Starting with DWARF version 4, the description of the DW_AT_high_pc
attribute was amended to say:
if it is of class constant, the value is an unsigned integer offset
which when added to the low PC gives the address of the first
location past the last instruction associated with the entity.
A change was made in Apr 27th, 2012 to reflect that change:
| commit 91da14142c
| Author: Mark Wielaard <mjw@redhat.com>
| Date: Fri Apr 27 18:55:19 2012 +0000
|
| * dwarf2read.c (dwarf2_get_pc_bounds): Check DW_AT_high_pc form to
| see whether it is an address or a constant offset from DW_AT_low_pc.
| (dwarf2_record_block_ranges): Likewise.
| (read_partial_die): Likewise.
Unfortunately, this new interpretation is now used regardless of
the CU's DWARF version. It turns out that one of WindRiver's compilers
(FTR: Diabdata 4.4) is generating DWARF version 2 info with
DW_AT_high_pc attributes improperly using the data4 form. Because of
that, we miscompute all high PCs incorrectly. This leads to a lot of
symtabs having overlapping ranges, which in turn causes havoc in
pc-to-symtab-and-line translations.
One visible effect is when inserting a breakpoint on a given function:
(gdb) b world
Breakpoint 1 at 0x4005c4
The source location of the breakpoint is missing. The output should be:
(gdb) b world
Breakpoint 1 at 0x4005c8: file dw2-rel-hi-pc-world.c, line 24.
What happens in this case is that the pc-to-SAL translation first
starts be trying to find the symtab associated to our PC using
each symtab's ranges. Because of the high_pc miscomputation,
many symtabs end up matching, and the heuristic trying to select
the most probable one unfortunately returns one that is unrelated
(it really had no change in this case to do any better). Once we
have the wrong symtab, the start searching the associated linetable,
where the addresses are correct, thus finding no match, and therefore
no SAL.
This patch is an attempt at handling the situation as gracefully
as we can, without guarantees. It introduces a new function
"attr_value_as_address" which uses the correct accessor for getting
the value of a given attribute. It then adjust the code throughout
this unit to use this function instead of assuming that addresses always
have the DW_FORM_addr format.
It also fixes the original issue of miscomputing the high_pc
by limiting the new interpretation of constant form DW_AT_high_pc
attributes to units using DWARF version 4 or later.
gdb/ChangeLog:
* dwarf2read.c (attr_value_as_address): New function.
(dwarf2_find_base_address, read_call_site_scope): Use
attr_value_as_address in place of DW_ADDR.
(dwarf2_get_pc_bounds): Use attr_value_as_address to get
the low and high addresses. Slight rework of the handling
of the high pc being a constant form, and limit it to
DWARF verson 4 or higher.
(dwarf2_record_block_ranges): Likewise.
(read_partial_die): Likewise.
(new_symbol_full): Use attr_value_as_address in place of DW_ADDR.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
Tested on x86_64-linux.
This comment explains why we sometimes sign-extend the range type
bounds when we normally shouldn't have to.
gdb/ChangeLog:
* dwarf2read.c (read_subrange_type): Add comment.
Consider the following Ada code:
-- An array whose index is an enumeration type with 128 enumerators.
type Enum_T is (Enum_000, Enum_001, [...], Enum_128);
type Table is array (Enum_T) of Boolean;
When the compiler is configured to generate pure DWARF debugging info,
trying to print type Table's description yields:
ptype pck.table
type = array (enum_000 .. -128) of boolean
The expected output was:
ptype pck.table
type = array (enum_000 .. enum_128) of boolean
The DWARF debugging info for our array looks like this:
<1><44>: Abbrev Number: 5 (DW_TAG_array_type)
<45> DW_AT_name : pck__table
<50> DW_AT_type : <0x28>
<2><54>: Abbrev Number: 6 (DW_TAG_subrange_type)
<55> DW_AT_type : <0x5c>
<59> DW_AT_lower_bound : 0
<5a> DW_AT_upper_bound : 128
The array index type is, by construction with the DWARF standard,
a subrange of our enumeration type, defined as follow:
<2><5b>: Abbrev Number: 0
<1><5c>: Abbrev Number: 7 (DW_TAG_enumeration_type)
<5d> DW_AT_name : pck__enum_t
<69> DW_AT_byte_size : 1
<2><6b>: Abbrev Number: 8 (DW_TAG_enumerator)
<6c> DW_AT_name : pck__enum_000
<7a> DW_AT_const_value : 0
[etc]
Therefore, while processing these DIEs, the array index type ends
up being a TYPE_CODE_RANGE whose target type is our enumeration type.
