Use cleanup to avoid leaking memory if an error occurs during tui
start up.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
buf_ptr is freed.
Calling tui_enable too early in tui_layout_command can leave the tui in
an enabled state if the user has entered an invalid layout name.
Instead postpone the call to tui_enable until later in
tui_set_layout_for_display_command just before the layout is changed.
gdb/ChangeLog:
* tui/tui-layout.c (tui_layout_command): Move call to tui_enable
into ...
(tui_set_layout_for_display_command): ...here, before calling
tui_set_layout. Only set the layout if gdb has not already
entered the TUI_FAILURE state.
Add layout name completion for the layout command.
gdb/ChangeLog:
* tui/tui-layout.c (layout_completer): New function.
(_initialize_tui_layout): Set completer on layout command.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add test for completion of layout
names.
The layout command supports the layout names $FREGS, $GREGS, $SREGS,
and $REGS. The intention of these layout names was to display the tui
register window with a specific set of registers.
First, these layout names no longer work, and haven't for a while, using
any of them will just result in switching to the general register view.
Second there is already the command 'tui reg GROUP' command to set the
displayed register set to GROUP, so making the layout command also
control the register set feels like unnecessary overloading of the
layout command.
This commit removes all code relating to supporting the register set
specific names from the layout command. Afterwards the user can select
an available layout using the layout command, and control the choice of
register set using the 'tui reg GROUP' command.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout): Remove
tui_register_display_type parameter. Remove all checking of this
parameter, and reindent function. Update header comment.
(tui_set_layout_for_display_command): Rename to...
(tui_set_layout_by_name): ...this, and don't check for different
register class types, don't pass a tui_register_display_type to
tui_set_layout. Update header comment.
(layout_names): Remove register set specific names.
* tui/tui-layout.h (tui_set_layout): Remove
tui_register_display_type parameter.
* tui/tui.c (tui_rl_change_windows): Don't pass a
tui_register_display_type to tui_set_layout.
(tui_rl_delete_other_windows): Likewise.
(tui_enable): Likewise.
* tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
(TUI_FLOAT_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_REGS_NAME): Remove.
(TUI_GENERAL_REGS_NAME_LOWER): Remove.
(TUI_SPECIAL_REGS_NAME): Remove.
(TUI_SPECIAL_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
(enum tui_register_display_type): Remove.
(struct tui_layout_def): Remove regs_display_type and
float_regs_display_type fields.
(struct tui_data_info): Remove regs_display_type field.
(tui_layout_command): Use new name for
tui_set_layout_for_display_command.
* tui/tui-data.c (layout_def): Don't initialise removed fields.
(tui_clear_win_detail): Don't initialise removed fields of
win_info.
* tui/tui-regs.c (tui_show_registers): Use new name for
tui_set_layout_for_display_command.
* tui/tui.h (tui_set_layout_for_display_command): Rename
declaration to...
(tui_set_layout_by_name): ...this.
* printcmd.c (display_command): Remove tui related layout call,
and reindent.
The function tui_dispatch_ctrl_char() has an old workaround (from 1999)
for buggy terminals and/or ncurses library that don't return page
up/down keys as single characters. Because the workaround is so old, I
think the bug it is targetting is no longer relevant anymore.
But more importantly, the workaround is itself buggy: it 1) performs a
blocking call to wgetch() and 2) if the key returned by wgetch() does
not make up a relevant key sequence it throws away the input instead of
pushing it back via ungetch(). And indeed the workaround breaks Alt-key
sequences under TERM=xterm because of bug #2.
So this patch removes the buggy workaround and tidies up the function
accordingly.
I personally tested this change on a recent xterm (with TERM=xterm) in
Fedora 20 and had no problems with having ncurses properly interpret
page up/down keys. And Alt-key sequences now work when TERM=xterm too.
gdb/ChangeLog:
* tui/tui-command.c: Remove include of <ctype.h>.
(tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
The control variable win_resized must be cleared before responding to
it.
Otherwise there is a small window where another SIGWINCH might occur in
between the handling of an earlier SIGWINCH and the clearing of
win_resized, at which point win_resized would be set (again) by the
signal handler. Shortly thereafter we would clear win_resized even
though we only handled the earlier SIGWINCH but not the latest one.
This chain of events is all avoided if we clear win_resized first.
gdb/ChangeLog:
* tui/tui-win.c (tui_async_resize_screen): Clear win_resized
first before resizing the window.
* tui.c (tui_enable): Likewise.
When in the CLI, GDB's "width" and "height" variables are not kept in sync
when the underlying terminal gets resized.
This patch fixes this issue by making sure sure to update GDB's "width"
and "height" variables in the !tui_active case of our SIGWINCH handler.
gdb/ChangeLog:
* tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
(tui_sigwinch_handler): Still update our idea of
the terminal's width and height even when TUI is not active.
... to replace the roundabout pattern of
execute_command ("set width %d");
execute_command ("set height %d");
for doing the same thing.
gdb/ChangeLog:
* utils.h (set_screen_width_and_height): Declare.
* utils.c (set_screen_width_and_height): Define.
* tui/tui-win.c (tui_update_gdb_sizes): Use it.
In tui_set_source_content(), when offset == 0 the source and destination
pointers of the call to strcpy() are actually the same. In this case
not only is strcpy() unnecessary but it is also UB when the two strings
overlap.
gdb/ChangeLog:
* tui/tui-source.c (tui_set_source_content): Avoid calling
strcpy() when offset is 0.
For no good reason the function tui_free_window() is freeing the locator
window when we pass it an SRC_WIN or a DISASSEM_WIN. This behavior
doesn't make much sense because the locator window is always visible and
its contents do not change when the main window changes.
This behavior triggers the above PR because when we switch from one TUI
window to another (in the PR, from the src window to the asm window) we
call tui_free_window() on the previously active window (in the PR, the
src window). The function then frees the src window along with the
locator window and later we segfault when the now-active asm window
tries to query the locator window about the inferior's PC.
This patch fixes this apparently wrong behavior by changing
tui_free_window() to not free the locator window when we pass it an
SRC_WIN or a DISASSEM_WIN.
gdb/ChangeLog:
PR gdb/18155
* tui/tui-data.c (tui_free_window): Don't free the locator
window when passed an SRC_WIN or a DISASSEM_WIN.
The 'content' field of struct tui_gen_win_info currently has type
void ** but the field always stores an object of type tui_win_content.
Instead of unnecessarily casting to and from void ** we should just give
the field the type tui_win_content in the first place.
This patch does this and also eliminates all now-redundant casts
involving the 'content' struct field that I could find.
gdb/ChangeLog:
* tui/tui-data.h (struct tui_win_element): Forward-declare.
(tui_win_content): Move declaration.
(struct tui_gen_win_info): Give 'content' field the
type tui_win_content.
* tui/tui-data.c (init_content_element): Remove redundant and
erroneous casts.
(tui_add_content_elements): Remove erroneous cast.
* tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
casts.
(tui_get_begin_asm_address): Likewise.
* tui/tui-regs.c (tui_show_registers): Likewise.
(tui_show_register_group): Likewise.
(tui_display_registers_from): Likewise.
(tui_check_register_values): Likewise.
* tui/tui-source.c (tui_set_source_content): Likewise.
(tui_set_source_content_nil): Likewise.
(tui_source_is_displayed): Likewise.
* tui/tui-stack.c (tui_show_locator_content): Likewise.
(tui_set_locator_fullname): Likewise.
(tui_set_locator_info): Likewise.
(tui_show_frame_info): Likewise.
