The DWARF reader has had some odd code since the "physname" patches landed.
In particular, these patches caused PR symtab/12707; namely, they made
it so "set print demangle off" no longer works.
This patch attempts to fix the problem. It arranges to store the
linkage name on the symbol if it exists, and it changes the DWARF
reader so that the demangled name is no longer (usually) stored in the
symbol's "linkage name" field.
c-linkage-name.exp needed a tweak, because it started working
correctly. This conforms to what I think ought to happen, so this
seems like an improvement here.
compile-object-load.c needed a small change to use
symbol_matches_search_name rather than directly examining the linkage
name. Looking directly at the name does the wrong thing for C++.
There is still some name-related confusion in the DWARF reader:
* "physname" often refers to the logical name and not what I would
consider to be the "physical" name;
* dwarf2_full_name, dwarf2_name, and dwarf2_physname all exist and
return different strings -- but this seems like at least one name
too many. For example, Fortran requires dwarf2_full_name, but other
languages do not.
* To my surprise, dwarf2_physname prefers the form emitted by the
demangler over the one that it computes. This seems backward to me,
given that the partial symbol reader prefers the opposite, and it
seems to me that this choice may perform better as well.
I didn't attempt to clean up these things. It would be good to do,
but whenever I contemplate it I get caught up in dreams of truly
rewriting the DWARF reader instead.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
PR symtab/12707:
* dwarf2/read.c (add_partial_symbol): Use the linkage name if it
exists.
(new_symbol): Likewise.
* compile/compile-object-load.c (get_out_value_type): Use
symbol_matches_search_name.
gdb/testsuite/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
PR symtab/12707:
* gdb.python/py-symbol.exp: Update expected results for
linkage_name test.
* gdb.cp/print-demangle.exp: New file.
* gdb.base/c-linkage-name.exp: Fix test.
* gdb.guile/scm-symbol.exp: Update expected results for
linkage_name test.
I noticed that an error message in compile-object-load.c mentions the
wrong symbol name. The loop just above the error is looking for
COMPILE_I_EXPR_VAL, but the error references COMPILE_I_EXPR_PTR_TYPE.
I'm checking this in as obvious. I don't have a test case -- I
noticed it because another patch I'm working on caused this error to
be thrown, but that was due to regression in my patch.
gdb/ChangeLog
2020-03-25 Tom Tromey <tom@tromey.com>
* compile/compile-object-load.c (get_out_value_type): Mention
correct symbol name in error message.
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Change-Id: I934bee70b26b8b24e1735828fb1e60fe8a05714f
This patch was inspired by a recent review that recommended using
std::string in a new implementation of the gcc_target_options gdbarch
function. It changes this function to return std::string rather than
an ordinary xmalloc'd string.
I believe this caught a latent memory leak in compile.c:get_args.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-10-15 Tom Tromey <tromey@adacore.com>
* gdbarch.h, gdbarch.c: Rebuild.
* gdbarch.sh (gcc_target_options): Change return type to
std::string.
* compile/compile.c (get_args): Update.
* nios2-tdep.c (nios2_gcc_target_options): Return std::string.
* arm-linux-tdep.c (arm_linux_gcc_target_options): Return
std::string.
* aarch64-linux-tdep.c (aarch64_linux_gcc_target_options): Return
std::string.
* arch-utils.c (default_gcc_target_options): Return std::string.
* arch-utils.h (default_gcc_target_options): Return std::string.
* s390-tdep.c (s390_gcc_target_options): Return std::string.
Change-Id: I51f61703426a323089e646da8f22320a2cafbc1f
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet
supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/',
which makes it available also on gdbserver.
gdb/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.ac: Don't check for 'dlfcn.h' (moved to
gdbsupport/common.m4).
* Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to
'gdbsupport/'.
(HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'.
* compile/compile-c-support.c: Include
'gdbsupport/gdb-dlfcn.h'.
* gdbsupport/common.m4: Check for 'dlfcn.h'.
* gdb-dlfcn.c: Move to...
* gdbsupport/gdb-dlfcn.c: ... here.
