Andrew Burgess
039e3c2282
Replace most uses of deprecated_throw_reason with quit.
...
http://sourceware.org/ml/gdb-patches/2013-07/msg00778.html
gdb/ChangeLog
* monitor.c (monitor_interrupt_query): Replace use of
deprecated_throw_reason with quit.
* nto-procfs.c (interrupt_query): Likewise.
* remote-fileio.c (remote_fileio_sig_exit): Likewise.
* remote-mips.c (mips_kill): Likewise.
* remote.c (interrupt_query): Likewise.
2013-07-31 12:44:33 +00:00
Tom Tromey
7fdc15218d
remove pop_target
...
This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).
The first issue is that pop_target calls target_close. However, it
then calls unpush_target, which also calls target_close. This means
targets must be able to be closed twice. Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)
The second issue is that it seems to me that calling pop_target is
often unsafe. This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.
But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer. So, removing pop_target seemed like
an improvement.
Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.
Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.
PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target. Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.
2013-07-25 14:34:51 +00:00
Pedro Alves
12ff8552b9
-Wpointer-sign: monitor.c.
...
This fixes -Wpointer-sign issues in monitor.c.
Tested by building on x86_64 Fedora 17 w/ --enable-targets=all.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* monitor.c (monitor_write_memory, monitor_write_memory_bytes):
Change type of 'myaddr' parameter to gdb_byte pointer.
(monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
to 'long long' pointer instead of to 'unsigned long long'.
(monitor_write_memory_block, monitor_read_memory_single)
(monitor_read_memory): Change type of 'myaddr' parameter to
gdb_byte pointer.
2013-04-19 17:44:18 +00:00
Jan Kratochvil
460014f572
gdb/
...
Code cleanup.
* bfd-target.c (target_bfd_xclose): Remove parameter quitting.
* bsd-kvm.c (bsd_kvm_close): Likewise.
* bsd-uthread.c (bsd_uthread_close): Likewise.
* corelow.c (core_close): Likewise.
(core_close_cleanup): Remove parameter quitting from a caller.
* event-top.c (async_disconnect): Likewise.
* exec.c (exec_close_1): Remove parameter quitting.
* go32-nat.c (go32_close): Likewise.
* linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
parameter quitting from a caller.
* mips-linux-nat.c (super_close): Remove parameter quitting from the
variable.
(mips_linux_close): Remove parameter quitting. Remove parameter
quitting from a caller.
* monitor.c (monitor_close): Remove parameter quitting.
* monitor.h (monitor_close): Likewise.
* record-btrace.c (record_btrace_close): Likewise.
* record-full.c (record_full_close): Likewise.
* remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
it also from fprintf_unfiltered.
* remote-mips.c (mips_close): Remove parameter quitting.
(mips_detach): Remove parameter quitting from a caller.
* remote-sim.c (gdbsim_close): Remove parameter quitting.
(gdbsim_close): Remove duplicate function comment. Remove parameter
quitting and remove it also from printf_filtered.
* remote.c (remote_close): Remove parameter quitting.
* solib-svr4.c (enable_break): Remove parameter quitting from a caller.
* target.c (update_current_target): Remove parameter int from to_close
de_fault.
(push_target, unpush_target, pop_target): Remove parameter quitting from
a caller.
(pop_all_targets_above, pop_all_targets): Remove parameter quitting.
Remove parameter quitting from a caller.
(target_preopen): Remove parameter quitting from a caller.
(target_close): Remove parameter quitting. Remove parameter quitting
from a caller two times. Remove parameter quitting also from
fprintf_unfiltered.
* target.h (struct target_ops): Remove parameter quitting and as int
from fields to_xclose and to_close.
(extern struct target_ops current_target):
(target_close, pop_all_targets): Remove parameter quitting. Update the
comment.
(pop_all_targets_above): Remove parameter quitting.
* top.c (quit_target): Remove parameter quitting from a caller.
* tracepoint.c (tfile_close): Remove parameter quitting.
* windows-nat.c (windows_close): Remove parameter quitting.
2013-03-20 15:46:24 +00:00
Pedro Alves
61a672f17d
Garbage collect struct monitor_ops::load_routine.
...
While touching monitor_load in a previous patch, I noticed this method
is no longer set to anything other than NULL in the tree, so we can
remove it.
Tested by building with --enable-targets=all.
2013-02-19 Pedro Alves <palves@redhat.com>
Garbage collect 'struct monitor_ops'::load_routine.
* monitor.h (struct monitor_ops) <load_routine>: Remove field.
* monitor.c (monitor_load): No longer call
current_monitor->load_routine.
* dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
* m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
* ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
2013-02-19 19:41:28 +00:00
Pedro Alves
40e397df34
Harmonize this monitor_load with generic_load.
...
Harmonize this old-looking code with generic_load, which fixes several
issues.
2013-02-19 Pedro Alves <palves@redhat.com>
PR gdb/15161
Harmonize with generic_load.
* monitor.c: Include "readline/readline.h".
(monitor_load): Rename parameter 'file' to 'args'. Use build_argv
instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
long/strtol for the 'load_offset' local. Error out if no argument
is given or if too many arguments are given. Tilde expand the
passed in file name.
2013-02-19 19:27:21 +00:00
Joel Brobecker
28e7fd6234
Update years in copyright notice for the GDB files.
...
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2013-01-01 06:33:28 +00:00
Tom Tromey
f5656eadf4
* gdbarch.sh (target_gdbarch): Remove macro.
...
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
2012-11-09 19:58:03 +00:00
Tom Tromey
522002f96c
* defs.h (quit_flag): Don't declare.
...
(clear_quit_flag, check_quit_flag, set_quit_flag): Declare.
(QUIT): Use new functions.
* event-top.c (command_handler): Use clear_quit_flag.
(handle_sigint): Use set_quit_flag.
(async_request_quit): Use check_quit_flag. Don't check
immediate_quit.
* exceptions.c (throw_exception): Use clear_quit_flag.
* main.c (captured_main): Use clear_quit_flag.
* python/python.c (clear_quit_flag, set_quit_flag)
(check_quit_flag): New functions.
* remote-sim.c (gdb_os_poll_quit): Use check_quit_flag,
clear_quit_flag.
* remote.c (remote_wait_as): Use check_quit_flag,
clear_quit_flag.
(remote_start_remote): Call QUIT.
* symfile.c (load_progress): Use check_quit_flag.
* top.c (command_loop): Use clear_quit_flag.
(command_line_input): Call QUIT.
* utils.c (quit_flag): Conditionally define.
(clear_quit_flag, check_quit_flag, set_quit_flag): New
functions.
(prompt_for_continue): Call QUIT. Use quit, not
async_request_quit.
* remote-mips.c (mips_expect_timeout): Call QUIT.
* monitor.c (monitor_expect): Call QUIT.
2012-08-22 17:48:55 +00:00
Yao Qi
ccce17b060
gdb/
...
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* frame.c (frame_debug): Add 'unsigned'.
(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* frame.h: Update the declaration of 'frame_debug'.
* gdbtypes.c (overload_debug): Add 'unsigned'.
(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* inferior.h: Update declaration of 'debug_infrun'.
* infrun.c (debug_infrun): Add 'unsigned'.
(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* jit.c (jit_debug): Add 'unsigned'.
(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* linux-nat.c (debug_linux_nat): Add 'unsigned'.
(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* machoread.c (mach_o_debug_level): Add 'unsigned'.
(_initialize_machoread): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
intead of add_setshow_zinteger_cmd.
* mips-tdep.c (mips_debug): Add 'unsigned'.
(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* monitor.c (monitor_debug): Add 'unsigned'.
(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* observer.c (observer_debug): Add 'unsigned'.
(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* parse.c (expressiondebug): Add 'unsigned'.
(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.c (record_debug): Add 'unsigned'.
