After the previous patch, this is the last remaining use of a volatile
struct gdb_exception. Kill it, as it's troublesome for C++: we can't
assign volatile <-> non-volatile without copy constructors /
assignment operators that do that, which I'd rather avoid.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* main.c (handle_command_errors): Remove volatile qualifier from
parameter.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
In C, an enum or structure defined inside other structure has global
scope just like it had been defined outside the struct in the first
place. However, in C++, such a nested structure is given a name that
is nested inside the structure. This patch moves such affected
structures/enums out to global scope, so that code using them works
the same in C++ as it works today in C.
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* dwarf2-frame.c (enum cfa_how_kind, struct
dwarf2_frame_state_reg_info): Move out of struct
dwarf2_frame_state.
* dwarf2read.c (struct tu_stats): Move out of struct
dwarf2_per_objfile.
(struct file_entry): Move out of struct line_header.
(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
typedef_field_list): Move out of struct field_info.
* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
Move out of struct dynamic_prop.
(union type_owner, union field_location, struct field, struct
range_bounds, union type_specific): Move out of struct main_type.
(struct fn_fieldlist, struct fn_field, struct typedef_field)
(VOFFSET_STATIC): Move out of struct cplus_struct_type.
(struct call_site_target, union call_site_parameter_u, struct
call_site_parameter): Move out of struct call_site.
* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
m32c_prologue.
(enum srcdest_kind): Move out of struct srcdest.
* main.c (enum cmdarg_kind): Move out of struct cmdarg.
* prologue-value.h (enum prologue_value_kind): Move out of struct
prologue_value.
* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
gdbarch_tdep.
* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
out of struct field_info.
* symfile.h (struct other_sections): Move out of struct
section_addr_info.
* symtab.c (struct symbol_cache_slot): Move out struct
block_symbol_cache.
* target-descriptions.c (enum tdesc_type_kind): Move out of
typedef struct tdesc_type.
* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
struct tui_line_or_address.
* value.c (enum internalvar_kind, union internalvar_data): Move
out of struct internalvar.
* xtensa-tdep.h (struct ctype_cache): Move out of struct
gdbarch_tdep.
Doing:
gdb --pid=PID -ex run
Results in GDB getting a SIGTTIN, and thus ending stopped. That's
usually indicative of a missing target_terminal_ours call.
E.g., from the PR:
$ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run
[1] 28263
[1] Killed sleep 1h
[2]+ Stopped gdb -batch sleep $p -ex run
The workaround is doing:
gdb -ex "attach $PID" -ex "run"
instead of
gdb [-p] $PID -ex "run"
With the former, gdb waits for the attach command to complete before
moving on to the "run" command, because the interpreter is in sync
mode at this point, within execute_command. But for the latter,
attach_command is called directly from captured_main, and thus misses
that waiting. IOW, "run" is running before the attach continuation
has run, before the program stops and attach completes. The broken
terminal settings are just one symptom of that. Any command that
queries or requires input results in the same.
The fix is to wait in catch_command_errors (which is specific to
main.c nowadays), just like we wait in execute_command.
gdb/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* main.c: Include "infrun.h".
(catch_command_errors, catch_command_errors_const): Wait for the
foreground command to complete.
* top.c (maybe_wait_sync_command_done): New function, factored out
from ...
(maybe_wait_sync_command_done): ... here.
* top.h (maybe_wait_sync_command_done): New declaration.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
Various warnings are emitted during startup and option-parsing using
fprintf_unfiltered. One warning is prefixed with the command name,
the others are not. This commit replaces these hardwired warnings
with calls to warning. It also sets warning_pre_print to prefix all
warnings with the command name until option parsing is complete.
gdb/ChangeLog:
* main.c (captured_main): Use warning during startup.
Prefix startup warning messages with command name.
This commit replaces the hardwired fprintf/exit error handlers
for usage errors with calls to error.
gdb/ChangeLog:
* main.c (captured_main): Handle usage errors with error.
