This patch reorganizes the code that implements follow-fork and
detach-on-fork in preparation for implementation of those features for the
extended-remote target. The function linux-nat.c:linux_child_follow_fork
contained target-independent code mixed in with target-dependent code. The
target-independent pieces need to be accessible for the host-side
implementation of follow-fork for extended-remote Linux targets.
The changes are fairly mechanical. A new routine, follow_fork_inferior,
is implemented in infrun.c, containing those parts of
linux_child_follow_fork that manage inferiors and the inferior list. The
parts of linux_child_follow_fork that deal with LWPs and target-specifics
were left in-place. Although the order of some operations was changed, the
resulting functionality was not.
Modifications were made to the other native target follow-fork functions,
inf_ttrace_follow_fork and inf_ptrace_follow_fork, that should allow them
to work with follow_fork_inferior. Some other adjustments were necessary
in inf-ttrace.c. The changes to inf-ttrace.c and inf-ptrace.c were not
tested.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_follow_fork): Remove target-independent
code so as to work with follow_fork_inferior.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
(inf_ttrace_create_inferior): Remove reference to
inf_ttrace_vfork_ppid.
(inf_ttrace_attach): Ditto.
(inf_ttrace_detach): Ditto.
(inf_ttrace_kill): Use current_inferior instead of
inf_ttrace_vfork_ppid.
(inf_ttrace_wait): Eliminate use of inf_ttrace_vfork_ppid, report
TARGET_WAITKIND_VFORK_DONE event, delete HACK that switched the
inferior away from the parent.
* infrun.c (follow_fork): Call follow_fork_inferior instead of
target_follow_fork.
(follow_fork_inferior): New function.
(follow_inferior_reset_breakpoints): Make function static.
* infrun.h (follow_inferior_reset_breakpoints): Remove declaration.
* linux-nat.c (linux_child_follow_fork): Move target-independent
code to infrun.c:follow_fork_inferior.
Now that all Linux targets use the regset iterator, the fall back to
the deprecated target method is dropped.
gdb/ChangeLog:
* linux-nat.c (linux_nat_collect_thread_registers): Remove.
(linux_nat_make_corefile_notes): Remove.
(linux_target_install_ops): Do not set target method
'make_corefile_notes'.
* linux-tdep.c (struct linux_corefile_thread_data)<collect>:
Remove field.
(linux_corefile_thread_callback): Instead of args->collect, call
linux_collect_thread_registers.
(linux_make_corefile_notes): Remove 'collect' parameter. Return
NULL unless there is a regset iterator.
(linux_make_corefile_notes_1): Remove.
(linux_init_abi): Replace reference to linux_make_corefile_notes_1
by linux_make_corefile_notes.
* linux-tdep.h (linux_make_corefile_notes): Remove prototype.
This commit implements functions for identifying and extracting extended
ptrace event information from a Linux wait status. These are just
convenience functions intended to hide the ">> 16" used to extract the
event from the wait status word, replacing the hard-coded shift with a more
descriptive function call. This is preparatory work for implementation of
follow-fork and detach-on-fork for extended-remote linux targets.
gdb/ChangeLog:
* linux-nat.c (linux_handle_extended_wait): Call
linux_ptrace_get_extended_event.
(wait_lwp): Call linux_is_extended_waitstatus.
(linux_nat_filter_event): Call linux_ptrace_get_extended_event
and linux_is_extended_waitstatus.
* nat/linux-ptrace.c (linux_test_for_tracefork): Call
linux_ptrace_get_extended_event.
(linux_ptrace_get_extended_event): New function.
(linux_is_extended_waitstatus): New function.
* nat/linux-ptrace.h (linux_ptrace_get_extended_event)
(linux_is_extended_waitstatus): New declarations.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Call
linux_ptrace_get_extended_event.
(get_stop_pc, get_detach_signal, linux_low_filter_event): Call
linux_is_extended_waitstatus.
---
This is an obvious replacement of "fprintf (stderr..." by
"fprintf_unfiltered (gdb_stdlog...", which is the standard to use in
these cases.
gdb/ChangeLog:
2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/7233
* linux-nat.c (linux_nat_wait_1): Replace "fprintf (stderr..." by
"fprintf_unfiltered (gdb_stdlog...)".
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
This patch removes some GDBSERVER checks from nat/linux-ptrace.c.
Currently the code uses a compile-time check to decide whether some
flags should be used. This changes the code to instead let users of
the module specify an additional set of flags; and then changes gdb's
linux-nat.c to call this function. At some later date, when the back
ends are fully merged, we will be able to remove this function again.
gdb/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* nat/linux-ptrace.c (additional_flags): New global.
