gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'arch_setup' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <arch_setup>: Delete.
(class linux_process_target) <arch_setup_thread>
<low_arch_setup>: New declarations.
* linux-low.cc (linux_arch_setup): Delete.
(linux_arch_setup_thread): Turn into...
(linux_process_target::arch_setup_thread): ... this.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::post_create_inferior)
(linux_process_target::filter_event)
* linux-x86-low.cc (class x86_target) <low_arch_setup>: New
declaration.
(x86_linux_update_xmltarget): Turn into...
(x86_target::update_xmltarget): ...this.
(x86_linux_process_qsupported): Update the call to
x86_linux_update_xmltarget.
(x86_arch_setup): Turn into ...
(x86_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <low_arch_setup>: New
declaration.
(aarch64_arch_setup): Turn into ...
(aarch64_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_arch_setup>: New
declaration.
(arm_arch_setup): Turn into ...
(arm_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <low_arch_setup>: New
declaration.
(bfin_arch_setup): Turn into ...
(bfin_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <low_arch_setup>: New
declaration.
(cris_arch_setup): Turn into ...
(cris_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target) <low_arch_setup>: New
declaration.
(crisv32_arch_setup): Turn into ...
(crisv32_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <low_arch_setup>: New
declaration.
(ia64_arch_setup): Turn into ...
(ia64_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (class m32r_target) <low_arch_setup>: New
declaration.
(m32r_arch_setup): Turn into ...
(m32r_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <low_arch_setup>: New
declaration.
(m68k_arch_setup): Turn into ...
(m68k_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_arch_setup>: New
declaration.
(mips_arch_setup): Turn into ...
(mips_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target) <low_arch_setup>: New
declaration.
(nios2_arch_setup): Turn into ...
(nios2_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <low_arch_setup>: New
declaration.
(ppc_arch_setup): Turn into ...
(ppc_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <low_arch_setup>: New
declaration.
(riscv_arch_setup): Turn into ...
(riscv_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <low_arch_setup>: New
declaration.
(s390_arch_setup): Turn into ...
(s390_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target) <low_arch_setup>: New
declaration.
(sh_arch_setup): Turn into ...
(sh_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <low_arch_setup>: New
declaration.
(sparc_arch_setup): Turn into ...
(sparc_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <low_arch_setup>: New
declaration.
(tic6x_arch_setup): Turn into ...
(tic6x_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <low_arch_setup>: New
declaration.
(tile_arch_setup): Turn into ...
(tile_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target) <low_arch_setup>: New
declaration.
(xtensa_arch_setup): Turn into ...
(xtensa_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
This is the beginning of a series of patches that convert the linux
low targets into classes derived from linux_process_target. At the
end of the series we obtain a class hierarchy that looks like this:
process_stratum_target
^
|
|-- linux_process_target
^
|
|-- x86_target (defined in linux-x86-low)
|-- aarch64_target (defined in linux-aarch64-low)
|-- ppc_target (defined in linux-ppc-low)
|-- ...
In several cases, linux_process_target simply forwards a target op
request to a corresponding linux_target_ops function. For these
cases, the definition in linux_process_target will be removed and the
definition will be left to the deriving linux low target class; using
inheritance provides a nice and natural, object-oriented
simplification in these cases.
The series converts linux_target_ops into protected methods of
linux_process_target one by one. Throughout the series, based on the
needs, static functions defined in linux-low.cc are converted to
private methods of linux_process_target as well. This is done either
as separate patches or as integrated into a patch that convert a
particular linux_target_op into a method.
The series ends with the patch titled "gdbserver/linux-low: delete
'linux_target_ops' and 'the_low_target'".
Built and regression-tested on x86_64-linux. The following linux low
targets have been built (but not tested) via cross-compilation:
aarch64, arm, m68k, mips, ppc, riscv, s390, sh, sparc. The other
targets (bfin, cris, crisv32, ia64, m32r, nios2, tic6x, tile, xtensa)
were neither built nor tested.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-low.h (the_linux_target): New extern declaration.
* linux-low.cc (initialize_low): Use 'the_linux_target' to set
'the_target'.
(the_linux_target): Remove.
* linux-x86-low.cc (class x86_target): New class.
(the_x86_target): New static object.
(the_linux_target): Define as pointer to the_x86_target.
* linux-aarch64-low.cc (class aarch64_target): New class.
(the_aarch64_target): New static object.
(the_linux_target): Define as pointer to the_aarch64_target.
* linux-arm-low.cc (class arm_target): New class.
(the_arm_target): New static object.
(the_linux_target): Define as pointer to the_arm_target.
* linux-bfin-low.cc (class bfin_target): New class.
(the_bfin_target): New static object.
(the_linux_target): Define as pointer to the_bfin_target.
* linux-cris-low.cc (class cris_target): New class.
(the_cris_target): New static object.
(the_linux_target): Define as pointer to the_cris_target.
* linux-crisv32-low.cc (class crisv32_target): New class.
(the_crisv32_target): New static object.
(the_linux_target): Define as pointer to the_crisv32_target.
* linux-ia64-low.cc (class ia64_target): New class.
(the_ia64_target): New static object.
(the_linux_target): Define as pointer to the_ia64_target.
* linux-m32r-low.cc (class m32r_target): New class.
(the_m32r_target): New static object.
