https://sourceware.org/ml/gdb-patches/2013-12/msg00144.html
The vector of unavailable parts of a value is currently byte based. Given
that we can model a value down to the bit level, we can potentially loose
information with the current implementation. After this patch we model the
unavailable information in bits.
gdb/ChangeLog
* dwarf2loc.c (read_pieced_value): Mark bits, not bytes
unavailable, use correct bit length.
* value.c (struct value): Extend comment on unavailable to
indicate that it is bit based.
(value_bits_available): New function.
(value_bytes_available): Call value_bits_available.
(value_entirely_available): Check against the bit length, not byte
length.
(mark_value_bits_unavailable): New function.
(mark_value_bytes_unavailable): Move contents to
mark_value_bits_unavailable, call to same.
(memcmp_with_bit_offsets): New function.
(value_available_contents_bits_eq): New function, takes the
functionality from value_available_contents_eq but uses
memcmp_with_bit_offsets now, and is bit not byte based.
(value_available_contents_eq): Move implementation into
value_available_contents_bits_eq, call to same.
(value_contents_copy_raw): Work on bits, not bytes.
(unpack_value_bits_as_long_1): Check availability in bits, not
bytes.
* value.h (value_bits_available): Declare new function.
(mark_value_bits_unavailable): Declare new function.
gdb/testsuite/ChangeLog
* gdb.trace/unavailable-dwarf-piece.c: New file.
* gdb.trace/unavailable-dwarf-piece.exp: New file.
In order to catch <optimized out> errors like we catch <unavailable>
errors, this adds a new OPTIMIZED_OUT_ERROR error code, and throws it
in various places.
gdb/ChangeLog
2013-12-06 Andrew Burgess <aburgess@broadcom.com>
Pedro Alves <palves@redhat.com>
* exceptions.h (errors): Add OPTIMIZED_OUT_ERROR.
* dwarf2loc.c (write_pieced_value): Throw OPTIMIZED_OUT_ERROR.
* frame.c (frame_unwind_register): Throw OPTIMIZED_OUT_ERROR.
* spu-tdep.c (spu_software_single_step): Throw
OPTIMIZED_OUT_ERROR.
* valops.c (value_assign): Throw OPTIMIZED_OUT_ERROR.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This is to help make it slightly clearer how this method is expected
to extract data from the given register.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs)
<read_addr_from_reg>: Renames "read_reg".
* dwarf2-frame.c (read_addr_from_reg): Renames "read_reg".
Adjust comment.
(dwarf2_frame_ctx_funcs, execute_stack_op, dwarf2_frame_cache):
Use read_addr_from_reg in place of read_reg.
* dwarf2expr.c (execute_stack_op): Use read_addr_from_reg
in place of read_reg.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Renames
dwarf_expr_read_reg.
(dwarf_expr_ctx_funcs): Replace dwarf_expr_read_reg
with dwarf_expr_read_addr_from_reg.
(needs_frame_read_addr_from_reg): Renames needs_frame_read_reg.
(needs_frame_ctx_funcs): Replace needs_frame_read_reg with
needs_frame_read_addr_from_reg.
Similar to qsort(), the glibc version of memcpy() also declares its
arguments with __attribute__(__nonnull__(...)). If NULL is passed
anyway, upstream GCC's new pass '-fisolate-erroneous-paths' typically
causes a trap in such cases. I've encountered this with GDB in
chain_candidate() when trying to execute the break.exp test case.
gdb/
2013-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2loc.c (chain_candidate): Prevent invoking memcpy with
NULL.
Consider the following code, compiled at -O2 on ppc-linux:
procedure Increment (Val : in out Float; Msg : String);
The implementation does not really matter in this case). In our example,
this function is being called from a function with Param_1 set to 99.0.
Trying to break inside that function, and running until reaching that
breakpoint yields:
(gdb) b increment
Breakpoint 1 at 0x100014b4: file callee.adb, line 6.
(gdb) run
Starting program: /[...]/foo
Breakpoint 1, callee.increment (val=99.0, val@entry=0.0, msg=...)
at callee.adb:6
6 if Val > 200.0 then
The @entry value for parameter "val" is incorrect, it should be 99.0.
The associated call-site parameter DIE looks like this:
.uleb128 0xc # (DIE (0x115) DW_TAG_GNU_call_site_parameter)
.byte 0x2 # DW_AT_location
.byte 0x90 # DW_OP_regx
.uleb128 0x21
.byte 0x3 # DW_AT_GNU_call_site_value
.byte 0xf5 # DW_OP_GNU_regval_type
.uleb128 0x3f
.uleb128 0x25
The DW_AT_GNU_call_site_value uses a DW_OP_GNU_regval_type
operation, referencing register 0x3f=63, which is $f31,
an 8-byte floating register. In that register, the value is
stored using the usual 8-byte float format:
(gdb) info float
f31 99.0 (raw 0x4058c00000000000)
The current code evaluating DW_OP_GNU_regval_type operations
currently is (dwarf2expr.c:execute_stack_op):
result = (ctx->funcs->read_reg) (ctx->baton, reg);
result_val = value_from_ulongest (address_type, result);
result_val = value_from_contents (type,
value_contents_all (result_val));
What the ctx->funcs->read_reg function does is read the contents
of the register as if it contained an address. The rest of the code
continues that assumption, thinking it's OK to then use that to
create an address/ulongest struct value, which we then re-type
to the type specified by DW_OP_GNU_regval_type.
