11c68c4748
* thread.c (_initialize_thread): Don't use commas and periods in
...
first line of doc string of "set/show print thread-events".
2008-05-09 08:14:47 +00:00
611c83ae47
gdb/
...
* breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
and bp_longjmp_resume breakpoints.
(breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
meaningful.
(create_longjmp_breakpoint): Don't create bp_longjmp_resume
breakpoints. Create bp_longjmp breakpoints as momentary
breakpoints.
(enable_longjmp_breakpoint): Delete.
(set_longjmp_breakpoint): New.
(disable_longjmp_breakpoint): Delete.
(delete_longjmp_breakpoint): New.
(set_longjmp_resume_breakpoint): Delete.
(set_momentary_breakpoint_at_pc): New.
(breakpoint_re_set_one): Don't delete bp_longjmp and
bp_longjmp_resume breakpoints.
(breakpoint_re_set): Don't create longjmp and longjmp-resume
breakpoints.
* infrun.c (step_resume_breakpoint): Add comment.
(struct execution_control_state): Delete handling_longjmp member.
(init_execution_control_state). Don't clear handling_longjmp.
(context_switch): Don't context switch handling_longjmp.
(handle_inferior_event): If handling a bp_longjmp breakpoint,
create a bp_longjmp_resume breakpoint, and set it as current
step_resume_breakpoint, then step over the longjmp breakpoint. If
handling a bp_longjmp_resume breakpoint, don't delete the longjmp
breakpoint, delete the longjmp-resume breakpoint, and stop
stepping.
(currently_stepping): Remove handling_longjmp from expression.
(insert_step_resume_breakpoint_at_sal): Update comment.
(insert_longjmp_resume_breakpoint): New.
* breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
(enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
declarations.
(set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
(set_longjmp_resume_breakpoint): Delete declaration.
* gdbthread.h (save_infrun_state): Remove handling_longjmp
parameter.
(load_infrun_state): Delete *handling_longjmp parameter.
* thread.c (save_infrun_state): Remove handling_longjmp parameter.
Update body.
(load_infrun_state): Delete *handling_longjmp parameter. Update
body.
* infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
(delete_longjmp_breakpoint_cleanup): New.
(step_1): Call set_longjmp_breakpoint instead of
enable_longjmp_breakpoint. Use delete_longjmp_breakpoint_cleanup
instead of disable_longjmp_breakpoint_cleanup when making cleanup.
(step_1_continuation): Pass thread id in the continuation args to
step_once.
(step_once): Add thread parameter. Pass thread id the the
continuation.
gdb/testsuite/
* gdb.cp/annota2.exp: Adjust to breakpoints invalidations at
different times.
2008-05-04 19:39:00 +00:00
063bfe2e12
2008-05-03 Pedro Alves <pedro@codesourcery.com>
...
* thread.c (delete_thread): Call observer_notify_thread_exit.
* mi/mi-interp.c (mi_interpreter_init): Register mi_thread_exit as
thread_exit observer.
(mi_thread_exit): New.
2008-05-03 15:10:42 +00:00
cfc0146143
* thread.c (add_thread): Move observer call to ...
...
(add_thread_silent): ... here.
2008-05-01 14:27:39 +00:00
6208b47d6c
* thread.c (make_cleanup_restore_current_thread): Make it
...
globally visible.
* gdbthread.h (make_cleanup_restore_current_thread): Declare.
* varobj.c (varobj_update): Don't save/restore frame.
(c_value_of_root): Save/restore thread and frame here,
using make_cleanup_restore_current_thread.
* Makefile.in: Update dependecies.
2008-03-23 09:53:52 +00:00
17faa917e0
2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
...
* gdbthread.h (add_thread_with_info): New.
* linux-thread-db.c: Add some documentation.
(GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
(struct private_thread_info): Remove th_valid and ti_valid.
Replace ti with tid.
(thread_get_info_callback): Do not add TID to the new ptid. Do
not cache th or ti.
(thread_db_map_id2thr, lwp_from_thread): Delete functions.
(thread_from_lwp): Assert that the LWP is set. Do not add TID to the
new PTID.
(attach_thread): Handle an already-existing thread. Use
add_thread_with_info. Cache the th and tid.
(detach_thread): Verify that private was set. Remove verbose
argument and printing. Update caller.
