This patch adds a test for tracepoints enabling/disabling, which
didn't work properly for fast tracepoints on big endian systems.
gdb/testsuite/ChangeLog:
* gdb.trace/trace-enable-disable.exp: New file.
* gdb.trace/trace-enable-disable.c: New file.
Some fast tracepoints tests make sure that the in-process agent library
is properly loaded, by searching for the library name in "info
sharedlibrary".
Originally, it would search for the full path. Since patch "Make ftrace
tests work with remote targets" [1], the "runtime" location of the IPA,
in the standard output directory, is not the same as the original
location, in the gdbserver build directory. Therefore, the patch
changed the checks:
gdb_test "info sharedlibrary" ".*${libipa}.*" "IPA loaded"
to
gdb_test "info sharedlibrary" ".*[file tail ${libipa}].*" "IPA loaded"
so that only the "libinproctrace.so" part would be searched for.
Antoine (in CC) pointed out that I missed some, so I have to update
them. In the mean time, I noticed that I missed a few test failures:
adding the SONAME to the IPA makes it possible for the test executable
to erroneously pick up libinproctrace.so from /usr/lib if the test
harness failed to put the libinproctrace.so we want to test in the right
place. To mitigate that kind of error in the future, we can use the
return value of gdb_load_shlib (the path of the "runtime" version of the
library) and use that to search in the output of info sharedlibrary.
When testing locally, gdb_load_shlib returns the full normalized path of
the destination library, which the test executable should use e.g.:
/path/to/gdb/testsuite/outputs/gdb.trace/thetest/libinproctrace.so
My testing showed that it was the same path that gdb displayed in info
sharedlibrary. If the test executable picks up another
libinproctrace.so, the test will fail.
When testing remotely, gdb_load_shlib/gdb_remote_download only returns
us "libinproctrace.so", so the situation doesn't really change. If
there is a rogue libinproctrace.so in /usr/lib on the target and we fail
to download ours, it might cover up a test failure. But that situation
is probably still better than the original one, where it wasn't possible
to test remotely using the IPA at all.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=6e774b13c3b81ac2599812adf058796948ce7e95
gdb/testsuite/ChangeLog:
* gdb.arch/ftrace-insn-reloc.exp: Save gdb_load_shlib result,
use it in info sharedlibrary test.
* gdb.trace/ftrace-lock.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/range-stepping.exp: Likewise.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-condition.exp: Likewise.
* gdb.trace/trace-mt.exp: Likewise.
This patch makes gdb_load_shlibs return the destination path of the
copied library. To make the procedure implementation and interface more
straightforward, it also changes it so that it accepts a single shared
library path at the time. Therefore, calls that are passed multiple
libraries:
gdb_load_shlibs $lib1 $lib2
must be changed to separate calls:
gdb_load_shlibs $lib1
gdb_load_shlibs $lib2
A subtle impact is the solib-search-path handling. In the former
version, solib-search-path is set using the directory of the first
passed lib (further calls overwrite the value). In the later version,
the directory of the library passed to the last call to gdb_load_shlibs
remnains. I don't think that's a problem in practice, since if we had
tests that needed multiple different paths in solib-search-path, they
wouldn't work in the first place.
Changed in v2:
* Split behavioural and rename changes in two separate patches.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_load_shlibs): Accept a single argument. Return
result of gdb_remote_download.
* gdb.base/ctxobj.exp: Split gdb_load_shlibs call.
* gdb.base/dso2dso.exp: Likewise.
* gdb.base/global-var-nested-by-dso.exp: Likewise.
* gdb.base/print-file-var.exp: Likewise.
* gdb.base/shlib-call.exp: Likewise.
* gdb.base/shreloc.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.base/solib-weak.exp (do_test): Likewise.
* gdb.base/unload.exp: Likewise.
I get a timeout fail in branch-to-self.exp when it is compiled by a
bare-mental target running qemu, which doesn't have signal.
The test should be skipped if gdb,nosignals exists, and that is
what this patch does.
gdb/testsuite:
2016-04-27 Yao Qi <yao.qi@linaro.org>
* gdb.base/branch-to-self.exp: Skip it if gdb,nosignals
exists.
Instead of pre-computing indices into a fortran array re-use
the value_* interfaces to subscript a fortran array.
The benefit of using the new interface is that it takes care of
dynamic types and resolve them when needed.
This fixes issues when printing structures with dynamic arrays from toplevel.
Before:
(gdb) p twov
$1 = ( (( ( 6352320, 0, -66, -1, 267) ( 343476, 1, -15, 1, 0) ( 5, 0, 5, 0, 1) ...
After:
(gdb) p twov
$1 = ( (( ( 1, 1, 1, 1, 1) ( 1, 1, 321, 1, 1) ( 1, 1, 1, 1, 1) ...
2016-04-26 Sanimir Agovic <sanimir.agovic@intel.com>
Keven Boell <keven.boell@intel.com>
Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Changelog:
* f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
function.
(F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
(f77_print_array_1): Use value_subscript to subscript a
value array.
(f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
(f_val_print): Use value_field to construct a field value.
gdb/testsuite/Changelog:
* vla-type.exp: Print structure from toplevel.
Resolve type of an array's element to be printed in case it is dynamic.
Otherwise we don't use the correct boundaries nor the right location.
