This patch allows AArch64 LD defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
ld/
* configure.tgt: Set "targ_emul" to "aarch64linux32b" for
aarch64_be-*-linux-gnu_ilp32. Set "targ_emul" to "aarch64linux32" for
aarch64-*-linux-gnu_ilp32.
Verify that debug section is removed by garbage collection when there
is a .note.gnu.property section.
* testsuite/ld-i386/i386.exp: Run property-x86-4a and
property-x86-4b.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-4a.d: New file.
* testsuite/ld-i386/property-x86-4a.s: Likewise.
* testsuite/ld-i386/property-x86-4b.d: Likewise.
* testsuite/ld-i386/property-x86-4b.s: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.s: Likewise.
* testsuite/ld-x86-64/property-x86-4b.d: Likewise.
* testsuite/ld-x86-64/property-x86-4b.s: Likewise.
PR ld/21472
ld * emulparams/avrxmega3.sh (RODATA_PM_OFFSET): Set to 0x8000.
* scripttempl/avr.sc
(__RODATA_PM_OFFSET__) [RODATA_PM_OFFSET]: Use RODATA_PM_OFFSET
as default if not already defined.
(.data) [!RODATA_PM_OFFSET]: Don't include .rodata and friends.
(.rodata) [RODATA_PM_OFFSET]: Put at an offset of
__RODATA_PM_OFFSET__.
gas * config/tc-avr.c (mcu_types): Add entries for: attiny416,
attiny417, attiny816, attiny817.
PR ld/21251
* ldfile.c (ldfile_add_library_path): If the path starts with
$SYSROOT then use the sysroot as the real prefix.
* ldlang.c (lang_add_input_file): Treat $SYSROOT in the same
way as =.
* ldlex.l: Add $SYSROOT as allow prefix for a filename.
* ld.texinfo (-L): Document that $SYSROOT acts like = when
prefixing a library search path.
(INPUT): Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Add $SYSROOT prefix
tests.
-gdwarf-sections doesn't work on targets that lack support to emit
address size relative relocs. The testcase as it was avoided
-gdwarf-sections doing anything by providing a non-empty .debug_line.
It's better to not use -gdwarf-sections. Also, the testcase failed
to match the output for 16-bit address targets like avr.
PR ld/20882
* testsuite/ld-gc/pr20882.d: Don't pass -gdwarf-sections to gas.
Allow for 16-bit address targets and match expected data fully.
* testsuite/ld-gc/pr20882a.s: Delete .debug_line section.
* testsuite/ld-gc/pr20882b.s: Likewise.
* testsuite/ld-gc/pr20882c.s: Likewise.
If a debug section is referenced by a kept debug section, it should
also be kept.
Some targets, like mips, keep input files when there are some special
sections, like .gnu.attributes, even if input file is unused otherwise.
In this case, all debug sections are kept. The new test will fail on
such targets. We can either fix those targets or XFAIL the test.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): New function.
(_bfd_elf_gc_mark_extra_sections): Mark any debug sections
referenced by kept debug sections.
ld/
PR ld/20882
* testsuite/ld-gc/gc.exp: Run pr20882.
* testsuite/ld-gc/pr20882.d: New file.
* testsuite/ld-gc/pr20882a.s: Likewise.
* testsuite/ld-gc/pr20882b.s: Likewise.
* testsuite/ld-gc/pr20882c.s: Likewise.
dynamic_ref_after_ir_def is a little odd compared to other symbol
flags in that as the name suggests, it is set only for certain
references after a definition. It turns out that setting a flag for
any non-ir reference from a dynamic object can be used to solve the
problem for which this flag was invented, which I think is a cleaner.
This patch does that, and sets non_ir_ref only for regular object
references.
include/
* bfdlink.h (struct bfd_link_hash_entry): Update non_ir_ref
comment. Rename dynamic_ref_after_ir_def to non_ir_ref_dynamic.
ld/
* plugin.c (is_visible_from_outside): Use non_ir_ref_dynamic.
(plugin_notice): Set non_ir_ref for references from regular
objects, non_ir_ref_dynamic for references from dynamic objects.
bfd/
* elf64-ppc.c (add_symbol_adjust): Transfer non_ir_ref_dynamic.
