bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests. Tidy
implib test formatting. Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.
Version 1a adds a pr_pid member containing the process ID of the
terminating process. The presence of pr_pid is inferred from the
note's size.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_psinfo): Check for minimum note size
and handle pr_pid if present.
Issue an error if p_paddr becomes invalid when allocating space for
program headers.
PR ld/20376
* elf.c (assign_file_positions_for_load_sections): Also check
p_paddr for program header space.
The procstat AUXV core dump note in FreeBSD consists of 32-bit integer
followed by an array of auxiliary vector entries.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_note): Handle NT_FREEBSD_PROCSTAT_AUXV
notes.
Move parsing of FreeBSD-specific ELF core notes out of elfcore_grok_note
into a new elfcore_grok_freebsd_note function. Add core note grok routines
for FreeBSD's psinfo and prstatus notes while here rather than depending
on the native handling in elfcore_grok_note.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Remove handling of NT_X86_XSTATE for
FreeBSD. Remove case for NT_FREEBSD_THRMISC.
(elfcore_grok_freebsd_psinfo): New function.
(elfcore_grok_freebsd_prstatus): New function.
(elfcore_grok_freebsd_note): New function.
(elf_parse_notes): Use "elfcore_grok_freebsd_note" for "FreeBSD"
notes.
I noticed when writing _bfd_elf_strtab_save/restore that size_t would
be better than bfd_size_type for a number of things in elf-strtab.c.
Using a 64-bit bfd_size_type on a 32-bit host doesn't make much sense
for array sizes and indices.
* elf-strtab.c (struct strtab_save): Use size_t for "size".
(struct elf_strtab_hash): Likewise for "size" and "alloced".
(_bfd_elf_strtab_init): Formatting.
(_bfd_elf_strtab_add): Return size_t rather than bfd_size_type.
(_bfd_elf_strtab_addref): Take size_t idx param.
(_bfd_elf_strtab_delref, _bfd_elf_strtab_refcount): Likewise.
(_bfd_elf_strtab_offset): Likewise.
(_bfd_elf_strtab_clear_all_refs): Use size_t idx.
(_bfd_elf_strtab_save): Use size_t "idx" and "size" vars.
(_bfd_elf_strtab_restore, _bfd_elf_strtab_emit): Similarly.
(_bfd_elf_strtab_finalize): Similarly.
* elf-bfd.h (_bfd_elf_strtab_add): Update prototypes.
(_bfd_elf_strtab_addref, _bfd_elf_strtab_delref): Likewise.
(_bfd_elf_strtab_refcount, _bfd_elf_strtab_offset): Likewise.
* elf.c (bfd_elf_get_elf_syms): Calculate symbol buffer size
using bfd_size_type.
(bfd_section_from_shdr): Delete amt.
(_bfd_elf_init_reloc_shdr): Likewise.
(_bfd_elf_link_assign_sym_version): Likewise.
(assign_section_numbers): Use size_t reloc_count.
* elflink.c (struct elf_symbuf_head): Use size_t "count".
(bfd_elf_link_record_dynamic_symbol): Use size_t for some vars.
(elf_link_is_defined_archive_symbol): Likewise.
(elf_add_dt_needed_tag): Likewise.
(elf_finalize_dynstr): Likewise.
(elf_link_add_object_symbols): Likewise.
(bfd_elf_size_dynamic_sections): Likewise.
(elf_create_symbuf): Similarly.
(bfd_elf_match_symbols_in_sections): Likewise.
(elf_link_swap_symbols_out): Likewise.
(elf_link_check_versioned_symbol): Likewise.
(bfd_elf_gc_record_vtinherit): Likewise.
(bfd_elf_gc_common_finalize_got_offsets): Likewise.
PR binutils/20063
* elf.c (bfd_elf_get_elf_syms): Check for out of range sh_link
field before accessing sections array.
* readelf.c (get_32bit_section_headers): Warn if an out of range
sh_link or sh_info field is encountered.
(get_64bit_section_headers): Likewise.
PR 19938
bfd * elf-bfd.h (struct elf_backend_data): Rename
elf_backend_set_special_section_info_and_link to
elf_backend_copy_special_section_fields.
