This patch implements follow-fork for vfork on extended-remote Linux targets.
The implementation follows the native implementation as much as possible.
Most of the work is done on the GDB side in the existing code now in
infrun.c. GDBserver just has to report the events and do a little
bookkeeping.
Implementation includes:
* enabling VFORK events by adding ptrace options for VFORK and VFORK_DONE
to linux-low.c:linux_low_ptrace_options.
* handling VFORK and VFORK_DONE events in linux-low.c:handle_extended_wait
and reporting them to GDB.
* including VFORK and VFORK_DONE events in the predicate
linux-low.c:extended_event_reported.
* adding support for VFORK and VFORK_DONE events in RSP by adding stop
reasons "vfork" and "vforkdone" to the 'T' Stop Reply Packet in both
gdbserver/remote-utils.c and gdb/remote.c.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Handle PTRACE_EVENT_FORK and
PTRACE_EVENT_VFORK_DONE.
(linux_low_ptrace_options, extended_event_reported): Add vfork
events.
* remote-utils.c (prepare_resume_reply): New stop reasons "vfork"
and "vforkdone" for RSP 'T' Stop Reply Packet.
* server.h (report_vfork_events): Declare
global variable.
gdb/ChangeLog:
* remote.c (remove_vfork_event_p): New function.
(remote_follow_fork): Add vfork event type to event checking.
(remote_parse_stop_reply): New stop reasons "vfork" and
"vforkdone" for RSP 'T' Stop Reply Packet.
This patch implements basic support for follow-fork and detach-on-fork on
extended-remote Linux targets. Only 'fork' is supported in this patch;
'vfork' support is added n a subsequent patch. This patch depends on
the previous patches in the patch series.
Sufficient extended-remote functionality has been implemented here to pass
gdb.base/multi-forks.exp, as well as gdb.base/foll-fork.exp with the
catchpoint tests commented out. Some other fork tests fail with this
patch because it doesn't provide the architecture support needed for
watchpoint inheritance or fork catchpoints.
The implementation follows the same general structure as for the native
implementation as much as possible.
This implementation includes:
* enabling fork events in linux-low.c in initialize_low and
linux_enable_extended_features
* handling fork events in gdbserver/linux-low.c:handle_extended_wait
- when a fork event occurs in gdbserver, we must do the full creation
of the new process, thread, lwp, and breakpoint lists. This is
required whether or not the new child is destined to be
detached-on-fork, because GDB will make target calls that require all
the structures. In particular we need the breakpoint lists in order
to remove the breakpoints from a detaching child. If we are not
detaching the child we will need all these structures anyway.
- as part of this event handling we store the target_waitstatus in a new
member of the parent lwp_info structure, 'waitstatus'. This
is used to store extended event information for reporting to GDB.
- handle_extended_wait is given a return value, denoting whether the
handled event should be reported to GDB. Previously it had only
handled clone events, which were never reported.
* using a new predicate in gdbserver to control handling of the fork event
(and eventually all extended events) in linux_wait_1. The predicate,
extended_event_reported, checks a target_waitstatus.kind for an
extended ptrace event.
* implementing a new RSP 'T' Stop Reply Packet stop reason: "fork", in
gdbserver/remote-utils.c and remote.c.
* implementing new target and RSP support for target_follow_fork with
target extended-remote. (The RSP components were actually defined in
patch 1, but they see their first use here).
- remote target routine remote_follow_fork, which just sends the 'D;pid'
detach packet to detach the new fork child cleanly. We can't just
call target_detach because the data structures for the forked child
have not been allocated on the host side.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Implement return value,
rename argument 'event_child' to 'event_lwp', handle
PTRACE_EVENT_FORK, call internal_error for unrecognized event.
(linux_low_ptrace_options): New function.
(linux_low_filter_event): Call linux_low_ptrace_options,
use different argument fo linux_enable_event_reporting,
use return value from handle_extended_wait.
(extended_event_reported): New function.
(linux_wait_1): Call extended_event_reported and set
status to report fork events.
(linux_write_memory): Add pid to debug message.
(reset_lwp_ptrace_options_callback): New function.
(linux_handle_new_gdb_connection): New function.
(linux_target_ops): Initialize new structure member.
* linux-low.h (struct lwp_info) <waitstatus>: New member.
* lynx-low.c: Initialize new structure member.
* remote-utils.c (prepare_resume_reply): Implement stop reason
"fork" for "T" stop message.
