This removes code that was present from the very first git revisison
7b4ac7e1ed from 1988. It was in the
gdb/dbxread.c at the time (and makes more sense for dbx line info format
since line numbers are 16-bit entities in that debug format and debugging
files with more than 65535 lines would not work anyway) but moved from
there to gdb/buildsym.c which is used for dwarf line info as well, and
excluding an arbitrary line number does certainly not make sense nowadays.
Add a test case for line 65535
gdb:
2019-12-29 Bernd Edlinger <bernd.edlinger@hotmail.de>
* buildsym.c (buildsym_compunit::record_line): Do no longer ignore
line 65535.
gdb/testsuite:
2019-12-29 Bernd Edlinger <bernd.edlinger@hotmail.de>
* gdb.base/line65535.exp: New file.
* gdb.base/line65535.c: New file.
This test verifies that GDB correctly identifies the run-time type of
"s" as being the type "Circle". However, that can only be done
correctly if the GNAT runtime has been compiled and shipped with debug
information, so that GDB can poke in its internal data structures.
Currently the test fails when when running against a GNAT runtime
without debug info. This is the case, for example, on Arch Linux using
the distribution package.
This patch adds a helper in lib/ada.exp to check whether the GNAT
runtime has debug info or not. It then uses it in
gdb.ada/ptype_tagged_param.exp to expect a different result, depending
on whether we have debug info or not in the runtime.
At first, I made it so we would XFAIL the test, in the absence of debug
info, but then I thought that we might as well test for the output we
expect in the absence of debug info instead.
gdb/testsuite/ChangeLog:
* lib/ada.exp (gnat_runtime_has_debug_info): New proc.
* lib/gnat_debug_info_test.adb: New file.
* gdb.ada/ptype_tagged_param.exp: Use
gnat_runtime_has_debug_info, expect a different output if
runtime does not have debug info.
In my previous commit, I missed this other spot that is missing a
quote...
gdb/testsuite/ChangeLog:
* lib/sym-info-cmds.exp (GDBInfoSymbols::check_no_entry): Add
(another) quote in test name.
Extend testcases for GDB's infcall of call-by-value functions that
take aggregate values as parameters. In particular, existing test has
been substantially extended with class definitions whose definitions
of copy constructor, destructor, and move constructor functions are a
combination of
(1) explicitly defined by the user,
(2) defaulted inside the class declaration,
(3) defaulted outside the class declaration,
(4) deleted
(5) not defined in the source.
For each combination, a small and a large class is generated as well
as a derived class and a container class. Additionally, the following
manually-written cases are provided:
- a dynamic class (i.e. class with a virtual method)
- classes that contain an array field
- a class whose copy ctor is inlined
- a class whose destructor is deleted
- classes with multiple copy and/or move ctors
Test cases check whether GDB makes the right decision to pass an
object by value or implicitly by reference, whether really a copy of
the argument is passed, and whether the copy constructor and
destructor of the clone of the argument are invoked properly.
The input program pass-by-ref.cc is generated in the test's output
directory. The input program pass-by-ref-2.cc is manually-written.
Tests have been verified on the X86_64 architecture with
GCC 7.4.0, 8.2.0, and 9.2.1.
gdb/testsuite/ChangeLog:
2019-12-20 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/pass-by-ref.cc: Delete. Generated in the output
directory instead.
* gdb.cp/pass-by-ref.exp: Extend with more cases.
* gdb.cp/pass-by-ref-2.cc: New file.
* gdb.cp/pass-by-ref-2.exp: New file.
Change-Id: Ie8ab1f260c6ad5ee4eb34b2c1597ce24af04abb6
PR tui/18932 notes that "list" no longer works in the TUI. At some
point in the past, it switched the TUI source window to show the
specified source; but now this source briefly flashes before the TUI
reverts to showing the current stack frame's source.
This patch fixes this bug by introducing a new observer that notices
when the user selected context has changed. Then, the existing
before-prompt observer is updated to request the correct update:
either one based on the current stack frame, or one based on the
user's source symtab_and_line.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
PR tui/18932:
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Rename parameters. Handle the not-from-stack-frame case.
(from_stack, from_source_symtab): New globals.
(tui_before_prompt, tui_normal_stop): Update.
(tui_context_changed, tui_symtab_changed): New functions.
(tui_attach_detach_observers): Attach new observers.
gdb/testsuite/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* gdb.tui/list-before.exp: New file.
Change-Id: I62013825f6c1afdd568a1c7a8c019b0c881131af
I noticed that even when there's a symbol file, "tui enable" won't
show "main" by default. I think it should, and this patch fixes this.
gdb/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_enable): Call tui_display_main.
gdb/testsuite/ChangeLog
2019-12-20 Tom Tromey <tom@tromey.com>
* gdb.tui/list.exp: Check for source on initial listing.
Change-Id: Ic7bfc930e1179f5b61111e30a2dae46a98b00064
xml-support.c uses FOPEN_RT, but then reads the entire contents of the
file and verifies that the number of bytes read matches the length.
This can fail on Windows, where the read will translate line
terminators.
This patch fixes the bug by changing xml-support.c to use FOPEN_RB.
This works because expat correctly handles \r\n line terminators.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* xml-support.c (xml_fetch_content_from_file): Use FOPEN_RB.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* gdb.xml/tdesc-arch.exp (set_arch): Add "trans_mode" parameter.
Add crlf test.
Change-Id: I548438f33eed284dde1de8babf755eaa1a40319d
Now that the version number in master has been bumped to 10, I get this
failure:
FAIL: gdb.base/default.exp: show convenience ($_gdb_major = 9 not found)
Update the test accordingly.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Update value of $_gdb_major.
We need to step a second time with this gcc version.
The first step jumps back to main before entering foo.
Previously the control flow was from bar directly to foo.
Further ananlysis suggests, that this change in behavior started
with gcc-8.1.0 when -gcolumn-info was enabled by default.
