* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint. Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.
(stepping_past_breakpoint_ptid): Likewise.
(prepare_to_proceed): Add STEP parameter. Do not check for Ctrl-C.
Only switch threads if we need to single-step over a breakpoint hit
in the previously selected thread. If stepping, remember previous
thread to switch back to in STEPPING_PAST_BREAKPOINT[_PTID]. Call
switch_to_thread instead of copying its contents.
(proceed): Pass STEP to prepare_to_proceed. Always set ONEPROC if
prepare_to_proceed returns true.
(init_wait_for_inferior): Reset STEPPING_PAST_BREAKPOINT.
(context_switch): Call switch_to_thread.
(handle_inferior_event): Switch back to previous thread if requested
in STEPPING_PAST_BREAKPOINT[_PTID] by prepare_to_proceed.
* gdbthread.h (switch_to_thread): Add prototype.
* thread.c (switch_to_thread): Make global.
* thread.c (make_cleanup_restore_current_thread): New function.
(info_threads_command): Use of make_cleanup_restore_current_thread
to restore the current thread and the selected frame.
(restore_selected_frame): New function.
(struct current_thread_cleanup): Add frame_id field.
(do_restore_current_thread_cleanup): Add restoring of the selected
frame.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): backup the selected frame while
entering the function and restore it at exit.
(thread_apply_command): Likewise.
* infrun.c (struct execution_control_state): Delete field
"stepping_through_sigtramp".
(init_execution_control_state): Do not set same.
(context_switch): Do not pass same to save_infrun_state and
load_infrun_state.
* gdbthread.h (struct thread_info): Delete field
stepping_through_sigtramp.
(save_infrun_state, load_infrun_state): Delete parameter
stepping_through_sigtramp.
* thread.c (load_infrun_state, save_infrun_state): Update.
patch committed by Elena Zannoni <ezannoni@redhat.com>
* thread.c (do_captured_list_thread_ids): Call prune_threads and
target_find_new_threads. Fix for PR mi/669.
* gdbthread.h (struct thread_info): Add new fields:
current_line, current_symtab, step_sp, for saved infrun state.
* thread.c (save_infrun_state, load_infrun_state): Save and
restore current_line, current_symtab, and step_sp.
(add_thread): Rather than adding assignments to initialize
the new fields, just use memset (tp, 0, sizeof (*tp).
This way future new fields will not be overlooked.
* infrun.c (handle_inferior_event): Save and restore save_sp,
current_line, and current_symtab when switching threads.
* thread.c (delete_step_resume_breakpoint): New function.
Maintain internal consistency of the thread list while deleting
a step_resume_breakpoint.
* gdbthread.h (delete_step_resume_breakpoint): Export.
* breakpoint.c (bpstat_find_step_resume_breakpoint):
Make thread-aware: don't return a step_resume_breakpoint
for the wrong thread.
* infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
instead of delete_breakpoint_current_contents.
(fetch_inferior_event): Ditto.
(handle_inferior_event): Call delete_step_resume_breakpoint
instead of delete_breakpoint.
called from wait_for_inferior. Instead, if a new thread-id is
detected, call add_thread. (MAGIC_NULL_PID): new macro, use
instead of the magic number "42000". (remote_find_new_threads):
if inferior_pid is unknown, get and use the current thread id.
(remote_start_remote): on connecting, attempt to get the current
thread id for inferior_pid. (remote_resume): If pid == -1,
then resume any-thread (not the current thread specifically).
* thread.c (info_threads_command): don't initialize current_pid
until after call to FIND_NEW_THREADS (which may change inferior_pid).
multithread debugging.
(remote_get_threadlist) : get a partial list of threads
(remote_threadlist_iterator) : Step through all the threads
(init_remote_threadtests) : Optional builtin unit test commands.
* thread.c (bind_target_thread_vector) : Implementa a more dynamic
way of accessing target specific thread info functions than
FIND_NEW_THREADS.
(target_thread_info) : Function to get extended thread information.
* gdbthread.h : Export internal data structures corresponding to
external detailed thread info response. This is more like a 'ps'
command than what might be expected of host based threads. This
is for embedded systems.
* defs.h: Move _initialize_printcmd, _initialize_stack,
_initialize_blockframe out of here and in to their respective .c files.
* blockframe.c: Move _initialize_blockframe prototype to here.
* printcmd.c: Move _initialize_printcmd prototype to here.
* stack.c: Move _initialize_stack prototype to here.
* source.c, symtab.h: Move _initialize_source prototype to the .c file.
* values.c, value.h: Move _initialize_values prototype to the .c file.
* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
file.
* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
to the .c file.
* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
Standardize comments for the prototype section of these files.
* configure.in: Look in libc for wctype before looking for it in libc.
The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem
where an empty stub library (libw) causes a core dump when we call vasprintf
(e.g. `info br') in the final linked gdb.
* blockframe.c (find_pc_sect_partial_function): Add braces to avoid
possible nested-if confusion.
* breakpoint.c (breakpoint_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
* gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
* gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability
prototypes.
* symtab.h: Add prototype for _initialize_source.
* value.h: Add prototype for _initialize_value.
* defs.h: Include sys/types.h or stddef.h to get size_t.
(make_cleanup): Add make_cleanup_func typedef and switch to using
a prototype for this function.
(mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
using mmalloc.
* ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c
dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c
infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c:
Cast parameters passed to make_cleanup to use the new
make_cleanup_func typedef.