* server.c (handle_query): Call handle_new_gdb_connection.
* server.h (report_fork_events): Declare global flag.
* target.h (struct target_ops) <handle_new_gdb_connection>:
New member.
(target_handle_new_gdb_connection): New macro.
* win32-low.c: Initialize new structure member.
gdb/ChangeLog:
* linux-nat.c (linux_nat_ptrace_options): New function.
(linux_init_ptrace, wait_lwp, linux_nat_filter_event):
Call linux_nat_ptrace_options and use different argument to
linux_enable_event_reporting.
(_initialize_linux_nat): Delete call to
linux_ptrace_set_additional_flags.
* nat/linux-ptrace.c (current_ptrace_options): Rename to
supported_ptrace_options.
(additional_flags): Delete variable.
(linux_check_ptrace_features): Use supported_ptrace_options.
(linux_test_for_tracesysgood, linux_test_for_tracefork):
Likewise, and remove additional_flags check.
(linux_enable_event_reporting): Change 'attached' argument to
'options'. Use supported_ptrace_options.
(ptrace_supports_feature): Change comment. Use
supported_ptrace_options.
(linux_ptrace_set_additional_flags): Delete function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Delete function prototype.
* remote.c (remote_fork_event_p): New function.
(remote_detach_pid): New function.
(remote_detach_1): Call remote_detach_pid, don't mourn inferior
if doing detach-on-fork.
(remote_follow_fork): New function.
(remote_parse_stop_reply): Handle new "T" stop reason "fork".
(remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
(init_extended_remote_ops): Initialize to_follow_fork.
This patch teaches the core of gdbserver about the new "swbreak" and
"hwbreak" stop reasons, and adds the necessary hooks a backend needs
to implement to support the feature.
gdb/gdbserver/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* remote-utils.c (prepare_resume_reply): Report swbreak/hbreak.
* server.c (swbreak_feature, hwbreak_feature): New globals.
(handle_query) <qSupported>: Handle "swbreak+" and "hwbreak+".
(captured_main): Clear swbreak_feature and hwbreak_feature.
* server.h (swbreak_feature, hwbreak_feature): Declare.
* target.h (struct target_ops) <stopped_by_sw_breakpoint,
supports_stopped_by_sw_breakpoint, stopped_by_hw_breakpoint,
supports_stopped_by_hw_breakpoint>: New fields.
(target_supports_stopped_by_sw_breakpoint)
(target_stopped_by_sw_breakpoint)
(target_supports_stopped_by_hw_breakpoint)
(target_stopped_by_hw_breakpoint): Declare.
Since gnulib alloca module was imported, we can include alloca.h in
both gdb and gdbserver unconditionally, so this patch adds inclusion
of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA
in configure.ac because we don't need to check alloca any more.
This patch below is removed in fact.
[RFA/commit] include alloca.h if available.
https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html
Since alloca.h is from gnulib now, we don't have to check malloc.h in
configure and include malloc.h in code. This patch also remove them
too.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* common/common-defs.h: Include alloca.h
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
* configure: Re-generated.
* defs.h: Remove code handling alloca.
* utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined
or not.
gdb/gdbserver:
2014-11-21 Yao Qi <yao@codesourcery.com>
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
(AC_CHECK_HEADERS): Remove malloc.h.
* configure: Re-generated.
* config.in: Re-generated.
* server.h: Don't include alloca.h and malloc.h.
* gdbreplay.c: Don't check HAVE_ALLOCA_H is defined.
Don't include malloc.h.
This commit includes common-exceptions.h in common-defs.h and removes
all other inclusions.
gdb/ChangeLog:
* common/common-defs.h: Include common-exceptions.h.
* exceptions.h: Do not include common-exceptions.h.
gdb/gdbserver/ChangeLog:
* server.h: Do not include common-exceptions.h.
This commit includes cleanups.h in common-defs.h and removes all other
inclusions.
gdb/ChangeLog:
* common/common-defs.h: Include cleanups.h.
* common/common-exceptions.c: Do not include cleanups.h.
* utils.h: Likewise.
gdb/gdbserver/ChangeLog:
* server.h: Do not include cleanups.h.
This commit adds a new global flag show_debug_regs to common-debug.h
to replace the flag debug_hw_points used by gdbserver and by the
Linux x86 and AArch64 ports, and to replace the flag maint_show_dr
used by the Linux MIPS port.