* tui/tui-winsource.c (tui_clear_source_content): Likewise.
(tui_show_source_line): Likewise.
(tui_horizontal_source_scroll): Likewise.
(tui_update_breakpoint_info): Likewise.
(tui_set_exec_info_content): Likewise.
(tui_show_exec_info_content): Likewise.
(tui_alloc_source_buffer): Likewise.
(tui_line_is_displayed): Likewise.
(tui_addr_is_displayed): Likewise.
In readline 6.3, the semantics of SIGWINCH handling has changed.
When a SIGWINCH signal is raised, readline's rl_sigwinch_handler() now
does not immediately call rl_resize_terminal(). Instead it sets a flag
that is checked by RL_CHECK_SIGNALS() at a point where readline has
control, and calls rl_resize_terminal() if said flag is set.
This change is item (c) in https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
c. Fixed a bug that caused readline to try and run code to modify its idea
of the screen size in a signal handler context upon receiving a SIGWINCH.
This change in behavior is important to us because TUI's
tui_sigwinch_handler() relies on the assumption that by the time it's
called, readline will have updated its knowledge of the terminal
dimensions via rl_resize_terminal(). Since this assumption no longer
holds true, TUI's SIGWINCH handling does not work correctly with
readline 6.3.
To fix this issue this patch makes TUI explicitly call
rl_resize_terminal() in tui_async_resize_screen() at the point where
current terminal dimensions are needed. (We could call it in
tui_sigwinch_handler too, but since readline avoids doing it, we are
probably safer off avoiding to call it in signal handler context as
well.) After this change, SIGWINCH handling continues to work properly
with both readline 6.2 and 6.3.
Since we no longer need it, we could now explicitly disable readline's
SIGWINCH handler by setting rl_catch_sigwinch to zero early on in the
program startup but I can't seem to find a good spot to place this
assignment (the first call to rl_initialize() occurs in
tui_initialize_readline() so the assignment should occur before then),
and the handler is harmless anyway.
gdb/ChangeLog:
* tui/tui-win.c (tui_async_resize_screen): Call
rl_resize_terminal().
Pedro Alves:
The commands that enables aren't even documented in the manual.
Judging from that, I assume that only wdb users would ever really
be using the --xdb switch.
I think it's time to drop "support" for the --xdb switch too. I
looked through the commands that that exposes, the only that looked
potentially interesting was "go", but then it's just an alias
for "tbreak+jump", which can easily be done with "define go...end".
I'd rather free up the "go" name for something potentially
more interesting (either run control, or maybe even unrelated,
e.g., for golang).
gdb/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add removed -xdb.
* breakpoint.c (command_line_is_silent): Remove xdb_commands
conditional.
(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
and lb.
* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
va.
* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
conditional.
* defs.h (xdb_commands): Remove declaration.
* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
* guile/scm-cmd.c (command_classes): Remove xdb from comment.
* infcmd.c (run_no_args_command, go_command): Remove.
(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
* infrun.c (xdb_handle_command): Remove.
(_initialize_infrun): Remove xdb_commands for lz and z.
* main.c (xdb_commands): Remove variable.
(captured_main): Remove "xdb" from long_options.
(print_gdb_help): Remove --xdb from help.
* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
* stack.c (backtrace_full_command, args_plus_locals_info)
(current_frame_command): Remove.
(_initialize_stack): Remove xdb_commands for t, T and l.
* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
* thread.c (_initialize_thread): Remove xdb_commands condition.
* tui/tui-layout.c (tui_toggle_layout_command)
(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
(_initialize_tui_layout): Remove xdb_commands for td and ts.
* tui/tui-regs.c (tui_scroll_regs_forward_command)
(tui_scroll_regs_backward_command): Remove.
(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
(_initialize_tui_win): Remove xdb_commands for U and w.
* utils.c (pagination_on_command, pagination_off_command): Remove.
(initialize_utils): Remove xdb_commands for am and sm.
gdb/doc/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Mode Options): Remove -xdb.
gdb/ChangeLog:
* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
before the second loop, to avoid undefined behavior. Reported by
Anton Blanchard <anton@samba.org>.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
In C++, we can't do arithmetic on enums. This patch fixes build errors like:
src/gdb/i386-tdep.c: In function ‘int i386_stap_parse_special_token(gdbarch*, stap_parse_info*)’:
src/gdb/i386-tdep.c:4309:7: error: no match for ‘operator++’ (operand type is ‘i386_stap_parse_special_token(gdbarch*, stap_parse_info*)::<anonymous enum>’)
++current_state;
^
...
src/gdb/rs6000-tdep.c:4265:18: error: no match for ‘operator++’ (operand type is ‘powerpc_vector_abi’)
src/gdb/arm-tdep.c:9428:71: error: no match for ‘operator++’ (operand type is ‘arm_float_model’)
src/gdb/arm-tdep.c:9465:64: error: no match for ‘operator++’ (operand type is ‘arm_abi_kind’)
...
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
local used to iterate over enums.
* completer.c (signal_completer): Likewise.
* i386-tdep.c (i386_stap_parse_special_token): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
* tui/tui-layout.c (next_layout, prev_layout): Likewise.
* tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
(tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
* tui-wingeneral.c (tui_refresh_all): Likewise.
In C, an enum or structure defined inside other structure has global
scope just like it had been defined outside the struct in the first
place. However, in C++, such a nested structure is given a name that
is nested inside the structure. This patch moves such affected
structures/enums out to global scope, so that code using them works
the same in C++ as it works today in C.
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* dwarf2-frame.c (enum cfa_how_kind, struct
dwarf2_frame_state_reg_info): Move out of struct
dwarf2_frame_state.
* dwarf2read.c (struct tu_stats): Move out of struct
dwarf2_per_objfile.
(struct file_entry): Move out of struct line_header.
(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
typedef_field_list): Move out of struct field_info.
* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
Move out of struct dynamic_prop.
(union type_owner, union field_location, struct field, struct
range_bounds, union type_specific): Move out of struct main_type.
(struct fn_fieldlist, struct fn_field, struct typedef_field)
(VOFFSET_STATIC): Move out of struct cplus_struct_type.
(struct call_site_target, union call_site_parameter_u, struct
call_site_parameter): Move out of struct call_site.
* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
m32c_prologue.
(enum srcdest_kind): Move out of struct srcdest.
* main.c (enum cmdarg_kind): Move out of struct cmdarg.
* prologue-value.h (enum prologue_value_kind): Move out of struct
prologue_value.
* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
gdbarch_tdep.
* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
out of struct field_info.
* symfile.h (struct other_sections): Move out of struct
section_addr_info.
* symtab.c (struct symbol_cache_slot): Move out struct
block_symbol_cache.
* target-descriptions.c (enum tdesc_type_kind): Move out of
typedef struct tdesc_type.
* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
struct tui_line_or_address.
* value.c (enum internalvar_kind, union internalvar_data): Move
out of struct internalvar.
* xtensa-tdep.h (struct ctype_cache): Move out of struct
gdbarch_tdep.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
This patch teaches the TUI to resize itself asynchronously instead of
synchronously. Asynchronously resizing the screen when the underlying
terminal gets resized is the more intuitive behavior and is surprisingly
simple to implement thanks to GDB's async infrastructure.
The implementation is straightforward. TUI's SIGWINCH handler is just
tweaked to asynchronously invoke a new callback,
tui_async_resize_screen, which is responsible for safely resizing the
screen. Care must be taken to not to attempt to asynchronously resize
the screen while the TUI is not active. When the TUI is not active, the
callback will do nothing, but the screen will yet be resized in the next
call to tui_enable() by virtue of win_resized being TRUE.