(thread_db_detach): Do not adjust inferior_ptid.
(clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
(check_event, find_new_threads_callback): Do not add TID to the new PTID.
(thread_db_wait): Do not use lwp_from_thread.
(thread_db_pid_to_str): Use the cached TID.
(thread_db_extra_thread_info): Check that private is set.
(same_ptid_callback): Delete.
(thread_db_get_thread_local_address): Do not use it or check
is_thread. Check that private is set. Assume that the thread
handle is already cached.
(init_thread_db_ops): Remove to_resume and to_kill.
* thread.c (add_thread_with_info): New.
(add_thread): Use it.
* linux-nat.c (find_thread_from_lwp): Delete.
(exit_lwp): Do not use it. Check print_thread_events. Print before
deleting the thread.
(GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
* linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
* inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
printf_unfiltered for thread exits.
* procfs.c (procfs_wait): Likewise.
2008-03-21 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/fork-child-threads.exp: Test next over fork.
2008-03-21 15:44:53 +00:00
0bcd3e2056
* thread.c (print_thread_info): Don't insist
...
on having current thread if there are no
threads at all.
2008-03-17 18:41:29 +00:00
8e8901c5c2
Implement -thread-info.
...
* gdbthread.h (print_thread_info): Declare.
* thread.c (print_thread_info): New, extracted
from info_threads_command and adjusted to
work for CLI and MI.
(info_threads_command): Use print_thread_info.
* Makefile.in: Update dependencies.
* mi/mi-cmds.c (mi_cmds): Specify a handler
for -thread-info.
* mi/mi-cmds.h (mi_cmd_thread_info): Declare.
* mi/mi-main.c (mi_cmd_thread_info): New.
(mi_cmd_list_features): Include 'thread-info'.
2008-03-15 13:53:25 +00:00
683f2885af
Implement MI notification for new threads.
...
* doc/observer.texi (new_thread): Document.
* observer.sh: Forward declare struct thread_info.
* thread.c (add_thread): Notify observer.
* interps.h (interp_init_ftype): New parameter
top_level.
(interp_set): Likewise.
(top_level_interpreter_data): Declare.
* interps.c (interp_set): New parameter top_level.
Pass it to interpreter's init function. Remember
top level interpreter.
(interpreter_exec_cmd): Adjust.
(top_level_interpreter_data): New.
* main.c (captured_main): Pass 1 for top_level
parameter of interp_set.
* cli/cli-interp.c (cli_interpreter_init): New
parameter top_level.
* tui/tui-interp.c (tui_init): New parameter top_level.
* mi/mi-interp.c (mi_new_thread): New.
(mi_interpreter_init): If top level, register
observer for new threads.
* Makefile.in (mi-interp.o, thread.o): Update dependencies.
2008-03-14 17:21:08 +00:00
fd532e2e9e
* thread.c (add_thread): Use printf_unfiltered to print.
2008-03-12 22:10:55 +00:00
93815fbfa5
Inform about new thread in a single place.
...
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
2008-01-23 11:26:29 +00:00
9b254dd1ce
Updated copyright notices for most files.
2008-01-01 22:53:26 +00:00
ca67fcb81a
Clarify infrun variable naming.
...
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint. Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.
2007-12-06 12:57:51 +00:00
4d8453a549
* thread.c (free_thread): Do not delete the step resume breakpoint
...
right away.
2007-09-10 21:27:23 +00:00
6a6b96b9c2
* infrun.c (stepping_past_breakpoint): New global variable.
...
(stepping_past_breakpoint_ptid): Likewise.
(prepare_to_proceed): Add STEP parameter. Do not check for Ctrl-C.
Only switch threads if we need to single-step over a breakpoint hit
in the previously selected thread. If stepping, remember previous
thread to switch back to in STEPPING_PAST_BREAKPOINT[_PTID]. Call
switch_to_thread instead of copying its contents.
(proceed): Pass STEP to prepare_to_proceed. Always set ONEPROC if
prepare_to_proceed returns true.
(init_wait_for_inferior): Reset STEPPING_PAST_BREAKPOINT.
(context_switch): Call switch_to_thread.
(handle_inferior_event): Switch back to previous thread if requested
in STEPPING_PAST_BREAKPOINT[_PTID] by prepare_to_proceed.
* gdbthread.h (switch_to_thread): Add prototype.
