This patch removes some manual reference count manipulation by
changing last_examine_value to be a value_ref_ptr and then updating
the users.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* printcmd.c (last_examine_address): Change type to
value_ref_ptr.
(do_examine, x_command): Update.
Now that value_ref_ptr exists, it is possible to simplify breakpoint
and bpstat memory management by using a value_ref_ptr rather than
manually handling the reference counts.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (release_value): Update.
* breakpoint.h (struct watchpoint) <val>: Now a value_ref_ptr.
(struct bpstats) <val>: Now a value_ref_ptr.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, print_it_watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
struct value is internally reference counted and so, while it also has
some ownership rules unique to it, it makes sense to use a gdb_ref_ptr
when managing it automatically.
This patch removes the existing unique_ptr specialization in favor of
a reference-counted pointer. It also introduces two other
clarifications:
1. Rename value_free to value_decref, which I think is more in line
with what the function actually does; and
2. Change release_value to return a gdb_ref_ptr. This change allows
us to remove the confusing release_value_or_incref function,
primarily by making it much simpler to reason about the result of
release_value.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_clear_saved_item)
(update_dynamic_varobj_children, install_new_value, ~varobj):
Update.
* value.h (value_incref): Move declaration earlier.
(value_decref): Rename from value_free.
(struct value_ref_policy): New.
(value_ref_ptr): New typedef.
(struct value_deleter): Remove.
(gdb_value_up): Remove typedef.
(release_value): Change return type.
(release_value_or_incref): Remove.
* value.c (set_value_parent): Update.
(value_incref): Change return type.
(value_decref): Rename from value_free.
(value_free_to_mark, free_all_values, free_value_chain): Update.
(release_value): Return value_ref_ptr.
(release_value_or_incref): Remove.
(record_latest_value, set_internalvar, clear_internalvar):
Update.
* stack.c (info_frame_command): Don't call value_free.
* python/py-value.c (valpy_dealloc, valpy_new)
(value_to_value_object): Update.
* printcmd.c (do_examine): Update.
* opencl-lang.c (lval_func_free_closure): Update.
* mi/mi-main.c (register_changed_p): Don't call value_free.
* mep-tdep.c (mep_frame_prev_register): Don't call value_free.
* m88k-tdep.c (m88k_frame_prev_register): Don't call value_free.
* m68hc11-tdep.c (m68hc11_frame_prev_register): Don't call
value_free.
* guile/scm-value.c (vlscm_free_value_smob)
(vlscm_scm_from_value): Update.
* frame.c (frame_register_unwind, frame_unwind_register_signed)
(frame_unwind_register_unsigned, get_frame_register_bytes)
(put_frame_register_bytes): Don't call value_free.
* findvar.c (address_from_register): Don't call value_free.
* dwarf2read.c (dwarf2_compute_name): Don't call value_free.
* dwarf2loc.c (entry_data_value_free_closure)
(value_of_dwarf_reg_entry, free_pieced_value_closure)
(dwarf2_evaluate_loc_desc_full): Update.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
* alpha-tdep.c (alpha_register_to_value): Don't call value_free.
As shown in PR 23022, building with clang-6 and Python 2 trips on the
fact that the Python 2 headers use the "register" keyword:
/usr/include/python2.7/unicodeobject.h:534:5: error: 'register' storage class specifier is deprecated and incompatible with C++17 [-Werror,-Wdeprecated-register]
register PyObject *obj, /* Object */
^~~~~~~~~
This patch adds -Wno-error=deprecated-register to our flags, so that we can
still see this class of warnings, but they don't cause a build failure.
gdb/ChangeLog:
PR gdb/23022
* warning.m4: Add -Wno-error=deprecated-register.
* configure: Re-generate.
I happened to notice that objdump was not printing "Rust" when showing
the DW_AT_language for a CU:
<10> DW_AT_language : 28 (Unknown: 1c)
This patch adds all the new language constants from DWARF 5 to
binutils/dwarf.c.
2018-04-06 Tom Tromey <tom@tromey.com>
* dwarf.c (read_and_display_attr_value): Add missing DW_LANG
constants from DWARF 5.
