gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
printf-like functions to avoid type related warnings on all
platforms.
(get_child_debug_event): Print dwDebugEventCode as hex since
that's how it's usually documented.
* gdb.trace/report.exp: Move some code to ...
(use_collected_data): New.
(top level): Call use_collected_data once on the live target.
Save at file of the current trace session, load it with target
tfile, and call use_collected_data again.
printf-like functions to avoid type related warnings on all
platforms.
(handle_output_debug_string): Fetch context information address
from debug string using string_to_core_addr.
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.
gdbserver/
* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function. Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function. The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.
2013-02-27 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_trace_find): For tfind
pc/tp/range/outside, look for the next trace frame instead of
always starting from frame 0.
The "you have broken" bit of this text reads to me as if I had broken
it myself somehow. This patch eliminates that ambiguity.
2013-02-25 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
warning text.
symbol size.
* ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
* ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
* ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
* ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
Code cleanup.
* elfread.c (build_id_bfd_get): Make the return type const.
(build_id_verify): Make the check parameter const.
(build_id_to_debug_filename): Make the build_id parameter and variable
data const.
(find_separate_debug_file_by_buildid): Make the variable build_id const.
(Values From Inferior, Types In Python, Inferiors In Python)
(Events In Python, Threads In Python, Frames In Python, Blocks In
Python, Symbols In Python, Symbol Tables In Python): Remove
@tables.
(Packets, General Query Packets, Tracepoint Packets)
(Host I/O Packets): Use @w{} for empty @item.
* python/py-arch.c (archpy_disassmble): Implementation of the
new method gdb.Architecture.disassemble.
(arch_object_methods): Add entry for the new method.
* doc/gdb.texinfo (Architectures In Python): Add description
about the new method gdb.Architecture.disassemble.
* testsuite/gdb.python/py-arch.c: New test case
* testsuite/gdb.python/py-arch.exp: New tests to test
gdb.Architecture.disassemble
* testsuite/gdb.python/Makefile.in: Add py-arch to the list of
EXECUTABLES.
Addresses, as most numbers in the RSP are hex encoded, with variable
length (that just means the width isn't specified, and there's no top
cap. So they should be extracted with unpack_varlen_hex.
A couple spots in server.c are using strto(u)l, which doesn't work on
LLP64 targets.
This patch fixes it.
Tested on x86_64 Fedora 17.
2013-02-19 Pedro Alves <palves@redhat.com>
Kai Tietz <ktietz@redhat.com>
PR gdb/15161
* server.c (handle_query) <CRC check>: Use unpack_varlen_hex
instead of strtoul to extract address from packet.
(process_serial_event) <'z'>: Likewise.
While touching monitor_load in a previous patch, I noticed this method
is no longer set to anything other than NULL in the tree, so we can
remove it.
Tested by building with --enable-targets=all.
2013-02-19 Pedro Alves <palves@redhat.com>
Garbage collect 'struct monitor_ops'::load_routine.
* monitor.h (struct monitor_ops) <load_routine>: Remove field.
* monitor.c (monitor_load): No longer call
current_monitor->load_routine.
* dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
* m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
* ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
Harmonize this old-looking code with generic_load, which fixes several
issues.
2013-02-19 Pedro Alves <palves@redhat.com>
PR gdb/15161
Harmonize with generic_load.
* monitor.c: Include "readline/readline.h".
(monitor_load): Rename parameter 'file' to 'args'. Use build_argv
instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
long/strtol for the 'load_offset' local. Error out if no argument
is given or if too many arguments are given. Tilde expand the
passed in file name.
* symfile.c (load_section_data): Change type of load_offset
to CORE_ADDR.
(generic_load): User strtoulst instead of strtoul for conversion
of load_offset.
Jan Kratochvil