* readelf.c (print_gnu_build_attribute_name): Allow stack
protection notes to contain numeric values. Use a colon rather
than a space to separate a string name from its values. Decode
the numeric value of a stack protection note.
* objcopy.c (merge_gnu_build_notes): Allow version notes to
contain extra text after the protocol version number.
The fix for PR binutils/17512 added a check for the dynamic segment being
inside the actual ELF file. If not an error message would be produced:
readelf: Error: the dynamic segment offset + size exceeds the size of the file
Unfortunately for separate debuginfo files it is common for the dynamic
segment not being inside the file because the .dynamic section is NOBITS.
Since the check is done unconditionally in process_program_headers and
process_program_headers is always called (to setup dynamic_addr in case
it is needed). The error is produced on any operations done on any .debug
file (even if no program headers or the dynamic segment is used).
If there are section headers then a cross check is done to see if the
.dynamic section is NOBITS in which case dynamic_addr is set to zero
without a warning or error (which is then checked first before any
operation on the dynamic segement is done).
Move the check for the dynamic segment being inside the actual ELF file
after the cross check with the section headers to suppress the error for
.debug files.
binutils/ChangeLog:
* readelf.c (process_program_headers): Move dynamic_addr check
after .dynamic section cross check.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD
note type.
binutils * readelf.c (print_gnu_build_attribute_name): Add support for
GNU_BUILD_ATTRIBUTE_SHORT_ENUM.
* readelf.c (print_gnu_build_attribute_description): Move symbol
printing code to...
(print_symbol_for_build_attribute): New function. ...here.
Add to find the best symbol to associate with an OPEN note.
Add code to cache the symbol table and string table, so that they
are not loaded every time a note is displayed.
* testsuite/binutils-all/note-2-32.s: Add a function symbol.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-2-32.d: Update expected note output.
* testsuite/binutils-all/note-2-64.d: Likewise.
If the source file is more recent than the object file, line number
information in the object may no longer match the source. So print a
warning message.
* objdump.c (update_source_path): Add abfd param. Add struct
stat vars. Pass to try_print_file_open. Warn if source is more
recent than object.
(try_print_file_open, slurp_file): Add struct stat param to
return fstat.
(show_line): Call update_source_path with bfd.
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects. We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.
binutils/
PR binutils/21231
* readelf.c (decode_x86_isa): Change argument to unsigned int.
(print_gnu_property_note): Retrieve property type and datasz as
4-byte integer. Consolidate property datasz check. Check
GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
* testsuite/binutils-all/i386/pr21231a.d: New file.
* testsuite/binutils-all/i386/pr21231a.s: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
include/
PR binutils/21231
* elf/common.h (GNU_PROPERTY_LOPROC): New.
(GNU_PROPERTY_HIPROC): Likewise.
(GNU_PROPERTY_LOUSER): Likewise.
(GNU_PROPERTY_HIUSER): Likewise.
* readelf.c (print_gnu_build_attribute_name): Read byte values
from the name string as unsigned bytes.
(process_notes_at): Use memcpy to copy an unterminated name
string.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
binutils/
2017-02-27 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compilation with GCC 4.4.7.
* dwarf.c (display_loclists_list, display_debug_rnglists_list):
Initialize begin and end.
PR 20881
* dlltool.c (secdata): Align .idata$6 on 2 byte boundary.
(make_one_lib_file): Export a symbol called __nm_<symbol> for use
with auto-importing.
On some targets, .string does not add a NUL string terminator.
* testsuite/binutils-all/dw5.S: Replace .string with .asciz.
Support hpux .comm variant.
* testsuite/binutils-all/readelf.exp: Define HPUX when assembling
dw5 test for hppa64-hpux.
(process_program_headers): Fix snafu - if the program headers are
not available then this is not a cause to fail.
(process_corefile_note_segments): Likewise.