R_X86_64_converted_reloc_bit is set in elf_x86_64_convert_load_reloc
which is called from elf_x86_64_check_relocs. Since it is used only
internally by linker, there is no need to mask it out in
elf_x86_64_info_to_howto.
* elf64-x86-64.c (elf_x86_64_info_to_howto): Don't mask out
R_X86_64_converted_reloc_bit.
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
bfd/
PR gas/22318
* configure: Regenerated.
binutils/
PR gas/22318
* configure: Regenerated.
gas/
PR gas/22318
* configure: Regenerated.
gprof/
PR gas/22318
* configure: Regenerated.
ld/
PR gas/22318
* configure: Regenerated.
Sync with GCC
2018-04-05 H.J. Lu <hongjiu.lu@intel.com>
PR gas/22318
* plugins.m4 (AC_PLUGINS): Use dlsym to check if libdl is needed.
2018-02-14 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
PR target/84148
* cet.m4: Check if target support multi-byte NOPS (SSE).
Fix a typo: `.dc.w' -> `.dc.l' in `strip-13mips64.s', correcting a bug
from commit 2f8ceb38991e ("binutils/testsuite: Support REL and MIPS64
reloc formats with `strip-13'"). For relocation format correctness only
as there is no observable change in test results due to the lack of
connection between the second relocation entry affected and the examined
error message produced.
binutils/
* testsuite/binutils-all/strip-13mips64.s: Use `.dc.l' rather
than `.dc.w' in second relocation.
The record_got_page_entry function records and updates the maximum
number of GOT page entries which may be required by an object. In the
case where an existing GOT page entry was expanded, only the entry
belonging to output GOT would have its page count updated. This leaves
the entry belonging to the object GOT with the num_pages count of 1 it
was originally initialized with. Later on when GOTs are being merged in a
multi-got link, this causes the value of entry->num_pages in
add_got_page_entries to always be 1 and underestimates the number of pages
required for the new entry. This in turn leads to an assertion failure in
get_got_page_offset where we run out of pages.
Fix by obtaining the object's GOT entry unconditionally and not just
the first time it gets created. Now that entry2 is always valid, remove
the useless NULL checks.
gold/
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Fetch existing
page entries for the object's GOT.
PR 23030
* emulparams/elf64_ia64.sh (OTHER_READONLY_SECTIONS): Make sure
that the .IA_64.unwind_info and .IA_64.unwind sections are not
subject to garbage collection.
linespec.h was inculding vec.h, but doesn't expose any VECs.
So, this include can be removed.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.h: Remove include of "vec.h".
This removes VEC(typep) from linespec.c in favor of std::vector. It
also removes the "typep" typedef. This change allowed the removal of
some cleanups.
I believe the previous cleanup code in find_superclass_methods could
result in a memory leak, so this patch is an improvement in that way
as well.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.c (typep): Remove typedef.
(find_methods, find_superclass_methods): Take a std::vector.
(find_method): Use std::vector.
This changes some spots in linespec.c to take a std::vector. This
patch spilled out to objc-lang.c a bit as well. This change allows
for the removal of some cleanups.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* utils.c (compare_strings): Remove.
* utils.h (compare_strings): Remove.
* objc-lang.h (find_imps): Update.
* objc-lang.c (find_methods): Take a std::vector.
(uniquify_strings, find_imps): Likewise.
* linespec.c (find_methods): Take a std::vector.
(decode_objc): Use std::vector.
(add_all_symbol_names_from_pspace, find_superclass_methods): Take
a std::vector.
(find_method, find_function_symbols): Use std::vector.
I wanted to use streq with std::unique in another (upcoming) patch in
this seres, so I changed it to return bool. To my surprise, this lead
to regressions. The cause turned out to be that streq was used as an
htab callback -- by casting it to the correct function type. This
sort of cast is invalid, so this patch adds a variant which is
directly suitable for use by htab. (Note that I did not add an
overload, as I could not get that to work with template deduction in
the other patch.)
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* completer.c (completion_tracker::completion_tracker): Remove
cast.
(completion_tracker::discard_completions): Likewise.