(linux_test_for_tracesysgood, linux_test_for_tracefork): Use
additional_flags; don't check GDBSERVER.
(linux_ptrace_set_additional_flags): New function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Declare.
* linux-nat.c (_initialize_linux_nat): Call
linux_ptrace_set_additional_flags.
Since we use tkill everywhere, using kill to try to kill each lwp
individually looks suspiciously odd. We should really be using tgkill
everywhere, but at least while we don't get there this makes us
consistent.
gdb/gdbserver/
2014-07-16 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill_one_lwp): Use kill_lwp, not kill.
gdb/
2014-07-16 Pedro Alves <palves@redhat.com>
* linux-nat.c (kill_callback): Use kill_lwp, not kill.
The fix that went into GDBserver is also needed on the GDB side.
Although most compilers follow right-to-left evaluation order, the
order of evaluation of a function call's arguments is really
unspecified. target_pid_to_str may well clobber errno when we get to
evaluate the third argument to fprintf_unfiltered.
gdb/
2014-07-15 Pedro Alves <palves@redhat.com>
* linux-nat.c (kill_callback): Save errno and work with saved
copy.
I'm seeing a ton of new FAILs in fork-related tests. Like, these and
many more:
+FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to vfork (2nd time) (timeout)
+FAIL: gdb.base/disp-step-syscall.exp: vfork: display/i $pc (timeout)
...
-PASS: gdb.base/foll-vfork.exp: exec: vfork parent follow, through step: step
+FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, through step: step (timeout)
-PASS: gdb.base/foll-vfork.exp: exec: vfork parent follow, to bp: continue to bp
+FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, to bp: continue to bp (timeout)
...
FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: breakpoint (A) after the first fork (timeout)
FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: watchpoint A after the first fork (timeout)
FAIL: gdb.base/fileio.exp: System(3) call (timeout)
FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: watchpoint B after the first fork (timeout)
-PASS: gdb.base/multi-forks.exp: run to exit 2
+FAIL: gdb.base/multi-forks.exp: run to exit 2 (timeout)
...
PASS: gdb.base/watch-vfork.exp: Watchpoint on global variable (hw)
-PASS: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw)
+FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (timeout)
PASS: gdb.base/watch-vfork.exp: Watchpoint on global variable (sw)
-PASS: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (sw)
+FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (sw) (timeout)
Three issues with
https://sourceware.org/ml/gdb-patches/2014-06/msg00348.html
(c077881a).
- The inner 'status' local is shadowing the outer 'status' local,
thus PTRACE_DETACH is never seeing the status it intends to pass on
the inferior.
- With that fixed, we then try to pass down the SIGTRAP that results
from the step to the inferior. Need to filter out signals that are
in nopass state.
- For software single-step archs, the current code is equivalent to:
int status = 0;
if (WIFSTOPPED (status))
ptrace (PTRACE_DETACH, child_pid, 0, WSTOPSIG (status));
... and status == 0 is WIFEXITED, not WIFSTOPPED, so we're never
detaching.
gdb/
2014-06-09 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_child_follow_fork): Initialize status with
W_STOPCODE (0) instead of 0. Remove shodowing 'status' local from
inner block. Only pass the signal to PTRACE_DETACH if in pass
state.
https://sourceware.org/ml/gdb-patches/2014-04/msg00047.html
Got gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (sw)
(timeout) with Linux 2.6.32 and older version.
The rootcause is after the test use "set can-use-hw-watchpoints 0" let GDB
doesn't use hardware breakpoint and set a watchpoint on "global", GDB
continue will keep single step inside function "vfork".
The Linux 2.6.32 and older version doesn't have commit
6580807da14c423f0d0a708108e6df6ebc8bc83d (get more info please goto
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=6580807da14c423f0d0a708108e6df6ebc8bc83d).
When the function "vfork" do syscall, the single step flag TIF_SINGLESTEP
will copy to child process.
Then GDB detach it, child process and parent process will be hanged.
So I make a patch that do a single step before detach. Then TIF_SINGLESTEP
of child process in old Linux kernel will be cleared before detach.
Child process in new Linux kernel will not be affected by this single step.
2014-06-08 Hui Zhu <hui@codesourcery.com>
* common/linux-ptrace.c (linux_disable_event_reporting): New
function.
* common/linux-ptrace.h (linux_disable_event_reporting): New
declaration.