Note that some debug printing in the AArch64 port was enabled only if
debug_hw_points > 1 but no way to set debug_hw_points to values other
than 0 and 1 was provided; that code was effectively dead. This
commit enables all debug printing if show_debug_regs is nonzero, so
the AArch64 output will be more verbose than previously.
gdb/ChangeLog:
* common/common-debug.h (show_debug_regs): Declare.
* common/common-debug.c (show_debug_regs): Define.
* aarch64-linux-nat.c (debug_hw_points): Don't define. Replace
all uses with show_debug_regs. Replace all uses that considered
debug_hw_points as a multi-value integer with straight boolean
uses.
* x86-nat.c (debug_hw_points): Don't define. Replace all uses
with show_debug_regs.
* nat/x86-dregs.c (debug_hw_points): Don't declare. Replace
all uses with show_debug_regs.
* mips-linux-nat.c (maint_show_dr): Don't define. Replace all
uses with show_debug_regs.
gdb/gdbserver/ChangeLog:
* server.h (debug_hw_points): Don't declare.
* server.c (debug_hw_points): Don't define. Replace all uses
with show_debug_regs.
* linux-aarch64-low.c (debug_hw_points): Don't define. Replace
all uses with show_debug_regs.
This commit replaces the hacky "exception" system in gdbserver with
the exceptions and cleanups subsystem from GDB.
Only the catch/cleanup code in what was "main" has been updated to
use the new system. Other parts of gdbserver can now be converted
to use TRY_CATCH and cleanups on an as-needed basis.
A side-effect of this commit is that some error messages will change
slightly, and in cases with multiple errors the error messages will
be printed in a different order.
gdb/gdbserver/ChangeLog:
* server.h (setjmp.h): Do not include.
(toplevel): Do not declare.
(common-exceptions.h): Include.
(cleanups.h): Likewise.
* server.c (toplevel): Do not define.
(exit_code): New static global.
(detach_or_kill_for_exit_cleanup): New function.
(main): New function. Original main renamed to...
(captured_main): New function.
* utils.c (verror) [!IN_PROCESS_AGENT]: Use throw_verror.
This introduces common-types.h. This file defines various standard
types used by gdb and gdbserver.
Currently these types are conditionally defined based on GDBSERVER.
The long term goal is to remove all such tests; however, this is
difficult as currently gdb uses definitions from BFD. In the meantime
this is still a step in the right direction.
gdb/ChangeLog:
* common/common-types.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h.
* common/common-defs.h: Include common-types.h.
* defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST)
(ULONGEST): Remove.
gdb/gdbserver/ChangeLog:
* server.h: Add static assertion.
(gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Remove.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
This commit moves the inclusion of common-utils.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include common-utils.h.
* defs.h: Do not include common-utils.h.
* common/gdb_assert.h: Likewise.
* darwin-nat.h: Likewise.
* nat/linux-btrace.c: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include common-utils.h.
This commit moves the inclusion of ptid.h to common-defs.h and removes
all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ptid.h.
* defs.h: Do not include ptid.h.
* inferior.h: Likewise.
* infrun.h: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.h: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ptid.h.
* notif.h: Likewise.
This commit moves the inclusion of gdb_locale.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_locale.h.
* defs.h: Do not include gdb_locale.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_locale.h.
This commit moves the inclusion of gdb/signals.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb/signals.h.
* defs.h: Do not include gdb/signals.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb/signals.h.
* win32-low.c: Likewise.
This commit moves the inclusion of pathmax.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include pathmax.h.
* defs.h: Do not include pathmax.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include pathmax.h.
This commit moves the inclusion of libiberty.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include libiberty.h.
* defs.h: Do not include libiberty.h.
* common/queue.h: Likewise.
* cp-name-parser.y: Likewise.
* mi/mi-cmd-catch.c: Likewise.
* python/python.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include libiberty.h.
* linux-bfin-low.c: Likewise.
This commit moves the inclusion of ansidecl.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ansidecl.h.
* defs.h: Do not include ansidecl.h.
* common/buffer.h: Likewise.
* common/common-utils.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ansidecl.h.
This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
This commit creates a new header, common/common-defs.h, to hold
definitions common to all code under gdb/. Both gdb/defs.h and
gdb/gdbserver/server.h are modified to include common-defs.h as
their first non-comment line; all code under gdb/ includes either
defs.h or server.h as appropriate, so common-defs.h will be the
first actual code the compiler sees.