(So, after the patch there are still two places where the screen gets
resized: one in tui_enable() and the other now in
tui_async_resize_screen() as opposed to being in
tui_handle_resize_during_io(). The one in tui_enable() is still
necessary to handle the case where the terminal gets resized inside the
CLI: in that case, the TUI still needs resizing, but it must wait until
the TUI gets re-enabled.)
gdb/ChangeLog:
* tui/tui-io.c (tui_handle_resize_during_io): Remove this
function.
(tui_putc): Don't call tui_handle_resize_during_io.
(tui_getc): Likewise.
(tui_mld_getc): Likewise.
* tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
(tui_sigwinch_token): New static variable.
(tui_initialize_win): Adjust documentation. Set
tui_sigwinch_token.
(tui_async_resize_screen): New asynchronous callback.
(tui_sigwinch_handler): Adjust documentation. Asynchronously
invoke tui_async_resize_screen.
The function key_is_command_char() is simply a predicate that determines
whether the function tui_dispatch_ctrl_char() will do anything useful.
Since tui_dispatch_ctrl_char() performs the same checks as
key_is_command_char() it is unnecessary to keep key_is_command_char()
around. This patch removes this useless function and instead
unconditionally calls tui_dispatch_ctrl_char() inside its only caller,
tui_getc().
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Don't call key_is_command_char.
(key_is_command_char): Delete.
If the user:
#1 - disables the TUI
#2 - resizes the terminal
#3 - and then re-enables the TUI
the next wgetch() returns KEY_RESIZE. This indicates to the ncurses
client that ncurses detected that the terminal has been resized. We
don't handle KEY_RESIZE anywhere, so it gets passed on to readline
which interprets it as a multibyte character, and then the end result
is that the first key press after enabling the TUI is misinterpreted.
We shouldn't really need to handle KEY_RESIZE (and not all ncurses
implementations have that). We have our own SIGWINCH handler, and,
when we re-enable the TUI, we explicitly detect terminal resizes and
resize all windows. The reason ncurses currently does detects a
resize is that something within tui_enable forces a refresh/display of
some window before we get to do the actual resizing. Setting a break
on ncurses' 'resizeterm' function helps find the culprit(s):
(top-gdb) bt
#0 resizeterm (ToLines=28, ToCols=114) at ../../ncurses/base/resizeterm.c:462
#1 0x0000003b42812f3f in _nc_update_screensize (sp=0x2674730) at ../../ncurses/tinfo/lib_setup.c:443
#2 0x0000003b0821cbe0 in doupdate () at ../../ncurses/tty/tty_update.c:726
#3 0x0000003b08215539 in wrefresh (win=0x2a7bc00) at ../../ncurses/base/lib_refresh.c:65
#4 0x00000000005257cb in tui_refresh_win (win_info=0xd73d60 <_locator>) at /home/pedro/gdb/mygit/src/gdb/tui/tui-wingeneral.c:60
#5 0x000000000052265b in tui_show_locator_content () at /home/pedro/gdb/mygit/src/gdb/tui/tui-stack.c:269
#6 0x00000000005273a6 in tui_set_key_mode (mode=TUI_COMMAND_MODE) at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:321
#7 0x00000000005278c7 in tui_enable () at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:494
#8 0x0000000000527011 in tui_rl_switch_mode (notused1=1, notused2=1) at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:108
That is, tui_enable calls tui_set_key_mode before we've resized all
windows, and that refreshes a window as side effect.
And if we're already debugging something (there's a frame), then we'll
instead show a window from within tui_show_frame_info:
(top-gdb) bt
#0 resizeterm (ToLines=28, ToCols=114) at ../../ncurses/base/resizeterm.c:462
#1 0x0000003b42812f3f in _nc_update_screensize (sp=0x202e6c0) at ../../ncurses/tinfo/lib_setup.c:443
#2 0x0000003b0821cbe0 in doupdate () at ../../ncurses/tty/tty_update.c:726
#3 0x0000003b08215539 in wrefresh (win=0x2042890) at ../../ncurses/base/lib_refresh.c:65
#4 0x00000000005257cb in tui_refresh_win (win_info=0xd73d60 <_locator>) at /home/pedro/gdb/mygit/src/gdb/tui/tui-wingeneral.c:60
#5 0x000000000052265b in tui_show_locator_content () at /home/pedro/gdb/mygit/src/gdb/tui/tui-stack.c:269
#6 0x0000000000522931 in tui_show_frame_info (fi=0x16b9cc0) at /home/pedro/gdb/mygit/src/gdb/tui/tui-stack.c:364
#7 0x00000000005278ba in tui_enable () at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:491
#8 0x0000000000527011 in tui_rl_switch_mode (notused1=1, notused2=1) at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:108
The fix is to resize windows earlier.
gdb/ChangeLog:
2015-02-17 Pedro Alves <palves@redhat.com>
* tui/tui.c (tui_enable): Resize windows before anything
might show a window.
This patch fixes a pair of TUI issues related to screen resizing:
1. In tui_handle_resize_during_io(), when the TUI screen gets resized,
we fail to update GDB's idea about the height of the output window.
You can see this bug by doing:
a. Enter TUI mode.
b. "show height"
c. Resize the terminal.
d. "show height"
And observe that despite resizing the terminal, the reported height
remains unchanged. Note that a similar issue exists in the CLI.
The fix for this is simple: call tui_update_gdb_sizes() after performing
a resize, so that the "height" variable remains consistent with the
height of TUI's output window.
2. In tui_enable(), the call to tui_update_gdb_sizes() may clobber
readline's idea of the actual screen dimensions, and a subsequent
pending resize will use bogus terminal dimensions.
You can see this bug by doing:
a. Enter TUI mode.
b. Exit TUI mode.
c. Resize the terminal.
d. Enter TUI mode.
e. Press a key to resize the screen.
And observe that the terminal gets incorrectly resized to the wrong
dimensions. To fix this issue, we should oppurtunistically resize the
screen in tui_enable(). That way we eliminate the possibility of a
pending resize triggering right after we call tui_update_gdb_sizes().
gdb/ChangeLog:
* tui/tui-io.c (tui_handle_resize_during_io): Call
tui_update_gdb_sizes() after resizing the screen.
* tui/tui.c (tui_enable): Resize the terminal before
calling tui_update_gdb_sizes().
If we submit a command while the prompt cursor is somewhere other than
at the end of the command line, the command line gets truncated as the
command window gets shifted one line up. This happens because we fail
to properly move the cursor to the end of the command line before
transmitting the newline to ncurses. We need to move the cursor because
when ncurses outputs a newline it truncates any text that appears
past the end of the cursor.
The fix is generic enough to work properly even in multi-line secondary
prompts like the quit prompt.
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Move cursor to the end of the command
line before printing a newline.
In the TUI mode, we call wrefresh after outputting every single
character. This results in the I/O becoming very slow. Fix this by
delaying refreshing the console window until an explicit flush of
gdb_stdout is requested, or a write to any other (unbuffered) file is
done.
2015-02-04 Doug Evans <dje@google.com>
Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
PR tui/17810
* tui/tui-command.c (tui_refresh_cmd_win): New function.
* tui/tui-command.c (tui_refresh_cmd_win): Declare.
* tui/tui-file.c: #include tui/tui-command.h.
(tui_file_fputs): Refresh command window if stream is not gdb_stdout.