* thread.c (switch_to_thread): Make global.
2007-09-10 18:49:26 +00:00
a9762ec78a
Switch the license of all .c files to GPLv3.
...
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
b0b13bb4cc
* breakpoint.c (gdb_breakpoint_query): Really return an
...
enum gdb_rc.
(gdb_breakpoint): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(do_captured_thread_select): Likewise.
* mi/mi-main.c (mi_cmd_thread_select): Expect an enum gdb_rc.
(mi_cmd_thread_list_ids): Remove bogus initialization.
2007-04-10 14:53:46 +00:00
8807d78bec
* Makefile.in (SFILES): Remove nlmread.c.
...
(COMMON_OBS): Remove nlmread.o.
(nlmread.o): Delete rule.
* README: Delete reference to remote-st.c.
* acinclude.m4 (CY_AC_TCL_LYNX_POSIX): Delete.
* defs.h (enum gdb_osabi): Delete GDB_OSABI_NETWARE and
GDB_OSABI_LYNXOS.
* i386-tdep.c (i386_nw_init_abi, i386_nlm_osabi_sniffer): Delete.
(_initialize_i386_tdep): Do not reference them.
* nlmread.c: Delete file.
* osabi.c (gdb_osabi_names): Remove NetWare and LynxOS.
* target.c: Doc update.
* thread.c: Delete commented include.
* config/alpha/tm-alpha.h: Doc update.
* gdb.texinfo (Startup): Delete references to some alternate
names for .gdbinit.
(Thread): Remove LynxOS reference.
(Tandem ST2000): Delete target-specific documentation.
* gdbint.texinfo (Symbol Handling): Remove mention of NLM.
(Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
and GDB_OSABI_LYNXOS.
* config/netware.exp: Delete file.
2007-03-30 12:57:44 +00:00
35f196d907
* frame.c (frame_pop, frame_observer_target_changed): Call
...
reinit_frame_cache.
(flush_cached_frames): Rename to reinit_frame_cache and delete
old implementation.
* frame.h (flush_cached_frames): Delete prototype and update comment.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Call
reinit_frame_cache instead of flush_cached_frames. Do not call
select_frame after reinit_frame_cache.
* corelow.c (core_open): Likewise.
* gdbarch.sh (deprecated_current_gdbarch_select_hack): Likewise.
* infrun.c (prepare_to_proceed, context_switch)
(handle_inferior_event): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* ocd.c (ocd_start_remote): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (device): Likewise.
* thread.c (switch_to_thread): Likewise.
* tracepoint.c (finish_tfind_command): Likewise.
* gdbarch.c: Regenerated.
2007-02-28 17:35:01 +00:00
99b3d57478
2007-02-02 Denis Pilat <denis.pilat@st.com>
...
* thread.c (make_cleanup_restore_current_thread): New function.
(info_threads_command): Use of make_cleanup_restore_current_thread
to restore the current thread and the selected frame.
(restore_selected_frame): New function.
(struct current_thread_cleanup): Add frame_id field.
(do_restore_current_thread_cleanup): Add restoring of the selected
frame.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): backup the selected frame while
entering the function and restore it at exit.
(thread_apply_command): Likewise.
2007-02-02 12:18:37 +00:00
6aba47ca06
Copyright updates for 2007.
2007-01-09 17:59:20 +00:00
197e01b6dc
* breakpoint.c:
...
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
2005-12-17 22:34:03 +00:00
ad21ceb022
2005-11-14 Andrew Stubbs <andrew.stubbs@st.com>
...
* thread.c (_initialize_thread): Correct the 'thread apply' help
message.
2005-11-14 17:03:25 +00:00
1bedd21517
2005-02-15 Andrew Cagney <cagney@gnu.org>
...
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
2005-02-15 15:49:28 +00:00
1a966eabdf
2005-02-14 Andrew Cagney <cagney@gnu.org>
...
Mark up add_cmd.
* arch-utils.c, avr-tdep.c, breakpoint.c, corefile.c: Update.
* cp-abi.c, cp-namespace.c, cp-support.c, dummy-frame.c: Update.
* exec.c, gnu-nat.c, go32-nat.c, hppa-tdep.c, infcmd.c: Update.
* infrun.c, interps.c, macrocmd.c, maint.c, memattr.c: Update.
* mips-tdep.c, ocd.c, osabi.c, printcmd.c, regcache.c: Update.