* gdb-dlfcn.h: Move to...
* gdbsupport/gdb-dlfcn.h: ... here.
gdb/gdbserver/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'.
(OBS): Add 'gdbsupport/gdb-dlfcn.o'.
* config.in: Regenerate.
* configure: Regenerate.
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
Currently some code in gdb uses build_help with N_(), like:
static const std::string compile_print_help
= gdb::option::build_help (N_("\
I believe this is incorrect. The N_ macro is used to mark text that
should end up in the message catalog, but which will be translated by
a later call to gettext.
However, in this case, there is no later call to gettext, so (if gdb
had translations), this text would remain untranslated.
Instead, I think using the ordinary _() macro is correct here.
Translators will have to know to preserve "%OPTIONS%" in the text --
but that seems both unavoidable and fine.
Tested by rebuilding as there's not much else to do.
gdb/ChangeLog
2019-08-05 Tom Tromey <tromey@adacore.com>
* compile/compile.c (_initialize_compile): Use _(), not N_().
* thread.c (_initialize_thread): Use _(), not N_().
* stack.c (_initialize_stack): Use _(), not N_().
* printcmd.c (_initialize_printcmd): Use _(), not N_().
This has no behavior change in itself, but allows a future patch
to add a function to the Python API to look up symbols in the
static block.
gdb/ChangeLog:
2019-07-24 Christian Biesinger <cbiesinger@google.com>
* compile/compile-object-load.c (compile_object_load): Pass GLOBAL_SCOPE.
* solib-spu.c (spu_lookup_lib_symbol): Pass GLOBAL_SCOPE.
* solib-svr4.c (elf_lookup_lib_symbol): Pass GLOBAL_SCOPE.
* symtab.c (lookup_global_symbol_from_objfile): Add a scope parameter.
* symtab.h (lookup_global_symbol_from_objfile): Likewise.
I touched symtab.h and was surprised to see how many files were
rebuilt. I looked into it a bit, and found that defs.h includes
gdbarch.h, which in turn includes many things.
gdbarch.h is only needed by a minority ofthe files in gdb, so this
patch removes the include from defs.h and updates the fallout.
I did "wc -l" on the files in build/gdb/.deps; this patch reduces the
line count from 139935 to 137030; so there are definitely future
build-time savings here.
Note that while I configured with --enable-targets=all, it's possible
that some *-nat.c file needs an update. I could not test all of
these. The buildbot caught a few problems along these lines.
gdb/ChangeLog
2019-07-10 Tom Tromey <tom@tromey.com>
* defs.h: Don't include gdbarch.h.
* aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h,
alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h,
ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c,
cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h,
cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c,
compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c,
cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c,
dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c,
dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c,
dwarf2expr.c, expression.h, f-lang.c, frame-base.c,
frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h,
go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c,
i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c,
linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c,
mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c,
objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c,
parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c,
record-btrace.c, record.h, regcache-dump.c, regcache.h,
riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y,
sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c,
sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c,
sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h,
target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c,
tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c,
utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c,
xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update.
* s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
The options framework series broken the build with gcc 4.8, or any
other compiler were we end up forcing -std=gnu++11, causing errors
like these:
../../binutils-gdb/gdb/compile/compile.c: In function gdb::option::option_def_group make_compile_options_def_group(compile_options*):
../../binutils-gdb/gdb/compile/compile.c:266:44: error: could not convert (const gdb::option::option_def*)(& compile_command_option_defs) from const gdb::option::option_def* to gdb::array_view<const gdb::option::option_def>
return {compile_command_option_defs, opts};
^
CXX copying.o
../../binutils-gdb/gdb/compile/compile.c:267:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
This is a C++11 vs C++14 difference -- C++14 relaxed the rules for
eliding braces.
This commit fixes it by adding the missing (in C++11) braces. Tested
with g++ 4.8.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* compile/compile.c (make_compile_options_def_group): Add braces
around array_view initializer.
* thread.c (make_thread_apply_all_options_def_group)
(make_thread_apply_all_options_def_group): Likewise.