(_initialize_record): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.h: Update the declaration of 'record_debug'.
* stap-probe.c (stap_expression_debug): Add 'unsigned'.
(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* serial.c (global_serial_debug_p): Add 'unsigned'.
(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-frv.c (solib_frv_debug): Add 'unsigned'.
(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* target.c (targetdebug): Add 'unsigned'.
(initialize_targets): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* valops.c (overload_debug): Add 'unsigned'.
* varobj.c (varobjdebug): Add 'unsigned'.
(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* gdbarch.c, gdbarch.h: Re-generated.
2012-08-02 09:36:40 +00:00
Pedro Alves
a493e3e2e4
gdb/
...
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
* gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.
sim/arm/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/avr/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/cr16/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/d10v/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/erc32/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/m32c/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/ppc/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rl78/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rx/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
2012-05-24 16:51:47 +00:00
Pedro Alves
2ea286498f
gdb/
...
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
2012-05-24 16:39:15 +00:00
Joel Brobecker
0b30217134
Copyright year update in most files of the GDB Project.
...
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
2012-01-04 08:17:56 +00:00
Thiago Jung Bauermann
177b42fefa
gdb/
...
* ada-lang.c: Fix typos.
* amd64-tdep.c: Likewise.
* breakpoint.c: Likewise.
* cli/cli-decode.c: Likewise.
* findcmd.c: Likewise.
* inline-frame.c: Likewise.
* mi/mi-main.c: Likewise.
* minsyms.c: Likewise.
* monitor.c: Likewise.
* monitor.h: Likewise.
* prologue-value.c: Likewise.
* reverse.c: Likewise.
* s390-tdep.c: Likewise.
gdb/testsuite/
* gdb.base/call-sc.c: Likewise.
* gdb.base/ifelse.exp: Likewise.
* gdb.base/structs.c: Likewise.
gdb/doc/
* gdb.texinfo: Likewise.
2011-07-05 04:35:00 +00:00
Yao Qi
6e586cc565
2011-06-23 Yao Qi <yao@codesourcery.com>
...
* infrun.c (start_remote): Move call init_wait_for_inferior to ...
* remote.c (remote_start_remote): ... here.
* monitor.c (monitor_open): ... here.
2011-06-23 15:08:01 +00:00
Michael Snyder
025bb325db
2011-01-08 Michael Snyder <msnyder@vmware.com>
...
* m2-exp.y: Comment cleanup, mostly periods and spaces.
* m2-lang.c: Ditto.
* m2-typeprint.c: Ditto.
* m2-valprint.c: Ditto.
* m32c-tdep.c: Ditto.
* m32r-linux-nat.c: Ditto.
* m32r-rom.c: Ditto.
* m32r-tdep.c: Ditto.
* m32r-tdep.h: Ditto.
* m68hc11-tdep.c: Ditto.
* m58klinux-nat.c: Ditto.
* m68k-tdep.c: Ditto.
* m88k-tdep.c: Ditto.
* m88k-tdep.h: Ditto.
* machoread.c: Ditto.
* macrocmd.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* mdebugread.h: Ditto.
* memattr.c: Ditto.
* memattr.h: Ditto.
* memory-map.h: Ditto.
* mep-tdep.c: Ditto.
* microblaze-rom.c: Ditto.
* microblaze-tdep.c: Ditto.
* minsyms.c: Ditto.
* mips-irix-tdep.c: Ditto.
* mips-linux-nat.c: Ditto.
* mips-linux-tdep.c: Ditto.
* mips-linux-tdep.h: Ditto.
* mipsnbsd-nat.c: Ditto.
* mipsnbsd-tdep.c: Ditto.
* mipsread.c: Ditto.
* mips-tdep.c: Ditto.
* mips-tdep.h: Ditto.
* mn10300-linux-tdep.c: Ditto.
* mn10300-tdep.c: Ditto.
* mn10300-tdep.h: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* moxie-tdep.c: Ditto.
* moxie-tdep.h: Ditto.
* mt-tdep.c: Ditto.
2011-01-09 03:20:33 +00:00
Michael Snyder
3e43a32aaa
2011-01-05 Michael Snyder <msnyder@vmware.com>
...
* addrmap.c: Shorten lines of >= 80 columns.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* ax-gdb.c: Ditto.
* ax-general.c: Ditto.
* bcache.c: Ditto.
* blockframe.c: Ditto.
* breakpoint.c: Ditto.
* buildsym.c: Ditto.
* c-lang.c: Ditto.
* c-typeprint.c: Ditto.
* charset.c: Ditto.
* coffread.c: Ditto.
* command.h: Ditto.
* corelow.c: Ditto.
* cp-abi.c: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* defs.h: Ditto.
* dfp.c: Ditto.
* dfp.h: Ditto.
* dictionary.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* eval.c: Ditto.
* event-loop.c: Ditto.
* event-loop.h: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-lang.c: Ditto.
* f-valprint.c: Ditto.
* findcmd.c: Ditto.
* frame-base.c: Ditto.
* frame-unwind.c: Ditto.
* frame-unwind.h: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_dirent.h: Ditto.
* gdb_obstack.h: Ditto.
* gdbcore.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* inf-ttrace.c: Ditto.
* infcall.c: Ditto.
* infcmd.c: Ditto.
* inflow.c: Ditto.
* infrun.c: Ditto.
* inline-frame.h: Ditto.
* language.c: Ditto.
* language.h: Ditto.
* libunwind-frame.c: Ditto.
* libunwind-frame.h: Ditto.
* linespec.c: Ditto.
* linux-nat.c: Ditto.
* linux-nat.h: Ditto.
* linux-thread-db.c: Ditto.
* machoread.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* memattr.c: Ditto.
* minsyms.c: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* osabi.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* parse.c: Ditto.
* printcmd.c: Ditto.
* proc-events.c: Ditto.
* procfs.c: Ditto.
* progspace.c: Ditto.
* progspace.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote-fileio.c: Ditto.
* remote.c: Ditto.
* ser-mingw.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* solib-frv.c: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solib-target.c: Ditto.
* solib.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* stabsread.c: Ditto.
* stabsread.c: Ditto.
* stack.c: Ditto.
* stack.h: Ditto.
* symfile-mem.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target-descriptions.c: Ditto.
* target-memory.c: Ditto.
* target.c: Ditto.
* target.h: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* ui-file.c: Ditto.
* ui-file.h: Ditto.
* ui-out.h: Ditto.
* user-regs.c: Ditto.
* user-regs.h: Ditto.
* utils.c: Ditto.
* valarith.c: Ditto.
* valops.c: Ditto.
* valprint.c: Ditto.
* valprint.h: Ditto.
* value.c: Ditto.
* varobj.c: Ditto.
* varobj.h: Ditto.
* vec.h: Ditto.
* xcoffread.c: Ditto.
* xcoffsolib.c: Ditto.
* xcoffsolib.h: Ditto.
* xml-syscall.c: Ditto.
* xml-tdesc.c: Ditto.
2011-01-05 22:22:53 +00:00
Joel Brobecker
7b6bb8daac
run copyright.sh for 2011.
2011-01-01 15:34:07 +00:00
Pierre Muller
3329c4b5af
* hppa-tdep.c (unwind_command): Use host_address_to_string function
...
to display a host address.
* monitor.c (monitor_read_memory): Likewise.
* xtensa-tdep.c (xtensa_push_dummy_call): Likewise.
2010-09-10 16:17:14 +00:00
Pedro Alves
cce7e648b9
* breakpoint.c (update_watchpoint, _initialize_breakpoint): Remove
...
unnecessary space in string.
* filesystem.c (_initialize_filesystem): Ditto.
* frame.c (_initialize_frame): Ditto.
* infcmd.c (step_once): Ditto.
* infrun.c (_initialize_infrun): Ditto.
* linux-nat.c (linux_child_follow_fork): Ditto.