The option -gcolumn-info was first implemented in gcc-7.1.0 but
default-disabled, so you can get the altered behavior already with
gcc-7 if you manually enable -gcolumn-info.
Previously there was just one point where line 30 (of skip.c) started:
[0x00000032] Advance Line by 27 to 28
[0x00000034] Copy
[0x00000035] Special opcode 63: advance Address by 4 to 0x4004cb and Line by 2 to 30
[0x00000036] Advance PC by constant 17 to 0x4004dc
[0x00000037] Special opcode 7: advance Address by 0 to 0x4004dc and Line by 2 to 32
But with -gcolumn-info enabled, we have line 30 three times with different column:
[0x00000034] Advance Line by 27 to 28
[0x00000036] Copy
[0x00000037] Set column to 9
[0x00000039] Special opcode 63: advance Address by 4 to 0x4004c6 and Line by 2 to 30
[0x0000003a] Set column to 17
[0x0000003c] Special opcode 75: advance Address by 5 to 0x4004cb and Line by 0 to 30
[0x0000003d] Set column to 3
[0x0000003f] Special opcode 75: advance Address by 5 to 0x4004d0 and Line by 0 to 30
[0x00000040] Special opcode 105: advance Address by 7 to 0x4004d7 and Line by 2 to 32
That could probably be filtered in dwarf2read.c to keep the old behavior, but
the new behavior makes still sense, even if we cannot really make use of the
column in the line number info for now.
A double-free happens when using a JIT debug info reader that creates
more than one block. In the loop that frees blocks in finalize_symtab,
at the very end, the gdb_block_iter_tmp variable is set initially, but
not changed as the loop advances. If we have two blocks, the first
iteration frees the first block, the second iteration frees the second
block, but the third iteration tries to free the second block again, as
gdb_block_iter_tmp keeps pointing on the second block.
Fix it by assigning the gdb_block_iter_tmp variable in the loop.
I have improved the jit-reader.exp test to cover this case, by adding a
second "JIT-ed" function and creating a block for it. I have renamed
the existing function to something I find a bit more descriptive. There
are no significant changes to jit-reader.exp itself, only updates
following the renaming. The important changes are in jithost.c
(generate a new function) and in jitreader.c (create a gdb_block for
that function).
This was found because of an ASan report:
$ ./gdb testsuite/outputs/gdb.base/jit-reader/jit-reader -ex "jit-reader-load /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jitreader.so" -ex r
Reading symbols from testsuite/outputs/gdb.base/jit-reader/jit-reader...
Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jit-reader
=================================================================
==1751048==ERROR: AddressSanitizer: heap-use-after-free on address 0x604000042eb8 at pc 0x5650ef8eec88 bp 0x7ffe52767290 sp 0x7ffe52767280
READ of size 8 at 0x604000042eb8 thread T0
#0 0x5650ef8eec87 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:768
#1 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#2 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#3 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#4 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#5 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#6 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
0x604000042eb8 is located 40 bytes inside of 48-byte region [0x604000042e90,0x604000042ec0)
freed by thread T0 here:
#0 0x7fbbe57376b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x5650ef8f350b in xfree<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/common-utils.h:62
#2 0x5650ef8eeca9 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:769
#3 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#4 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
previously allocated by thread T0 here:
#0 0x7fbbe5737cd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x5650eef662f3 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100
#2 0x5650ef8f34ea in xcnew<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/poison.h:122
#3 0x5650ef8ed467 in jit_block_open_impl /home/simark/src/binutils-gdb/gdb/jit.c:557
#4 0x7fbbda98620a in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:60
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
gdb/ChangeLog:
* jit.c (finalize_symtab): Set gdb_block_iter_tmp in loop.
gdb/testsuite/ChangeLog:
* gdb.base/jit-reader.exp (jit_reader_test): Rename
jit_function_00 to jit_function_stack_mangle.
* gdb.base/jithost.c (jit_function_t): Rename to...
(jit_function_stack_mangle_t): ... this.
(jit_function_add_t): New typedef.
(jit_function_00_code): Rename to...
(jit_function_stack_mangle_code): ... this, make static.
(jit_function_add_code): New.
(main): Generate "add" function and call it. Adjust to changes
in jithost_abi.
* gdb.base/jithost.h (struct jithost_abi_bounds): New.
(struct jithost_abi) <begin, end>: Remove fields.
<object, function_stack_mangle, function_add>: New fields.
* gdb.base/jitreader.c (struct reader_state) <code_begin,
code_end>: Remove fields.
<func_stack_mangle>: New field.
(read_debug_info): Adjust to renaming, create block for "add"
function.
(read_sp, unwind_frame, get_frame_id): Adjust to other changes.
Testing on another TUI series showed that some of the regexps in the
TUI test suite have been incorrect for a while. In particular, "|"
was meant literally in these tests, but was interpreted as pattern
alternation due to lack of quoting.
This patch fixes the bad tests. I am checking this in.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Fix regexp.
* gdb.tui/regs.exp: Fix regexps.
* gdb.tui/main.exp: Fix regexp.
Change-Id: Ib6661361171ac120bb92f4a8aec7efa4bcaa36b9
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_resize_all): Remove code, call
tui_apply_current_layout.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
Change-Id: I3dc6c02a753d495d9ab5e8213d550a147198ce6f
This patch introduces the first use of tui_layout, by changing
show_layout to clone and use the appropriate tui_layout.
This resulted in one minor layout change, and also in the unintended
-- but good -- side effect that the title of each boxed window is now
visible.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_apply_current_layout): Declare.
* tui/tui-layout.c (standard_layouts, applied_layout): New
globals.
(tui_apply_current_layout): New function.
(show_layout): Set applied_layout. Call
tui_apply_current_layout.
(show_source_command, show_disasm_command)
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Remove.