More warning cleanups. There are still a bunch of places where the first
argument to make_cleanup is not cast to (make_cleanup_func); these are
either due to the function fitting the make_cleanup_func specification
already (e.g. free()) or they are in files that weren't compiled when
I did my make on a Linux native system. Bwahahaha. You can see them
like this:
grep make_cleanup\ * | grep -v make_cleanup_func
I'll surely go back and clean up the remaining suspicious calls in
GDB one of these days. :-)
* procfs.c (init_procinfo): new function, abstracts some code
shared by create_procinfo and do_attach;
(procfs_set_inferior_syscall_traps): new function, abstracts
some code needed by procfs_init_inferior, do_attach, and
procfs_lwp_creation_handler; (procfs_first_available): new
function, find any LWP that's runnable; (procfs_thread_alive):
replace stub function with real implementation;
(procfs_lwp_creation_handler): fix bug starting new child
threads; (info_proc): bug fixes and enhancements for the
"INFO PROCESSES" command; (close_procinfo_file): call new
function "delete_thread" to cleanup GDB's thread database;
(proc_init_failed): add new argument "kill", to control whether
process is killed (so this function can be shared by
create_procinfo and do_attach); (procfs_exit_handler): handle
exit from an attached process, and cleanup procinfo handles
when the process exits; (procfs_resume, procfs_wait): cleanup
after a thread when it exits; (do_attach, do_detach): handle
attached processes with multiple threads; plus some general
improvements in the diagnostic output.
* sol-thread.c (sol_thread_alive): replace stub with real
implementation; (thread_to_lwp, lwp_to_thread): enhance to
handle threads that may have exited; (sol_thread_attach): add
startup setup stuff; (sol_thread_detach): add unpush_target
call; (sol_thread_mourn_inferior): add unpush_target call;
(sol_thread_wait, sol_thread_resume): enhance to deal with
thread exit cleanly; (sol_thread_new_objfile,
sol_thread_pid_to_str): detect unsuccessful startup and
don't crash; plus some general cleanup.
* thread.c (delete_thread): new function, allows targets to
notify gdb when a thread is no longer valid.
* infrun.c (wait_for_inferior): don't try to detect a new
thread on receiving a TARGET_EXITED event.
* Finalize merge from Hurd folk.
Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
* thread.c (thread_apply_command, thread_apply_all_command,
thread_command): Make sure TP is alive.
(thread_alive): New function.
Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
* infrun.c (sig_print_info): Deal better with long signal names.
Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
* thread.c (thread_id_to_pid): New function.
Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
* gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
set_thread_default_cmd_list, show_thread_default_cmd_list):
New variables. (set_thread_cmd, show_thread_cmd,
set_thread_default_cmd, show_thread_default_cmd): New functions.
Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
* gnu-nat.c (inf_startup): remove TASK parameter.
(inf_set_task): replace with new function (inf_set_pid).
* gdbthread.h: Add extern decl for thread_cmd_list.
* Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
* config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
satisfy symbol dependancy in solib.c (core_ops).
* target.[ch] conditionalize Mach-specific signals so that they
won't show up in non-Mach gdb's!
* thread.c: add function thread_id_to_pid; change name of static
function "thread_switch" to "switch_to_thread", to avoid conflict
with Mach global symbol; move thread_cmd_list to global scope
so targets can add their own thread commands.
* infrun.c: sig_print_info: allow for long signal names.
* gnu-nat.[ch]: tidying up comments.
* gnu-nat.c: move several functions to static scope, just for tidy;
remove calls to prune_threads and renumber_threads;
gnu_wait must not return -1 when inferior exits;
attach_to_child will modify inferior_pid in a way that allows
fork_inferior to remain unchanged;
remove extra arg from startup_inferior;
move mach-specific thread commands here from thread.c.
infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
avoid conflict with Solaris /usr/include/thread.h.
another, save infrun's state for the old thread and load infrun's
previous state for the new thread.
* thread.c (struct thread_info): Add new fields for thread specific
state saved/restored in infrun.c.
(add_thread): Initialize new fields.
(load_infrun_state): New function.
(save_infrun_state): New function.
* thread.h (load_infrun_state): Provide external decl.
(save_infrun_state): Likewise.
More single-stepping patches for lynx-6100.
match stubs and protocol spec.
* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
when passing to function which expects that.
The following changes aren't quite enough to make things work with
LynxOS (apprently kernel problems).
* infrun.c (wait_for_inferior): When resuming new thread, pass pid
not -1 for remote case.
* thread.c (info_threads_command): Give error if !target_has_stack.
* infrun.c (start_remote): Call init_thread_list.
* thread.c (info_threads_command): Don't call kill for remote
debugging target.
* target.c (normal_pid_to_str): Print "thread" not "process" for
remote.
* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
response, and `thread' part of 'T' response.
* gdbserver/*: If program exits, send packet to GDB before
exiting. Handle termination with a signal the same as exiting
with an exitstatus.
* remote.c: Don't try to kill program after getting an 'X'
response.
* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* thread.c: Include "gdbcmd.h" and <ctype.h>.
* Makefile.in: Update dependency.
* thread.c (thread_command): Remove unused variable p.
* values.c (unpack_double): Use len instead of TYPE_LENGTH (type).
* valprint.c (print_floating): Correctly check sign bit now that
we are using unsigned arithmetic.
* symtab.c (find_pc_line_range): Remove unused variables exact_match,
ind, and l.
macro to set process groups.
* infptrace.c (child_resume): Temporarily use Lynx PIDGET to
specify resumption of all threads.
* infrun.c (wait_for_inferior): Fix handling of thread-specific
breakpoints for systems where DECR_PC_AFTER_BREAK > 0 (ie: backup
PC by the right amount when continuing the thread).
* thread.c (thread_apply_command): Add the `thread apply'
command to apply a given GDB command to a list of threads.
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
Pedro Alves