But the problem is that we read the upper bound as a negative value
(-128), which is then used as is by the type printer to print the
array upper bound. This negative value explains the "-128" in the
output.
To understand why the range type's upper bound is read as a negative
value, one needs to look at how it is determined, in read_subrange_type:
orig_base_type = die_type (die, cu);
base_type = check_typedef (orig_base_type);
[... high is first correctly read as 128, but then ...]
if (!TYPE_UNSIGNED (base_type) && (high & negative_mask))
high |= negative_mask;
The negative_mask is applied, here, because BASE_TYPE->FLAG_UNSIGNED
is not set. And the reason for that is because the base_type was only
partially constructed during the call to die_type. While the enum
is constructed on the fly by read_enumeration_type, its flag_unsigned
flag is only set later on, while creating the symbols corresponding to
the enum type's enumerators (see process_enumeration_scope), after
we've already finished creating our range type - and therefore too
late.
My first naive attempt at fixing this problem consisted in extracting
the part in process_enumeration_scope which processes all enumerators,
to generate the associated symbols, but more importantly set the type's
various flags when necessary. However, this does not always work well,
because we're still in the subrange_type's scope, and it might be
different from the scope where the enumeration type is defined.
So, instead, what this patch does to fix the issue is to extract
from process_enumeration_scope the part that determines whether
the enumeration type should have the flag_unsigned and/or the
flag_flag_enum flags set. It turns out that, aside from the code
implementing the loop, this part is fairly independent of the symbol
creation. With that part extracted, we can then use it at the end
of our enumeration type creation, to produce a type which should now
no longer need any adjustment.
Once the enumeration type produced is correctly marked as unsigned,
the subrange type's upper bound is then correctly read as an unsigned
value, therefore giving us an upper bound of 128 instead of -128.
gdb/ChangeLog:
* dwarf2read.c (update_enumeration_type_from_children): New
function, mostly extracted from process_structure_scope.
(read_enumeration_type): Call update_enumeration_type_from_children.
(process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned
and flag_flag_enum fields.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
Consider the following declarations in Ada...
type Item is range -32 .. 31;
for Item'Size use 6;
type Table is array (Natural range 0 .. 4) of Item;
pragma Pack (Table);
... which declare a packed array whose elements are 6 bits long.
The debugger currently does not notice that the array is packed,
and thus prints values of this type incorrectly. This can be seen
in the "ptype" output:
(gdb) ptype table
type = array (0 .. 4) of foo.item
Normally, the debugger should print:
(gdb) ptype table
type = array (0 .. 4) of foo.item <packed: 6-bit elements>
The debugging information for this array looks like this:
.uleb128 0xf # (DIE (0x15c) DW_TAG_array_type)
.long .LASF9 # DW_AT_name: "pck__table"
.byte 0x6 # DW_AT_bit_stride
.long 0x1a9 # DW_AT_type
.uleb128 0x10 # (DIE (0x16a) DW_TAG_subrange_type)
.long 0x3b # DW_AT_type
.byte 0 # DW_AT_lower_bound
.byte 0x4 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x15c
The interesting part is the DW_AT_bit_stride attribute, which tells
the size of the array elements is 6 bits, rather than the normal
element type's size.
This patch adds support for this attribute by first creating
gdbtypes.c::create_array_type_with_stride, which is an enhanced
version of create_array_type taking an extra parameter as the stride.
The old create_array_type can then be re-implemented very simply
by calling the new create_array_type_with_stride.
We can then use this new function from dwarf2read, to create
arrays with or without stride.
gdb/ChangeLog:
* gdbtypes.h (create_array_type_with_stride): Add declaration.
* gdbtypes.c (create_array_type_with_stride): New function,
renaming create_array_type, but with an added parameter
called "bit_stride".
(create_array_type): Re-implement using
create_array_type_with_stride.
* dwarf2read.c (read_array_type): Add support for DW_AT_byte_stride
and DW_AT_bit_stride attributes.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/arr-stride.c: New file.
* gdb.dwarf2/arr-stride.exp: New file.
The test, relying purely on generating an assembly file, only
verifies the type description of our array. But I was also
able to verify manually that the debugger print values of these
types correctly as well (which was not the case prior to this
patch).