* elflink.c (elf_link_add_object_symbols): Update to use
non_ir_ref_dynamic.
(elf_link_input_bfd): Test non_ir_ref_dynamic in addition to
non_ir_ref.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
If there are more than GNU property note in an input, we should merge
X86_ISA_1_USED and X86_ISA_1_NEEDED properties.
bfd/
* elf32-i386.c (elf_i386_parse_gnu_properties): Merge
GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED
properties.
* elf64-x86-64.c (elf_x86_64_parse_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run property-x86-3.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-3.d: New file.
* testsuite/ld-i386/property-x86-3.s: Likewise.
* testsuite/ld-x86-64/property-x86-3.d: Likewise.
* testsuite/ld-x86-64/property-x86-3.s: Likewise.
Rename .plt.bnd to .plt.sec to indicate that this is used as the second
PLT section. There is no change in run-time behavior. We also scan the
.plt.sec section to synthesize PLT symbols.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Rename plt_bnd
to plt_second.
(elf_x86_64_link_hash_table): Rename plt_bnd/plt_bnd_eh_frame
to plt_second/plt_second_eh_frame.
(elf_x86_64_link_hash_newfunc): Updated.
(elf_x86_64_allocate_dynrelocs): Likewise.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_finish_dynamic_symbol): Likewise.
(elf_x86_64_finish_dynamic_sections): Likewise.
(elf_x86_64_plt_type): Rename plt_bnd to plt_second.
(elf_x86_64_get_synthetic_symtab): Updated. Also scan the
.plt.sec section.
(elf_backend_setup_gnu_properties): Updated. Create the
.plt.sec section instead of the .plt.sec section.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): Replace
.plt.bnd with .plt.sec.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
* testsuite/ld-x86-64/mpx3.dd: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
This patch partially reverses:
commit 25070364b0
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat May 16 07:00:21 2015 -0700
Don't generate PLT relocations for now binding
to support LD_AUDIT and LD_PROFILE with -z now. If there is an existing
GOT relocation, it is still used to avoid PLT relocation against the same
function symbol.
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Partially revert
commit 25070364b0.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewse.
ld/
* testsuite/ld-i386/plt-pic2.dd: Updated.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/pr17689now.rd: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/pr17689now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
All linker targets based on elf32-i386 should check relocations after
opening all inputs since this is how elf32-i386 works.
* emulparams/i386lynx.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Set
to yes.
* emulparams/i386moss.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/i386nw.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Likewise.
When -z bndplt is used, we must use the .plt.bnd entry for IFUNC function
address.
bfd/
PR ld/21481
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Use .plt.bnd
for IFUNC function address.
ld/
PR ld/21481
* testsuite/ld-x86-64/pr21481a.c: New file.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/21481 tests.
On x86-64, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
When linker is invoked with "-z bndplt", a different PLT layout in .plt
is used:
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
PLT1: push name1_reloc_index
bnd jmp PLT0
nop
together with a second PLT section, .pl.bnd:
PLT1: bnd jmp *GOT[name1_index]
nop
where the GOT entry of name1 is filled with the address of the push
instruction of the corresponding entry in .plt.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from x86-64 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to x86-64
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in x86-64 setup_gnu_properties, based
on "-z bndplt" and target selection. PLT section alignment is also set
to PLT entry size for non-NaCl target.
3. Remove elf_x86_64_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all x86-64 specific dynamic sections with alignment to their entry
size in x86-64 setup_gnu_properties, which initializes elf.dynobj, so
that x86-64 check_relocs can be simplified.
4. Rewrite elf_x86_64_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
There is no change in PLT. The only externally visible change is the
improvement of synthetic PLT symbols for .plt.got.
bfd/
* elf64-x86-64.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_x86_64_plt0_entry): Renamed to ...
(elf_x86_64_lazy_plt0_entry): This.
(elf_x86_64_plt_entry): Renamed to ...
(elf_x86_64_lazy_plt_entry): This.
(elf_x86_64_bnd_plt0_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt0_entry): This.
(elf_x86_64_legacy_plt_entry): Removed.
(elf_x86_64_bnd_plt_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt_entry): This.
(elf_x86_64_legacy_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_plt_entry): This.