(the_linux_target): Define as pointer to the_m32r_target.
* linux-m68k-low.cc (class m68k_target): New class.
(the_m68k_target): New static object.
(the_linux_target): Define as pointer to the_m68k_target.
* linux-mips-low.cc (class mips_target): New class.
(the_mips_target): New static object.
(the_linux_target): Define as pointer to the_mips_target.
* linux-nios2-low.cc (class nios2_target): New class.
(the_nios2_target): New static object.
(the_linux_target): Define as pointer to the_nios2_target.
* linux-ppc-low.cc (class ppc_target): New class.
(the_ppc_target): New static object.
(the_linux_target): Define as pointer to the_ppc_target.
* linux-riscv-low.cc (class riscv_target): New class.
(the_riscv_target): New static object.
(the_linux_target): Define as pointer to the_riscv_target.
* linux-s390-low.cc (class s390_target): New class.
(the_s390_target): New static object.
(the_linux_target): Define as pointer to the_s390_target.
* linux-sh-low.cc (class sh_target): New class.
(the_sh_target): New static object.
(the_linux_target): Define as pointer to the_sh_target.
* linux-sparc-low.cc (class sparc_target): New class.
(the_sparc_target): New static object.
(the_linux_target): Define as pointer to the_sparc_target.
* linux-tic6x-low.cc (class tic6x_target): New class.
(the_tic6x_target): New static object.
(the_linux_target): Define as pointer to the_tic6x_target.
* linux-tile-low.cc (class tile_target): New class.
(the_tile_target): New static object.
(the_linux_target): Define as pointer to the_tile_target.
* linux-xtensa-low.cc (class xtensa_target): New class.
(the_xtensa_target): New static object.
(the_linux_target): Define as pointer to the_xtensa_target.
The comment for the linux target op 'cannot_store_register' states the
following:
/* Returns 0 if we can store the register, 1 if we can not
store the register, and 2 if failure to store the register
is acceptable. */
There is only one low target, linux-ppc-low, that potentially returns
2. There are two places that call the 'cannot_store_register' target
op in linux-low.cc. None of these locations distinguish a '2' from a
'1'. Hence, to simplify the definition, make the function a predicate
that returns either 0 or 1. This is also consistent with the
companion function, 'cannot_fetch_register'.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-low.h (struct linux_target_ops): Update the comment for
'cannot_store_register' to return 0 or 1.
* linux-ppc-low.cc (ppc_cannot_store_register): Return 1 instead
of 2.
Compile with -I../bfd to include <bfd_stdint.h> in PR ld/25749 tests.
* testsuite/ld-elf/linux-x86.exp (check_pr25749a): Compile with
-I../bfd.
(check_pr25749b): Likewise.
A couple of ld ifunc tests currently FAIL on 64-bit Solaris/x86:
FAIL: ld-ifunc/ifunc-10-x86-64
FAIL: ld-ifunc/ifunc-11-x86-64
FAIL: ld-ifunc/ifunc-12-x86-64
FAIL: ld-ifunc/ifunc-13-x86-64
FAIL: ld-ifunc/ifunc-14a-x86-64
FAIL: ld-ifunc/ifunc-14b-x86-64
FAIL: ld-ifunc/ifunc-14c-x86-64
FAIL: ld-ifunc/ifunc-14d-x86-64
FAIL: ld-ifunc/ifunc-14e-x86-64
FAIL: ld-ifunc/ifunc-14f-x86-64
FAIL: ld-ifunc/ifunc-15-x86-64
FAIL: ld-ifunc/ifunc-17a-x86-64
FAIL: ld-ifunc/ifunc-17b-x86-64
FAIL: ld-ifunc/ifunc-2-local-x86-64-now
FAIL: ld-ifunc/ifunc-2-local-x86-64
FAIL: ld-ifunc/ifunc-2-x86-64-now
FAIL: ld-ifunc/ifunc-2-x86-64
FAIL: ld-ifunc/ifunc-20-x86-64
FAIL: ld-ifunc/pr17154-x86-64-now
FAIL: ld-ifunc/pr17154-x86-64
For one, the actual error is weird:
./ld-new: target elf64-x86-64 not found
failed with: <./ld-new: target elf64-x86-64 not found>, no expected output
FAIL: ld-ifunc/ifunc-10-x86-64
although ld -V does report the elf_x86_64 emulation as supported:
$ ./ld/ld-new -V
GNU ld (GNU Binutils) 2.34.50.20200328
Supported emulations:
elf_x86_64_sol2
elf_x86_64
[...]
When using ld -m elf_x86_64_sol2 instead, one of the testcases links
successfully.
However, there's no point in pursuing this: Solaris does not support
ifunc, as can be seen in <sys/elf.h>:
/*
* GNU/Linux specific symbol type not used by Solaris
*/
#define STT_GNU_IFUNC 10
and never will, given that it has symbol capabilities as solution to
effectively the same problem:
http://www.linker-aliens.org/blogs/rie/entry/symbol_capabilitie/
Therefore this patch disables ifunc testing on Solaris completely by
removing Solaris from binutils/testsuite/lib/binutils-common.exp
(supports_gnu_osabi). The ifunc part is justified above. SHF_GNU_MBIND is
in the OS-specific range and conflicts with
#define SHF_SUNW_REALLOC 0x01000000 /* internal: krtld realloc */
While the comment suggests this might be relocatable without too much
problems, the description of mbind (no formal spec AFAICS, just the
comment in the binutils patch submission) strongly suggests that this
isn't relevant to Solaris at all.
