Pedro Alves
715f468029
gdb/
...
* Makefile.in (hpux-thread.o): Delete rule.
* configure.ac: Don't check for HPUX DCE threads support.
* configure, config.in: Regenerate.
* hppa-hpux-nat.c (child_suppress_run): Delete.
(hppa_hpux_child_can_run): Delete.
(_initialize_hppa_hpux_nat): Don't override to_can_run.
* hpux-thread.c: Delete.
2011-01-14 13:43:16 +00:00
Joel Brobecker
449444484c
Update the copyright year for most remaining files in GDB
2011-01-05 05:09:55 +00:00
Joel Brobecker
043b651001
build failure on IRIX when building with Python support.
...
This is a nasty interaction between Python and GDB. Basically,
Python causes some macros to be unilaterally defined in order
to turns some features on:
/* Define to activate features from IEEE Stds 1003.1-2001 */
#define _POSIX_C_SOURCE 200112L
/* Define to the level of X/Open that your system supports */
#define _XOPEN_SOURCE 600
But the problem is that they turn off defines provided by some
system headers on which we depend. Namely:
* sys/siginfo.h:
#if _SGIAPI
#define siginfo __siginfo
#endif
* sys/ucontext.h:
#if _SGIAPI && !defined(__SGI_NOUCONTEXT_COMPAT)
[...]
#define fp_r __fp_r
[...]
#define fp_csr __fp_csr
[...]
#endif
The important macro here is _SGIAPI, defined as follow in standards.h:
#define _SGIAPI ((defined(_SGI_SOURCE) && \
_NO_POSIX && _NO_XOPEN4 && _NO_XOPEN5) || \
(_ANSIMODE && _NO_POSIX && _NO_XOPEN4 && _NO_XOPEN5))
If one builds GDB without Python, then _SGIAPI is true, and all is fine.
But building with Python causes both _POSIX_C_SOURCE and _XOPEN_SOURCE
to trip all the _NO_[...] tests (_NO_POSIX, _NO_XOPEN4, _NO_XOPEN5).
And so we get build failures because we try to use undefined types, or
non-existent component names inside the regset structure.
The latter problem is observed only within irix5-nat.c, which means
that it is specific to IRIX. So it's easy to write the code in a way
that it does not require the macros (just use the real component names,
rather than relying on the macros to do the translation).
The former, on the other hand, is a little trickier, because the problem
occurs inside a generic unit (procfs.c). The solution I chose was to
adjust the configure script to add -Dsiginfo=__siginfo to the CPPFLAGS
if building with python using GCC on IRIX.
We hadn't seen this sort of issue up to now because the affect units
have not been dependent on the python includes up to now. Recent changes
have made them indirectly dependent on Python, thus triggering the issues.
gdb/ChangeLog:
* irix5-nat.c: Replace fp_r, fp_regs and fp_scr by __fp_r, __fp_regs
and __fp_scr respectively throughout.
* configure.ac: Compile with -Dsiginfo=__siginfo if building with
Python using GCC on IRIX.
* configure: Regenerate.
2010-12-14 07:17:15 +00:00
Tom Tromey
39037522c8
gdb
...
* configure: Rebuild.
* configure.ac (READLINE_TEXI_INCFLAG): New subst.
gdb/doc
* gdb.texinfo (Top): Check SYSTEM_READLINE.
(Editing): Likewise.
(Command History): Likewise.
(TUI Keys): Likewise.
(Bug Reporting): Conditionally include rluser.texi and
inc-history.texinfo.
* Makefile.in (READLINE_TEXI_INCFLAG): New variable.
(GDB_DOC_SOURCE_INCLUDES): Add comment.
(GDBvn.texi): Set SYSTEM_READLINE when appropriate.
(gdb.dvi): Use READLINE_TEXI_INCFLAG.
(gdb.pdf): Likewise.
(gdb.info): Likewise.
(gdb/index.html): Likewise.