Before:
ptype fivearr(1)
type = Type five
Type one
integer(kind=4) :: ivla(34196784:34196832,34197072:34197120,34197360:34197408)
End Type one :: tone
End Type five
After:
ptype fivearr(1)
type = Type five
Type one
integer(kind=4) :: ivla(2,4,6)
End Type one :: tone
End Type five
2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Changelog:
* valarith.c (value_address): Resolve dynamic types.
gdb/testsuite/Changelog:
* gdb.fortran/vla-type.f90: Add test for static and dynamic arrays
of dynamic types.
* gdb.fortran/vla-type.exp: Add test for static and dynamic arrays
of dynamic types.
Fortran supports dynamic types for which bounds, size and location
can vary during their lifetime. As a result of the dynamic
behaviour, they have to be resolved at every query.
This patch will resolve the type of a structure field when it
is dynamic.
2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
2016-04-26 Keven Boell <keven.boell@intel.com>
Before:
(gdb) print threev%ivla(1)
Cannot access memory at address 0x3
(gdb) print threev%ivla(5)
no such vector element
After:
(gdb) print threev%ivla(1)
$9 = 1
(gdb) print threev%ivla(5)
$10 = 42
gdb/Changelog:
* NEWS: Add new supported features for fortran.
* gdbtypes.c (remove_dyn_prop): New.
(resolve_dynamic_struct): Keep type length for fortran structs.
* gdbtypes.h: Forward declaration of new function.
* value.c (value_address): Return dynamic resolved location of a value.
(set_value_component_location): Adjust the value address
for single value prints.
(value_primitive_field): Support value types with a dynamic location.
(set_internalvar): Remove dynamic location property of
internal variables.
gdb/testsuite/Changelog:
* gdb.fortran/vla-type.f90: New file.
* gdb.fortran/vla-type.exp: New file.
I am seeing some test fails in gdb.trace/unavailable.exp on aarch64-linux,
like this,
print derived_whole^M
$43 = (Derived) {<Middle> = {<Base> = {x = 2}, _vptr.Middle = 0x401860 <VTT for Derived>, y = 3}, _vptr.Derived = 0x401848 <vtable for Derived+32>, z = 4}^M
(gdb) FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
print derived_whole^M
$47 = {<Middle> = {<Base> = {x = 2}, _vptr.Middle = 0x401860 <VTT for Derived>, y = 3}, _vptr.Derived = 0x401848 <vtable for Derived+32>, z = 4}^M
(gdb) FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
these fails are also found by recent x86_64-linux buildbot,
https://sourceware.org/ml/gdb-testers/2016-q2/msg00622.html
The fix is exactly the same as this one
http://www.sourceware.org/ml/gdb-patches/2015-10/msg00252.html (the
extra "VTT" after hex), in which we match extra things after $hex.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.trace/unavailable.exp (gdb_collect_globals_test_1): Match
more after $hex.
Hi,
I am seeing the fail below on aarch64-linux with gcc 4.9.2,
break main
Breakpoint 1 at 0x4006e8: file binutils-gdb/gdb/testsuite/gdb.base/annota1.c, line 14.^M
(gdb) FAIL: gdb.base/annota1.exp: breakpoint main
the test expects the breakpoint is set on line 15. Let us look at
the main function,
12 int
13 main (void)
14 {
15 int my_array[3] = { 1, 2, 3 }; /* break main */
16
17 value = 7;
18
19 #ifdef SIGUSR1
20 signal (SIGUSR1, handle_USR1);
21 #endif
(gdb) disassemble main
Dump of assembler code for function main:
0x00000000004006e0 <+0>: stp x29, x30, [sp,#-48]!
0x00000000004006e4 <+4>: mov x29, sp
0x00000000004006e8 <+8>: adrp x0, 0x411000 <signal@got.plt>
0x00000000004006ec <+12>: add x0, x0, #0x40
the breakpoint is set on the right address after skipping prologue, but
0x00000000004006e8 is mapped to the line 14, as shown below,
(gdb) maintenance info line-table
objfile: /home/yao.qi/source/build-aarch64/gdb/testsuite/outputs/gdb.base/annota1/annota1 ((struct objfile *) 0x2b0e1850)
compunit_symtab: ((struct compunit_symtab *) 0x2b0ded50)
symtab: /home/yao.qi/source/binutils-gdb/gdb/testsuite/gdb.base/annota1.c ((struct symtab *) 0x2b0dedd0)
linetable: ((struct linetable *) 0x2b12c8b0):
INDEX LINE ADDRESS
0 7 0x00000000004006d0
1 8 0x00000000004006d8
2 14 0x00000000004006e0
3 14 0x00000000004006e8
4 15 0x00000000004006fc
so GDB does nothing wrong. Program hits breakpoint on either line 14
or line 15 is right to me. With anther gcc (4.9.3), the line-table looks
correct, and no test fail. Instead of setting breakpoint on main and
assuming the line is what we get from the source, we can set breakpoint
on that line. On the other hand, the test prints the values of the
array and check, so we need to set breakpoint on the line setting the
values of array and "next", rather than setting the breakpoint on main.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.base/annota1.exp: Set breakpoint on line $main_line.
* gdb.base/annota3.exp: Likewise.
I see the following test fail in arm-linux with -marm and -fomit-frame-pointer,
step
callee () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c:27
27 } /* RETURN FROM CALLEE */
(gdb) step
main () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c:58
58 callee(); /* STEP INTO THIS CALL */
(gdb) FAIL: gdb.reverse/step-precsave.exp: reverse step into fn call
As we can see, the "step" has already stepped into the function callee,
but in the last line. The second "step" attempts to step to function
body, but it goes out of callee, which isn't expected.