* breakpoint.c (ambiguous_names_p): Remove cast.
* ada-lang.c (_initialize_ada_language): Remove cast.
* utils.h (streq): Update.
(streq_hash): Add new declaration.
* utils.c (streq): Return bool.
(streq_hash): New function.
The use of "const" showed that a string copy in event_location_to_sals
was unnecessary. This patch removes it.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.c (event_location_to_sals) <case ADDRESS_LOCATION>:
Remove a string copy.
This chagnes filter_results to take a std::vector, allowing the
removal of some cleanups in its callers.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.c (filter_results): Use std::vector.
(decode_line_2, decode_line_full): Update.
This changes canonical_to_fullform to return a std::string, and
changes decode_line_2 to use std::vector. This allows for the removal
of some cleanups.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.c (canonical_to_fullform): Return std::string.
(filter_results): Update.
(struct decode_line_2_item): Add constructor.
<fullform, displayform>: Now std::string.
(decode_line_2_compare_items): Now a std::sort comparator.
(decode_line_2): Update.
This changes copy_token_string to return a unique_xmalloc_ptr, which
allows the removal of some cleanups.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.c (copy_token_string): Return a unique_xmalloc_ptr.
(unexpected_linespec_error): Update.
(linespec_parse_basic, parse_linespec): Update.
This removes some leftover comments and fixes the indentation in a
couple of spots in linespec.c.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* linespec.c (linespec_parse_basic): Reindent.
This changes struct collect_minsyms to use a std::vector, which
enables the removal of a cleanup from search_minsyms_for_name. This
also changes iterate_over_minimal_symbols to take a
gdb::function_view, which makes a function in linespec.c more
type-safe.
ChangeLog
2018-04-05 Tom Tromey <tom@tromey.com>
* minsyms.h (iterate_over_minimal_symbols): Update.
* minsyms.c (iterate_over_minimal_symbols): Take a
gdb::function_view.
* linespec.c (struct collect_minsyms): Remove.
(compare_msyms): Now a std::sort comparator.
(add_minsym): Add parameters.
(search_minsyms_for_name): Update. Use std::vector.
Avoid false positives and actually verify both that an `unsupported
relocation type 0x8f' message is produced and that no other message is,
except for the final `bad value', in the `strip-13' test. This ensures
that it is a relocation processing error and not a different issue that
has caused `strip' to terminate unsuccessfully, and that the number
representing the unsupported relocation has not been clobbered.
binutils/
* testsuite/binutils-all/strip-13.d: Also expect `unsupported
relocation type 0x8f' error message.
Add source variants for the `strip-13' test that produce relocations in
the REL and MIPS64 formats, fixing a failure for the `mips64el-openbsd'
target. This also corrects output for `i*86-*', `i960-*', `m6812-*' and
`m68hc12-*', o32 `mips*-*', and `score*-*' targets, which however does
not show up as a test result change due to lax error message matching
causing `bad value' previously produced by `strip' as a result of input
file rejection to be accepted as a test pass.
For `m6811-*' aka `m68hc11-*' targets this causes a phantom regression,
because they use 16-bit addressing and therefore `.dc.a' emits 16-bit
quantities causing relocation data constructed in assembly not to be as
expected. Previously input was rejected by `strip' with a `bad value'
message and now it is accepted, however due to the relocation data error
the relocation number is not one of the unsupported ones and the tool
completes successfully, which scores as a test failure.
Disable the test case for `m6811-*' and `m68hc11-*' targets then, as it
is a test case bug rather than a problem with the relevant backend. A
separate change to the test case is required to correct this problem, at
which point the test case can be enabled for the affected targets.
binutils/
* testsuite/binutils-all/strip-13.s: Rename to...
* testsuite/binutils-all/strip-13rela.s: ... this.
* testsuite/binutils-all/strip-13rel.s: New test source.
* testsuite/binutils-all/strip-13mips64.s: New test source.
* testsuite/binutils-all/strip-13.d: Remove `arm-*', `d10v-*',
`dlx-*' and `xgate-*' from `not-target' list. Add `m6811-*' and
`m68hc11-*' to `not-target' list.