2010-11-23 14:39:16 +00:00
Tom Tromey
5ae98d2512
gdb
...
* Makefile.in (SUBDIRS): Add doc.
* configure: Rebuild.
* configure.ac: Don't configure in doc. Create doc/Makefile.
gdb/doc
* Makefile.in (Makefile): Run ../config.status.
(distclean): Update.
* configure: Remove.
* configure.ac: Remove.
2010-11-23 14:37:26 +00:00
Jan Kratochvil
075ff26d5b
gdb/
...
Fix configure --enable-plugins --without-python.
* configure.ac (for ELF support in BFD) <"$plugins" = "yes">: New.
* configure: Regenerate.
2010-11-05 01:50:18 +00:00
Doug Evans
aa2e2d8d77
Create subdir data-directory.
...
* Makefile.in (XML_SYSCALL_DIR, XML_SYSCALL_FILES): Moved to
data-directory/Makefile.in.
(SUBDIRS): Add data-directory.
(all): Remove xml-syscall-copy dependency.
(xml-syscall-copy): Moved to data-directory/Makefile.in as
stamp-syscalls.
(xml-syscall-install): Moved to data-directory/Makefile.in as
install-syscalls.
(install-only): Remove xml-syscall-install dependency.
(all-data-directory): New rule.
(data-directory/Makefile): New rule.
* configure.ac (AC_OUTPUT): Add data-directory/Makefile.
* configure: Regenerate.
* data-directory/Makefile.in: New file.
* python/lib/gdb/__init__.py: New file.
testsuite/
* gdb.base/catch-syscall.exp (do_syscall_tests): Update location
of syscall staging area.
2010-10-06 16:02:45 +00:00
Joel Brobecker
496c0e1ba7
Allow disabling of gdbserver build (--enable-gdbserver=yes/no/auto).
...
This patch adds a new --enable-gdbserver=yes/no/auto command-line switch
in gdb/configure. The primary purpose is to allow a user to disable the
build & install of gdbserver when not desired. It also allows the user
to request gdbserver in which case the configure script will abort if
automatic building of gdbserver is not supported for that configuration.
The default keeps things as is: We automatically build gdbserver if
building for a native configuration and if gdbserver is supported for
that configuration.
gdb/ChangeLog:
* configure.ac: Add support for --enable-gdbserver.
* configure: Regenerate.
At AdaCore, this is mostly intended for ia64-linux, where we currently
do not want to distribute gdbserver. This will be useful in the context
of I417-033, where we are now using "make install" to determine what
needs to be packaged inside the GNAT Pro package.
2010-09-22 16:15:01 +00:00
Daniel Jacobowitz
0a4f61e3e4
* config.in, configure: Regenerated.
...
* configure.ac: Check for waitpid.
* ser-pipe.c (pipe_close): Wait for the program to exit.
2010-09-02 17:12:38 +00:00
Tom Tromey
94f7449c81
PR python/11900:
...
* configure: Rebuild.
* configure.ac: Add install-python to CONFIG_INSTALL.
* Makefile.in (install-python): New.
2010-08-18 22:57:46 +00:00
Tom Tromey
420697bb59
* configure: Rebuild.
...
* configure.ac: Add missing case for Python 2.7.
2010-07-30 15:59:41 +00:00
Pedro Alves
110ed33992
2010-07-28 Pedro Alves <pedro@codesourcery.com>
...
PR build/11848
* configure.ac: Check for wresize.
* configure, config.in: Regenerate.
* tui/tui-win.c (make_visible_with_new_height): Wrap wresize call
with HAVE_WRESIZE.
2010-07-28 23:24:57 +00:00
Pedro Alves
db5e03ae67
* configure.ac: Check for resize_term.
...
* configure, config.in: Regenerate.
2010-07-28 11:48:23 +00:00
Tom Tromey
11763c1856
* configure, config.in: Rebuild.
...
* configure.ac (HAVE_LIBPYTHON2_7): New define.
