The zero scan is silly when the result isn't used.
* objdump.c (disassemble_bytes): Don't scan for zeros when
disassembling zeros. Translate "resuming at file offset" message.
Formatting. Replace some signed variables with unsigned.
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
This fixes another missing error check.
* readelf.c (get_num_dynamic_syms): Check DT_MIPS_XHASH was
read before dereferencing, and gracefully return. Remove
gnu_hash_error variable. Free gnu hash arrays if number of
syms found is zero.
This fixes some code that assumed only one PT_LOAD would contain
DT_SYMTAB. Which is normally the case, but fuzzers thoroughly mess
with object files.
* readelf.c (get_num_dynamic_syms): Check for nbuckets and nchains
non-zero.
(process_dynamic_section): Call get_num_dynamic_syms once rather
than in segment loop. Break out of segment loop on a successful
load of dynamic symbols. Formatting.
(process_object): Return error status from process_dynamic_section.
When a coredump is generated, there are a few registers in
ARC HS that are put under a special section, namely ".reg-v2".
It is for backward compatibility reasons with older tools that
we have decided not to extend the generic ".reg" section.
This patch makes it possible to display the information better
regarding that section. Compare the output of "readelf" without
and with these changes:
$ readelf -n core # without the patch
...
LINUX 0x0000000c Unknown note type: (0x00000600)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
$ readelf -n core # with the patch
...
LINUX 0x0000000c NT_ARC_V2 (ARC HS accumulator/extra registers)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
In another commit (soon to be submitted), GDB will makes use of these
changes to parse the extra section and its registers.
bfd/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* elf-bfd.h (elfcore_write_arc_v2): Add prototype.
* elf.c (elfcore_grok_arc_v2): New function.
(elfcore_grok_note): Call the new function to handle the corresponding
note.
(elfcore_write_arc_v2): New function.
(elfcore_write_register_note): Call the new function to handle the
corresponding pseudo-sections.
binutils/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* readelf.c (get_note_type): Handle NT_ARC_V2.
include/elf/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* common.h (NT_ARC_V2): New macro definitions.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
The idea here is to get rid of a lot of file related static vars used
to pass data around, in order to not have stale data about one object
file persisting to the next one.
* readelf.c (archive_file_offset, archive_file_size, dynamic_addr),
(dynamic_size, dynamic_nent, dynamic_strings, dynamic_strings_length),
(num_dynamic_syms, nbuckets, nchains, buckets, chains),
(ngnubuckets, gnubuckets, gnuchains, mipsxlat, ngnuchains),
(gnusymidx, dynamic_symbols, dynamic_syminfo, dynamic_syminfo_offset),
(dynamic_syminfo_nent, program_interpreter, dynamic_info),
(dynamic_info_DT_GNU_HASH, dynamic_info_DT_MIPS_XHASH, version_info),
(dynamic_section, symtab_shndx_list, group_count, section_groups),
(section_headers_groups): Move to struct filedata. Update use
throughout file.
Don't use a struct filedata for cmdline, which only needs two of the
filedata fields.
* readelf.c (struct dump_data): New, used..
(cmdline): ..here, and..
(struct filedata): ..here. Adjust all uses.
(request_dump_bynumber, request_dump, parse_args): Pass in a
struct dump_data* rather than Filedata*. Adjust callers.
(main): Don't set cmdline.file_name.
This is another one where not cleaning up sufficiently after
processing one file can lead to errors when processing the next file.
We have ngnuchains non-zero but gnuchains NULL in the following:
off < ngnuchains && (gnuchains[off] & 1) == 0
* readelf.c (process_symbol_table): Clear ngnuchains, ngnubuckets
and nbuckets.
This patch is aimed at fixing a number of oss-fuzz segfaults that
don't reproduce reliably with their current infrastructure, the
problem being that one invocation of readelf is effectively being run
on multiple object files. I believe that these segfaults could be
reliably reproduced with just two fuzzed objects being presented to
readelf, but those inputs are currently not identified by oss-fuzz.