Indirectly, clearing supports_gnu_osabi on Solaris disables
supports_gnu_unique. Again, Solaris <sys/elf.h> has
/*
* GNU/Linux specific binding not used by Solaris
*/
#define STB_GNU_UNIQUE 10
so this seems the right thing to do.
Afterwards, one can remove the explicit mentions of *-*-solaris2* in
quite a number of (but not all) the ld-ifunc dump file notarget lists.
There's one fallout, though: two gas tests now XPASS because they are
xfail'ed for !supports_gnu_osabi:
XPASS: mbind sections 12
XPASS: mbind section contents 16
XPASS: mbind sections 16
XPASS: mbind section contents 16
To fix that, I've changed
#xfail: ![supports_gnu_osabi]
to notarget.
Tested on x86_64-pc-solaris2.11, i386-pc-solaris2.11,
x86_64-pc-linux-gnu, and i686-pc-linux-gnu.
ld:
* testsuite/ld-ifunc/ifunc-10-i386.d: Remove *-*-solaris2* from
notarget.
* ifunc-11-i386.d: Likewise.
* ifunc-12-i386.d: Likewise.
* ifunc-13-i386.d: Likewise.
* ifunc-14a-i386.d: Likewise.
* ifunc-14b-i386.d: Likewise.
* ifunc-14c-i386.d: Likewise.
* ifunc-14d-i386.d: Likewise.
* ifunc-14e-i386.d: Likewise.
* ifunc-14f-i386.d: Likewise.
* ifunc-15-i386.d: Likewise.
* ifunc-16-i386-now.d: Likewise.
* ifunc-16-i386.d: Likewise.
* ifunc-17a-i386.d: Likewise.
* ifunc-17b-i386.d: Likewise.
* ifunc-18a-i386.d: Likewise.
* ifunc-18b-i386.d: Likewise.
* ifunc-19a-i386.d: Likewise.
* ifunc-19b-i386.d: Likewise.
* ifunc-2-i386-now.d: Likewise.
* ifunc-2-i386.d: Likewise.
* ifunc-2-local-i386-now.d: Likewise.
* ifunc-2-local-i386.d: Likewise.
* ifunc-20-i386.d: Likewise.
* ifunc-21-i386.d: Likewise.
* ifunc-22-i386.d: Likewise.
* ifunc-5a-i386.d: Likewise.
* ifunc-5a-local-i386.d: Likewise.
* ifunc-5b-i386.d: Likewise.
* ifunc-5b-local-i386.d: Likewise.
* ifunc-5r-local-i386.d: Likewise.
* ifunc-6a-i386.d: Likewise.
* ifunc-6b-i386.d: Likewise.
* ifunc-7a-i386.d: Likewise.
* ifunc-7b-i386.d: Likewise.
* ifunc-8-i386.d: Likewise.
* ifunc-9-i386.d: Likewise.
* pr17154-i386-now.d: Likewise.
* pr17154-i386.d: Likewise.
* ifunc-23a-x86.d: Remove notarget.
* ifunc-24a-x86.d: Likewise.
* ifunc-25a-x86.d: Likewise.
gas:
* testsuite/gas/elf/section12a.d: Use notarget instead of xfail.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
binutils:
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Don't
enable on *-*-solaris*.
While running test-case gdb.multi/multi-target.exp, I observed a silent
timeout related to "monitor exit".
By making the timeout explicit in an expect clause in gdbserver_gdb_exit:
...
+ timeout {
+ warning "Timed out waiting for EOF in server after $monitor_exit"
+ }
...
we get in the log:
...
monitor exit^M
"monitor" command not supported by this target.^M
(gdb) WARNING: Timed out waiting for EOF in server after monitor exit
...
What happens is the following:
- the inferior 5 is selected
- a breakpoint is set in inferior 1
- the breakpoint triggers and we switch to inferior 1
- setup is called by test_continue, which calls clean_restart, which calls
gdbserver_gdb_exit (due to load_lib gdbserver-support.exp)
- gdbserver_gdb_exit issues "monitor exit"
- gdb responds with "not supported by this target" because inferior 1 is
native
Fix this by keeping a list of server_spawn_id, and cleaning those up before
calling gdbserver_gdb_exit.
This reduces testing time from 1m22s to 32s.
gdb/testsuite/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* lib/gdbserver-support.exp (gdbserver_exit): Factor out of ...
(gdbserver_gdb_exit): ... here. Add timeout warning.
* gdb.multi/multi-target.exp (server_spawn_ids): New global var.
(connect_target_extended_remote): Append new server_spawn_id to
server_spawn_ids.
(cleanup): New proc.
(setup, <toplevel>): Call cleanup.
When running test-case gdb.ada/access_to_packed_array we have:
...
(gdb) print pack.a^M
$1 = (0 => 1, 2, 3, 4, 5, 6, 7, 8, 9, 10)^M
...
but with target board readnow.exp, we have instead:
...
(gdb) print pack.a^M
'pack.a' has unknown type; cast it to its declared type^M
...
