This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
2015-08-03 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.base/bp-permanent.exp: Report test as unsupported if
the target cannot stop at the permanent breakpoint.
Reinstate test message and replace hardcoded test command with a variable.
gdb/testsuite/ChangeLog:
2015-04-14 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/bp-permanent.exp (test): Reinstate correct test message.
This testcase does not work as expected in QEMU (aarch64 QEMU in my case). It
fails when trying to manually write the breakpoint instruction to a certain
PC address.
(gdb) p /x addr_bp[0] = buffer[0]^M
Cannot access memory at address 0x400834^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[0] = buffer[0]
p /x addr_bp[1] = buffer[1]^M
Cannot access memory at address 0x400835^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[1] = buffer[1]
p /x addr_bp[2] = buffer[2]^M
Cannot access memory at address 0x400836^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[2] = buffer[2]
p /x addr_bp[3] = buffer[3]^M
Cannot access memory at address 0x400837^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[3] = buffer[3]
The following patch prevents a number of failures by detecting this and bailing out in case the target has such a restriction. Writing to .text from within the program isn't any better. It just leads to a SIGSEGV.
Before the patch:
=== gdb Summary ===
After the patch:
=== gdb Summary ===
gdb/testsuite/ChangeLog:
2015-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/bp-permanent.exp (test): Handle the case of being unable
to write to the .text section.
Trying to fix a permanent breakpoints bug, I broke "next" over a
regular breakpoint. "next" would immediately hit the breakpoint the
program was already stopped at. But, the "next over setup" test
failed to notice this and still issued a pass. That's because the
regex matches "testsuite" in:
Breakpoint 2 at 0x400687: file src/gdb/testsuite/gdb.base/bp-permanent.c, line 46.
gdb/testsuite/ChangeLog:
2015-03-05 Pedro Alves <palves@redhat.com>
* gdb.base/bp-permanent.exp: Tighten "next over setup" regex.
The gdb.arch/i386-bp_permanent.exp test is currently failing an
assertion recently added:
(gdb) stepi
../../src/gdb/infrun.c:2237: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
FAIL: gdb.arch/i386-bp_permanent.exp: Single stepping past permanent breakpoint. (GDB internal error)
The assertion expects that the only reason we currently need to step a
breakpoint instruction is when we have a signal to deliver. But when
stepping a permanent breakpoint (with or without a signal) we also
reach this code.
The assertion is correct and the permanent breakpoints skipping code
is wrong.
Consider the case of the user doing "step/stepi" when stopped at a
permanent breakpoint. GDB's `resume' calls the
gdbarch_skip_permanent_breakpoint hook and then happily continues
stepping:
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (aspace, pc) == permanent_breakpoint_here)
{
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
}
But since gdbarch_skip_permanent_breakpoint already advanced the PC
manually, this ends up executing the instruction that is _after_ the
breakpoint instruction. The user-visible result is that a single-step
steps two instructions.
The gdb.arch/i386-bp_permanent.exp test is actually ensuring that
that's indeed how things work. It runs to an int3 instruction, does
"stepi", and checks that "leave" was executed with that "stepi". Like
this:
(gdb) b *0x0804848c
Breakpoint 2 at 0x804848c
(gdb) c
Continuing.
Breakpoint 2, 0x0804848c in standard ()
(gdb) disassemble
Dump of assembler code for function standard:
0x08048488 <+0>: push %ebp
0x08048489 <+1>: mov %esp,%ebp
0x0804848b <+3>: push %edi
=> 0x0804848c <+4>: int3
0x0804848d <+5>: leave
0x0804848e <+6>: ret
0x0804848f <+7>: nop
(gdb) si
0x0804848e in standard ()
(gdb) disassemble
Dump of assembler code for function standard:
0x08048488 <+0>: push %ebp
0x08048489 <+1>: mov %esp,%ebp
0x0804848b <+3>: push %edi
0x0804848c <+4>: int3
0x0804848d <+5>: leave
=> 0x0804848e <+6>: ret
0x0804848f <+7>: nop
End of assembler dump.
(gdb)
One would instead expect that a stepi at 0x0804848c stops at
0x0804848d, _before_ the "leave" is executed. This commit changes GDB
this way. Care is taken to make stepping into a signal handler when
the step starts at a permanent breakpoint instruction work correctly.
The patch adjusts gdb.arch/i386-bp_permanent.exp in this direction,
and also makes it work on x86_64 (currently it only works on i*86).
The patch also adds a new gdb.base/bp-permanent.exp test that
exercises many different code paths related to stepping permanent
breakpoints, including the stepping with signals cases. The test uses
"hack/trick" to make it work on all (or most) platforms -- it doesn't
really hard code a breakpoint instruction.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-11-12 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Clear the thread's 'stepped_breakpoint' flag.
Rewrite stepping over a permanent breakpoint.
(thread_still_needs_step_over, proceed): Don't set
stepping_over_breakpoint for permanent breakpoints.
(handle_signal_stop): Don't clear stepped_breakpoint. Also pull
single-step breakpoints out of the target on hardware step
targets.
(process_event_stop_test): If stepping a permanent breakpoint
doesn't hit the step-resume breakpoint, delete the step-resume
breakpoint.
(switch_back_to_stepped_thread): Also check if the stepped thread
has advanced already on hardware step targets.
(currently_stepping): Return true if the thread stepped a
breakpoint.
gdb/testsuite/
2014-11-12 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-bp_permanent.c: New file.
* gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
(srcfile): Set to i386-bp_permanent.c.
(top level): Adjust to work in both 32-bit and 64-bit modes. Test
that stepi does not execute the 'leave' instruction, instead of
testing it does execute.
* gdb.base/bp-permanent.c: New file.
* gdb.base/bp-permanent.exp: New file.
Joel Brobecker
Luis Machado
Sandra Loosemore
Pedro Alves