* reggroups.c, remote-fileio.c, remote-rdi.c, remote.c: Update.
* sol-thread.c, source.c, stack.c, symfile-mem.c: Update.
* symfile.c, thread.c, tracepoint.c, valprint.c, value.c: Update.
* win32-nat.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-regs.c: Update.
2005-02-14 18:10:11 +00:00
a3f171870f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up some of printf_filtered and printf_unfiltered.
* ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update.
* corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update.
* demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update.
* event-loop.c, event-top.c, exec.c, f-valprint.c: Update.
* gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update.
* mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update.
* ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update.
* remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update.
* stack.c, symfile.c, symmisc.c, target.c, thread.c: Update.
* top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update.
* cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update.
* tui/tui-regs.c, tui/tui-win.c: Update.
2005-02-12 00:39:24 +00:00
8a3fe4f86c
2005-02-10 Andrew Cagney <cagney@gnu.org>
...
Mark up all error and warning messages.
* ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update.
* bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update.
* core-aout.c, core-regset.c, corefile.c, corelow.c: Update.
* cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update.
* dbxread.c, demangle.c, doublest.c, dsrec.c: Update.
* dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update.
* event-top.c, exec.c, expprint.c, f-lang.c: Update.
* f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update.
* frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update.
* gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update.
* hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update.
* hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update.
* hpread.c, hpux-thread.c, i386-linux-nat.c: Update.
* i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update.
* ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update.
* kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update.
* m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update.
* m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update.
* maint.c, mdebugread.c, mem-break.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update.
* nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update.
* observer.c, ocd.c, p-lang.c, p-typeprint.c: Update.
* p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update.
* ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update.
* remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update.
* remote-rdp.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote-utils.h, remote.c: Update.
* rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update.
* ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update.
* sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update.
* solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update.
* solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update.
* somread.c, somsolib.c, source.c, stabsread.c: Update.
* stack.c, std-regs.c, symfile-mem.c, symfile.c: Update.
* symmisc.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update.
* uw-thread.c, valarith.c, valops.c, valprint.c: Update.
* value.c, varobj.c, version.in, win32-nat.c, wince.c: Update.
* xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update.
* cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update.
* mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update.
* mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update.
* mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update.
* tui/tui-win.c: Update.
2005-02-11 04:06:14 +00:00
1c3c7ee7fb
2005-01-14 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (catch_exceptions): Delete errstring parameter.
(catch_exceptions_with_msg): Ditto.
* exceptions.c (catch_exceptions_with_msg): Update.
(catch_exceptions): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* frame.c (get_current_frame): Update.
* wrapper.c (gdb_value_struct_elt): Update.
* exceptions.c (catch_exceptions): Update.
* thread.c (gdb_list_thread_ids, gdb_thread_select): Update.
* breakpoint.c (gdb_breakpoint_query, gdb_breakpoint): Update.
* remote-fileio.c (remote_fileio_request): Update.
2005-01-14 23:27:14 +00:00
ce43223b29
2005-01-13 Andrew Cagney <cagney@gnu.org>
...
* breakpoint.c (gdb_breakpoint_query): Update, use
catch_exceptions_with_msg.
(do_captured_breakpoint): Add uiout parameter.
(gdb_breakpoint): Update, use catch_exceptions_with_msg.
* mi/mi-main.c (mi_cmd_thread_select): Pass mi_error_message to
gdb_thread_select. Return MI_CMD_ERROR instead of
MI_CMD_CAUGHT_ERROR.
(mi_cmd_thread_list_ids): Ditto for gdb_list_thread_ids.
(enum captured_mi_execute_command_actions): Delete
EXECUTE_COMMAND_DISPLAY_ERROR.
(captured_mi_execute_command): Delete code handling
MI_CMD_CAUGHT_ERROR.
(mi_execute_command): Don't check for
EXECUTE_COMMAND_DISPLAY_ERROR.
* mi/mi-cmd-break.c (breakpoint_notify): Update call to
gdb_breakpoint_query.
(mi_cmd_break_insert): Pass mi_error_message to gdb_breakpoint.
* mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_CAUGHT_ERROR.
* gdb.h (gdb_thread_select, gdb_list_thread_ids)
(gdb_breakpoint, gdb_breakpoint_query): Add error_message
parameter.