(elf_x86_64_bnd_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_bnd_plt_entry): This.
(elf_x86_64_eh_frame_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_plt): This.
(elf_x86_64_eh_frame_bnd_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_bnd_plt): This.
(elf_x86_64_eh_frame_plt_got): Renamed to ...
(elf_x86_64_eh_frame_non_lazy_plt): This.
(elf_x86_64_lazy_plt_layout): New.
(elf_x86_64_non_lazy_plt_layout): Likewise.
(elf_x86_64_plt_layout): Likewise.
(elf_x86_64_backend_data): Remove PLT layout information. Add
os for target system.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_x86_64_lazy_plt): New.
(elf_x86_64_non_lazy_plt): Likewise.
(elf_x86_64_lazy_bnd_plt): Likewise.
(elf_x86_64_non_lazy_bnd_plt): Likewise.
(elf_x86-64_arch_bed): Updated.
(elf_x86_64_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_x86_64_create_dynamic_sections): Removed.
(elf_x86_64_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_x86-64_adjust_dynamic_symbol): Updated.
(elf_x86_64_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0. Get plt_entry_size from
non_lazy_plt for non-lazy PLT entries.
(elf_x86_64_size_dynamic_sections): Updated. Get plt_entry_size
from non_lazy_plt for non-lazy PLT entries.
(elf_x86-64_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_x86_64_finish_dynamic_symbol): Updated. Fill the first slot
in the PLT entry with generic PLT layout. Fill the non-lazy PLT
entries with non-lazy PLT layout. Don't fill the second and third
slots in the PLT entry if there is no PLT0.
(elf_x86_64_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(compare_relocs): New.
(elf_x86_64_plt_type): Likewise.
(elf_x86_64_plt): Likewise.
(elf_x86_64_nacl_plt): New. Forward declaration.
(elf_x86_64_get_plt_sym_val): Removed.
(elf_x86_64_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_x86_64_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_x86_64_nacl_plt): New.
(elf_x86_64_nacl_arch_bed): Updated.
ld/
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: New file.
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/plt2.s: Likewise.
* testsuite/ld-x86-64/pr20830a-now.d: Likewise.
* testsuite/ld-x86-64/pr20830b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038a-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/load1b-nacl.d: Updated.
* testsuite/ld-x86-64/load1b.d: Likewise.
* testsuite/ld-x86-64/plt-main-bnd.dd: Likewise.
* testsuite/ld-x86-64/pr20253-1h.d: Likewise.
* testsuite/ld-x86-64/pr20830a.d: Update the .plt.got section
with func@plt.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
* testsuite/ld-x86-64/mpx.exp: Add some -z now tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
On i386, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from i386 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to i386
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in i386 setup_gnu_properties, based
on PIC and target selection. PLT section alignment is also set to PLT
entry size for non-NaCl/VxWorks target.
3. Remove elf_i386_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all i386 specific dynamic sections in i386 setup_gnu_properties,
which initializes elf.dynobj, so that i386 check_relocs can be simplified.
4. Rewrite elf_i386_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
bfd/
* elf32-i386.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_i386_plt0_entry): Renamed to ...
(elf_i386_lazy_plt0_entry): This.
(elf_i386_plt_entry): Renamed to ...
(elf_i386_lazy_plt_entry): This.
(elf_i386_pic_plt0_entry): Renamed to ...
(elf_i386_pic_lazy_plt0_entry): This.
(elf_i386_pic_plt_entry): Renamed to ...
(elf_i386_pic_lazy_plt_entry): This.
(elf_i386_got_plt_entry): Renamed to ...
(elf_i386_non_lazy_plt_entry): This.
(elf_i386_pic_got_plt_entry): Renamed to ...
(elf_i386_pic_non_lazy_plt_entry): This.
(elf_i386_eh_frame_plt): Renamed to ...
(elf_i386_eh_frame_lazy_plt): This.
(elf_i386_eh_frame_plt_got): Renamed to ...
(elf_i386_eh_frame_non_lazy_plt): This.
(elf_i386_plt_layout): Renamed to ...
(elf_i386_lazy_plt_layout): This. Remove eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_non_lazy_plt_layout): New.
(elf_i386_plt_layout): Likewise.