(tui_file_flush): Refresh command window if stream is gdb_stdout.
* tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
This copies a lot of code from readline, but this is temporary.
Readline currently doesn't export what we need.
The plan is to have something that has been working for awhile,
and then we'll have a complete story to present to the readline
maintainers.
gdb/ChangeLog:
* cli-out.c: #include completer.h, readline/readline.h.
(cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
(cli_mld_flush, cld_mld_erase_entire_line): Ditto.
(cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
* cli-out.h (cli_display_match_list): Declare.
* completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
(ELLIPSIS_LEN): Ditto.
(gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
(gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
(gdb_fnprint, gdb_print_filename): Ditto.
(gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
(gdb_display_match_list): Ditto.
* completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
(mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
(mld_beep_ftype, mld_read_key_ftype): Ditto.
(match_list_displayer): New struct.
(gdb_display_match_list): Declare.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: #include completer.h.
(printable_part, PUTX, print_filename, get_y_or_n): Delete.
(tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
(tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
(tui_mld_getc, tui_mld_read_key): Ditto.
(tui_rl_display_match_list): Rewrite.
(tui_handle_resize_during_io): New arg for_completion. All callers
updated.
gdb/
2015-01-31 Eli Zaretskii <eliz@gnu.org>
* tui/tui-io.c (tui_expand_tabs): New function.
(tui_puts, tui_redisplay_readline): Expand TABs into the
appropriate number of spaces.
* tui/tui-regs.c: Include tui-io.h.
(tui_register_format): Call tui_expand_tabs to expand TABs into
the appropriate number of spaces.
* tui/tui-io.h: Add prototype for tui_expand_tabs.
gdb/
2015-01-22 Eli Zaretskii <eliz@gnu.org>
* gdb/tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
fails with the 1st arg NULL, try again with "unknown". Don't test
the "cup" capability: it isn't supported by the Windows port of
ncurses, but the Windows console driver is still capable of
supporting TUI.
gdb/
2015-01-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
functions.
(_initialize_tui_win) <border-kind, border-mode>:
<active-border-mode>: Use tui_set_var_cmd as the "set" function.
* tui/tui-win.h: Add prototype for tui_rehighlight_all.
gdb/ChangeLog:
2015-01-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-win.c (tui_set_tab_width_command): Delete and
recreate the source and the disassembly windows, to show the
effect of the changed tab size immediately.
tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
Doc fix.
doc/gdb.texinfo (TUI Commands): Document the possible
values of NAME argument to 'winheight' command. Explain the
effect of 'tabset' setting better.
gdb/tui/tui-data.h (LINE_PREFIX): Make shorter
(MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
"Thread NNNNN.XXXX" thread ID notation on Windows.
This patch primarily rewrites defaulted_query() to use
gdb_readline_wrapper() to prompt the user for input, like
prompt_for_continue() does. The motivation for this rewrite is to be
able to reuse the default query hook in TUI, obviating the need for a
custom TUI query hook.
However, having TUI use the default query mechanism exposed a couple of
latent bugs in tui_redisplay_readline() related to the handling of
multi-line prompts, in particular GDB's multi-line quit prompt.
The first issue is an off-by-one error in the calculation of the height
of the prompt. The check in question should be col <= prev_col, not c <
prev_col, to properly account for the case when a prompt contains
multiple consecutive newlines. Failing to do so makes TUI have the
wrong idea of the vertical height of the prompt. This patch fixes the
column check.
The second issue is that cur_line does not get updated to reflect the
cursor position if the user's prompt cursor is at the end of the prompt
(i.e. if rl_point == rl_end). cur_line only gets updated if rl_point
lies between 0..rl_end-1 because that is the bounds of the for loop
responsible for updating cur_line. This patch changes the loop's bounds
to 0..rl_end so that cur_line always gets updated.
With these two bug fixes out of the way, the default query mechanism
works well in TUI even with multi-line prompts like GDB's quit prompt.
gdb/ChangeLog:
* utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
to prompt for input.
* tui/tui-hooks.c (tui_query_hook): Remove.
(tui_install_hooks): Don't set deprecated_query_hook.
* tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
height calculation. Always update the command window's cur_line.
SA_RESTART allows system calls to be restarted across a signal handler.
By specifying this flag we fix the issue where if the user is being
prompted to answer yes or no, and the terminal gets resized in the
meantime, the prompt will think that the user sent an EOF and so it will
take the default action for that prompt (in the case of the quit prompt,
it will quit GDB).
gdb/ChangeLog:
* tui/tui-win.c (tui_initialize_win): Specify SA_RESTART when
registering the signal handler.
This patch fixes the annoying bug where key sequences such as Alt_F or
Alt_B (go forward or backwards by a word) do not behave promptly in TUI.
You have to press a third key in order for the key sequence to register.
This is mostly ncurses' fault. Calling wgetch() normally causes ncurses
to read only a single key from stdin. However if the key read is the
start-sequence key (^[ a.k.a. ESC) then wgetch() reads TWO keys from
stdin, storing the 2nd key into an internal FIFO buffer and returning
the start-sequence key. The extraneous read of the 2nd key makes us
miss its corresponding stdin event, so the event loop blocks until a
third key is pressed. This explains why such key sequences do not
behave promptly in TUI.
To fix this issue, we must somehow compensate for the missed stdin event
corresponding to the 2nd byte of a key sequence. This patch achieves
this by hacking up the stdin event handler to conditionally execute the
readline callback multiple times in a row. This is done via a new
global variable, call_stdin_event_handler_again_p, which is set from
tui_getc() when we receive a start-sequence key and notice extra pending
input in the ncurses buffer.
Tested on x86_64-unknown-linux-gnu.
gdb/ChangeLog:
* event-top.h (call_stdin_event_handler_again_p): Declare.
* event-top.c (call_stdin_event_handler_again_p): Define.
(stdin_event_handler): Use it.
* tui/tui-io.c (tui_getc): Prepare to call the stdin event
handler again if there is pending input following a
start sequence.
Basically the problem is that "symtab" is ambiguous.
Is it the primary symtab (where we canonically think of
blockvectors as being stored) or is it for a specific file
(where each file's line table is stored) ?
gdb_disassembly wants the symtab that contains the line table
but is instead getting the primary symtab.
gdb/ChangeLog:
PR symtab/17559
* symtab.c (find_pc_line_symtab): New function.
* symtab.h (find_pc_line_symtab): Declare.
* disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of
find_pc_symtab.
* tui/tui-disasm.c (tui_set_disassem_content): Ditto.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto.
* tui/tui-source.c (tui_vertical_source_scroll): Ditto.
* tui/tui-win.c (make_visible_with_new_height): Ditto.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto.
(tui_display_main): Call find_pc_line_symtab instead of find_pc_line.
gdb/testsuite/ChangeLog:
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
Older versions of ncurses' newterm can't take NULL for their ofp and ifp
parameters. Newer versions can, and they fall back on stdout/stdin if
that is the case.
This patch explicitly passes stdout/stdin to the call to newterm to
avoid segfaulting with older ncurses.
gdb/Changelog:
2014-11-04 Simon Marchi <simon.marchi@ericsson.com>
* tui/tui.c (tui_enable): Pass stdout and stdin to newterm.
I noticed that with:
$ TERM=dumb ./gdb -q -nx
<c-x,a>
Cannot enable the TUI: terminal doesn't support cursor addressing [TERM=dumb]
(gdb)
The next key the user types is silently eaten.