If the requested interpreter cannot be set captured_main reports the
error with a hardwired fprintf/exit pair. A fprintf/exit pair on the
previous line was replaced with a call to error in March 2003
(https://sourceware.org/ml/gdb-patches/2003-03/msg00444.html) but I
found no documentation as to why this particular hardwired handler
was left untouched. I was also unable to come up with a situation
where error would not be suitable, so I have replaced it with a call
to error.
gdb/ChangeLog:
* main.c (captured_main): Replace a fprintf/exit
pair with a call to error. Wrap the message with _().
This constifies exec_file_attach and updates the rest of gdb.
Insight will need some minor tweaks after this, though it's worth
noting that I think all that hook stuff can actually just go away. I
sent a patch to this effect once, but since the Insight source
repository situation isn't currently resolved there wasn't a
convenient way to test it.
2014-07-30 Tom Tromey <tromey@redhat.com>
* corefile.c (hook_type, call_extra_exec_file_hooks)
(specify_exec_file_hook): Constify.
* exec.c (exec_file_attach): Make "filename" const.
* gdbcore.h (deprecated_exec_file_display_hook)
(specify_exec_file_hook, exec_file_attach): Constify.
* main.c (captured_main): Use catch_command_errors_const.
This fixes:
$ ./gdb program -ex "set height 2" -ex "start"
...
Reading symbols from /home/pedro/gdb/tests/threads...done.
---Type <return> to continue, or q <return> to quit---^CQuit << ctrl-c triggers a Quit
*type something*
readline: readline_callback_read_char() called with no handler!
Aborted
$
Usually, if an error propagates all the way to the top level, we'll
re-enable stdin, in case the command that was running was a
synchronous command. That's done in the event loop's actual loop
(event-loop.c:start_event_loop). However, if a foreground execution
command is run before the event loop starts and throws, nothing is
presently reenabling stdin, which leaves sync_execution set.
When we do start the event loop, because sync_execution is still
(mistakenly) set, display_gdb_prompt removes the readline input
callback, even though stdin is registered in the event loop. Any
input from here on results in readline aborting.
Such commands are run through catch_command_errors,
catch_command_errors_const, so add the tweak there.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* main.c: Include event-top.h.
(handle_command_errors): New function.
(catch_command_errors, catch_command_errors_const): Use it.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-execution-startup.c: New file.
* gdb.base/paginate-execution-startup.exp: New file.
* lib/gdb.exp (pagination_prompt): New global.
(default_gdb_spawn): New procedure, factored out from
default_gdb_spawn.
(default_gdb_start): Adjust to call default_gdb_spawn.
(gdb_spawn): New procedure.
We'll need to add error handling code to commands run before the event
loop starts (commands in .gdbinit, -ex commands, etc.). Turns out
those are run through catch_command_errors, and, catch_command_errors
is used nowhere else. Move it (and the _const variant) to main.c, so
that we can further specialize it freely.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* exceptions.c (catch_command_errors, catch_command_errors_const):
Moved to main.c.
* exceptions.h (catch_command_errors_ftype)
(catch_command_errors_const_ftype): Moved to main.c.
(catch_command_errors, catch_command_errors_const): Delete
declarations.
* main.c (catch_command_errors_ftype)
(catch_command_errors_const_ftype): Moved here from exceptions.h.
(catch_command_errors, catch_command_errors_const)): Moved here
from exceptions.c and make static.
This commit wraps calls to the demangler with a segmentation fault
handler. The first time a segmentation fault is caught a core file
is generated and the user is prompted to file a bug and offered the
choice to exit or to continue their GDB session. A maintainence
option is provided to allow the user to disable the crash handler
if required.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check.
* configure: Regenerate.
* config.in: Likewise.
* main.c (signal.h): New include.
(setup_alternate_signal_stack): New function.
(captured_main): Call the above.