* maint.c (maintenance_deprecate): Ditto.
* memattr.c (_initialize_mem): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* monitor.c (monitor_open): Ditto.
* procfs.c (procfs_xfer_memory): Ditto.
* reverse.c (bookmarks_info): Ditto.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Ditto.
* stack.c (_initialize_stack): Ditto.
* tracepoint.c (_initialize_tracepoint): Ditto.
* xtensa-tdep.c (xtensa_supply_gregset,
xtensa_regset_from_core_section): Ditto.
2010-07-01 15:36:18 +00:00
Michael Snyder
b8d56208c5
2010-05-15 Michael Snyder <msnyder@vmware.com>
...
* m2-lang.c: White space.
* m2-valprint.c: White space.
* macrocmd.c: White space.
* macroexp.c: White space.
* macroscope.c: White space.
* macrotab.c: White space.
* main.c: White space.
* maint.c: White space.
* mdebugread.c: White space.
* memattr.c: White space.
* minsyms.c: White space.
* monitor.c: White space.
2010-05-16 00:18:02 +00:00
Jan Kratochvil
a0b31db1be
gdb/
...
* ada-lang.c (lim_warning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* amd64-tdep.c (amd64_insn_length_fprintf): Likewise.
* cli-out.c (cli_field_fmt): New ATTRIBUTE_PRINTF.
(cli_message, out_field_fmt): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* complaints.c (find_complaint): New ATTRIBUTE_PRINTF.
(vcomplaint): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* complaints.h (complaint, internal_complaint): Likewise.
* defs.h: Change ATTR_FORMAT to ATTRIBUTE_PRINTF in the top comment.
(ATTR_FORMAT): Remove.
(query, nquery, yquery, vprintf_filtered, vfprintf_filtered)
(fprintf_filtered, fprintfi_filtered, printf_filtered, printfi_filtered)
(vprintf_unfiltered, vfprintf_unfiltered, fprintf_unfiltered)
(printf_unfiltered, xasprintf, xvasprintf, xstrprintf, xstrvprintf)
(xsnprintf, verror, error, vfatal, fatal, internal_verror)
(internal_error, internal_vwarning, internal_warning, warning)
(vwarning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
* disasm.c (fprintf_disasm): Likewise.
* exceptions.c (throw_it): Likewise.
* exceptions.h (exception_fprintf, throw_verror, throw_vfatal)
(throw_error): Likewise.
* language.h (type_error, range_error): Likewise.
* linespec.c (cplusplus_error): Likewise.
* mi/mi-interp.c (mi_interp_query_hook): Likewise.
* mi/mi-out.c (mi_field_fmt, mi_message): Likewise.
* monitor.c (monitor_debug): Likewise.
* parser-defs.h (parser_fprintf): Likewise.
* serial.h (serial_printf): Likewise.
* tui/tui-hooks.c (tui_query_hook): Likewise.
* ui-out.c (default_field_fmt, default_message, uo_field_fmt)
(uo_message): Likewise.
* ui-out.h (ui_out_field_fmt, ui_out_message): Likewise.
* utils.c (vfprintf_maybe_filtered, internal_vproblem, defaulted_query):
Likewise.
* xml-support.h (gdb_xml_debug, gdb_xml_error): Likewise.
2010-05-02 21:14:59 +00:00
Joel Brobecker
4c38e0a4fc
Update copyright year in most headers.
...
Automatic update by copyright.sh.
2010-01-01 07:32:07 +00:00
Pedro Alves
6c95b8df7f
2009-10-19 Pedro Alves <pedro@codesourcery.com>
...
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 09:51:43 +00:00
Ulrich Weigand
e17a411335
* defs.h (extract_signed_integer, extract_unsigned_integer,
...
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter. Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
to store_unsigned_integer.
* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.
Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters. Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.
Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.
* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset. Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter. Pass to
charset_for_string_type. Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.
* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.
* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter. Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.
* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.
* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".
* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.
* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter. Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.
* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter. Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.
* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.
* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.
* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.
* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.
* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.
* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.
* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.
* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.
* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.
* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.
* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.
* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.
* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.
* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.
* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.
* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.
* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.
* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.
* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.
2009-07-02 17:25:59 +00:00
Ulrich Weigand
5af949e350
* defs.h (strlen_paddr, paddr, paddr_nz): Remove.
...
(paddress): Add GDBARCH parameter.
* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
use it instead of current_gdbarch.
Update calls to ui_out_field_core_addr to pass architecture:
* ada-lang.c (print_one_exception): Update.
* breakpoint.c (print_one_breakpoint_location,
print_one_exception_catchpoint): Update.
* disasm.c (dump_insns): Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* mi/mi-main.c (mi_cmd_data_read_memory): Update.
* mi/mi-symbol-cmds.c: Include "objfiles.h".
(mi_cmd_symbol_list_lines): Update.
* stack.c (print_frame_info, print_frame): Update.
Update callers of paddress to pass architecture:
* ada-tasks.c (info_task): Update.
* ada-valprint.c (ada_val_print_1): Update.
* annotate.c (annotate_source, annotate_frame_begin): Update.
* breakpoint.c (insert_bp_location, describe_other_breakpoints,
mention): Update.
* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
Update.
* corefile.c (memory_error): Update.
* c-valprint.c (print_function_pointer_address, c_val_print): Update.
* disasm.c (dis_asm_print_address): Update.
* exec.c (print_section_info): Update.
* f-valprint.c (f_val_print): Update.
* infcmd.c: Include "arch-utils.h".
(jump_command, program_info): Update.
* linux-fork.c: Include "arch-utils.h".
(info_forks_command): Update.
* m2-valprint.c (print_function_pointer_address,
print_unpacked_pointer, print_variable_at_address,
m2_val_print): Update.
* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
Update.
* printcmd.c (print_address, print_address_demangle, address_info):
Update.
* p-valprint.c (pascal_val_print): Update.
* source.c: Include "arch-utils.h".
(line_info): Update.
* stack.c (frame_info, print_block_frame_labels): Update.
* symfile.c (add_symbol_file_command, list_overlays_command): Update.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
print_symbol, print_partial_symbols, maintenance_info_psymtabs,
maintenance_check_symtabs): Update.
* symtab.c (find_pc_sect_symtab): Update.
* target.c (deprecated_debug_xfer_memory): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* valprint.c (val_print_string): Update.
Update callers of paddr_nz to use paddress instead (keeping
user-visible output identical):
* alpha-tdep.c (alpha_heuristic_proc_start): Update.
* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
amd64_displaced_step_fixup): Update.
* arch-utils.c (simple_displaced_step_copy_insn): Update.
* auxv.c (fprint_target_auxv): Update.
* breakpoint.c (insert_single_step_breakpoint): Update.
* buildsym.c (finish_block): Update.
* cli/cli-dump.c (restore_section_callback): Update.
* fbsd-nat.c (fbsd_find_memory_regions): Update.
* frame.c (frame_unwind_register_value): Update.
* gcore.c (gcore_create_callback): Update.
* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
i386_record_lea_modrm_addr, i386_record_lea_modrm,
i386_process_record): Update.
* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
* infrun.c (displaced_step_prepare, displaced_step_fixup,
handle_inferior_event, insert_step_resume_breakpoint_at_sal,
insert_longjmp_resume_breakpoint): Update.
* linux-nat.c (linux_nat_find_memory_regions): Update.
* linux-record.c (record_linux_system_call): Update.
* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
mips_o64_push_dummy_call): Update.
* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
* record.c (record_arch_list_add_mem, record_wait,
record_xfer_partial): Update.
* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
mips_common_breakpoint): Update.
* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
* solib-som.c (som_current_sos): Update.
* symfile.c (load_progress, generic_load): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* valops.c (value_fetch_lazy): Update.
* windows-tdep.c (windows_xfer_shared_library): Update.