* elfxx-target.h: Likewise.
* elf.c (section_match): Ignore the SHF_INFO_LINK flag when
comparing section flags.
(copy_special_section_fields): New function.
(_bfd_elf_copy_private_bfd_data): Copy the EI_ABIVERSION field.
Perform two scans over special sections. The first one looks for
a direct mapping between the output section and an input section.
The second scan looks for a possible match based upon section
characteristics.
* elf32-arm.c (elf32_arm_copy_special_section_fields): New
function. Handle setting the sh_link field of SHT_ARM_EXIDX
sections.
* elf32-i386.c (elf32_i386_set_special_info_link): Rename to
elf32_i386_copy_solaris_special_section_fields.
* elf32-sparc.c (elf32_sparc_set_special_section_info_link):
Rename to elf32_sparc_copy_solaris_special_section_fields.
* elf64-x86-64.c (elf64_x86_64_set_special_info_link): Rename to
elf64_x86_64_copy_solaris_special_section_fields.
binutils* readelf.c (get_solaris_segment_type): New function.
(get_segment_type): Call it.
On Linux/x86, GCC 4.2 issues a warning:
bfd/elf.c: In function ‘_bfd_elf_copy_private_bfd_data’:
bfd/elf.c:1334: warning: declaration of ‘link’ shadows a global declaration
/usr/include/unistd.h:757: warning: shadowed declaration is here
make[6]: *** [elf.lo] Error 1
Replace "link" with "sh_link" fixes it.
* elf.c (_bfd_elf_copy_private_bfd_data): Replace "link" with
"sh_link".
PR target/19938
bfd * elf-bbfd.h (struct elf_backend_data): New field:
elf_strtab_flags.
New field: elf_backend_set_special_section_info_and_link
* elfxx-target.h (elf_backend_strtab_flags): Define if not already
defined.
(elf_backend_set_special_section_info_and_link): Define if not
already defined.
(elfNN_bed): Use elf_backend_set_special_section_info_and_link and
elf_backend_strtab_flags macros to initialise fields in structure.
* elf.c (_bfd_elf_make_section_from_shdr): Check for SHF_STRINGS
being set even if SHF_MERGE is not set.
(elf_fake_sections): Likewise.
(section_match): New function. Matches two ELF sections based
upon fixed characteristics.
(find_link): New function. Locates a section in a BFD that
matches a section in a different BFD.
(_bfd_elf_copy_private_bfd_data): Copy the sh_info and sh_link
fields of reserved sections.
(bfd_elf_compute_section_file_positions): Set the flags for the
.shstrtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
(swap_out_syms): Likewise for the .strtab section.
* elflink.c (bfd_elf_final_link): Set the flags for the
.strtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
* elf32-i386.c (elf32_i386_set_special_info_link): New function.
(elf_backend_strtab_flags): Set to SHF_STRINGS for Solaris
targets.
(elf_backend_set_special_section_info_and_link): Define for
Solaris targets.
* elf32-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.
binutils* testsuite/binutils-all/i386/compressed-1b.d: Allow for the
string sections possibly having the SHF_STRINGS flag bit set.
* testsuite/binutils-all/i386/compressed-1c.d: Likewise.
* testsuite/binutils-all/readelf.s: Likewise.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/x86-64/compressed-1b.d: Likewise.
* testsuite/binutils-all/x86-64/compressed-1c.d: Likewise.
gas * testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string
sections possibly having the SHF_STRINGS flag bit set.
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
The HAS_RELOC bit should be cleared when relocations are removed from
relocatable files.
bfd/
PR binutils/19547
* elf.c (assign_section_numbers): Clear HAS_RELOC if there are
no relocations in relocatable files.
binutils/
PR binutils/19547
* testsuite/binutils-all/objcopy.exp
(objcopy_test_without_global_symbol): New proc.
Run objcopy_test_without_global_symbol.
* testsuite/binutils-all/pr19547.c: New file.
Since it will sometime have more than just prpsinfo. Also,
elf32-ppc.c needlessly includes this header.
