xmrealloc): Move existing declarations to the one place and
re-order to be consistent.
(xmcalloc, xmfree): Declare.
(xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
declaration.
* utils.c (size_t): Delete #ifdef defining size_t.
(mmalloc, mrealloc, mcalloc, mfree): Re-order.
(mmalloc, mrealloc, mcalloc): Document as only calls in GDB
corresponding malloc, realloc, calloc.
(mfree): Call free directly.
(xmmalloc, xmrealloc): Clean up. Assume ISO-C.
(xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
function bodies to here.
(xcalloc, xfree): Call xmcalloc and xmfree respectfully.
and watchpoints on x86 targets.
* i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
[HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
(DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
appropriate value if not already defined.
(register_u_addr): New function.
(kernel_u_size): New function.
(i386_linux_dr_get, i386_linux_dr_set): New functions.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
* config/i386/nm-linux.h: Don't include "nm-i386v.h".
(I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
(TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
target_remove_watchpoint): Remove macros.
(i386_stopped_by_watchpoint, i386_insert_watchpoint,
i386_remove_watchpoint): Remove prototypes.
(register_u_addr): New prototype.
(REGISTER_U_ADDR): Define in terms of register_u_addr.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
(I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
* config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
i386-nat.o.
significant in *un*mangled method names. Use strcmp_iw to compare
them, not STREQ. (Fix from Daniel Berlin.)
* gdb/testsuite/gdb.c++/userdef.exp: Check that GDB tolerates whitespace in
unmangled operator names.
already defined.
From 2000-08-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>:
* stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
or a reference ('a') can be in a pseudo register.
* infcmd.c (do_registers_info): Must take into account the pseudo
registers to print their value.
(registers_info): Likewise.
* stack.c (frame_info): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
bfd_get_section_name.
(compare_sections_command): Ditto.
(remote_cisco_section_offsets): Make ``p'' a const pointer.
(compare_sections_command): Ditto for ``sectname''.
h8300_frame_args_address from frame_args_address.
(FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
from frame_locals_address.
(PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
from print_register_hook.
(h8300_frame_args_address): Declare.
(h8300_frame_find_saved_regs): Declare.
(h8300_frame_locals_address): Declare.
(h8300_frame_saved_pc): Declare.
(h8300_pop_frame): Declare.
(h8300_print_register_hook): Declare.
* h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
(h8300_frame_args_address): Renamed from frame_args_address.
(h8300_frame_locals_address): Renamed from frame_locals_address.
(h8300_pop_frame): Renamed from pop_frame.
(h8300_print_register_hook): Renamed from print_register_hook.
-------------------------------------------------------------------
handle the situation where the argument is an integer, not an
address -- arguably the most common case. This matters on
targets where pointers and addresses are different.
floatformat_is_nan and floatformat_mantissa.
* utils.c: Include "gdb_assert.h".
(floatformat_is_negative): New function.
(floatformat_is_nan): New function.
(floatformat_mantissa): New function.
* valprint.c: Include "floatformat.h".
(print_floating): Get rid of the Linux-specific
TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
help these new functions. Print NaN's in a format conforming to
ISO C99.
which define include paths used when compiling.
* util.c (savestring, msavestring): Change type of length argument.
* defs.h (savestring, msavestring): Update to match.
* ocd.c (ocd_xfer_memory): Ditto.
* ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
* MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
buildable with ,-Werror.
* Makefile.in (symfile_h): Define.
(mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
* mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
* MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
,-Werror.
* dsrec.c (make_srec): Fix internal_error fmt arg.
* MAINTAINERS: Document i960-coff as buildable with ,-Werror.
* mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
parameter to mn10200_analyze_prologue.
* config/mn10200/tm-mn10200.h: Include "regcache.h".
* MAINTAINERS: Document that mn10200-elf target is buildable.
* printcmd.c (print_address_numeric): Update comments to refer
to sizeof addr, not sizeof pointer.
(x_command): Remove needless whitespace (shorten long line).
! 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
! 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
! 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
! 2001-01-27 Christopher Faylor <cgf@cygnus.com>
* configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
* configure.host: Recognize sparc64-*-linux* as a linux host.
From 2000-03-17 Jakub Jelinek <jakub@redhat.com>:
* config/sparc/tm-sp64linux.h: New file.
From Peter Schauer <Peter.Schauer@regent.e-technik.tu-muenchen.de>
* symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not
lookup_symbol, when trying to find a symbol with a mangled name,
to avoid infinite recursion.
(_initialize_demangler): Fill demangling_style_names with the
names of known demangling styles from libiberty_demanglers[]. Use
add_set_enum_cmd instead of add_set_cmd, to get completion on
demangling style names.
* proc-api.c (_initialize_proc_api): Make `procfs-file' use
file-name completion.
* remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
* solib.c (_initialize_solib): Ditto for `solib-search-path' and
`solib-absolute-prefix'.
* tracepoint.c (_initialize_tracepoint): Ditto for
`save-tracepoints'.
* win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
* cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
file-name completion.
* infcmd.c (_initialize_infcmd): Make the following commands use
the file-name completer: `tty', `args', `path', `paths', and
`run'.
(fetch_register): New function, uses some of the guts of
go32_fetch_registers and i387_supply_register.
(go32_fetch_registers): Most of the code moved into
fetch_register. Use i387_supply_fsave.
(store_register): Use i387_fill_fsave instead of custom code.
(go32_store_registers): Use i387_fill_fsave.
* Makefile.in (go32-nat.o): Depend on i387-nat.h.
* config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
slash from file-name break characters.
[__MSDOS__]: Special definition for DOS/Windows file names.
(line_completion_function): When completing on file names, bump
`p' to the first file-name constituent character of `word', before
invoking the completer.
consistently for parameter names. Fix comments accordingly.
(i387_supply_register): New function.
(i387_supply_fsave): Implement using i387_supply_register.
* i387-nat.h: Use regnum instead of regno consistently for
parameter names. Fix comments accordingly.
(i387_supply_register): New prototype.
* gdb/somsolib.c (som_solib_add_solib_objfile): Do not use
section relocation feature of syms_from_objfile. Do my own
section relocation, offsetting each section of the som by
either text_addr - text_link_addr or data_start.
Andrew Cagney
Jim Blandy
Mark Kettenis
David Smith
Eli Zaretskii
Kevin Buettner
Michael Chastain
J.T. Conklin
Martin Hunt
Keith Seitz
Fernando Nasser
David Taylor
Stan Shebs
Christopher Faylor
Matthew Hiller
Michael Snyder
Elena Zannoni
Jonathan Larmour
Jim Kingdon
Michael Sokolov