As I was in the neighbourhood, I converted the other "compile"
subcommands to the new options framework too. Specifically, "compile
code" and "compile file".
The user-visible changes are:
- All abbreviations of "-raw" are accepted now, instead of just -r.
Obviously that means "-ra" is now accepted.
- Option completion now works.
- "compile file" did not have a completer yet, and now it knows to
complete on filenames.
- You couldn't use "compile file" with a file named "-something".
You can now, with "compile file -- -something".
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* compile/compile.c (struct compile_options): New.
(compile_flag_option_def, compile_command_option_defs)
(make_compile_options_def_group): New.
(compile_file_command): Handle options with
gdb::option::process_options.
(compile_file_command_completer): New function.
(compile_code_command): Handle options with
gdb::option::process_options.
(compile_code_command_completer): New function.
(_initialize_compiler): Install completers for "compile code" and
"compile file". Mention available options in "compile code" and
"compile code"'s help.
* completer.c (advance_to_completion_word): New, factored out from
...
(advance_to_expression_complete_word_point): ... this.
(advance_to_filename_complete_word_point): New.
* completer.h (advance_to_filename_complete_word_point): New
declaration.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.compile/compile.exp: Adjust expected output to option
processing changes.
This patch adds support for "print -option optval --", etc.
Likewise for "compile print".
We'll get:
~~~~~~
(gdb) help print
Print value of expression EXP.
Usage: print [[OPTION]... --] [/FMT] [EXP]
Options:
-address [on|off]
Set printing of addresses.
-array [on|off]
Set pretty formatting of arrays.
-array-indexes [on|off]
Set printing of array indexes.
-elements NUMBER|unlimited
Set limit on string chars or array elements to print.
"unlimited" causes there to be no limit.
-max-depth NUMBER|unlimited
Set maximum print depth for nested structures, unions and arrays.
When structures, unions, or arrays are nested beyond this depth then they
will be replaced with either '{...}' or '(...)' depending on the language.
Use "unlimited" to print the complete structure.
-null-stop [on|off]
Set printing of char arrays to stop at first null char.
-object [on|off]
Set printing of C++ virtual function tables.
-pretty [on|off]
Set pretty formatting of structures.
-repeats NUMBER|unlimited
Set threshold for repeated print elements.
"unlimited" causes all elements to be individually printed.
-static-members [on|off]
Set printing of C++ static members.
-symbol [on|off]
Set printing of symbol names when printing pointers.
-union [on|off]
Set printing of unions interior to structures.
-vtbl [on|off]
Set printing of C++ virtual function tables.
Note: because this command accepts arbitrary expressions, if you
specify any command option, you must use a double dash ("--")
to mark the end of option processing. E.g.: "print -o -- myobj".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I want to highlight the comment above about "--".
At first, I thought we could make the print command parse the options,
and if the option wasn't recognized, fallback to parsing as an
expression. Then, if the user wanted to disambiguate, he'd use the
"--" option delimiter. For example, if you had a variable called
"object" and you wanted to print its negative, you'd have to do:
(gdb) print -- -object
After getting that working, I saw that gdb.pascal/floats.exp
regressed, in these tests:
gdb_test "print -r" " = -1\\.2(499.*|5|500.*)"
gdb_test "print -(r)" " = -1.2(499.*|5|500.*)"
gdb_test "print -(r + s)" " = -3\\.4(499.*|5|500.*)"
It's the first one that I found most concerning. It regressed because
"-r" is the abbreviation of "-raw". I realized then that the behavior
change was a bit risker than I'd like, considering scripts, wrappers
around gdb, etc., and even user expectation. So instead, I made the
print command _require_ the "--" options delimiter if you want to
specify any option. So:
(gdb) print -r
is parsed as an expression, and
(gdb) print -r --
is parsed as an option.
I noticed that that's also what lldb's expr (the equivalent of print)
does to handle the same problem.
Going back the options themselves, note that:
- you can shorten option names, as long as unambiguous.
- For boolean options, 0/1 stand for off/on.