For this initial commit common-defs.h includes only the two
config.h files. Future commits will move more code currently
duplicated across defs.h and server.h such that shared code in
gdb/{common,target,nat} can be modified to include common-defs.h
rather than defs.h or server.h.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h.
* defs.h: Include common-defs.h.
Do not include config.h or build-gnulib/config.h.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* server.h: Include common-defs.h.
Do not include config.h or build-gnulib-gdbserver/config.h.
gdbserver defines CORE_ADDR to be signed. This seems erroneous to
me; and furthermore likely to cause problems in common/, as it is
different from gdb's definition.
gdb/gdbserver/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* server.h (CORE_ADDR): Now unsigned.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (gdb_client_data, handler_func, callback_handler_func)
(delete_file_handler, add_file_handler, append_callback_event)
(delete_callback_event, start_event_loop, initialize_event_loop):
Move to event-loop.h and include it.
* event-loop.h: New file.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (perror_with_name, error, fatal, warning, paddress)
(pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
include it.
* utils.h: New file.
server.h nowadays includes gdb_locale.h, which already brings this in.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (_): Delete.
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses. It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.
Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.
Tested on x86_64 Fedora 17.
Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Include "pathmax.h".
* utils.c: Don't include sys/param.h.
(gdb_realpath): Remove code that checks for MAXPATHLEN.
* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
instead of MAXPATHLEN.
* solib-sunos.c: Don't include sys/param.h.
* xcoffread.c: Don't include sys/param.h.
* bsd-kvm.c: Don't include sys/param.h.
* darwin-nat.c: Don't include sys/param.h.
(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* darwin-nat-info.c: Don't include sys/param.h.
* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
MAXPATHLEN.
* i386obsd-nat.c: Don't include sys/param.h.
* inf-child.c: Don't include sys/param.h.
(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
* linux-fork.c: Don't include sys/param.h.
(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
* linux-nat.c: Don't include sys/param.h.
(linux_child_pid_to_exec_file, linux_proc_pending_signals)
(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
* m68klinux-nat.c: Don't include sys/param.h.
* nbsd-nat.c: Don't include sys/param.h.
(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* ppc-linux-nat.c: Don't include sys/param.h.
* rs6000-nat.c: Don't include sys/param.h.
* spu-linux-nat.c. Don't include sys/param.h.
* windows-nat.c: Don't include sys/param.h.
* xtensa-linux-nat.c: Don't include sys/param.h.
* config/i386/nm-fbsd.h: Don't include sys/param.h.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* server.h: Include "pathmax.h".
* linux-low.c: Don't include sys/param.h.
(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
MAXPATHLEN.
* win32-low.c: Don't include sys/param.h.
(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
Right now there are two nightly commits to update a file in the tree
with the current date. One commit is for BFD, one is for gdb.
It seems unnecessary to me to do this twice. We can make do with a
single such commit.
This patch changes gdb in a minimal way to reuse the BFD date -- it
extracts it from bfd/version.h and changes version.in to use the
placeholder string "DATE" for those times when a date is wanted.
I propose removing the cron job that updates the version on trunk, and
then check in this patch.
For release branches, we can keep the cron job, but just tell it to
rewrite bfd/version.h. I believe this is a simple change in the
crontab -- the script will work just fine on this file.
This also moves version.in and version.h into common/, to reflect
their shared status; and updates gdbserver to use version.h besides.
* common/create-version.sh: New file.
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(HFILES_NO_SRCDIR): Use common/version.h.
* version.in: Move to ...
* common/version.in: ... here. Replace date with "DATE".
* version.h: Move to ...
* common/version.h: ... here.
gdbserver:
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(version.o): Remove.
* gdbreplay.c: Include version.h.
(version, host_name): Don't declare.
* server.h: Include version.h.
(version, host_name): Don't declare.
doc:
* Makefile.in (POD2MAN1, POD2MAN5): Use version.subst.
(GDBvn.texi): Use version.subst.
(version.subst): New target.
(mostlyclean): Remove version.subst.
This patch makes GDBserver support multi-process + biarch.
Currently, if you're debugging more than one process at once with a
single gdbserver (in extended-remote mode), then all processes must
have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you
see this:
Added inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
Reading symbols from /home/pedro/gdb/tests/main32...done.
Temporary breakpoint 2 at 0x4004cf: main. (2 locations)
Starting program: /home/pedro/gdb/tests/main32
warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... etc, etc ...
Even though the process was running a 32-bit program, GDBserver sent
back to GDB a register set in 64-bit layout.