* elf-linux-core.h: Rename from elf-linux-psinfo.h.
* elf.c: Adjust #include.
* elf32-ppc.c: Don't #include elf-linux-psinfo.h
* Makefile.am (SOURCE_HFILES): Update.
* Makefile.in: Regenerate.
* po/SRC-PORFILES.in: Regenerate.
No functional changes here.
* elf.c (_bfd_elf_map_sections_to_segments): Don't set
PT_GNU_RELRO p_flags.
(assign_file_positions_for_non_load_sections): Set PT_GNU_RELRO
flags to PF_R here.
binutils PR binutils/15835
* readelf.c (struct elf_section_list): New structure.
(symtab_shndx_hdr): Replace with symtab_shndx_list.
(get_32bit_elf_symbols): Scan for a symbol index table matching
the symbol table in use.
(get_64bit_elf_symbols): Likewise.
(process_section_headers): Handle multiple symbol index sections.
bfd * elf-bfd.h (struct elf_section_list): New structure.
(struct elf_obj_tdata): Replace symtab_shndx_hdr with
symtab_shndx_list. Delete symtab_shndx_section.
(elf_symtab_shndx): Replace macro with elf_symtab_shndx_list.
* elf.c (bfd_elf_get_syms): If symtab index sections are present,
scan them for the section that matches the provided symbol table.
(bfd_section_from_shdr): Record all SHT_SYMTAB_SHNDX sections.
(assign_section_numbers): Use the first symtab index table in the
list.
(_bfd_elf_compute_section_file_positions): Replace use of
symtab_shndx_hdr with use of symtab_shndx_list.
(find_section_in_list): New function.
(assign_file_postions_except_relocs): Use new function.
(_bfd_elf_copy_private_symbol_data): Likewise.
(swap_out_syms): Handle multiple symbol table index sections.
* elf32-m32c.c (m32c_elf_relax_section): Replace use of
symtab_shndx_hdr with use of symtab_shndx_list.
* elf32-rl78.c (rl78_elf_relax_section): Likewise.
* elf32-rx.c (rx_relax_section): Likewise.
* elf32-v850.c (v850_elf_relax_delete_bytes): Likewise.
* elflink.c (bfd_elf_final_link): Likewise.
These int vars are really unsigned, so make them so.
* section.c (struct bfd_section): Make "id" and "index" unsigned.
* coff-rs6000.c (_bfd_xcoff_sizeof_headers): Adjust local var to suit.
* elf.c (elf_map_symbols): Likewise.
* elf64-ppc.c (sym_exists_at): Make "id" param unsigned.
(struct ppc_link_hash_table): Make "top_id" and "top_index" unsigned.
(ppc64_elf_setup_section_lists): Ditto for local vars.
* elf32-arm.c: Similarly to elf64-ppc.c.
* elf32-avr.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-metag.c: Likewise.
* elf32-nios2.c: Likewise.
* elfnn-aarch64.c: Likewise.
* simple.c (struct saved_offsets): Make "section_count" unsigned.
* bfd-in2.h: Regenerate.
Belt and braces fix. Either of the changes here is sufficient to
ensure vd_nodename is initialized properly.
* elf.c (_bfd_elf_slurp_version_tables): Always init vd_nodename.
Don't copy fields not set by _bfd_elf_swap_verdef_in.
When copying the sh_link and sh_info fields in stripped section headers,
we also check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output. Since --only-keep-debug
turns all non-debug sections into SHT_NOBITS sections, the output
SHT_NOBITS type matches any input type.
bfd/
PR binutils/18785
* elf.c (_bfd_elf_copy_private_bfd_data): When copying the
sh_link and sh_info fields in stripped section headers, we also
check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output. Since
--only-keep-debug turns all non-debug sections into SHT_NOBITS
sections, the output SHT_NOBITS type matches any input type.
binutils/testsuite/
PR binutils/18785
* binutils-all/objcopy.exp: Run strip-12.
* binutils-all/strip-12.d: New file.