* linux-nat.c (linux_child_follow_fork): Do a single step before
detach.
This constifies the "args" argument to the target_ops to_attach
method.
I updated all instances of the method. I could not compile all of
them but I hand-inspected them. In all cases either the argument is
ignored, or it is passed to parse_pid_to_attach. (linux-nat does some
extra stuff, but that one I built...)
If you want to try it on your host of choice, please do so.
The code in parse_pid_to_attach seems a little bogus to me. If there
is a platform with a broken strtoul, we have better methods for fixing
the issue now. However, I left the code as is since it is clearly ok
to do so.
Built and regtested on x86-64 Fedora 20.
2014-06-04 Tom Tromey <tromey@redhat.com>
* procfs.c (procfs_attach): Make "args" const.
* windows-nat.c (windows_attach): Make "args" const.
* nto-procfs.c (procfs_attach): Make "args" const.
* inf-ttrace.c (inf_ttrace_attach): Make "args" const.
* go32-nat.c (go32_attach): Make "args" const.
* gnu-nat.c (gnu_attach): Make "args" const.
* darwin-nat.c (darwin_attach): Make "args" const.
* inf-ptrace.c (inf_ptrace_attach): Make "args" const.
* linux-nat.c (linux_nat_attach): Make "args" const.
* remote.c (extended_remote_attach_1, extended_remote_attach):
Make "args" const.
* target.h (struct target_ops) <to_attach>: Make "args" const.
(find_default_attach): Likewise.
* utils.c (parse_pid_to_attach): Make "args" const.
* utils.h (parse_pid_to_attach): Update.
linux_nat_resume is not considering that linux_ops->to_resume may throw:
/* Mark LWP as not stopped to prevent it from being continued by
linux_nat_resume_callback. */
lp->stopped = 0;
if (resume_many)
iterate_over_lwps (ptid, linux_nat_resume_callback, NULL);
If something within linux_nat_resume_callback throws, GDB leaves the
lwp_info as if the inferior was resumed, while it actually wasn't.
A couple examples, there are possibly others:
- i386_linux_resume calls target_read which calls QUIT.
- if the actual ptrace resumption fails in inf_ptrace_resume,
perror_with_name is called.
If the user tries to kill the inferior at this point (or quit, which
offers to kill), GDB locks up trying to stop the lwp -- if it is
already stopped no new waitpid event gets generated for it.
Fix this by setting the stopped flag earlier, as soon as we collect a
stop event with waitpid, and clearing it always only after resuming
the lwp successfully.
Tested on x86_64 Fedora 20. Confirmed the lock-up disappears using a
local hack that forces an error in inf_ptrace_resume.
Also fixes a little "set debug lin-lwp" annoyance. Currently we always see:
Continuing.
LLR: Preparing to resume process 6802, 0, inferior_ptid Thread 0x7ffff7fc7740 (LWP 6802)
^^^^^^^^
RC: Resuming sibling Thread 0x7ffff77c5700 (LWP 6807), 0, resume
RC: Resuming sibling Thread 0x7ffff7fc6700 (LWP 6806), 0, resume
RC: Not resuming sibling Thread 0x7ffff7fc7740 (LWP 6802) (not stopped)
^^^^^^^^^^^^^^^^^^^^^^^
LLR: PTRACE_CONT process 6802, 0 (resume event thread)
This patch gets rid of the "Not resuming sibling" line.
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/15713
* linux-nat.c (linux_nat_resume_callback): Rename the second
parameter to 'except'. Skip LP if it points to EXCEPT.
(linux_nat_resume): Don't mark the event lwp as not stopped
before resuming sibling lwps. Instead ask
linux_nat_resume_callback to skip the event lwp. Mark it as not
stopped after actually resuming it.
(linux_handle_syscall_trap): Mark the lwp as not stopped after
resuming it.
(wait_lwp): Mark the lwp as stopped here.
(stop_wait_callback): Mark the lwp as not stopped right after
resuming it. Don't mark lwps as stopped here.
(linux_nat_filter_event): Mark the lwp as stopped earlier.
(linux_nat_wait_1): Don't mark dead lwps as stopped here.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
On Linux, we need to explicitly ptrace attach to all lwps of a
process. Because GDB might not be connected yet when an attach is
requested, and thus it may not be possible to activate thread_db, as
that requires access to symbols (IOW, gdbserver --attach), a while ago
we make linux_attach loop over the lwps as listed by /proc/PID/task to
find the lwps to attach to.
linux_attach_lwp_1 has:
...
if (initial)
/* If lwp is the tgid, we handle adding existing threads later.