The symbol is normally found by the map_matching_symbols call in
ada-lang.c:add_nonlocal_symbols:
...
for (objfile *objfile : current_program_space->objfiles ())
{
data.objfile = objfile;
objfile->sf->qf->map_matching_symbols (objfile, lookup_name,
domain, global, callback,
(is_wild_match
? NULL : compare_names));
...
which maps onto psym_map_matching_symbols.
Function psym_map_matching_symbols iterates over all the partial symtabs,
and:
- if not expanded, searches in the partial symtab:
- if not found, continues to the next
- if found, expands into full symtab
- searches in the full symtab
However, with -readnow the call maps onto dw2_map_matching_symbols instead,
which is unimplemented, and consequently no symbol is found.
Fix this by detecting -readnow in dw2_map_matching_symbols, and handling that
appropriately given that partial symtabs are not present, and full symtabs
are: iterate over all the symtabs and search them.
Tested on x86_64-linux, with native and target board -readnow.
This removes 217 FAILs with board -readnow.
gdb/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
PR ada/24671
* dwarf2/read.c (dw2_map_matching_symbols): Handle -readnow.
When language is set to auto, part of loading an executable is to update the
language accordingly. This is implemented by set_initial_language.
The implementation of set_initial_language works as follows:
- check if any objfile in the progspace has name_of_main/language_of_main
set, and if so, use the first one found. [ This is what you get f.i. when
using dwarf with DW_AT_main_subprogram. ]
- otherwise, check for known names in the minimal symbols, and either:
- use the associated language if any (f.i. for ada), or
- lookup the symbol in the symtab for the name and use the symbol language
(f.i. for c/c++).
The symbol lookup can be slow though.
In the case of the cc1 binary from PR23710 comment 1, getting to the initial
prompt takes ~8s:
...
$ time.sh gdb cc1 -batch -ex "show language"
The current source language is "auto; currently c++".
maxmem: 1272260
real: 8.05
user: 7.73
system: 0.38
...
but if we skip guessing the initial language by setting it instead, it takes
only ~4s:
...
$ time.sh gdb -iex "set language c++" cc1 -batch -ex "show language"
The current source language is "c++".
maxmem: 498272
real: 3.99
user: 3.90
system: 0.15
...
In both cases, we load the partial symbols for the executable, but in the
first case only we also do a lookup of main, which causes the corresponding
partial symtab to be expanded into a full symtab.
Ideally, we'd like to get the language of the symbol without triggering
expansion into a full symtab, and get the speedup without having to set the
language manually.
There's a related fixme in the header comment of set_initial_language:
...
/* Set the initial language.
FIXME: A better solution would be to record the language in the
psymtab when reading partial symbols, and then use it (if known) to
set the language. This would be a win for formats that encode the
language in an easily discoverable place, such as DWARF. For
stabs, we can jump through hoops looking for specially named
symbols or try to intuit the language from the specific type of
stabs we find, but we can't do that until later when we read in
full symbols. */
void
set_initial_language (void)
...
Since we're already tracking the language of partial symbols, use this to set
the language for the main symbol.
Note that this search in partial symbol tables is not guaranteed to yield the
same result as the lookup_symbol_in_language call currently done in
set_initial_language.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (dwarf2_gdb_index_functions,
dwarf2_debug_names_functions): Init lookup_global_symbol_language with
NULL.
* psymtab.c (psym_lookup_global_symbol_language): New function.
(psym_functions): Init psym_lookup_global_symbol_language with
psym_lookup_global_symbol_language.
* symfile-debug.c (debug_sym_quick_functions): Init
lookup_global_symbol_language with NULL.
* symfile.c (set_initial_language): Remove fixme comment.
* symfile.h (struct quick_symbol_functions): Add
lookup_global_symbol_language.
* symtab.c (find_quick_global_symbol_language): New function.
(find_main_name): Use find_quick_global_symbol_language.
gdb/testsuite/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* gdb.base/main-psymtab.exp: New file.
Since commit 981c08ce72 "Change how complex types are printed in C", we see
these FAILs:
...
FAIL: gdb.fortran/mixed-lang-stack.exp: lang=auto: info args in frame #6
FAIL: gdb.fortran/mixed-lang-stack.exp: lang=c: info args in frame #6
FAIL: gdb.fortran/mixed-lang-stack.exp: lang=c: info args in frame #7
FAIL: gdb.fortran/mixed-lang-stack.exp: lang=c++: info args in frame #6
FAIL: gdb.fortran/mixed-lang-stack.exp: lang=c++: info args in frame #7
...
The problem is that printing of complex types has changed from:
...
d = 4 + 5 * I
...
to:
...
d = 4 + 5i
...
but the test-case still checks for the old printing style.
Fix this by updating the test-case to check for the new style.
gdb/testsuite/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* gdb.fortran/mixed-lang-stack.exp: Accept new complex printing style.
Additionally do not completely remove symbols
at the same PC than the end marker, instead
make them non-is-stmt breakpoints.
2020-04-01 Bernd Edlinger <bernd.edlinger@hotmail.de>
* buildsym.c (record_line): Fix undefined behavior and preserve
lines at eof.
Since value of non-preemptible absolute symbol (SHN_ABS) won't change,
only relocations, which can be resolved as absolute value + addend, and
GOTPCREL relocations, where absolute value + addend is stored in the GOT
slot, against non-preemptible absolute symbol are allowed in PIE and
shared library.