A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a
while ago made GDB track a target_gdbarch per inferior, and as
consequence, fetch a target description per-inferior. This patch is
the GDBserver counterpart, that makes GDBserver keep track of each
process'es XML target description and register layout. So in the
example above, GDBserver will send the correct register set in 32-bit
layout to GDB.
A new "struct target_desc" object (tdesc for short) is added, that
holds the target description and register layout information about
each process. Each `struct process_info' holds a pointer to a target
description. The regcache also gains a pointer to a target
description, mainly for convenience, and parallel with GDB (and
possible future support for programs that flip processor modes).
The low target's arch_setup routines are responsible for setting the
process'es correct tdesc. This isn't that much different to how
things were done before, except that instead of detecting the inferior
process'es architecture and calling the corresponding
init_registers_FOO routine, which would change the regcache layout
globals and recreate the threads' regcaches, the regcache.c globals
are gone, and the init_registers_$BAR routines now each initialize a
separate global struct target_desc object (one for each arch variant
GDBserver supports), and so all the init_registers_$BAR routines that
are built into GDBserver are called early at GDBserver startup time
(similarly to how GDB handles its built-in target descriptions), and
then the arch_setup routine is responsible for making
process_info->tdesc point to one of these target description globals.
The regcache module is all parameterized to get the regcache's layout
from the tdesc object instead of the old register_bytes, etc. globals.
The threads' regcaches are now created lazily. The old scheme where
we created each of them when we added a new thread doesn't work
anymore, because we add the main thread/lwp before we see it stop for
the first time, and it is only when we see the thread stop for the
first time that we have a chance of determining the inferior's
architecture (through the_low_target.arch_setup). Therefore when we
add the main thread we don't know which architecture/tdesc its
regcache should have.
This patch makes the gdb.multi/multi-arch.exp test now pass against
(extended-remote) GDBserver. It currently fails, without this patch.
The IPA also uses the regcache, so it gains a new global struct
target_desc pointer, which points at the description of the process it
is loaded in.
Re. the linux-low.c & friends changes. Since the register map
etc. may differ between processes (64-bit vs 32-bit) etc., the
linux_target_ops num_regs, regmap and regset_bitmap data fields are no
longer sufficient. A new method is added in their place that returns
a pointer to a new struct that includes all info linux-low.c needs to
access registers of the current inferior.
The patch/discussion that originally introduced
linux-low.c:disabled_regsets mentions that the disabled_regsets set
may be different per mode (in a biarch setup), and indeed that is
cleared whenever we start a new (first) inferior, so that global is
moved as well behind the new `struct regs_info'.
On the x86 side:
I simply replaced the i387-fp.c:num_xmm_registers global with a check
for 64-bit or 32-bit process, which is equivalent to how the global
was set. This avoided coming up with some more general mechanism that
would work for all targets that use this module (GNU/Linux, Windows,
etc.).
Tested:
GNU/Linux IA64
GNU/Linux MIPS64
GNU/Linux PowerPC (Fedora 16)
GNU/Linux s390x (Fedora 16)
GNU/Linux sparc64 (Debian)
GNU/Linux x86_64, -m64 and -m32 (Fedora 17)
Cross built, and smoke tested:
i686-w64-mingw32, under Wine.
GNU/Linux TI C6x, by Yao Qi.
Cross built but otherwise not tested:
aarch64-linux-gnu
arm-linux-gnu
m68k-linux
nios2-linux-gnu
sh-linux-gnu
spu
tilegx-unknown-linux-gnu
Completely untested:
GNU/Linux Blackfin
GNU/Linux CRIS
GNU/Linux CRISv32
GNU/Linux TI Xtensa
GNU/Linux M32R
LynxOS
QNX NTO
gdb/gdbserver/
2013-06-07 Pedro Alves <palves@redhat.com>
* Makefile.in (OBS): Add tdesc.o.
(IPA_OBJS): Add tdesc-ipa.o.
(tdesc-ipa.o): New rule.
* ax.c (gdb_eval_agent_expr): Adjust register_size call to new
interface.
* linux-low.c (new_inferior): Delete.
(disabled_regsets, num_regsets): Delete.
(linux_add_process): Adjust to set the new per-process
new_inferior flag.
(linux_detach_one_lwp): Adjust to call regcache_invalidate_thread.
(linux_wait_for_lwp): Adjust. Only call arch_setup if the event
was a stop. When calling arch_setup, switch the current inferior
to the thread that got an event.