* dwarf2read.c (struct die_info): New member in_process.
(reset_die_in_process): New function.
(process_die): Set it at the start, reset when returning.
(inherit_abstract_dies): Only call process_die if origin_child_die
not already being processed.
testsuite/
* gdb.dwarf2/dw2-icycle.S: New file.
* gdb.dwarf2/dw2-icycle.c: New file.
* gdb.dwarf2/dw2-icycle.exp: New file.
This adds the "main"-related data into the per-BFD. This is needed
because once symbol sharing across objfiles is complete, computing the
main name as a side effect of symbol reading will no longer work --
the symbols simply won't be re-read.
After this change, set_main_name is only used by the main_name
machinery itself, so this patch makes it static.
2014-01-15 Tom Tromey <tromey@redhat.com>
* dbxread.c (process_one_symbol): Use set_objfile_main_name.
* dwarf2read.c (read_partial_die): Use set_objfile_main_name.
* objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
(set_objfile_main_name): New function.
* objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
language_of_main>: New fields.
(set_objfile_main_name): Declare.
* symtab.c (find_main_name): Loop over objfiles to find the main
name and language.
(set_main_name): Now static.
(get_main_info): Add comment.
* symtab.h (set_main_name): Don't declare.
This makes the global language_of_main static. Now it can be set only
via a new argument to set_main_name.
2014-01-15 Tom Tromey <tromey@redhat.com>
* dbxread.c (process_one_symbol): Update.
* dwarf2read.c (read_partial_die): Update.
* symfile.c (set_initial_language): Call main_language.
* symtab.c (language_of_main): Now static.
(set_main_name): Add 'lang' parameter.
(find_main_name): Update.
(main_language): New function.
(symtab_observer_executable_changed): Update.
* symtab.h (set_main_name): Update.
(language_of_main): Remove.
(main_language): Declare.
This patch adds two typedefs:
expand_symtabs_file_matcher_ftype
expand_symtabs_symbol_matcher_ftype
It also renames the NAME_MATCHER argument in expand_symtabs_matching.
The function is named expand_symtabs_matching and it takes a name_matcher
argument. Name of what? The symtab? A symbol?
I made it SYMBOL_MATCHER to make it clearer.
* symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
(expand_symtabs_symbol_matcher_ftype): New typedef.
(quick_symbol_functions.expand_symtabs_matching): Update to use.
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
* symfile.c (expand_partial_symbol_names): Update to use
expand_symtabs_symbol_matcher_ftype.
* dwarf2read.c (dw2_expand_symtabs_matching): Update to use
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
Arg name_matcher renamed to symbol_matcher.
* psymtab.c (recursively_search_psymtabs): Update to use
expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
sym_matcher.
(expand_symtabs_matching_via_partial): Update to use
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
Arg name_matcher renamed to symbol_matcher.
Added new domain MODULE_DOMAIN for fortran modules to avoid
issues with sharing namespaces (e.g. when a variable currently
in scope has the same name as a module).
(gdb) ptype modname
old> No symbol "modname" in current context.
new> type = module modname
This fixes PR 15209 and also addresses the issue
with sharing namespaces:
https://sourceware.org/ml/gdb-patches/2013-02/msg00643.html
2013-11-19 Keven Boell <keven.boell@intel.com>
Sanimir Agovic <sanimir.agovic@intel.com>
* cp-namespace.c (cp_lookup_nested_symbol): Enable
nested lookups for fortran modules.
* dwarf2read.c (read_module): Add fortran module to
the symbol table.
(add_partial_symbol, add_partial_module): Add fortran
module to the partial symbol table.
(new_symbol_full): Create full symbol for fortran module.
* f-exp.y (yylex): Add new module domain to be parsed.
* symtab.h: New domain for fortran modules.
testsuite/
* gdb.fortran/module.exp: Completion matches fortran module
names as well. ptype/whatis on modules return a proper type.
Add new check for having the correct scope.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
* dwarf2read.c (read_index_from_section): Update comment.
(struct dw2_symtab_iterator): New member global_seen.
(dw2_symtab_iter_init): Initialize it.
(dw2_symtab_iter_next): Skip duplicate global symbols.
(dw2_expand_symtabs_matching): Ditto.
* dwarf2read.c (dwarf2_read_debug): Change to unsigned int.
(create_debug_types_hash_table): Only print debugging messages for
each TU if dwarf2-read >= 2.
(process_queue): Ditto.