We're getting 0.0 above because the read_reg implementations
end up treating the contents of the FP register as an integral,
reading only 4 out of the 8 bytes. Being a big-endian target,
we read the high-order ones, which gives us zero.
This patch fixes the problem by introducing a new callback to
read the contents of a register as a given type, and then adjust
the handling of DW_OP_GNU_regval_type to use that new callback.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
Extend the documentation a bit.
<get_reg_value>: New field.
* dwarf2loc.c (dwarf_expr_get_reg_value)
(needs_frame_get_reg_value): New functions.
(dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
callback.
* dwarf2-frame.c (get_reg_value): New function.
(dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
Use new callback to compute result_val.
gdb/testsuite/ChangeLog:
* gdb.ada/O2_float_param: New testcase.
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
A couple years ago, dwarf_expr_fetch used to return a CORE_ADDR. It
was made to return a ULONGEST since, and the 'dwarf_regnum' local
adjusted accordingly, but, we kept printing it with paddress.
gdbarch_dwarf2_reg_to_regnum takes the register number as 'int', so
there's really no point in using ULONGEST/pulongest either.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
local is now int instead of ULONGEST. Print it with %d
instead of paddress.
I came across a pattern used to construct a value in the following way:
struct value *val = allocate_value_lazy (type);
VALUE_LVAL (val) = lval_memory;
set_value_address (val, address);
Instead we fold the above call into:
value_at_lazy (type, addr);
2013-08-27 Sanimir Agovic <sanimir.agovic@intel.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
of assembling value via allocate_value_lazy and attribute setter.
* findvar.c (default_read_var_value): Use value_at_lazy instead of
assembling value via allocate_value_lazy and attribute setter.
* valops.c (do_search_struct_field): Use value_at_lazy instead of
assembling value via allocate_value_lazy and attribute setter.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_traceframe_info): Push trace state variables
present in the trace data into the traceframe info object.
* breakpoint.c (DEF_VEC_I): Remove.
* common/filestuff.c (DEF_VEC_I): Likewise.
* dwarf2loc.c (DEF_VEC_I): Likewise.
* mi/mi-main.c (DEF_VEC_I): Likewise.
* common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
* features/traceframe-info.dtd: Add tvar element and its
attributes.
* tracepoint.c (free_traceframe_info): Free vector 'tvars'.
(build_traceframe_info): Push trace state variables present in the
trace data into the traceframe info object.
(traceframe_info_start_tvar): New function.
(tvar_attributes): New.
(traceframe_info_children): Add "tvar" element.
* tracepoint.h (struct traceframe_info) <tvars>: New field.
* NEWS: Mention the change in GDB and GDBserver.
gdb/doc:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Traceframe Info Format): Document tvar element and
its attributes.
gdb/gdbserver:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* tracepoint.c (build_traceframe_info_xml): Output trace state
variables present in the trace buffer.
PR symtab/15391 is a failure with the DW_OP_GNU_implicit_pointer
feature.
I tracked it down to a logic error in read_pieced_value. The code
truncates this_size_bits according to the type size and offset too
early -- it should do it after taking bits_to_skip into account.
This patch fixes the bug.
While testing this, I also tripped across a latent bug because
indirect_pieced_value does not sign-extend where needed. This patch
fixes this bug as well.
Finally, Pedro pointed out that a previous version implemented sign
extension incorrectly. This version introduces a new gdb_sign_extend
function for this. A couple of notes on this function:
* It has the gdb_ prefix to avoid clashes with various libraries that
felt free to avoid proper namespacing. There is a "sign_extend"
function in a Tile GX header, in an SOM-related BFD header (and in
sh64-tdep.c and as a macro in arm-wince-tdep.c, but those are
ours...)
* I looked at all the sign extensions in gdb and didn't see ones that
I felt comfortable converting to use this function; in large part
because I don't have a good way to test the conversion.
Built and regtested on x86-64 Fedora 18. New test cases included;
this required a minor addition to the DWARF assembler. Note that the
DWARF CU made by implptrpiece.exp uses a funny pointer size in order
to show the sign-extension bug on all platforms.
* dwarf2loc.c (read_pieced_value): Truncate this_size_bits
after taking bits_to_skip into account. Sign extend byte_offset.
* utils.h (gdb_sign_extend): Declare.
* utils.c (gdb_sign_extend): New function.
* gdb.dwarf2/implptrpiece.exp: New file.
* gdb.dwarf2/implptrconst.exp (d): New variable.
Print d.
* lib/dwarf2.exp (Dwarf::_location): Handle DW_OP_piece.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
Hui Zhu <hui@codesourcery.com>
* dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
(dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
DW_OP_deref_size.
Fix entry-values in C++ across CUs.
* dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
lookup_minimal_symbol. Add a comment.
* dwarf2read.c
(read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
DW_AT_linkage_name.
gdb/testsuite/
Fix entry-values in C++ across CUs.
* gdb.arch/amd64-tailcall-cxx.exp: New file.
* gdb.arch/amd64-tailcall-cxx1.S: New file.