* testsuite/binutils-all/objcopy.exp: Switch between sources for
`strip-13'.
Based on relocations defined in include/elf/*.h files we have relocation
numbers: 143, 159, 214 and 215 currently not used by any of our ELF
targets. Use 143 then instead of 241 to enable the `strip-13' test for
`hppa*-*' targets. It has a side effect with some targets of verifying
that unused relocations whose numbers are below the respective R_*_max
value are handled correctly.
binutils/
* testsuite/binutils-all/strip-13.s: Use 143 (0x8f) rather than
241 (0xf1) for the relocation number and RELA addend.
* testsuite/binutils-all/strip-13.d: Remove `hppa*-*' from the
`not-target' list.
"vex" has many fields to control how to decode an instruction. Clear
all fields in "vex" before decoding an instruction to avoid using values
left from the previous instruction.
gas/
PR binutils/23025
* testsuite/gas/i386/prefix.s: Add tests for vcvtpd2dq with
VEX and EVEX prefixes.
* testsuite/gas/i386/prefix.d: Updated.
opcodes/
PR binutils/23025
* i386-dis.c (get_valid_dis386): Don't set vex.prefix nor vex.w
to 0.
(print_insn): Clear vex instead of vex.evex.
This patch deals with the generation of the import library on the fly.
The implementation is inefficient because the linker makes a lot of
calls to realloc and memmove when importing the symbols in order to
maintain a sorted list of symbols.
This is fixable by relying on the fact that, for every linked DLL,
the list of symbols it exports is already sorted so you can import
them en masse once you have found the insertion point.
ld/
* deffile.h (def_file_add_import_from): Declare.
(def_file_add_import_at): Likewise.
* deffilep.y (fill_in_import): New function extracted from...
(def_file_add_import): ...here. Call it.
(def_file_add_import_from): New function.
(def_file_add_import_at): Likewise.
* pe-dll.c (pe_implied_import_dll): Use an optimized version of the
insertion loop for imported symbols if possible.
This patch deals with the auto-import feature. There are 2 versions
of this feature: the original one, which was piggybacked on the OS
loader with an optional help from the runtime (--enable-auto-import
--enable-runtime-pseudo-reloc-v1) and is still the one mostly
documented in the sources and manual; the enhanced one by Kai Tietz,
which is entirely piggybacked on the runtime (--enable-auto-import
--enable-runtime-pseudo-reloc-v2) and is the default for Mingw and
Cygwin nowadays.
The implementation is inefficient because of pe[p]_find_data_imports:
for every undefined symbol, the function walks the entire set of
relocations for all the input files and does a direct name comparison
for each of them.
This is easily fixable by using a hash-based map for v1 and a simple
hash table for v2. This patch leaves v1 alone and only changes v2.
It also factors out pe[p]_find_data_imports into a common function,
removes old cruft left and right, and attempts to better separate
the implementations of v1 and v2 in the code.
ld/
* emultempl/pe.em (U_SIZE): Delete.
(pe_data_import_dll): Likewise.
(make_import_fixup): Return void, take 4th parameter and pass it down
in call to pe_create_import_fixup.
(pe_find_data_imports): Move to...
(gld_${EMULATION_NAME}_after_open): Run the stdcall fixup pass after
the auto-import pass and add a guard before running the latter.
* emultempl/pep.em (U_SIZE): Delete.
(pep_data_import_dll): Likewise.
(make_import_fixup): Return void, take 4th parameter and pass it down
in call to pe_create_import_fixup.
(pep_find_data_imports): Move to...
(gld_${EMULATION_NAME}_after_open): Run the stdcall fixup pass after
the auto-import pass and add a guard before running the latter.
* pe-dll.c (runtime_pseudp_reloc_v2_init): Change type to bfd_boolean.
(pe_walk_relocs_of_symbol): Rename into...
(pe_walk_relocs): ...this. Add 2 more parameters,4th parameter to the
callback prototype and pass 4th parameter in calls to the callback.
If the import hash table is present, invoke the callback on the reloc
if the symbol name is in the table.