* thread.c (thread_command): Update call.
(gdb_thread_select, gdb_list_thread_ids): Update, call
catch_exceptions_with_msg.
2005-01-13 22:08:27 +00:00
60250e8b18
2005-01-12 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (enum return_reason, RETURN_MASK)
(RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL)
(return_mask, throw_exception, catch_exceptions_ftype)
(catch_exceptions_with_msg, catch_errors_ftype, catch_errors)
(catch_command_errors_ftype, catch_command_errors): Move to
exceptions.h.
* exceptions.c, exceptions.h: New files.
* top.c: Do not include <setjmp.h>.
(SIGJMP_BUF, SIGSETJMP, SIGLONGJMP, catch_return)
(throw_exception, catcher, catch_exceptions)
(catch_exceptions_with_msg, struct catch_errors_args)
(do_catch_errors, catch_errors, struct captured_command_args)
(do_captured_command, catch_command_errors): Move to exceptions.c.
* wrapper.c, wince.c, win32-nat.c, utils.c: Include "exceptions.h".
* tui/tui-interp.c, top.c, thread.c, symmisc.c: Ditto.
* symfile-mem.c, stack.c, solib.c, rs6000-nat.c: Ditto.
* remote-sds.c, remote-mips.c, remote-fileio.c: Ditto.
* remote-e7000.c, objc-lang.c, ocd.c: Ditto.
* remote.c, nto-procfs.c, monitor.c, mi/mi-main.c: Ditto.
* main.c, m32r-rom.c, infrun.c, inf-loop.c: Ditto.
* hppa-hpux-tdep.c, frame.c, event-top.c, event-loop.c: Ditto.
* corelow.c, corefile.c, cli/cli-interp.c, breakpoint.c: Ditto.
* ada-valprint.c, ada-lang.c: Ditto.
* Makefile.in (HFILES_NO_SRCDIR, COMMON_OBS): Add exceptions.h and
exceptions.o. Update all dependencies.
2005-01-12 18:31:35 +00:00
b04f3ab417
2004-10-29 Andrew Cagney <cagney@gnu.org>
...
* frame.h (get_selected_frame): Add message parameter.
* frame.c (get_selected_frame): Add and use message parameter.
* stack.c (current_frame_command, return_command, locals_info)
(catch_info, args_info, up_silently_base, down_silently_base): Use
get_selected_frame with an explicit message.
* thread.c, stack.c, sh-tdep.c, sh64-tdep.c: Update.
* remote-rdp.c, remote-mips.c, remote-e7000.c: Update.
* ocd.c, mi/mi-main.c, mi/mi-cmd-stack.c: Update.
* infrun.c, inflow.c, infcmd.c, frame.c: Update.
* findvar.c, eval.c, corelow.c, bsd-kvm.c: Update.
* breakpoint.c: Update.
2004-10-29 20:23:17 +00:00
629a41eeae
2004-08-25 Andrew Cagney <cagney@gnu.org>
...
* infrun.c (struct execution_control_state): Delete field
"stepping_through_sigtramp".
(init_execution_control_state): Do not set same.
(context_switch): Do not pass same to save_infrun_state and
load_infrun_state.
* gdbthread.h (struct thread_info): Delete field
stepping_through_sigtramp.
(save_infrun_state, load_infrun_state): Delete parameter
stepping_through_sigtramp.
* thread.c (load_infrun_state, save_infrun_state): Update.
2004-08-25 15:18:05 +00:00
007d08bb90
2004-05-24 Randolph Chung <tausq@debian.org>
...
* thread.c (info_threads_command, thread_apply_all_command)
(thread_apply_command, thread_command, do_captured_thread_select):
Remove HPUXHPPA-specific code.
2004-05-25 03:59:29 +00:00
f2c9ca0856
2004-05-12 Andrew Cagney <cagney@redhat.com>
...
* thread.c (load_infrun_state): Delete step_sp.
* infrun.c (context_switch): Ditto.
* inferior.h (step_sp): Ditto.
* infcmd.c (step_sp, step_1, step_once, until_next_command): Ditto.
* gdbthread.h (struct thread_info, save_infrun_state)
(restore_infrun_state): Ditto.
2004-05-12 22:19:02 +00:00
1596060827
2004-05-10 Andrew Cagney <cagney@redhat.com>
...