The program is compiled with -marm and -fomit-frame-pointer, the
function callee is prologue-less, because nothing needs to be saved
on stack,
(gdb) disassemble callee
Dump of assembler code for function callee:
0x00010680 <+0>: movw r3, #2364 ; 0x93c
0x00010684 <+4>: movt r3, #2
0x00010688 <+8>: ldr r3, [r3]
0x0001068c <+12>: add r2, r3, #1
0x00010690 <+16>: movw r3, #2364 ; 0x93c
0x00010694 <+20>: movt r3, #2
0x00010698 <+24>: str r2, [r3]
0x0001069c <+28>: mov r3, #0
0x000106a0 <+32>: mov r0, r3
0x000106a4 <+36>: bx lr
program stops at the 0x106a0 (passed the epilogue) after the first
"step". When second "step" is executed, the stepping range is
[0x10680-0x106a0], which starts from the first instruction of function
callee (because it doesn't have prologue).
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [LWP 2461] at 0x1069c^M
infrun: prepare_to_wait^M
infrun: target_wait (-1.0.0, status) =^M
infrun: 2461.2461.0 [LWP 2461],^M
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP^M
infrun: TARGET_WAITKIND_STOPPED^M
infrun: stop_pc = 0x10698^M
infrun: stepping inside range [0x10680-0x106a0]
When program goes out of the range, it stops at the caller of callee,
and test fails. IOW, if function callee has prologue, the stepping
range won't start from the first instruction of the function, and
program stops at the prologue and test passes.
IMO, GDB does nothing wrong, but test shouldn't expect the program
stops in callee after the second "step". I decide to fix test rather
than GDB. In this patch, I change to test to do one "step", and check
the program is still in callee, then, do multiple "step" until program
goes out of the callee.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/step-precsave.exp: Do one step and test program
stops in "callee" and do multiple steps until program goes out
of "callee".
* gdb.reverse/step-reverse.exp: Likewise.
GDBserver doesn't deliver signal when stepping over a breakpoint even
hardware single step is used. When GDBserver started to step over
(thread creation) breakpoint for mutlit-threaded debugging in 2002 [1],
GDBserver behaves this way.
This behavior gets trouble on conditional breakpoints on branch to
self instruction like this,
0x00000000004005b6 <+29>: jmp 0x4005b6 <main+29>
and I set breakpoint
$(gdb) break branch-to-self.c:43 if counter > 3
and the variable counter will be set to 5 in SIGALRM signal handler.
Since GDBserver keeps stepping over breakpoint, the SIGALRM can never
be dequeued and delivered to the inferior, so the program can't stop.
The test can be found in gdb.base/branch-to-self.exp.
GDBserver didn't deliver signal when stepping over a breakpoint because
a tracepoint is collected twice if GDBserver does so in the following
scenario, which can be reproduced by gdb.trace/signal.exp.
- program stops at tracepoint, and tracepoint is collected,
- gdbserver starts a step-over,
- a signal arrives, step-over is canceled, and signal should be passed,
- gdbserver starts a new step-over again, pass the signal as well,
- program stops at the entry of signal handler, step-over finished,
- gdbserver proceeds,
- program returns from the signal handler, again to the tracepoint,
and thus is collected again.
The spurious collection isn't that harmful, IMO, so it should be OK
to let GDBserver deliver signal when stepping over a breakpoint.
gdb/gdbserver:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): Don't deliver
signal when stepping over breakpoint with software single
step.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.trace/signal.exp: Also pass if
$tracepoint_hits($i) > $iterations.
This is to test whether GDBserver deliver signal to the inferior while
doing the step over. Nowadays, GDBserver doesn't deliver signal, so
there won't be spurious collection, however, if GDBserver does deliver
signal, there might be spurious collection.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.trace/signal.c: New file.
* gdb.trace/signal.exp: New file.
After compiling a program which uses C++ references some optimizations may
convert the references into synthetic "pointers". Trying to print the address
of one of such synthetic references causes gdb to crash with the following
error:
(gdb) print &ref
/build/buildd/gdb-7.7.1/gdb/dwarf2loc.c:1624: internal-error: Should not be able to create a lazy value with an enclosing type
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Apparently, what was causing it was that value_addr returns a copy of the value
that represents the reference with its type set to T* instead of T&. However,
its enclosing_type is left untouched, which fails a check made in
read_pieced_value. We only see the crash happen for references that are
synthetic because they're treated as pieced values, thus the call to
read_pieced_value.
On a related note, it seems that in general there are all sorts of breakage
when working with synthetic references. This is reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=19893
gdb/ChangeLog:
2016-04-18 Martin Galvan <martin.galvan@tallertechnologies.com>
* valops.c (value_addr): For C++ references, set the copied value's
enclosing_type as well.
gdb/testsuite/ChangeLog:
2016-04-18 Martin Galvan <martin.galvan@tallertechnologies.com>
* gdb.dwarf2/implref.exp: New file.
Gfortran and ifort have different names for data types. Encapsulate
type names in a library to increase number of supported compilers.
gfortran -4.2 : int4
gfortran>=4.3 : integer(kind=4)
ifort : INTEGER(4)
2016-04-18 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/testsuite/Changelog:
* gdb.fortran/common-block.exp: Use type naming defined in lib fortran.
* gdb.fortran/derived-type.exp: Use type naming defined in lib fortran.
* gdb.fortran/multi-dim.exp: Use type naming defined in lib fortran.
* gdb.fortran/vla-datatypes.exp: Use type naming defined in lib fortran.
* gdb.fortran/vla-ptype-sub.exp: Use type naming defined in lib fortran.