(pe_find_data_imports): ...here. Take 2 parameters. Build an import
hash table for the pseudo-relocation support version 2. When it is
built, walk the relocations only once at the end; when it is not, do
not build a fixup when the symbol isn't part of an import table.
Issue the associated warning only after a first fixup is built.
(tmp_seq2): Delete.
(make_singleton_name_imp): Likewise.
(make_import_fixup_mark): Return const char * and a stable string.
(make_import_fixup_entry): Do not deal with the pseudo-relocation
support version 2.
(make_runtime_pseudo_reloc): Factor out code and fix formatting.
(pe_create_import_fixup): Add 5th parameter. Clearly separate the
pseudo-relocation support version 2 from the rest. Fix formatting.
* pe-dll.h (pe_walk_relocs_of_symbol): Delete.
(pe_find_data_imports): Declare.
(pe_create_import_fixup): Add 5th parameter.
* pep-dll.c (pe_data_import_dll): Delete.
(pe_find_data_imports): Define.
(pe_walk_relocs_of_symbol): Delete.
* pep-dll.h (pep_walk_relocs_of_symbol): Delete.
(pep_find_data_imports): Declare.
(pep_create_import_fixup): Add 5th parameter.
* ld.texinfo (--enable-auto-import): Adjust to new implementation.
Do not consider R_PARISC_UNIMPLEMENTED placeholder relocation entries of
the `elf_hppa_howto_table' table valid in `info_to_howto' HPPA handlers.
Instead issue an unsupported relocation type error and return a NULL
howto as with relocations whose number is R_PARISC_UNIMPLEMENTED or
beyond.
bfd/
* elf-hppa.h (elf_hppa_info_to_howto): Also return
unsuccessfully for unimplemented relocations.
(elf_hppa_info_to_howto_rel): Likewise.
Complement commit f3185997ac09 ("PR 22875: Stop strip corrupting unknown
relocs"), <https://sourceware.org/ml/binutils/2018-02/msg00445.html>,
and also set the `bfd_error_bad_value' error and report an unsupported
relocation type if a howto lookup fails with the i860 backend, fixing a
confusing `no error' error message and removing a binutils test failure:
failed with: <.../binutils/strip-new: tmpdir/bintest.o: no error>, expected: <.* bad value>
.../binutils/strip-new: tmpdir/bintest.o: no error
FAIL: binutils-all/strip-13
with the `i860-stardent-elf' target.
bfd/
* elf32-i860.c (lookup_howto): Add `abfd' parameter. Set the
`bfd_error_bad_value' error and call `_bfd_error_handler' on a
howto lookup failure.
(elf32_i860_reloc_type_lookup): Adjust `lookup_howto' call
accordingly.
(elf32_i860_info_to_howto_rela): Likewise.
(elf32_i860_relocate_splitn): Likewise.
(elf32_i860_relocate_pc16): Likewise.
(elf32_i860_relocate_pc26): Likewise.
(elf32_i860_relocate_section): Likewise.
Prevent an out-of-bounds `visium_elf_howto_table' table access in
`visium_info_to_howto_rela' by using the size of the table rather than
R_VISIUM_max to determine the number of entries in the contiguous
regular Visium relocation range defined and described in the table.
bfd/
* elf32-visium.c (visium_info_to_howto_rela): Correct the range
check for `visium_elf_howto_table' table access.
Prevent an out-of-bounds `iq2000_elf_howto_table' table access in
`iq2000_info_to_howto_rela' by using the size of the table rather than
R_IQ2000_max to determine the number of entries in the contiguous
regular IQ2000 relocation range defined and described in the table.
bfd/
* elf32-iq2000.c (iq2000_info_to_howto_rela): Correct the range
check for `iq2000_elf_howto_table' table access.
Prevent an out-of-bounds `elf32_frv_howto_table' table access in
`frv_info_to_howto_rela' by using the size of the table rather than
R_FRV_max to determine the number of entries in the contiguous regular
FRV relocation range defined and described in the table.
bfd/
* elf32-frv.c (frv_info_to_howto_rela): Correct the range check
for `elf32_frv_howto_table' table access.