The problem is that we're throwing an exception while in a readline
callback that isn't prepared for that:
(top-gdb) bt
#0 tui_enable () at /home/pedro/gdb/mygit/build/../src/gdb/tui/tui.c:388
#1 0x000000000051f47b in tui_rl_switch_mode (notused1=1, notused2=1) at /home/pedro/gdb/mygit/build/../src/gdb/tui/tui.c:101
#2 0x0000000000768d6f in _rl_dispatch_subseq (key=1, map=0xd069c0 <emacs_ctlx_keymap>, got_subseq=0) at /home/pedro/gdb/mygit/build/../src/readline/readline.c:774
#3 0x0000000000768acb in _rl_dispatch_callback (cxt=0x1ce6190) at /home/pedro/gdb/mygit/build/../src/readline/readline.c:686
#4 0x000000000078120b in rl_callback_read_char () at /home/pedro/gdb/mygit/build/../src/readline/callback.c:170
#5 0x0000000000619445 in rl_callback_read_char_wrapper (client_data=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/event-top.c:166
#6 0x000000000061981b in stdin_event_handler (error=0, client_data=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/event-top.c:372
#7 0x000000000061840e in handle_file_event (data=...) at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:762
#8 0x00000000006178f5 in process_event () at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:339
#9 0x00000000006179bc in gdb_do_one_event () at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:403
#10 0x0000000000617a0c in start_event_loop () at /home/pedro/gdb/mygit/build/../src/gdb/event-loop.c:428
Here, in _rl_dispatch_subseq:
769
770 rl_executing_keymap = map;
771
772 rl_dispatching = 1;
773 RL_SETSTATE(RL_STATE_DISPATCHING);
774 (*map[key].function)(rl_numeric_arg * rl_arg_sign, key);
775 RL_UNSETSTATE(RL_STATE_DISPATCHING);
776 rl_dispatching = 0;
777
778 /* If we have input pending, then the last command was a prefix
779 command. Don't change the state of rl_last_func. Otherwise,
GDB is called from line 774, but longjmp'ing at that point leaves
rl_dispatching and RL_STATE_DISPATCHING set.
Fix this by wrapping tui_rl_switch_mode in a TRY_CATCH.
gdb/
2014-10-29 Pedro Alves <palves@redhat.com>
* tui/tui.c (tui_rl_switch_mode): Wrap tui_enable/tui_disable in
TRY_CATCH.
PR tui/16138 is about failure to initialize curses resulting in GDB
exiting instead of throwing an error. E.g.:
$ TERM=foo gdb
(gdb) layout asm
Error opening terminal: foo.
$
The problem is that we're calling initscr to initialize the screen.
As mentioned in
http://pubs.opengroup.org/onlinepubs/7908799/xcurses/initscr.html:
If errors occur, initscr() writes an appropriate error message to
standard error and exits.
^^^^^
Instead, we should use newterm:
"A program that needs an indication of error conditions, so it can
continue to run in a line-oriented mode if the terminal cannot support
a screen-oriented program, would also use this function."
After the patch:
$ TERM=foo gdb -q -nx
(gdb) layout asm
Cannot enable the TUI: error opening terminal [TERM=foo]
(gdb)
And then PR tui/17519 is about GDB not validating whether the terminal
has the necessary capabilities when enabling the TUI. If one tries to
enable the TUI with TERM=dumb (and e.g., from a shell within emacs),
GDB ends up with a clear screen, the cursor is placed at the
bottom/right corner of the screen, there's no prompt, typing shows no
echo, and there's no indication of what's going on. c-x,a gets you
out of the TUI, but it's completely non-obvious.
After the patch, we get:
$ TERM=dumb gdb -q -nx
(gdb) layout asm
Cannot enable the TUI: terminal doesn't support cursor addressing [TERM=dumb]
(gdb)
While at it, I've moved all the tui_allowed_p validation to
tui_enable, and expanded the error messages. Previously we'd get:
$ gdb -q -nx -i=mi
(gdb)
layout asm
&"layout asm\n"
&"TUI mode not allowed\n"
^error,msg="TUI mode not allowed"
and:
$ gdb -q -nx -ex "layout asm" > foo
TUI mode not allowed
While now we get:
$ gdb -q -nx -i=mi
(gdb)
layout asm
&"layout asm\n"
&"Cannot enable the TUI when the interpreter is 'mi'\n"
^error,msg="Cannot enable the TUI when the interpreter is 'mi'"
(gdb)
and:
$ gdb -q -nx -ex "layout asm" > foo
Cannot enable the TUI when output is not a terminal
Tested on x86_64 Fedora 20.
gdb/
2014-10-29 Pedro Alves <palves@redhat.com>
PR tui/16138
PR tui/17519
* tui/tui-interp.c (tui_is_toplevel): Delete global.
(tui_allowed_p): Delete function.
* tui/tui.c: Include "interps.h".
(tui_enable): Don't use tui_allowed_p. Error out here with
detailed error messages if the TUI is the top level interpreter,
or if output is not a terminal. Use newterm instead of initscr,
and error out if initializing the terminal fails. Also error out if
the terminal doesn't support cursor addressing.
* tui/tui.h (tui_allowed_p): Delete declaration.
tui_initialize_io contains a pair of hardwired fprintf/exit error
handlers. I was unable to find any documentation as to why they're
hardwired (the code appeared in a monolithic block back in 2001:
https://sourceware.org/ml/gdb-patches/2001-07/msg00490.html) and I
was also unable to come up with a situation where error would not
be suitable, so I have replaced both handlers with calls to error.
gdb/ChangeLog:
* tui/tui-io.c (tui_initialize_io): Replace two fprintf/exit
pairs with calls to error. Wrap the message with _().
The TUI terminal state becomes corrupted (e.g. key sequences such as
Alt_F and Alt_B no longer work) when one attaches to an inferior process
(via "run" or "attach") from within TUI. This terminal corruption
remains until you switch out of TUI mode.
This happens because the terminal state is not properly saved when
switching to and out from TUI mode. Although the functions tui_enable()
and tui_disable() both call the function target_terminal_save_ours() to
save the terminal state, this function is a no-op unless GDB has already
attached to an inferior process. This is because only the "native"
target has a useful implementation of target_terminal_save_ours()
(namely child_terminal_save_ours()) and we only have the "native" target
in our target vector if GDB has already attached to an inferior process.
So without an inferior process, switching to and from TUI mode does not
actually save the terminal state. Therefore when you attach to an
inferior process from within TUI mode, the proper terminal state is not
restored (after swapping from the inferior's terminal back to the GDB
terminal).
To fix this we just have to ensure that the terminal state is always
being properly saved when switching from and to TUI mode. To achieve
this, this patch removes the polymorphic function
target_terminal_save_ours() and replaces it with a regular function
gdb_save_tty_state() that always saves the terminal state.
Tested on x86_64-unknown-linux-gnu by running "make check", no new
regressions.
gdb/ChangeLog:
* target.h (struct target_ops::to_terminal_save_ours): Remove
declaration.
(target_terminal_save_ours): Remove macro.
* target-delegates.c: Regenerate.
* inf-child.c (inf_child_target): Don't set the nonexistent
field to_terminal_save_ours.
* inferior.h (child_terminal_save_ours): Remove declaration.
* terminal.h (gdb_save_tty_state): New declaration.
* inflow.c (child_terminal_save_ours): Rename to ...
(gdb_save_tty_state): ... this.
* tui/tui.c: Include terminal.h.
(tui_enable): Use gdb_save_tty_state instead of
target_terminal_save_ours.
(tui_disable): Likewise.