Also convert load relocation to R_386_32, R_X86_64_32S or R_X86_64_32 for
relocation against non-preemptible absolute symbol. Don't convert to
R_X86_64_32S nor R_X86_64_32 for non-preemptible absolute symbol if they
overflow.
bfd/
PR ld/25749
PR ld/25754
* elf32-i386.c (elf_i386_convert_load_reloc): Convert load
relocation to R_386_32 for relocation against non-preemptible
absolute symbol.
(elf_i386_check_relocs): Call _bfd_elf_x86_valid_reloc_p. Don't
allocate dynamic relocation for non-preemptible absolute symbol.
(elf_i386_relocate_section): Pass sec to
GENERATE_DYNAMIC_RELOCATION_P.
* elf64-x86-64.c (R_X86_64_converted_reloc_bit): Moved.
(elf_x86_64_convert_load_reloc): Covert load relocation to
R_X86_64_32S or R_X86_64_32 for relocation against non-preemptible
absolute symbol. Don't convert to R_X86_64_32S nor R_X86_64_32
for non-preemptible absolute symbol if they overflow.
(elf_x86_64_check_relocs): Call _bfd_elf_x86_valid_reloc_p. Set
tls_type for GOT slot to GOT_ABS for non-preemptible absolute
symbol. Don't allocate dynamic relocation for non-preemptible
absolute symbol.
(elf_x86_64_relocate_section): Don't generate relative relocation
for GOTPCREL relocations aganst local absolute symbol. Pass sec
to GENERATE_DYNAMIC_RELOCATION_P.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): No dynamic relocation
against non-preemptible absolute symbol.
(_bfd_elf_x86_valid_reloc_p): New function.
(_bfd_x86_elf_size_dynamic_sections): No dynamic relocation for
GOT_ABS GOT slot.
* elfxx-x86.h (GENERATE_DYNAMIC_RELOCATION_P): Add an SEC
argument. Don't generate dynamic relocation against
non-preemptible absolute symbol.
(ABS_SYMBOL_P): New.
(GENERATE_RELATIVE_RELOC_P): Don't generate relative relocation
against non-preemptible absolute symbol.
(GOT_ABS): New.
(R_X86_64_converted_reloc_bit): New. Moved from elf64-x86-64.c.
(_bfd_elf_x86_valid_reloc_p): New.
ld/
PR ld/25749
PR ld/25754
* testsuite/ld-elf/linux-x86.exp: Run ld/25749 tests.
* testsuite/ld-elf/pr25749-1.c: New file.
* testsuite/ld-elf/pr25749-1a.c: Likewise.
* testsuite/ld-elf/pr25749-1b.c: Likewise.
* testsuite/ld-elf/pr25749-1b.err: Likewise.
* testsuite/ld-elf/pr25749-1c.c: Likewise.
* testsuite/ld-elf/pr25749-1d.c: Likewise.
* testsuite/ld-elf/pr25749-2.c: Likewise.
* testsuite/ld-elf/pr25749-2a.s: Likewise.
* testsuite/ld-elf/pr25749-2b.s: Likewise.
* testsuite/ld-elf/pr25749.rd: Likewise.
* testsuite/ld-elf/pr25754-1a.c: Likewise.
* testsuite/ld-elf/pr25754-1b.s: Likewise.
* testsuite/ld-elf/pr25754-2a.c: Likewise.
* testsuite/ld-elf/pr25754-2b.err: Likewise.
* testsuite/ld-elf/pr25754-2b.s: Likewise.
* testsuite/ld-elf/pr25754-3a.c: Likewise.
* testsuite/ld-elf/pr25754-3b.s: Likewise.
* testsuite/ld-elf/pr25754-4a.c: Likewise.
* testsuite/ld-elf/pr25754-4b.s: Likewise.
* testsuite/ld-elf/pr25754-4c.s: Likewise.
* testsuite/ld-elf/pr25754-5a.c: Likewise.
* testsuite/ld-elf/pr25754-5b.s: Likewise.
* testsuite/ld-elf/pr25754-5c.s: Likewise.
* testsuite/ld-elf/pr25754-6a.c: Likewise.
* testsuite/ld-elf/pr25754-6b.s: Likewise.
* testsuite/ld-x86-64/pr19609-6a.d: Don't expect linker error.
Christian pointed out that the value_literal_complex was still a bit
weird; this patch rewrites it and moves it to value.h.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* value.h (value_literal_complex): Add comment.
* valops.c (value_literal_complex): Refer to value.h.
This changes the C parser to add support for complex types in casts.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* c-exp.y (FLOAT_KEYWORD, COMPLEX): New tokens.
(scalar_type): New rule, from typebase.
(typebase): Use scalar_type. Recognize complex types.
(field_name): Handle FLOAT_KEYWORD.
(ident_tokens): Add _Complex and __complex__.
gdb/testsuite/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* gdb.base/complex-parts.exp: Add type tests.
This adds support for complex arithmetic to gdb. Now something like
"print 23 + 7i" will work.
Addition, subtraction, multiplication, division, and equality testing
are supported binary operations.
Unary +, negation, and complement are supported. Following GCC, the ~
operator computes the complex conjugate.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
PR exp/25299:
* valarith.c (promotion_type, complex_binop): New functions.