(elf_i386_non_lazy_plt): Likewise.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_i386_plt): Renamed to ...
(elf_i386_lazy_plt): This.
(elf_i386_backend_data): Remove plt. Rename is_vxworks to os.
(elf_i386_arch_bed): Updated.
(elf_i386_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_i386_create_dynamic_sections): Removed.
(elf_i386_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_i386_adjust_dynamic_symbol): Updated.
(elf_i386_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0.
(elf_i386_size_dynamic_sections): Updated. Check whether GOT
output section is discarded only if GOT isn't empty.
(elf_i386_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_i386_finish_dynamic_symbol): Updated. Don't fill the
second and third slots in the PLT entry if there is no PLT0.
(elf_i386_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(elf_i386_nacl_plt): Forward declaration.
(elf_i386_get_plt_sym_val): Removed.
(elf_i386_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_i386_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_i386_nacl_plt): Updated.
(elf_i386_nacl_arch_bed): Likewise.
(elf_i386_vxworks_arch_bed): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Add some -z now tests.
* testsuite/ld-i386/plt-pic2.dd: New file.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/plt2.s: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-i386/pr20830.d: Update the .plt.got section
with func@plt.
For ELF targets --out-implib currently generates an executable file
(e_type is ET_EXEC) despite the file being expected to be linked against
some other object file to make an executable later. It seems therefore
more sensible to make the import library a relocatable object file
(e_type set to ET_REL).
Incidentally, as dicted by requirement 8 of
"ARM v8-M Security Extensions: Requirements on Development Tools"
(document ARM-ECM-0359818) version 1.0, import libraries generated when
using --cmse-implib *must* be relocatable object file so this commit
also adds an assert there in case the type of ELF import library is
changed again in the future.
2017-05-08 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elflink.c (elf_output_implib): Remove executable flag from import
library bfd.
* elf32-arm.c (elf32_arm_filter_implib_symbols): Assert that the import
library is a relocatable object file.
ld/
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): Check e_type field
of import library and executable produced.
* testsuite/ld-arm/cmse-implib.type: Expectations for e_type field.
Fix a host of problems related to adjustment of
symbol values and sizes when relaxing for avr.
1. Adjust symbol size first before adjusting symbol
value. Otherwise, a symbol whose value just got adjusted to the
relaxed address also ends up getting resized. See pr21404-1.s.
2. Reduce symbol sizes only if their span is below an
alignment boundary. Otherwise, the size gets decremented once when the
actual instruction is relaxed and padding bytes are added, and again
when the padding bytes are deleted (if padding ends up being unnecessary).
pr21404-2.s addresses that, and this bug is really the root cause of PR21404.
3. Adjust all symbol values before an alignment boundary.
Previous code did not adjust symbol values if they fell in the
would-be padded area, resulting in incorrect symbol values in some
cases (see pr21404-3.s).
4. Increase symbol sizes if alignment directives require so.
As pr21404-4.s shows
.global nonzero_sym
L1:
jmp L1
nonzero_sym:
nop
nop
.p2align 2
.size nonzero_sym, .-nonzero_sym
The two nops satisfy the 4 byte alignment at assembly time and
therefore the size of nonzero_sym is 4. Relaxation shortens
the 4 byte jmp to a 2 byte rjmp, and to satisfy 4 byte alignment
the code places 2 extra padding bytes after the nops, increasing
nonzero_sym's size by 2. This wasn't handled before.
If the assembly code does not have any align directives, then the
boundary is the section size, and symbol values and sizes == boundary
should also get adjusted. To handle that case, add a did_pad variable
and use that to determine whether it should use < boundary or <= boundary.
Also get rid of reloc_toaddr, which is now redundant. toaddr is now not
adjusted to handle the above case - the newly added
did_pad variable does the job.
pr21404-{5,6,7,8} are the same testcases written for local symbols, as
the code handles them slightly differently.
Implement the relaxation of MIPS16 PC-relative synthetic LA, DLA, LW and
LD instructions to an equivalent sequence of instructions produced where
the address operand requested is out of range, absolute or requires
linker relocation, for ABIs that use 32-bit addressing and non-PIC code.