Update callers of paddr_nz to use paddress instead (changing
user-visible output to make it more correct):
* dwarf2loc.c (locexpr_describe_location): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint,
ia64_memory_remove_breakpoint): Update.
* jv-valprint.c (java_value_print): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
* monitor.c (monitor_read_memory): Update.
Update callers of paddr to use paddress instead (changing
user-visible output to make it more correct):
* arm-tdep.c (arm_push_dummy_call): Update.
* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
create_breakpoint): Update.
* darwin-nat-info.c (darwin_debug_regions): Update.
* dcache.c (dcache_info): Update.
* dsrec.c (load_srec, make_srec): Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
dwarf2_frame_cache): Update.
* gcore.c (gcore_copy_callback): Update.
* gnu-nat.c (gnu_xfer_memory): Update.
* mips-linux-nat.c (mips_show_dr): Update.
* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Update.
* remote.c (compare_sections_command): Update.
* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
m32r_remove_breakpoint, m32r_insert_watchpoint,
m32r_remove_watchpoint): Update.
* sol-thread.c (info_cb): Update.
* symfile.c (load_progress): Update.
Update callers of paddress or paddr_nz to use hex_string instead
(changes output of internal/error/debug messages only):
* dwarf2read.c (dump_die_shallow): Update.
* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
get_frame_func, create_new_frame): Update.
* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
ia64_get_dyn_info_list): Update.
* maint.c (maintenance_translate_address): Update.
* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
* target.c (target_flash_erase): Update.
Update callers of paddr/paddr_nz to use phex/phex_nz instead,
using an appropriate address size. Remove use of strlen_paddr.
* exec.c (exec_files_info): Update.
* i386-nat.c (i386_show_dr): Update.
* remote.c (remote_flash_erase): Update.
* m32r-rom.c (m32r_load_section): Update.
* monitor.c (monitor_vsprintf, monitor_store_register): Update.
* remote.c (remote_check_symbols, remote_search_memory): Update.
* remote-mips.c (mips_request, mips_common_breakpoint): Update.
* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Update.
* xcoffsolib.c (sharedlibrary_command): Update.
* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
Use hex_string_custom instead of paddr.
(print_bfd_section_info): Pass address size.
(print_objfile_section_info): Likewise.
* annotate.h (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* annotate.c (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* source.c (identify_source_line): Update call to annotate_source.
* stack.c (print_frame_info, print_frame): Update call to
annotate_frame_begin.
* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
(create_breakpoint, create_ada_exception_breakpoint): Update call.
* stack.c (print_block_frame_labels): Add GDBARCH parameter.
(print_frame_label_vars): Update call.
* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
(dump_psymtab): Update call to print_partial_symbols.
(struct print_symbol_args): Add GDBARCH member.
(dump_symtab_1): Set print_symbol_args architecture member.
(print_symbol): Use it.
* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
parameter.
* windows-tdep.c (windows_xfer_shared_library): Likewise.
* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
(core_process_module_section): Pass architecture from cpms_data to
windows_xfer_shared_library.
(windows_core_xfer_shared_libraries): Initialize cmps_data
architecture member.
* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
to windows_xfer_shared_library.
* defs.h (print_address): Add GDBARCH parameter.
* printcmd.c (print_address): Add GDBARCH parameter.
(print_scalar_formatted, do_examine): Update call.
* findcmd.c (find_command): Update call.
* tracepoint.c: Include "arch-utils.h".
(trace_find_line_command): Update call.
* tui/tui-disasm.c (tui_disassemble): Update call.
* value.h (print_address_demangle): Add GDBARCH parameter.
* printcmd.c (print_address_demangle): Add GDBARCH parameter.
* c-valprint.c (print_function_pointer_address, c_val_print):
Update call.
* f-valprint.c (f_val_print): Update call.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
* jv-valprint.c (java_val_print): Update call.
* m2-valprint.c (print_function_pointer_address, m2_val_print):
Update call.
* p-valprint.c (pascal_val_print): Update call.
* disasm.c (gdb_disassemble_info): Install architecture into
di.application_data field.
testsuite/ChangeLog:
* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
change to prefix TLS offset in hex with 0x.
doc/ChangeLog:
* gdbint.texinfo (Item Output Functions): Update signature
for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
Ulrich Weigand
a6d9a66e23
* breakpoint.h (struct breakpoint): New member GDBARCH.
...
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
2009-07-02 17:12:28 +00:00
Ulrich Weigand
a97b0ac8cf
* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
...
of current_gdbarch.
* aix-thread.c (pd_enable): Likewise.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* bsd-uthread.c (bsd_uthread_activate): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
* nto-procfs.c (procfs_open): Likewise.
* procfs.c (invalidate_cache, procfs_insert_watchpoint,
info_proc_mappings, info_mappings_callback): Likewise.
* record.c (record_open): Likewise.
* rs6000-nat.c (ARCH64): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
(darwin_bfd_open): Likewise.
* memattr.c (mem_info_command): Likewise.
* windows-nat.c (win32_resume): Use current regcache architecture
instead of current_gdbarch.
* dbug-rom.c (dbug_regname): Remove check against number of
registers in current_gdbarch.
* solib-pa64.c (read_dynamic_info): Remove unused variable.
2009-06-17 18:44:23 +00:00
Pedro Alves
c35b149212
* target.h (struct target_ops): Make to_has_all_memory,
...
to_has_memory, to_has_stack, to_has_registers and to_has_execution
methods instead of variables.
(target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
(target_has_registers_1, target_has_execution_1): Declare
functions.
(target_has_all_memory): Rewrite to call target_has_all_memory_1.
(target_has_memory): Rewrite to call target_has_memory_1.
(target_has_stack): Rewrite to call target_has_all_stack_1.
(target_has_registers): Rewrite to call target_has_registers_1.
(target_has_execution): Rewrite to call target_has_execution_1.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Declare.
(target_mark_running, target_mark_exited): Delete declarations.
* target.c (default_child_has_all_memory,
default_child_has_memory, default_child_has_stack,
default_child_has_registers, default_child_has_execution): New.
(target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
target_has_registers_1, target_has_execution_1): New.
(add_target): Default the to_has_all_memory, to_has_all_memory,
to_has_memory, to_has_stack, to_has_registers and to_has_execution
callbacks to return 0.
(update_current_target): Do not inherit to_has_all_memory,
to_has_memory, to_has_stack, to_has_registers or to_has_execution.
(target_mark_running, target_mark_exited): Delete.
(memory_xfer_partial): Adjust.
(target_read_memory, target_write_memory, target_search_memory):
Dispatch to the the top-most target, not the flattened
current_target.
(target_info): Adjust.
(init_dummy_target): Install return_zero as callback for
to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
to_has_execution.
(set_maintenance_target_async_permitted): Use have_live_inferiors
instead of target_has_execution.
* target-memory.c (target_write_memory_blocks): Dispatch memory
writes to the the top-most target, not the flattened
current_target.
* breakpoint.c (insert_breakpoints): Don't check for
target_has_execution here.
(update_global_location_list): Check if there are live inferiors
to debug instead of target_has_execution.
* infcmd.c (kill_command, detach_command): Check if there are
inferiors instead of target_has_execution.
* inferior.h (have_live_inferiors): Declare.
* inferior.c (have_live_inferiors): New.
* infrun.c (normal_stop): Don't check for target_has_execution to
finish the thread states.
* thread.c (is_thread_state, is_stopped, is_exited, is_running)
(any_running, is_executing): Remove checks for
target_has_execution.
* top.c (kill_or_detach): Don't try to kill core inferiors.
(quit_target): Don't check for target_has_execution.
* corelow.c (core_has_memory, core_has_stack, core_has_registers):
New.
(init_core_ops): Install core_has_memory, core_has_stack and
core_has_registers.
* exec.c (exec_has_memory): New.