* infrun.c (through_sigtramp_breakpoint): Delete variable.
(context_switch): Do not switch through_sigtramp_breakpoint.
* gdbthread.h (save_infrun_state, load_infrun_state)
(struct thread_info): Delete through_sigtramp_breakpoint parameter
and structure member.
* thread.c (load_infrun_state, save_infrun_state): Update.
2004-05-10 23:27:49 +00:00
7789d0fa82
2004-05-01 Andrew Cagney <cagney@redhat.com>
...
* breakpoint.c (insert_bp_location): Use get_frame_id, and
frame_find_by_id instead of frame_relative_level.
(do_enable_breakpoint): Ditto.
* thread.c: Update copyright.
(info_threads_command): Ditto, simplify.
2004-05-02 00:21:41 +00:00
0faf007628
2004-04-28 Andrew Cagney <cagney@redhat.com>
...
* stack.c (print_stack_frame_stub): Delete declaration.
(struct print_stack_frame_args, print_stack_frame)
(print_frame_info, print_frame): Replace "source" with print what.
Replace "print" with "print_level". Replace "args" with
"print_args".
* frame.h (show_and_print_stack_frame, print_stack_frame)
(print_frame_info): Update declarations.
* stack.c (select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Update calls -
use get_selected_frame, pass "enum print_what" for source, do not
call frame_relative_level.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Ditto.
* remote-rdp.c (remote_rdp_open): Ditto.
* remote-mips.c (common_open): Ditto.
* remote-e7000.c (e7000_start_remote): Ditto.
* ocd.c (ocd_start_remote): Ditto.
* mi/mi-main.c (mi_cmd_exec_return): Ditto.
* infrun.c (normal_stop): Ditto.
* inflow.c (kill_command): Ditto.
* infcmd.c (finish_command): Ditto.
* corelow.c (core_open): Ditto.
* tracepoint.c (finish_tfind_command): Ditto.
* thread.c (info_threads_command, info_threads_command)
(restore_current_thread, do_captured_thread_select): Ditto.
* ada-tasks.c (task_command): Ditto.
2004-04-28 16:36:25 +00:00
db7429406e
* thread.c (info_threads_command): Use get_selected_frame ().
...
Check that there is at least one non-sentinel frame.
2003-07-28 13:02:12 +00:00
0ce3d317be
2003-05-04 Andrew Cagney <cagney@redhat.com>
...
* gdbthread.h (save_infrun_state): Drop prev_func_name parameter.
(load_infrun_state): Ditto.
(struct thread_info): Drop "prev_func_name" field.
* thread.c (load_infrun_state): Update.
(save_infrun_state): Update.
* infrun.c (prev_func_name): Delete variable.
(init_wait_for_inferior): Do not clear prev_func_name.
(stop_stepping, keep_going, context_switch): Do not swap
prev_func_name.
(handle_inferior_event, check_sigtramp2): Use pc_in_sigtramp
instead of PC_IN_SIGTRAMP.
2003-05-05 00:27:08 +00:00
167ef8b184
2003-04-12 Andrew Cagney <cagney@redhat.com>
...
* gdbthread.h (save_infrun_state): Delete parameter
"prev_func_start".
(struct thread_info): Delete field "prev_func_start".
(load_infrun_state): Ditto.
* thread.c (load_infrun_state, save_infrun_state): Update.
* infrun.c (prev_func_start): Delete variable.
(context_switch, init_wait_for_inferior): Update.
(stop_stepping, keep_going): Update.
2003-04-12 17:48:55 +00:00
6949171e13
2003-03-28 Jeff Johnston <jjohnstn@redhat.com>
...
* thread.c: Reindented.
* lin-lwp.c: Ditto.
* linux-proc.c: Ditto.
2003-03-28 21:42:41 +00:00
3b31d625f3
2003-02-02 Elena Zannoni <ezannoni@redhat.com>
...
Fix PR gdb/742 gdb/743
* disasm.c (dump_insns): Use make_cleanup_ui_out_tuple_begin_end.
(do_mixed_source_and_assembly): Use
make_cleanup_ui_out_tuple_begin_end and
make_cleanup_ui_out_tuple_begin_end.
(do_mixed_source_and_assembly): Ditto.
* thread.c (do_captured_list_thread_ids): Ditto.
