It was like printf, which means you can't use bfd_set_error_handler to
hook in a function to do something and then call the original handler.
The patch also deletes some unused functions and makes pointers local.
bfd/
* bfd-in.h: Include stdarg.h.
* bfd.c (bfd_error_handler_type): Make like vprintf.
(_bfd_error_internal): Rename from _bfd_error_handler. Make static.
(error_handler_internal): New function, split out from..
(_bfd_default_error_handler): ..here. Rename to _bfd_error_handler.
(bfd_set_error_handler): Update.
(bfd_get_error_handler, bfd_get_assert_handler): Delete.
(_bfd_assert_handler): Make static.
* coffgen.c (null_error_handler): Update params.
* elf-bfd.h (struct elf_backend_data <link_order_error_handler>):
Don't use bfd_error_handler_type.
* elf64-mmix.c (mmix_dump_bpo_gregs): Likewise.
* elfxx-target.h (elf_backend_link_order_error_handler): Default
to _bfd_error_handler.
* libbfd-in.h (_bfd_default_error_handler): Don't declare.
(bfd_assert_handler_type): Likewise.
(_bfd_error_handler): Update.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
ld/
* ldlang.c (ignore_bfd_errors): Update params.
The re-writing logic in _bfd_coff_final_link() overwrote the ".file"
part of the symbol table entry, due to not coping with the auxiliary
entry generated in all cases.
Note that while I would have wanted to add a test case,
(a) I didn't spot any one testing the base functionality here, and
(b) I wasn't able to figure out proper conditionals to use in e.g.
ld-elf/elf.exp to check for the necessary PE/PE+ support (which
varies by target).
PR binutils/18087
gas * doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or
.debug_info sections to be compressed.
binu * doc/binutils.texi: Note that when objcopy compresses debug
sections the compression is only performed if it makes the section
smaller.
bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a
debug section's name if the section was actually compressed.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
* compress.c (bfd_init_section_compress_status): Do not compress
the section if doing so would make it bigger. In such cases leave
the section alone and return COMPRESS_SECTION_NONE.
PR binutils/18025
* coffgen.c (coff_find_nearest_line_with_names): If the dwarf2
lookup fails, check for an address bias in the dwarf info, and if
one exists, retry the lookup with the biased value.
* dwarf2.c (_bfd_dwarf2_find_symbol_bias): New function.
Determines if a bias exists bewteen the addresses of functions
based on DWARF information vs symbol table information.
* libbfd-in.h (_bfd_dwarf2_find_symbol_bias): Prototype.
* libbfd.h: Regenerate.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Initialise the parts of the
line number cache that would not be initialised by the copy from
the new line number table.
(coff_classify_symbol): Allow for _bfd_coff_internal_syment_name
returning NULL.
* coffgen.c (coff_get_normalized_symbols): Get the external
symbols before allocating space for the internal symbols, in case
the get fails.
* elf.c (_bfd_elf_slurp_version_tables): Only allocate a verref
array if one is needed. Likewise with the verdef array.
* peXXigen.c (_bfd_XXi_swap_sym_in): Replace abort()'s with error
messages.
(_bfd_XXi_swap_aux_in): Make sure that all fields of the aux
structure are initialised.
(pe_print_edata): Avoid reading off the end of the data buffer.
when displaying the contents of corrupt files.
PR binutils/17521
* coff-i386.c (NUM_HOWTOS): New define.
(RTYPE2HOWTO): Use it.
(coff_i386_rtype_to_howto): Likewise.
(coff_i386_reloc_name_lookup): Likewise.
(CALC_ADDEND): Check that reloc r_type field is valid.
* coff-x86_64.c (NUM_HOWTOS): New define.
(RTYPE2HOWTO): Use it.
(coff_amd64_rtype_to_howto): Likewise.
(coff_amd64_reloc_name_lookup): Likewise.
(CALC_ADDEND): Check that reloc r_type field is valid.
* coffcode.h (coff_slurp_line_table): Check for symbol table
indexing underflow.
(coff_slurp_symbol_table): Use zalloc to ensure that all table
entries are initialised.
* coffgen.c (_bfd_coff_read_string_table): Initialise unused bits
in the string table. Also ensure that the table is 0 terminated.
(coff_get_normalized_symtab): Check for symbol table indexing
underflow.
* opncls.c (bfd_alloc): Catch the case where a small negative size
can result in only 1 byte being allocated.