* python/python-internal.h: Handle HAVE_LIBPYTHON2_7.
2010-07-06 19:03:12 +00:00
Jan Kratochvil
38f6b338fd
gdb/
...
* configure.ac: Always set RDYNAMIC at least as `-rdynamic'.
* configure: Regenerate.
2010-06-23 10:12:14 +00:00
Andreas Schwab
0407b3f19d
* configure.ac: Check for RDYNAMIC also for cross builds.
...
* configure: Regenerate.
2010-06-15 18:37:18 +00:00
Jan Kratochvil
3bebe2f205
gdb/
...
* configure.ac <"${have_libpython}" != no>: New workaround of
python#4434.
* configure: Regenerate.
gdb/testsuite/
* gdb.python/python.exp (pythonX.Y/lib-dynload/*.so): New.
2010-06-08 16:41:45 +00:00
Doug Evans
e7a30f4647
* configure.ac: Don't fail if python is unusable when
...
configured with --with-python=auto.
* configure: Regenerate.
2010-06-03 18:58:39 +00:00
Jan Kratochvil
f6528abd64
gdb/
...
* Makefile.in (RDYNAMIC): New.
(SFILES): Add proc-service.list.
* config/alpha/alpha-linux.mh (NAT_CDEPS): New.
(LOADLIBES): Replace -rdynamic by $(RDYNAMIC).
* config/arm/linux.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/s390/s390.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* configure.ac: New RDYNAMIC on native host and GCC.
(solaris*): Replace -Wl,-export-dynamic by $RDYNAMIC.
* configure: Regenerate.
* proc-service.list: New.
gdb/gdbserver/
* Makefile.in (SFILES): Add $(srcdir)/proc-service.list.
(CDEPS): New.
* configure.ac (RDYNAMIC): New AC_MSG_CHECKING wrapping. Test also
-Wl,--dynamic-list.
* configure: Regenerate.
* proc-service.list: New.
2010-05-28 18:50:35 +00:00
Doug Evans
0c4a40633c
Allow python to find its files if moved from original location.
...
* acinclude.m4 (GDB_AC_DEFINE_RELOCATABLE): New function.
(GDB_AC_WITH_DIR): Call it.
* configure.ac: Define WITH_PYTHON_PATH if we can find the
python installation directory.
* config.in: Regenerate.
* configure: Regenerate.
* defs.h (python_libdir): Declare.
* main.c (python_libdir): Define.
(captured_main): Initialize python_libdir.
* python/python.c (_initialize_python): #ifdef WITH_PYTHON_PATH,
call Py_SetProgramName to make sure python can find its libraries
and modules.
2010-05-27 03:40:45 +00:00
Doug Evans
ec685c5eca
* configure.ac: Try to use python's distutils to fetch compilation
...
parameters.
* configure: Regenerate.
* python/python-config.py: New file.
2010-05-27 01:36:22 +00:00
Doug Evans
88a1906b0d
* configure.ac (CONFIG_SRCS): Add py-auto-load.o even if not using
...
python.
* configure: Regenerate.
* main.c: #include "python/python.h".
(captured_main): Defer loading auto-loaded scripts until after
local_gdbinit has been sourced.
* python/py-auto-load.c (gdbpy_global_auto_load): New global.
(load_auto_scripts_for_objfile): New function.
(auto_load_new_objfile): Call it.
* python/python.h (gdbpy_global_auto_load): Declare.
(load_auto_scripts_for_objfile): Declare.
2010-04-23 18:09:16 +00:00
Joel Brobecker
bf3071347e
Fail gdb configure if target is not supported.
...
* configure.ac: Exit if ${gdb_target_obs}" is not set.
* configure: Regenerate.
2010-03-15 17:03:03 +00:00
Tom Tromey
be391dcafc
* elfread.c (elf_symfile_read): Don't call
...
dwarf2_build_frame_info.
* dwarf2read.c (struct dwarf2_section_info) <readin>: New field.