Otherwise we just add lwp without bothering about any other
threads. */
ptid = ptid_build (lwpid, lwpid, 0);
else
{
/* Note that extracting the pid from the current inferior is
safe, since we're always called in the context of the same
process as this new thread. */
int pid = pid_of (current_inferior);
ptid = ptid_build (pid, lwpid, 0);
}
That "safe" comment referred to linux_attach_lwp being called by
thread-db.c. But this was clearly missed when a new call to
linux_attach_lwp_1 was added to linux_attach. As a result,
current_inferior will be set to some random process, and non-initial
lwps of the second inferior get assigned the pid of the wrong
inferior. E.g., in the case of attaching to two inferiors, for the
second inferior (and so on), non-initial lwps of the second inferior
get assigned the pid of the first inferior. This doesn't trigger on
the first inferior, when current_inferior is NULL, add_thread switches
the current inferior to the newly added thread.
Rather than making linux_attach switch current_inferior temporarily
(thus avoiding further reliance on global state), or making
linux_attach_lwp_1 get the tgid from /proc, which add extra syscalls,
and will be wrong in case of the user having originally attached
directly to a non-tgid lwp, and then that lwp spawning new clones (the
ptid.pid field of further new clones should be the same as the
original lwp's pid, which is not the tgid), we note that callers of
linux_attach_lwp/linux_attach_lwp_1 always have the right pid handy
already, so they can pass it down along with the lwpid.
The only other reason for the "initial" parameter is to error out
instead of warn in case of attach failure, when we're first attaching
to a process. There are only three callers of
linux_attach_lwp/linux_attach_lwp_1, and each wants to print a
different warn/error string, so we can just move the error/warn out of
linux_attach_lwp_1 to the callers, thus getting rid of the "initial"
parameter.
There really nothing gdbserver-specific about attaching to two
threaded processes, so this adds a new test under gdb.multi/. The
test passes cleanly against the native GNU/Linux target, but
fails/triggers the bug against GDBserver (before the patch), with the
native-extended-remote board (as plain remote doesn't support
multi-process).
Tested on x86_64 Fedora 17, with the native-extended-gdbserver board.
gdb/gdbserver/
2014-04-25 Pedro Alves <palves@redhat.com>
PR server/16255
* linux-low.c (linux_attach_fail_reason_string): New function.
(linux_attach_lwp): Delete.
(linux_attach_lwp_1): Rename to ...
(linux_attach_lwp): ... this. Take a ptid instead of a pid as
argument. Remove "initial" parameter. Return int instead of
void. Don't error or warn here.
(linux_attach): Adjust to call linux_attach_lwp. Call error on
failure to attach to the tgid. Call warning when failing to
attach to an lwp.
* linux-low.h (linux_attach_lwp): Take a ptid instead of a pid as
argument. Remove "initial" parameter. Return int instead of
void. Don't error or warn here.
(linux_attach_fail_reason_string): New declaration.
* thread-db.c (attach_thread): Adjust to linux_attach_lwp's
interface change. Use linux_attach_fail_reason_string.
gdb/
2014-04-25 Pedro Alves <palves@redhat.com>
PR server/16255
* common/linux-ptrace.c (linux_ptrace_attach_warnings): Rename to ...
(linux_ptrace_attach_fail_reason): ... this. Remove "warning: "
and newline from built string.
* common/linux-ptrace.h (linux_ptrace_attach_warnings): Rename to ...
(linux_ptrace_attach_fail_reason): ... this.
* linux-nat.c (linux_nat_attach): Adjust to use
linux_ptrace_attach_fail_reason.
gdb/testsuite/
2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
Pedro Alves <palves@redhat.com>
PR server/16255
* gdb.multi/multi-attach.c: New file.
* gdb.multi/multi-attach.exp: New file.