Remove a trailing space or a leading pipe character from version flags
printed with `readelf --version-info'.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
$
which includes an unnecessary space after `BASE'; both call sites
already provide suitable separation from output that follows. Also if
only unknown flags were present, then lone `| <unknown>' would be
printed.
binutils/
* readelf.c (get_ver_flags): Tidy the formatting of the string
returned
Make `isum' unsigned like data it is calculated from.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Make
`isum' unsigned.
<SHT_GNU_verneed>: Likewise.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' regression that caused "Version definition past
end of section" to be always printed at the end, even with good section
data.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
The cause is the `if (idx + ent.vd_next <= idx)' condition introduced to
ensure forward progress, which however always triggers for good version
definition section data as the last entry will have its `vd_next' value
set to 0.
Adjust the condition then, to say `if (idx + ent.vd_next < idx)' instead
and to ensure forward progress limit the number of entries processed to
the size of the version definition section, removing the problematic
message from output quoted above, while ensuring the original PR 17531
test case is still handled gracefully.
Add a suitable test case so that we have `readelf --version-info'
coverage; due to the lack of infrastructure needed to run the linker in
the `binutils' test suite and limited justification to implement it add
a new `readelf.exp' script to the `ld' test suite instead, intended to
gather any `readelf' test cases that require the linker to be run. If
ever we decide to have linker infrastructure added to the `binutils'
test suite, then the script can be moved between the test suites.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Limit
the number of entries processed by the section size. Don't
break out of the loop if `ent.vd_next' is 0.
ld/
* testsuite/ld-elf/ver_def.d: New test.
* testsuite/ld-elf/ver_def.ld: New test linker script.
* testsuite/ld-elf/ver_def.ver: New test version script.
* testsuite/ld-elf/ver_def.s: New test source.
* testsuite/ld-elf/readelf.exp: New test script.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* testsuite/binutils-all/dw5.S: New file.
* testsuite/binutils-all/dw5.W: New file.
* testsuite/binutils-all/readelf.exp (readelf -wiaoRlL): New test.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (decode_location_expression): Support DW_OP_implicit_pointer,
DW_OP_const_type, DW_OP_regval_type, DW_OP_deref_type, DW_OP_convert
and DW_OP_reinterpret.
(read_and_display_attr_value): Support DW_AT_call_value,
DW_AT_call_data_value, DW_AT_call_target and
DW_AT_call_target_clobbered.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (fetch_indirect_line_string): New function.
(abbrev_attr): New field implicit_const.
(add_abbrev_attr): New parameter implicit_const.
(process_abbrev_section): Support DW_FORM_implicit_const.
(decode_location_expression): Support DW_OP_entry_value.
(read_and_display_attr_value): Add parameter implicit_const. Support
DW_FORM_line_strp and DW_FORM_implicit_const.
(read_and_display_attr): Add parameter implicit_const.
(process_debug_info): Support line_str and DWARF-5.
(read_debug_line_header): Support DWARF-5.
(display_formatted_table): New function.
(display_debug_lines_raw): New parameter file. Support DWARF-5.
(display_debug_lines_decoded): New parameter fileptr. Support DWARF-5.
(display_debug_lines): Pass file parameter.
(display_debug_macro): Update read_and_display_attr_value caller.
(display_debug_abbrev): Support DW_FORM_implicit_const.
(display_loclists_list): New function.
(display_loc_list): Support .debug_loclists.
(display_debug_ranges_list): New function from display_debug_ranges.
(display_debug_rnglists_list): New function.
(display_debug_ranges): Support .debug_rnglists.
(debug_displays): Add .debug_line_str, .debug_loclists and
.debug_rnglists.
* dwarf.h: Include dwarf2.h
(DWARF2_Internal_LineInfo): Add li_offset_size.
(DWARF2_Internal_CompUnit): Add cu_unit_type.
(enum dwarf_section_display_enum): Add line_str.
* readelf.c (process_section_headers): Add rnglists and loclists.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (display_loc_list): Use dwarf_vma for offset, base_address
and off.