So there is some guesswork involved in this patch. The idea here is
to clear stashed data such as symtab_shndx_list that is processed
using section header info, at the same time that header info is
cleared.
* readelf.c (process_section_headers): Free dynamic symbols etc.
earlier.
This fixes two leaks found in the new code supporting display of
dynamic symbols retrieved via dynamic tags.
* readelf.c (get_num_dynamic_syms): Formatting. Don't return
on error without freeing.
(process_dynamic_section): Don't recreate dynamic symbols from
dynamic tag info when the dynamic symbols have already been
read via section headers.
VDUP (neon) instructions can be conditional, but this is not taken into
account in the current master. This commit fixes that by i) fixing the
VDUP instruction masks and ii) adding logic for disassembling
conditional neon instructions.
opcodes * arm-dis.c (neon_opcodes): Fix VDUP instruction masks.
(print_insn_neon): Support disassembly of conditional
instructions.
binutils* testsuite/binutils-all/arm/vdup-cond.d: New test for testing that
conditional VDUP instructions are disassembled correctly.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-cond.d.
* testsuite/binutils-all/arm/vdup-thumb.d: New test for testing
that VDUP instructions (which are conditional in A32) can be
disassembled in thumb mode.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-thumb.d.
I find this useful when needing to compare compiler output, where the
address of the instruction and the value of symbols results in
unwanted differences.
* objdump.c (no_addresses): New static var.
(usage): Print help for --no-addresses.
(long_options): Add --no-addresses entry.
(objdump_print_addr_with_sym, objdump_print_addr): Omit symbol address.
(disassemble_bytes): Don't print current line address, or reloc
address.
* doc/binutils.texi: Document objdump --no-addresses.
When readelf is processing more than one file, static bss vars won't
start out as zero for the second file unless they are cleared.
* readelf.c (process_symbol_table): Zero gnubuckets, gnuchains
etc. after freeing.
When reconstructing dynamic symbol table from the PT_DYNAMIC segment,
compute dynamic symbol table size from hash table. For DT_HASH, the
number of dynamic symbol table entries equals the number of chains.
For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL
indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all
symbols with STB_LOCAL binding before symbols with other bindings and
all undefined symbols defined ones in dynamic symbol table, the highest
symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol
table index.
Rewrite print_dynamic_symbol to dump dynamic symbol table for --dyn-syms
and --syms --use-dynamic.
binutils/
PR binutils/25707
* readelf.c (nbuckets): New.
(nchains): Likewise.
(buckets): Likewise.
(chains): Likewise.
(ngnubuckets): Likewise.
(gnubuckets): Likewise.
(gnuchains): Likewise.
(mipsxlat): Likewise.
(ngnuchains): Likewise.
(gnusymidx): Likewise.
(VALID_SYMBOL_NAME): Likewise.
(VALID_DYNAMIC_NAME): Use it.
(get_dynamic_data): Moved before process_dynamic_section.
(get_num_dynamic_syms): New function.
(process_dynamic_section): Use DT_SYMTAB, DT_SYMENT, DT_HASH,
DT_GNU_HASH and DT_MIPS_XHASH to reconstruct dynamic symbol
table. Use DT_STRTAB and DT_STRSZ to reconstruct dynamic string
table.
(get_symbol_index_type): Don't print "bad section index" when
there is no section header.
(print_dynamic_symbol): Rewrite.
(process_symbol_table): Call print_dynamic_symbol to dump dynamic
symbol table.
ld/
PR binutils/25707
* testsuite/ld-arm/armthumb-lib.sym: Updated.
* testsuite/ld-arm/farcall-mixed-app.sym: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
* testsuite/ld-arm/fdpic-main-m.sym: Likewise.
* testsuite/ld-arm/fdpic-main.sym: Likewise.
* testsuite/ld-arm/fdpic-shared-m.sym: Likewise.
* testsuite/ld-arm/fdpic-shared.sym: Likewise.
* testsuite/ld-arm/mixed-app.sym: Likewise.
* testsuite/ld-arm/mixed-lib.sym: Likewise.