The sequence generated uses the register specified for the destination
operand as a temporary and begins with LI to load the high 16-bit part
of the address, then continues with SLL by 16 bits to move that part
into place and finally completes with a suitable operation corresponding
to the synthetic instruction used, one of: 2-argument ADDIU, 2-argument
DADDIU, absolute LW, and absolute LD respectively, providing the low
16-bit part of the address. All instructions use the extended encoding.
As a special exception accept absolute addresses for relaxation even in
PIC code.
For example:
la $2, 0x12345678
produces code as:
li $2, 0x1234
sll $2, $2, 16
addiu $2, 0x5678
would.
Where linker relocation is required emit an R_MIPS16_HI16 relocation on
the initial LI instruction and an R_MIPS16_LO16 relocation on the final
operation.
For example (where `foo' is not local):
lw $3, foo
produces code as:
li $3, %hi(foo)
sll $3, $3, 16
lw $3, %lo(foo)($3)
would.
Emit assembly warnings as appropriate where this new relaxation triggers
in the `nomacro' mode or for an instruction manually placed in a branch
delay slot in the `noreorder' mode. Refrain from relaxation where an
explicit instruction size suffix has been used and in the `noautoextend'
mode.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `pic', `sym32' and
`nomacro' flags.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO):
New macros.
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): Shift bits.
(RELAX_MIPS16_MACRO, RELAX_MIPS16_MARK_MACRO)
(RELAX_MIPS16_CLEAR_MACRO): New macros.
(append_insn): Pass `mips_pic', HAVE_32BIT_SYMBOLS and
`mips_opts.warn_about_macros' settings to RELAX_MIPS16_ENCODE.
(mips16_macro_frag): New function.
(md_estimate_size_before_relax): Handle HI16/LO16 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove error output,
add dump patterns.
* testsuite/gas/mips/mips16e@relax-swap3.d: New test
subarchitecture.
* testsuite/gas/mips/micromips@relax-swap3.d: Remove trailing
NOP padding.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16@relax-swap3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: Remove file.
* testsuite/gas/mips/relax-swap3.s: Adjust trailing padding.
* testsuite/gas/mips/mips16-pcrel-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16-pcrel-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-2.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-3.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-4.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-5.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-8.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-9.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-absolute-4.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-6.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-8.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-9.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute-2.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.s: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-pcrel-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-6.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Adjust testsuite/ld-elf/pr21384.d to accommodate additional dynamic
symbols on some targets.
* testsuite/ld-elf/pr21384.d: Adjusted to accommodate
additional dynamic symbols on some targets.
Complement commit 88a7ef1689 ("MIPS16/GAS: Restore unsupported
relocation diagnostics") and also propagate constant expressions, either
already reduced from absolute symbol references or created from literals
in the first place, used as a PC-relative operand with the MIPS16 LA,
LW, DLA and LD synthetic instructions to relaxation, matching the way
forward absolute symbol references have been handled as from the commit
referred and letting relaxation produce any necessary relocations, if
possible, for the absolute value requested to be reproduced at the run
time.
Call `symbol_append' for any expression symbol created for the purpose
of MIPS16 relaxation as with constant expressions now propagated from
earlier on such symbols may make it through and have R_MIPS16_PC16_S1
relocations emitted against, and therefore need to appear in the symbol
table produced.
gas/
* config/tc-mips.c (append_insn): Call `symbol_append' for any
expression symbol created for MIPS16 relaxation.
(match_mips16_insn): Don't encode a constant value as an
immediate with a PC-relative operand.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n32-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n64-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64-1.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-1.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-2.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute-1.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32-1.d:
New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64-1.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
* testsuite/ld-i386/tls.exp: Add -Wl,--no-as-needed to
"TLS without PLT (1)" and "TLS without PLT (3)".
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to
to "TLS without PLT (3)".
Check if GNU2 TLS really works before running GNU2 TLS tests.
* testsuite/ld-i386/tls.exp: Run GNU2 TLS tests only if there
is working GNU2 TLS support.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/lib/ld-lib.exp (check_gnu2_tls_available): New proc.
This patch creates dynamic sections in i386/x86-64 create_dynamic_sections
instead of creating them on demend. Linker will strip them if they are
empty. It changes order in x86-64 .eh_frame section. The extra DW_CFA_nop
paddings is due to
https://sourceware.org/bugzilla/show_bug.cgi?id=21441
bfd/
* elf32-i386.c (elf_i386_create_dynamic_sections): Create the
.plt.got section here.