(linux_resume_one_lwp): Adjust to call regcache_invalidate_thread.
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): New regsets_info parameter.
Adjust to use it.
(linux_register_in_regsets): New regs_info parameter. Adjust to
use it.
(register_addr, fetch_register, store_register): New usrregs_info
parameter. Adjust to use it.
(usr_fetch_inferior_registers, usr_store_inferior_registers): New
parameter regs_info. Adjust to use it.
(linux_fetch_registers): Get the current inferior's regs_info, and
adjust to use it.
(linux_store_registers): Ditto.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): New.
(initialize_low): Don't initialize the target_regsets here. Call
initialize_low_arch.
* linux-low.h (target_regsets): Delete declaration.
(struct regsets_info): New.
(struct usrregs_info): New.
(struct regs_info): New.
(struct process_info_private) <new_inferior>: New field.
(struct linux_target_ops): Delete the num_regs, regmap, and
regset_bitmap fields. New field regs_info.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare.
* i387-fp.c (num_xmm_registers): Delete.
(i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno
calls to new interface.
(i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache)
(i387_xsave_to_cache): Adjust find_regno calls to new interface.
Infer the number of xmm registers from the regcache's target
description.
* i387-fp.h (num_xmm_registers): Delete.
* inferiors.c (add_thread): Don't install the thread's regcache
here.
* proc-service.c (gregset_info): Fetch the current inferior's
regs_info. Adjust to use it.
* regcache.c: Include tdesc.h.
(register_bytes, reg_defs, num_registers)
(gdbserver_expedite_regs): Delete.
(get_thread_regcache): If the thread doesn't have a regcache yet,
create one, instead of aborting gdbserver.
(regcache_invalidate_one): Rename to ...
(regcache_invalidate_thread): ... this.
(regcache_invalidate_one): New.
(regcache_invalidate): Only invalidate registers of the current
process.
(init_register_cache): Add target_desc parameter, and use it.
(new_register_cache): Ditto. Assert the target description has a
non zero registers_size.
(regcache_cpy): Add assertions. Adjust.
(realloc_register_cache, set_register_cache): Delete.
(registers_to_string, registers_from_string): Adjust.
(find_register_by_name, find_regno, find_register_by_number)
(register_cache_size): Add target_desc parameter, and use it.
(free_register_cache_thread, free_register_cache_thread_one)
(regcache_release, register_cache_size): New.
(register_size): Add target_desc parameter, and use it.
(register_data, supply_register, supply_register_zeroed)
(supply_regblock, supply_register_by_name, collect_register)
(collect_register_as_string, collect_register_by_name): Adjust.
* regcache.h (struct target_desc): Forward declare.
(struct regcache) <tdesc>: New field.
(init_register_cache, new_register_cache): Add target_desc
parameter.
(regcache_invalidate_thread): Declare.
(regcache_invalidate_one): Delete declaration.
(regcache_release): Declare.
(find_register_by_number, register_cache_size, register_size)
(find_regno): Add target_desc parameter.
(gdbserver_expedite_regs, gdbserver_xmltarget): Delete
declarations.
* remote-utils.c: Include tdesc.h.
(outreg, prepare_resume_reply): Adjust.
* server.c: Include tdesc.h.
(gdbserver_xmltarget): Delete declaration.
(get_features_xml, process_serial_event): Adjust.
* server.h [IN_PROCESS_AGENT] (struct target_desc): Forward
declare.
(struct process_info) <tdesc>: New field.
(ipa_tdesc): Declare.
* tdesc.c: New file.
* tdesc.h: New file.
* tracepoint.c: Include tdesc.h.
[IN_PROCESS_AGENT] (ipa_tdesc): Define.
(get_context_regcache): Adjust to pass ipa_tdesc down.
(do_action_at_tracepoint): Adjust to get the register cache size
from the context regcache's description.
(traceframe_walk_blocks): Adjust to get the register cache size
from the current trace frame's description.
(traceframe_get_pc): Adjust to get current trace frame's
description and pass it down.
(gdb_collect): Adjust to get the register cache size from the
IPA's description.
* linux-amd64-ipa.c (tdesc_amd64_linux): Declare.
(gdbserver_xmltarget): Delete.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-i386-ipa.c (tdesc_i386_linux): Declare.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-x86-low.c: Include tdesc.h.
[__x86_64__] (is_64bit_tdesc): New.