The TUI currently crashes when the user types <return> in response to
a pagination prompt:
$ gdb --tui ...
*the TUI is now active*
(gdb) set height 2
(gdb) help
List of classes of commands:
Program received signal SIGSEGV, Segmentation fault.
strlen () at ../sysdeps/x86_64/strlen.S:106
106 movdqu (%rax), %xmm12
(top-gdb) bt
#0 strlen () at ../sysdeps/x86_64/strlen.S:106
#1 0x000000000086be5f in xstrdup (s=0x0) at ../src/libiberty/xstrdup.c:33
#2 0x00000000005163f9 in tui_prep_terminal (notused1=1) at ../src/gdb/tui/tui-io.c:296
#3 0x000000000077a7ee in _rl_callback_newline () at ../src/readline/callback.c:82
#4 0x000000000077a853 in rl_callback_handler_install (prompt=0x0, linefunc=0x618b60 <command_line_handler>) at ../src/readline/callback.c:102
#5 0x0000000000718a5c in gdb_readline_wrapper_cleanup (arg=0xfd14d0) at ../src/gdb/top.c:788
#6 0x0000000000596d08 in do_my_cleanups (pmy_chain=0xcf0b38 <cleanup_chain>, old_chain=0x1043d10) at ../src/gdb/cleanups.c:155
#7 0x0000000000596d75 in do_cleanups (old_chain=0x1043d10) at ../src/gdb/cleanups.c:177
#8 0x0000000000718bd9 in gdb_readline_wrapper (prompt=0x7fffffffcfa0 "---Type <return> to continue, or q <return> to quit---")
at ../src/gdb/top.c:835
#9 0x000000000071cf74 in prompt_for_continue () at ../src/gdb/utils.c:1894
#10 0x000000000071d434 in fputs_maybe_filtered (linebuffer=0x1043db0 "List of classes of commands:\n\n", stream=0xf72e20, filter=1)
at ../src/gdb/utils.c:2111
#11 0x000000000071da0f in vfprintf_maybe_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118, filter=1)
at ../src/gdb/utils.c:2339
#12 0x000000000071da4a in vfprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118)
at ../src/gdb/utils.c:2347
#13 0x000000000071dc72 in fprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n") at ../src/gdb/utils.c:2399
#14 0x00000000004f90ab in help_list (list=0xe6d100, cmdtype=0x89ad8c "", class=all_classes, stream=0xf72e20)
at ../src/gdb/cli/cli-decode.c:1038
#15 0x00000000004f8dba in help_cmd (arg=0x0, stream=0xf72e20) at ../src/gdb/cli/cli-decode.c:946
Git 0017922 added:
@@ -776,6 +777,12 @@ gdb_readline_wrapper_cleanup (void *arg)
gdb_assert (input_handler == gdb_readline_wrapper_line);
input_handler = cleanup->handler_orig;
+
+ /* Reinstall INPUT_HANDLER in readline, without displaying a
+ prompt. */
+ if (async_command_editing_p)
+ rl_callback_handler_install (NULL, input_handler);
and tui_prep_terminal simply misses handling the case of a NULL
rl_prompt.
I also checked that readline's sources do similar checks.
gdb/
2014-07-24 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_prep_terminal): Handle NULL rl_prompt.
I have filed now:
--with-system-readline uses bundled readline include files
https://sourceware.org/bugzilla/show_bug.cgi?id=17077
To see any effect of the patch below you have to do:
rm -rf readline
Otherwise readline include files get used the bundled ones from GDB which are
currently 6.2 while system readline may be 6.3 already.
You also have to use system readline-6.3 including its upstream patch:
[Bug-readline] Readline-6.3 Official Patch 5
http://lists.gnu.org/archive/html/bug-readline/2014-04/msg00018.html
Message-ID: <140415125618.AA57598.SM@caleb.ins.cwru.edu>
In short it happens on Fedora Rawhide since:
readline-6.3-1.fc21
https://koji.fedoraproject.org/koji/buildinfo?buildID=538941
The error is:
../../gdb/tui/tui-io.c:132:1: error: 'Function' is deprecated [-Werror=deprecated-declarations]
static Function *tui_old_rl_getc_function;
^
../../gdb/tui/tui-io.c:133:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_redisplay_function;
^
../../gdb/tui/tui-io.c:134:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_prep_terminal;
^
../../gdb/tui/tui-io.c:135:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_deprep_terminal;
^
It is since bash change:
lib/readline/rltypedefs.h
- remove old Function/VFunction/CPFunction/CPPFunction typedefs as
suggested by Tom Tromey <tromey@redhat.com>
The new typedefs used below are present in readline/rltypedefs.h since:
git://git.savannah.gnu.org/bash.git
commit 28ef6c316f1aff914bb95ac09787a3c83c1815fd
Date: Fri Apr 6 19:14:31 2001 +0000
gdb/
2014-06-20 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix --with-system-readline with readline-6.3 patch 5.
* tui/tui-io.c (tui_old_rl_getc_function, tui_old_rl_redisplay_function)
(tui_old_rl_prep_terminal, tui_old_rl_deprep_terminal): Use rl_*_t
types.
Message-ID: <20140620105004.GA22236@host2.jankratochvil.net>
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
Enabling target-async by default will require implementing sync
execution on top of an async target, much like foreground command are
implemented on the CLI in async mode.
In order to do that, we will need better control of when to print the
MI prompt. Currently the interp->display_prompt_p hook is all we
have, and MI just always returns false, meaning, make
display_gdb_prompt a no-op. We'll need to be able to know to print
the MI prompt in some of the conditions that display_gdb_prompt is
called from the core, but not all.
This is all a litte twisted currently. As we can see,
display_gdb_prompt is really CLI specific, so make the console
interpreters (console/tui) themselves call it. To be able to do that,
and add a few different observers that the interpreters can use to
distinguish when or why the the prompt is being printed:
#1 - one called whenever a command is cancelled due to an error.
#2 - another for when a foreground command just finished.
In both cases, CLI wants to print the prompt, while MI doesn't.
MI will want to print the prompt in the second case when in a special
MI mode.
The display_gdb_prompt call in interp_set made me pause. The comment
there reads:
/* Finally, put up the new prompt to show that we are indeed here.
Also, display_gdb_prompt for the console does some readline magic
which is needed for the console interpreter, at least... */
But, that looks very much like a no-op to me currently:
- the MI interpreter always return false in the prompt hook, meaning
actually display no prompt.
- the interpreter used at that point is still quiet. And the
console/tui interpreters return false in the prompt hook if they're
quiet, meaning actually display no prompt.
The only remaining possible use would then be the readline magic. But
whatever that might have been, it's not reacheable today either,
because display_gdb_prompt returns early, before touching readline if
the interpreter returns false in the display_prompt_p hook.
Tested on x86_64 Fedora 20, sync and async modes.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete.
(_initialize_cli_interp): Adjust.
* event-loop.c: Include "observer.h".
(start_event_loop): Notify 'command_error' observers instead of
calling display_gdb_prompt. Remove FIXME comment.
* event-top.c (display_gdb_prompt): Remove call into the
interpreters.
* inf-loop.c: Include "observer.h".
(inferior_event_handler): Notify 'command_error' observers instead
of calling display_gdb_prompt.
* infrun.c (fetch_inferior_event): Notify 'sync_execution_done'
observers instead of calling display_gdb_prompt.
* interps.c (interp_set): Don't call display_gdb_prompt.
(current_interp_display_prompt_p): Delete.
* interps.h (interp_prompt_p): Delete declaration.