(elf_i386_check_relocs): Don't create the .plt.got section.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Create
the .plt.got and .plt.bnd sections here.
(elf_x86_64_check_relocs): Don't create the .plt.got nor
.plt.bnd sections.
ld/
* testsuite/ld-x86-64/pr21038a.d: Update DW_CFA_nop paddings
in .eh_frame section.
* testsuite/ld-x86-64/pr21038c.d: Update .eh_frame order.
x86, PLT relocation may contain R_386_TLS_DESC or R_X86_64_TLSDESC
even though there is no real PLT. We need to add DT_PLTRELSZ, DT_PLTREL
and DT_JMPREL if there is a .rel.plt/.rela.plt section.
bfd/
* elf32-i386.c (elf_i386_size_dynamic_sections): Alwasys add
DT_PLTRELSZ, DT_PLTREL and DT_JMPREL for .rel.plt section.
* elf64-x86-64.c (elf_x86_64_size_dynamic_sections): Alwasys
add DT_PLTRELSZ, DT_PLTREL and DT_JMPREL for .rela.plt section.
ld/
* testsuite/ld-i386/tlsdesc2.d: New test.
* testsuite/ld-x86-64/tlsdesc2.d: Likewise.
Complement commit e17b0c351f ("MIPS/BFD: Respect the ELF gABI dynamic
symbol table sort requirement") and correct an inconsistency in dynamic
symbol accounting data causing an assertion failure in the MIPS backend:
ld: BFD (GNU Binutils) 2.28.51.20170330 assertion fail
../../binutils-gdb/bfd/elfxx-mips.c:3860
in the course of making a GOT entry in a static binary to satisfy a GOT
relocation present in input, due to the local dynamic symbol count not
having been established.
To do so let backends request `_bfd_elf_link_renumber_dynsyms' to be
always called, rather than where a dynamic binary is linked only, and
then make this request in the MIPS backend.
bfd/
PR ld/21334
* elf-bfd.h (elf_backend_data): Add `always_renumber_dynsyms'
member.
* elfxx-target.h [!elf_backend_always_renumber_dynsyms]
(elf_backend_always_renumber_dynsyms): Define.
(elfNN_bed): Initialize `always_renumber_dynsyms' member.
* elfxx-mips.h (elf_backend_always_renumber_dynsyms): Define.
* elflink.c (bfd_elf_size_dynamic_sections): Also call
`_bfd_elf_link_renumber_dynsyms' if the backend has requested
it.
(bfd_elf_size_dynsym_hash_dynstr): Likewise.
ld/
PR ld/21334
* testsuite/ld-mips-elf/pr21334.dd: New test.
* testsuite/ld-mips-elf/pr21334.gd: New test.
* testsuite/ld-mips-elf/pr21334.ld: New test linker script.
* testsuite/ld-mips-elf/pr21334.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Force symbol dynamic if it isn't undefined weak. Generate relative
relocation for GOT reference against non-dynamic symbol in PIC to
avoid unnecessary dynamic symbols.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add
no_finish_dynamic_symbol.
(elf_x86_64_link_hash_newfunc): Set no_finish_dynamic_symbol to
0.
(elf_x86_64_allocate_dynrelocs): If a symbol isn't undefined
weak symbol, don't make it dynamic.
(elf_x86_64_relocate_section): If a symbol isn't dynamic in PIC,
set no_finish_dynamic_symbol and generate R_X86_64_RELATIVE
relocation for GOT reference.
(elf_x86_64_finish_dynamic_symbol): Abort if
no_finish_dynamic_symbol isn't 0.
ld/
* testsuite/ld-x86-64/no-plt.exp: Also check no-plt-1e.nd.
* testsuite/ld-x86-64/no-plt-1e.nd: New file.
commit f129e49f4d
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Jan 10 11:30:25 2017 -0800
Don't use elf_i386_eh_frame_plt directly
fixed i386 PLT eh_frame generation. Skip pr12570 tests since they are
for non-nacl targets.
* testsuite/ld-i386/pr12570a.d: Skip for nacl targets.