* ui-out.h (ui_out_table_begin, ui_out_list_begin,
ui_out_tuple_begin, ui_out_table_end, ui_out_list_end,
ui_out_tuple_end): Delete prototypes.
* ui-out.c (ui_out_list_begin, ui_out_tuple_begin,
ui_out_list_end, ui_out_tuple_end): Delete.
From Kevin Buettner <kevinb@redhat.com>:
* ui-out.h (make_cleanup_ui_out_table_begin_end): New function.
* ui-out.c (make_cleanup_ui_out_table_begin_end)
(do_cleanup_table_end): New functions.
* breakpoint.c (print_it_typical, print_one_breakpoint, mention):
Use cleanups to invoke_ui_out_tuple_end().
(breakpoint_1): Use cleanup to invoke ui_out_table_end().
* cli/cli-setshow.c (cmd_show_list): Use
make_cleanup_ui_out_tuple_begin_end.
2003-02-03 01:18:37 +00:00
7789c6f56a
2003-01-13 Elena Zannoni <ezannoni@redhat.com>
...
* stack.c (print_frame_info, print_stack_frame_base_stub,
print_stack_frame_base, show_and_print_stack_frame_stub,
show_and_print_stack_frame, print_only_stack_frame_stub,
print_only_stack_frame): Delete functions.
(print_stack_frame_stub): Call print_frame_info instead of
print_frame_info_base.
(print_frame_info_base): Rename to print_frame_info.
(backtrace_command_1): Call print_frame_info, instead of
print_frame_info_base.
(current_frame_command): Call print_stack_frame, instead of
print_only_stack_frame.
(frame_command): Call print_stack_frame, instead of
show_and_print_stack_frame.
(up_command): Ditto.
(down_command): Ditto.
* frame.h (print_only_stack_frame): Delete prototype.
* infrun.c (normal_stop): Call print_stack_frame, instead of
show_and_print_stack_frame.
* thread.c (info_threads_command): Call print_stack_frame, instead
of print_only_stack_frame.
2003-01-13 Elena Zannoni <ezannoni@redhat.com>
* mi-main.c (mi_cmd_exec_return): Use print_stack_frame instead of
show_and_print_stack_frame.
2003-01-14 00:07:43 +00:00
7990a5784c
2002-12-19 Keith Seitz <keiths@redhat.com>
...
patch committed by Elena Zannoni <ezannoni@redhat.com>
* thread.c (do_captured_list_thread_ids): Call prune_threads and
target_find_new_threads. Fix for PR mi/669.
2002-12-20 03:37:33 +00:00
aa0cd9c15b
2002-12-05 Andrew Cagney <ac131313@redhat.com>
...
* gdbthread.h: Include "frame.h".
(struct thread_info): Replace step_frame_address with
step_frame_id.
* inferior.h: Include "frame.h".
(step_frame_id): Replace external variable step_frame_address.
* gdbthread.h (save_infrun_state): Replace step_frame_address
parameter with step_frame_id parameter.
(load_infrun_state): Ditto.
* Makefile.in (gdbthread_h, inferior_h): Add $(frame_h).
* infcmd.c (step_frame_id, step_1, step_once): Update.
* thread.c (load_infrun_state, save_infrun_state): Update.
* infrun.c (clear_proceed_status, save_inferior_status): Update.
(handle_inferior_event, step_over_function): Update.
(normal_stop, context_switch, restore_inferior_status): Update.
(struct inferior_status): Replace step_frame_address with
step_frame_id.
2002-12-06 07:35:55 +00:00
6e7f8b9cba
2002-11-29 Andrew Cagney <ac131313@redhat.com>
...
* stack.c (selected_frame, select_frame): Move from here ...
* frame.c (selected_frame, select_frame): ... to here. Include
"language.h".
* Makefile.in (frame.o): Update dependencies.
* frame.c (get_selected_frame): New function.
* frame.h (get_selected_frame): Declare.
(deprecated_selected_frame): Rename selected_frame.
* ada-lang.c, ada-tasks.c, breakpoint.c, corelow.c: Update.
* eval.c, f-valprint.c, findvar.c, frame.c, frame.h: Update.
* h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, infcmd.c: Update.
* inflow.c, infrun.c, macroscope.c, mips-tdep.c: Update.
* mn10300-tdep.c, ocd.c, regcache.h, remote-e7000.c: Update.