* cp-support.c (signal.h): New include.
(catch_demangler_crashes): New flag.
(SIGJMP_BUF): New define.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
(gdb_demangle_jmp_buf): New static global.
(gdb_demangle_attempt_core_dump): Likewise.
(gdb_demangle_signal_handler): New function.
(gdb_demangle): If catch_demangler_crashes is set, install the
above signal handler before calling bfd_demangle, and restore
the original signal handler afterwards. Display the offending
symbol and call demangler_warning the first time a segmentation
fault is caught.
(_initialize_cp_support): New maint set/show command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint set/show catch-demangler-crashes" option.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
gdb/
2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Constification.
* main.c (captured_main): Replace catch_command_errors by
catch_command_errors_const. Twice.
* symfile.c (symbol_file_add_main_1): Make args parameter const.
(symbol_file_add): Make name parameter const.
(symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
(symfile_bfd_open): Make name parameter const, rename it to cname. Add
variable name. Change their usage accordingly.
* symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
const.
(symbol_file_add_main): Make args parameter const.
A following patch will want to make the "gdbinit" global array const.
As usual, that forces in a cascading series of const additions. This
patch preemptively does those. I went all the way up to constifying
catch_command_errors, but then that would require constifying
execute_command as well (which is a much more significant effort). So
as stop point, I found the cleanest would be to add a variant of
catch_command_errors that takes const args, and use that in the few
spots that needed it due to the the get_init_files constification.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (source_script): Make 'file' parameter const.
* cli/cli-cmds.h (source_script): Likewise.
* exceptions.c (catch_command_errors_const): New function.
* exceptions.h (catch_command_errors_const): Declare.
* main.c (get_init_files): Make parameters const, and adjust.
(captured_main): Make 'system_gdbinit', 'home_gdbinit' and
'local_gdbinit' locals const. Adjust to use
catch_command_errors_const.
(print_gdb_help): Make 'system_gdbinit', 'home_gdbinit' and
'local_gdbinit' locals const.
* top.c (print_gdb_configuration): New function, displays the
details about GDB configure-time parameters.
(print_gdb_version): Mention "show configuration".
* cli/cli-cmds.c (show_configuration): New function.
(_initialize_cli_cmds): Add the "show configuration" command.
* main.c (captured_main) <print_configuration>: New static var.
<long_options>: Use it.
If --configuration was given, call print_gdb_configuration.
* doc/gdb.texinfo (Mode Options): Document '-configuration'.
(Help): Document "show configuration".
(Bug Reporting): Add requirements to include the configuration
details in bug reports.
windows-nat.c (windows_get_absolute_argv0): New function.
windows-nat.h: Add its prototype.
main.c (get_init_files): Use filename_ncmp instead of strncmp.
Use IS_DIR_SEPARATOR instead of looking for a character inside
SLASH_STRING. Include filenames.h.
(captured_main) [__MINGW32__]: Make argv[0] absolute, so that
relocate_gdb_directory works when passed gdb_program_name.
Include windows-nat.h.
* NEWS: Add entry.
* event-top.c: #include "maint.h".
* main.c: #include "maint.h".
* maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
timeval-utils.h, maint.h, cli/cli-setshow.h.
(per_command_time, per_command_space): New static globals.
(per_command_symtab): New static global.
(per_command_setlist, per_command_showlist): New static globals.
(struct cmd_stats): Move here from utils.c.
(set_per_command_time): Renamed from set_display_time in utils.c
and moved here. All callers updated.
(set_per_command_space): Renamed from set_display_space in utils.c
and moved here. All callers updated.
(count_symtabs_and_blocks): New function.
(report_command_stats): Moved here from utils.c. Add support for
printing symtab stats. Only print data if enabled before command
executed.
(make_command_stats_cleanup): Ditto.
(sert_per_command_cmd, show_per_command_cmd): New functions.
(_initialize_maint_cmds): Add new commands
mt set per-command {space,time,symtab} {on,off}.