(struct dwarf2_per_objfile) <objfile>: New field.
(dwarf2_has_info): Now idempotent. Set objfile field.
(dwarf2_read_section): Check and set readin field. Call
posix_madvise.
(dwarf2_build_psymtabs): Don't read all sections.
(read_type_comp_unit_head): Read types section.
(create_debug_types_hash_table): Likewise.
(init_cu_die_reader): Add asserts.
(process_type_comp_unit): Add assert.
(dwarf2_build_psymtabs_hard): Read info section.
(load_partial_comp_unit): Add assert.
(create_all_comp_units): Read info section.
(load_full_comp_unit): Likewise.
(dwarf2_ranges_read): Read ranges section.
(dwarf2_record_block_ranges): Add assert.
(dwarf2_read_abbrevs): Read abbrev section.
(read_indirect_string): Read str section.
(dwarf_decode_line_header): Read line section.
(read_signatured_type_at_offset): Read types section.
(dwarf_decode_macros): Read macinfo section.
(dwarf2_symbol_mark_computed): Read loc section.
* dwarf2-frame.c (dwarf2_frame_find_fde): Call
dwarf2_build_frame_info.
(dwarf2_build_frame_info): Unconditionally set
dwarf2_frame_objfile_data on the objfile.
* configure.ac: Check for posix_madvise.
* config.in, configure: Rebuild.
2010-03-10 18:37:24 +00:00
Rainer Orth
6bcc772dec
* configure.ac: Only use host_os part when disabling TUI on osf.
...
Use test to check variables, prefix strings with x.
* configure: Regenerate.
* solib-osf.c (osf_current_sos): Initialize tail.
2010-01-25 13:22:02 +00:00
Joel Brobecker
1cb5e2a45b
Add -Wunused-function to compile flags.
...
* configure.ac: Add -Wunused-function to build_warnings.
* configure: Regenerate.
2010-01-19 09:52:33 +00:00
Jan Kratochvil
7991dee782
gdb/
...
* configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
* configure: Regenerate.
* config.in: Regenerate.
* utils.c: Include sys/resource.h.
(dump_core, can_dump_core): New.
(internal_vproblem): Update the comment. Check can_dump_core while
setting dump_core_p. Replace two abort calls by dump_core calls.
2010-01-15 00:34:37 +00:00
Joel Brobecker
abd775ced8
Update the copyright header of most if not all files that have not been
...
updated yet.
2010-01-01 09:44:07 +00:00
Joel Brobecker
b040ad30f5
* acinclude.m4: Include ../config/zlib.m4.
...
* configure.ac: Use AM_ZLIB to check for zlib support.
* configure: Regenerate.
2009-11-24 22:59:53 +00:00
Jan Kratochvil
da2f07f1aa
bfd/
...
* configure.in: Call ACX_LARGEFILE. Stop calling AC_PLUGINS,
AC_SYS_LARGEFILE and checking the Solaris largefile exception.
* aclocal.m4: Regenerate.
* configure: Regenerate.
binutils/
* configure.in: Call ACX_LARGEFILE. Stop calling AC_PLUGINS,
AC_SYS_LARGEFILE and checking the Solaris largefile exception.
* aclocal.m4: Regenerate.
* configure: Regenerate.
gas/
* configure.in: Call ACX_LARGEFILE. Stop calling AC_SYS_LARGEFILE.
* aclocal.m4: Regenerate.
* configure: Regenerate.
gdb/
* configure.ac: Call ACX_LARGEFILE.
* aclocal.m4: Call m4_include for ../config/largefile.m4 and
../config/plugins.m4.
* configure: Regenerate.
* config.in: Regenerate.
gprof/
* configure.in: Call ACX_LARGEFILE. Stop calling AC_SYS_LARGEFILE.
* aclocal.m4: Regenerate.
* configure: Regenerate.
ld/
* configure.in: Call ACX_LARGEFILE. Stop calling AC_SYS_LARGEFILE.