- For boolean options, "true" is implied.
So these are all equivalent:
(gdb) print -object on -static-members off -pretty on -- foo
(gdb) print -object -static-members off -pretty -- foo
(gdb) print -object -static-members 0 -pretty -- foo
(gdb) print -o -st 0 -p -- foo
TAB completion is fully supported:
(gdb) p -[TAB]
-address -elements -pretty -symbol
-array -null-stop -repeats -union
-array-indexes -object -static-members -vtbl
Note that the code is organized such that some of the options and the
"set/show" commands code is shared. In particular, the "print"
options and the corresponding "set print" commands are defined with
the same structures. The commands are installed with the
gdb::option::add_setshow_cmds_for_options function.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* compile/compile.c: Include "cli/cli-option.h".
(compile_print_value): Scope data pointer is now a
value_print_options pointer; adjust.
(compile_print_command): Process options. Scope data pointer is
now a value_print_options pointer; adjust.
(_initialize_compile): Update "compile print"'s help to include
supported options. Install a completer for "compile print".
* cp-valprint.c (show_vtblprint, show_objectprint)
(show_static_field_print): Delete.
(_initialize_cp_valprint): Don't install "set print
static-members", "set print vtbl", "set print object" here.
* printcmd.c: Include "cli/cli-option.h" and
"common/gdb_optional.h".
(print_command_parse_format): Rework to fill in a
value_print_options instead of a format_data.
(print_value): Change parameter type from format_data pointer to
value_print_options reference. Adjust.
(print_command_1): Process options. Adjust to pass down a
value_print_options.
(print_command_completer): New.
(_initialize_printcmd): Install print_command_completer as
handle_brkchars completer for the "print" command. Update
"print"'s help to include supported options.
* valprint.c: Include "cli/cli-option.h".
(show_vtblprint, show_objectprint, show_static_field_print): Moved
here from cp-valprint.c.
(boolean_option_def, uinteger_option_def)
(value_print_option_defs, make_value_print_options_def_group):
New. Use gdb::option::add_setshow_cmds_for_options to install
"set print elements", "set print null-stop", "set print repeats",
"set print pretty", "set print union", "set print array", "set
print address", "set print symbol", "set print array-indexes".
* valprint.h: Include <string> and "cli/cli-option.h".
(make_value_print_options_def_group): Declare.
(print_value): Change parameter type from format_data pointer to
value_print_options reference.
(print_command_completer): Declare.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/options.exp: Build executable.
(test-print): New procedure.
(top level): Call it, once for "print" and another for "compile
print".
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
This changes compile_cplus_convert_enum to use "false".
Note that this variable is never modified, which seems like an error.
I filed PR compile/24473 for this.
gdb/ChangeLog
2019-05-04 Tom Tromey <tom@tromey.com>
* compile/compile-cplus-types.c (compile_cplus_convert_enum): Use
"false".
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
This series is revisit of Siddhesh Poyarekar's patch from back in
2012. The last status on the patch is in the following gdb-patches
thread:
https://sourceware.org/ml/gdb-patches/2012-08/msg00562.html
It appears that Tom approved the patch, but Jan had some issues
with a compiler error that made the test fail on -m32 test runs.
He wrote up a hand-tweaked .S file to deal with it. Siddesh said
he would update tests. Then nothing.
Siddesh and Jan have both moved on since.
The patch originally required a large precursor patch to work.
I have whittled this down to/rewritten the bare minimum, and this
first patch is the result, changing the type of TYPE_LENGTH
to ULONGEST from unsigned int.
The majority of the changes involve changing printf format
strings to use %s and pulongest instead of %d.
gdb/ChangeLog:
* ada-lang.c (ada_template_to_fixed_record_type_1): Use
%s/pulongest for TYPE_LENGTH instead of %d in format
strings.
* ada-typerint.c (ada_print_type): Likewise.
* amd64-windows-tdep.c (amd64_windows_store_arg_in_reg): Likewise.
* compile/compile-c-support.c (generate_register_struct): Likewise.