(display_loc_list_dwo): Use dwarf_vma for offset.
(display_debug_loc): Use dwarf_vma for offset, base_address.
(struct range_entry, range_entry_compar): Use dwarf_vma for
ranges_offset.
(display_debug_ranges): Use dwarf_vma for ranges_offset, offset and
base_address.
* readelf.c (display_tag_value): Use an explicit signed type for
the tag parameter.
(display_gnu_attributes): Use an unsigned integer type for
attribute tags.
(display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute): Likewise.
(display_sparc_hwcaps): Likewise.
(display_sparc_hwcaps2): Likewise.
(display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_raw_attribute): Likewise.
(process_attributes): Likewise.
(process_arm_specific): Delete redundant function.
(process_power_specific): Likewise.
(process_s390_specific): Likewise.
(process_sparc_specific): Likewise.
(process_tic6x_specific): Likewise.
(process_msp430x_specific): Likewise.
(display_public_gnu_attributes): New function. Displays known
information about an unknown gnu attribute.
(display_generic_attribute): New function. Calls
display_tag_value for non-nul tags.
(process_arch_specific): Call process_attributes even for
architectures not known to specifically support gnu attributes.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' output formatting regression where a dropped
new line caused section header information from the `.gnu.version_d'
version definition section to be printed on the same line as this
section's first entry.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr) 000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
Add the new line then, to get:
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
instead.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Print a
new line between the heading and the first version definition
entry.
PR binutils/21156
* dwarf.c (cu_tu_indexes_read): Move into...
(load_cu_tu_indexes): ... here. Change the variable into
tri-state. Change the function into boolean, returning
false if the indicies could not be loaded.
(find_cu_tu_set): Return NULL if the indicies could not be
loaded.
The direct references in objcopy kind of look like a hack to me, so
I'm calling these symbols internal too. Certainly they aren't named
and documented as a public BFD symbol today anyway.
So ... give these bfd-internal symbols with external linkage a _bfd_
prefix to avoid collisions in the global symbol namespace.
While at it, give them names that more closely match the corresponding
option name that toggles them.
Also while at it, fix a few related comment typos.
gdb/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* srec.c (Chunk): Rename to ...
(_bfd_srec_len): ... this.
(S3Forced): Rename to ...
(_bfd_srec_forceS3): ... this.
* objcopy.c: Adjust all references.
PR binutils/21155
* readelf.c (IN_RANGE): New macro. Tests for an address + offset
being within a given range.
(target_specific_reloc_handling): Use macro to test for underflow
as well as overflow of reloc offset.
PR binutils/21139
* readelf.c (target_specific_reloc_handling): Add num_syms
parameter. Check for symbol table overflow before accessing
symbol value. If reloc pointer is NULL, discard all saved state.
(apply_relocations): Pass num_syms to target_specific_reloc_handling.
Call target_specific_reloc_handling with a NULL reloc pointer
after processing all of the relocs.
PR binutils/21137
* readelf.c (target_specific_reloc_handling): Add end parameter.
Check for buffer overflow before writing relocated values.
(apply_relocations): Pass end to target_specific_reloc_handling.
PR 20343
ld * ld.texinfo (Options): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
binutils* doc/binutils.texi (ar): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
(nm): Likewise.
When displaying the section headers table using objdump (-h), the column
containing the section header name is currently fixed at 13 characters.
A section name that is longer than 13 characters will overflow the
column causing the table to become miss-aligned.
In this commit I change the behaviour so that _in wide mode_ (-w -h) the
section name column is dynamically resized to fit the longest section
name we plan to display. In wide mode the column still retains a
minimum width of 13 characters.
In non-wide more the behaviour is completely unchanged.
While I was changing the dump_headers function I have unified the two
printf lines that handled the different address widths into a single
printf, the address width is now passed into printf using the '*' field
width format character.
binutils/ChangeLog:
* objdump.c (dump_section_header): Extract max section name length
from data parameter, use this when formatting output.