* gdb.arch/amd64-tailcall-cxx1.cc: New file.
* gdb.arch/amd64-tailcall-cxx2.S: New file.
* gdb.arch/amd64-tailcall-cxx2.cc: New file.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
SIZE to size_t.
(dwarf2_evaluate_loc_desc): Likewise.
(dwarf2_loc_desc_needs_frame): Likewise.
(locexpr_describe_location_1): Likewise.
* dwarf2loc.h (struct dwarf2_locexpr_baton): Make SIZE as
size_t.
(struct dwarf2_loclist_baton): Likewise.
* dwarf2read.c (struct dwarf_block): Likewise.
(dump_die_shallow): Use pulongest to print dwarf_block.size.
(decode_locdesc): Expand SIZE and I to size_t.
Adjust address for DW_OP_GNU_addr_index.
* dwarf2expr.h (dwarf_expr_context): Update comment.
* dwarf2loc.c (locexpr_describe_location_piece): New arg per_cu,
all callers updated. Handle TLS vars described with
DW_OP_GNU_const_index.
(disassemble_dwarf_expression): Handle DW_OP_GNU_addr_index
and DW_OP_GNU_const_index.
* dwarf2read.c (decode_locdesc): Handle DW_OP_GNU_addr_index.
* dwarf2expr.c (execute_stack_op): Support DW_OP_GNU_parameter_ref.
* dwarf2loc.c (call_site_parameter_matches): Support
CALL_SITE_PARAMETER_PARAM_OFFSET.
(needs_dwarf_reg_entry_value): Push stub value.
* dwarf2read.c (read_call_site_scope): New variable origin. Support
CALL_SITE_PARAMETER_PARAM_OFFSET and its DW_AT_abstract_origin.
* gdbtypes.h (enum call_site_parameter_kind): New item
CALL_SITE_PARAMETER_PARAM_OFFSET.
(struct call_site.parameter.u): New field param_offset.
gdb/testsuite/
* gdb.arch/amd64-entry-value-param.S: New file.
* gdb.arch/amd64-entry-value-param.c: New file.
* gdb.arch/amd64-entry-value-param.exp: New file.
Code cleanup: Generalize call_site.parameter key.
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_entry_value>: Remove
variable dwarf_reg. New variable kind_u. Update parameters to
push_dwarf_reg_entry_value.
(ctx_no_push_dwarf_reg_entry_value): Update parameters.
* dwarf2expr.h (enum call_site_parameter_kind)
(union call_site_parameter_u): Forward declarations.
(struct dwarf_expr_context_funcs): Update parameters and their
description for push_dwarf_reg_entry_value.
(ctx_no_push_dwarf_reg_entry_value): Update parameters.
* dwarf2loc.c (call_site_parameter_matches): New function.
(dwarf_expr_reg_to_entry_parameter): Update parameters and their
description. Use call_site_parameter_matches.
(dwarf_expr_push_dwarf_reg_entry_value, value_of_dwarf_reg_entry):
Update parameters and their description.
(value_of_dwarf_block_entry): Remove variables dwarf_reg and fb_offset.
New variable kind_u. Adjust the caller for updated parameters.
(needs_dwarf_reg_entry_value): Update parameters.
* dwarf2read.c (read_call_site_scope): New variable loc. Use it
instead of attr. Update for the changed fields of struct
call_site_parameter.
* gdbtypes.h: Include dwarf2expr.h.
(enum call_site_parameter_kind): New.
(struct call_site.parameter): New field kind. Wrap dwarf_reg and
fb_offset into new union u.
"const gdb_byte *".
(struct dwarf2_fde): Make instructions, end "const gdb_byte *".
(execute_cfa_program): Update to match API of leb128 functions.
(read_1_byte, read_4_bytes, read_8_bytes): Make buf parameter
"const gdb_byte *".
(read_unsigned_leb128, read_signed_leb128): Delete.
(read_initial_length): Change type of buf argument to
"const gdb_byte *".
(read_encoded_value): Update to match API of leb128 functions.
(decode_frame_entry): Change result to "const gdb_byte *", and
similarly for "start" parameter.
(decode_frame_entry_1): Ditto. Use new leb128 reader functions.
(dwarf2_build_frame_info): Change local frame_ptr to
"const gdb_byte *".
* dwarf2expr.c (safe_read_uleb128, safe_read_sleb128): Replaces
read_uleb128, read_sleb128. All callers updated.
(safe_skip_leb128): New function.
(dwarf_block_to_dwarf_reg): Update to match API of leb128 functions.
Call gdb_read_uleb128, gdb_skip_leb128 instead of read_uleb128.
(dwarf_block_to_dwarf_reg_deref): Update to match API of leb128
functions. Call gdb_read_uleb128, gdb_read_sleb128 instead of
read_uleb128, read_sleb128.
(dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): Ditto.
(execute_stack_op): Update to match API of leb128 functions.
* dwarf2expr.h: #include "leb128.h".
(read_uleb128, read_sleb128): Delete.
(gdb_read_uleb128, gdb_read_sleb128, gdb_skip_leb128): New functions.
(safe_read_uleb128, safe_read_sleb128, safe_skip_leb128): Declare.
* dwarf2loc.c (debug_loc_kind): New enum.
