The parameter "first" of linux_nat_post_attach_wait is unused, remove
it.
gdb/ChangeLog:
* linux-nat.c (linux_nat_post_attach_wait): Remove FIRST
parameter.
(linux_nat_attach): Adjust call to linux_nat_post_attach_wait.
gdb_timer objects are new'ed in create_timer, but xfree'd in
poll_timers. Use delete instead.
gdb/ChangeLog:
* event-loop.c (poll_timers): Unallocate timer using delete
instead of xfree.
Breakpoints are currently in a limbo state between C and C++. There is
a pseudo class hierarchy implemented using struct fields. Taking
watchpoint as an example:
struct watchpoint
{
/* The base class. */
struct breakpoint base;
...
}
and it is instantianted with "new watchpoint ()". When destroyed, a
destructor is first invoked through the breakpoint_ops, and then the
memory is freed by calling delete through a pointer to breakpoint.
Address sanitizer complains about this, for example, because we new and
delete the same memory using different types.
This patch takes the logical step of making breakpoint subclasses extend
the breakpoint class for real, and converts their destructors to actual
C++ destructors.
Regtested on the buildbot.
gdb/ChangeLog:
* breakpoint.h (struct breakpoint_ops) <dtor>: Remove.
(struct breakpoint) <~breakpoint>: New.
(struct watchpoint): Inherit from breakpoint.
<~watchpoint>: New.
<base>: Remove.
(struct tracepoint): Inherit from breakpoint.
<base>: Remove.
* breakpoint.c (longjmp_breakpoint_ops): Remove.
(struct longjmp_breakpoint): Inherit from breakpoint.
<~longjmp_breakpoint>: New.
<base>: Remove.
(new_breakpoint_from_type): Remove casts.
(watchpoint_in_thread_scope): Remove reference to base field.
(watchpoint_del_at_next_stop): Likewise.
(update_watchpoint): Likewise.
(watchpoint_check): Likewise.
(bpstat_check_watchpoint): Likewise.
(set_longjmp_breakpoint): Likewise.
(struct fork_catchpoint): Inherit from breakpoint.
<base>: Remove.
(struct solib_catchpoint): Inherit from breakpoint.
<~solib_catchpoint>: New.
<base>: Remove.
(dtor_catch_solib): Change to ...
(solib_catchpoint::~solib_catchpoint): ... this.
(breakpoint_hit_catch_solib): Remove reference to base field.
(add_solib_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(struct exec_catchpoint): Inherit from breakpoint.
<~exec_catchpoint>: New.
<base>: Remove.
(dtor_catch_exec): Change to ...
(exec_catchpoint::~exec_catchpoint): ... this.
(dtor_watchpoint): Change to ...
(watchpoint::~watchpoint): ... this.
(watch_command_1): Remove reference to base field.
(catch_exec_command_1): Likewise.
(base_breakpoint_dtor): Change to ...
(breakpoint::~breakpoint): ... this.
(base_breakpoint_ops): Remove dtor field value.
(longjmp_bkpt_dtor): Change to ...
(longjmp_breakpoint::~longjmp_breakpoint): ... this.
(strace_marker_create_breakpoints_sal): Remove reference to base
field.
(delete_breakpoint): Don't manually call breakpoint destructor.
(create_tracepoint_from_upload): Remove reference to base field.
(trace_pass_set_count): Likewise.
(initialize_breakpoint_ops): Don't initialize
momentary_breakpoint_ops, don't set dtors.
* ada-lang.c (struct ada_catchpoint): Inherit from breakpoint.
<~ada_catchpoint>: New.
<base>: Remove.
(create_excep_cond_exprs): Remove reference to base field.
(dtor_exception): Change to ...
(ada_catchpoint::~ada_catchpoint): ... this.
(dtor_catch_exception): Remove.
(dtor_catch_exception_unhandled): Remove.
(dtor_catch_assert): Remove.
(create_ada_exception_catchpoint): Remove reference to base
field.
(initialize_ada_catchpoint_ops): Don't set dtors.
* break-catch-sig.c (struct signal_catchpoint): Inherit from
breakpoint.
<~signal_catchpoint>: New.
<base>: Remove.
(signal_catchpoint_dtor): Change to ...
(signal_catchpoint::~signal_catchpoint): ... this.