(find_longest_section_name): New function.
(dump_headers): Calculate longest section name when in wide mode,
reformat to unify printing of header line.
ld/ChangeLog:
* testsuite/ld-elf/eh-frame-hdr.d: Update expected results.
PR 21059
binutils* arlex.l: Support processing with flex 2.6.3.
* deflex.l: Likewise.
gas * config/bfin-lex.l: Support processing with flex 2.6.3.
* itbl-lex.l: Likewise.
binutils* resbin.c: Optional dialog control data immediately follow
the control description without alignment.
* testsuite/binutils-all/windres/controldata.rc: New test.
source.
* testsuite/binutils-all/windres/controldata.rsd: New test.
PR binutils/20876
bfd * opncls.c (find_separate_debug_file): Add include_dirs
parameter. Only include the directory part of the bfd's filename
in search paths if include_dirs is true. Add a couple of extra
locations for looking for debug files.
( bfd_follow_gnu_debuglink): Update invocation of
find_separate_debug_file.
(bfd_follow_gnu_debugaltlink): Likewise.
(get_build_id): New function: Finds the build-id of the given bfd.
(get_build_id_name): New function: Computes the name of the
separate debug info file for a bfd, based upon its build-id.
(check_build_id_file): New function: Checks to see if a separate
debug info file exists at the given location, and that its
build-id matches that of the original bfd.
(bfd_follow_build_id_debuglink): New function: Finds a separate
debug info file for a given bfd by using the build-id method.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
method of locating a separate debug info file before using the
debuglink method.
* bfd-in2.h: Regenerate.
binutils * NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
New proc to test the location of separate debug info files using
the build-id method.
bfd * dwarf2.c (lookup_address_in_function_table): Return early if
there are no functions in the given comp unit, or if the high
address of the last function in the comp unit is less than the
desired address.
binutils * objdump.c (display_file): Add new parameter 'last_file'. If
last_file is true, do not call bfd_close at the end of the
function.
(main): Set the value of the last_file parameter when calling
display_file.
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Complement commit dd8b7c222e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time. Adjust code description for accuracy. Add a
suitable test case.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
adjustment for PC-relative operations following MIPS16e compact
jumps or undefined RR/J(AL)R(C) encodings.
binutils/
* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
PR binutils/20930
* objcopy.c (mark_symbols_used_in_relocations): Check for a null
symbol pointer pointer before attempting to mark the symbol as
kept.
The attached patch fixes a problem where nm displays bogus information for
synthetic symbol sizes when --size-sort is used.
This happens because the synthetic symbols (dot symbols for ppc64) are
generated based on their non-dot symbols. The generation process doesn't copy
over the ELF-specific bits of the regular non-dot symbols.
When --size-sort is used, the code attempts to access the symbol size from
the ELF-specific bits and ends up reading gargabe, causing the size to be
displayed incorrectly.
With the patch, i can see dot and non-dot symbols having the same size with
--size-sort.
This doesn't fix the fact that we don't display size information for synthetic
symbols without --size-sort, which i may address in the future.
binutils/ChangeLog:
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
* nm.c (sort_symbols_by_size): Don't read symbol size if symbol
is synthetic.
This patch fixes:
- fpus and fpud are swaped.
- quarkse_em doesn't include FPX extensions.
- auto guessed opcode mechanism may ignore the option passed via -M<feature> option.
opcodes/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (is_compatible_p): Remove function.
(skip_this_opcode): Don't add any decoding class to decode list.
Remove warning.
(find_format_from_table): Go through all opcodes, and warn if we
use a guessed mnemonic.
binutils/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/binutils-all/arc/objdump.exp (Warning test): Update
test.
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
PR binutils/20814
* dlltool.c (struct export): Remove hint field.
(make_one_lib_file): Store the ordinal value for IDATA6 not the
hint.
(gen_lib_file): Delete reference to hint field.
(mangle_defs): Delete computation of hint field.