ps -e | grep a.out
28886 pts/12 00:00:00 a.out
gdb -p 28886
Loaded symbols for /lib64/ld-linux-x86-64.so.2
0x0000003b0ccbc970 in __nanosleep_nocancel () from /lib64/libc.so.6
../../binutils-gdb/gdb/cleanups.c:265: internal-warning: restore_my_cleanups has found a stale cleanup
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The backtrace of this issue:
(gdb) bt
file=0x8b0c10 "s' failed.", line=265, fmt=0x8b0c38 "nutils-gdb/gdb/cleanups.c",
ap=0x7fff803e3ed8) at ../../binutils-gdb/gdb/utils.c:748
fmt=0x8b0c38 "nutils-gdb/gdb/cleanups.c", ap=0x7fff803e3ed8)
at ../../binutils-gdb/gdb/utils.c:799
string=0x8b0c38 "nutils-gdb/gdb/cleanups.c") at ../../binutils-gdb/gdb/utils.c:809
at ../../binutils-gdb/gdb/cleanups.c:265
at ../../binutils-gdb/gdb/cleanups.c:276
at ../../binutils-gdb/gdb/exceptions.c:142
at ../../binutils-gdb/gdb/exceptions.c:203
command=0x5d5fb8 <attach_command_continuation_free_args+18>, arg=0x7fff803e525b "2914",
from_tty=1, mask=RETURN_MASK_ALL) at ../../binutils-gdb/gdb/exceptions.c:549
---Type <return> to continue, or q <return> to quit---
func_args=0x7fff803e4280, errstring=0x8cf2e4 "/local/bin", mask=RETURN_MASK_ALL)
at ../../binutils-gdb/gdb/exceptions.c:522
This is a new issue. It is introduced by commit https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=8bc2fe488957946d2cdccda3ce8d4f39e4003ea0
It removed the discard_cleanups (back_to) inside attach_command.
Then restore_my_cleanups will throw a internal_warning.
https://sourceware.org/ml/gdb-patches/2014-03/msg00374.html
2014-03-21 Hui Zhu <hui@codesourcery.com>
Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_pid_to_exec_file): Change xmalloc to
static buffer.
* fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
* linux-nat.c (linux_child_pid_to_exec_file): Ditto.
* nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.
Looking at target_terminal_inferior etc. in async mode, I realized
that the naming of the terminal_inferior, terminal_ours,
etc. functions doesn't really give a clue that they're meant for the
native target only. This patch renames them. There's already
child_terminal_info using the child_ prefix, and, they're most
prominently installed by inf-child.c, so I went with the child_
prefix. I dropped "inferior" from a couple to make the name match the
corresponding target method.
Tested on x86_64 Fedora 17, and cross built for mingw. I didn't test
gnu-nat.c, but I think the change is as obvious as it gets. I grepped
the tree looking for other potential spots that would need adjustment
but this is all I found. If something breaks, it should be trivial to
fix.
gdb/
2014-03-14 Pedro Alves <palves@redhat.com>
* inferior.h (terminal_ours_for_output): Rename to ...
(child_terminal_ours_for_output): ... this.
(terminal_save_ours): Rename to ...
(child_terminal_save_ours): ... this.
(terminal_ours): Rename to ...
(child_terminal_ours): ... this.
(terminal_inferior): Rename to ...
(child_terminal_inferior): ... this.
(terminal_init_inferior): Rename to ...
(child_terminal_init_inferior): ... this.
(terminal_init_inferior_with_pgrp): Rename to ...
(child_terminal_init_inferior_with_pgrp): ... this.
* inflow.c (terminal_init_inferior_with_pgrp): Rename to ...
(child_terminal_init_with_pgrp): ... this.
(terminal_save_ours): Rename to ...
(child_terminal_save_ours): ... this.
(terminal_init_inferior): Rename to ...
(child_terminal_init): ... this. Adjust.
(terminal_inferior): Rename to ...
(child_terminal_inferior): ... this.
(terminal_ours_for_output): Rename to ...
(child_terminal_ours_for_output): ... this. Adjust.
(terminal_ours): Rename to ...
(child_terminal_ours): ... this.
(terminal_ours_1): Rename to ...
(child_terminal_ours_1): ... this. Adjust.
* linux-nat.c (linux_nat_terminal_inferior): Adjust.
* windows-nat.c (do_initial_windows_stuff): Adjust.
* gnu-nat.c (gnu_terminal_init_inferior): Rename to ...
(gnu_terminal_init): ... this. Adjust.
(gnu_target): Adjust.
* inf-child.c (inf_child_target): Adjust.
So that gdbserver's Linux backend can use it too.
gdb/
2014-02-27 Pedro Alves <palves@redhat.com>
PR 12702
* linux-nat.c (status_to_str): Moved to nat/linux-waitpid.c.
* nat/linux-waitpid.c: Include string.h.
(status_to_str): Moved here and made extern.
* nat/linux-waitpid.h (status_to_str): New declaration.
Doug Evans
Gary Benson
Don Breazeal
Andreas Arnez
Sergio Durigan Junior
Doug Evans
Pedro Alves
Tom Tromey
Hui Zhu