(create_signal_catchpoint): Remove reference to base field.
(initialize_signal_catchpoint_ops): Don't set dtor.
* break-catch-syscall.c (struct syscall_catchpoint): Inherit
from breakpoint.
<~syscall_catchpoint>: New.
<base>: Remove.
(dtor_catch_syscall): Change to ...
(syscall_catchpoint::~syscall_catchpoint): ... this.
(create_syscall_event_catchpoint): Remove reference to base
field.
(initialize_syscall_catchpoint_ops): Don't set dtor.
* break-catch-throw.c (struct exception_catchpoint): Inherit
from breakpoint.
<~exception_catchpoint>: New.
<base>: Remove.
(dtor_exception_catchpoint): Change to ...
(exception_catchpoint::~exception_catchpoint): ... this.
(handle_gnu_v3_exceptions): Remove reference to base field.
(initialize_throw_catchpoint_ops): Don't set dtor.
* ctf.c (ctf_get_traceframe_address): Remove reference to base
field.
* remote.c (remote_get_tracepoint_status): Likewise.
* tracefile-tfile.c (tfile_get_traceframe_address): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (actions_command): Likewise.
(validate_actionline): Likewise.
(tfind_1): Likewise.
(get_traceframe_location): Likewise.
(find_matching_tracepoint_location): Likewise.
(parse_tracepoint_status): Likewise.
* mi/mi-cmd-break.c (mi_cmd_break_passcount): Likewise.
The longjmp kind of breakpoint has a destructor, but doesn't have an
associated structure. The next patch converts breakpoint destructors from
breakpoint_ops::dtor to actual destructors, but to do that it is needed
for longjmp_breakpoint to have a structure that will contain such
destructor. This patch adds it.
According to initialize_breakpoint_ops, a longjmp breakpoint derives
from "momentary breakpoints", so eventually a momentary_breakpoint
struct/class should probably be created. It's not necessary for the
destructor though, so a structure type for this abstract kind of
breakpoint can be added when we fully convert breakpoint ops into
methods of the breakpoint type hierarchy.
It is now necessary to instantiate different kinds of breakpoint objects
in set_raw_breakpoint_without_location based on bptype (sometimes a
breakpoint, sometimes a longjmp_breakpoint), so it now uses
new_breakpoint_from_type to do that. I also changed set_raw_breakpoint
to use it, even though I don't think that it can ever receive a bptype
that actually requires it. However, I think it's good if all breakpoint
object instantion is done in a single place.
gdb/ChangeLog:
* breakpoint.c (struct longjmp_breakpoint): New struct.
(is_tracepoint_type): Change return type to bool.
(is_longjmp_type): New function.
(new_breakpoint_from_type): Handle longjmp kinds of breakpoints.
(set_raw_breakpoint_without_location): Use
new_breakpoint_from_type.
(set_raw_breakpoint): Likewise.
This is a small preparatory patch to factor out a snippet that appears
twice. More kinds of breakpoints will need to be created based on
bptype, so I think it's a good idea to centralize the instantiation of
breakpoint objects.
gdb/ChangeLog:
* breakpoint.c (new_breakpoint_from_type): New function.
(create_breakpoint_sal): Use new_breakpoint_from_type and
unique_ptr.
(create_breakpoint): Likewise.
Rename "mem" related commands, so that their naming is consistent with
the <command-name>_command pattern of naming functions that implement
commands.
gdb/ChangeLog:
* memattr.c (mem_info_command): Rename to ...
(info_mem_command): ... this.
(mem_enable_command): Rename to ...
(enable_mem_command): ... this.
(mem_disable_command): Rename to ...
(disable_mem_command): ... this.
(mem_delete_command): Rename to ...
(delete_mem_command): ... this.
(_initialize_mem): Adjust function names.
Newer versions of libipt support instruction flow decoder events instead of
indicating those events with flags in struct pt_insn. Add support for them in
GDB.
gdb/
* btrace.c (handle_pt_insn_events): New.
(ftrace_add_pt): Call handle_pt_insn_events. Rename ERRCODE into
STATUS. Split into this and ...
(handle_pt_insn_event_flags): ... this.
Version 2 of libipt adds an event system to instruction flow decoders and
deprecates indicating events via flags in struct pt_insn. Add configuration
checks to determine which version we have.
gdb/
* configure.ac: Check for pt_insn_event, struct pt_insn.enabled,
and struct pt_insn.resynced.