(_initialize_dwarf2_read): Make "set debug dwarf2-read" a zuinteger.
Update doc string.
doc/
* gdb.texinfo (Debugging Output): Update text for
"set debug dwarf2-read".
When reading objects with corrupt debug information it is possible that
the sibling chain can form a loop, which leads to an infinite loop and
memory exhaustion.
Avoid this situation by disregarding and DW_AT_sibling values that point
to a lower address than the current entry.
gdb/ChangeLog:
2013-11-06 Will Newton <will.newton@linaro.org>
PR gdb/12866
* dwarf2read.c (skip_one_die): Sanity check DW_AT_sibling
values. (read_partial_die): Likewise.
The first one, dw2_get_real_path from gdb/dwarf2read.c, was actually
making use of OBSTACK_CALLOC which already calls "sizeof" for its third
argument.
The second, download_tracepoint_1 from gdb/gdbserver/tracepoint.c, was
explicitly calling "sizeof" inside another "sizeof".
This patch fixed both functions.
gdb/ChangeLog
2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/16014
* dwarf2read.c (dw2_get_real_path): Remove unnecessary call to
sizeof.
gdb/gdbserver/ChangeLog
2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/16014
* tracepoint.c (download_tracepoint_1): Remove unnecessary double
call to sizeof.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Change type of
buildid_len to bfd_size_type.
gdb
* dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
bfd_get_alt_debug_link_info.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
* NEWS: Mention support for DWP file format version 2.
* dwarf2read.c (dwarf2_section_info): Convert asection field to a
union of asection, containing_section. New fields virtual_offset
and is_virtual. Change type of readin filed from int to char.
(dwo_sections, dwo_file): Tweak comments.
(dwp_v2_section_ids): New enum.
(dwp_sections): New fields abbrev, info, line, loc, macinfo, macro,
str_offsets, types.
(virtual_v1_dwo_sections): Renamed from virtual_dwo_sections.
All uses updated.
(virtual_v2_dwo_sections): New struct.
(dwp_hash_table): New fields version, nr_columns. Change type of
section_pool field to a union.
(dwp_file): New field version.
(dwarf2_has_info): Check for virtual sections.
(get_containing_section): New function.
(get_section_bfd_owner, get_section_bfd_section): Call it.
(dwarf2_locate_sections): Update.
(dwarf2_section_empty_p): Update.
(dwarf2_read_section): Handle virtual sections.
(locate_dwz_sections): Update.
(create_dwp_hash_table): Document and handle V2 format.
(locate_v1_virtual_dwo_sections): Renamed from
locate_virtual_dwo_sections and update. All callers updated.
(create_dwo_unit_in_dwp_v1): Renamed from create_dwo_in_dwp.
Delete arg htab. Rename arg section_index to unit_index.
All callers updated.
(MAX_NR_V1_DWO_SECTIONS): Renamed from MAX_NR_DWO_SECTIONS.
All uses updated.
(create_dwp_v2_section, create_dwo_unit_in_dwp_v2): New functions.
(lookup_dwo_unit_in_dwp): Add V2 support.
(dwarf2_locate_dwo_sections): Update.
(dwarf2_locate_common_dwp_sections): Renamed from
dwarf2_locate_dwp_sections and update. All callers updated.
(dwarf2_locate_v2_dwp_sections): New function.
(open_and_init_dwp_file): Add V2 support.
(read_str_index): New locals str_section, str_offsets_section.
(dwp_file): Split loaded_cutus into loaded_cus, loaded_tus.
All uses updated.
(dwarf2_section_empty_p): Rename arg from "info" to "section".
(dwarf2_read_section): Delete unused local "header". Add section
name to error message.
(create_dwo_in_dwp): Tweak comment.
(MAX_NR_DWO_SECTIONS): Combine count of .debug_macro + .debug_macinfo.
(get_section_bfd_owner, get_section_bfd_section): New functions.
(get_section_name, get_section_file_name): New functions.
(get_section_id, get_section_flags): New functions.
(*): Use new functions to access section fields.
(lookup_dwo_unit_in_dwp): Renamed from lookup_dwo_in_dwp. Remove
arg "htab". All callers updated.
(create_debug_types_hash_table): Remove redundant copy of
abbrev_section.
(create_dwo_in_dwp): Tweak comments.
(read_str_index): Tweak comment. Record dwarf form name in static
local.