(initialize_layouts): New function.
(_initialize_tui_layout): Call initialize_layouts.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/regs.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
* gdb.tui/basic.exp: Update.
* lib/tuiterm.exp (_check_box): Don't check bottom border.
Change-Id: If1ee06ee58f4803e8c213f4ab0f5bb59f4650ec2
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
Add tests which check for accessibility of variables from within
various OpenMP parallel regions.
Tested on Fedora 27, 28, 29, 30, and 31. I also tested with my OpenMP
work on Fedora 30. The test has been annotated with setup_xfail and
setup_kfail statements so that there are no unexpected failures on any
of these platforms when using gcc. Better still, for my own testing
anyway, is that there are also no XPASSes or KPASSes either. So,
regardless of platform, when using gcc, and regardless of whether my
(not yet public) OpenMP work is used, seeing a FAIL indicates a real
problem.
Fedora 27 results:
# of expected passes 85
# of expected failures 65
(Note: I have not retested F27 since v1 of the patch; it's possible
that the numbers will be slightly different for v2.)
Fedora 28, 29, 30 results:
# of expected passes 131
# of expected failures 4
# of known failures 16
Fedora 30, 31 results w/ my OpenMP work:
# of expected passes 151
The above results all use gcc, either the system gcc or a development
gcc (when testing against my OpenMP work in GDB). I've also tested
with clang 9.0.0 and icc 19.0.5.281 20190815 on Fedora 31.
Fedora 31, clang:
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i02
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i12
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i22
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: after parallel: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print j
Fedora 31, icc:
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i12
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i22
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 1st thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 1st thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 1st thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print z
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 1st thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 1st thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 1st thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print z
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print k
For both clang and icc, it turns out that there are some problems with
the DWARF that these compilers generate. Of the two, icc does at
least nest the subprogram of the outlined function representing the
parallel region within the function that it's defined, but does not
handle inner scopes if they exist. clang places the subprogram for
the outlined function at the same level as the containing function, so
variables declared within the function aren't visible at all.
I could call setup_xfail to avoid FAILs for clang and icc also, but I don't
want to further complicate the test.
gdb/testsuite/ChangeLog:
* gdb.threads/omp-par-scope.c: New file.
* gdb/threads/omp-par-scope.exp: New file.
Change-Id: Icb9c991730d84ca7509380af817dfcc778e764ea
This commit adds the gdb_caching_proc, support_nested_function_tests,
to lib/gdb.exp. It tests to see whether or not the C compiler has
support for nested function calls.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (support_nested_function_tests): New proc.
Change-Id: Ic2c93bc4cc200e07e104a2398f89a9c0514bdc75
Sometimes -- notably with unchecked unions -- the Ada "ptype" code
will print a "?" or "??" to indicate something unknown. The choice of
what was printed was somewhat arbitrary, and in one case, Ada would
print an empty string rather than "?".
This patch normalizes the Ada code to use "?" rather than an empty
string or "??". My reasoning here is that a single question mark is
enough to convey unknown-ness.
gdb/ChangeLog
2019-12-10 Tom Tromey <tromey@adacore.com>
* ada-typeprint.c (print_choices): Use a single "?".
(print_variant_part): Print "?" if the discriminant name
is not known.
gdb/testsuite/ChangeLog
2019-12-10 Tom Tromey <tromey@adacore.com>
* gdb.ada/unchecked_union.exp: New file.
* gdb.ada/unchecked_union/pck.adb: New file.
* gdb.ada/unchecked_union/pck.ads: New file.
* gdb.ada/unchecked_union/unchecked_union.adb: New file.
* gdb-utils.exp (string_to_regexp): Also quote "?".
Change-Id: I3403040780a155ffa2c44c8e6a04ba86bc810e29
The documentation for make-breakpoint from the Guile API and the `spec'
variant of the gdb.Breakpoint constructor from the Python API state that
the format acceptable for location strings is the same as that accepted
by the break command. However, using the -probe qualifier at the
beginning of the location string causes a GDB internal error as it
attempts to decode a probe location in the wrong code path. Without this
functionality, there doesn't appear to be another way to set breakpoints
on probe points from Python or Guile scripts.
This patch introduces a new helper function that returns a
breakpoint_ops instance appropriate for a parsed location and updates
the Guile and Python bindings to use said function, rather than the
current hard-coded use of bkpt_breakpoint_ops. Since this logic is
duplicated in the handling of the `break' and `trace' commands, those
are also updated to call into the new helper function.
gdb/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Fix scripted probe breakpoints.
* breakpoint.c (tracepoint_probe_breakpoint_ops): Move
declaration forward.
(breakpoint_ops_for_event_location_type)
(breakpoint_ops_for_event_location): Add function definitions.
(break_command_1, trace_command): Use
breakpoint_ops_for_event_location.
* breakpoint.h (breakpoint_ops_for_event_location): Add function
declarations.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Use
breakpoint_ops_for_event_location.
* python/py-breakpoint.c (bppy_init): Use
breakpoint_ops_for_event_location.
gdb/testsuite/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Test scripted probe breakpoints.
* gdb.guile/scm-breakpoint.c (main): Add probe point.
* gdb.python/py-breakpoint.c (main): Likewise.
* gdb.guile/scm-breakpoint.exp (test_bkpt_probe): Add probe
specifier test.
* gdb.python/py-breakpoint.exp (test_bkpt_probe): Likewise.