* configure: Regenerated.
* config.in: Regenerated.
This used to hold a pair of pointers to the previous and next function segment
that belong to this function call. Replace with a pair of indices into the
vector of function segments.
This used to hold a pair of pointers to the previous and next function segment
in execution flow order. It is no longer necessary as the previous and next
function segments now are simply the previous and next elements in the vector
of function segments.
These are no longer needed and might hold invalid addresses once we change the
vector of function segment pointers into a vector of function segment objects
where a reallocation of the vector changes the address of its elements.
Directly insert new btrace_function pointers into the vector and have the
vector own these pointers. This allows us to later retrieve these objects by
their number directly after creation whereas at the moment we have to wait
until the vector is fully populated.
This requires to pull btrace_thread_info through different functions but
cleans up the code for freeing the trace.
Change the GDB 8.0 section of the NEWS file to try to follow this order:
* Functional changes
* Added and removed configurations and targets
* New commands
* New options
* MI changes
In particular, there were two "New commands" sections.
gdb/ChangeLog:
* NEWS (Changes in GDB 8.0): Remove extra empty line. Move
"Removed targets and native configurations" up. Merge duplicate
"New commands" sub-sections. Add "New options" sub-sections.
This test requires calling a function in the inferior, and therefore it
doesn't make sense to run it if the target doesn't support calling
functions from GDB.
gdb/testsuite/ChangeLog:
* gdb.base/watch-cond-infcall.exp: Don't run if target doesn't
support function calls from GDB.
Use these to replace instances of MAX_REGISTER_SIZE.
* defs.h (copy_integer_to_size): New declaration.
* findvar.c (copy_integer_to_size): New function.
(do_cint_test): New selftest function.
(copy_integer_to_size_test): Likewise.
(_initialize_findvar): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_supply_reg): Use raw_supply_integer.
(mips_fbsd_collect_reg): Use raw_collect_integer.
* mips-linux-tdep.c (supply_32bit_reg): Use raw_supply_integer.
(mips64_fill_gregset): Use raw_collect_integer
(mips64_fill_fpregset): Use raw_supply_integer.
* regcache.c (regcache::raw_supply_integer): New function.
(regcache::raw_collect_integer): Likewise.
* regcache.h: (regcache::raw_supply_integer): New declaration.
(regcache::raw_collect_integer): Likewise.
This patch adds one unit test for gdbarch methods register_to_value and
value_to_register. The test pass different combinations of {regnu, type}
to gdbarch_register_to_value and gdbarch_value_to_register. In order
to do the test, add a new function create_new_frame to create a fake
frame. It can be improved after we converted frame_info to class.
In order to isolate regcache (from target_ops operations on writing
registers, like target_store_registers), the sub-class of regcache in the
test override raw_write. Also, in order to get the right regcache from
get_thread_arch_aspace_regcache, the sub-class of regcache inserts itself
to current_regcache.
Suppose I incorrectly modified the size of buffer as below,
@@ -1228,7 +1228,7 @@ ia64_register_to_value (struct frame_info *frame, int regnum,
int *optimizedp, int *unavailablep)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- gdb_byte in[MAX_REGISTER_SIZE];
+ gdb_byte in[1];
/* Convert to TYPE. */
if (!get_frame_register_bytes (frame, regnum, 0,
build GDB with "-fsanitize=address" and run unittest.exp, asan can detect
such error
==2302==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff98193870 at pc 0xbd55ea bp 0x7fff981935a0 sp 0x7fff98193598
WRITE of size 16 at 0x7fff98193870 thread T0
#0 0xbd55e9 in frame_register_unwind(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1119
#1 0xbd58c8 in frame_register(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1147
#2 0xbd6e25 in get_frame_register_bytes(frame_info*, int, unsigned long, int, unsigned char*, int*, int*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1427
#3 0x70080a in ia64_register_to_value /home/yao/SourceCode/gnu/gdb/git/gdb/ia64-tdep.c:1236
#4 0xbf570e in gdbarch_register_to_value(gdbarch*, frame_info*, int, type*, unsigned char*, int*, int*) /home/yao/SourceCode/gnu/gdb/git/gdb/gdbarch.c:2619
#5 0xc05975 in register_to_value_test /home/yao/SourceCode/gnu/gdb/git/gdb/gdbarch-selftests.c:131
Or, even if GDB is not built with asan, GDB just crashes.