* testsuite/ld-arm/preempt-app.sym: Likewise.
* testsuite/ld-elf/hash.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elfvsb/hidden2.d: Likewise.
* testsuite/ld-mips-elf/hash2.d: Likewise.
A couple of ld ifunc tests currently FAIL on 64-bit Solaris/x86:
FAIL: ld-ifunc/ifunc-10-x86-64
FAIL: ld-ifunc/ifunc-11-x86-64
FAIL: ld-ifunc/ifunc-12-x86-64
FAIL: ld-ifunc/ifunc-13-x86-64
FAIL: ld-ifunc/ifunc-14a-x86-64
FAIL: ld-ifunc/ifunc-14b-x86-64
FAIL: ld-ifunc/ifunc-14c-x86-64
FAIL: ld-ifunc/ifunc-14d-x86-64
FAIL: ld-ifunc/ifunc-14e-x86-64
FAIL: ld-ifunc/ifunc-14f-x86-64
FAIL: ld-ifunc/ifunc-15-x86-64
FAIL: ld-ifunc/ifunc-17a-x86-64
FAIL: ld-ifunc/ifunc-17b-x86-64
FAIL: ld-ifunc/ifunc-2-local-x86-64-now
FAIL: ld-ifunc/ifunc-2-local-x86-64
FAIL: ld-ifunc/ifunc-2-x86-64-now
FAIL: ld-ifunc/ifunc-2-x86-64
FAIL: ld-ifunc/ifunc-20-x86-64
FAIL: ld-ifunc/pr17154-x86-64-now
FAIL: ld-ifunc/pr17154-x86-64
For one, the actual error is weird:
./ld-new: target elf64-x86-64 not found
failed with: <./ld-new: target elf64-x86-64 not found>, no expected output
FAIL: ld-ifunc/ifunc-10-x86-64
although ld -V does report the elf_x86_64 emulation as supported:
$ ./ld/ld-new -V
GNU ld (GNU Binutils) 2.34.50.20200328
Supported emulations:
elf_x86_64_sol2
elf_x86_64
[...]
When using ld -m elf_x86_64_sol2 instead, one of the testcases links
successfully.
However, there's no point in pursuing this: Solaris does not support
ifunc, as can be seen in <sys/elf.h>:
/*
* GNU/Linux specific symbol type not used by Solaris
*/
#define STT_GNU_IFUNC 10
and never will, given that it has symbol capabilities as solution to
effectively the same problem:
http://www.linker-aliens.org/blogs/rie/entry/symbol_capabilitie/
Therefore this patch disables ifunc testing on Solaris completely by
removing Solaris from binutils/testsuite/lib/binutils-common.exp
(supports_gnu_osabi). The ifunc part is justified above. SHF_GNU_MBIND is
in the OS-specific range and conflicts with
#define SHF_SUNW_REALLOC 0x01000000 /* internal: krtld realloc */
While the comment suggests this might be relocatable without too much
problems, the description of mbind (no formal spec AFAICS, just the
comment in the binutils patch submission) strongly suggests that this
isn't relevant to Solaris at all.
Indirectly, clearing supports_gnu_osabi on Solaris disables
supports_gnu_unique. Again, Solaris <sys/elf.h> has
/*
* GNU/Linux specific binding not used by Solaris
*/
#define STB_GNU_UNIQUE 10
so this seems the right thing to do.
Afterwards, one can remove the explicit mentions of *-*-solaris2* in
quite a number of (but not all) the ld-ifunc dump file notarget lists.
There's one fallout, though: two gas tests now XPASS because they are
xfail'ed for !supports_gnu_osabi:
XPASS: mbind sections 12
XPASS: mbind section contents 16
XPASS: mbind sections 16
XPASS: mbind section contents 16
To fix that, I've changed
#xfail: ![supports_gnu_osabi]
to notarget.
Tested on x86_64-pc-solaris2.11, i386-pc-solaris2.11,
x86_64-pc-linux-gnu, and i686-pc-linux-gnu.
ld:
* testsuite/ld-ifunc/ifunc-10-i386.d: Remove *-*-solaris2* from
notarget.
