* serial.c (serial_interface_lookup): Take a const char pointer.
(serial_fdopen): Rename to ...
(serial_fdopen_ops): ... this. Add an OPS parameter and use it.
Call the OPS' fdopen function if there is one.
(serial_fdopen): Rewrite as wrapper to serial_fdopen_ops.
(serial_pipe): New.
(struct serial_ops) <fdopen>: New field.
* ser-mingw.c (free_pipe_state):
(free_pipe_state): Close output on non-pex pipes.
(pipe_windows_fdopen): New.
(gdb_pipe): New.
(_initialize_ser_windows): Register pipe_windows_fdopen.
* ser-go32.c (gdb_pipe): New.
* ser-pipe.c (pipe_close): Close file descriptor even if there's
no state pointer.
(pipe_ops): Delete.
(gdb_pipe): New.
via gdb_stderr.
* serial.c (serial_open): Set error_fd to -1.
* serial.h (struct serial): New field error_fd.
(struct serial_opts): New field avail.
* ser-pipe.c (pipe_open): Create another pair
of sockets. Pass stderr to gdb.
* ser-mingw.c (pipe_windows_open): Pass
PEX_STDERR_TO_PIPE to pex_run. Initialize
sd->error_fd.
(pipe_avail): New.
(_initialize_ser_windows): Hook pipe_avail.
* ser-base.c (generic_readchar): Check if there's
anything in stderr channel and route that to gdb_stderr.
(struct ser_console_state, struct net_windows_state): Add exit_select,
have_stopped, thread.
(pipe_select_thread, console_select_thread)
(net_windows_select_thread): Don't create a local state copy or
close stop_select. Exit on exit_select instead of stop_select. Set
have_stopped.
(console_select_thread): Don't report control keypresses as pending
input.
(pipe_select_thread): Allow stop_select to interrupt sleeping.
(set_console_wait_handle): Create exit_select and have_stopped.
Save the thread handle. Check _kbhit before starting a thread.
(ser_console_done_wait_handle): New.
(ser_console_close): Close new handles. Wait for the thread to
exit.
(new_windows_select_thread): Assert that an event occurred.
(net_windows_wait_handle): Check for pending input before starting
a thread.
(net_windows_done_wait_handle): New.
(net_windows_open): Create exit_select and have_stopped.
Save the thread handle.
(net_windows_close): Close new handles. Wait for the thread to
exit.
(_intiialize_ser_windows): Register done_wait_handle methods.
* serial.c [USE_WIN32API] (serial_done_wait_handle): New.
* serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle.
[USE_WIN32API] (serial_done_wait_handle): New prototype.
* mingw-hdep.c (gdb_select): Use serial_done_wait_handle.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
-lws2_32.
* ser-tcp.c (<winsock2.h>): Include, for Windows.
(ETIMEDOUT): Define, for Windows.
(ioctl): Likewise.
(closesocket): Define, for POSIX.
(net_open): Adjust for differences in socket functions between
Windows and UNIX.
(net_close): Likweise.
(net_read_prim): New function.
(net_write_prim): Likewise.
(_initialize_ser_tcp): Initialize winsock. Fill in read_prim and
write_prim.
* ser-unix.h (ser_unix_readcchar): Remove.
(ser_unix_read_prim): Declare.
(ser_unix_write_prim): Likewise.
* ser-unix.c (generic_readchar): Move to ser-base.c.
(ser_unix_wait_for): Likewise.
(do_unix_readchar): Likewise.
(ser_unix_readchar): Likewise.
(_initialize_ser_hardwire): Initialize read_prim and write_prim.
(ser_unix_read_prim): New function.
(ser_unix_write_prim): Likewise.
* ser-base.h (generic_readchar): Declare.
(ser_base_readchar): Likewise.
* ser-base.c (<winsock2.h>): Include, for windows.
(fd_event): Use the read primitive specified by the serial
interface.
(ser_base_wait_for): Moved from ser-unix.c
(do_ser_base_read_char): Likewise.
(generic_readchar): Likewise.
(ser_base_readchar): Likewise.
(ser_base_write): Use the write primitive specified by the serial
interface.
* ser-pipe.c (_initialize_ser_pipe): Use ser_base_readchar, not
ser_unix_readchar. Initialize read_prim and write_prim.
* serial.c (struct serial_ops): Add read_prim and write_prim.
* configure: Regenerate.
* utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
SERIAL_FLUSH_OUTPUT.
* serial.h (struct serial_ops): Add drain_output, pointer to
function that waits for output to drain.
(SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
* ser-unix.c (hardwire_drain_output): New function and prototype.
* ser-unix.c (hardwire_ops): Add entry for drain_output function.
* ser-tcp.c (tcp_ops): Ditto.
* ser-ocd.c (ocd_ops): Ditto.
* ser-mac.c (mac_ops): Ditto.
* ser-go32.c (dos_ops): Ditto.
* ser-e7kpc.c (e7000pc_ops): Ditto.
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
for `watchdog' variable. This allows the user to put an upper
limit on the amount of time that GDB will wait for the target to
return from a step or continue operation. This will primarily be
used for the testsuite, where it is difficult to come up with a
reasonable timeout for things like function calls, which can take
as long as three minutes under some circumstances. If the
watchdog timer expires, GDB will generate an error that looks like
`Watchdog has expired.', and will detach from the target.
* remote-mips.c (mips_open): Setup initial frame from target.
Print it out so that user is told where the program is stopped
when they attach.
* remote-nrom.c: Loads of cleanups. Use serial code to open
network connections. Use expect() to wait for response to
download command.
* ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
* serial.c serial.h (serial_open serial_fdopen serial_close):
Allow users to open the same device multiple times. They all get
to share the same serial_t. This is about the only way to have
multiple active targets use the same device (for download and
debug).
* sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
* target.c: Add `targetdebug' variable. If this is non-zero,
then a special target is put at the top of the target stack which
will cause all calls through the target vector to have their args
and results printed out.
If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
to achieve the desired timeout.
* serial.h (serial_t): Add field timeout_remaining.
* inflow.c, ser-unix.c, ser-go32.c, ser-tcp.c, serial.h,
terminal.h: Move all the process group stuff back to inflow.c;
that's a better place for it and fixes problems with trying to get/set
the process group of a tty we're doing remote debugging on.
* terminal.h: Skip the redefine crap if HAVE_TERMIOS.
Tom Tromey