* blockframe.c(find_pc_sect_partial_function): look for min syms in
the same section when trying to guess the end of a function.
* symfile.c(list_overlays_command): use print_address_numeric
* remote-sim.c: export simulator_command
* tm-r5900.h: add COP0 registers
* txvu-tdep.c: printvector and printvector-order commands
* tm-txvu.h: add COP0 registers
* mips-tdep.c: use NUM_CORE_REGS
* breakpoint.c (bpstat_stop_status): Declare a bp match if the
current fp matches the bp->fp OR if the current fp is less than
the bp->fp if we're looking at a bp_step_resume breakpoint.
PR 15992.
With a bp_step_resume type breakpoint, the frame pointer check exists in
case we recurse and execute the same text section--we want to not stop
there because it would confuse the user. So gdb checks to see that the
frame pointer matches the one recorded in the breakpoint.
If the current frame pointer is less than the frame pointer recorded in
the breakpoint, then something odd is happened and we should declare that
we're at the breakpoint so that we clear it out.
This happens in Purify instrumented executables on PA systems, at least.
They insert some calls out to Purify code in the function epilogue and
it confuses GDB (which assumes that the frame pointer does not move
around through the entire execution of a function).
* symtab.h (struct symtab): Remove EXTRA_SYMTAB_INFO hook,
not currently used.
* symfile.c (allocate_symtab): Deprecate use of
INIT_EXTRA_SYMTAB_INFO here.
pseudo-register, not the same as a3.
(D2_REGNUM, D3_REGNUM, A2_REGNUM, A3_REGNUM): Define.
* mn10300-tdep.c (fix_frame_pointer): New function.
(set_movm_offsets): Use register number macros instead of
hard-coded constants.
(mn10300_analyze_prologue): Fix to handle redefinition of FP_REGNUM.
(mn10300_frame_chain): Fix to handle redefinition of FP_REGNUM;
use register number macros instead of hard-coded constants;
add missing parameter to call of mn10300_analyze_prologue.
(mn10300_frame_saved_pc): Use register number macros instead of
hard-coded constants.
and "global constructors", do not append any elements to the result.
(gdb_get_vars_command): Install patch from Jun 9 1998 which appears
to have been lost.
Clean up some tabbing mess.
* gdbtk-cmds.c (gdb_loadfile): Open the file after doing
the symtab lookup and calling symtab_to_filename(). This
makes GDBtk work with the GDB "dir" command.
* sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
same method on both 32-bit and 64-bit machines.
* sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
support hardware breakpoints.
* config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
(v850ice_load) Pass filename to ICE DLL.
(ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb
commands -- let the GUI do it so that it can retain control
of the display.
.
(gdbtk_selected_frame_changed): New function.
* gdbtk-cmds.c (Gdbtk_Init): Add command gdb_stack into interpreter.
Link gdb's global selected_frame_level with interpreter global
gdb_selected_frame_level.
(gdb_stack): New function to faciltate speedier backtraces from
gdbtk.
(get_frame_name): New helper function for gdb_stack.
* configure.in: Add more header files to AC_CHECK_HEADERS.
* configure: Regenerated.
* command.c: Include wait.h or sys/wait.h if present.
* inftarg.c: Ditto.
* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
on autoconf test.
* infptrace.c: Ditto.
* expprint.c: Include ctype.h for isprint prototype.
* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
present, based on autoconf test.
* utils.c: Include curses.h and term.h if present.
(puts_debug): Change 'carriage_return' local variable to return_p
to avoid name clash.
* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
determine it with autoconf.
* config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
with autoconf.
* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
with autoconf.
* config/i386/nm-i386v.h: Ditto.
* config/i386/nm-symmetry.h: Ditto.
* config/m88k/xm-cxux.h: Ditto.
* config/m88k/xm-dgux.h: Ditto.
* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
* config/m68k/nm-delta68.h: Removed.
* expprint.c expression.h (dump_expression): Rename to
dump_prefix_expression.
* Print out the expression in normal form. Call print_longest
instead of trying to do it ourselves.
* (dump_postfix_expression): New function, prints out the expression
with indentation and better formatting and interpretation.
* parse.c (parse_exp_1): Put calls to dump expressions under ifdef
MAINTENANCE_CMDS and expressiondebug variable.
set to correct VU memory space.
(txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc
* config/tm-txvu.h: use new track-table address
Do note define BREAKPOINT_FROM_PC anymore
(mips_addr_bits_remove): Test mask_address_p to decide whether
to mask off the upper 32 bits of addresses.
(_initialize_mips_tdep): Add command to set mask_address_p.
(mips_call_dummy_address): New function.
* config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
call mips_call_dummy_address.
registers if we are not in am33 mode.
(mn10300_frame_chain, mn10300_frame_saved_pc): Similarly.
(set_machine_hook): Keep track of whether or not we're in am33 mode.
* tracepoint.c (remote_set_transparent_ranges): new function.
Send the start and end addresses of all loadable read-only
sections down to the trace target, so that it can treat them
as "transparent" (ie. don't care if they were collected or not).
* gdbtk.c (gdbtk_call_command): Removed because it is now
in gdbtk-hooks.c
(null_routine): Removed.
* gdbtk-hooks.c (tracepoint_notify): Fix sprintf to
match number of arguments.
* gdbtk-cmds.c (gdb_loc): When calling gdb_loc with an
argument, call find_pc_line() to get a complete
symtab_and_line struct.
* symtab.c (decode_line_1): For minimal symbol, call
find_pc_sect_line() to make sure the line number gets set
properly.
(print_symbol_info): Redeclare function void.
* config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The
stack pointer et al are synthesized from the SP_REGNUM (etc)
defines and should not be mentioned in REGISTER_NAMES.
There is a log discussion copied into PR 15966 about how this is not
handled consistently across all targets and we ought to clean it up
a bit. I'm not tackling the general for this PR, though.