* binutils-all/strip-12.s: Likewise.
bfd * elf.c (_bfd_elf_copy_private_bfd_data): Copy the sh_link and
sh_info fields of sections whose type has been changed to
SHT_NOBITS.
bin * doc/binutils.texi: Document that the --only-keep-debug option
to strip and objcopy preserves the section headers of stripped
sections.
tests * binutils-all/objcopy.exp (keep_debug_symbols_and_check_links):
New proc. Checks that debug-info-only binaries retain the
sh_link field in stripped sections.
Commit 23283c1b changed the layout of some bss style sections on
powerpc64, but neglected to add a page gap before the third PT_LOAD
segment created by this reording. Without a page gap we get two
PT_LOAD headers that overlap by one page in memory. That shouldn't be
allowed because the dynamic loader will load garbage from the first
page of the last segment over the last page of the previous segment.
bfd/
* elf.c (_bfd_elf_map_sections_to_segments): Do not make a new
segment for loaded sections after nonloaded sections if the
sections are on the same page.
ld/testsuite/
* ld-powerpc/elfv2so.d: Update
* elf.c (_bfd_elf_assign_file_positions_for_non_load): Use .rela
prefix for reloc section corresponding to rela section associated
with renamed debug section.
_bfd_elf_assign_file_positions_for_non_load will set the sh_size
field for .shstrtab section. There is need to initialize it in
_bfd_elf_compute_section_file_positions.
* elf.c (_bfd_elf_compute_section_file_positions): Don't
initialize sh_size for .shstrtab here.
This patch uses ELF strtab with GC and suffix merging support to create
ELF .strtab section. There is some small memory overhead to use ELF
strtab:
==14928== HEAP SUMMARY:
==14928== in use at exit: 3,276,318 bytes in 679 blocks
==14928== total heap usage: 1,544 allocs, 865 frees, 15,259,146 bytes allocated
vs.
==14936== HEAP SUMMARY:
==14936== in use at exit: 3,276,318 bytes in 679 blocks
==14936== total heap usage: 1,532 allocs, 853 frees, 15,026,402 bytes allocated
when running:
./ld-new -m elf_x86_64 -o tmpdir/ld-partial.o -r ldgram.o ldlex-wrapper.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o plugin.o ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o ldfile.o ldcref.o eelf_x86_64.o eelf32_x86_64.o eelf_i386.o eelf_iamcu.o ei386linux.o eelf_l1om.o eelf_k1om.o ldbuildid.o
The results are
[32] .strtab STRTAB 0+ 3beff8 00407a 00 0 0 1
vs
[32] .strtab STRTAB 0+ 3beff8 0041d8 00 0 0 1
It reduces the .strtab size by 350 bytes, about 2%
Saving on libc.so from glibc is much more since libc.so has many alias
symbols with the same suffix. For x32 glibc,
[82] .strtab STRTAB 0+ 81b348 0159e7 00 0 0 1
vs
[82] .strtab STRTAB 0+ 81b8bc 019e72 00 0 0 1
It reduces the .strtab size by 17547 bytes, about 16%.
bfd/
PR gas/18451
* elf-bfd.h (elf_sym_strtab): New.
(elf_link_hash_table): Add strtabcount, strtabsize and
strtab.
(_bfd_elf_stringtab_init): Removed.
* elf.c (_bfd_elf_stringtab_init): Removed.
(_bfd_elf_compute_section_file_positions): Replace
bfd_strtab_hash/_bfd_elf_stringtab_init/_bfd_stringtab_free/
_bfd_stringtab_size with
elf_strtab_hash/_bfd_elf_strtab_init/_bfd_elf_strtab_free/
_bfd_elf_strtab_size. Use _bfd_elf_strtab_add,
_bfd_elf_strtab_finalize and _bfd_elf_strtab_offset to get
st_name.
(swap_out_syms): Likewise.
* elflink.c (elf_final_link_info): Replace bfd_strtab_hash
with elf_strtab_hash. Remove symbuf, symbuf_count,
symbuf_size and shndxbuf_size.
(elf_link_flush_output_syms): Removed.
(elf_link_output_sym): Renamed to ...