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (open_and_init_dwp_file): Try open_dwp_file also with
objfile->original_name.
gdb/testsuite/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.dwarf2/dwp-symlink.c: New file.
* gdb.dwarf2/dwp-symlink.exp: New file.
(queue_and_load_dwo_tu): New function.
(lookup_dwo_signatured_type): Set per_cu.tu_read.
(maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
Make dependent_cu optional.
(dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
and an older .gdb_index is in use, queue and load all its TUs too.
testsuite/
* gdb.base/enumval.c (ZERO): New enum value.
(main): Use it
* gdb.base/enumval.exp: Test ability to print ZERO.
gdb/
2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
* cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
variable search_flags.
* defs.h (OPF_DISABLE_REALPATH): Rename to ...
(OPF_RETURN_REALPATH): ... here.
* dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
* exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
call. Twice.
* nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
openp call.
* solib.c (solib_find): Likewise. Four times.
* source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
in the function comment and for the realpath_fptr variable.
(source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
(find_and_open_source): Likewise. Twice.
* symfile.c (symfile_bfd_open): Likewise, also twice.
(pending_macros): Ditto.
(get_macro_table): New function.
(buildsym_init): Initialize subfile_stack.
* coffread.c (type_vector,type_vector_length): Moved here from
buildsym.h.
(INITIAL_TYPE_VECTOR_LENGTH): Ditto.
(coff_symtab_read): Use it.
* dbxread.c (read_ofile_symtab): Delete init of subfile_stack.
* dwarf2read.c (macro_start_file): Replace uses of pending_macros
with call to get_macro_table.
* stabsread.c (type_vector,type_vector_length): Moved here from
buildsym.h.
(INITIAL_TYPE_VECTOR_LENGTH): Ditto.
* buildsym.h (get_macro_table): Declare.
This fixes some derivation.exp regressions with "dwz -m".
The bug here is that the imported PU is given language_minimal.
However, it ought to be C++.
The "pretend language" machinery exists to solve this problem, but it
wasn't handled in process_psymtab_comp_unit. So, this patch adds it
there.
Built and regtested, both normally and using "dwz -m", on x86-64
Fedora 18.
PR symtab/15028:
* dwarf2read.c (struct process_psymtab_comp_unit_data): New.
(process_psymtab_comp_unit_reader): Use it.
(process_psymtab_comp_unit): Update. Add "pretend_language"
argument.
(dwarf2_build_psymtabs_hard): Update.
(scan_partial_symbols): Pass CU's language to
process_psymtab_comp_unit.
After the previous patch in the series, nothing uses the "quick"
method find_symbol_file.
This patch removes it.
Tested by rebuilding.
* dwarf2read.c (dw2_get_primary_filename_reader): Remove.
(dwarf2_gdb_index_functions): Update.
* psymtab.c (find_symbol_file_from_partial): Remove.
(psym_functions): Update.
* symfile.h (struct quick_symbol_functions) <find_symbol_file>:
Remove.
Doug pointed out a while ago that in the final dwz -m patch, nothing
ever set symtab::user.
This patch fixes this oversight and adds a test case showing why it is
important.
Built and regtested (both ways) on x86-64 Fedora 18.
The new test unconditionally tests the partial unit machinery, which I
think is an added plus.
* dwarf2read.c (recursively_compute_inclusions): Add
"immediate_parent" argument. Set symtab's "user" field
if not set.
(compute_symtab_includes): Update.
* gdb.dwarf2/dwz.exp: New file.
* dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read.
(fill_in_sig_entry_from_dwo_entry): Reorganize asserts.
Add assert of sig_entry->dwo_unit == NULL.
(lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU
had already been read.
(read_signatured_type): Set per_cu.tu_read.
testsuite/
* gdb.dwarf2/fission-mix.exp: New file.
* gdb.dwarf2/fission-mix.h: New file.
* gdb.dwarf2/fission-mix.c: New file.
* gdb.dwarf2/fission-mix2.c: New file.
* dwarf2read.c (recursively_compute_inclusions): Change type of result
parameter to VEC (symtab_ptr) **. New parameter all_type_symtabs.
Watch for duplicate symtabs coming from type units.
(compute_symtab_includes): Update call to
recursively_compute_inclusions. Build vector of included symtabs
instead of per_cus.
* symtab.h (symtab_ptr): New typedef.
(DEF_VEC_P (symtab_ptr)): New VEC type.
* linespec.c (symtab_p): Delete. All uses updated to use symtab_ptr
instead.