*** stack smashing detected ***: ./gdb terminated
Aborted (core dumped)
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add gdbarch-selftests.c.
(COMMON_OBS): Add gdbarch-selftests.o.
* frame.c [GDB_SELF_TESTS] (create_new_frame): New function.
* frame.h [GDB_SELF_TESTS] (create_new_frame): Declare.
* gdbarch-selftests.c: New file.
* regcache.h (regcache) <~regcache>: Mark it virtual if
GDB_SELF_TEST.
<raw_write>: Likewise.
This patches moves global variable current_regcache to a class regcache
static variable (protected) so that the unit test I add in the following
patch can access it (by means of extending class regcache in unit test).
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* regcache.c (current_regcache): Change it to
regcache::current_regcache.
(regcache_observer_target_changed): Update.
(regcache_thread_ptid_changed): Make it a regcache static
method.
(regcache_thread_ptid_changed): Update.
(class regcache_access): New.
(current_regcache_test): Update.
(_initialize_regcache): Update.
* regcache.h: Include forward_list.
(regcache): Declare regcache_thread_ptid_changed and declare
registers_changed_ptid as friend.
We should use register_size to get register contents instead of
TYPE_LENGTH.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* i387-tdep.c (i387_register_to_value): Use register_size
instead of TYPE_LENGTH.
* m68k-tdep.c (m68k_register_to_value): Likewise.
This patch restricts alpha_convert_register_p from
"TYPE_LENGTH (type) != 8" to "TYPE_LENGTH (type) == 4", because,
- we have check "TYPE_LENGTH (valtype) == 4" in alpha_register_to_value
and alpha_value_to_register,
- alpha lds and sts instruction access 4 bytes,
- comments "It might need to convert the [float] register into the
corresponding [integer] type (see Alpha)" and integer is 4-byte on
alpha,
I think it is the right restrict condition to "TYPE_LENGTH (valtype) == 4".
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* alpha-tdep.c (alpha_convert_register_p): Return true if type
length is 4.
(alpha_register_to_value): Remove type length check.
(alpha_value_to_register): Likewise.
We need to convert register if the type is float. Suppose we get a value
from float point register, but its type is integer, we don't have to convert.
This case may not exist in real code, but exist in my unit test case.
warning: Cannot convert floating-point register value to non-floating-point type.
Self test failed: arch m68k: self-test failed at gdb/git/gdb/findvar.c:1072
ok = gdbarch_register_to_value (gdbarch, frame, regnum, type,
buf.data (), &optim, &unavail);
1072: SELF_CHECK (ok);
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* m68k-tdep.c (m68k_convert_register_p): Check type's code is
TYPE_CODE_FLT or not.
GDB has some global variables, like sentinel_frame,
current_thread_arch, and etc, we need to reset them after each unit
tests.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* selftest-arch.c (tests_with_arch): Call registers_changed
and reinit_frame_cache.
* selftest.c (run_self_tests): Likewise.
Nowadays, rs6000 disassembler is selected in different ways in
opcodes and gdb,
opcodes:
case bfd_arch_rs6000:
if (mach == bfd_mach_ppc_620)
disassemble = print_insn_big_powerpc;
else
disassemble = print_insn_rs6000;
break;
gdb:
if (arch == bfd_arch_rs6000)
set_gdbarch_print_insn (gdbarch, print_insn_rs6000);
else
set_gdbarch_print_insn (gdbarch, gdb_print_insn_powerpc);
I am not sure which one is the right one. However, such selection
should be done in one place instead of two.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rs6000-tdep.c (gdb_print_insn_powerpc): Remove.
(rs6000_gdbarch_init): Don't call set_gdbarch_print_insn.