(elf_link_output_symstrtab): This. Replace _bfd_stringtab_add
with _bfd_elf_strtab_add. Don't flush symbols to the file nor
swap out symbols.
(elf_link_swap_symbols_out): New.
(elf_link_output_extsym): Replace elf_link_output_sym with
elf_link_output_symstrtab.
(elf_link_input_bfd): Likewise.
(elf_final_link_free): Replace _bfd_stringtab_free with
_bfd_elf_strtab_free. Remove symbuf.
(bfd_elf_final_link): Replace _bfd_elf_stringtab_init with
_bfd_elf_strtab_init. Don't set symbuf, symbuf_count,
symbuf_size nor shndxbuf_size. Initialize strtabsize and
strtab. Initialize symshndxbuf to -1 when number of sections
>= 64K. Replace elf_link_output_sym/elf_link_output_sym with
elf_link_output_symstrtab/elf_link_output_symstrtab. Don't
call elf_link_flush_output_syms. Call _bfd_elf_strtab_finalize
and elf_link_swap_symbols_out. Replace _bfd_stringtab_size
and _bfd_stringtab_emit with _bfd_elf_strtab_size and
_bfd_elf_strtab_emit.
gas/testsuite/
PR gas/18451
* gas/elf/elf.exp: Run strtab.
* gas/elf/strtab.d: New file.
* gas/elf/strtab.s: Likewise.
ld/testsuite/
PR gas/18451
* ld-elf/strtab.d: New file.
* ld-elf/strtab.s: Likewise.
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id,
populated when an ELF or PE BFD is read.
gdb is updated to use that, and to use the build-id to find symbols for PE files
also.
There is currently no generic way to extract the build-id from an object file,
perhaps an option to objdump to do this might make sense?
On x86_64-pc-cygwin, gdb's sepdebug.exp changes:
-# of unsupported tests 1
+# of expected passes 90
I don't seem to get consistent testsuite runs on i686-linux-gnu, but there
don't appear to be any regressions.
bfd/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* elf-bfd.h : Remove struct elf_build_id.
* bfd.c : Add struct bfd_build_id.
* bfd-in2.h: Regenerate.
* elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id.
* libpei.h: Add protoype and macros for
bfd_XXi_slurp_codeview_record.
* peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public
* peicode.h (pe_bfd_read_buildid): Add.
(pe_bfd_object_p): Use pe_bfd_read_buildid().
gdb/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* build-id.c: Don't include elf-bfd.h.
(build_id_bfd_get): Use bfd_build_id.
(build_id_verify): Ditto.
* build-id.h: Ditto.
(find_separate_debug_file_by_buildid): Ditto.
* python/py-objfile.c: Don't include elf-bfd.h.
(objfpy_get_build_id) Use bfd_build_id.
(objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
* coffread.c: Include build-id.h.
(coff_symfile_read): Try find_separate_debug_file_by_buildid.
gdb/doc/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.texinfo (Separate Debug Files): Document that PE is also
supported.
gdb/testsuite/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.base/sepdebug.exp: Add EXEEXT where needed.
* lib/gdb.exp (get_build_id): Teach how to extract build-id from a
PE file.
* lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
In a SHF_COMPRESSED compressed section, the raw compressed data should
begin immediately after the compression header. This patch removes the
extra zlib header from the SHF_COMPRESSED section.
bfd/
* bfd.c (bfd_update_compression_header): Also write the zlib
header if the SHF_COMPRESSED bit cleared..
(bfd_check_compression_header): Return the uncompressed size.
* compress.c (decompress_contents): Don't skip the zlib header.
(bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB,
which doesn't have the zlib header.
(bfd_init_section_decompress_status): Likewise.
(bfd_get_full_section_contents): Updated.
(bfd_is_section_compressed): Likewise.
(bfd_is_section_compressed_with_header): Return the uncompressed
size.
* elf.c (_bfd_elf_make_section_from_shdr): Updated.
* bfd-in2.h: Regenerated.
binutils/
* readelf.c (uncompress_section_contents): Add a parameter for
uncompressed size. Don't check the zlib header.