(interp_prompt_p_ftype): Delete.
(struct interp_procs) <prompt_proc_p>: Delete field.
(current_interp_display_prompt_p): Delete declaration.
* mi-interp.c (mi_interpreter_prompt_p): Delete.
(_initialize_mi_interp): Adjust.
* tui-interp.c (tui_init): Install 'sync_execution_done' and
'command_error' observers.
(tui_on_sync_execution_done, tui_on_command_error): New
functions.
(tui_display_prompt_p): Delete.
(_initialize_tui_interp): Adjust.
gdb/doc/
2014-05-29 Pedro Alves <palves@redhat.com>
* observer.texi (sync_execution_done, command_error): New
subjects.
Ignoring expected and desired differences like whether the prompt is
output after *stoppped records, GDB MI output is still different in
sync and async modes.
In sync mode, when a CLI execution command is entered, the "reason"
field is missing in the *stopped async record. And in async mode, for
some events, like program exits, the corresponding CLI output is
missing in the CLI channel.
Vis, diff between sync vs async modes:
run
^running
*running,thread-id="1"
(gdb)
...
- ~"[Inferior 1 (process 15882) exited normally]\n"
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
- *stopped
+ *stopped,reason="exited-normally"
si
...
(gdb)
~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n"
- *stopped,frame=...,thread-id="1",stopped-threads="all",core="0"
+ *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0"
(gdb)
In addition, in both cases, when a MI execution command is entered,
and a breakpoint triggers, the event is sent to the console too. But
some events like program exits have the CLI output missing in the CLI
channel:
-exec-run
^running
*running,thread-id="1"
(gdb)
...
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
- *stopped
+ *stopped,reason="exited-normally"
We'll want to make background commands always possible by default.
IOW, make target-async be the default. But, in order to do that,
we'll need to emulate MI sync on top of an async target. That means
we'll have yet another combination to care for in the testsuite.
Rather than making the testsuite cope with all these differences, I
thought it better to just fix GDB to always have the complete output,
no matter whether it's in sync or async mode.
This is all related to interpreter-exec, and the corresponding uiout
switching. (Typing a CLI command directly in MI is shorthand for
running it through -interpreter-exec console.)
In sync mode, when a CLI command is active, normal_stop is called when
the current interpreter and uiout are CLI's. So print_XXX_reason
prints the stop reason to CLI uiout (only), and we don't show it in
MI.
In async mode the stop event is processed when we're back in the MI
interpreter, so the stop reason is printed directly to the MI uiout.
Fix this by making run control event printing roughly independent of
whatever is the current interpreter or uiout. That is, move these
prints to interpreter observers, that know whether to print or be
quiet, and if printing, which uiout to print to. In the case of the
console/tui interpreters, only print if the top interpreter. For MI,
always print.
Breakpoint hits / normal stops are already handled similarly -- MI has
a normal_stop observer that prints the event to both MI and the CLI,
though that could be cleaned up further in the direction of this
patch.
This also makes all of:
(gdb) foo
and
(gdb) interpreter-exec MI "-exec-foo"
and
(gdb)
-exec-foo
and
(gdb)
-interpreter-exec console "foo"
print as expected.
Tested on x86_64 Fedora 20, sync and async modes.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* cli/cli-interp.c: Include infrun.h and observer.h.
(cli_uiout, cli_interp): New globals.
(cli_on_signal_received, cli_on_end_stepping_range)
(cli_on_signal_exited, cli_on_exited, cli_on_no_history): New
functions.
(cli_interpreter_init): Install them as 'end_stepping_range',
'signal_received' 'signal_exited', 'exited' and 'no_history'
observers.
(_initialize_cli_interp): Remove cli_interp local.
* infrun.c (handle_inferior_event): Call the several stop reason
observers instead of printing the stop reason directly.
(end_stepping_range): New function.
(print_end_stepping_range_reason, print_signal_exited_reason)
(print_exited_reason, print_signal_received_reason)
(print_no_history_reason): Make static, and add an uiout
parameter. Print to that instead of to CURRENT_UIOUT.
* infrun.h (print_end_stepping_range_reason)
(print_signal_exited_reason, print_exited_reason)
(print_signal_received_reason print_no_history_reason): New
declarations.
* mi/mi-common.h (struct mi_interp): Rename 'uiout' field to
'mi_uiout'.
<cli_uiout>: New field.
* mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new
uiout for CLI output. Install 'signal_received',
'end_stepping_range', 'signal_exited', 'exited' and 'no_history'
observers.
(find_mi_interpreter, mi_interp_data, mi_on_signal_received)
(mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
(mi_on_no_history): New functions.
(ui_out_free_cleanup): Delete function.
(mi_on_normal_stop): Don't allocate a new uiout for CLI output,
instead use the one already stored in the MI interpreter data.
(mi_ui_out): Adjust.
* tui/tui-interp.c: Include infrun.h and observer.h.
(tui_interp): New global.
(tui_on_signal_received, tui_on_end_stepping_range)
(tui_on_signal_exited, tui_on_exited)
(tui_on_no_history): New functions.
(tui_init): Install them as 'end_stepping_range',
'signal_received' 'signal_exited', 'exited' and 'no_history'
observers.
(_initialize_tui_interp): Delete tui_interp local.
gdb/doc/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* observer.texi (signal_received, end_stepping_range)
(signal_exited, exited, no_history): New observer subjects.
gdb/testsuite/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
reason, even in sync mode.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html
gdb/ChangeLog
* cli/cli-interp.c (_initialize_cli_interp): Add a
command_loop_proc to interp_procs.
* event-top.c (cli_command_loop): Change signature to match
interp_command_loop_ftype.
* event-top.h (cli_command_loop): Same.
* interps.c (interp_new): Require every interpreter to have a
command_loop_proc.
(current_interp_command_loop): Just call the command_loop_proc on
the current interpreter.
* tui/tui-interp.c (_initialize_tui_interp): Add a
command_loop_proc to interp_procs.
I stumbled on the TUI's register-changed decision code before (used to
decided whether the register should be highlighted in the register
window), for it is trying to compare all the different possible states
and contents or previous/current register contents, and as such may
need updating whenever the value machinery changes to have more state.
It's just much simpler and more future proof to compare the
previous/current printable representation instead.
The bit in tui_register_format that returns early if the register has
no name gets a bit in the way of the new prototype (what to return in
that case? NULL, empty string, etc.?). Fortunately, that check isn't
really necessary. All the callers will have already skipped unnamed
registers.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* tui/tui-regs.c (tui_register_format): Don't look at the
register's name here. Return string representing register
value instead of storing it in the data element.
(tui_get_register): Compare register string representations
instead of register value states and contents.
I've stumbled on this by inspection.
When the TUI's register window is first displayed, it always shows the
registers of the current frame, instead of of the selected frame,
which is obviously bogus.
E.g.,
(gdb) step # into "function"
(gdb) up
(gdb) tui reg general # or C-x 2, C-x 2
shows the registers of "function", rather than the caller's.
A subsequent:
(gdb) frame
or
(gdb) down
(gdb) up
can be used as workaround to "fix" it.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
PR tui/15933
* tui/tui-regs.c (tui_show_registers): Show registers of the
selected frame, not the current frame.