(scalar_binop): Handle complex numbers. Use promotion_type.
(value_pos, value_neg, value_complement): Handle complex numbers.
gdb/testsuite/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* gdb.base/complex-parts.exp: Add arithmetic tests.
This changes the C parser to allow complex constants. Now something
like "print 23i" will work.
There are no tests in this patch; they come later.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* c-exp.y (COMPLEX_INT, COMPLEX_FLOAT): New tokens.
(exp) <COMPLEX_INT, COMPLEX_FLOAT>: New rules.
(parse_number): Handle complex numbers.
GCC accepts the "i" suffix for complex numbers. I think this is nicer
to read than the current output, so this patch changes the C code to
print complex numbers this way.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_decorations): Change complex suffix to "i".
gdb/testsuite/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* gdb.compile/compile.exp: Update.
* gdb.compile/compile-cplus.exp: Update.
* gdb.base/varargs.exp: Update.
* gdb.base/floatn.exp: Update.
* gdb.base/endianity.exp: Update.
* gdb.base/callfuncs.exp (do_function_calls): Update.
* gdb.base/funcargs.exp (complex_args, complex_integral_args)
(complex_float_integral_args): Update.
* gdb.base/complex.exp: Update.
* gdb.base/complex-parts.exp: Update.
This introduces two new functions that make it simpler to access the
components of a complex number.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print_complex): Use accessors.
* value.h (value_real_part, value_imaginary_part): Declare.
* valops.c (value_real_part, value_imaginary_part): New
functions.
* value.c (creal_internal_fn, cimag_internal_fn): Use accessors.
This patch changes how complex types are created. init_complex_type
and arch_complex_type are unified, and complex types are reused, by
attaching them to the underlying scalar type.
gdb/ChangeLog
2020-04-01 Tom Tromey <tom@tromey.com>
* stabsread.c (rs6000_builtin_type, read_sun_floating_type)
(read_range_type): Update.
* mdebugread.c (basic_type): Update.
* go-lang.c (build_go_types): Use init_complex_type.
* gdbtypes.h (struct main_type) <complex_type>: New member.
(init_complex_type): Update.
(arch_complex_type): Don't declare.
* gdbtypes.c (init_complex_type): Remove "objfile" parameter.
Make name if none given. Use alloc_type_copy. Look for cached
complex type.
(arch_complex_type): Remove.
(gdbtypes_post_init): Use init_complex_type.
* f-lang.c (build_fortran_types): Use init_complex_type.
* dwarf2/read.c (read_base_type): Update.
* d-lang.c (build_d_types): Use init_complex_type.
* ctfread.c (read_base_type): Update.
I wanted to run the gdb.rust tests against older versions of the Rust
compiler, to ensure that changes I am making don't break debugging
when using older compilers.
However, this did not work because simple.rs now uses unchecked
unions, which were only added in Rust 1.19.
This patch splits the union code into its own file, so that simple.exp
can continue to work. I tested this with selected rust versions back
to 1.12.
gdb/testsuite/ChangeLog
2020-04-01 Tom Tromey <tromey@adacore.com>
* gdb.rust/union.rs: New file.
* gdb.rust/union.exp: New file.
* gdb.rust/simple.rs (Union, Union2): Move to union.rs.
(main): Update.
* gdb.rust/simple.exp: Move union tests to union.exp.
This removes the "y0" variable from simple.rs:main. This variable
isn't needed by the test case, and it uses a form of initialization
that was added in rust 1.17. Removing this makes it simpler to run
the gdb.rust tests against older versions of rustc.
gdb/testsuite/ChangeLog
2020-04-01 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.rs (main): Remove "y0".
Stop all threads not only if the current target is non-stop, but also
if there exists a non-stop target.
The multi-target patch (5b6d1e4fa4 "Multi-target support") made the
following change to gdb/inf-child.c:
void
inf_child_target::maybe_unpush_target ()
{
- if (!inf_child_explicitly_opened && !have_inferiors ())
+ if (!inf_child_explicitly_opened)
unpush_target (this);
}
If we are in all-stop mode with multiple inferiors, and an exit event
is received from an inferior, target_mourn_inferior() gets to this
point and without the have_inferiors() check, the target is unpushed.
This leads to having exec_ops as the top target.
Here is a test scenario. Two executables, ./a.out returns
immediately; ./sleepy just sleeps.
$ gdb ./sleepy
(gdb) start
...
(gdb) add-inferior -exec ./a.out
...
(gdb) inferior 2
[Switching to inferior 2..
(gdb) start
...
(gdb) set schedule-multiple on
(gdb) set debug infrun 1
(gdb) continue
At this point, the exit event is received from ./a.out. Normally,
this would lead to stop_all_threads() to also stop ./sleepy, but this
doesn't happen, because target_is_non_stop_p() returns false. And it
returns false because the top target is no longer the process target;
it is the exec_ops.
This patch modifies 'stop_waiting' to call 'stop_all_threads' if there
exists a non-stop target, not just when the current top target is
non-stop.
Tested on X86_64 Linux.
gdb/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (stop_all_threads): Update assertion, plus when
stopping threads, take into account that we might be trying
to stop an all-stop target.
(stop_waiting): Call 'stop_all_threads' if there exists a
non-stop target.
gdb/testsuite/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.multi/stop-all-on-exit.c: New test.
