Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
Convert hardware watchpoints to use breakpoint_ops.
gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this. Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint. Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this. Accept pointer to struct bp_location
instead of pointer to struct breakpoint. Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.
gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
Looks like we've long been using "AO" instead of "A0" in the enum for the
A0.W. But no one noticed since we aren't using it directly (we assume the
position in the reverse). I've committed this simple fix.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
for i18n.
* tui/tui-layout.c (tui_set_layout_for_display_command):
Split line so that operator goes to beginning of line.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Move
assignment out of if statement.
This signal does not indicate an error condition, so the default
behavior when receiving this signal should be to resume execution
silently.
gdb/ChangeLog:
Do not stop on SIGPRIO signals by default
* infrun.c (_initialize_infrun): Unset signal_stop and
signal_print for TARGET_SIGNAL_PRIO.
* frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
this_pc_in_block, morestack_msym and morestack_name. Check for
"__morestack" minimal symbol there.
gdb/testsuite/
* gdb.base/morestack.exp: New file.
* gdb.base/morestack.c: New file.
This makes sure that the `load' command does not repeat when the user
presses Return again, as documented in the GDB User's Manual.
gdb/ChangeLog:
* symfile.c (find_sym_fns): Add call to dont_repeat.
gdb/ChangeLog:
* top.c (print_gdb_version): Update copyright year in version output.
gdb/gdbserverChangeLog:
* server.c (gdbserver_version): Update copyright year in version
output.
* gdbreplay.c (gdbreplay_version): Ditto.
gdb/ChangeLog:
* ChangeLog-2010: Renames ChangeLog.
* ChangeLog: New file.
* config/djgpp/fnchange.lst: Add exception for gdb/ChangeLog-2010.
Also fix a typo in the exception for gdb/ChangeLog-2009.
Initial support for Blackfin processors. This supports the standard ABI.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Trying to print a variable defined as an access to an unconstrained
array:
type String_Access is access String;
S1 : String_Access;
If that variable is null, then GDB prints its value in an odd way:
(gdb) print S1
$1 = (string_bug.string_access) (null)
^^^^^^
This patch changes the debugger behavior to print the pointer using
the same output we'd use for any null pointer:
(gdb) print S1
$1 = (string_bug.string_access) 0x0
It also adds an assert, helping us verify an assumption.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Print null array pointers as
`0x0' rather than `(null)'. Add assertion.
gdb/testsuite/ChangeLog:
* gdb.ada/arrayptr/foo.adb: Add new local variable Null_String.
* gdb.ada/arrayptr.exp: Add test printing that new variable.
This patch enhances the debugger to distinguish between fat pointers
that represent either: array types, or array access types. In the latter
case, the object/type is encoded as a typedef type pointing to the fat
pointer.
The first part of the change is to adjust ada_check_typedef to avoid
stripping the typedef layer when it points to a fat pointer. The rest
of the patch is adjustments required in various places to deal with
the fact that the type is uses might now be a typedef.
gdb/ChangeLog:
* ada-lang.h (ada_coerce_to_simple_array): Add declaration.
* ada-lang.c (ada_typedef_target_type): New function.
(desc_base_type): Add handling of fat pointer typedefs.
(ada_coerce_to_simple_array): Make non-static.
(decode_packed_array_bitsize): Add handling of fat pointer typedefs.
Add assertion.
(ada_template_to_fixed_record_type_1, ada_to_fixed_type)
(ada_check_typedef): Add handling of fat pointer typedefs.
(ada_evaluate_subexp) [OP_FUNCALL]: Likewise.
* ada-typeprint.c (ada_print_type): Add handling of fat pointer
typedefs.
* ada-valprint.c (ada_val_print_1): Convert fat pointers that are not
array accesses to simple arrays rather than simple array pointers.
(ada_value_print): In the case of array descriptors, do not print
the value type description unless it is an array access.
gdb/testsuite/ChangeLog:
* gdb.ada/lang_switch.exp: Correct expected parameter value.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Glitches): Remove paragraph describing the
occasional case where the debugger prints an array address
instead of the array itself.