Passing an lvalue argument to a function that takes an rvalue parameter
is not allowed per C++ rules. Consider this function:
int g (int &&x) { return x; }
Calling g as in
int i = 5;
int j = g (i);
is illegal. For instance, GCC 9.2.1 yields
~~~
test.cpp: In function ‘int main()’:
test.cpp:6:14: error: cannot bind rvalue reference of type ‘int&&’ to
lvalue of type ‘int’
6 | int j = g (i);
| ^
~~~
GDB currently allows this function call:
~~~
(gdb) print g(i)
$1 = 5
~~~
Fix this by ranking an lvalue argument incompatible with an rvalue
parameter. The behavior after this patch is:
~~~
(gdb) print g(i)
Cannot resolve function g to any overloaded instance
~~~
Tested with GCC 9.2.1.
gdb/ChangeLog:
2019-12-09 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdbtypes.c (rank_one_type): Return INCOMPATIBLE_TYPE_BADNESS
when ranking an lvalue argument for an rvalue parameter.
gdb/testsuite/ChangeLog:
2019-12-09 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/rvalue-ref-overload.cc (g): New function that takes
an rvalue parameter.
* gdb.cp/rvalue-ref-overload.exp: Test calling it with an lvalue
parameter.
Change-Id: I4a6dfc7dac63efa1e3b9f8f391e4b736fbdccdc1
Extend the output pattern in mi-fortran-modules.exp to skip some
system modules that appear with versions of GFortran after 7.x.x.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules.exp: Add patterns to skip system
modules.
Change-Id: I64aaa395e554a32e8267ffa096faee53c19c0b9e
In some cases the Fortran stride information generated by GCC is wrong
with versions of GCC after 7.x.x. This commit adds kfails for the
tests in question with known bad versions of gcc.
The bug has been reported to GCC here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92775
gdb/testsuite/ChangeLog:
* gdb.fortran/derived-type-striding.exp: KFAIL if we are using a
broken version of GCC.
Change-Id: Iaef08e5e2c87ab3d6983b88f749d40e01aea2bc6
The gdb.fortran/info-modules.exp and gdb.fortran/info-types.exp tests
are failing on versions of gfortran after 7.3 due to the inclusion of
extra "system" modules and type that were not being matched by the
current test patterns.
Rather than building increasingly complex patterns that would always
be at risk of breaking with future versions of GCC I have instead
added a new library that parses the output of the following commands:
info types
info variables
info functions
info modules
info module functions
info module variables
into a data structure, the test can than run checks against the
contents of this data structure.
The benefit is that we can simply ignore extra results that we don't
care about.
There is a small risk that a bug in GDB might allow us to start
reporting incorrect results in such a way that the new library will
not spot the error. However, I have tried to mitigate this risk by
adding extra procedures into the test library (see check_no_entry) and
we can add more in future if we wanted to be even more defensive.
I tested this test file with gFortran 7.3.1, 8.3.0, and 9.2.0, I now
see 100% pass in all cases.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: Rewrite to make use of new
sym-info-cmds library.
* gdb.fortran/info-types.exp: Likewise.
* lib/sym-info-cmds.exp: New file.
Change-Id: Iff81624f51b5afb6c95393932f3d94472d7c2970
When running the gdb testsuite with the cc-with-dwz board, I run into:
...
Running gdb/testsuite/gdb.dwarf2/imported-unit.exp ...
gdb compile failed, dwz: gdb.dwarf2/imported-unit/imported-unit: \
Couldn't find DIE referenced by DW_AT_abstract_origin
cc-with-tweaks.sh: dwz did not modify gdb.dwarf2/imported-unit/imported-unit.
...
The problem is that the DW_AT_abstract_origin reference here:
...
<0><d2>: Abbrev Number: 2 (DW_TAG_compile_unit)
<1><e6>: Abbrev Number: 4 (DW_TAG_subprogram)
<e7> DW_AT_abstract_origin: <0x142>
<eb> DW_AT_low_pc : 0x4004b2
<f3> DW_AT_high_pc : 0x4004c8
...
referring to a DIE in another compilation unit here:
...
<0><129>: Abbrev Number: 2 (DW_TAG_compile_unit)
<1><142>: Abbrev Number: 4 (DW_TAG_subprogram)
<143> DW_AT_name : main
<148> DW_AT_type : <0x13b>
<14c> DW_AT_external : 1
...
is encoded using intra-CU reference form DW_FORM_ref4 instead of intra-CU
reference DW_FORM_ref_addr:
...
4 DW_TAG_subprogram [has children]
DW_AT_abstract_origin DW_FORM_ref4
DW_AT_low_pc DW_FORM_addr
DW_AT_high_pc DW_FORM_addr
DW_AT value: 0 DW_FORM value: 0
...
Fix this in the DWARF assembler by making all inter-CU references use the '%'
label prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-12-08 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/imported-unit.exp: Fix inter-CU references.
Change-Id: I690ff18c3943705ed478453531b176ff74700f3c
This patch uses new BFD support for detecting build-ids in core
files.
After this patch, it is possible to run gdb with only the
core file, and gdb will automatically load the executable and
debug info [example from tests]:
$ gdb -nx -q
(gdb) core-file corefile-buildid.core
[New LWP 29471]
Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24...
Core was generated by `outputs/gdb.base/coref'.
Program terminated with signal SIGABRT, Aborted.
(gdb)
This work is based on functionality available in Fedora originally
written by Jan Kratochvil.
Regression tested on buildbot.
gdb/ChangeLog:
2019-12-07 Keith Seitz <keiths@redhat.com>
* build-id.c (build_id_bfd_get): Permit bfd_core, too.
(build_id_to_debug_bfd): Make static, rewriting to use
build_id_to_bfd_suffix.
(build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd,
adding `suffix' parameter. Append SUFFIX to file names
when searching for matching files.
(build_id_to_debug_bfd): Use build_id_to_bfd_suffix.
(build_id_to_exec_bfd): Likewise.
* build-id.h (build_id_to_debug_bfd): Clarify that function
searches for BFD of debug info file.
(build_id_to_exec_bfd): Declare.
* corelow.c: Include build-id.h.
(locate_exec_from_corefile_build_id): New function.