(init_exec_ops): Install exec_has_memory.
* remote.c (remote_add_inferior): Don't call target_mark_running.
(remote_start_remote): Don't call target_mark_exited or call
target_mark_running.
(remote_open_1): Use have_inferiors instead of
target_has_execution. Don't use target_mark_exited.
(init_remote_ops): Install deafult_child_has_all_memory,
default_child_has_memory, default_child_has_stack,
default_child_has_registers, default_child_has_execution.
* bsd-kvm.c (bsd_kvm_return_one): New.
(bsd_kvm_add_target): Register bsd_kvm_return_one as
to_has_memory, to_has_stack and to_has_registers callbacks.
* remote-m32r-sdi.c (m32r_return_one): New.
(init_m32r_ops): Register it.
* inf-child.c (inf_child_target): Adjust to register
default_child_has_all_memory, default_child_has_memory,
default_child_has_stack, default_child_has_registers,
default_child_has_execution callbacks.
* gnu-nat.c (init_gnu_ops): Likewise.
* go32-nat.c (init_go32_ops): Likewise.
* hpux-thread.c (init_hpux_thread_ops): Likewise.
* monitor.c (init_base_monitor_ops): Likewise.
* nto-procfs.c (init_procfs_ops): Likewise.
* remote-mips.c (_initialize_remote_mips): Likewise.
* windows-nat.c (init_windows_ops): Likewise.
* remote-sim.c (gdbsim_create_inferior): Don't use
target_mark_running or target_mark_exited.
(gdbsim_mourn_inferior): Don't call target_mark_exited.
(init_gdbsim_ops): Adjust to register
default_child_has_all_memory, default_child_has_memory,
default_child_has_stack, default_child_has_registers,
default_child_has_execution callbacks.
* linux-nat.c (linux_nat_xfer_partial): If reading memory, and
there's no inferior selected, defer to a lower stratum.
2009-06-07 16:46:48 +00:00
Pedro Alves
47608cb1ac
* target.h (TARGET_WNOHANG): New.
...
* target.c (target_wait): Add `options' argument. Adjust.
(struct target_ops) <to_wait>: Add `options' argument.
(target_wait): Add `options' argument.
* infrun.c (wait_for_inferior): Pass 0 as options to
target_wait (blocking wait).
(fetch_inferior_event): Pass TARGET_WNOHANG as options to
target_wait.
* fork-child.c (startup_inferior): Pass 0 as options to
target_wait (blocking wait).
* linux-nat.c (linux_nat_create_inferior): Remove async masking.
(linux_nat_wait_1): Add `target_options' argument. Use it instead
of checking on target_can_async_p.
(linux_nat_wait): Add `target_options' argument. Adjust.
* remote.c (remote_wait_ns): Add `options' argument. Adjust to
check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
(remote_wait_as): Add `options' argument. Adjust to check on
TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
a blocking wait, keep waiting until an interesting event comes
out.
(remote_wait): Add `options' argument. Don't loop here if the
target is in async mode, and a blocking wait has been requested.
* top.c (deprecated_target_wait_hook): Add `options' argument.
* linux-thread-db.c (thread_db_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
* record.c (record_beneath_to_wait): Add `options' argument.
(record_wait): Add `options' argument, and pass it down to the
layer beneath.
* bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
* darwin-nat.c (darwin_wait): Likewise.
* defs.h (deprecated_target_wait_hook): Likewise.
* gnu-nat.c (gnu_wait): Add `options' argument.
* go32-nat.c (go32_wait): Likewise.
* hpux-thread.c (hpux_thread_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
* monitor.c (monitor_wait): Likewise.
* nto-procfs.c (procfs_wait): Likewise.
* remote-mips.c (mips_wait): Add `options' argument.
* remote-sim.c (gdbsim_wait): Likewise.
* rs6000-nat.c (rs6000_wait): Add `options' argument.
* sol-thread.c (sol_thread_wait): Add `options' argument, and pass
it down to the layer beneath.
* spu-linux-nat.c (spu_child_wait): Add `options' argument.
* windows-nat.c (windows_wait): Likewise.
* tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
2009-05-21 15:48:42 +00:00
Ulrich Weigand
fb14de7bbd
* inferior.h (read_pc, write_pc): Remove.
...
* regcache.c (read_pc, write_pc): Remove.
* infrun.c (displaced_step_fixup): Use regcache_read_pc instead
of read_pc.
(handle_inferior_event): Use regcache_read_pc instead of read_pc
when determining value of stop_pc. Replace subsequent uses of
read_pc by inspecting already-retrieved stop_pc value.
(keep_going): Use regcache_read_pc instead of read_pc.
* breakpoint.c (watchpoint_check): Use current frame architecture
and PC instead of current_gdbarch and read_pc ().
* tracepoint.c (set_traceframe_context): Replace PC argument
with FRAME argument.
(trace_start_command, finish_tfind_command): Update calls.
(finish_tfind_command): Compare frame IDs to identify transitions
between frames.
(trace_find_pc_command): Use regcache_read_pc instead of read_pc.
* rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
of gdbarch. Use regcache_read_pc and regcache_write_pc instead
of read_pc and write_pc.
(store_register): Make regcache argument non-const. Update call
to exec_one_dummy_insn.
* thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
* infcmd.c (post_create_inferior): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
* solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
* solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
* record.c (record_wait): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote-mips.c (common_open, mips_wait): Likewise.
* remote-m32r-sdi.c (m32r_resume): Likewise.
* symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
* monitor.c (monitor_create_inferior, monitor_load): Likewise.
* m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
* remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
* remote-mips.c (mips_create_inferior, mips_load): Likewise.
* solib-darwin.c: Include "regcache.h".
* solib-pa64.c: Include "regcache.h".
* solib-svr4.c: Include "regcache.h.".
* symfile.c: Do not mention read_pc or write_pc in comments.
* dink32-rom.c: Likewise.
* m32r-rom.c: Likewise.
* mips-tdep.c: Likewise.
2009-05-05 13:24:49 +00:00
Joel Brobecker
7d85a9c0e3
Add a target_ops parameter to the to_kill method in struct target_ops.
...
* target.h (struct target_ops): Add a "target_ops *" parameter to
method to_kill.
(target_kill): Remove macro. Add declaration.
* target.c (debug_to_kill): Delete, no longer necessary.
(target_kill): New function.
(update_current_target): Stop inheriting the to_kill method.
Do not de_fault it to no_process either.
(setup_target_debug): Do not set current_target.to_kill.
* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
accordingly.
2009-03-17 19:28:09 +00:00
Hui Zhu
9e2f0ad4e0
2009-02-25 Hui Zhu <teawater@gmail.com>
...
* cli/cli-script.c (define_command): Add _() to query.
* gnu-nat.c (inf_validate_task_sc): Ditto.
* infcmd.c (kill_if_already_running): Ditto.
(jump_command): Ditto.
(attach_command): Ditto.
* inflow.c (kill_command): Ditto.
* infrun.c (handle_command): Ditto.
* maint.c (maintenance_dump_me): Ditto.
* memattr.c (mem_delete_command): Ditto.
* monitor.c (monitor_interrupt_query): Ditto.
* nto-procfs.c (interrupt_query): Ditto.
* printcmd.c (undisplay_command): Ditto.
* remote-mips.c (mips_kill): Ditto.
* remote.c (interrupt_query): Ditto.
* solib-irix.c (irix_open_symbol_file_object): Ditto.
* solib-osf.c (osf_open_symbol_file_object): Ditto.
* solib-pa64.c (pa64_open_symbol_file_object): Ditto.
* solib-som.c (som_open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
* target.c (kill_or_be_killed): Ditto.
* tracepoint.c (delete_trace_command): Ditto.
* top.c (quit_confirm): Add _() to s that will be used
in query.