(decode_debug_loc_addresses): New function.
(decode_debug_loc_dwo_addresses): New function.
(dwarf2_find_location_expression): Rewrite.
(dwarf2_compile_expr_to_ax): Update to match API of leb128 functions.
(locexpr_describe_location_piece): Ditto.
(disassemble_dwarf_expression): Ditto.
(locexpr_describe_location_1): Ditto.
(loclist_describe_location): Rewrite.
* dwarf2loc.h (dwarf2_loclist_baton): New member "from_dwo".
* dwarf2read.c (die_reader_specs): New member "buffer_end".
(dwarf2_section_buffer_overflow_complaint): Renamed from
dwarf2_macros_too_long_complaint. All callers updated.
(skip_leb128): Delete.
(init_cu_die_reader): Initialize reader->buffer_end.
(skip_one_die): Replace call to skip_leb128 with safe_skip_leb128.
(skip_form_bytes): New arg buffer_end. All callers updated.
Replace call to skip_leb128 with gdb_skip_leb128.
(skip_unknown_opcode): New arg mac_end. All callers updated.
(fill_in_loclist_baton): Initialize baton->from_dwo.
* symfile.c (default_symfile_relocate): Use sectp->owner instead of
objfile->obfd.
* symfile.h (dwarf2_debug_sections): New member addr.
* dwarf2expr.c (execute_stack_op): New case DW_OP_GNU_addr_index.
(ctx_no_get_addr_index): New function.
* dwarf2expr.h (dwarf_expr_context_funcs): New member get_addr_index.
(ctx_no_get_addr_index): Declare.
* dwarf2-frame.c (dwarf2_frame_ctx_funcs): Update.
* dwarf2loc.c (dwarf_expr_get_addr_index): New function.
(dwarf_expr_ctx_funcs): Update.
(needs_get_addr_index): New function.
(needs_frame_ctx_funcs): Update.
* dwarf2loc.h (dwarf2_read_addr_index): Declare.
* dwarf2read.c: #include "gdbcore.h".
(dwarf2_per_objfile): New members addr, dwo_files.
(dwarf2_elf_names): Add entry for addr.
(struct dwo_section_names): New type.
(dwo_section_names): New static global.
(dwarf2_cu): New members dwo_unit, addr_base, have_addr_base.
(dwarf2_per_cu_data): New member is_debug_types, all boolean uses of
old debug_types_section member updated to use this.
Rename member debug_types_section to info_or_types_section,
all uses updated.
(signatured_type): Rename member type_offset to type_offset_in_tu,
all uses updated. New member type_offset_in_section.
(struct dwo_sections): New type.
(struct dwo_unit): New type.
(struct dwo_file): New type.
(die_reader_specs): New member dwo_file.
(dwarf2_locate_sections): Watch for .debug_addr.
(zlib_decompress_section): Use sectp->owner instead of objfile->obfd.
(dwarf2_read_section): Get bfd of section from bfd's asection,
instead of objfile.
(create_cus_from_index): Initialize the_cu->info_or_types_section.
(create_signatured_type_table_from_index): Initialize
sig_type->info_or_types_section.
(dw2_get_file_names): Statement lists for type units with DWO files
live in the DWO file.
(create_debug_types_hash_table): New function.
(create_all_type_units): Rewrite.
(init_cu_die_reader): New arg dwo_file, all callers updated.
(init_and_read_dies_worker): Get section from
this_cu->info_or_types_section. Set sig_type->type_offset_in_section.
Watch for DW_AT_GNU_dwo_name and if present lookup the file and
continue reading the CU/TU from there.
(init_cutu_and_read_dies_no_follow): New arg dwo_file, all callers
updated. Get section from this_cu->info_or_types_section.
(create_all_comp_units): Initialize this_cu->info_or_types_section.
(skip_one_die): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(hash_dwo_file, eq_dwo_file): New functions.
(allocate_dwo_file_hash_table): New function.
(hash_dwo_unit, eq_dwo_unit): New functions.
(allocate_dwo_unit_table): New function.
(dwarf2_locate_dwo_sections): New function.
(struct create_dwo_info_table_data): New type.
(create_debug_info_hash_table_reader): New function.
(create_debug_info_hash_table): New function.
(try_open_dwo_file, open_dwo_file, init_dwo_file): New function.
(lookup_dwo_file): New function.
(lookup_dwo_comp_unit, lookup_dwo_type_unit): New functions.
(free_dwo_file, free_dwo_file_cleanup): New functions.
(free_dwo_file_from_slot, free_dwo_files): New functions.
(dwarf2_get_pc_bounds): Handle DW_FORM_GNU_addr_index.
(dwarf2_record_block_ranges): Ditto.
(read_partial_die): Ditto.
(process_enumeration_scope): Update to use type_offset_in_section.
(read_full_die_1): New function.
(read_full_die): Rewrite.
(read_attribute_value): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(read_addr_index_1, read_addr_index): New functions.
(read_addr_index_from_leb128): New function.
(struct dwarf2_read_addr_index_data): New type.
(dwarf2_read_addr_index_reader): New function.
(dwarf2_read_addr_index): New function.
(read_str_index): New function.
(leb128_size): New function.