(core_target_open): If no executable BFD is found,
search for a core file BFD using build-id.
gdb/testsuite/ChangeLog:
2019-12-07 Keith Seitz <keiths@redhat.com>
* gdb.base/corefile-buildid-shlib-shr.c: New file.
* gdb.base/corefile-buildid-shlib.c: New file.
* gdb.base/corefile-buildid.c: New file.
* gdb.base/corefile-buildid.exp: New file.
Change-Id: I15e9e8e58f10c68b5cae55e2eba58df1e8aef529
Consider the DWARF as generated by gcc with the tentative patch to fix gcc
PR91507 - "wrong debug for completed array with previous incomplete
declaration":
...
<1><f4>: Abbrev Number: 2 (DW_TAG_array_type)
<f5> DW_AT_type : <0xff>
<f9> DW_AT_sibling : <0xff>
<2><fd>: Abbrev Number: 3 (DW_TAG_subrange_type)
<2><fe>: Abbrev Number: 0
<1><ff>: Abbrev Number: 4 (DW_TAG_pointer_type)
<100> DW_AT_byte_size : 8
<101> DW_AT_type : <0x105>
<1><105>: Abbrev Number: 5 (DW_TAG_base_type)
<106> DW_AT_byte_size : 1
<107> DW_AT_encoding : 6 (signed char)
<108> DW_AT_name : (indirect string, offset: 0x19f): char
<1><10c>: Abbrev Number: 6 (DW_TAG_variable)
<10d> DW_AT_name : zzz
<111> DW_AT_decl_file : 1
<112> DW_AT_decl_line : 1
<113> DW_AT_decl_column : 14
<114> DW_AT_type : <0xf4>
<118> DW_AT_external : 1
<118> DW_AT_declaration : 1
<1><118>: Abbrev Number: 2 (DW_TAG_array_type)
<119> DW_AT_type : <0xff>
<11d> DW_AT_sibling : <0x128>
<1><12f>: Abbrev Number: 8 (DW_TAG_variable)
<130> DW_AT_specification: <0x10c>
<134> DW_AT_decl_line : 2
<135> DW_AT_decl_column : 7
<136> DW_AT_type : <0x118>
<13a> DW_AT_location : 9 byte block: 3 30 10 60 0 0 0 0 0 (DW_OP_addr: 601030)
...
The DWARF will result in two entries in the symbol table, a decl with type
char *[] and a def with type char*[2].
When trying to print the value of zzz:
...
$ gdb a.spec.out -batch -ex "p zzz"
...
the decl (rather than the def) will be found in the symbol table, which is
missing the location information, and consequently we get:
...
$1 = 0x601030 <zzz>
...
[ There is a fallback mechanism that finds the address of the variable in the
minimal symbol table, but that's not used here, because the type of the decl
does not specify a size. We could use the symbol size here to get the size
of the type, but that's currently not done: PR exp/24989. Still, fixing that
PR would not fix the generic case, where minimal symbol info is not
available. ]
Fix this by preferring defs over decls when searching in the symbol table.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2019-12-06 Tom de Vries <tdevries@suse.de>
PR symtab/24971
* block.c (best_symbol, better_symbol): New function.
(block_lookup_symbol_primary, block_lookup_symbol): Prefer def over
decl.
gdb/testsuite/ChangeLog:
2019-12-06 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/varval.exp: Add decl before def test.
Change-Id: Id92326cb8ef9903b121ef9e320658eb565d0f5a9
Simplify the expected test outputs. This is a minor cleanup; no
functional change is intended.
gdb/testsuite/ChangeLog:
2019-12-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/rvalue-ref-overload.exp: Minor cleanup.
Change-Id: Ie760a2856cae3be0eeed5496765a5f1cd102d6b7
The overload resolution mechanism assigns badness values to the
necessary conversions to be made on types to pick a champion. A
badness value consists of a "rank" that scores the conversion and a
"subrank" to differentiate conversions of the same kind.
An auxiliary function, 'sum_ranks', is used for adding two badness
values. In all of its uses, except two, 'sum_ranks' is used for
populating the subrank of a badness value. The two exceptions are in
'rank_one_type':
~~~
/* See through references, since we can almost make non-references
references. */
if (TYPE_IS_REFERENCE (arg))
return (sum_ranks (rank_one_type (parm, TYPE_TARGET_TYPE (arg), NULL),
REFERENCE_CONVERSION_BADNESS));
if (TYPE_IS_REFERENCE (parm))
return (sum_ranks (rank_one_type (TYPE_TARGET_TYPE (parm), arg, NULL),
REFERENCE_CONVERSION_BADNESS));
~~~
Here, the result of a recursive call is combined with
REFERENCE_CONVERSION_BADNESS. This leads to the problem of
over-punishment by combining two ranks. Consider this:
void an_overloaded_function (const foo &);
void an_overloaded_function (const foo &&);
...
foo arg;
an_overloaded_function(arg);
When ranking 'an_overloaded_function (const foo &)', the badness
values REFERENCE_CONVERSION_BADNESS and CV_CONVERSION_BADNESS are
combined, whereas 'rank_one_type' assigns only the
REFERENCE_CONVERSION_BADNESS value to 'an_overloaded_function (const
foo &&)' (there is a different execution flow for that). This yields
in GDB picking the latter function as the overload champion instead of
the former.
In fact, the 'rank_one_type' function should have given
'an_overloaded_function (const foo &)' the CV_CONVERSION_BADNESS
value, with the see-through referencing increasing the subrank a
little bit. This can be achieved by introducing a new badness value,
REFERENCE_SEE_THROUGH_BADNESS, which bumps up the subrank only, and
using it in the two "exceptional" cases of 'sum_ranks'.
gdb/ChangeLog:
2019-12-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdbtypes.h: Define the REFERENCE_SEE_THROUGH_BADNESS value.
* gdbtypes.c (rank_one_type): Use REFERENCE_SEE_THROUGH_BADNESS
for ranking see-through reference cases.
gdb/testsuite/ChangeLog:
2019-12-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/rvalue-ref-overload.cc: Add a case that involves both
CV and reference conversion for overload resolution.