(load_specific_debug_section): Updated.
binutils/testsuite/
* binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info"
with "$OBJDUMP -W".
* binutils-all/libdw2-compressedgabi.out: Updated.
gas/
2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header, which
is handled by bfd_update_compression_header.
When we set up st_name for output section name in elf_fake_sections, we
don't know if the compressed DWARF debug section will be smaller. We may
end up with compressed DWARF debug sections which are bigger than the
uncompressed ones. This patch delays setting up st_name for output DWARF
debug section to _bfd_elf_assign_file_positions_for_non_load which will
compress the output debug section. We also postpone placement of shstrtab
section after DWARF debug sections have been compressed. The net effect
is .shstrtab section is now placed after .symtab and .strtab sections.
bfd/
PR ld/18277
* compress.c (bfd_compress_section_contents): Remove the
write_compress argument.
(bfd_init_section_compress_status): Updated.
(bfd_compress_section): Likewise.
* elf.c (_bfd_elf_set_reloc_sh_name): New.
(_bfd_elf_init_reloc_shdr): Add delay_st_name_p. Set sh_name
to (unsigned int) -1 if delay_st_name_p is TRUE. Use
_bfd_elf_set_reloc_sh_name.
(elf_fake_sections): Don't rename DWARF debug section for
linker output if it will be compressed. Instead, set
delay_st_name_p to TRUE and pass it to _bfd_elf_init_reloc_shdr.
(assign_section_numbers): Call _bfd_elf_strtab_addref only if
sh_name != (unsigned int) -1. Don't finalize nor assign
shstrtab section here. Delay setting output section names to
_bfd_elf_write_object_contents.
(_bfd_elf_compute_section_file_positions): Update comments on
sh_offset for shstrtab section.
(assign_file_positions_for_non_load_sections): Set sh_offset to
-1 for shstrtab section.
(assign_file_positions_except_relocs): Likewise.
(_bfd_elf_assign_file_positions_for_non_load): Set up sh_name
when compressing DWARF debug sections. Place shstrtab section
after DWARF debug sections have been compressed.
(_bfd_elf_write_object_contents): Setting sh_name for output
sections.
ld/testsuite/
PR ld/18277
* ld-elf/compressed1d.d: New.
* ld-elf/compressed1e.d: Likewise.
Change compressed input debug section name for objdump is very confusing.
But we need to change it for linker so that linker will consider the
input section as a debug section. This patch delays section rename to
elf_fake_sections for objcopy and avoids it for objdump.
bfd/
PR binutils/18209
* bfd.c (bfd): Add is_linker_input.
* elf.c (convert_debug_to_zdebug): New.
(convert_zdebug_to_debug): Likewise.
(_bfd_elf_make_section_from_shdr): Don't convert .debug_* to
.zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME.
(_bfd_elf_init_reloc_shdr): Pass a pointer to section name
instead of a pointer to section.
(elf_fake_sections): Rename the section name if SEC_ELF_RENAME
is set.
* section.c (SEC_ELF_RENAME): New.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/18209
* objcopy.c (setup_section): Copy compress status.
binutils/testsuite/
PR binutils/18209
* binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W
on zlib-gabi output.
* binutils-all/dw2-1.W: Convert section names to .zdebug_*.
* binutils-all/dw2-3.W: Likewise.
* binutils-all/objdump.W: Likewise.
* binutils-all/dw2-3gabi.W: New file.
ld/
PR binutils/18209
* ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
commit 9ad5cbcfb2 added the initial support
for more than 64k ELF sections with holes for reserved section indices in
section header table and set entries of reserved section indices in
section header table to index 0:
for (secn = 1; secn < section_number; ++secn)
- i_shdrp[secn]->sh_name = _bfd_elf_strtab_offset (elf_shstrtab (abfd),
- i_shdrp[secn]->sh_name);
-
+ if (i_shdrp[secn] == NULL)
+ i_shdrp[secn] = i_shdrp[0];
+ else
+ i_shdrp[secn]->sh_name = _bfd_elf_strtab_offset (elf_shstrtab (abfd),
+ i_shdrp[secn]->sh_name);
commit 4fbb74a605 removed holes in section
header table. Check for i_shdrp[secn] == NULL is no longer needed now.