(dwarf_decode_line_header): Delete arg abfd, all callers updated.
If processing a type unit from a DWO file, get the line section
from the DWO file.
(var_decode_location): Watch for DW_OP_GNU_addr_index.
(dwarf2_const_value_attr): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(lookup_die_type): Check whether section offset of type's die is
known before looking it up. Remove assert. Condition can
legimately happen for inter-cu type references.
(dwarf_attr_name): Handle Fission attributes.
(dwarf_form_name): Handle Fission forms.
(dump_die_shallow): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(follow_die_sig): Update to use type_offset_in_section.
(decode_locdesc): New case DW_OP_GNU_addr_index.
(skip_form_bytes): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(cu_debug_loc_section): New function.
(fill_in_loclist_baton, dwarf2_symbol_mark_computed): Call it.
(dwarf2_per_objfile_free): Unmap .debug_addr section.
Free DWO files if present.
* xcoffread.c (dwarf2_xcoff_names): Add .debug_addr.
testsuite/
* gdb.dwarf2/dw2-intercu.S (.Ltype_int2_in_cu2): Renamed from
.Ltype_int_in_cu2. Use name "int2" instead of "int".
All uses updated.
* gdb.dwarf2/dw2-intercu.exp: Add "ptype int2" ahead of
"ptype func_cu1" to expand cu2 before cu1.
Fix empty DWARF expressions DATA vs. SIZE conditionals.
* dwarf2loc.c (dwarf2_find_location_expression): Clear *LOCEXPR_LENGTH.
(dwarf_expr_frame_base_1): Indicate unavailability via zero *LENGTH.
(locexpr_tracepoint_var_ref): Check only zero SIZE, not zero DATA.
(loclist_read_variable, loclist_tracepoint_var_ref): Do not check for
zero DATA.
* dwarf2loc.h (struct dwarf2_locexpr_baton): Comment DATA vs. SIZE
validity.
* dwarf2read.c (struct dwarf_block): Comment DATA validity.
(dwarf2_fetch_die_location_block, dwarf2_symbol_mark_computed): Do not
clear DATA on zero SIZE.
gdb/testsuite/
Fix empty DWARF expressions DATA vs. SIZE conditionals.
* gdb.dwarf2/dw2-op-call.S (arraycallnoloc, arraynoloc): New DIEs.
(loclist): New.
(4): New abbrev.
* gdb.dwarf2/dw2-op-call.exp: Remove variable srcfile and executable.
Use prepare_for_testing, remove clean_restart.
(p arraynoloc, p arraycallnoloc): New tests.
Display @entry parameter values even for references.
* ada-valprint.c (ada_val_print_1) <TYPE_CODE_REF>: Try also
coerce_ref_if_computed.
* c-valprint.c (c_val_print) <TYPE_CODE_REF>: Likewise.
* dwarf2expr.c (dwarf_block_to_dwarf_reg_deref): New function.
(execute_stack_op) <DW_OP_GNU_entry_value>: Add -1 deref_size to the
existing push_dwarf_reg_entry_value call. Add new detection calling
dwarf_block_to_dwarf_reg_deref. Update the error message.
(ctx_no_push_dwarf_reg_entry_value): New parameter deref_size.
* dwarf2expr.h
(struct dwarf_expr_context_funcs) <push_dwarf_reg_entry_value>: Add new
parameter deref_size, describe it in the comment.
(ctx_no_push_dwarf_reg_entry_value): Add new parameter deref_size.
(dwarf_block_to_dwarf_reg_deref): New declaration.
* dwarf2loc.c (dwarf_entry_parameter_to_value): Add new parameter
deref_size, describe it in the function comment. New variables
data_src and size, fetch the alternative block accoring to DEREF_SIZE.
(dwarf_expr_push_dwarf_reg_entry_value): Add new parameter deref_size,
describe it in the function comment. Fetch the alternative block
accoring to DEREF_SIZE.
(entry_data_value_coerce_ref, entry_data_value_copy_closure)
(entry_data_value_free_closure, entry_data_value_funcs): New.
(value_of_dwarf_reg_entry): New variables checked_type, target_type,
outer_val, target_val, val and addr. Try to fetch and create also
referenced value content.
(pieced_value_funcs): NULL value for coerce_ref.
(needs_dwarf_reg_entry_value): Add new parameter deref_size.
* f-valprint.c (f_val_print) <TYPE_CODE_REF>: Try also
coerce_ref_if_computed.
* opencl-lang.c (opencl_value_funcs): NULL value for coerce_ref.
* p-valprint.c (pascal_val_print) <TYPE_CODE_REF>: Likewise.
* stack.c (read_frame_arg): Compare also dereferenced values.
* value.c (value_computed_funcs): Make the parameter v const, use
value_lval_const for it.
(value_lval_const, coerce_ref_if_computed): New function.
(coerce_ref): New variable retval. Call also coerce_ref_if_computed.
* value.h (struct lval_funcs): New field coerce_ref.
(value_computed_funcs): Make the parameter v const.
(value_lval_const, coerce_ref_if_computed): New declarations.
gdb/testsuite/
Display @entry parameter values even for references.
* gdb.arch/amd64-entry-value.cc (reference, datap, datap_input): New
functions.