* gdb.cp/rvalue-ref-overload.exp: Test it.
Change-Id: I39ae6505ab85ad0bd21915368c82540ceeb3aae9
GDB crashes when doing:
(gdb) faas
Aborted
Do the needed check to avoid crashing.
gdb/ChangeLog
2019-12-06 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* stack.c (faas_command): Check a command is provided.
* thread.c (taas_command, tfaas_command): Likewise.
gdb/testsuite/ChangeLog
2019-12-06 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.threads/pthreads.exp: Test taas and tfaas without command.
* gdb.base/frameapply.exp: Test faas without command.
When compiling Fortran tests (e.g. gdb.fortran/info-modules.exp), the
Fotran compile produces .mod files. These files contain details of
compiled modules that are then consumed by the compiler when compiling
other files that USE a module.
Currently the compiler writes the .mod files into its current
directory, so for us this turns out to be 'build/gdb/testsuite/'.
This means that .mod files can be shared between tests, which seems
against the spirit of the GDB testsuite; source files should be
compiled fresh for each test.
This commit adds the -J option to the compiler flags whenever we
compile a Fortran file, this option tells the compiler where to write,
and look for, .mod files.
After this commit there was one Fortran test that needed fixing, with
that fix in place all of the Fortran tests pass again, but now the
.mod files are now produced in the per-test output directories.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_compile): Add -J compiler option when building
Fortran tests.
* gdb.mi/mi-fortran-modules.exp: Compile source files in correct
order.
Change-Id: I99444cf22d80e320093d3f3ed9abb8825f378e0b
Extend the Fortran parser to support 'single precision' and 'double
precision' types as well 'single complex' and 'double complex' types.
gdb/ChangeLog:
* f-exp.y (COMPLEX_KEYWORD, SINGLE, DOUBLE, PRECISION): New
tokens.
(typebase): New patterns for complex, single/double precision, and
single/double complex.
(f77_keywords): Change token for complex keyword, and add single,
double, and precision keywords.
gdb/testsuite/ChangeLog:
* gdb.fortran/type-kinds.exp (test_cast_1_to_type_kind): Handle
casting to type with no kind specified.
(test_basic_parsing_of_type_kinds): Additional tests for types
with no kind specified, and add tests for single/double
precision/complex types.
Change-Id: I9c82f4d392c58607747bd08862c1ee330723a1ba
This adds a bit-field test for scalar_storage_order.
gdb/testsuite/ChangeLog
2019-12-04 Tom Tromey <tromey@adacore.com>
* gdb.base/endianity.c (struct other) <x>: New field.
(main): Initialize it.
* gdb.base/endianity.exp: Update.
Change-Id: I9e07d1b3e08e7c3384832b68ef286afe1d11479a
A subrange type should inherit its endianity from its base type.
gdb/ChangeLog
2019-12-04 Tom Tromey <tromey@adacore.com>
* gdbtypes.c (create_range_type): Inherit endianity
from base type.
gdb/testsuite/ChangeLog
2019-12-04 Tom Tromey <tromey@adacore.com>
* gdb.ada/scalar_storage/storage.adb: New file.
* gdb.ada/scalar_storage/pck.adb: New file.
* gdb.ada/scalar_storage/pck.ads: New file.
* gdb.ada/scalar_storage.exp: New file.
Change-Id: I2998ab919dc28aeff097763c4242f9bfb90823a3
Testing the scalar_storage_order patch pointed out that it does not
handle floating point properly. This patch fixes this problem.
gdb/ChangeLog
2019-12-04 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (dwarf2_init_float_type)
(dwarf2_init_complex_target_type): Add byte_order parameter.
(read_base_type): Compute byte order earlier.
* gdbtypes.c (init_float_type): Add byte_order parameter.
* gdbtypes.h (init_float_type): Add byte_order parameter.
gdb/testsuite/ChangeLog
2019-12-04 Tom Tromey <tromey@adacore.com>
* gdb.base/endianity.c (struct otherendian) <f>: New field.
(main): Initialize it.
* gdb.base/endianity.exp: Update.
Change-Id: Ic02eb711d80ce678ef0ecf8c506a626e441b8440
Adds a new parameter -max-results to -symbol-info-functions,
-symbol-info-variables, -symbol-info-types, and -symbol-info-modules.
This parameter limits the number of results returned.
This change still leaves -symbol-info-module-functions and
-symbol-info-module-variables always returning all results, fixing
these commands is slightly harder.
There's currently no mechanism for the user of these commands to know
if the result list has been truncated if you get back the maximum
number of results, so if there are exactly 10 functions and you call
'-symbol-info-functions --max-results 10' the reply would appear no
different than if you had 20 functions and called with a max of 10.
Right now, if you get back the maximum then you should assume that
there might be more results available.
One other thing to note is that the global_symbol_searcher::search by
default returns SIZE_MAX results, there's no longer a mechanism to
return an unlimited number of results, though hopefully this will not
be a huge issue.
gdb/ChangeLog:
* mi/mi-symbol-cmds.c (mi_symbol_info): Take extra parameter, and
add it into the search spec.
(parse_max_results_option): New function.
(mi_info_functions_or_variables): Parse -max-results flag and pass
it to mi_symbol_info.
(mi_cmd_symbol_info_modules): Likewise.
(mi_cmd_symbol_info_types): Likewise.
* symtab.c (global_symbol_searcher::add_matching_symbols): Change
return type to bool, change result container into a set, and don't
add new results if we have enough already.
(global_symbol_searcher::add_matching_msymbols): Change return
type to bool, and don't add new results if we have enough already.
(sort_search_symbols_remove_dups): Delete.
(global_symbol_searcher::search): Early exit from search loop when
we have enough results. Use a std::set to collect the results
from calling add_matching_symbols.