* gdb.multi/stop-all-on-exit.exp: New file.
Define a predicate function that returns true if there exists an
inferior with a non-stop target.
gdb/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* target.h (exists_non_stop_target): New function declaration.
* target.c (exists_non_stop_target): New function.
NaCL does not support dynamic linking and so these tests should be
skipped under it.
ld/ChangeLog:
PR ld/16017
* testsuite/ld-arm/arm-elf.exp (thumb-plt, thumb-plt-got): Skip for NaCL.
Considering these variables:
int i = 3;
int &iref = i;
It's not possible to do any pointer arithmetic with iref:
(gdb) p &i+iref
Argument to arithmetic operation not a number or boolean.
So this adds checks for references to integers in pointer arithmetic.
gdb/ChangeLog:
2020-04-01 Hannes Domani <ssbssa@yahoo.de>
PR gdb/24789
* eval.c (is_integral_or_integral_reference): New function.
(evaluate_subexp_standard): Allow integer references in
pointer arithmetic.
gdb/testsuite/ChangeLog:
2020-04-01 Hannes Domani <ssbssa@yahoo.de>
PR gdb/24789
* gdb.cp/misc.cc: Add integer reference variable.
* gdb.cp/misc.exp: Add test.
PR ld/25747
* ldfile.c (ldfile_open_file): If a search for a library fails,
but there is a file that would match if it had a "lib" prefix to
its name, then tell the user.
A gdbserver does not report a ptid in a 'W' or 'X' packet if multi-process
extensions are not supported or turned off. See
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#multiprocess-extensionshttps://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html#Stop-Reply-Packets
GDB's remote packet parser checks for whether a stop-reply packet
contains a ptid if the target is non-stop, and issues an error if no
ptid is included:
if (target_is_non_stop_p () && event->ptid == null_ptid)
error (_("No process or thread specified in stop reply: %s"), buf);
This leads to the following error when the non-stop
mode is turned on but multi-process extensions are off:
$ gdb
(gdb) set non-stop on
(gdb) set remote multiprocess-feature-packet off
(gdb) target remote | gdbserver - ./foo
Remote debugging using | gdbserver - ./foo
stdin/stdout redirected
Process ./foo created; pid = 3712
...
(gdb) continue
Continuing.
...
No process or thread specified in stop reply: W2a
(gdb)
Because the check is done for stop reply packets in general, a similar
situation occurs if the 'T' or 'Tthread' packet is disabled in
gdbserver (i.e. via --disable-packet=T). E.g:
$ gdb
(gdb) set non-stop on
(gdb) target remote | gdbserver --disable-packet=Tthread - ./foo
...
No process or thread specified in stop reply: T0506:0000000000000000;07:10e2ffffff7f0000;10:9060ddf7ff7f0000;
or
$ gdb
(gdb) set non-stop on
(gdb) target remote | gdbserver --disable-packet=T - ./foo
...
No process or thread specified in stop reply: S05
The commit
commit cada5fc921
Date: Wed Mar 11 12:30:13 2020 +0000
gdb: Handle W and X remote packets without giving a warning
and its predecessor
commit 24ed6739b6
Date: Thu Jan 30 14:35:40 2020 +0000
gdb/remote: Restore support for 'S' stop reply packet
added warnings for when GDB has to make a guess for a missing ptid in
case of multiple threads/inferiors. These warnings should suffice.
So, the simple solution is to remove the check completely.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* remote.c (remote_target::remote_parse_stop_reply): Remove the
check for no ptid in the stop reply when the target is non-stop.
gdb/testsuite/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.server/stop-reply-no-thread.exp: Enhance the test
scenario to cover execution until the end and also the case
when no packet is disabled when starting gdbserver.
lookup_name_info always copies the name that is passed in. However,
normally a copy is not needed. This patch changes this class to avoid
copying. This required changing the "name" method to return something
else; I chose a gdb::string_view, to avoid excessive calls to strlen
in the code using the lookup_name_info. However, as this class does
not allow an arbitrary string_view, I've also added a c_str method
that guarantees a \0-terminated result -- a pedantic difference but
one that respects the string_view contract, IMO.
gdb/ChangeLog
2020-04-01 Tom Tromey <tromey@adacore.com>
* symtab.h (class lookup_name_info) <lookup_name_info>: Change
"name" parameter to rvalue reference. Initialize m_name_holder.
<lookup_name_info>: New overloads.
<name>: Return gdb::string_view.
<c_str>: New method.
<make_ignore_params>: Update.
<search_name_hash>: Update.
<language_lookup_name>: Return const char *.
<m_name>: Change type.
* symtab.c (demangle_for_lookup_info::demangle_for_lookup_info)
(demangle_for_lookup_info::demangle_for_lookup_info): Update.
(lookup_name_info::match_any): Update.
* psymtab.c (match_partial_symbol, lookup_partial_symbol):
Update.
* minsyms.c (linkage_name_str): Update.
* language.c (default_symbol_name_matcher): Update.
* dwarf2/read.c (mapped_index_base::find_name_components_bounds):
Update.
* ada-lang.c (ada_fold_name): Change parameter to string_view.
(ada_lookup_name_info::ada_lookup_name_info): Update.
(literal_symbol_name_matcher): Update.