* testsuite/ld-i386/pr12570b.d: Likewise.
commit a27e437177
Author: Roland McGrath <roland@gnu.org>
Date: Thu Jul 28 22:35:15 2011 +0000
BFD vector for elf32-i386-nacl:
changed ELF_MAXPAGESIZE to 0x10000 for VxWorks. This patch fixes it
and updated testsuite/ld-i386/vxworks2.sd to add space for program
headers.
bfd/
PR ld/21425
* elf32-i386.c (ELF_MAXPAGESIZE): Set to 0x1000 for VxWorks.
ld/
PR ld/20815
* testsuite/ld-i386/vxworks2.sd: Add space for program headers.
A few tests in the ld testsuite were expecting the disassembler to
emit `rett' instructions in V9. This patch updates the tests to
expect `return' instead.
ld/ChangeLog:
2017-04-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/ld-sparc/tlssunbin64.dd: Expect `return' instructions
instead of `rett' in V9.
* testsuite/ld-sparc/tlssunnopic64.dd: Likewise.
* testsuite/ld-sparc/tlssunpic64.dd: Likewise.
GOT reference to global symbol in PIE will lead to dynamic symbol. It
becomes a problem when "time" or "times" is defined as a variable in
an executable, clashing with functions of the same name in libc. If
a symbol isn't undefined weak symbol, don't make it dynamic in PIE and
generate R_386_RELATIVE relocation.
bfd/
PR ld/21402
* elf32-i386.c (elf_i386_link_hash_entry): Add
no_finish_dynamic_symbol.
(elf_i386_link_hash_newfunc): Set no_finish_dynamic_symbol to 0.
(elf_i386_allocate_dynrelocs): If a symbol isn't undefined weak
symbol, don't make it dynamic in PIE.
(elf_i386_relocate_section): If a symbol isn't dynamic in PIE,
set no_finish_dynamic_symbol and generate R_386_RELATIVE
relocation for R_386_GOT32
(elf_i386_finish_dynamic_symbol): Abort if no_finish_dynamic_symbol
isn't 0.
ld/
PR ld/21402
* testsuite/ld-elf/indirect.exp: Don't skip PIE indirect5 and
indirect6 tests on i386.
When -static -E/--dynamic-list are passed to linker, linker may create
executable with dynamic sections which aren't supported by run-time.
We require --no-dynamic-linker together with -static -E/--dynamic-list
before adding dynamic symbol table to static executable.
bfd/
PR ld/19617
PR ld/21086
* elflink.c (elf_link_add_object_symbols): Require
--no-dynamic-linker with -E/--dynamic-list when creating
dynamic sections.
ld/
PR ld/19617
PR ld/21086
* testsuite/ld-elf/pr19617a.d: Pass --no-dynamic-linker to ld.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
*testsuite/ld-i386/pr19636-4d.d: Likewise.
* testsuite/ld-elf/readelf.exp: Pass --no-dynamic-linker to ld
with --export-dynamic.
* testsuite/ld-elf/shared.exp: Pass --no-dynamic-linker to ld
with -E.
On i386, since GOT reference is needed to access global symbols in PIE,
those symbols are made dynamic. Crash happens when there is a reference
to the same global symbol with a different symbol type in a shared
object. Since mixing different types of the same symbol doesn't work in
general, this patch skips those tests on i386 as well as compiles non-PIE
indirect5 and indirect6 tests with $NOPIE_LDFLAGS and $NOPIE_CFLAGS.
PR ld/21402
* testsuite/ld-elf/indirect.exp: Pass $NOPIE_LDFLAGS and
$NOPIE_CFLAGS to non-PIE indirect5 and indirect6 tests. Skip
PIE indirect5 and indirect6 tests on i386.
Complement commit 3807734dbe ("PR ld/15428: MIPS/LD/testsuite:
Un-KFAIL `__ehdr_start' test 2") and join tests that do not need to be
split anymore.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Join `__ehdr_start' tests.