* ifunc-11-i386.d: Likewise.
* ifunc-12-i386.d: Likewise.
* ifunc-13-i386.d: Likewise.
* ifunc-14a-i386.d: Likewise.
* ifunc-14b-i386.d: Likewise.
* ifunc-14c-i386.d: Likewise.
* ifunc-14d-i386.d: Likewise.
* ifunc-14e-i386.d: Likewise.
* ifunc-14f-i386.d: Likewise.
* ifunc-15-i386.d: Likewise.
* ifunc-16-i386-now.d: Likewise.
* ifunc-16-i386.d: Likewise.
* ifunc-17a-i386.d: Likewise.
* ifunc-17b-i386.d: Likewise.
* ifunc-18a-i386.d: Likewise.
* ifunc-18b-i386.d: Likewise.
* ifunc-19a-i386.d: Likewise.
* ifunc-19b-i386.d: Likewise.
* ifunc-2-i386-now.d: Likewise.
* ifunc-2-i386.d: Likewise.
* ifunc-2-local-i386-now.d: Likewise.
* ifunc-2-local-i386.d: Likewise.
* ifunc-20-i386.d: Likewise.
* ifunc-21-i386.d: Likewise.
* ifunc-22-i386.d: Likewise.
* ifunc-5a-i386.d: Likewise.
* ifunc-5a-local-i386.d: Likewise.
* ifunc-5b-i386.d: Likewise.
* ifunc-5b-local-i386.d: Likewise.
* ifunc-5r-local-i386.d: Likewise.
* ifunc-6a-i386.d: Likewise.
* ifunc-6b-i386.d: Likewise.
* ifunc-7a-i386.d: Likewise.
* ifunc-7b-i386.d: Likewise.
* ifunc-8-i386.d: Likewise.
* ifunc-9-i386.d: Likewise.
* pr17154-i386-now.d: Likewise.
* pr17154-i386.d: Likewise.
* ifunc-23a-x86.d: Remove notarget.
* ifunc-24a-x86.d: Likewise.
* ifunc-25a-x86.d: Likewise.
gas:
* testsuite/gas/elf/section12a.d: Use notarget instead of xfail.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
binutils:
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Don't
enable on *-*-solaris*.
PR binutils/pr25662
bfd * libcoff-in.h (struct pe_tdata): Rename the insert_timestamp
field to timestamp and make it an integer.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Test the timestamp
field in the pe_data structure rather than the insert_timestamp
field.
binutils* objcopy.c (copy_object): When copying PE format files set the
timestamp field in the pe_data structure if the preserve_dates
flag is set.
* testsuite/binutils-all/objcopy.exp (objcopy_test) Use
--preserve-dates in place of the -p option, in order to make its
effect more obvious.
ld * emultempl/pe.em (after_open): Replace initialisation of the
insert_timestamp field in the pe_data structure with an
initialisation of the timestamp field.
* emultemp/pep.em: Likewise.
* pe-dll.c (fill_edata): Use the timestamp field in the pe_data
structure instead of the insert_timestamp field.
Last patch didn't manage to xfail spu due to clear_xfail *-*-*elf*.
Clearing *-*-*elf* dates back to a time when we had rather a lot more
setup_xfail patterns, so limiting it to hppa*-*-*elf*. Also,
mips-*-irix ought to have been mips-*-irix* and I'm having second
thoughts about xfailing mips and hiding what looks like a problem: If
the mips target is supposed to emit names for local section symbols
and does so for objcopy, why isn't it doing the same for ld? Also,
lots more mips targets would be subject to this test failing. So I'm
backing out those xfails and leaving it to someone more knowledgeable
about mips.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Only
clear_xfail hppa*-*-*elf*. Revert mips xfails.
xfails spu due to a note section getting a different vma, and some
mips targets that give section symbols a name string. I added -p
for the executable test in an attempt to fix all the pe target fails,
but that doesn't preserve the date/time for some reason.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails
from here to calls. Remove "m8*-*-*" entry. Don't xfail tic54x
but do xfail spu, mipstx39 and mips-sgi-irix for the executable
test. Pass "-p" to objcopy for the executable test.
binutils/ChangeLog:
2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR binutils/25662
* testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to
specify whether an object file or executable should be built and tested.