Do not consider placeholder EMPTY_HOWTO relocation entries valid in
`rtype_to_howto' MIPS handlers. Instead issue an unsupported relocation
type error and return a NULL howto as with relocations outside the three
ISA-specific min-max ranges.
bfd/
* elf32-mips.c (mips_elf32_rtype_to_howto): Also return
unsuccessfully for placeholder howtos.
* elf64-mips.c (mips_elf64_rtype_to_howto): Likewise.
* elfn32-mips.c (mips_elf_n32_rtype_to_howto): Likewise.
This changes read_alphacoff_dynamic_symtab to use gdb::byte_vector.
This allows for the removal of some cleanups.
Tested by the buildbot; though I don't know whether this code path is
ever actually run.
gdb/ChangeLog
2018-04-03 Tom Tromey <tom@tromey.com>
* mipsread.c (read_alphacoff_dynamic_symtab): Use
gdb::byte_vector.
Complement commit 86b24e15c45b ("MIPS/LD/testsuite: Correct
comm-data.exp test ABI/emul/endian arrangement") and set LD emulations
correctly for `mips*-*-kfreebsd*-gnu' targets in comm-data.exp, removing
test suite failures:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/nocopyreloc common symbol override test
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
`mips*-*-kfreebsd*-gnu' targets.
During a -r (or --emit-relocs) link, if two sections had the same name but
different section types, gold would put relocations for both sections into
the same relocation section even though the data sections remained separate.
For .eh_frame sections, when one section is PROGBITS and another is
X86_64_UNWIND, we really should be using the UNWIND section type and
combining the sections anyway. For other sections, we should be
creating one relocation section for each output data section.
gold/
PR gold/23016
* incremental.cc (can_incremental_update): Check for unwind section
type.
* layout.h (Layout::layout): Add sh_type parameter.
* layout.cc (Layout::layout): Likewise.
(Layout::layout_reloc): Create new output reloc section if data
section does not already have one.
(Layout::layout_eh_frame): Check for unwind section type.
(Layout::make_eh_frame_section): Use unwind section type for .eh_frame
and .eh_frame_hdr.
* object.h (Sized_relobj_file::Shdr_write): New typedef.
(Sized_relobj_file::layout_section): Add sh_type parameter.
(Sized_relobj_file::Deferred_layout::Deferred_layout): Add sh_type
parameter.
* object.cc (Sized_relobj_file::check_eh_frame_flags): Check for
unwind section type.
(Sized_relobj_file::layout_section): Add sh_type parameter; pass it
to Layout::layout.
(Sized_relobj_file::do_layout): Make local copy of sh_type.
Force .eh_frame sections to unwind section type.
Pass sh_type to layout_section.
(Sized_relobj_file<size, big_endian>::do_layout_deferred_sections):
Pass sh_type to layout_section.
* output.cc (Output_section::Output_section): Initialize reloc_section_.
* output.h (Output_section::reloc_section): New method.
(Output_section::set_reloc_section): New method.
(Output_section::reloc_section_): New data member.
* target.h (Target::unwind_section_type): New method.
(Target::Target_info::unwind_section_type): New data member.
* aarch64.cc (aarch64_info): Add unwind_section_type.
* arm.cc (arm_info, arm_nacl_info): Likewise.
* i386.cc (i386_info, i386_nacl_info, iamcu_info): Likewise.
* mips.cc (mips_info, mips_nacl_info): Likewise.
* powerpc.cc (powerpc_info): Likewise.
* s390.cc (s390_info): Likewise.
* sparc.cc (sparc_info): Likewise.
* tilegx.cc (tilegx_info): Likewise.
* x86_64.cc (x86_64_info, x86_64_nacl_info): Likewise.
* testsuite/Makefile.am (pr23016_1, pr23016_2): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/testfile.cc: Add unwind_section_type.
* testsuite/pr23016_1.sh: New test script.
* testsuite/pr23016_1a.s: New source file.
* testsuite/pr23016_1b.s: New source file.
* testsuite/pr23016_2.sh: New test script.
* testsuite/pr23016_2a.s: New source file.
* testsuite/pr23016_2b.s: New source file.