(main): New variables regvar, nodatavarp, stackvar1, stackvar2. Call
reference and datap_input.
* gdb.arch/amd64-entry-value.exp (reference, breakhere_reference): New
breakpoints.
(continue to breakpoint: entry_reference: reference)
(entry_reference: bt at entry)
(continue to breakpoint: entry_reference: breakhere_reference)
(entry_reference: bt, entry_reference: ptype regparam)
(entry_reference: p regparam, entry_reference: ptype regparam@entry)
(entry_reference: p regparam@entry, entry_reference: p ®param@entry)
(entry_reference: p regcopy, entry_reference: p nodataparam)
(entry_reference: p nodataparam@entry): New tests.
Display @entry parameter values (without references).
* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New functions.
* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New declarations.
* dwarf2loc.c (dwarf2_find_location_expression): Support location list
entry record.
(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
functions.
(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
(loclist_read_variable_at_entry): New function.
(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
DW_AT_location, call dwarf_block_to_sp_offset for it.
* frame.h (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values): New declarations.
(struct frame_arg): New field entry_kind.
(read_frame_arg): New parameter entryargp.
* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
arg->entry_kind. Optionally print the `@entry' suffix.
(list_args_or_locals): New variable entryarg, initialize it.
Initialize also entry_kind of arg and entryarg. Conditionalize
list_arg_or_local for arg, add list_arg_or_local for entryarg. Call
xfree for entryarg.error.
* stack.c (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values_choices)
(print_entry_values): New variables.
(print_frame_arg): New gdb_assert for arg->entry_kind. Optionally
print the `@entry' suffix, possibly in combination for
print_entry_values_compact.
(read_frame_arg): New parameter entryargp, new variables entryval,
entryval_error and val_equal. Read in also entryargp, respect
print_entry_values, compare the values using val_equal, fill in also
argp->entry_kind (together with entryargp->entry_kind).
(print_frame_args): New variable entryarg, initialize it.
Conditionalize print_frame_arg for arg, add print_frame_arg for
entryarg. Call xfree for entryarg.error.
(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
* symtab.h (struct symbol_computed_ops): New field
read_variable_at_entry.
gdb/doc/
Display @entry parameter values (without references).
* gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call
example.
(Print Settings): New description of set print entry-values and show
print entry-values.
gdb/testsuite/
Display @entry parameter values (without references).
* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
(different, validity, invalid): New functions.
(main): Call them.
* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
stacktest, breakhere_stacktest, different, breakhere_different,
breakhere_validity and breakhere_invalid.
(entry: bt): Update for @entry.
(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
(entry_validity: *, entry_invalid: *): Many new tests.
* gdb.base/break.exp
(run until breakpoint set at small function, optimized file): Accept
also the @entry suffix.
* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
* gdb.mi/mi2-amd64-entry-value.c: New files.
* gdb.mi/mi2-amd64-entry-value.exp: New files.
Implement basic support for DW_TAG_GNU_call_site.
* block.c: Include gdbtypes.h and exceptions.h.
(call_site_for_pc): New function.
* block.h (call_site_for_pc): New declaration.
* defs.h: Include hashtab.h.
(make_cleanup_htab_delete, core_addr_hash, core_addr_eq): New
declarations.
* dwarf2-frame.c (dwarf2_frame_ctx_funcs): Install
ctx_no_push_dwarf_reg_entry_value.
* dwarf2expr.c (read_uleb128, read_sleb128): Support R as NULL.
(dwarf_block_to_dwarf_reg): New function.
(execute_stack_op) <DW_OP_GNU_entry_value>: Implement it.
(ctx_no_push_dwarf_reg_entry_value): New function.
* dwarf2expr.h (struct dwarf_expr_context_funcs): New field
push_dwarf_reg_entry_value.
(ctx_no_push_dwarf_reg_entry_value, dwarf_block_to_dwarf_reg): New
declarations.
* dwarf2loc.c: Include gdbcmd.h.
(dwarf_expr_ctx_funcs): New forward declaration.
(entry_values_debug, show_entry_values_debug, call_site_to_target_addr)
(dwarf_expr_reg_to_entry_parameter)
(dwarf_expr_push_dwarf_reg_entry_value): New.
(dwarf_expr_ctx_funcs): Install dwarf_expr_push_dwarf_reg_entry_value.
(dwarf2_evaluate_loc_desc_full): Handle NO_ENTRY_VALUE_ERROR.
(needs_dwarf_reg_entry_value): New function.
(needs_frame_ctx_funcs): Install it.
(_initialize_dwarf2loc): New function.
* dwarf2loc.h (entry_values_debug): New declaration.
* dwarf2read.c (struct dwarf2_cu): New field call_site_htab.
(read_call_site_scope): New forward declaration.
(process_full_comp_unit): Copy call_site_htab.
(process_die): Support DW_TAG_GNU_call_site.
(read_call_site_scope): New function.
(dwarf2_get_pc_bounds): Support NULL HIGHPC.
(dwarf_tag_name): Support DW_TAG_GNU_call_site.
(cleanup_htab): Delete.
(write_psymtabs_to_index): Use make_cleanup_htab_delete instead of it.
* exceptions.h (enum errors): New NO_ENTRY_VALUE_ERROR.