* gdb.fortran/vla-ptype.exp: Use type naming defined in lib fortran.
* gdb.fortran/whatis_type.exp: Use type naming defined in lib fortran.
* lib/fortran.exp (fortran_int4): New procedure.
(fortran_real4, fortran_real8, fortran_complex4): Likewise.
(fortran_logical4): Likewise.
We are missing "-fpic" flag when compiling shared libraries with ICC.
2016-04-18 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Testsuite/Changelog:
* lib/gdb.exp (gdb_compile_shlib): Add flag for ICC compiler.
Add Intel specific preprocessor macros to query the version of the compiler.
2016-04-18 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Testsuite/Changelog:
* lib/compiler.c: Add Intel specific preprocessor macros.
* lib/compiler.cc: Likewise.
This test exercises the scenarios where we attempt to connect GDB to GDBserver
in standard remote mode, query the symbol file path, attempt to open said
symbol file on GDB's end and fail, causing the connection to drop abruptly.
Regression-tested on x86-64/Ubuntu.
With an unpatched GDB we should see this:
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: action=permission: connection to GDBserver succeeded (the program is no longer running)
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: action=delete: connection to GDBserver succeeded (the program is no longer running)
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=target:: action=permission: connection to GDBserver succeeded (the program is no longer running)
FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=target:: action=delete: connection to GDBserver succeeded (the program is no longer running)
A patched GDB should have full passes.
gdb/testsuite/ChangeLog:
2016-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.server/connect-with-no-symbol-file.c: New file.
* gdb.server/connect-with-no-symbol-file.exp: New file.
This patch fixes the current comment in gdb_remote_download, which is
false (the "except if that's already where it is" part). It also
improves it, by explaining why pass TOFILE through standard_output_file,
even it is an absolute path.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_remote_download): Fix and extend comment.
gdbserver-base.exp is used as the base for both native-gdbserver.exp and
native-extended-gdbserver.exp. (Despite its name, it should really be
considered as a "local-gdbserver-base", as it's not really appropriate to
implement a remote gdbserver board.)
Currently, the _download procedure is implemented as a no-op (it returns
the source file path). Because of the SONAME change, The fast
tracepoint tests now require the executable and the IPA
(libinproctrace.so) to be located in the same directory (see [1]). When
using the native-gdbserver board, because _download returns the original
file path, the executable does not end up in the same directory as the
library, and it fails to execute.
In more general terms, with the recent changes, the testsuite now
assumes that when it does
${board}_download <source path 1> <destination path 1>
${board}_download <source path 2> <destination path 2>
where the destination paths are relative (generally just the file name),
both files will end up in the same base directory. That assumption does
not hold for the current implementation in gdbserver-base.exp.
The proper fix would be to make native-gdbserver non-remote, so that
gdb_remote_download would not call DejaGnu's remote_download (see [2]).
We could then get rid of ${board}_download in gdbserver-base.exp.
However, that will likely take some time to complete. In the mean time,
in order to make the fast tracepoint tests pass, we can simply copy the
file to the standard output directory. Basically, it just mimics what
gdb_remote_download would do if the board wasn't flagged as remote.
Note that I missed these failures originally because I had a
libinproctrace.so in /usr/local/lib. So, even though libinproctrace.so
wasn't copied to the test output directory, it did find the one in
/usr/local/lib. It would be nice to find a way to protect against this,
as it could easily happen again...
Regtested with unix, native-gdbserver and native-extended-gdbserver, and
didn't see anything notable, except the ftrace tests now passing for
native-gdbserver.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=6e774b13c3b81ac2599812adf058796948ce7e95
[2] https://sourceware.org/ml/gdb-patches/2016-04/msg00112.html
gdb/testsuite/ChangeLog:
* boards/gdbserver-base.exp (${board}_download): Copy source file to
standard output directory.
This patch fixes the following failure:
FAIL: gdb.trace/trace-condition.exp: ftrace: -(21 << 1) == -42: check 10
frames were collected.
This was due to aarch64_emit_sub using the wrong order in its operands, so the
operation would end up being 42 - 0 rather than 0 - 42.
This patch also fixes the order of aarch64_emit_add for clarity.
The test case for emit_sub is fixed so that the proper order of
the operands is needed for the test to pass.
Tested on aarch64-native-extended-gdbserver.
Note: trace-condition.exp was broken a bit so I had to modify it to run
the test. A fix is coming for that in another patch.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_emit_add): Switch x1 and x0.
(aarch64_emit_sub): Likewise.
gdb/testsuite/ChangeLog:
* gdb.trace/trace-condition.exp (foreach): Fix emit_sub testcase.
On systems with a newer version of GCC the gdb.btrace/instruction_history.exp
test fails to build like this:
Running .../gdb.btrace/instruction_history.exp ...
gdb compile failed, .../gdb.btrace/instruction_history.c:
In function 'main': .../gdb.btrace/instruction_history.c:24:3: warning:
implicit declaration of function 'loop' [-Wimplicit-function-declaration]
loop ();
^
Declare loop to fix it.
testsuite/
* gdb.btrace/instruction_history.c (loop): Add declaration.
This obvious patch replaces "ond" wiht "cond" as the test prefix for
conditional tests.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp (proc): Change test prefix from "ond" to "cond".
There are a few small changes needed to make it work with a real remote
target.
- Remove the [is_remote target] check.
- Remove soname setting when building the lib, it's done by default now
anyway.
- In the compilation of the executable, pass the shared lib using the
shlib option, so that RPATH is set.