This patch changes rl78 to let disassble.c:disassembler select
disassembler. rl78_get_disassembler doesn't handle the case
that abfd is NULL, so this patch also fix it.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-tdep.c (rl78_gdbarch_init): Don't call
set_gdbarch_print_insn.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c (rl78_get_disassembler): If parameter abfd
is NULL, set cpu to E_FLAG_RL78_ANY_CPU.
opcodes/disassble.c:disassembler select h8300 disassembler like this,
if (mach == bfd_mach_h8300h || mach == bfd_mach_h8300hn)
disassemble = print_insn_h8300h;
else if (mach == bfd_mach_h8300s
|| mach == bfd_mach_h8300sn
|| mach == bfd_mach_h8300sx
|| mach == bfd_mach_h8300sxn)
disassemble = print_insn_h8300s;
else
disassemble = print_insn_h8300;
which is the same as what gdb/h8300-tdpe.c does,
switch (info.bfd_arch_info->mach)
{
case bfd_mach_h8300:
...
set_gdbarch_print_insn (gdbarch, print_insn_h8300);
case bfd_mach_h8300h:
case bfd_mach_h8300hn:
...
set_gdbarch_print_insn (gdbarch, print_insn_h8300h);
case bfd_mach_h8300s:
case bfd_mach_h8300sn:
...
set_gdbarch_print_insn (gdbarch, print_insn_h8300s);
so we can leave disassble.c:disassembler doing the selection.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* h8300-tdep.c (h8300_gdbarch_init): Don't call
set_gdbarch_print_insn.
Compare against the "raw" PC register number instead of the cooked
register number when determining if a register was handled by
PT_GETREGS. Previously the register fetch/store operations only tried
PT_GETREGS to fetch any individual register. The result was that
fetching or storing an individual register not covered by PT_GETREGS
(such as floating point registers) did not work.
While here, remove an early exit to simplify the code flow from the
PT_GETREGS / PT_SETREGS case, and add a getfpregs_supplies similar to
getregs_supplies to describe the registers supplied by PT_GETFPREGS
and PT_SETFPREGS.
gdb/ChangeLog:
* mips-fbsd-nat.c (getregs_supplies): Fix upper bound comparison.
(getpfpregs_supplies): New function.
(mips_fbsd_fetch_inferior_registers): Remove early exit and use
getfpregs_supplies.
(mips_fbsd_store_inferior_registers): Likewise.
Add mention of the vMustReplyEmpty to the remote serial protocol
documentation. It is important that this packet be treated in the same
fashion as any other unknown 'v' packet, and I have tried to reflect
this in the description of the packet, it is not simply the case that we
_must_ return the empty string for this packet.
As the intention is that we should treat this packet as unknown then an
argument could be made that we should not document it, however, for
someone implementing a gdbserver from scratch, seeing an undocumented
packet arrive from gdb is confusing, and will probably cause them to
have to read the code in order to check how this packet should be
handled, which is not ideal.
gdb/doc/ChangeLog:
* gdb.texinfo (Packets): Document vMustReplyEmpty packet.
It's a bit difficult to create an unsized array type in Rust, but if
you do, right now ptype will show something like "[u8; ]". It really
should print "[u8]", though, which is what this patch implements.
This is part of PR 21466.
Built and regtested on x86-64 Fedora 25. I'm checking this in.
ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* rust-lang.c (rust_print_type) <TYPE_CODE_ARRAY>: Print unsized
arrays as "[T]", not "[T; ]".
testsuite/ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* gdb.rust/unsized.exp: New file.
* gdb.rust/unsized.rs: New file.
PR rust/21484 notes that watch -location does not work with Rust:
(gdb) watch -location a
syntax error in expression, near `) 0x00007fffffffe0f4'.
update_watchpoint tries to tell gdb that the new expression it creates
has C syntax:
/* The above expression is in C. */
b->language = language_c;
However, update_watchpoint doesn't actually use this language when
re-parsing the expression.
Originally I was going to fix this by saving and restoring the
language in update_watchpoint, but this regressed
gdb.dlang/watch-loc.exp, because the constructed expression actually
has D syntax (specifically the name is not parseable by C).
Next I looked at directly constructing an expression, and not relying
on the parser at all; but it seemed to me that upon a re-set, we'd
want to reparse the type, and there is no existing API to do this
correctly.
So, in the end I made a hook to let each language choose what
expression to use. I made all the languages other than Rust use the C
expression, because that is the status quo ante. However, this is
probably not truly correct. After this patch, at least, it is easy to
correct by someone who knows the language(s) in question.
Regtested by the buildbot.
ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* rust-lang.c (exp_descriptor_rust): New function.