* remote-mips.c, remote-rdp.c, sh-tdep.c, sparc-tdep.c: Update.
* stack.c, thread.c, tracepoint.c, valops.c, varobj.c: Update.
* z8k-tdep.c, cli/cli-cmds.c: Update.
Index: mi/ChangeLog
2002-11-29 Andrew Cagney <ac131313@redhat.com>
* mi/mi-cmd-stack.c, mi/mi-main.c: Update to use
deprecated_selected_frame.
Index: tui/ChangeLog
2002-11-29 Andrew Cagney <ac131313@redhat.com>
* tui/tui-hooks.c: Update to use deprecated_selected_frame.
* tui/tui.c, tui/tuiDisassem.c, tui/tuiRegs.c: Ditto.
* tui/tuiSource.c, tui/tuiSourceWin.c, tui/tuiWin.c: Ditto.
2002-11-29 19:15:16 +00:00
b66d6d2e12
Fri Aug 2 15:53:50 2002 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh: Include "gdb_string.h".
* gdbarch.c: Regenerate.
* regcache.c: Include "gdb_string.h".
* ax-general.c: Ditto.
* varobj.c: Ditto.
* std-regs.c: Ditto.
* fbsd-proc.c: Ditto.
* thread.c: Ditto.
* Makefile.in (regcache.o): Update dependencies.
(thread.o, gdbarch.o): Ditto.
(ax-general.o, gdbarch.o): Ditto.
(varobj.o, std-regs.o): Ditto.
(fbsd-proc.o): Specify dependencies.
2002-08-02 20:51:21 +00:00
0f7d239c5a
* frame.h (select_frame): Delete level parameter.
...
* stack.c (select_frame): Update. Use frame_relative_level to
obtain the frame's level.
(select_and_print_frame): Update call.
(select_frame_command): Ditto.
(up_silently_base): Ditto.
(down_silently_base): Ditto.
* ocd.c (ocd_start_remote): Ditto.
* remote-rdp.c (remote_rdp_open): Ditto.
* remote-mips.c (mips_initialize): Ditto.
(common_open): Ditto.
* remote-e7000.c (e7000_start_remote): Ditto.
* m3-nat.c (select_thread): Ditto.
* hppa-tdep.c (child_get_current_exception_event): Ditto.
(child_get_current_exception_event): Ditto.
* varobj.c (varobj_create): Ditto.
(varobj_update): Ditto.
(c_value_of_root): Ditto.
* tracepoint.c (finish_tfind_command): Ditto.
* corelow.c (core_open): Ditto.
* arch-utils.c (generic_prepare_to_proceed): Ditto.
* thread.c (info_threads_command): Ditto.
(switch_to_thread): Ditto.
* infrun.c (normal_stop): Ditto.
(restore_selected_frame): Ditto.
(restore_inferior_status): Ditto.
* breakpoint.c (insert_breakpoints): Ditto.
(watchpoint_check): Ditto.
(bpstat_stop_status): Ditto.
(do_enable_breakpoint): Ditto.
* blockframe.c (flush_cached_frames): Ditto.
(reinit_frame_cache): Ditto.
2002-05-05 01:15:13 +00:00
b31da25ee5
* frame.h (selected_frame_level): Document as deprecated.
...
(frame_relative_level): Declare.
* stack.c (frame_relative_level): New function.
(selected_frame_level): Document as deprecated.
(select_frame): Do not set the selected_frame_level.
* stack.c (frame_info, record_selected_frame): Update.
(frame_command, current_frame_command): Update.
(up_silently_base, up_command, down_silently_base): Update.
(down_command): Update.
* inflow.c (kill_command): Update.
* tracepoint.c (finish_tfind_command): Update.
* corelow.c (core_open): Update.
* thread.c (info_threads_command): Update.
(do_captured_thread_select): Update.
* infcmd.c (finish_command): Update.
* breakpoint.c (insert_breakpoints, do_enable_breakpoint): Update.
2002-04-21 20:23:34 +00:00
8926118ce2
Remove else clause to #if UI_OUT.
2002-01-17 22:15:18 +00:00
Eli Zaretskii
Pedro Alves
Vladimir Prus
Daniel Jacobowitz
Ulrich Weigand
Joel Brobecker
Denis Pilat
Andrew Stubbs
Andrew Cagney
Randolph Chung
Jeff Johnston
Elena Zannoni