- Download the program to the target using gdb_remote_download, and
record the remote path. Remove loading of the program using
gdb_load_shlibs, which was not really appropriate anyway.
- Run the remote path through readlink (see comment in the code).
- Start gdbserver with the remote path.
Also, don't set executable and objfile variables, as they are unused.
Tested with native, native-gdbserver, native-extended-gdbserver, and a
remote gdbserver.
gdb/testsuite/ChangeLog:
* gdb.server/solib-list.exp: Remove is_remote check.
Pass shlib= to gdb_compile. Don't link shared library with
-soname. Call gdb_remote_download instead of gdb_load_shlibs.
Run binary filename through "readlink -f" on the target.
Commit 7817ea4614 (Improve gdb_remote_download, remove gdb_download)
caused:
FAIL: gdb.server/solib-list.exp: non-stop 0: target extended-remote (timeout)
FAIL: gdb.server/solib-list.exp: non-stop 0: continue (the program is no longer running)
FAIL: gdb.server/solib-list.exp: non-stop 0: p libvar
FAIL: gdb.server/solib-list.exp: non-stop 1: target extended-remote (timeout)
FAIL: gdb.server/solib-list.exp: non-stop 1: continue (the program is no longer running)
FAIL: gdb.server/solib-list.exp: non-stop 1: p libvar
gdb.log shows:
system interpreter is: /lib64/ld-linux-x86-64.so.2
...
spawn ../gdbserver/gdbserver --once :2347 /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2 /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/solib-list
Process /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2 created; pid = 18637
Cannot exec /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2: No such file or directory.
...
The test copied the interpreter to the outputs directory, however
ld-linux-x86-64.so.2 is a relative symlink that when copied points
nowhere:
$ ls -l testsuite/outputs/gdb.server/solib-list/
total 52
-rwxrwxr-x. 1 pedro pedro 13450 Apr 7 10:52 gdb.log
-rw-rw-r--. 1 pedro pedro 1512 Apr 7 10:52 gdb.sum
lrwxrwxrwx. 1 pedro pedro 10 Apr 7 11:39 ld-linux-x86-64.so.2 -> ld-2.22.so
-rwxrwxr-x. 1 pedro pedro 9464 Apr 7 11:39 solib-list
-rw-rw-r--. 1 pedro pedro 3472 Apr 7 11:39 solib-list-lib.c.o
-rw-rw-r--. 1 pedro pedro 2760 Apr 7 11:39 solib-list.o
-rwxrwxr-x. 1 pedro pedro 9232 Apr 7 11:39 solib-list.so
The copying comes from gdbserver_spawn ->
gdbserver_download_current_prog -> gdb_remote_download.
There's actually no need to download the interpreter to the target -
it's part of the target system/environment. So fix this by making the
test just not use gdb_load (and gdb_file_cmd as consequence) at all,
and instead pass the interpreter filename to gdbserver as an argument.
gdb/testsuite/ChangeLog:
2016-04-08 Pedro Alves <palves@redhat.com>
* gdb.server/solib-list.exp: Don't use gdb_load. Instead pass the
interpreter filename as argument to gdbserver_spawn.
* lib/gdbserver-support.exp (gdbserver_download_current_prog):
Return empty if $last_loaded_file does not exist.
on CentOS-7.2 I get
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit.exp ...
FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach (the program is no longer running)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit-so.exp ...
FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
since:
85af34ee0211eedf8d30a5c44dfc59dddf8b512a is the first bad commit
commit 85af34ee0211eedf8d30a5c44dfc59dddf8b512a
Author: Pedro Alves <palves@redhat.com>
Date: Thu Mar 31 19:28:47 2016 +0100
Add regression test for PR gdb/19858 (JIT code registration on attach)
The compiled code's .debug_line is wrong (for the simplistic approach of GDB
to put a breakpoint on the first address belonging to that source line) and so
GDB misses the breakpoint at the last line:
WAIT_FOR_GDB; return 0; /* gdb break here 2 */
Most of the patch is just about reindentation, no changes there.
gdb/testsuite/ChangeLog
2016-04-08 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compatibility with gcc-4.8.5-4.el7.x86_64.
* gdb.base/jit-main.c: Use exit after usage.
$ GDBHISTFILE=/tmp/gdbhistfile runtest gdb.base/gdbhistsize-history.exp gdb.base/gdbinit-history.exp
Running ./gdb.base/gdbinit-history.exp ...
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=1000: show commands
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=foo: show commands
Running ./gdb.base/gdbhistsize-history.exp ...
FAIL: gdb.base/gdbhistsize-history.exp: histsize=: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=20: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize= 20 : show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=not_an_integer: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=10zab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5ab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=99999999999999999999999999999999999: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=50: show commands
This happens for my setup due to my:
$ grep GDB ~/.bashrc
export GDBHISTFILE="$HOME/.gdb_history"
gdb/testsuite/ChangeLog
2016-04-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gdbhistsize-history.exp: Save and unset GDBHISTFILE and
GDBHISTSIZE prior to the tests.
* gdb.base/gdbinit-history.exp: Likewise.
Commit 6e774b13c3 (Make ftrace tests work with remote targets) made
a few gdb.compile/compile.exp tests disappear:
-PASS: gdb.compile/compile.exp: call shared library function
-PASS: gdb.compile/compile.exp: expect 1
-PASS: gdb.compile/compile.exp: modify shared library variable
-PASS: gdb.compile/compile.exp: expect 15
This is because the test uses ldflags instead of using the shlib
option, so it misses linking with -rpath, resulting in:
(gdb) run
Starting program: .../compile/compile-shlib
.../compile/compile-shlib: error while loading shared libraries: compile-shlib.so: cannot open shared object file: No such file or directory
[Inferior 1 (process 18014) exited with code 0177]
We were missing a gdb_load_shlibs call, which is needed for remote
testing.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.compile/compile.exp: Use gdb_compile with "shlib=" option
instead of build_executable. Use gdb_load_shlibs.