2009-02-25 02:14:23 +00:00
Pedro Alves
28439f5ef7
* corelow.c (get_core_registers): Adjust.
...
(core_file_thread_alive): Rename to...
(core_thread_alive): ... this.
(core_pid_to_str): Try gdbarch_core_pid_to_str first.
(init_core_ops): Adjust.
(coreops_suppress_target): Delete.
(_initialize_corelow): Unconditionally add core_ops.
* procfs.c: Include "inf-child.h".
(procfs_ops): Delete.
(init_procfs_ops): Delete. Reimplement as...
(procfs_target): ... this, inheriting from inf-child.
(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
(procfs_prepare_to_store): Delete.
(procfs_store_registers, procfs_resume): Adjust.
(procfs_open): Delete.
(procfs_suppress_run): Delete.
(procfs_can_run): Delete.
(procfs_mourn_inferior): Adjust.
(procfs_init_inferior): Add target_ops parameter. Adjust.
(procfs_create_inferior): Don't pass procfs_init_inferior to
fork_inferior. Instead call it after fork_inferior returns.
(procfs_find_new_threads): Adjust.
(_initialize_procfs): Adjust to use procfs_target instead of
init_procfs_ops.
* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
(lwp_to_thread): Use target_thread_alive.
(sol_thread_open): Delete.
(sol_thread_attach): Delete.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
to use find_target_beneath.
(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
(sol_thread_xfer_partial): Adjust to use find_target_beneath.
(sol_thread_files_info, sol_thread_kill_inferior): Delete.
(check_for_thread_db): New.
(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
(sol_thread_new_objfile): Call check_for_thread_db.
(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
(sol_thread_can_run): Delete.
(sol_thread_alive): Adjust to use find_target_beneath.
(sol_thread_stop): Delete.
(rw_common): Use target_write_memory or target_read_memory.
(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
(solaris_pid_to_str): Remove check for libthread_db initialization
failing.
(sol_find_new_threads): Remove check for libthread_db
initialization failing, or for an invalid inferior_ptid. Adjust
to use find_target_beneath.
(sol_core_open, sol_core_close, sol_core_detach,
sol_core_files_info, sol_find_memory_regions,
sol_make_note_section, ignore): Delete.
(init_sol_thread_ops): Make it a thread_stratum target. Remove
unneeded callback settings.
(init_sol_core_ops): Delete.
(_initialize_sol_thread): No longer call init_sol_core_ops, set
procfs_suppress_run, or hack with core_ops.
* target.h (struct target_ops): Add a target_ops * parameter to
to_resume, to_fetch_registers, to_store_registers, to_thread_alive
and to_find_new_threads.
(target_fetch_registers, target_store_registers)
(target_thread_alive, target_find_new_threads): Redeclare as
function.
* target.c (update_current_target): Do not inherit or de_fault
to_resume, to_fetch_registers, to_store_registers,
to_thread_alive, to_find_new_threads.
(target_resume): Adjust.
(target_thread_alive, target_find_new_threads): New.
(debug_to_resume, debug_to_fetch_registers): Delete.
(target_fetch_registers): New.
(debug_to_store_registers): Delete.
(target_store_registers): New.
(debug_to_thread_alive, debug_to_find_new_threads): Delete.
(setup_target_debug): Adjust.
* gdbcore.h (core_ops): Delete declaration.
* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
* gdbarch.sh (core_pid_to_str): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* sol2-tdep.c: Include "inferior.h".
(sol2_core_pid_to_str): New.
* sol2-tdep.h (sol2_core_pid_to_str): Declare.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 00:03:50 +00:00
Pedro Alves
117de6a924
* linux-nat.c (linux_nat_wait): Adjust.
...
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2009-02-06 22:21:26 +00:00
Joel Brobecker
0fb0cc7590
Updated copyright notices for most files.
2009-01-03 05:58:08 +00:00
Jan Kratochvil
73e113d460
* monitor.c (monitor_insert_breakpoint): Remove unused variable `bp'.
2008-11-13 15:02:15 +00:00
Vladimir Prus
136d6dae62
Kill pthread_ops_hack
...
* target.h (struct target_ops): Make to_attach, to_detach,
to_create_inferior and to_mourn_inferior accept a pointer
to struct target_ops.
(target_attach, target_create_inferior, target_create_inferior):
Convert from macros to function. Find the right target to
invoke a method of.
(find_default_attach, find_default_create_inferior): New parameter
ops.
* corefile.c (core_file_command): Pass target to to_detach.
* corelow.c (core_detach): Add 'ops' parameter.
* fork-child.c (fork_inferior): Return the pid. Allow
init_trace_fun to be NULL.
* inf-ptrace (ptrace_ops_hack): Remove.
(inf_ptrace_him): Remove, moving all logic into....
(inf_ptrace_create_inferior): ... here. Push the target
passed as parameter.
(inf_ptrace_mourn_inferior, inf_ptrace_attach, inf_ptrace_detach):
Push/pop target passed as parameter, no ptrace_ops_hack.
(inf_ptrace_target): Don't remember result.
* inferior.h (fork_inferior): Adjust prototype.
* linux-nat.c (linux_nat_create_inferior, linux_nat_attach)
(linux_nat_detach, linux_nat_mourn_inferior): New parameter ops.
Pass it to linux_ops target.
* linux-thread-db.c (thread_db_detach, thread_db_mourn_inferior):
New parameter ops. Pass it to the target beneath.
* remote.c (remote_mourn, extended_remote_mourn, remote_detach)
(extended_remote_create_inferior): New parameter ops. Pass it
further.
* target.c (debug_to_attach, debug_to_detach)
(debug_to_mourn_inferior): New parameter ops.
(target_create_inferior): New.
(update_current_target): Do not inherit to_attach, to_detach,
to_create_inferiour, to_mourn_inferior. Do not default
to_detach and to_mourn_inferior.
(target_detach): Find the right target to use.
(target_mourn_inferior): New.
(find_default_attach, find_default_create_inferior): New parameter
ops. Pass the found target when calling its method.
(init_dummy_target): Provide fallback definition of to_detach.
(target_attach): New.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferiour): New parameter ops.
* aix-thread.c: Adjust.
* bsd-uthread.c: Adjust.
* gnu-nat.c: Adjust.
* go32-nat.c: Adjust.
* hpux-thread.c: Adjust.
* inf-ttrace.c: Ajust.
* monitor.c: Adjust.
* nto-procfs.c: Adjust.
* procfs.c: Adjust.
* remote-m32r-sdi.c: Adjust.
* remote-mips.c: Adjust.
* remote-sim.c: Adjust.
* rs6000-nat.c: Adjust.
* sol-thread.c: Adjust.
* win32-nat.c: Adjust.
* dec-thread.c: Adjust.
2008-11-09 11:27:18 +00:00
Pedro Alves
7f9f62ba18
* gnu-nat.c (gnu_attach): Add process to inferiors table.
...
(gnu_detach): Remove it.
* go32-nat.c (go32_create_inferior): Add process to gdb's inferior
table.
* inf-ptrace.c (inf_ptrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ptrace_attach): Add new process to inferior table.
(inf_ptrace_detach): Remove it.
* inf-ttrace.c (inf_ttrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ttrace_attach): Add process to inferior table.
(inf_ttrace_detach): Remove it.
* linux-fork.c (init_fork_list): Delete any left over inferior.
(linux_fork_mourn_inferior, detach_fork_command): Also delete
processes from inferior list.
* monitor.c (monitor_open): Add process to inferior list.
(monitor_close): Remove it.
* nto-procfs.c (procfs_attach): Add process to inferior list.
Find threads after pushing the target.
(procfs_detach): Remove process from inferior list.
(procfs_create_inferior): Add process to inferior list.
* procfs.c (procfs_detach): Remove process from inferior list.
(do_attach): Add process to inferior list.