(bfd_alloc2): Use bfd_alloc.
* pe-mips.c (NUM_HOWTOS): New define.
(coff_mips_reloc_name_lookup): Use it.
(CALC_ADDEND): Check that reloc r_type field is valid.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Initialise unused entries
in the DataDirectory.
(pe_print_idata): Avoid reading beyond the end of the data block
wen printing strings.
(pe_print_edata): Likewise.
Check for table indexing underflow.
* peicode.h (pe_mkobject): Initialise the pe_opthdr field.
(pe_bfd_object_p): Allocate and initialize enough space to hold a
PEAOUTHDR, even if the opt_hdr field specified less.
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
PR binutils/17512
* coffgen.c (_bfd_coff_get_external_symbols): Do not try to load a
symbol table bigger than the file.
* elf.c (bfd_elf_get_str_section): Do not try to load a string
table bigger than the file.
* readelf.c (process_program_headers): Avoid memory exhaustion due
to corrupt values in a dynamis segment header.
(get_32bit_elf_symbols): Do not attempt to read an over-large
section.
(get_64bit_elf_symbols): Likewise.
* peicode.h (coff_real_object_p): Add prototype.
(FILHDR): Defined for COFF_IMAGE_WITH_PE as
external_PEI_IMAGE_hdr structure.
(coff_swap_filehdr_in): Handle variable header-size.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Just handle amount
of directory-entiries as specified in pe-header.
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* coff-i386.c (bfd_target): Add section flag SEC_EXCLUDE.
Allow BFD_COMPRESS and BFD_DECOMPRESS flags.
* coff-x86_64.c: Likewise.
* coffcode.h (DOT_ZDEBUG): New define.
(sec_to_styp_flags): Check for .zdebug.
(styp_to_sec_flags): Likewise.
* coffgen.c (make_a_section): Handle .debug_* section
compression/decompression flags.
* cofflink.c (mark_relocs): Ignore relocations
for a section, which isn't marked as used.
(_bfd_coff_link_input_bfd): Add support of compressed
debug sections.
* compress.c (decompress_contents): Loop as long
as there is input available and there is room for
output.
* bfd/pe-arm.c: Add .zdebug_ partial match entry.
* pe-i386.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c (_bfd_XXi_swap_aouthdr_out): Don't clear all
data-directories as this might destroy content.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator):
define as coff_find_nearest_line_discriminator.
* libcoff-in.h (coff_find_nearest_line_discriminator): New
* libcoff.h: Regenerated.
* coff-x86_64.c: Likewise.
* coffgen.c (coff_find_nearest_line_discriminator): New function.
prototype.
ChangeLog binutils
2012-10-18 Kai Tietz <ktietz@redhat.com>
* objdump.c (dump_bfd): Call dump headers after
call of slurp_symtab.
ChangeLog ld
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* NEWS: Menition new feature.
* scripttempl/pep.sc: Add zdebug sections.
* scripttempl/pe.sc: L
bfd/
* bfd.c (bfd_find_nearest_line_discriminator): New macro.
* coff-rs6000.c: Init _bfd_find_nearest_line_discriminator.
* coff64-rs6000.c: Likewise.
* dwarf2.c (struct line_info): Add discriminator field.
(add_line_info): Fill in new discriminator field.
(decode_line_info): Record discriminator information instead
of ignoring it.
(lookup_address_in_line_info_table): Return discriminator field if
requested.
(comp_unit_find_nearest_line): Add discriminator argument.
(find_line): Likewise.
(_bfd_dwarf2_find_nearest_line): Likewise.
(_bfd_dwarf2_find_line): Likewise.
* elf-bfd.h (_bfd_elf_find_nearest_line_discriminator): New.
(_bfd_elf_find_line_discriminator): Likewise.
(_bfd_generic_find_nearest_line_discriminator): Likewise. Defined.
* elf.c (_bfd_elf_find_nearest_line): Change to a wrapper
that invokes _bfd_elf_find_nearest_line_discriminator with correct
arguments.
(_bfd_elf_find_nearest_line_discriminator): New.
(_bfd_elf_find_line): Change to a wrapper
that invokes _bfd_elf_find_line_discriminator with correct
arguments.
(_bfd_elf_find_line_discriminator): New.
* coffgen.c (coff_find_nearest_line_with_names): Handle
new discriminator argument.
* elf32-arm.c (elf32_arm_find_nearest_line): Likewise.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Likewise.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Likewise.
