longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
definitions. Generate an error when both pure multi-arch and
"tm.h".
* gdbarch.h, gdbarch.c: Regenerate.
* defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
(EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* values.c (value_being_returned): Change the reference to
EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
* arch-utils.c (default_prepare_to_proceed)
(generic_prepare_to_proceed): Added new functions.
* arch-utils.h: New function declarations for
default_prepare_to_proceed() and generic_prepare_to_proceed().
* gdbarch.sh: Added PREPARE_TO_PROCEED.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* inferior.h: Added get_last_target_status() declaration.
* infrun.c (get_last_target_status): Added new function.
(handle_inferior_event): Saves last pid and waitstatus, which will
get returned by get_last_target_status().
* hppa-tdep.c (prepare_to_proceed): Added comment stating that
prepare_to_proceed() is potentially redundant since
default_prepare_to_proceed() has been added.
* linux-thread.c (prepare_to_proceed): Ditto.
* lin-lwp.c (prepare_to_proceed): Ditto.
* m3-nat.c (prepare_to_proceed): Ditto.
set_gdbarch_from_file): Fix spelling error.
* v850-tdep.c (v850_target_architecture_hook): Likewise.
* gdbarch.sh: Fix spelling errors in comment.
* gdbarch.c, gdbarch.h: Regenerate.
* ppcnbsd-nat.c (fetch_core_registers, fetch_inferior_registers,
store_inferior_registers): Support older NetBSD/powerpc systems
from before fp reg support was added. Adapt to register number
changes caused when powerpc target was multi-arched.
* symtab.c (search_symbols): Fix off by one error in index for
initializing variables ourtype, ourtype2, ourtype3, and ourtype4.
(symtab_symbol_info): fix similar off by one error.
Fri Aug 25 12:03:15 2000 David Taylor <taylor@texas.cygnus.com>
* gdbarch.sh (TARGET_ADDR_BIT): New macro for the number
of bits in gdb's representation of a target address.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbtypes.c (build_gdbtypes): Use TARGET_ADDR_BIT instead of
TARGET_PTR_BIT when initializing builtin_type_CORE_ADDR.
* printcmd.c (print_address_numeric): Use TARGET_ADDR_BIT instead
of TARGET_PTR_BIT, because we're printing an address, not a pointer.
arch-utils.{h,c}. The ``set architecutre'' and ``set endian''
commands (part of the move) were implemented to use add_set_enum_cmd()
so that ``set architecture <tab>'' works.
* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
* gdbarch.c, gdbarch.h: Regenerate.
* core-regset.c: Change FP0_REGNUM to a runtime test.
* procfs.c: Ditto.
* sun3-nat.c: Ditto.
* sparc-tdep.c: Ditto.
* i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
* ptx4-nat.c: Ditto.
* sol-thread.c (sol_thread_create_inferior): only add the thread
to the thread list if it is not already in there.
(prototypes for thread_db func ptrs): pretty up formatting.
run-time test for STACK_ALIGN_P.
* gdbarch.sh: Add support for function and variable predicates.
(STACK_ALIGN): Add. Implement with predicate - STACK_ALIGN_P.
* gdbarch.h, gdbarch.c: Re-generate.
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
functions which architectures can redefine, defaulting to
generic_pointer_to_address and generic_address_to_pointer.
* findvar.c (extract_typed_address, store_typed_address,
generic_pointer_to_address, generic_address_to_pointer): New
functions.
(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
definitions.
(extract_address, store_address): Doc fixes.
* values.c (value_as_pointer): Doc fix.
(value_from_pointer): New function.
* defs.h (extract_typed_address, store_typed_address): New
declarations.
* inferior.h (generic_address_to_pointer,
generic_pointer_to_address): New declarations.
* value.h (value_from_pointer): New declaration.
* ax-gdb.c (const_var_ref): Use value_from_pointer, not
value_from_longest.
* blockframe.c (generic_push_dummy_frame): Use read_pc and
read_sp, not read_register.
* c-valprint.c (c_val_print): Use extract_typed_address instead of
extract_address to extract vtable entries and references.
* cp-valprint.c (cp_print_value_fields): Use value_from_pointer
instead of value_from_longest to extract the vtable's address.
* eval.c (evaluate_subexp_standard): Use value_from_pointer
instead of value_from_longest to compute `this', and for doing
pointer-to-member dereferencing.
* findvar.c (read_register): Use extract_unsigned_integer, not
extract_address.
(read_var_value): Use store_typed_address instead of store_address
for building label values.
(locate_var_value): Use value_from_pointer instead of
value_from_longest.
* hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
instead of value_from_longest, to build arguments to __d_shl_get.
* printcmd.c (set_next_address): Use value_from_pointer, not
value_from_longest.
(x_command): Use value_from_pointer, not value_from_longest.
* tracepoint.c (set_traceframe_context): Use value_from_pointer,
not value_from_longest.
* valarith.c (value_add, value_sub): Use value_from_pointer, not
value_from_longest.
* valops.c (find_function_in_inferior, value_coerce_array,
value_coerce_function, value_addr, hand_function_call): Same.
* value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
* values.c (unpack_long): Use extract_typed_address to produce
addresses from pointers and references, not extract_address.
(value_from_longest): Use store_typed_address instead of
store_address to produce pointer and reference values.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
Jim Blandy
Andrew Cagney
Kevin Buettner
David Smith
John R. Moore
Nicholas Duffek
J.T. Conklin
Peter Schauer
David Anderson
David Taylor
Elena Zannoni
Michael Snyder
Jason Molenda
Stan Shebs