* remote-sim.c (sim_create_inferior): Add process to inferior list.
(gdbsim_close): Remove it.
* target.c (generic_mourn_inferior): If inferior_ptid is not
null_ptid, remove the corresponding inferior from inferior list.
* win32-nat.c (do_initial_win32_stuff): Add process to inferior list.
(win32_detach): Remove it.
* linux-nat.c (linux_child_follow_fork): Delete and add inferiors
to inferior list accordingly.
* fork-child.c (fork_inferior): Add process to inferior list.
* corelow.c (CORELOW_PID): Define.
(core_close): Remove core from inferior list.
(core_open): Add it.
2008-09-22 15:16:51 +00:00
Pedro Alves
f9c72d524f
Adjust all targets to new target_stop interface.
...
* gnu-nat.c (gnu_stop): Add ptid argument.
* go32-nat.c (go32_stop): Add ptid argument.
(go32_create_inferior): Pass inferior_ptid to go32_stop.
* hpux-thread.c (hpux_thread_stop): Add ptid argument.
* monitor.c (monitor_stop): Add ptid argument.
(monitor_open): Pass inferior_ptid to monitor_stop.
(monitor_interrupt): Pass inferior_ptid to target_stop.
(monitor_stop): Add ptid argument.
* nto-procfs.c (nto_interrupt): Pass inferior_ptid to target_stop.
(procfs_create_inferior): Add ptid argument.
* procfs.c (procfs_stop): Add ptid argument.
* remote-m32r-sdi.c (m32r_stop): Add ptid argument.
* remote-sim.c (gdbsim_stop): Add ptid argument.
* sol-thread.c (sol_thread_stop): Add ptid argument.
* win32-nat.c (win32_stop): Add ptid argument.
2008-07-09 22:49:56 +00:00
Pedro Alves
5e0b29c16a
* monitor (monitor_ptid): New global.
...
(monitor_open): Silently add the main task to GDB's thread list.
(monitor_close, monitor_mourn_inferior): Silently delete the main
task from GDB's thread list.
(monitor_thread_alive, monitor_pid_to_str): New.
(init_base_monitor_ops): Register monitor_thread_alive and
monitor_pid_to_str.
(_initialize_remote_monitors): Initialize monitor_ptid.
* gdbthread.h (delete_thread_silent): Declare.
* thread.c (delete_thread): Rename to ...
(delete_thread_1): ... this. Add "silent" parameter. If silent,
don't do exit notifications.
(delete_thread, delete_thread_silent): New, as wrappers to
delete_thread_1.
2008-07-09 10:58:41 +00:00
Pedro Alves
c0a2216eb3
* infrun.c (start_remote): Don't clear thread list here.
...
* monitor.c (monitor_open): Include "gdbthread.h". Clear thread
list here.
* remote.c (record_currthread): Upgrade the main thread and its
entry in the thread list if this is the first time we hear about
threads.
(remote_thread_alive): Consider magic_null_ptid or a ptid without
a tid member always alive.
(remote_find_new_threads): Don't update the main thread here.
(remote_start_remote): Clear thread list here. Always add the
main thread.
(extended_remote_attach_1): Add the main thread here.
(extended_remote_mourn_1): Re-add the main thread here.
(extended_remote_create_inferior_1): Add a main thread.
* Makefile.in (monitor.o): Depend on $(gdbthread_h).
2008-06-27 11:54:21 +00:00
Daniel Jacobowitz
9b254dd1ce
Updated copyright notices for most files.
2008-01-01 22:53:26 +00:00
Maciej W. Rozycki
49d03eab05
* target.c (update_current_target): Inherit to_log_command.
...
* target.h (struct target_ops). Add to_log_command.
(target_log_command): New macro.
* top.c (execute_command): Call target_log_command() rather than
serial_log_command().
* monitor.c (init_base_monitor_ops): Initialize to_log_command.
* remote-m32r-sdi.c (init_m32r_ops): Likewise.
* remote-mips.c (_initialize_remote_mips): Likewise.
* remote.c (init_remote_ops): Likewise.
2007-12-07 15:02:12 +00:00
Ulrich Weigand
9b072297d8
2007-10-09 Markus Deuling <deuling@de.ibm.com>
...
* monitor.c (monitor_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
(monitor_store_register, monitor_store_registers): Likewise.
2007-10-09 18:17:31 +00:00
Joel Brobecker
a9762ec78a
Switch the license of all .c files to GPLv3.
...
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
Ulrich Weigand
594f77850b
* regcache.c (struct regcache): Add ptid_t member.
...
(regcache_xmalloc): Initialize it.
(regcache_cpy_no_passthrough): Do not refer to current_regcache.
(regcache_dup): Likewise.
(regcache_dup_no_passthrough): Likewise.
(current_regcache): Make static.
(registers_ptid): Remove variable.
(get_thread_regcache): New function.
(get_current_regcache): New function.
(registers_changed): Implement by freeing current regcache.
(regcache_raw_read): Do not refer to current_regcache. Set
inferior_ptid to regcache->ptid while calling target routines.
(regcache_raw_write): Likewise.
(regcache_raw_supply): Do not refer to current_regcache.
(read_pc_pid): Use thread regcache. Do not modify inferior_ptid.
(write_pc_pid): Likewise.
(build_regcache): Remove.
(_initialize_regcache): Do not call DEPRECATED_REGISTER_GDBARCH_SWAP
or deprecated_register_gdbarch_swap. Do not initialize
registers_ptid.
* regcache.h (get_current_regcache): Add prototype.
(get_thread_regcache): Likewise.
(current_regcache): Remove declaration.
* corelow.c (core_open): Replace current_regcache by
get_current_regcache ().
* frame.c (frame_pop): Likewise.
(put_frame_register): Likewise.
(get_current_frame, create_new_frame): Likewise.
* mi/mi-main.c (mi_cmd_data_write_register_values): Likewise.
* stack.c (return_command): Likewise.
* infcall.c (call_function_by_hand): Likewise.
* infrun.c (resume): Likewise.
(save_inferior_status, restore_inferior_status): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
(fork_save_infrun_state): Likewise.
* win32-nat.c (win32_resume): Likewise.
* i386fbsd-nat.c (i386fbsd_resume): Likewise.
* monitor.c (monitor_wait): Likewise.
* remote.c (remote_wait): Likewise.
* remote-mips.c (mips_wait): Likewise.
* bsd-kvm.c (bsd_kvm_open): Likewise
(bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Likewise.
* fbsd-nat.c (fbsd_make_corefile_notes): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_stopped_data_address): Likewise.
* frv-tdep.c (frv_fdpic_loadmap_addresses): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* mep-tdep.c (current_me_module, current_options): Likewise.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Likewise.
* linux-nat.c (linux_nat_do_thread_registers): Use thread
regcache instead of current_regcache. Call target_fetch_registers.
(linux_nat_corefile_thread_callback): Update call site.
(linux_nat_do_registers): Likewise.
* procfs.c (procfs_do_thread_registers): Use thread regcache instead
of current_regcache.
(procfs_make_note_section): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
2007-06-16 17:16:26 +00:00
Ulrich Weigand
bf6ae4641c
2007-06-09 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (ADDR_BITS_REMOVE): Replace by gdbarch_addr_bits_remove.
* value.c (value_as_address): Likewise (comment).
* remote-mips.c (common_breakpoint): Likewise.
* regcache.c (read_pc_pid): Likewise.
* printcmd.c (do_one_display): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory)
(monitor_insert_breakpoint): Likewise.
* mips-tdep.c (heuristic_proc_start): Likewise.
* infrun.c (insert_step_resume_breakpoint_at_frame)
(insert_step_resume_breakpoint_at_caller): Likewise.
* buildsym.c (record_line): Likewise.
* arm-tdep.c (arm_scan_prologue, thumb_get_next_pc)
(arm_get_next_pc): Likewise.