* libbfd-in.h (_bfd_dwarf2_find_nearest_line): Add discriminator
argument.
(_bfd_dwarf2_find_line): Likewise.
(_bfd_generic_find_nearest_line_discriminator): New.
* libbfd.c (_bfd_generic_find_nearest_line_discriminator): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Initialize
_bfd_find_nearest_line_discriminator with
_bfd_generic_find_nearest_line_discriminator.
(bfd_target): Add _bfd_find_nearest_line_discriminator.
binutils/
* addr2line.c (find_address_in_section): Invoke
bfd_find_nearest_line_discriminator to get the discriminator.
(find_offset_in_section): Likewise.
(translate_addresses): Print discriminator if it is non-zero.
* objdump.c (show_line): Invoke
bfd_find_nearest_line_discriminator to get the discriminator,
and keep track of prev_discriminator. Print discriminator
if it is non-zero.
(disassemble_data): Initialize prev_discriminator.
(dump_reloc_set): Invoke bfd_find_nearest_line_discriminator
to get the discriminator, and keep track of last_discriminator.
Print discriminator if it is non-zero.
(where relocatable objects are in ELF format) so far led to all local (aka
static) symbols to be discarded, making debugging quite a bit more difficult
(like Linux, Xen builds an internal symbol lookup table from nm output
generated on the binary produced by an earlier linking pass). Therefore, this
patch arranges to insert all (relevant) local symbols from non-COFF objects
into the final executable's symbol table between those coming from COFF input
files and the global ones.
bfd/
2011-11-02 Jan Beulich <jbeulich@suse.com>
* coffgen.c (coff_write_alien_symbol): Make public. Add 'struct
internal_syment *' parameter. Extend 'dummy' to an array with two
elements. Set n_numaux early. Handle BSF_FILE.
(coff_write_symbols): Pass NULL as new third argument to
coff_write_alien_symbol().
* cofflink.c (_bfd_coff_final_link): Don't use COFF-specific
obj_raw_syment_count() on non-COFF input BFD. Insert local symbols
from non-COFF input BFDs.
* libcoff-in.h (coff_write_alien_symbol): Declare.
* libcoff.h (coff_write_alien_symbol): Re-generate.
(record_thumb_to_arm_glue, bfd_arm_process_before_allocation):
Change member name class to symbol_class.
* bfd/coff-i960.c (coff_i960_relocate_section) Rename variable
class to class_val. Change member name class to symbol_class.
* bfd/coff-rs6000.c (_bfd_xcoff_swap_aux_in)
(_bfd_xcoff_swap_aux_out): Rename arguments class to in_class.
* bfd/coff-stgo32.c (adjust_aux_in_post)
(adjust_aux_out_pre, adjust_aux_out_post): Rename arguments class
to in_class.
* bfd/coff64-rs6000.c (_bfd_xcoff64_swap_aux_in)
(_bfd_xcoff64_swap_aux_out): Rename arguments class to in_class.
* bfd/coffcode.h (coff_pointerize_aux_hook): Rename variable class
to n_sclass.
* bfd/coffgen.c (coff_write_symbol, coff_pointerize_aux): Rename
variables named class to n_sclass. (coff_write_symbols): Rename
variable class to sym_class. (bfd_coff_set_symbol_class): Rename
argument class to symbol_class.
* bfd/cofflink.c (_bfd_coff_link_hash_newfunc)
(coff_link_add_symbols, _bfd_coff_link_input_bfd)
(_bfd_coff_write_global_sym, _bfd_coff_generic_relocate_section):
Update code to use renamed members.
* bfd/coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Rename
argument class to in_class.
* bfd/libcoff-in.h (struct coff_link_hash_entry, struct
coff_debug_merge_type) Renamed members class to symbol_class and
type_class.
* bfd/libcoff.h Regenerated.
* bfd/peXXigen.c: (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out):
Rename argument class to in_class.
* bfd/pef.c (bfd_pef_parse_imported_symbol): Update code to use
renamed members.
* bfd/pef.h (struct bfd_pef_imported_symbol): Changed name of
member class to symbol_class.
* binutils/ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class)
(ieee_read_reference): Rename variables named class to cxxclass.
* gas/config/tc-arc.c (struct syntax_classes): Rename member class
to s_class. (arc_extinst): Rename variable class to
s_class. Update code to use renamed members.
* gas/config/tc-mips.c (insn_uses_reg): Rename argument class to
regclass.