* gdbtypes.c (recursive_dump_type): Likewise.
* gdbtypes.h (struct type) <length>: Change type to ULONGEST.
* m2-typeprint.c (m2_array): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* riscv-tdep.c (riscv_type_alignment): Cast second argument
to std::min to ULONGEST.
* symmisc.c (print_symbol): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* tracepoint.c (info_scope_command): Likewise.
* typeprint.c (print_offset_data::update)
(print_offset_data::finish): Likewise.
* xtensa-tdep.c (xtensa_store_return_value)
(xtensa_push_dummy_call): Likewise.
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
The include sorter can't handle multi-line comments on the same line
as a #include. This patch removes the only such comment.
In general I think these sorts of comments do not provide much value:
more often than not, I find that the comment is obsolete in one way or
another, and so the include sorter removes them in most cases.
gdb/ChangeLog
2019-01-22 Tom Tromey <tom@tromey.com>
* compile/compile-cplus-types.c: Remove a comment by #include.
gcc-c-plugin.h refers to some types defined in compile-internal.h.
This patch changes the former to include the latter.
gdb/ChangeLog
2019-01-22 Tom Tromey <tom@tromey.com>
* compile/gcc-c-plugin.h: Include compile-internal.h.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
I noticed a few places where a Usage line in gdb did not use upper
case for metasyntactic variables. This patch fixes all the instances
I found.
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2019-01-04 Tom Tromey <tom@tromey.com>
* compile/compile.c (_initialize_compile): Use upper case for
metasyntactic variables.
* symmisc.c (_initialize_symmisc): Use upper case for
metasyntactic variables.
* psymtab.c (_initialize_psymtab): Use upper case for
metasyntactic variables.
* demangle.c (demangle_command): Use upper case for metasyntactic
variables.
(_initialize_demangler): Likewise.
* ax-gdb.c (_initialize_ax_gdb): Use upper case for metasyntactic
variables.
This patch changes cp-support.c:cp_func_name to return a
'gdb::unique_xmalloc_ptr<char>' instead of a 'char *'. This allows a
cleanup to be removed from valops.c:find_overload_match.
gdb/ChangeLog:
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Handle changes to
cp_func_name.
* cp-support.c (cp_func_name): Update header comment, update
return type.
* cp-support.h (cp_func_name): Update return type in declaration.
* valops.c (find_overload_match): Move temp_func local to top
level of function and change its type. Use temp_func to hold and
delete temporary string obtained from cp_func_name.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This replaces a few uses of pointer+length with gdb::array_view, in
call_function_by_hand and related code.
Unfortunately, due to -Wnarrowing, there are places where we can't
brace-initialize an gdb::array_view without an ugly-ish cast. To
avoid the cast, this patch introduces a gdb::make_array_view function.
Unit tests included.
This patch in isolation may not look so interesting, due to
gdb::make_array_view uses, but I think it's still worth it. Some of
the gdb::make_array_view calls disappear down the series, and others
could be eliminated with more (non-trivial) gdb::array_view
detangling/conversion (e.g. code around eval_call). See this as a "we
have to start somewhere" patch.
gdb/ChangeLog:
2018-11-21 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_evaluate_subexp): Adjust to pass an array_view.
* common/array-view.h (make_array_view): New.
* compile/compile-object-run.c (compile_object_run): Adjust to
pass an array_view.
* elfread.c (elf_gnu_ifunc_resolve_addr): Adjust.
* eval.c (eval_call): Adjust to pass an array_view.
(evaluate_subexp_standard): Adjust to pass an array_view.
* gcore.c (call_target_sbrk): Adjust to pass an array_view.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* infcall.c (push_dummy_code): Replace pointer + size parameters
with an array_view parameter.
(call_function_by_hand, call_function_by_hand_dummy): Likewise and
adjust.
* infcall.h: Include "common/array-view.h".
(call_function_by_hand, call_function_by_hand_dummy): Replace
pointer + size parameters with an array_view parameter.
* linux-fork.c (inferior_call_waitpid): Adjust to use array_view.