Change test names to report whether an object file or executable is
being tested.
* testsuite/binutils-all/pr25662.ld: New test.
* testsuite/binutils-all/pr25662.s: New test.
This patch fixes a leak of qualified_name caused by 4c83662712 and a
double free introduced by fd486f32d1. Not breaking out of the loop
results in an error: "failed to seek to next archive header". That's
slightly better than silently preventing the possibility of endless
loops.
* readelf.c (process_archive): Don't double free qualified_name.
Don't break out of loop with "negative" archive_file_size, just
set file offset to max.
With a crafted "negative" ar_hdr.ar_size it is possible to make
readelf loop. This patch catches the overflow in a file offset
calculation.
* readelf.c (process_archive): Prevent endless loop.
Extend _bfd_elf_get_symbol_version_string for nm -D to display symbol
version. _bfd_elf_get_symbol_version_name is added to avoid updating
all XXX_get_symbol_version_string functions.
bfd/
PR binutils/25708
* elf-bfd.h (_bfd_elf_get_symbol_version_name): New.
* elf.c (_bfd_elf_get_symbol_version_name): New function. Based
on the previous _bfd_elf_get_symbol_version_string.
(_bfd_elf_get_symbol_version_string): Use it.
binutils/
PR binutils/25708
* nm.c (SYM_NAME): Removed.
(print_symname): Add a pointer to struct extended_symbol_info
argument. Call _bfd_elf_get_symbol_version_name to get symbol
version.
(print_symdef_entry): Pass NULL to print_symname.
(print_symbol_info_bsd): Update call to print_symname.
(print_symbol_info_sysv): Likewise.
(print_symbol_info_posix): Likewise.
ld/
PR binutils/25708
* testsuite/ld-elf/pr25708.d: New file.
PR 25676
bfd * dwarf2.c (struct varinfo): Add unit_offset field to record the
location of the varinfo in the unit's debug info data. Change the
type of the stack field to a boolean.
(lookup_var_by_offset): New function. Returns the varinfo
structure for the variable described at the given offset in the
unit's debug info.
(scan_unit_for_symbols): Add support for variables which have the
DW_AT_specification attribute.
binutils* testsuite/binutils-all/dw4.s: New test source file.
* testsuite/binutils-all/nm.exp: Run the new test.
process_symbol_table () has
unsigned long num_syms;
...
for (si = 0, psym = symtab; si < num_syms; si++, psym++)
We should use unsigned long to iterate over num_syms.
* readelf.c (process_symbol_table): Use unsigned long for si.
Better than warning about bfd types, just don't include bfd.h and
warn against including the header again.
* elfcomm.c: Don't include bfd.h or bucomm.h.
(program_name): Declare.
(process_archive_index_and_symbols): Replace bfd_boolean with int,
and substitute FALSE and TRUE.
(setup_archive, setup_nested_archive): Likewise.
* elfcomm.h: Likewise.
This extracts code reading symbol tables into a common function that
tidies up after errors. I've also changed an error reporting multiple
string tables to an error on multiple symbol tables.
* readelf.c (get_symbols): New function.
(process_relocs, ia64_process_unwind, hppa_process_unwind),
(arm_process_unwind, get_symbol_for_build_attribute): Use it.
* unwind-ia64.c (unw_decode_uleb128): Prevent overlarge shifts.
Detect shift overflows and check that terminating byte is found.
Print an error on a bad uleb128.
In git commit fd486f32d1 I put some static variables used by
get_symbol_for_build_attribute in a file scope ba_cache struct. This
was to prevent leaks in get_symbol_for_build_attribute, and to tidy up
before readelf exited. The patch wasn't quite right though. When
readelf processes more than one file it was possible to double free
arrays allocated in get_symbol_for_build_attribute.
* readelf.c (process_file): Clean ba_cache.