* gas/config/tc-ppc.c (ppc_csect, ppc_change_csect, ppc_function)
(ppc_tc, ppc_is_toc_sym, ppc_symbol_new_hook, ppc_frob_label)
(ppc_fix_adjustable, md_apply_fix): Update code to use renamed
members.
* gas/config/tc-ppc.h (struct ppc_tc_sy): Change name of member
from class to symbol_class. (OBJ_COPY_SYMBOL_ATTRIBUTES): Update
code to use renamed members.
* gas/config/tc-score.c (s3_adjust_paritybit): Rename argument
class to i_class.
* gas/config/tc-score7.c (s7_adjust_paritybit): Rename argument
class to i_class.
* gprof/corefile.c (core_create_function_syms): Rename variable
class to cxxclass.
* include/coff/ti.h (GET_LNSZ_SIZE, PUT_LNSZ_SIZE): Updated name
of class variable to in_class to match changes in function that
use this macro.
* include/opcode/ia64.h (struct ia64_operand): Renamed member
class to op_class
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols)
(gld${EMULATION_NAME}_try_needed): Rename variable class to
link_class
* opcodes/ia64-dis.c (print_insn_ia64): Update code to use renamed
member.
* opcodes/m88k-dis.c (m88kdis): Rename variable class to in_class.
* opcodes/tic80-opc.c (tic80_symbol_to_value)
(tic80_value_to_symbol): Rename argument class to symbol_class.
keyword in c++.
* bfd/aoutx.h (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol.
* bfd/coffgen.c (coff_make_empty_symbol)
(coff_bfd_make_debug_symbol): Rename variable new to new_symbol.
* bfd/cpu-ia64-opc.c (ext_reg, ins_imms_scaled): Rename variable
new to new_insn.
* bfd/doc/chew.c (newentry, add_intrinsic): Rename variable new to
new_d.
* bfd/ecoff.c (_bfd_ecoff_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/elf32-m68k.c (elf_m68k_get_got_entry_type): Rename argument
new to new_reloc.
* bfd/hash.c (bfd_hash_lookup): Rename variable new to new_string.
* bfd/ieee.c (ieee_make_empty_symbol): Rename variable new to
new_symbol.
* bfd/linker.c (bfd_new_link_order): Rename variable new to
new_lo.
* bfd/mach-o.c (bfd_mach_o_sizeof_headers): Rename variable new to
symbol.
* bfd/oasys.c (oasys_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/pdp11.c (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol_type.
* bfd/plugin.c (bfd_plugin_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/rs6000-core.c (CoreHdr, VmInfo): Rename union member new to
new_dump.
(read_hdr, rs6000coff_core_p)
(rs6000coff_core_file_matches_executable_p)
(rs6000coff_core_file_failing_command)
(rs6000coff_core_file_failing_signal): Updated function to use new
union member name.
* bfd/som.c (som_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/syms.c (_bfd_generic_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/tekhex.c (first_phase, tekhex_make_empty_symbol): Rename
variable new to new_symbol.
* binutils/nlmconv.c (main): Rename variable new to new_name.
* gas/config/tc-arm.c (insert_reg_alias): Rename variable new to
new_reg.
* gas/config/tc-dlx.c (parse_operand): Rename variable new to
new_pos.
* gas/config/tc-ia64.c (ia64_gen_real_reloc_type): Rename variable
new to newr.
* gas/config/tc-mcore.c (parse_exp, parse_imm): Rename variable
new to new_pointer.
* gas/config/tc-microblaze.c (parse_exp, parse_imm, check_got):
Change name from new to new_pointer.
* gas/config/tc-or32.c (parse_operand): Rename variable new to
new_pointer.
* gas/config/tc-pdp11.c (md_assemble): Rename variable new to
new_pointer.
* gas/config/tc-pj.c (alias): Change argument new to new_name.
* gas/config/tc-score.c (s3_build_score_ops_hsh): Rename variable
new to new_opcode. (s3_build_dependency_insn_hsh) Rename variable
new to new_i2n. (s3_convert): Rename variables old and new to
r_old and r_new.
* gas/config/tc-score7.c (s7_build_score_ops_hsh): Rename variable
new to new_opcode. (s7_build_dependency_insn_hsh): Rename variable
new to new_i2d. (s7_b32_relax_to_b16, s7_convert_frag): Rename
variables old and new to r_old and r_new.