* symtab.h (global_symbol_searcher) <set_max_seach_results>: New
member function.
(global_symbol_searcher) <m_max_search_results>: New member
variable.
(global_symbol_searcher) <add_matching_symbols>: Update header
comment and change return type to bool.
(global_symbol_searcher) <add_matching_msymbols>: Update header
comment and change return type to bool.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Add documentation of
-max-results to some -symbol-info-* commands.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-sym-info.exp: Add tests for -max-results parameter.
Change-Id: I90a28feb55b388fb46461a096c5db08b6b0bd427
Two new MI command -symbol-info-module-variables and
-symbol-info-module-functions, which are the equivalent of the CLI
command 'info module variables' and 'info module functions'. These
return information about functions and variables within Fortran
modules.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add -symbol-info-module-functions and
-symbol-info-module-variables entries.
* mi/mi-cmds.h (mi_cmd_symbol_info_module_functions): Declare.
(mi_cmd_symbol_info_module_variables): Declare.
* mi/mi-symbol-cmds.c
(module_symbol_search_iterator): New typedef.
(output_module_symbols_in_single_module_and_file): New function.
(output_module_symbols_in_single_module): New function.
(mi_info_module_functions_or_variables): New function.
(mi_cmd_symbol_info_module_functions): New function.
(mi_cmd_symbol_info_module_variables): New function.
* NEWS: Mention new MI command.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-module-functions and -symbol-info-module-variables.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules.exp: Add additional tests for
-symbol-info-module-functions and -symbol-info-module-variables.
Change-Id: Ic96f12dd14bd7e34774c3cde008fec30a4055bfe
Add support for strings with dynamic length using the DWARF attribute
DW_AT_string_length.
Currently gFortran generates DWARF for some strings that make use of
DW_AT_string_length like this:
<1><2cc>: Abbrev Number: 20 (DW_TAG_string_type)
<2cd> DW_AT_string_length: 5 byte block: 99 bd 1 0 0 (DW_OP_call4: <0x1bd>)
<2d3> DW_AT_byte_size : 4
<2d4> DW_AT_sibling : <0x2e2>
In this type entry the DW_AT_string_length attribute references a
second DW_TAG_formal_parameter that contains the string length. The
DW_AT_byte_size indicates that the length is a 4-byte value.
This commit extends GDB's DWARF parsing for strings so that we can
create dynamic types as well as static types, based on the attribute
the DWARF contains.
I then extend the dynamic type resolution code in gdbtypes.c to add
support for resolving dynamic strings.
gdb/ChangeLog:
* dwarf2read.c (read_tag_string_type): Read the fields required to
make a dynamic string, and possibly create a dynamic range for the
string.
(attr_to_dynamic_prop): Setup is_reference based on the type of
attribute being processed.
* gdbtypes.c (is_dynamic_type_internal): Handle TYPE_CODE_STRING.
(resolve_dynamic_array): Rename to...
(resolve_dynamic_array_or_string): ...this, update header comment,
and accept TYPE_CODE_STRING.
(resolve_dynamic_type_internal): Handle TYPE_CODE_STRING.
gdb/testsuite/ChangeLog:
* gdb.fortran/array-slices.exp: Add test for dynamic strings.
Change-Id: I03f2d181b26156f48f27a03c8a59f9bd4d71ac17
Currently GDB supports a byte or bit stride on arrays, in DWARF this
would be DW_AT_bit_stride or DW_AT_byte_stride on DW_TAG_array_type.
However, DWARF can also support DW_AT_byte_stride or DW_AT_bit_stride
on DW_TAG_subrange_type, the tag used to describe each dimension of an
array.
Strides on subranges are used by gFortran to represent Fortran arrays,
and this commit adds support for this to GDB.
I've extended the range_bounds struct to include the stride
information. The name is possibly a little inaccurate now, but this
still sort of makes sense, the structure represents information about
the bounds of the range, and also how to move from the lower to the
upper bound (the stride).
I've added initial support for bit strides, but I've never actually
seen an example of this being generated. Further, I don't really see
right now how GDB would currently handle a bit stride that was not a
multiple of the byte size as the code in, for example,
valarith.c:value_subscripted_rvalue seems geared around byte
addressing. As a consequence if we see a bit stride that is not a
multiple of 8 then GDB will give an error.
gdb/ChangeLog:
* dwarf2read.c (read_subrange_type): Read bit and byte stride and
create a range with stride where appropriate.
* f-valprint.c: Include 'gdbarch.h'.
(f77_print_array_1): Take the stride into account when walking the
array. Also convert the stride into addressable units.
* gdbtypes.c (create_range_type): Initialise the stride to
constant zero.
(create_range_type_with_stride): New function, initialise the
range as normal, and then setup the stride.
(has_static_range): Include the stride here. Also change the
return type to bool.
(create_array_type_with_stride): Consider the range stride if the
array isn't given its own stride.
(resolve_dynamic_range): Resolve the stride if needed.
* gdbtypes.h (struct range_bounds) <stride>: New member variable.
(struct range_bounds) <flag_is_byte_stride>: New member variable.
(TYPE_BIT_STRIDE): Define.
(TYPE_ARRAY_BIT_STRIDE): Define.
(create_range_type_with_stride): Declare.
* valarith.c (value_subscripted_rvalue): Take range stride into
account when walking the array.
gdb/testsuite/ChangeLog:
* gdb.fortran/derived-type-striding.exp: New file.
* gdb.fortran/derived-type-striding.f90: New file.
* gdb.fortran/array-slices.exp: New file.
* gdb.fortran/array-slices.f90: New file.
Change-Id: I9af2bcd1f2d4c56f76f5f3f9f89d8f06bef10d9a
This patch adds . as an allowed character for user defined commands.