This patch removes it.
* elf.c (assign_section_numbers): Always set up sh_name.
Iterate ELF sections by pointer without section counter. It removes
"i++".
* elf.c (assign_file_positions_for_non_load_sections): Iterate
sections by pointer.
(_bfd_elf_assign_file_positions_for_non_load): Likewise.
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
to ld for ELF targets to support generating compressed DWARF debug
sections. We always generate .zdebug_* section since section names have
been finalized and they can't be changed easily when compression is
being performed.
bfd/
* bfd-in.h (compressed_debug_section_type): New.
* compress.c (bfd_compress_section_contents): Add an argument
for linker write compression and always generate .zdebug_*
section when linking.
(bfd_init_section_compress_status): Pass FALSE to
bfd_compress_section_contents.
(bfd_compress_section): New function.
* elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS
on DWARF debug sections if COMPRESS_DEBUG is set and rename
section if COMPRESS_DEBUG_GABI_ZLIB isn't set.
(assign_file_positions_for_non_load_sections): Set sh_offset
to -1 if SEC_ELF_COMPRESS is set.
(assign_file_positions_except_relocs): Likwise.
(_bfd_elf_assign_file_positions_for_relocs): Renamed to ...
(_bfd_elf_assign_file_positions_for_non_load): This. Change
return time to bfd_boolean. Compress the section if
SEC_ELF_COMPRESS is set.
(_bfd_elf_write_object_contents): Updated.
(_bfd_elf_set_section_contents): Write section contents to
the buffer if SEC_ELF_COMPRESS is set.
* merge.c: Include "elf-bfd.h".
(sec_merge_emit): Add arguments for contents and offset. Write
to contents with offset if contents isn't NULL.
(_bfd_write_merged_section): Write section contents to the
buffer if SEC_ELF_COMPRESS is set. Pass contents and
output_offset to sec_merge_emit.
* elflink.c (bfd_elf_final_link): Allocate the buffer for
output section contents if SEC_ELF_COMPRESS is set.
* section.c (SEC_ELF_COMPRESS): New.
* bfd-in2.h: Regenerated.
gas/
* as.h (compressed_debug_section_type): Removed.
include/
* bfdlink.h (bfd_link_info): Add compress_debug.
ld/
* ld.texinfo: Document --compress-debug-sections=.
* ldmain.c (main): Set BFD_COMPRESS on output_bfd if
COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd
for COMPRESS_DEBUG_GABI_ZLIB.
* lexsup.c (elf_static_list_options): Add
--compress-debug-sections=.
* emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New.
(xtra_long): Add "compress-debug-sections".
(gld${EMULATION_NAME}_handle_option): Handle
OPTION_COMPRESS_DEBUG.
ld/testsuite/
* ld-elf/compress.exp (build_tests): Add tests for
--compress-debug-sections=.
(run_tests): Likewise.
Add additonal tests for --compress-debug-sections=.
* ld-elf/gabiend.rt: New file.
* ld-elf/gabinormal.rt: Likewise.
* ld-elf/gnubegin.rS: Likewise.
* ld-elf/gnunormal.rS: Likewise.
* ld-elf/zlibbegin.rS: Likewise.
* ld-elf/zlibnormal.rS: Likewise.
Recognize NT_X86_XSTATE notes in FreeBSD process cores. Recent
FreeBSD versions include a note containing the XSAVE state for each
thread in the process when XSAVE is in use. The note stores a copy of
the current XSAVE mask in a reserved section of the machine-defined
XSAVE state at the same offset as Linux's NT_X86_XSTATE note.
For native processes, use the PT_GETXSTATE_INFO ptrace request to
determine if XSAVE is enabled, and if so the active XSAVE state mask
(that is, the value of %xcr0 for the target process) as well as the
size of XSAVE state area. Use the PT_GETXSTATE and PT_SETXSTATE requests
to fetch and store the XSAVE state, respectively, in the BSD x86
native targets.
