* stack.c (print_frame_info): Likewise.
2009-07-02 17:09:28 +00:00
Daniel Jacobowitz edb3359dff gdb/
* NEWS: Document inlined function support.
	* Makefile.in (SFILES): Add inline-frame.c.
	(COMMON_OBS): Add inline-frame.o.
	* block.c (contained_in): Rewrite to use lexical nesting.
	(block_linkage_function): Skip inlined function blocks.
	(block_inlined_p): New.
	* block.h (struct block): Update comment.
	(block_inlined_p): New prototype.
	* blockframe.c (get_frame_block): Handle inlined functions.
	(get_frame_function): Do not use block_linkage_function.
	(block_innermost_frame): Use get_frame_block and contained_in.
	* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
	Skip over inlined functions.  Simplify epilogue check.
	(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
	Update comments.
	(set_momentary_breakpoint): Only accept non-inlined frames.
	(watch_command_1): Use frame_unwind_caller_pc and
	frame_unwind_caller_id instead of get_prev_frame.
	(until_break_command): Likewise.  Use get_stack_frame_id.
	* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
	* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
	* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
	(read_func_scope, new_symbol): Likewise.  Handle arguments specially
	for inlined functions without call site information.
	(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
	(die_specification): Treat DW_AT_abstract_origin as a specification.
	(read_type_die): Handle DW_TAG_inlined_subroutine.
	* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
	* frame.c (fprint_frame_id): Print inline depth.
	(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
	(skip_inlined_frames, get_stack_frame_id): New.
	(frame_unwind_caller_id): Use skip_inlined_frames.
	(frame_id_inlined_p): New.
	(frame_id_eq): Make the logic match the comments.  Add inline_depth
	check.
	(frame_id_inner): Handle inlined functions.
	(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
	(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
	(get_prev_frame_1): Check for inline frames.  Split out frame
	allocation to get_prev_frame_raw.
	(get_prev_frame_raw): New function.
	(get_prev_frame): Handle inline frames.
	(get_frame_pc): Use frame_unwind_pc.
	(get_frame_address_in_block): Skip inlined frames on both sides.
	(pc_notcurrent): Delete.
	(find_frame_sal): Rewrite to handle inline call sites.  Use
	get_frame_address_in_block.
	(deprecated_update_frame_pc_hack): Make static.
	* frame.h: Update comments.
	(struct frame_id): Add inline_depth.
	(enum frame_type): Add INLINE_FRAME.
	(frame_id_inlined_p, get_stack_frame_id): New prototypes.
	* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
	* infcmd.c (set_step_frame): New function.
	(step_once): Use set_step_frame.  Handle inlined functions.
	(until_next_command): Use set_step_frame.
	(finish_backward), finish_forward): Use get_stack_frame_id.
	(finish_command): Support inlined functions.
	* inferior.h (set_step_info): New prototype.
	* infrun.c (RESUME_ALL): Use minus_one_ptid.
	(clear_proceed_status): Clear step_stack_frame_id.
	(init_wait_for_inferior): Call clear_inline_frame_state.
	(init_execution_control_state): Make static.
	(set_step_info): New function.
	(init_thread_stepping_state): Do not set the symtab or line here.
	(stepped_in_from): New function.
	(handle_inferior_event): Handle inlined functions.  Use set_step_info.
	(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
	(struct inferior_status): Add step_stack_frame_id.
	(save_inferior_status, restore_inferior_status): Save and restore
	step_stack_frame_id.
	* inline-frame.c, inline-frame.h: New files.
	* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
	* regcache.c (regcache_write_pc): Call reinit_frame_cache.
	* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
	* stack.c (frame_show_address): New.
	(print_frame_info, print_frame): Use it.
	(find_frame_funname): Use get_frame_function.  Handle inlined blocks.
	(frame_info): Mark inlined functions.
	(backtrace_command_1): Use get_current_user_frame.
	(print_frame_local_vars, print_frame_label_vars): Update comments.
	(return_command): Refuse inlined functions.
	* symtab.c (lookup_symbol_aux_local): Stop at inlined function
	boundaries.
	(find_function_start_sal): Avoid inlined functions.
	(completion_list_add_fields): New function.
	(default_make_symbol_completion_list): Use it.  Use block_static_block
	and block_global_block.  Check for inlined functions.
	(skip_prologue_using_sal): Avoid line number comparison across
	inlining.
	* symtab.h (struct symbol): Add is_inlined.
	(SYMBOL_INLINED): New.
	* target.c (target_resume): Call clear_inline_frame_state.
	* valops.c (value_of_variable): Check block_inlined_p.