* linux-tdep.c (linux_infcall_mmap): Likewise.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring, print_object_command): Likewise.
* python/py-value.c (valpy_call): Likewise.
* rust-lang.c (rust_evaluate_funcall): Likewise.
* spu-tdep.c (flush_ea_cache): Likewise.
* valarith.c (value_x_binop, value_x_unop): Likewise.
* valops.c (value_allocate_space_in_inferior): Likewise.
* unittests/array-view-selftests.c (run_tests): Add
gdb::make_array_view test.
Building with mingw currently fails:
CXX unittests/mkdir-recursive-selftests.o
/home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c: In function ‘void selftests::mkdir_recursive::test()’:
/home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c:49:20: error: ‘mkdtemp’ was not declared in this scope
if (mkdtemp (base) == NULL)
^
Commit
e418a61a67 ("Move mkdir_recursive to common/filestuff.c")
moved this code, but also removed the HAVE_MKDTEMP guard which prevented
the mkdtemp call to be compiled on mingw.
We can either put back the HAVE_MKDTEMP ifdef, or import the gnulib
mkdtemp module, which provides the function for mingw. Since the
mkdir_recursive is susceptible to be used on mingw at some point, I
think it would be nice to have it tested on mingw, so I did the latter.
Once built, I tested it on Windows (copied the resulting gdb.exe on a
Windows machine, ran it, and ran "maint selftest mkdir_recursive"). It
failed, because the temporary directory is hardcoded to "/tmp/...". I
therefore added and used a new get_standard_temp_dir function, which
returns an appropriate temporary directory for the host platform.
gdb/ChangeLog:
* common/pathstuff.c (get_standard_temp_dir): New.
* common/pathstuff.h (get_standard_temp_dir): New.
* config.in: Re-generate.
* configure: Re-generate.
* configure.ac: Don't check for mkdtemp.
* gnulib/aclocal-m4-deps.mk: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.am: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
* gnulib/import/m4/gnulib-cache.m4: Re-generate.
* gnulib/import/m4/gnulib-comp.m4: Re-generate.
* gnulib/import/m4/mkdtemp.m4: New file.
* gnulib/import/mkdtemp.c: New file.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES):
Add mkdtemp module.
* unittests/mkdir-recursive-selftests.c (test): Use
get_standard_temp_dir.
(_initialize_mkdir_recursive_selftests): Remove HAVE_MKDTEMP
ifdef.
* compile/compile.c (get_compile_file_tempdir): Likewise.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
This removes the remaining cleanups from compile-object-load.c.
gdb/ChangeLog
2018-09-18 Tom Tromey <tom@tromey.com>
* compile/compile-object-load.c (struct
link_hash_table_cleanup_data): Add constructor and destructor.
Use DISABLE_COPY_AND_ASSIGN.
(~link_hash_table_cleanup_data): Rename from
link_hash_table_free. Now a destructor.
(copy_sections): Use gdb::unique_xmalloc_ptr. Remove cleanups.
This removes munmap_listp_free_cleanup, replacing it with a
std::unique_ptr at one spot and an explicit delete in another. It
seemed simplest to completely change this data structure.
gdb/ChangeLog
2018-09-18 Tom Tromey <tom@tromey.com>
* compile/compile-object-run.c (do_module_cleanup): Use delete.
* compile/compile-object-load.c (struct munmap_list): Move to
header file.
(munmap_list::add): Rename from munmap_list_add; rewrite.
(munmap_list::~munmap_list): Rename from munmap_list_free.
(munmap_listp_free_cleanup): Remove.
(compile_object_load): Update.
* compile/compile-object-load.h (struct munmap_list): Move from
compile-object-load.c. Rewrite.
Patch
d82b3862f1 ("compile: Remove non-const reference parameters")
introduced a regression in compile/compile-cplus-types.c. The new_scope
variable in compile_cplus_instance::enter_scope is used after it was
std::moved. This patch fixes it by referring to the back of the vector
where it was moved instead.
gdb/ChangeLog:
* compile/compile-cplus-types.c
(compile_cplus_instance::enter_scope): Don't use new_scope after
std::move.