* gdb-gdb.py (StructMainTypePrettyPrinter): Support
FIELD_LOC_KIND_DWARF_BLOCK.
* gdbtypes.h (enum field_loc_kind): New entry
FIELD_LOC_KIND_DWARF_BLOCK.
(struct main_type): New loc entry dwarf_block.
(struct call_site, FIELD_DWARF_BLOCK, SET_FIELD_DWARF_BLOCK)
(TYPE_FIELD_DWARF_BLOCK): New.
* python/py-type.c: Include dwarf2loc.h.
(check_types_equal): Support FIELD_LOC_KIND_DWARF_BLOCK. New
internal_error call on unknown FIELD_LOC_KIND.
* symtab.h (struct symtab): New field call_site_htab.
* utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete)
(core_addr_hash, core_addr_eq): New functions.
gdb/testsuite/
Implement basic support for DW_TAG_GNU_call_site.
* gdb.arch/Makefile.in (EXECUTABLES): Add amd64-entry-value.
* gdb.arch/amd64-entry-value.cc: New file.
* gdb.arch/amd64-entry-value.exp: New file.
Remove excessive DWARF expressions memory duplication.
* dwarf2loc.c (per_cu_dwarf_call): Remove variable back_to and its use
for block.data.
(indirect_pieced_value): Remove variable result. Remove variable
back_to and its use for baton.data.
(dwarf2_compile_expr_to_ax): Remove variable back_to and its use for
block.data.
* dwarf2read.c (dwarf2_fetch_die_location_block): Remove xmemdup.
Update the function comment.
Fix implicit pointer offsets.
* dwarf2loc.c (indirect_pieced_value): Comment byte_offset. Use also
ptr.OFFSET.
gdb/testsuite/
Fix implicit pointer offsets.
* gdb.dwarf2/implptr.c (add): New marker baz breakpoint.
* gdb.dwarf2/implptr.exp (set baz breakpoint for implptr)
(continue to breakpoint: continue to baz breakpoint for implptr)
(sanity check element 0, sanity check element 1)
(enter the inlined function, check element 0 for the offset)
(check element 1 for the offset)
(continue to breakpoint: ignore the second baz breakpoint): New tests.
(set foo breakpoint for implptr): Update the breakpoint number.
Fix crash if referenced CU is aged out.
* dwarf2loc.c (per_cu_dwarf_call): New variable back_to, use to for
xfree of block.data.
(indirect_pieced_value): New variable back_to, use to for xfree of
baton.data.
(dwarf2_compile_expr_to_ax): New variable back_to, use to for xfree of
block.data.
* dwarf2read.c (dwarf2_find_base_address): New prototype.
(load_cu): New function from ...
(dw2_do_instantiate_symtab): ... the code here ...
(process_full_comp_unit): ... and here.
(dwarf2_fetch_die_location_block): Call load_cu first. Call xmemdup on
retval.data.
gdb/testsuite/
Fix crash if referenced CU is aged out.
* gdb.dwarf2/dw2-op-call.exp (maintenance set dwarf2 max-cache-age 0):
New.
* gdb.dwarf2/implptr.exp: Likewise.
* dwarf2loc.c (indirect_pieced_value): Use check_typedef for VALUE's
type.
gdb/testsuite/
* gdb.dwarf2/implptr.S: Rebuilt.
* gdb.dwarf2/implptr.c (intp, intpp, intppp): New typedefs.
(bar): Use them for j, k, l.
* gdb.dwarf2/implptr.exp: New variable opts. Support runtest parameter
COMPILE.
(print j in implptr:bar): Update for the intp typedef.
(print p[0].x in implptr:foo): Use more exact regex.
Code cleanup making also optimized out values lazy.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use
allocate_optimized_out_value. Twice.
(loclist_read_variable) Use allocate_optimized_out_value. Once.
* findvar.c (read_var_value): Likewise.
* value.c (allocate_optimized_out_value): New function.
* value.h (allocate_optimized_out_value): New declaration.
* dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
(write_pieced_value): Handle get_frame_register_bytes returning
that the register piece is unavailable/optimized out when doing a
read-modify write of a bitfield.
* findvar.c (value_from_register): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
* frame.c (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'. Throw error on bad debug info. Use
frame_register instead of frame_register_read, to fill in the new
arguments.
* frame.h (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'.
* valops.c: (value_assign): Adjust, and handle
get_frame_register_bytes failing.
* spu-tdep.c: Include exceptions.h.
(spu_software_single_step): Adjust, and handle
get_frame_register_bytes failing.
(spu_get_longjmp_target): Ditto.
* gdbarch.sh (register_to_value): Change to return int. New
parameters `optimizedp' and `unavailablep'.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.c (i386_register_to_value): Adjust to new
gdbarch_register_to_value interface.
* i387-tdep.c (i387_register_to_value): Ditto.
* i387-tdep.h (i387_register_to_value): Ditto.
* alpha-tdep.c (alpha_register_to_value): Ditto.
* ia64-tdep.c (ia64_register_to_value): Ditto.
* m68k-tdep.c (m68k_register_to_value): Ditto.
* mips-tdep.c (mips_register_to_value): Ditto.
* rs6000-tdep.c (rs6000_register_to_value): Ditto.
* dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
L and plongest.
(disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
use L and plongest.
(disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
Make value allocations more lazy.
* ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
instead of allocate_value and set_value_lazy when possible.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
instead of allocate_value and set_value_lazy.
* findvar.c (value_of_register_lazy): Likewise.
(read_var_value): Remove V preallocation, call just check_typedef in
advance. Move allocate_value to LOC_CONST, LOC_LABEL,
LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
the end, remove set_value_lazy there.
* valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
instead of allocate_value and set_value_lazy when possible.
* valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
* value.c (allocate_computed_value): Use allocate_value_lazy instead
of allocate_value and set_value_lazy.
(value_from_contents_and_address): Use allocate_value_lazy instead of
allocate_value and set_value_lazy when possible.
Pedro Alves <pedro@codesourcery.com>
* dwarf2read.c: Include "c-lang.h" and "valprint.h".
(struct dwarf2_per_objfile) <reading_partial_symbols>: New field.
(struct partial_die_info) <has_template_arguments>: New field.
<num_attrs>: Change type to unsigned char.
<building_fullname>: New field.
(dwarf2_build_psymtabs_hard): Set reading_partial_symbols. Only
allocate a CU if we don't have one already. Add a cleanup for the
CU.
(partial_die_full_name): Handle template arguments not in
DW_AT_name.
(dwarf2_psymtab_to_symtab): Clear reading_partial_symbols.
(load_full_comp_unit): Only allocate a CU if we don't have one
already.
(do_ui_file_peek_last): New.
(dwarf2_compute_name): Handle template parameters not in
DW_AT_name.
(read_comp_unit): Read and free abbrevs if not read yet.
(load_partial_dies): Handle template arguments not in DW_AT_name.
(find_partial_die): If we have a CU, but no a partial dies yet,
also read in the CU.
(dwarf2_const_value_attr): New, abstracted out from
dwarf2_const_value.
(dwarf2_const_value, dwarf2_const_value_data): Adjust to use
dwarf2_const_value_attr.
(determine_prefix): Detect and break loops created by RCVT's debug
info.
(maybe_queue_comp_unit): Bail out early if reading partial
symbols.
(follow_die_offset): Load full CU if we have no dies.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Make public.
* dwarf2loc.h (dwarf2_evaluate_loc_desc): Declare.
* dwarf2expr.h (struct dwarf_value_location): Use ULONGEST as type
of stack values.
(struct dwarf_expr_piece): Rename "expr" member to "mem". Add new
"value" member.
(dwarf_expr_push): Change input type to ULONGEST.
(dwarf_expr_fetch): Change return type to ULONGEST.
(dwarf_expr_fetch_address): Add prototype.
(dwarf2_read_address): Remove prototype.
* dwarf2expr.c (dwarf_expr_push): Use ULONGEST as type of stack values.
Truncate stack values to ctx->addr_size bytes.
(dwarf_expr_fetch): Change return value to ULONGEST.
(dwarf_expr_fetch_address): New function.
(add_piece): Use dwarf_expr_fetch_address instead of dwarf_expr_fetch
when appropriate. Update for struct dwarf_expr_piece changes.
(dwarf2_read_address): Remove.
(unsigned_address_type): Remove.
(signed_address_type): Remove.
(execute_stack_op): Use dwarf_expr_fetch_address instead of
dwarf_expr_fetch when appropriate. Use ULONGEST as type of stack
values. Perform operations on ULONGEST instead of on GDB values,
sign-extending from ctx->addr_size bytes as needed. Read DW_OP_addr
values and DW_OP_deref results as unsigned integers.
* dwarf2loc.c (read_pieced_value): Update for struct dwarf_expr_piece
changes.
(write_pieced_value): Likewise.
(dwarf2_evaluate_loc_desc): Use dwarf_expr_fetch_address instead of
dwarf_expr_fetch when appropriate.
(compile_dwarf_to_ax): Read DW_OP_addr values as unsigned integers.
* dwarf2-frame.c (execute_stack_op): Use dwarf_expr_fetch_address
instead of dwarf_expr_fetch when appropriate.
testsuite/ChangeLog:
* gdb.cell/dwarfaddr.exp: New file.
* gdb.cell/dwarfaddr.S: New file.
to base-address-selection entry base addresses. Read addresses
(and offsets) as signed/unsigned integers, depending on the
BFD's sign_extend_vma flag. Do not call dwarf2_read_address.
(loclist_describe_location): Likewise.
(disassemble_dwarf_expression): Read DW_OP_addr operand as
unsigned integer. Do not call dwarf2_read_address.
(locexpr_describe_location): Likewise for DW_OP_GNU_push_tls_address.
* dwarf2loc.c (struct dwarf_expr_baton) Replace objfile by per_cu.
(dwarf_expr_tls_address): Use per_cu instead of objfile.
(dwarf2_evaluate_loc_desc): Drop initialization of BATON.OBJFILE.
Initialize new BATON.PER_CU. Adjust CTX->GDBARCH initialization for
this change.
(struct needs_frame_baton): New field per_cu.
(dwarf2_loc_desc_needs_frame): Initialize new BATON.PER_CU.
* dwarf2read.c (struct dwarf2_per_cu_data) <cu>: Extend the comment.
Joel Brobecker