* maint.h: New file.
* top.c: #include "maint.h".
* utils.c (reset_prompt_for_continue_wait_time): New function.
(get_prompt_for_continue_wait_time): New function.
* utils.h (reset_prompt_for_continue_wait_time): Declare
(get_prompt_for_continue_wait_time): Declare.
(make_command_stats_cleanup): Moved to maint.h.
(set_display_time, set_display_space): Moved to maint.h and renamed
to set_per_command_time, set_per_command_space.
* cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
parse_binary_operation and made non-static. Don't call error,
just return an error marker. All callers updated.
* cli/cli-setshow.h (parse_cli_boolean_value): Declare.
doc/
* gdb.texinfo (Maintenance Commands): Add docs for
"mt set per-command {space,time,symtab} {on,off}".
testsuite/
* gdb.base/maint.exp: Update tests for per-command stats.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
(get_init_files): If --data-directory is provided,
and SYSTEM_GDBINIT lives in data-directory, look for it there.
* NEWS: Mention it.
doc/
* gdb.texinfo (System-wide configuration): If the system-wide init
file lives in the data-directory, and --data-directory is provided,
look for it there.
and delete reference to --use-deprecated-index-sections.
* symfile.h (use_deprecated_index_sections): Delete.
* dwarf2read.c (use_deprecated_index_sections): Make static.
(read_index_from_section): Update wording of how to load
deprecated index sections.
(_initialize_dwarf2_read): New options
"set/show use-deprecated-index-sections".
* main.c (captured_main): Delete --use-deprecated-index-sections.
doc/
* gdb.texinfo (Mode Options): Delete --use-deprecated-index-sections.
(Index Files): Document how to control the use of deprecated index
sections.
(Index Section Format): Replace --use-deprecated-index-sections with
"set use-deprecated-index-sections on".
Execute -ix and -iex only after system and user gdbinit files.
* main.c (captured_main): Move CMDARG_INIT_FILE and CMDARG_INIT_COMMAND
processing down after gdbinit files.
gdb/doc/
* gdb.texinfo (File Options): Change -ix and -iex commands that apply
only after gdbinit files.
(Startup): Move -iex and -iex commands down after gdbinit files.
New option "set auto-load safe-path".
* NEWS: New commands "set auto-load safe-path"
and "show auto-load safe-path".
* auto-load.c: Include gdb_vecs.h, readline/tilde.h and completer.h.
(auto_load_safe_path, auto_load_safe_path_vec)
(auto_load_safe_path_vec_update, set_auto_load_safe_path)
(show_auto_load_safe_path, add_auto_load_safe_path, filename_is_in_dir)
(filename_is_in_auto_load_safe_path_vec, file_is_auto_load_safe): New.
(source_gdb_script_for_objfile): New variable is_safe. Call
file_is_auto_load_safe. Return if it is not.
(struct loaded_script): New field loaded.
(maybe_add_script): Add parameter loaded. Initialize SLOT with it.
(print_script): Use LOADED indicator instead of FULL_PATH. Change
output "Missing" to "No".
(_initialize_auto_load): New variable cmd. Initialize
auto_load_safe_path. Register "set auto-load safe-path",
"show auto-load safe-path" and "add-auto-load-safe-path".
* auto-load.h (maybe_add_script): Add parameter loaded.
(file_is_auto_load_safe): New declaration.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: New parameters --with-auto-load-safe-path
and --without-auto-load-safe-path.
* linux-thread-db.c (try_thread_db_load_from_pdir_1)
(try_thread_db_load_from_dir): Check file_is_auto_load_safe first.
* main.c (captured_main): Check file_is_auto_load_safe for
LOCAL_GDBINIT.
* python/py-auto-load.c (gdbpy_load_auto_script_for_objfile): New
variable is_safe. Call file_is_auto_load_safe. Return if it is not.