I see the following fail on aarch64-linux
break void_func
Breakpoint 2 at 0x4007a0: file gdb/testsuite/gdb.reverse/finish-reverse.c, line 44.
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: set breakpoint on void_func
continue
Continuing.
Breakpoint 2, void_func () at gdb/testsuite/gdb.reverse/finish-reverse.c:44^M
44 void_test = 1; /* VOID FUNC */^M
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: continue to breakpoint: void_func
break *void_func^M
Note: breakpoint 2 also set at pc 0x4007a0.^M
Breakpoint 3 at 0x4007a0: file gdb/testsuite/gdb.reverse/finish-reverse.c, line 44.
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: set breakpoint at void_func's entry
reverse-finish^M
Run back to call of #0 void_func () at gdb/testsuite/gdb.reverse/finish-reverse.c:44
main (argc=1, argv=0x7ffffffb78) at gdb/testsuite/gdb.reverse/finish-reverse.c:98
98 void_func (); /* call to void_func */^M
(gdb) FAIL: gdb.reverse/finish-reverse-bkpt.exp: reverse-finish from void_func trips breakpoint at entry
The test assumes that brekapoints on "void_func" and "*void_func" are
set on different places because of function prologue. However, on
aarch64-linux, there is no prologue in void_func, so two breakpoints
are set at the same place (0x4007a0).
(gdb) disassemble void_func
Dump of assembler code for function void_func:
0x00000000004007a0 <+0>: adrp x0, 0x410000
0x00000000004007a4 <+4>: add x0, x0, #0xc14
0x00000000004007a8 <+8>: mov w1, #0x1
0x00000000004007ac <+12>: str w1, [x0]
0x00000000004007b0 <+16>: ret
The fix to this problem is to single step forward before setting
breakpoint on *void_func.
gdb/testsuite:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/finish-reverse-bkpt.exp: Use temporary breakpoint.
Execute "si" command.
I see the fail on aarch64-linux,
(gdb) reverse-next
Breakpoint 2, callee () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c:26^M
26 myglob++; return 0; /* ARRIVED IN CALLEE */
(gdb) FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: reverse-next over call trips user breakpoint at function entry
The test expects program stops at line 25, but program stops at line 26.
(gdb) maintenance info line-table
objfile: /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.reverse/next-reverse-bkpt-over-sr/next-reverse-bkpt-over-sr ((struct objfile *) 0x613000002880)
compunit_symtab: ((struct compunit_symtab *) 0x621000121760)
symtab: /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c ((struct symtab *) 0x6210001217e0)
linetable: ((struct linetable *) 0x6210001520d0):
INDEX LINE ADDRESS
0 25 0x0000000000400890
1 26 0x0000000000400890
2 27 0x00000000004008b0
(gdb) disassemble callee
Dump of assembler code for function callee:
0x0000000000400890 <+0>: adrp x0, 0x410000
0x0000000000400894 <+4>: add x0, x0, #0xcac
the line-table show that the first instruction of function callee is
mapped line 25 and 26. I am not sure the line-table is correct, but
it is not the point of this test. The goal of this test is to test
program hits the breakpoint on the first instruction of function after
'reverse-next', so I change this test to expect the breakpoint number
the program hits.
gdb/testsuite:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/next-reverse-bkpt-over-sr.exp: Match the breakpoint
number instead of the comments on some line.
This patch implements a test that ensures that with "set print object
on", -var-create returns "<optimized out>" for an optimized out pointer
to structure, rather than throwing an error, while also ensuring that
any attempt to dereference the pointer *will* throw an error.
It uses the dwarf assembler to construct the appropriate debug info
to represent a pointer-to-struct in the program as optimized out,
and then accesses that pointer in various ways. The test uses both
the console interpreter and the MI interpreter.
gdb/testsuite/ChangeLog:
2016-04-06 Don Breazeal <donb@codesourcery.com>
* gdb.dwarf2/dw2-opt-structptr.c: New test program.
* gdb.dwarf2/dw2-opt-structptr.exp: New test script.
Following, commit
6e774b13c3 Make ftrace tests work with remote targets
the test gdb.threads/dlopen-libpthread.exp started to fail with:
ERROR: error copying "/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.threads/dlopen-libpthread.so": no such file or directory
This is because the library path is not computed using
standard_output_file, so we try to gdb_load_shlibs an unexisting file.
gdb/testsuite/ChangeLog:
* gdb.threads/dlopen-libpthread.exp: Set binfile_lib using
standard_output_file. Remove unused binfile variable.
Starting with this commit:
commit e7ea3ec7c6
Author: Catalin Udma <catalin.udma@freescale.com>
Date: Mon Feb 29 16:16:19 2016 +0200
python: Use console format for output of gdb.execute command
the python script would use console format for gdb.execute output.
This patch fixes py-mi-objfile to expect the console format when is
checking for gdb.execute printing.
gdb/testsuite/ChangeLog:
2016-04-05 Catalin Udma <catalin.udma@freescale.com>
* gdb.python/py-mi-objfile-gdb.py: Use "list main" command.