Combined with 'define-prefix', this allows to e.g. define a set of Valgrind
specific user command corresponding to the Valgrind monitor commands
(such as check_memory, v.info, v.set, ...).
gdb/ChangeLog
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* command.h (valid_cmd_char_p): Declare.
* cli/cli-decode.c (valid_cmd_char_p): New function factorizing
the check of valid command char.
(find_command_name_length, valid_user_defined_cmd_name_p): Use
valid_cmd_char_p.
* cli/cli-script.c (validate_comname): Likewise.
* completer.c (gdb_completer_command_word_break_characters):
Do not remove . from the word break char, update comments.
(complete_line_internal_1): Use valid_cmd_char_p.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
* python/py-cmd.c (gdbpy_parse_command_name): Likewise.
gdb/testsuite/ChangeLog
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/define.exp: Test . in command names.
* gdb.base/setshow.exp: Update test, as . is now part of
command name.
Adds a test testing the new define-prefix command.
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/define-prefix.exp: New file.
The two guard functions skip_btrace_tests and skip_btrace_pt_tests
have a minor bug, if the check function fails to compile then surely
we should skip the btrace tests - currently we return 0 to indicate
don't skip.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (skip_btrace_tests): Return 1 if the test fails to
compile.
(skip_btrace_pt_tests): Likewise.
Change-Id: I6dfc04b4adcf5b9424fb542ece7ddbe751bee301
The Fortran test gdb.fortran/info-modules compiles the files
info-types.f90 and info-types-2.f90 in that order. Unfortunately
info-types.f90 makes use of a module defined in info-types-2.f90.
This currently doesn't cause a problem if you run all of the Fortran
tests as the info-types.exp test already compiles info-types-2.f90 and
so the module description file 'mod2.mod' will be created, and can
then be found by info-modules.exp during its compile.
If however you try to run just info-modules.exp in a clean build
directory, the test will fail to compile.
Fix this by compiling the source files in the reverse order so that
the module is compiled first, then the test program that uses the
module.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: Compile source files in correct
order.
Change-Id: Ic3a1eded0486f6264ebe3066cf1beafbd2534a91
Running a GDB with the fix for BZ 25065 should cause these new tests
to all pass.
When run against a GDB without the fix, there will be 2 unresolved
testcases. This is what I see in the gdb.sum file when I try it using
a GDB without the fix:
ERROR: GDB process no longer exists
UNRESOLVED: gdb.dwarf2/imported-unit.exp: ptype main::Foo
ERROR: Couldn't send ptype main::foo to GDB.
UNRESOLVED: gdb.dwarf2/imported-unit.exp: ptype main::foo
These are "unresolved" versus outright failures due to the fact that
GDB dies (segfaults) during the running of the test.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/imported-unit.exp: New file.
* gdb.dwarf2/imported-unit.c: New file.
Change-Id: I073fe69b81bd258951615f752df8e95b6e33a271
Add '-symbol-info-modules', an MI version of the CLI 'info modules'
command.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add 'symbol-info-modules' entry.
* mi/mi-cmds.h (mi_cmd_symbol_info_modules): Declare.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_info_modules): New function.
* NEWS: Mention new MI command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules-2.f90: New file.
* gdb.mi/mi-fortran-modules.exp: New file.
* gdb.mi/mi-fortran-modules.f90: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-modules.
Change-Id: Ibc618010d1d5f36ae8a8baba4fb9d9d724e62b0f
Add new MI commands -symbol-info-functions, -symbol-info-variables,
and -symbol-info-types which correspond to the CLI commands 'info
functions', 'info variables', and 'info types' respectively.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add '-symbol-info-functions',
'-symbol-info-types', and '-symbol-info-variables'.
* mi/mi-cmds.h (mi_cmd_symbol_info_functions): Declare.
(mi_cmd_symbol_info_types): Declare.
(mi_cmd_symbol_info_variables): Declare.
* mi/mi-symbol-cmds.c: Add 'source.h' and 'mi-getopt.h' includes.
(output_debug_symbol): New function.
(output_nondebug_symbol): New function.
(mi_symbol_info): New function.
(mi_info_functions_or_variables): New function.
(mi_cmd_symbol_info_functions): New function.
(mi_cmd_symbol_info_types): New function.
(mi_cmd_symbol_info_variables): New function.
* NEWS: Mention new commands.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-sym-info-1.c: New file.
* gdb.mi/mi-sym-info-2.c: New file.
* gdb.mi/mi-sym-info.exp: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-functions, -symbol-info-types, and
-symbol-info-variables.
Change-Id: Ic2fc6a6750bbce91cdde2344791014e5ef45642d
Christian pointed out that I had accidentally put a ChangeLog entry
into gdbserver that was meant for testsuite.
I'm checking in this patch to fix it.
Change-Id: Iba6124cea6f63539ad66494d3355fb657b78a66d
In MI mode, print_ada_task_info can crash in find_thread_ptid when
trying to print an Ada task that is no longer alive. This patch
avoids the problem by checking for this case.
Because this is Ada-specific, and because Joel approved it internally,
I am checking it in.
gdb/ChangeLog
2019-11-22 Tom Tromey <tromey@adacore.com>
* ada-tasks.c (ada_task_is_alive): Make parameter const.
(print_ada_task_info): Don't try to fetch thread id if task is not
alive.
gdb/gdbserver/ChangeLog
2019-11-22 Tom Tromey <tromey@adacore.com>
* gdb.ada/tasks.exp: Add -ada-task-info regression test.
* gdb.ada/tasks/foo.adb: Add another stopping location.
Change-Id: If25eae6507eebb7537eb8adbcbaa1fc1eec88f5c
Bernd Edlinger
Simon Marchi
Simon Marchi
Tankut Baris Aktemur
Tom Tromey
Tom Tromey
Philippe Waroquiers
Kevin Buettner
George Barrett
Andrew Burgess
Tom de Vries
Keith Seitz