I noticed that psymtab.c was always copying the search string in
psymtab_search_name, even when it wasn't necessary. This patch
removes this function in favor of using the make_ignore_params feature
of lookup_name_info.
Once I had done that, I noticed that lookup_partial_symbol was
creating a lookup_name_info. However, this function called in loops,
causing even more excess allocation. This patch further fixes this by
hosting the creation of the lookup_name_info into the callers.
gdb/ChangeLog
2020-04-01 Tom Tromey <tromey@adacore.com>
* psymtab.c (psymtab_search_name): Remove function.
(psym_lookup_symbol): Create search name and lookup name here.
(lookup_partial_symbol): Remove "name" parameter; add
lookup_name.
(psym_expand_symtabs_for_function): Update.
Define TC_FORCE_RELOCATION_ABS to force relocation against local
absolute symbol.
PR gas/25756
* config/tc-i386.h (TC_FORCE_RELOCATION_ABS): New.
* testsuite/gas/i386/localpic.s: Add a test for relocation
against local absolute symbol.
* testsuite/gas/i386/x86-64-localpic.s: Likewise.
* testsuite/gas/i386/localpic.d: Updated.
* testsuite/gas/i386/x86-64-localpic.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise.
As reported in PR gas/25732, some testcases currently FAIL on
Solaris/x86:
FAIL: x86-64 branch 2
FAIL: x86-64 branch 3
FAIL: x86-64 MPX branch
FAIL: x86-64 branch with BND prefix
FAIL: x86-64 jump
Since https://sourceware.org/ml/binutils/2019-03/msg00163.html, gas
doesn't emit R_X86_64_PLT32 as branch marker on Solaris. Since the
testsuite lacks a way to preprocess dump files, adjusted copies of the
affected dumps are now used on Solaris. Unfortunately, those dumps
weren't adapted when the original testcases were changed or other
testcases started to differ between non-Solaris and Solaris targets.
The following patch fixes that, re-syncing the affected dump files or
creating new Solaris-specific ones.
Tested on i386-pc-solaris2.11, x86_64-pc-solaris2.11,
x86_64-pc-linux-gnu, and i686-pc-linux-gnu.
PR gas/25732
* testsuite/gas/i386/solaris/x86-64-branch-2.d: New file.
* testsuite/gas/i386/solaris/x86-64-branch-3.d: New file.
* testsuite/gas/i386/solaris/x86-64-jump.d: Incorporate changes to
testsuite/gas/i386/x86-64-jump.d.
* gas/testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d:
Incorporate changes to
gas/testsuite/gas/i386/x86-64-mpx-branch-1.d.
* testsuite/gas/i386/solaris/x86-64-mpx-branch-2.d : Incorporate
changes to testsuite/gas/i386/x86-64-mpx-branch-2.d.
* testsuite/gas/i386/x86-64-branch-2.d: Skip on *-*-solaris*.
* testsuite/gas/i386/x86-64-branch-3.d: Likewise.
When you have a Thumb only PLT then the address in the GOT for PLT0 needs to
have the Thumb bit set since the instruction used in PLTn to get there is
`ldr.w pc` which is an inter-working instruction:
the PLT sequence in question is
00000120 <foo@plt>:
120: f240 0c98 movw ip, #152 ; 0x98
124: f2c0 0c01 movt ip, #1
128: 44fc add ip, pc
12a: f8dc f000 ldr.w pc, [ip]
12e: e7fc b.n 12a <foo@plt+0xa>
Disassembly of section .text:
00000130 <bar>:
130: b580 push {r7, lr}
132: af00 add r7, sp, #0
134: f7ff fff4 bl 120 <foo@plt>
and previously the linker would generate
Hex dump of section '.got':
...
0x000101b8 40010100 00000000 00000000 10010000 @...............
Which would make it jump and transition out of thumb mode and crash since you
only have thumb mode on such cores.
Now it correctly generates
Hex dump of section '.got':
...
0x000101b8 40010100 00000000 00000000 11010000 @...............
Thanks to Amol for testing patch and to rgujju for reporting it.
bfd/ChangeLog:
PR ld/16017
* elf32-arm.c (elf32_arm_populate_plt_entry): Set LSB of the PLT0
address in the GOT if in thumb only mode.
ld/ChangeLog:
PR ld/16017
* testsuite/ld-arm/arm-elf.exp (thumb-plt-got): New.
* testsuite/ld-arm/thumb-plt-got.d: New test.
When I previously changed these offsets I had incorrectly used an offset of -2
for this Thumb2 PLT. Unfortunately because we had no tests for this PLT I had
missed that the result was incorrect.
This patch fixes the offset to PC .-4 so that it correctly addresses the
previous instruction and adds a test for this PLT stub.
bfd/ChangeLog:
* elf32-arm.c (elf32_thumb2_plt_entry): Fix PC-rel offset.
ld/ChangeLog:
* testsuite/ld-arm/arm-elf.exp (thumb-plt): New.
* testsuite/ld-arm/thumb-plt.d: New test.
* testsuite/ld-arm/thumb-plt.s: New test.
Tankut Baris Aktemur
LiliCui
H.J. Lu
Rainer Orth
Gunther Nikl
Tom de Vries
Nick Clifton
GDB Administrator
Simon Marchi
Bernd Edlinger
Tom Tromey
Tom Tromey
Tamar Christina
Hannes Domani