* gdb.python/py-mi-objfile.exp: Match "list main" output
in console format.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
In commit 6e774b13c3, I forgot to update this test.
gdb/testsuite/ChangeLog:
* gdb.arch/ftrace-insn-reloc.exp: Check for IPA basename instead of
absolute.
When we build a shared library for testing, it is built differently
whether it is meant for the local system or a remote one. When it is
for the local system, the library is built with no SONAME. So when the
executable is built, roughly in this way:
$ gcc testfile.c /path/to/library.so
the executable will contain an absolute reference to the library. For
example:
$ readelf -a testsuite/gdb.python/py-shared | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.python/py-shared-sl.sl]
When testing is done remotely, the absolute path obviously doesn't work.
Therefore, we build the library with an SONAME:
$ readelf -a testsuite/gdb.python/py-shared-sl.sl | grep SONAME
0x000000000000000e (SONAME) Library soname: [py-shared-sl.sl]
which ends up in the executable's NEEDED field:
$ readelf -a testsuite/gdb.python/py-shared | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [py-shared-sl.sl]
The executable and the library are then uploaded side-by-side on the
remote system. To allow the dynamic linker to find the shared library,
we have to add the special RPATH value $ORIGIN, which tells it to search
in the executable's directory:
$ readelf -a testsuite/gdb.python/py-shared | grep ORIGIN
0x000000000000000f (RPATH) Library rpath: [$ORIGIN]
The problem with the IPA library is that it doesn't have an SONAME,
making it very difficult to do testing on a remote board. When a
test executable is linked with it, it contains an absolute reference to
the library path. Therefore, unless the paths on the target are the
same as on the build system, it won't work.
To make it possible for tests using the IPA library to run test on
remote boards, I suggest adding an SONAME to libinproctrace.so. I don't
think it should be a big problem for users. All the libraries installed
on my system have an SONAME, so it should be fine if libinproctrace.so
does too.
As a consequence, native testing does not work anymore, since
executables do not contain the absolute path to the library anymore. To
keep them working, we can have gdb_load_shlibs copy the library to the
test directory when testing natively. That's done by modifying
gdb_load_shlibs. We also have to add RPATH=$ORIGIN to executables, even
when testing natively.
I think it's a good change in general, as it reduces the differences
between testing a native and a remote target. To further reduce those
differences, we can also always build test shared libraries with an
SONAME.
ftrace.exp and ftrace-lock.exp need to be modified slightly. The code
checks that the IPA library is loaded using the absolute path on the
build machine. That obviously doesn't work if the test is done
remotely, as the path will be different. I changed the tests to only
search for the library basename (e.g. libinproctrace.so).
gdb/gdbserver/ChangeLog:
* Makefile.in ($(IPA_LIB)): Set SONAME of the IPA lib.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace-lock.exp: Check for IPA basename instead of
absolute.
* gdb.trace/ftrace.exp: Likewise.
* lib/gdb.exp (gdb_compile): Set rpath $ORIGIN for non-remote
targets as well.
(gdb_compile_shlib): Set SONAME for non-remote targets as well.
(gdb_load_shlibs): Copy libraries to test directory when testing
natively. Only set solib-search-path if testing remotely.
* lib/mi-support.exp (mi_load_shlibs): Likewise.
This patch removes gdb_download in favor of gdb_remote_download, since
they are very close in functionality. Also, in preparation for the
following patch about shared library handling during tests, it improves
gdb_remote_download so that it uses standard_output_file for any
destination board that is local, not only host.
If the destination board is remote, gdb_remote_download will use the
standard remote_download from DejaGnu, resulting in the file being
transferred on the remote system.
If the destination is local, gdb_remote_download will copy the file to
the standard test directory (found using standard_output_file). Tcl's
file copy seems to handle gracefully cases where the source file is the
same as the destination, so I don't think it's necessary to check for
that case ourselves, as a previous version of the patch did.
I'd prefer to keep the name gdb_download instead of gdb_remote_download,
since I don't like the fact that gdb_remote_download implies that the
destination is remote, when it's not always the case. However,
gdb_remote_download is used at many more places than gdb_download, so
it's easier to reuse that. Also, since it's a wrapper around DejaGnu's
remote_download, it might be better to keep that name. I don't know.
I ran the testsuite native, with native-gdbserver and with a
remote gdbserver, and didn't see any related failure.
gdb/testsuite/ChangeLog:
* gdb.base/jit-so.exp: Use gdb_remote_download instead of
gdb_download. Use it even if the target is not remote.
* gdb.base/jit.exp (compile_jit_test): Likewise.
* lib/gdb.exp (gdb_remote_download): Copy files to the standard
output directory if the destination board is local, otherwise use
the standard remote_download from DejaGnu.
(gdb_download): Remove.
(gdb_load_shlibs): Use gdb_remote_download instead of
gdb_download.
* lib/gdbserver-support.exp (gdbserver_download_current_prog):
Use gdb_remote_download instead of gdb_download. Use it even if
the target is not remote.
* lib/mi-support.exp (mi_load_shlibs): Use gdb_remote_download
instead of gdb_download.
The libraries are never downloaded to the target for the first test
(test_insert_delete_modify), so the executable can't run properly.
I also added some with_test_prefix to help differentiate between the
different test case phases.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-breakpoint-changed.exp: Add some with_test_prefix.
(test_insert_delete_modify): Call mi_load_shlibs before trying to
run.