	gdb/doc/
	* gdb.texinfo (Debugging Optimized Code): New chapter.
	(Compiling for Debugging): Reference it.  Move some
	text to the new section.

	gdb/testsuite/
	* gdb.base/break.exp: Add an XFAIL for gcc/36748.
	* gdb.cp/annota2.exp: Accept frames-invalid in more places.
	* gdb.opt/Makefile.in (EXECUTABLES): Update.
	* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
	* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
	gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
	gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
	gdb.opt/inline-markers.c: New files.
	* lib/gdb.exp (skip_inline_frame_tests): New function.
	(skip_inline_var_tests): New function.
2009-06-28 00:20:24 +00:00
Daniel Jacobowitz c7ce8faacb * frame.c (frame_unwind_id): Renamed to ...
(frame_unwind_caller_id): ... this.  All callers updated.
	(frame_pc_unwind): Renamed to ...
	(frame_unwind_caller_pc): ... this.  All callers updated.
	* frame.h: Document frame_unwind_caller_WHAT functions.
	(frame_unwind_id): Renamed to ...
	(frame_unwind_caller_id): ... this.
	(frame_pc_unwind): Renamed to ...
	(frame_unwind_caller_pc): ... this.
	* hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
	* stack.c (parse_frame_specification_1): Do not rely on
	frame_unwind_id.
2009-06-28 00:05:14 +00:00
Ulrich Weigand d80b854b33 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
use it instead of current_gdbarch.
	* frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
	* arm-tdep.c (arm_skip_prologue): Pass architecture to
	deprecated_pc_in_call_dummy.

	* symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
	Use it instead of current_gdbarch.
	* symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
	* breakpoint.c (expand_line_sal_maybe): Pass architecture to
	skip_prologue_using_sal.
	* arm-tdep.c (skip_prologue_using_sal): Likewise.
	* lm32-tdep.c (lm32_skip_prologue): Likewise.
	* m32-tdep.c (m32c_skip_prologue): Likewise.
	* mips-tdep.c (mips_skip_prologue): Likewise.
	* moxie-tdep.c (moxie_skip_prologue): Likewise.
	* mt-tdep.c (mt_frame_unwind_cache): Likewise.
	* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
	* frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
	it to skip_prologue_using_sal.  Update call sites ...
	(frv_skip_prologue, frv_frame_unwind_cache): ... here.

	* mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
	(check_for_saved): Use it instead of current_gdbarch.
	(mn10300_analyze_prologue): Set it.

	* value.c (using_struct_return): Add GDBARCH parameter.  Use it
	instead of current_gdbarch.
	* value.h (using_struct_return): Add GDBARCH parameter.
	* eval.c (evaluate_subexp_standard): Pass architecture to
	using_struct_return.
	* infcall.c (call_function_by_hand): Likewise.
	* stack.c (return_command): Likewise.
	* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

	* symtab.c (in_prologue): Add GDBARCH parameter.  Use it instead of
	current_gdbarch.
	* symtab.h (in_prologue): Add GDBARCH parameter.
	* infrun.c (handle_inferior_event): Pass architecture to in_prologue.

	* eval.c (evaluate_subexp_standard): Use expression architecture
	instead of current_gdbarch.

	* c-lang.c (evaluate_subexp_c): Use expression architecture and
	language instead of current_gdbarch and current_language.

	* printcmd.c (do_one_display): Use expression architecture instead
	of current_gdbarch.

	* infcmd.c (print_return_value): Use architecture of stop_regcache
	instead of current_gdbarch.
	(print_vector_info, print_float_info): Remove GDBARCH argument,
	use frame architecture instead.
	(vector_info, float_info): Update calls.

	* objc-lang.c (objc_skip_trampoline): Use frame architecture
	instead of current_gdbarch.

	* parse.c (write_dollar_variable): Use parse architecture instead
	of current_gdbarch.

	* source.c (line_info): Use objfile architecture instead of
	current_gdbarch.

	* symtab.c (find_function_start_sal): Use gdbarch instead of
	current_gdbarch.
	(print_msymbol_info): Use objfile architecture instead of
	current_gdbarch.