PR tui/14880 shows a reproducer that triggers this assertion:
int
value_available_contents_eq (const struct value *val1, int offset1,
const struct value *val2, int offset2,
int length)
{
int idx1 = 0, idx2 = 0;
/* This routine is used by printing routines, where we should
already have read the value. Note that we only know whether a
value chunk is available if we've tried to read it. */
gdb_assert (!val1->lazy && !val2->lazy);
(top-gdb) bt
#0 internal_error (file=0x88a26c "../../src/gdb/value.c", line=549, string=0x88a220 "%s: Assertion `%s' failed.") at ../../src/gdb/utils.c:844
#1 0x000000000057b9cd in value_available_contents_eq (val1=0x10fa900, offset1=0, val2=0x10f9e10, offset2=0, length=8) at ../../src/gdb/value.c:549
#2 0x00000000004fd756 in tui_get_register (frame=0xd5c430, data=0x109a548, regnum=0, changedp=0x109a560) at ../../src/gdb/tui/tui-regs.c:736
#3 0x00000000004fd111 in tui_check_register_values (frame=0xd5c430) at ../../src/gdb/tui/tui-regs.c:521
#4 0x0000000000501884 in tui_check_data_values (frame=0xd5c430) at ../../src/gdb/tui/tui-windata.c:234
#5 0x00000000004f976f in tui_selected_frame_level_changed_hook (level=1) at ../../src/gdb/tui/tui-hooks.c:222
#6 0x00000000006f0681 in select_frame (fi=0xd5c430) at ../../src/gdb/frame.c:1490
#7 0x00000000005dd94b in up_silently_base (count_exp=0x0) at ../../src/gdb/stack.c:2268
#8 0x00000000005dd985 in up_command (count_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2280
#9 0x00000000004dc5cf in do_cfunc (c=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:113
#10 0x00000000004df664 in cmd_func (cmd=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:1888
#11 0x00000000006e43e1 in execute_command (p=0xc7e6c2 "", from_tty=1) at ../../src/gdb/top.c:489
The fix is to fetch the value before comparing the contents. The
comment additions to value.h explain why it can't be
value_available_contents_eq itself that fetches the contents.
Tested on x86_64 Fedora 17.
gdb/
2013-06-28 Pedro Alves <palves@redhat.com>
PR tui/14880
* tui/tui-regs.c (tui_get_register): Fetch register value contents
before checking whether they're available.
* value.c (value_available_contents_eq): Change comment.
* value.h (value_available_contents_eq): Expand comment.
* source.c (print_source_lines_base): Print for TUI also "fullname".
* tui/tui-data.c (init_content_element): Change tui_locator_element
field to full_name.
* tui/tui-data.h (struct tui_locator_element): Likewise.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
tui_update_locator_filename calls to tui_update_locator_fullname.
Replace symtab->filename refererence by symtab_to_fullname call.
* tui/tui-out.c (tui_field_string): Check for "fullname" now.
* tui/tui-source.c (tui_set_source_content): Change tui_locator_element
field to full_name. Replace symtab->filename refererence by
symtab_to_fullname call.
(tui_show_symtab_source): Rename parameter to fullname. Change
tui_locator_element field to full_name.
* tui/tui-stack.c: Include source.h.
(tui_set_locator_filename): Rename the declaration to ...
(tui_set_locator_fullname): ... here. Rename its parameter to
fullname, updates its comment.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_filename): Rename the definition to ...
(tui_set_locator_fullname): ... here. Rename its parameter to
fullname, updates its comment. Change tui_locator_element field to
full_name.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_info): Rename callee to tui_set_locator_fullname.
(tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here. Rename callee to
tui_set_locator_fullname.
(tui_show_frame_info): Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui-stack.h (tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here.
* tui/tui-winsource.c (tui_display_main): Rename the callee to
tui_update_locator_fullname. Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui.c (tui_show_source): Rename its parameter to fullname.
Rename the callee to tui_update_locator_fullname.
* tui/tui.h (tui_show_source): Rename its parameter to fullname.
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it. Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *. Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable. Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname. Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename. Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls. New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *. New
variable s_filename. Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname. Use it. Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename. Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.
* tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
Rename field reference filename to fullname.
* tui/tui-data.h (struct tui_source_info): Rename field filename to
fullname. New comment for it.
* tui/tui-source.c (tui_set_source_content): Rename field reference
filename to fullname. Initialize field by symtab_to_fullname now.
* tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
reference filename to fullname. Use symtab_to_fullname during
comparison.
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references. Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Code cleanup.
* dwarf2read.c (fixup_go_packaging): Do not check symtab->FILENAME for
NULL.
* linespec.c (add_sal_to_sals): Likewise.
* psympriv.h (allocate_psymtab): Add ATTRIBUTE_NONNULL.
* stack.c (print_frame): Do not check symtab->FILENAME for NULL.
* symfile.h (allocate_symtab): Add ATTRIBUTE_NONNULL.
* symtab.h (struct symtab): Add comment it is never NULL for filename.
* tracepoint.c (set_traceframe_context): Do not check symtab->FILENAME
for NULL.
* tui/tui-source.c (tui_set_source_content): Likewise.
while executing the gdb command.
(tui_rl_startup_hook): Do not switch back to TUI_SINGLE_KEY_MODE if we
are called from prompt_for_continue.
* tui/tui-io.c (tui_redisplay_readline): Likewise.
* procfs.c (procfs_make_note_section): Be sure to NUL-terminate
fname and psargs before trying to concatenate.
* tui/tui-stack.c (tui_get_function_from_frame): NUL-terminate
"name" before applying strchr.
2011-09-12 Pedro Alves <pedro@codesourcery.com>
Matt Rice <ratmice@gmail.com>
PR gdb/13175
* interps.c (struct interp) <interpreter_out>: Delete field.
(interp_new): Remove the data and uiout parameters and adjust.
(interp_set): Only set the current_uiout from the interpreter's
uiout after initializing the interpreter. Adjust call to
init_proc.
(interp_ui_out): Adjust to call procs->ui_out_proc.
(interp_data, interp_name): New.
* interps.h (interp_init_ftype): Add `self' parameter.
(interp_ui_out_ftype): New typedef.
(struct interp_procs) <ui_out_proc>: New method pointer.
(interp_new): Remove the data and uiout parameters.
(interp_data, interp_name): Declare.
* tui/tui-interp.c (tui_init): Adjust prototype.
(tui_ui_out): New.
(_initialize_tui_interp): Install tui_ui_out. Don't instanciate
tui_out here. Adjust call to interp_new.
* tui/tui-io.c (tui_initialize_io): Don't set current_uiout here.
* cli/cli-interp.c (cli_interpreter_init): Adjust prototype.
(cli_ui_out): New.
(_initialize_cli_interp): Install it. Adjust call to interp_new.
* mi/mi-common.h (struct mi_interp) <uiout>: New field.
* mi/mi-interp.c (mi_interpreter_init): Adjust prototype.
Initialize mi->uiout depending on the mi_version as extracted from
the interpreter's name.
(mi_ui_out): New.
(_initialize_mi_interp): Install mi_ui_out. Adjust calls to
interp_new. Don't allocate the ui_out's of the interpreters here.
gdb/testsuite/
2011-09-12 Matt Rice <ratmice@gmail.com>
Pedro Alves <pedro@codesourcery.com>
PR gdb/13175
* gdb.base/interp.exp: New tests.
* gdb.base/interp.c: New file.
PR tui/13073
gdb/
* tui/tui-regs.c (tui_show_register_group): Skip registers with an
empty name.
(tui_show_register_group): Don't store a byte buffer in the data
element's value.
(tui_register_format): Skip registers with an empty name.
(tui_get_register): Store a struct value in the data element's
value field instead of a byte buffer holding the raw register
contents. Account for optimized-out and unavailable registers
when comparing register contents.