* armnbsd-nat.c (arm_supply_gregset, fetch_register, store_register)
(store_regs): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
* arm-linux-nat.c (fetch_register, fetch_regs): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-09 13:49:20 +00:00
Ulrich Weigand
f57d151a99
2007-05-31 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (NUM_REGS): Replace by gdbarch_num_regs.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_registers)
(inf_ptrace_store_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* i386-linux-nat.c (supply_gregset, fill_gregset)
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers): Likewise.
* remote.c (init_remote_state,packet_reg_from_regnum)
(packet_reg_from_pnum,process_g_packet,remote_fetch_registers)
(remote_prepare_to_store,store_registers_using_G)
(remote_store_registers,remote_arch_state): Likewise.
* tracepoint.c (encode_actions): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* tui/tui-regs.c (tui_show_register_group)
(tui_show_register_group): Likewise.
* xtensa-tdep.h (FP_ALIAS): Likewise.
* xtensa-tdep.c (xtensa_register_name,xtensa_register_type)
(xtensa_reg_to_regnum,xtensa_pseudo_register_read)
(xtensa_pseudo_register_write,xtensa_register_reggroup_p): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers)
(do_win32_store_inferior_registers,fetch_elf_core_registers
* user-regs.h: Likewise (comment).
* user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
* target-descriptions.h: Likewise (comment).
* target-descriptions.c (tdesc_use_registers): Likewise (comment).
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh64-tdep.c (sh64_do_pseudo_register,sh64_print_register)
(sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* rs6000-nat.c (fetch_register,store_register): Likewise.
* remote-sim.c (one2one_register_sim_regno,gdbsim_fetch_register)
(gdbsim_fetch_register,gdbsim_store_register): Likewise.
* remote-mips.c (mips_fetch_registers,mips_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers)
(m32r_store_registers): Likewise.
* reggroups.c (default_register_reggroup_p): Likewise.
* regcache.c (init_regcache_descr,register_size,regcache,regcache_save)
(regcache_restore,regcache_dump): Likewise.
* monitor.c (monitor_fetch_registers,monitor_store_registers): Likewise.
* mips-tdep.c (mips_xfer_register,mips_register_name)
(mips_register_reggroup_p,mips_pseudo_register_read)
(mips_pseudo_register_write,mips_convert_register_p,mips_register_type)
(mips_unwind_pc,mips_unwind_sp,mips_unwind_dummy_id,set_reg_offset)
(mips16_scan_prologue,mips_insn16_frame_cache,reset_saved_regs)
(mips32_scan_prologue,mips_insn32_frame_cache,read_next_frame_reg)
(mips_n32n64_return_value,mips_o32_return_value,mips_o64_return_value)
(print_gp_register_row,mips_print_registers_info)
(mips_stab_reg_to_regnum,mips_dwarf_dwarf2_ecoff_reg_to_regnum)
(mips_register_sim_regno): Likewise.
* mips-linux-tdep.c (mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Likewise.
* mips-linux-nat.c (mips_linux_register_addr)
(mips64_linux_register_addr): Likewise.
* findvar.c (value_of_register): Likewise.
* infcmd.c (default_print_registers_info,registers_info)
(print_vector_info,print_float_info): Likewise.
* mips64obsd-tdep.c (mips64obsd_sigframe_init): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache(: Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* ia64-linux-nat.c (ia64_register_addr,ia64_cannot_fetch_register)
(ia64_cannot_store_register,ia64_linux_fetch_registers)
(ia64_linux_store_registers): Likewise.
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Likewise.
* h8300-tdep.c (E_PSEUDO_CCR_REGNUM,E_PSEUDO_EXR_REGNUM)
(h8300_init_frame_cache,h8300_frame_cache,h8300_frame_prev_register)
(h8300_register_type): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache)
(dwarf2_frame_state_alloc_regs): Likewise.
* cris-tdep.c (cris_register_size,cris_cannot_fetch_register)
(cris_cannot_store_register,crisv32_cannot_fetch_register)
(crisv32_cannot_store_register,cris_register_name): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* arch-utils.c (legacy_register_sim_regno)
(legacy_virtual_frame_pointer): Likewise.
* arm-tdep.c (arm_make_prologue_cache,arm_register_sim_regno):Likewise.
* arm-tdep.h: Likewise (comment).
* frv-tdep.c (frv_register_sim_regno): Likewise.
* m68klinux-nat.c (old_fetch_inferior_registers)
(old_store_inferior_registers): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* irix5-nat.c (fetch_core_registers): Likewise.
* hppa-tdep.c (hppa_frame_cache): Likewise.
* hppa-linux-nat.c (hppa_linux_register_addr)
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_inferior_registers)
(hppa_hpux_store_inferior_registers): Likewise.
* amd64-nat.c (amd64_native_gregset_reg_offset)
(amd64_supply_native_gregset,amd64_collect_native_gregset): Likewise.
* dbug-rom.c (dbug_regname): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache)
(HARD_PAGE_REGNUM (comment)): Likewise.
* gdbarch.sh (NUM_PSEUDO_REGS): Replace by gdbarch_num_pseudo_regs.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
* tui/tui-regs.c (tui_show_register_group): Likewise.
* xtensa-tdep.h (FP_ALIAS): Likewise.
* user-regs.h: Likewise (comment).
* user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
* target-descriptions.h: Likewise (comment).
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh64-tdep.c (sh64_print_register,sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* regcache.c (init_regcache_descr,register_size,regcache,regcache_save
(regcache_restore,regcache_dump): Likewise.
* mips-tdep.c (print_gp_register_row,mips_print_registers_info)
(mips_dwarf_dwarf2_ecoff_reg_to_regnum)
(mips_stab_reg_to_regnum): Likewise.
* findvar.c (value_of_register): Likewise.
* infcmd.c (default_print_registers_info,registers_info)
(print_vector_info,print_float_info): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
* h8300-tdep.c (h8300_register_type): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Likewise.
* xtensa-tdep.c (xtensa_register_type,xtensa_reg_to_regnum)
(xtensa_pseudo_register_read,xtensa_pseudo_register_write): Likewise.
* parse.c: Remove comment.
* gdbarch.c, gdbarch.h: Regenerate
2007-05-31 17:32:22 +00:00
Ulrich Weigand
316f20603a
* target.h (struct target_ops): Add REGCACHE parameter to
...
to_prepare_to_store.
(target_prepare_to_store): Likewise.
* target.c (debug_to_prepare_to_store): Add REGCACHE parameter.
(update_current_target): Adapt prepare_to_store de_fault rule.
* regcache.c (regcache_raw_write): Pass regcache to
target_prepare_to_store.
* inftarg.c (child_prepare_to_store): Add REGCACHE parameter.
Do not call CHILD_PREPARE_TO_STORE.
* gnu-nat.c (gnu_prepare_to_store): Likewise.
* procfs.c (procfs_prepare_to_store): Likewise.
* inf-child.c (inf_child_prepare_to_store): Add REGCACHE parameter.
* go32-nat.c (go32_prepare_to_store): Likewise.
* monitor.c (monitor_prepare_to_store): Likewise.
* nto-procfs.c (procfs_prepare_to_store): Likewise.
* remote-m32r-sdi.c (m32r_prepare_to_store): Likewise.
* remote-mips.c (mips_prepare_to_store): Likewise.
* remote-sim.c (gdbsim_prepare_to_store): Likewise.
* win32-nat.c (win32_prepare_to_store): Likewise.
* remote.c (remote_prepare_to_store): Add REGCACHE parameter.
Use it instead of current_regcache.
* hpux-thread.c (hpux_thread_prepare_to_store): Add REGCACHE
parameter. Pass it on to next target.
* sol-thread.c (sol_thread_prepare_to_store): Likewise.
2007-05-06 18:55:41 +00:00