(ps_get_thread_area, x86_get_thread_area): Use it.
(i386_cannot_store_register): Rename to ...
(x86_cannot_store_register): ... this. Use is_64bit_tdesc.
(i386_cannot_fetch_register): Rename to ...
(x86_cannot_fetch_register): ... this. Use is_64bit_tdesc.
(x86_fill_gregset, x86_store_gregset): Adjust register_size calls
to new interface.
(target_regsets): Rename to ...
(x86_regsets): ... this.
(x86_get_pc, x86_set_pc): Adjust register_size calls to new
interface.
(x86_siginfo_fixup): Use is_64bit_tdesc.
[__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux)
(tdesc_x32_avx_linux, tdesc_x32_linux)
(tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux):
Declare.
(x86_linux_update_xmltarget): Delete.
(I386_LINUX_XSAVE_XCR0_OFFSET): Define.
(have_ptrace_getfpxregs, have_ptrace_getregset): New.
(AMD64_LINUX_USER64_CS): New.
(x86_linux_read_description): New, based on
x86_linux_update_xmltarget.
(same_process_callback): New.
(x86_arch_setup_process_callback): New.
(x86_linux_update_xmltarget): New.
(x86_regsets_info): New.
(amd64_linux_regs_info): New.
(i386_linux_usrregs_info): New.
(i386_linux_regs_info): New.
(x86_linux_regs_info): New.
(x86_arch_setup): Reimplement.
(x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc.
(x86_emit_ops): Ditto.
(the_low_target): Adjust. Install x86_linux_regs_info,
x86_cannot_fetch_register, and x86_cannot_store_register.
(initialize_low_arch): New.
* linux-ia64-low.c (tdesc_ia64): Declare.
(ia64_fetch_register): Adjust.
(ia64_usrregs_info, regs_info): New globals.
(ia64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sparc-low.c (tdesc_sparc64): Declare.
(sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack):
Adjust.
(sparc_arch_setup): New function.
(sparc_regsets_info, sparc_usrregs_info, regs_info): New globals.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l)
(tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l)
(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l)
(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l)
(tdesc_powerpc_64l, tdesc_powerpc_altivec64l)
(tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l)
(tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l)
(tdesc_powerpc_isa205_vsx64l): Declare.
(ppc_cannot_store_register, ppc_collect_ptrace_register)
(ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc)
(ppc_set_pc, ppc_get_hwcap): Adjust.
(ppc_usrregs_info): Forward declare.
(!__powerpc64__) ppc_regmap_adjusted: New global.
(ppc_arch_setup): Adjust to the current process'es target
description.
(ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset)
(ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse)
(ppc_store_evrregset): Adjust.
(target_regsets): Rename to ...
(ppc_regsets): ... this, and make static.
(ppc_usrregs_info, ppc_regsets_info, regs_info): New globals.
(ppc_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1)
(tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1)
(tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1)
(tdesc_s390x_linux64v2): Declare.
(s390_collect_ptrace_register, s390_supply_ptrace_register)
(s390_fill_gregset, s390_store_last_break): Adjust.
(target_regsets): Rename to ...
(s390_regsets): ... this, and make static.
(s390_get_pc, s390_set_pc): Adjust.
(s390_get_hwcap): New target_desc parameter, and use it.
[__s390x__] (have_hwcap_s390_high_gprs): New global.
(s390_arch_setup): Adjust to set the current process'es target
description. Don't adjust the regmap.
(s390_usrregs_info, s390_regsets_info, regs_info): New globals.
[__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264)
(regs_info_3264): New globals.
(s390_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux)
(tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare.
[__mips64] (init_registers_mips_linux)
(init_registers_mips_dsp_linux): Delete defines.
[__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines.
(have_dsp): New global.
(mips_read_description): New, based on mips_arch_setup.
(mips_arch_setup): Reimplement.
(get_usrregs_info): New function.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset)
(mips_fill_fpregset, mips_store_fpregset): Adjust.
(target_regsets): Rename to ...
(mips_regsets): ... this, and make static.
(mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info)
(dsp_regs_info, regs_info): New globals.
(mips_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt)
(tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon):
Declare.
(arm_fill_vfpregset, arm_store_vfpregset): Adjust.
(arm_read_description): New, with bits factored from
arm_arch_setup.
(arm_arch_setup): Reimplement.
(target_regsets): Rename to ...
(arm_regsets): ... this, and make static.