* aclocal.m4: Regenerate.
* configure: Regenerate.
2009-11-11 04:42:42 +00:00
Pedro Alves
e23525a055
gdb/
...
* configure.ac (build_warnings): Add -Wunused-value.
* configure: Regenerate.
2009-10-14 19:44:38 +00:00
Jan Kratochvil
a71e0887e3
gdb/
...
Fix compatibility of --with-system-readline and readline-6.0+.
* configure.ac <--with-system-readline> (for readline_echoing_p): New
test.
* config.in: Regenerate.
* configure: Regenerate.
2009-10-02 16:02:34 +00:00
Joel Brobecker
2c9e3c696d
* configure.ac: Fix the names of the python source and object files
...
following the renaming done in an earlier change.
* configure: Regenerate.
2009-09-10 03:59:37 +00:00
Ralf Wildenhues
af542c2e31
Cleanups after the update to Autoconf 2.64, Automake 1.11.
...
/:
* README-maintainer-mode: Point directly to upstream locations
for autoconf, automake, libtool, gettext, instead of copies on
sources.redhat.com. Document required versions.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/:
* CONTRIBUTE: Bump documented Autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/doc/:
* gdbint.texinfo (Releasing GDB): Point to
README-maintainer-mode file for required autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gprof/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
ld/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
(install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
bfd/doc/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* Makefile.in: Regenerate.
2009-08-22 17:08:11 +00:00
Ralf Wildenhues
c462b41bcd
Minor fixes in sim, gold, gdb for Autoconf 2.64, Automake 1.11.
...
gold/:
* Makefile.am (AUTOMAKE_OPTIONS): Add foreign.
* testsuite/Makefile.am (AUTOMAKE_OPTIONS): Add foreign.
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
gdb/:
* configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
sim/common/:
* aclocal.m4 (SIM_CHECK_MEMBER): Replace definition with
definition of AC_CHECK_MEMBER.
2009-08-22 15:59:24 +00:00
Mike Frysinger
a156a29064
fix gdbtui build errors when pipe() is not available (e.g. mingw targets)
...
* configure.ac (AC_CHECK_FUNCS): Check for pipe.
* config.in, configure: Regenerate.
* tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
2009-07-20 15:24:55 +00:00
Paul Pluzhnikov
6bf0ce2bed
2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
...
Paul Pluzhnikov <ppluzhnikov@google.com>
* configure.ac (!have_libpython): Add python-prettyprint source
and object files.
* configure: Regenerate.
* python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
python headers.
2009-05-28 16:30:39 +00:00
Tom Tromey
b14b1491f2
gdb
...
2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
Tom Tromey <tromey@redhat.com>
* configure, config.in: Regenerate.
* configure.ac: Support for relocatable GDB datadir. Use
GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
* acinclude.m4 (GDB_AC_WITH_DIR): New defun.
* top.c (init_main): Add "set data-directory".
* defs.h (gdb_datadir): Declare.
* main.c (gdb_datadir): New global.
(captured_main): Initialize gdb_datadir. Use relocate_directory.
(relocate_path): New function.
(relocate_directory): Likewise.
(get_init_files): Use relocate_path.
(README): Mention --with-gdb-datadir.
gdb/doc
2009-04-23 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Data Files): New node.
(GDB Files): Update menu.
2009-04-23 21:28:20 +00:00
Tom Tromey
d2596e2e7b
* acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
...
* configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
2009-04-22 00:17:50 +00:00
Andreas Schwab
62e4f60cdb
* configure.ac: Add quotes to not lose brackets in help text.
...
* configure: Rebuild.
2009-04-21 21:01:07 +00:00
Andreas Schwab
cfd5360553
* configure.ac: Don't postprocess Makefile in config.status.
...
Substitute GDB_NM_FILE. Don't substitute nm_h.
* Makefile.in (GDB_NM_FILE): Substitute.
(TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
* configure: Regenerate.
* gnulib/Makefile.in: Regenerate.
2009-04-21 20:19:13 +00:00
Joseph Myers
26e251b603
gdb:
...
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
--with-htmldir): New.
* configure: Regenerate.
gdb/doc:
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
--with-htmldir): New.
* configure: Regenerate.
* Makefile.in (datarootdir, docdir): Define.
(gdb.dvi, gdb.pdf): Use same -I options as for building gdb.info
instead of $(SET_TEXINPUTS).
(gdbint.dvi, gdbint.pdf): Use same -I options as for building
gdbint.info instead of $(SET_TEXINPUTS).
(gdbint/index.html): Use same -I options as for building
gdbint.info.
(stabs.dvi, stabs.pdf): Use same -I options as for building
stabs.info instead of $(SET_TEXINPUTS).
(stabs/index.html): Use same -I options as for building
stabs.info.
(annotate.dvi, annotate.pdf): Use same -I options as for building
annotate.info instead of $(SET_TEXINPUTS).
(annotate/index.html): Use same -I options as for building
annotate.info.
2009-04-21 20:13:08 +00:00
Tom Tromey
32c1c914bc
* configure: Rebuild.
...
* configure.ac: Use lower case for start of help strings. Clean
up --with-sysroot help.
2009-04-21 18:09:11 +00:00
Tom Tromey
a1220294e5
* configure: Rebuild.
...
* acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
* configure.ac: Use AC_HELP_STRING. Use upper case for variables
in help.
2009-04-21 17:00:17 +00:00
Joseph Myers
29b0e8a24a
gdb:
...
* configure.ac (--with-relocated-sources): New.
* configure, config.in: Regenerate.
* source.c (add_substitute_path_rule): Remove static.
* source.h (add_substitute_path_rule): Declare.
* main.c: Include "source.h".
(captured_main): Add substitution rule if RELOC_SRCDIR.
gdb/doc:
* gdb.texinfo (Source Path): Document --with-relocated-sources.
2009-04-21 10:13:05 +00:00
Joseph Myers
89a34d1b2c
gdb:
...
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
* configure: Regenerate.
* Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
configure substitutions.
(FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
gdb/doc:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Set pdfdir and htmldir from configure
substitutions.
* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
* configure: Regenerate.
readline:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add html target. Add dummy install-html and
install-pdf targets.
sim:
2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add dummy install-pdf, html, and
install-html targets.
2009-04-17 17:44:05 +00:00
Tom Tromey
732f6a935c
gdb
...
* c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
(c_printstr): Likewise.
* charset.c: Include gdb_wait.h.
(make_wchar_iterator): Use INTERMEDIATE_ENCODING.
(find_charset_names): Use pexecute. Handle libiconv's output.
Detect errors.
(_initialize_charset): Use xstrdup.
* gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
cases.
(INTERMEDIATE_ENCODING): New define.
* configure, config.in: Rebuild.
* configure.ac: Check for btowc.
gdb/doc
* gdb.texinfo (Character Sets): Document default character set.
2009-04-15 22:20:32 +00:00
Tom Tromey
fc3b640d97
2009-03-24 Tom Tromey <tromey@redhat.com>
...
Pedro Alves <pedro@codesourcery.com>
* configure, config.in: Rebuild.
* configure.ac: Check for libiconvlist.
* charset.c: Check HAVE_LIBICONVLIST.
* acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
* Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
Remove.
(INTERNAL_CFLAGS_BASE): Update.
(INTERNAL_LDFLAGS): Update.
(CLIBS): Update.
2009-03-25 00:58:37 +00:00
Jan Kratochvil
76a39ba7a1
* configure.ac: Initialize the variable $PREFER_CURSES.
...
* configure: Regenerated.
2009-03-24 17:01:34 +00:00
Jan Kratochvil
bd8a8e1b9c
* configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
...
* configure: Regenerated.
2009-03-24 16:54:35 +00:00