* gas/config/tc-sh.c (parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-sh64.c (shmedia_parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-tic4x.c (tic4x_operand_parse): Rename variable new
to new_pointer.
* gas/config/tc-z8k.c (parse_exp): Rename variable new to
new_pointer.
* gas/listing.c (listing_newline): Rename variable new to new_i.
* ld/ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop)
(exp_trinop, exp_unop, exp_nameop, exp_assop): Rename variable new
to new_e.
* ld/ldfile.c (ldfile_add_library_path): Rename variable new to
new_dirs. (ldfile_add_arch): Rename variable new to new_arch.
* ld/ldlang.c (new_statement, lang_final, lang_add_wild)
(lang_target, lang_add_fill, lang_add_data, lang_add_assignment)
(lang_add_insert): Rename variable new to new_stmt. (new_afile):
Added missing cast. (lang_memory_region_lookup): Rename variable
new to new_region. (init_os): Rename variable new to
new_userdata. (lang_add_section): Rename variable new to
new_section. (ldlang_add_undef): Rename variable new to
new_undef. (realsymbol): Rename variable new to new_name.
* opcodes/z8kgen.c (internal, gas): Rename variable new to new_op.
Updated sources to avoid using the identifier name "template",
which is a keyword in c++.
* bfd/elf32-arm.c (struct stub_def): Rename member template to
template_sequence. (arm_build_one_stub,
find_stub_size_and_template, arm_size_one_stub, arm_map_one_stub):
Rename variable template to template_sequence.
* bfd/elfxx-ia64.c (elfNN_ia64_relax_br, elfNN_ia64_relax_brl):
Rename variable template to template_val.
* gas/config/tc-arm.c (struct asm_cond, struct asm_psr, struct
asm_barrier_opt): Change member template to
template_name. (md_begin): Update code to reflect new member
names.
* gas/config/tc-i386.c (struct templates, struct _i386_insn)
(match_template, cpu_flags_match, match_reg_size, match_mem_size)
(operand_size_match, md_begin, i386_print_statistics, pi)
(build_vex_prefix, md_assemble, parse_insn, optimize_imm)
(optimize_disp): Updated code to use new names. (parse_insn):
Added casts.
* gas/config/tc-ia64.c (dot_template, emit_one_bundle): Updated
code to use new names.
* gas/config/tc-score.c (struct s3_asm_opcode): Renamed member
template to template_name. (s3_parse_16_32_inst, s3_parse_48_inst,
s3_do_macro_ldst_label, s3_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-score7.c (struct s7_asm_opcode): Renamed member
template to template_name. (s7_parse_16_32_inst,
s7_do_macro_ldst_label, s7_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-tic30.c (md_begin, struct tic30_insn)
(md_assemble): Update code to use new names.
* gas/config/tc-tic54x.c (struct _tic54x_insn, md_begin)
(optimize_insn, tic54x_parse_insn, next_line_shows_parallel):
Update code to use new names.
* include/opcode/tic30.h (template): Rename type template to
insn_template. Updated code to use new name.
* include/opcode/tic54x.h (template): Rename type template to
insn_template.
* opcodes/cris-dis.c (bytes_to_skip): Update code to use new name.
* opcodes/i386-dis.c (putop): Update code to use new name.
* opcodes/i386-gen.c (process_i386_opcodes): Update code to use
new name.
* opcodes/i386-opc.h (struct template): Rename struct template to
insn_template. Update code accordingly.
* opcodes/i386-tbl.h (i386_optab): Update type to use new name.
* opcodes/ia64-dis.c (print_insn_ia64): Rename variable template
to template_val.
* opcodes/tic30-dis.c (struct instruction, get_tic30_instruction):
Update code to use new name.
* opcodes/tic54x-dis.c (has_lkaddr, get_insn_size)
(print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
Update code to use new name.
* opcodes/tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
Update type to new name.
* coffgen.c (make_a_section_from_file): Set the backend long
section names enable if long section names found on input.
* coffcode.h: Extend long section names documentation to match.
binutils/ChangeLog
* objcopy.c (enum long_section_name_handling): New enum type.
(enum command_line_switch): Add OPTION_LONG_SECTION_NAMES.
(copy_options[]): Add entry for --long-section-names option.
(copy_usage): Document it.
(set_long_section_mode): New subroutine.
(copy_file): Call it.
(copy_main): Accept OPTION_LONG_SECTION_NAMES and parse arg.
* doc/binutils.texi: Update objcopy documentation with details
of new option.