	* valops.c (value_assign): Use frame architecture instead of
	current_gdbarch.
2009-06-17 18:43:24 +00:00
Pedro Alves 9d49bdc28a * frame.c (has_stack_frames): Make public.
(get_prev_frame): Don't allow a NULL this_frame anymore.
	* frame.h (has_stack_frames): Declare.
	* varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
	to get_prev_frame, instead start at get_current_frame.
	(varobj_create): Check has_stack_frames before getting any frame;
	eliminate one usage of deprecated_safe_get_selected_frame.
2009-02-05 17:28:21 +00:00
Pedro Alves 0516318b5d * infrun.c (normal_stop): Don't call
deprecated_update_frame_pc_hack.
	* frame.c (deprecated_update_frame_pc_hack)
	(deprecated_update_frame_base_hack): Delete, and ...
	(create_new_frame): ... inline here.
	* frame.h (deprecated_update_frame_pc_hack)
	(deprecated_update_frame_base_hack): Delete declarations.
2009-01-24 19:17:24 +00:00
Joel Brobecker 0fb0cc7590 Updated copyright notices for most files. 2009-01-03 05:58:08 +00:00
Ulrich Weigand a45ae3ed06 * dummy-frame.h (dummy_frame_pop): Add prototype.
* dummy-frame.c: Include "observer.h".
	(dummy_frame_push): Do not check for stale frames.
	(dummy_frame_pop): New function.
	(cleanup_dummy_frames): New function.
	(_initialize_dummy_frame): Install it as inferior_created observer.

	* frame.h (struct frame_id): Update comments.
	(frame_id_inner): Remove prototype.
	* frame.c (frame_id_inner): Make static.  Add comments.
	(frame_find_by_id): Update frame_id_inner safety net check to avoid
	false positives for targets using non-contiguous stack ranges.
	(get_prev_frame_1): Update frame_id_inner safety net check.
	(frame_pop): Call dummy_frame_pop when popping a dummy frame.

	* stack.c (return_command): Directly pop the selected frame.
	* infrun.c (handle_inferior_event): Remove dead code.
	* i386-tdep.c (i386_push_dummy_call): Update comment.
2008-08-26 17:40:25 +00:00
Ulrich Weigand 029a67e44a * frame.h (frame_map_regnum_to_name): Remove prototype.
(frame_map_name_to_regnum): Remove prototype.
	* frame.c (frame_map_regnum_to_name): Remove.
	(frame_map_name_to_regnum): Remove.
	(frame_unwind_register_value): Use user_reg_map_regnum_to_name
	instead of frame_map_regnum_to_name.
	* ax-gdb.c: Include "user-regs.h".
	(gen_expr): Use user_reg_map_name_to_regnum instead of
	frame_map_name_to_regnum.
	* eval.c:  Include "user-regs.h".
	(evaluate_subexp_standard): Use user_reg_map_name_to_regnum
	instead of frame_map_name_to_regnum.
	* infcmd.c (registers_info): Likewise.
	* parse.c: Include "user-regs.h".
	(write_dollar_variable): Use user_reg_map_name_to_regnum
	instead of frame_map_name_to_regnum.
	* tracepoint.c: Include "user-regs.h".
	(encode_actions): Use user_reg_map_name_to_regnum
	instead of frame_map_name_to_regnum.
	* valops.c: Include "user-regs.h".
	(value_fetch_lazy): Use user_reg_map_regnum_to_name instead
	of frame_map_regnum_to_name.
2008-08-21 20:13:08 +00:00
Daniel Jacobowitz eb2f4a08ce Revert frame_unwind_caller_pc / frame_unwind_caller_id. 2008-07-15 23:29:24 +00:00
Daniel Jacobowitz 54af988d1e * frame.c (frame_unwind_id): Renamed to ...
(frame_unwind_caller_id): ... this.  All callers updated.
	(frame_pc_unwind): Renamed to ...
	(frame_unwind_caller_pc): ... this.  All callers updated.
	* frame.h: Document frame_unwind_caller_WHAT functions.
	(frame_unwind_id): Renamed to ...
	(frame_unwind_caller_id): ... this.
	(frame_pc_unwind): Renamed to ...
	(frame_unwind_caller_pc): ... this.
	* hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
	* stack.c (parse_frame_specification_1): Do not rely on
	frame_unwind_id.
2008-07-15 18:58:32 +00:00
Daniel Jacobowitz d56907c103 * frame.c (frame_sp_unwind): Delete.
(get_frame_sp): Do not use it.
	* frame.h (frame_sp_unwind): Delete prototype.
2008-07-15 18:50:15 +00:00