In addition, the FreeBSD amd64 and i386 native targets now include
"read_description" target methods to determine the correct x86 target
description for the current XSAVE mask. On FreeBSD amd64 this also
properly returns an i386 target description for 32-bit binaries which
allows the 64-bit GDB to run 32-bit binaries.
Note that the ptrace changes are in the BSD native targets, not the
FreeBSD-specific native targets since that is where the other ptrace
register accesses occur. Of the other BSDs, NetBSD and DragonFly use
XSAVE in the kernel but do not currently export the extended state via
ptrace(2). OpenBSD does not currently support XSAVE.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Recognize NT_X86_XSTATE on
FreeBSD.
(elfcore_write_xstatereg): Use correct note name on FreeBSD.
gdb/ChangeLog:
* amd64-tdep.c (amd64_target_description): New function.
* amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
* amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
(amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* amd64bsd-nat.h: Export amd64bsd_xsave_len.
* amd64fbsd-nat.c (amd64fbsd_read_description): New function.
(_initialize_amd64fbsd_nat): Set "to_read_description" to
"amd64fbsd_read_description".
* amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
(amd64fbsd_supply_xstateregset): New function.
(amd64fbsd_collect_xstateregset): New function.
Add "amd64fbsd_xstateregset".
(amd64fbsd_iterate_over_regset_sections): New function.
(amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386-tdep.c (i386_target_description): New function.
* i386-tdep.h: Export i386_target_description and tdesc_i386.
* i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
(i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* i386bsd-nat.h: Export i386bsd_xsave_len.
* i386fbsd-nat.c (i386fbsd_read_description): New function.
(_initialize_i386fbsd_nat): Set "to_read_description" to
"i386fbsd_read_description".
* i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
(i386fbsd_core_read_description): New function.
(i386fbsd_supply_xstateregset): New function.
(i386fbsd_collect_xstateregset): New function.
Add "i386fbsd_xstateregset".
(i386fbsd_iterate_over_regset_sections): New function.
(i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386fbsd-tdep.h: New file.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
Fixes tic6x testsuite failures due to .rela.plt having a zero sh_info.
I considered passing link_info to get_reloc_section so we could
directly return the .got.plt output section, but we need the fallback
to name lookup anyway for objcopy.
bfd/
* elf.c (_bfd_elf_get_reloc_section): Allow for .got.plt being
mapped to output .got section.
ld/testsuite/
* ld-arm/tls-gdesc-nlazy.g: Adjust for readelf note.
* ld-tic6x/shlib-1.rd: Expect corrected .rela.plt sh_info.
* ld-tic6x/shlib-1b.rd: Likewise.
* ld-tic6x/shlib-1r.rd: Likewise.
* ld-tic6x/shlib-1rb.rd: Likewise.
* ld-tic6x/shlib-app-1.rd: Likewise.
* ld-tic6x/shlib-app-1b.rd: Likewise.
* ld-tic6x/shlib-app-1r.rd: Likewise.
* ld-tic6x/shlib-app-1rb.rd: Likewise.
* ld-tic6x/shlib-noindex.rd: Likewise.
For objcopy and relocatable link, we should also preserve the
SHF_COMPRESSED bit if not decompress.
* elf.c (_bfd_elf_init_private_section_data): Also preserve the
SHF_COMPRESSED bit if not decompress.
Since .rela.plt/rel.plt section may contain relocations against .got.plt
section, we set sh_info for .rela.plt/rel.plt section to .got.plt section
index if target has .got.plt section.
bfd/
PR ld/18169
* elf-bfd.h (elf_backend_data): Add get_reloc_section.
(_bfd_elf_get_reloc_section): New.
* elf.c (_bfd_elf_get_reloc_section): Likewise.
(assign_section_numbers): Call get_reloc_section to look up the
section the relocs apply.
* elfxx-target.h (elf_backend_get_reloc_section): Likewise.
(elfNN_bed): Initialize get_reloc_section with
elf_backend_get_reloc_section.
ld/testsuite/
PR ld/18169
* ld-elf/linkinfo1a.d: Updated.
* ld-elf/linkinfo1b.d: Likewise.