(source_section_scripts): Call file_is_auto_load_safe. Return if it is
not.
gdb/doc/
New option "set auto-load safe-path".
* gdb.texinfo (Auto-loading): Extend the "show auto-load"
and "info auto-load" examples for safe-path. Put there also references
for "set auto-load safe-path" and "show auto-load safe-path".
New menu item for Auto-loading safe path.
(Auto-loading safe path): New node.
(Python Auto-loading): Update the expected output from "Missing"
to "No".
gdb/testsuite/
New option "set auto-load safe-path".
* gdb.python/py-objfile-script.exp (set auto-load safe-path): New.
* gdb.python/py-section-script.exp (set auto-load safe-path): New.
auto-load: Implementation.
* NEWS: New descriptions for "info auto-load",
"info auto-load gdb-scripts", "info auto-load python-scripts",
"info auto-load local-gdbinit" and "info auto-load libthread-db".
Deprecate "info auto-load-scripts", "set auto-load-scripts on|off"
and "show auto-load-scripts". New description for "set auto-load",
"show auto-load", "set auto-load gdb-scripts",
"show auto-load gdb-scripts", "set auto-load python-scripts",
"show auto-load python-scripts", "set auto-load local-gdbinit",
"show auto-load local-gdbinit", "set auto-load libthread-db" and
"show auto-load libthread-db".
* auto-load.c: Remove include python/python-internal.h. Add includes
exceptions.h, cli/cli-script.h, gdbcmd.h, cli/cli-decode.h and
cli/cli-setshow.h.
(GDB_AUTO_FILE_NAME, source_gdb_script_for_objfile)
(auto_load_gdb_scripts, show_auto_load_gdb_scripts): New.
(gdbpy_global_auto_load): Rename to ...
(global_auto_load): ... here.
(auto_load_local_gdbinit, auto_load_local_gdbinit_pathname)
(auto_load_local_gdbinit_loaded, show_auto_load_local_gdbinit)
(script_language_gdb, source_gdb_script_for_objfile): New.
(struct loaded_script): New field language.
(hash_loaded_script_entry, eq_loaded_script_entry): Calculate also
LANGUAGE.
(maybe_add_script): Add parameter language. Drop redundant
entry.full_path initialization. Initialize entry.language and
(*slot)->language.
(auto_load_objfile_script): Change parameter suffix to language.
Remove the call of maybe_add_script.
Call language->source_script_for_objfile.
(load_auto_scripts_for_objfile, struct collect_matching_scripts_data):
New.
(collect_matching_scripts): Adjust it for
struct collect_matching_scripts_data.
(auto_load_info_scripts_pattern_nl): New variable.
(info_auto_load_scripts): Rename to ...
(auto_load_info_scripts): ... here, add parameter language. Adjust it
for struct collect_matching_scripts_data.
(info_auto_load_gdb_scripts, info_auto_load_local_gdbinit)
(set_auto_load_cmd, auto_load_set_cmdlist_get, show_auto_load_cmd)
(auto_load_show_cmdlist_get, info_auto_load_cmd)
(auto_load_info_cmdlist_get): New.
(_initialize_auto_load): Move add_info of "auto-load-scripts" to
python/py-auto-load.c. New installment for "set auto-load gdb-scripts",
"info auto-load gdb-scripts", "set auto-load local-gdbinit" and
"info auto-load local-gdbinit".
* auto-load.h (struct script_language): New.
(gdbpy_global_auto_load): Rename to ...
(global_auto_load): ... here.
(auto_load_local_gdbinit, auto_load_local_gdbinit_pathname)
(auto_load_local_gdbinit_loaded): New declarations.
(maybe_add_script): New parameter language.
(auto_load_objfile_script): Change parameter suffix to language.
(load_auto_scripts_for_objfile, auto_load_info_scripts_pattern_nl)
(auto_load_info_scripts, auto_load_set_cmdlist_get)
(auto_load_show_cmdlist_get, auto_load_info_cmdlist_get): New
declarations.