Since commit
56bcdbea2b ("Let gdb.execute handle multi-line commands")
trying to use a command like gdb.execute("show commands") in Python
fails. GDB ends up trying to run the "commands" command.
The reason is that GDB gets confused with the special "commands"
command. In process_next_line, the lookup_cmd_1 function returns the
cmd_list_element representing the "commands" sub-command of "show".
Lower, we check the cmd_list_element to see if it matches various
control commands by name, including the "commands" command. This is
where we wrongfully conclude that the executed command must be
"commands", when in reality it was "show commands".
The fix proposed in this patch removes the comparisons by name, instead
comparing the cmd_list_element object by pointer with the objects
created at initialization time.
Tested on the buildbot, though on a single builder (Fedora-x86_64-m64).
gdb/ChangeLog:
PR python/23669
* breakpoint.c (commands_cmd_element): New.
(_initialize_breakpoint): Assign commands_cmd_element.
* breakpoint.h (commands_cmd_element): New.
* cli/cli-script.c (while_cmd_element, if_command,
define_cmd_element): New.
(command_name_equals): Remove.
(process_next_line): Compare commands by pointer, not by name.
(_initialize_cli_script): Assign the various cmd_list_element
variables.
* compile/compile.c (compile_cmd_element): New.
(_initialize_compile): Assign compile_cmd_element.
* compile/compile.h (compile_cmd_element): New.
* guile/guile.c (guile_cmd_element): New.
(install_gdb_commands): Assign guile_cmd_element.
* guile/guile.h (guile_cmd_element): New.
* python/python.c (python_cmd_element): New.
(_initialize_python): Assign python_cmd_element.
* python/python.h (python_cmd_element): New.
* tracepoint.c (while_stepping_cmd_element): New.
(_initialize_tracepoint): Assign while_stepping_cmd_element.
* tracepoint.h (while_stepping_cmd_element): New.
gdb/testsuite/ChangeLog:
PR python/23669
* gdb.python/python.exp: Test gdb.execute("show commands").
This changes gdb_bfd_errmsg to return a std::string, removing a
cleanup. This approach may be slightly less efficient than the
previous code, but I don't believe this is very important in this
situation.
gdb/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
* utils.h (gdb_bfd_errmsg): Return std::string.
* exec.c (exec_file_attach): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* utils.c (gdb_bfd_errmsg): Return std::string.
This patch fixes two violations of the ARI (use of ATTRIBUTE_UNUSED and
"%ll").
gdb/ChangeLog
* compile/compile-cplus-types.c (compile_cplus_debug_output_1): Use
pulongest instead of "%lld".
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol): Remove
ATTRIBUTE_UNUSED.
I see these errors when building with clang:
CXX compile/compile-cplus-types.o
/home/emaisin/src/binutils-gdb/gdb/compile/compile-cplus-types.c:306:56: error: cannot pass non-trivial object of type 'compile_scope' to variadic function; expected type from format string was 'void *' [-Wnon-pod-varargs]
fprintf_unfiltered (gdb_stdlog, "leaving scope %p\n", current);
~~ ^~~~~~~
/home/emaisin/src/binutils-gdb/gdb/compile/compile-cplus-types.c:1058:13: error: comparison of two values with different enumeration types ('enum_flags<gcc_cp_qualifiers>::enum_type' (aka 'gcc_cp_qualifiers') and 'gcc_cp_ref_qualifiers') [-Werror,-Wenum-compare]
if (quals != GCC_CP_REF_QUAL_NONE)
~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~
Fix the first one by using host_address_to_string.
Fix the second one by comparing to 0 instead. I think the current
comparison simply uses the wrong enum type. Comparing to 0 seems like
the right thing to do, because we want to check whether any flags are
specified.
gdb/ChangeLog:
* compile/compile-cplus-types.c
(compile_cplus_instance::leave_scope): Take the address of scope
object.
(compile_cplus_instance::convert_qualified_base): Compare quals
to 0.