We need to make an IR symbol visible if it is defined in an IR object
and referenced in a dynamic object. When --as-needed is used, since
linker removes the IR symbol reference of the dynamic object if the
dynamic object isn't needed in the first pass, the IR definition isn't
visible to the dynamic object even if the dynamic object becomes needed
in the second pass. Add dynamic_ref_after_ir_def to bfd_link_hash_entry
to track IR symbol which is defined in an IR object and later referenced
in a dynamic object. dynamic_ref_after_ir_def is preserved when restoring
the symbol table for unneeded dynamic object.
bfd/
PR ld/21382
* elflink.c (elf_link_add_object_symbols): Preserve
dynamic_ref_after_ir_def when restoring the symbol table for
unneeded dynamic object.
include/
PR ld/21382
* bfdlink.h (bfd_link_hash_entry): Add dynamic_ref_after_ir_def.
ld/
PR ld/21382
* plugin.c (is_visible_from_outside): Symbol may be visible
from outside if dynamic_ref_after_ir_def is set.
(plugin_notice): Set dynamic_ref_after_ir_def if the symbol is
defined in an IR object and referenced in a dynamic object.
* testsuite/ld-plugin/lto.exp: Run PR ld/21382 tests.
* testsuite/ld-plugin/pr21382a.c: New file.
* testsuite/ld-plugin/pr21382b.c: Likewise.
Since undefined IFUNC symbol is treated as normal FUNC symbol, don't
abort on undefined IFUNC symbol in the second PLT.
bfd/
PR ld/21401
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Don't abort
on on undefined IFUNC symbol in the second PLT.
ld/
PR ld/21401
* testsuite/ld-ifunc/ifunc.exp: Add a libtest-2-now.so test with
-z now.
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
commit 902e9fc76a
Author: Maciej W. Rozycki <macro@imgtec.com>
Date: Tue Feb 21 01:46:42 2017 +0000
PR ld/20828: Move symbol version processing ahead of GC symbol sweep
breaks version definition with --version-script --soname. This patch
fixes it by getting soname index before generating the version definition
section.
bfd/
PR ld/21389
* elflink.c (bfd_elf_size_dynamic_sections): Get soname index
before generating the version definition section.
ld/
PR ld/21389
* testsuite/ld-elf/pr21389.map: New file.
* testsuite/ld-elf/pr21389.s: Likewise.
* testsuite/ld-elf/pr21389a.d: Likewise.
* testsuite/ld-elf/pr21389b.d: Likewise.
* testsuite/ld-elf/pr21389c.d: Likewise.
We already handle the case of an object file first defining a symbol
that a later shared library also defines where the symbol types are
incompatible. This patch handles the reverse, when a later object
file defines an incompatible symbol defined by an earlier shared
library.
bfd/
* elflink.c (_bfd_elf_merge_symbol): Undo dynamic linking
state when a regular object file defines a symbol with
incompatible type to that defined by an earlier shared lib.
ld/
* testsuite/ld-elf/indirect5a.c,
* testsuite/ld-elf/indirect5b.c,
* testsuite/ld-elf/indirect5.map,
* testsuite/ld-elf/indirect5.out: New test.
* testsuite/ld-elf/indirect6a.c: Likewise.
* testsuite/ld-elf/indirect.exp (check_dynamic_syms): New proc.
Run new tests and check dynsyms.
Don't use fixed size buffers for symbol names.
PR 21274
PR 18466
* emultempl/pe.em (pe_find_data_imports): Don't use fixed size
symbol buffer. Instead, xmalloc max size needed with space for
prefix. Wrap overlong lines. Formatting. Pass symbol buffer
copy of name to pe_walk_relocs_of_symbol.
(make_inport_fixup): Add "name" param, pass to pe_create_import_fixup.
* emultempl/pe.em (pep_find_data_imports): As for pe_find_data_imports.
(make_import_fixup): Add "name" param, pass to pep_create_import_fixup.
Use bfd_get_signed_* and remove unnecessary casts. Formatting.
* pe-dll.c (pe_walk_relocs_of_symbol): Add "name" param. Pass to
callback.
(make_import_fixup_mark): Add "name" param. Make use of prefix
space rather than xmalloc here.
(pe_create_import_fixup): Likewise.
* pe-dll.h (pe_walk_relocs_of_symbol): Update prototype.
(pe_create_import_fixup): Likewise.
* pep-dll.h (pep_walk_relocs_of_symbol): Likewise.
(pep_create_import_fixup): Likewise.