* linux-thread-db.c: Include auto-load.h and ctype.h.
(auto_load_thread_db, show_auto_load_thread_db): New.
(struct thread_db_info): New field filename.
(delete_thread_db_info): Call xfree for FILENAME.
(try_thread_db_load): Initialize FILENAME.
(try_thread_db_load_from_pdir, try_thread_db_load_from_dir): Return
if !AUTO_LOAD_THREAD_DB.
(info_auto_load_libthread_db_compare, info_auto_load_libthread_db): New.
(_initialize_thread_db): Install auto_load_thread_db
as "set auto-load libthread-db" and install info_auto_load_libthread_db
as "info auto-load libthread-db".
* main.c (captured_main): Rename gdbpy_global_auto_load to
global_auto_load. Initialize AUTO_LOAD_LOCAL_GDBINIT_PATHNAME and
AUTO_LOAD_LOCAL_GDBINIT_LOADED.
(print_gdb_help): Extend the help for 'local init file'.
* python/py-auto-load.c: Remove a comment about gdb scripts extension.
(GDBPY_AUTO_SECTION_NAME): Extend the comment it is Python specific.
(auto_load_scripts): Rename to ...
(auto_load_python_scripts): ... here, update the comment.
(gdbpy_load_auto_script_for_objfile): New declaration.
(show_auto_load_python_scripts, script_language_python)
(gdbpy_load_auto_script_for_objfile): New.
(source_section_scripts): Refactor the code.
(load_auto_scripts_for_objfile): Rename to ...
(gdbpy_load_auto_scripts_for_objfile): ... here, update the
auto_load_objfile_script caller, drop GDBPY_GLOBAL_AUTO_LOAD checking.
(info_auto_load_python_scripts): New.
(gdbpy_initialize_auto_load): New variables cmd and cmd_name.
Rename "set auto-load-scripts" to "set auto-load python-scripts".
Register "set auto-load-scripts" as its deprecated alias. Register
"info auto-load python-scripts". Register "info auto-load-scripts" as
its deprecated alias.
(load_auto_scripts_for_objfile): Rename to ...
(gdbpy_load_auto_scripts_for_objfile): ... here.
* python/python.h (load_auto_scripts_for_objfile): Rename to ...
(gdbpy_load_auto_scripts_for_objfile): ... here.
gdb/doc/
auto-load: Implementation.
* gdb.texinfo (Mode Options): New anchor for -nx.
(Startup): New anchors for Option -init-eval-command,
Home Directory Init File
and Init File in the Current Directory during Startup.
Mention set auto-load local-gdbinit with a reference.
Change the sample code to "set auto-load python-scripts".
(Threads): New anchor set libthread-db-search-path.
Provide references to libthread_db.so.1 file.
(Controlling GDB): New menu item for Auto-loading.
(Auto-loading, Init File in the Current Directory)
(libthread_db.so.1 file, objfile-gdb.gdb file): New nodes.
(Python): Rename the menu item Auto-loading to Python Auto-loading.
(Writing a Pretty-Printer, Objfiles In Python): Update the renamed
reference.
(Auto-loading): Rename to ...
(Python Auto-loading): ... here. Change "set auto-load-scripts" to
"set auto-load python-scripts", new anchor for it. Change
"show auto-load-scripts" to "show auto-load python-scripts", new anchor
for it. Change "info auto-load-scripts"
to "info auto-load python-scripts", new anchor for it. Change "scripts"
to "Python scripts".
gdb/testsuite/
auto-load: Implementation.
* gdb.base/help.exp (test set height): Increase the height.
* gdb.python/py-objfile-script.exp (info auto-load-scripts): Change
to ...
(info auto-load python-scripts): ... here.
* gdb.python/py-section-script.exp (info auto-load-scripts *): Change
to ...
(info auto-load python-scripts *): ... here.