* internal.h (C_AIX_WEAKEXT): New macro.
(C_WEAKEXT): Use the GNU definition in the generic part of the file,
and conditionally reset it to C_AIX_WEAKEXT in the XCOFF part of
the file.
(CSECT_SYM_P): New macro.
* xcoff.h (L_WEAK): Define.
(EXTERN_SYM_P): New macro.
bfd/
* coffcode.h (coff_pointerize_aux_hook): Update CSECT_SYM_P to
check whether a symbol has csect information.
(coff_print_aux): Likewise.
* coff-rs6000.c (_bfd_xcoff_swap_aux_in): Handle auxillary csect
information for C_AIX_WEAKEXT too.
(_bfd_xcoff_swap_aux_out): Likewise.
(xcoff_reloc_type_br): Handle defweak symbols too.
* coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Handle auxillary csect
information for C_AIX_WEAKEXT too.
(_bfd_xcoff64_swap_aux_out): Likewise.
(xcoff64_reloc_type_br): Handle defweak symbols too.
* coffgen.c (coff_print_symbol): Handle auxillary function
information for C_AIX_WEAKEXT too.
* xcofflink.c (_bfd_xcoff_canonicalize_dynamic_symtab): Set BSF_WEAK
instead of BSF_GLOBAL if the L_WEAK flag is set.
(xcoff_dynamic_definition_p): New function.
(xcoff_link_add_dynamic_symbols): Use it to decide whether ldsym
defines h. Don't change h if ldsym isn't the definition. Otherwise,
always take the symbol class from the ldsym. Use weak bfd symbol
types for weak ldsyms.
(xcoff_link_add_symbols): Use CSECT_SYM_P and EXTERN_SYM_P.
Fix the check for whether a definition is from a shared object.
Allow redefinitions of weak symbols.
(xcoff_link_check_ar_symbols): Use EXTERN_SYM_P.
(xcoff_keep_symbol_p): Likewise.
(bfd_xcoff_size_dynamic_sections): Use CSECT_SYM_P.
(xcoff_link_input_bfd): Use CSECT_SYM_P and EXTERN_SYM_P.
Add .loader entries for C_AIX_WEAKEXT as well as C_EXT symbols,
but mark them as L_WEAK.
(xcoff_write_global_symbol): Treat weak symbols as C_AIX_WEAKEXT
instead of C_EXT if C_AIX_WEAKEXT == C_WEAKEXT.
gas/
* config/tc-ppc.c (ppc_frob_symbol): Add csect information for
C_AIX_WEAKEXT too.
ld/testsuite/
* ld-powerpc/aix-glink-2a.s, ld-powerpc/aix-glink-2a.ex,
ld-powerpc/aix-glink-2b.s, ld-powerpc/aix-glink-2c.s,
ld-powerpc/aix-glink-2c.ex, ld-powerpc/aix-glink-2d.s,
ld-powerpc/aix-glink-2-32.dd, ld-powerpc/aix-glink-2-64.dd,
ld-powerpc/aix-weak-1a.s, ld-powerpc/aix-weak-1b.s,
ld-powerpc/aix-weak-1-rel.hd, ld-powerpc/aix-weak-1-rel.nd,
ld-powerpc/aix-weak-1-dso.hd, ld-powerpc/aix-weak-1-dso.nd,
ld-powerpc/aix-weak-1-dso.dnd, ld-powerpc/aix-weak-1.ex,
ld-powerpc/aix-weak-2a.s, ld-powerpc/aix-weak-2a.ex,
ld-powerpc/aix-weak-2a.nd, ld-powerpc/aix-weak-2b.s,
ld-powerpc/aix-weak-2b.nd, ld-powerpc/aix-weak-2c.s,
ld-powerpc/aix-weak-2c.ex, ld-powerpc/aix-weak-2c.nd,
ld-powerpc/aix-weak-2c.od, ld-powerpc/aix-weak-3a.s,
ld-powerpc/aix-weak-3a.ex, ld-powerpc/aix-weak-3b.s,
ld-powerpc/aix-weak-3b.ex, ld-powerpc/aix-weak-3-32.d,
ld-powerpc/aix-weak-3-32.dd, ld-powerpc/aix-weak-3-64.d,
ld-powerpc/aix-weak-3-64.dd: New tests.
* ld-powerpc/aix52.exp: Run them. Replace tmp/aix-* with
tmp/aix64-* in 64-bit ld options.