(arm_regsets_info, arm_usrregs_info, regs_info): New globals.
(arm_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m68k-low.c (tdesc_m68k): Declare.
(target_regsets): Rename to ...
(m68k_regsets): ... this, and make static.
(m68k_regsets_info, m68k_usrregs_info, regs_info): New globals.
(m68k_regs_info): New function.
(m68k_arch_setup): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sh-low.c (tdesc_sharch): Declare.
(target_regsets): Rename to ...
(sh_regsets): ... this, and make static.
(sh_regsets_info, sh_usrregs_info, regs_info): New globals.
(sh_regs_info, sh_arch_setup): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-bfin-low.c (tdesc_bfin): Declare.
(bfin_arch_setup): New function.
(bfin_usrregs_info, regs_info): New globals.
(bfin_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_cris): Declare.
(cris_arch_setup): New function.
(cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_crisv32): Declare.
(cris_arch_setup): New function.
(cris_regsets_info, cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m32r-low.c (tdesc_m32r): Declare.
(m32r_arch_setup): New function.
(m32r_usrregs_info, regs_info): New globals.
(m32r_regs_info): Adjust.
(initialize_low_arch): New function.
* linux-tic6x-low.c (tdesc_tic6x_c64xp_linux)
(tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare.
(tic6x_usrregs_info): Forward declare.
(tic6x_read_description): New function, based on ...
(tic6x_arch_setup): ... this. Reimplement.
(target_regsets): Rename to ...
(tic6x_regsets): ... this, and make static.
(tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals.
(tic6x_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-xtensa-low.c (tdesc_xtensa): Declare.
(xtensa_fill_gregset, xtensa_store_gregset): Adjust.
(target_regsets): Rename to ...
(xtensa_regsets): ... this, and make static.
(xtensa_regsets_info, xtensa_usrregs_info, regs_info): New
globals.
(xtensa_arch_setup, xtensa_regs_info): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-nios2-low.c (tdesc_nios2_linux): Declare.
(nios2_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(nios2_regsets): ... this.
(nios2_regsets_info, nios2_usrregs_info, regs_info): New globals.
(nios2_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-aarch64-low.c (tdesc_aarch64): Declare.
(aarch64_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(aarch64_regsets): ... this.
(aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals.
(aarch64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare
globals.
(target_regsets): Rename to ...
(tile_regsets): ... this.
(tile_regsets_info, tile_usrregs_info, regs_info): New globals.
(tile_regs_info): New function.
(tile_arch_setup): Set the current process'es tdesc.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* spu-low.c (tdesc_spu): Declare.
(spu_create_inferior, spu_attach): Set the new process'es tdesc.
* win32-arm-low.c (tdesc_arm): Declare.
(arm_arch_setup): New function.
(the_low_target): Install arm_arch_setup instead of
init_registers_arm.
* win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare.
(init_windows_x86): Rename to ...
(i386_arch_setup): ... this. Set `win32_tdesc'.
(the_low_target): Adjust.
* win32-low.c (win32_tdesc): New global.
(child_add_thread): Don't create the thread cache here.
(do_initial_child_stuff): Set the new process'es tdesc.
* win32-low.h (struct target_desc): Forward declare.
(win32_tdesc): Declare.
* lynx-i386-low.c (tdesc_i386): Declare global.
(lynx_i386_arch_setup): Set `lynx_tdesc'.
* lynx-low.c (lynx_tdesc): New global.
(lynx_add_process): Set the new process'es tdesc.
* lynx-low.h (struct target_desc): Forward declare.
(lynx_tdesc): Declare global.
* lynx-ppc-low.c (tdesc_powerpc_32): Declare global.
(lynx_ppc_arch_setup): Set `lynx_tdesc'.
* nto-low.c (nto_tdesc): New global.
(do_attach): Set the new process'es tdesc.
* nto-low.h (struct target_desc): Forward declare.
(nto_tdesc): Declare.
* nto-x86-low.c (tdesc_i386): Declare.
(nto_x86_arch_setup): Set `nto_tdesc'.
gdb/
2013-06-07 Pedro Alves <palves@redhat.com>
* regformats/regdat.sh: Output #include tdesc.h. Make globals
static. Output a global target description pointer.
(init_registers_${name}): Adjust to initialize a
target description structure.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Don Breazeal
Pedro Alves
Joel Brobecker
Yao Qi
Gary Benson
Tom Tromey
Doug Evans
Joel Brobecker
Keith Seitz