This patch adds support for TYPE_CODE_ENUM values to be supplied
as right-hand side operand of the BINOP_REPEAT (@) operator. The
following should now work:
enum {
sz = 17
};
int
main ()
{
int arr[sz + 1] = { 0 };
return 0; /* line 9 here */
}
(gdb) b 9
(gdb) r
(gdb) p arr@sz
$1 = {0 <repeats 17 times>}
(gdb)
A couple of tests is also included in this patch to demonstrate that it is
working as intended.
gdb/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
the type of BINOP_REPEAT's second operand.
gdb/testsuite/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* gdb.base/printcmds.exp: Add artificial arrays tests.
This test would fail without the previous gdb/jit.c fix:
(gdb) attach 23031
Attaching to program: .../build/gdb/testsuite/outputs/gdb.base/jit/jit-main, process 23031
[...]
207 WAIT_FOR_GDB; i = 0; /* gdb break here 1 */
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: attach
set var wait_for_gdb = 0
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: set var wait_for_gdb = 0
info function ^jit_function
All functions matching regular expression "^jit_function":
(gdb) FAIL: gdb.base/jit.exp: attach: one_jit_test-2: info function ^jit_function
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit-main.c: Include unistd.h.
(ATTACH): Define to 0 if not already defined.
(wait_for_gdb, mypid): New globals.
(WAIT_FOR_GDB): New macro.
(MAIN): Set an alarm. Store the process's pid. Wait for GDB at
some breakpoint locations.
* gdb.base/jit.exp (clean_reattach, continue_to_test_location):
New procedures.
(one_jit_test): Add REATTACH parameter, and handle it. Use
continue_to_test_location.
(top level): Test attach, and adjusts calls to one_jit_test.
This testcase compiles the same program and library differently
multiple times using the same file names. Make them unique, to make
it easier to debug test problems.
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit.exp (compile_jit_test): Add intro comment. Add
BINSUFFIX parameter, and handle it.
(top level): Adjust calls compile_jit_test.
When gdb is started in MI mode, the output of gdb.execute
command is in MI-format in case when it is executed from python stop
handler while for all other cases the output is in console-format.
To assure consistent output format, this is fixed by using the console
format for all python gdb command executions.
PR python/19743
gdb/ChangeLog:
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* python/python.c (execute_gdb_command): Use console uiout
when executing gdb command.
* utils.c (restore_ui_out_closure): New structure.
(do_restore_ui_out): New function.
(make_cleanup_restore_ui_out): Likewise.
* utils.h (make_cleanup_restore_ui_out): Declare.
gdb/testsuite/ChangeLog:
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* gdb.python/py-mi-events-gdb.py: New file.
* gdb.python/py-mi-events.c: New file.
* gdb.python/py-mi-events.exp: New file.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
Nowadays, functions fprintf, printf and malloc are executed in
gdb.reverse/until-reverse.c, so that it takes much time to record
instructions inside them. This may cause timeout, and we had several
fixes to bump the timeout,
https://sourceware.org/ml/gdb-patches/2012-02/msg00038.htmlhttps://sourceware.org/ml/gdb-patches/2015-08/msg00186.html
also I still see this on arm-linux,
continue
Continuing.
Do you want to auto delete previous execution log entries when record/replay buffer becomes full (record full stop-at-limit)?([y] or n) n
Process record: stopped by user.
Program stopped.
0xf77021e6 in __linkin_atfork (newp=0xf7751748 <atfork_mem>) at ../nptl/sysdeps/unix/sysv/linux/register-atfork.c:117
117 ../nptl/sysdeps/unix/sysv/linux/register-atfork.c: No such file or directory.
(gdb) FAIL: gdb.reverse/until-precsave.exp: run to end of main (got interactive prompt)
however, I can't figure out how these functions (fprintf, printf and
malloc) are related to the test itself. marker1 is a function from
shared library too so we don't need these complicated libc functions
at all. IMO, recording the instructions in these libc functions has
nothing to do with the test itself except slow down the test. This
patch is to remove the usage of fprintf and printf, and also move
malloc to a dead code path.
gdb/testsuite:
2016-03-30 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/until-precsave.exp: Match function name only.
* gdb.reverse/until-reverse.c (main): Don't call fprintf nor printf.
Move malloc to a condition block.
* gdb.reverse/until-reverse.exp: Match function name only.
Also adds s390 support to gdb.trace testsuite.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_tracepoints): New function.
(struct linux_target_ops): Fill supports_tracepoints hook.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for s390.
* gdb.trace/mi-trace-frame-collected.exp: Expect 4 registers on s390.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for s390, add gpr0num
variable for GPR 0 instead of assuming it is register 0.
* gdb.trace/trace-common.h: Add s390 fast tracepoint placeholder.
* lib/trace-support.exp: Add s390 registers.
Pass "debug" to prepare_for_testing otherwise, some tests fail.
gdb/testsuite:
2016-03-29 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-neon.exp: Pass debug to prepare_for_testing.
I happen to see a quotation mark is missing the following test,
gdb_test "break $end_location" \
"Breakpoint $decimal at .* line $end_location\." \
set breakpoint at end of main"
so the test result is
PASS: gdb.reverse/break-reverse.exp: set
This patch is to add the missing quotation mark back, and the test
result becomes
PASS: gdb.reverse/break-reverse.exp: set breakpoint at end of main
gdb/testsuite:
2016-03-24 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/break-reverse.exp: Add quotation mark in the
test message.
Simon Marchi
Yao Qi
Keven Boell
Bernhard Heckel
Doug Evans
Martin Galvan
Luis Machado
Antoine Tremblay
Markus Metzger
Simon Marchi
Pedro Alves
Jan Kratochvil
Don Breazeal
Catalin Udma
Artemiy Volkov
Marcin Kościelnicki