(rust_language_defn): Use it.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn)
<la_watch_location_expression>: New member.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* c-lang.h (c_watch_location_expression): Declare.
* c-lang.c (c_watch_location_expression): New function.
(c_language_defn, cplus_language_defn, asm_language_defn)
(minimal_language_defn): Use it.
* breakpoint.c (watch_command_1): Call
la_watch_location_expression.
* ada-lang.c (ada_language_defn): Update.
testsuite/ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* gdb.rust/watch.exp: New file.
* gdb.rust/watch.rs: New file.
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10
with the native libcurses like this:
In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:
0,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:2
6,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c
:31:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c: In function `CORE_A
DDR tui_disassemble(gdbarch*, tui_asm_line*, CORE_ADDR, int)':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:71:19: error: `class
string_file' has no member named `wclear'; did you mean `clear'?
gdb_dis_out.clear ();
^
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:78:19: error: `class
string_file' has no member named `wclear'; did you mean `clear'?
gdb_dis_out.clear ();
^
make[2]: *** [Makefile:1927: tui-disasm.o] Error 1
It turned out this happens because <curses.h> has
#define clear() wclear(stdscr)
This can be avoided by defining NOMACROS, which the patch below does.
ncurses potentially has a similar problem, which can be avoided by defining
NCURSES_NOMACROS.
PR tui/21482
* gdb_curses.h (NOMACROS): Define.
(NCURSES_NOMACROS): Define.
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10
with the native libcurses in gdb/tui for several instances of the same problem:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c: In function `void tui_erase_source_content(tui_win_info*, int)':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:257:18: error: invalid conversion from `const char*' to `char*' [-fpermissive]
no_src_str);
^
In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:0,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:26,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:33:
/vol/gcc-7/lib/gcc/sparc-sun-solaris2.10/7.1.0/include-fixed/curses.h:699:12: note: initializing argument 4 of `int mvwaddstr(WINDOW*, int, int, char*)'
extern int mvwaddstr(WINDOW *, int, int, char *);
^~~~~~~~~
make[2]: *** [Makefile:1927: tui-winsource.o] Error 1
Unlike ncurses, <curses.h> declares
extern int mvwaddstr(WINDOW *, int, int, char *);
i.e. the last arg is char *, not const char *.
The patch fixes this by casting the last arg to mvwaddstr to char *,
as was recently done on mainline in a newterm() call (the only
difference between 8.0 and mainline gdb/tui).
* tui/tui-windata.c (tui_erase_data_content): Cast last mvwaddstr
arg to char *.
* tui/tui-wingeneral.c (box_win): Likewise.
* tui/tui-winsource.c (tui_erase_source_content): Likewise.
(tui_show_source_line): Likewise.
(tui_show_exec_info_content): Likewise.
gdb has a special type (TYPE_CODE_ARRAY) to support the gcc extension
(https://gcc.gnu.org/onlinedocs/gcc/Vector-Extensions.html).
TYPE_CODE_ARRAY is handled incorrectly for both (32- and 64-bit) modes
on Sparc machines.
Tested on sparc64-linux-gnu and sparc-solaris (32- and 64-bit mode).
6 tests ( from gdb/testsuite/gdb.base/gnu_vector.exp) failed on
sparc64-Linux and on sparc-Solaris in 32- and 64-bit mode. Now all
these tests passed. gdb/testsuite/gdb.base/gnu_vector.exp has 117
different cases for small (and not small) arrays and structures.
No regressions.
gdb/ChangeLog:
2017-05-19 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* sparc-tdep.c (sparc_structure_return_p)
(sparc_arg_on_registers_p): New functions.
(sparc32_store_arguments): Use them.
* sparc64-tdep.c (sparc64_16_byte_align_p)
(sparc64_store_floating_fields, sparc64_extract_floating_fields):
Handle TYPE_CODE_ARRAY.
With Rust 1.18 and 1.19, I saw some test suite failures. They were
all of the same form -- Box seems to be qualified in the output now,
like:
print box_some
$64 = core::option::Option<alloc::boxed::Box<u8>>::Some(0x7ffff6c21018 "\001\000")
... where the test was expecting Option<Box<u8>>.
This patch fixes the problem in a way that should work with earlier
versions of Rust.
gdb/testsuite/ChangeLog
2017-05-18 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow Box to be qualified.