attribute in GLIBC 2.8.
* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
* inflow.c (check_syscall): New function.
(new_tty): Use check_syscall to check return values from open and dup.
* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
* main.c (captured_main): Call cwd after setting up gdb_stderr;
check for errors from getcwd.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
* ui-file.c (stdio_file_write): Ignore return value from fwrite.
(stdio_file_fputs): Same.
* utils.c (internal_vproblem): abort if last-ditch error message
write fails.
* linux-fork.h (linux_fork_detach): Declare.
* linux-nat.c (linux_child_follow_fork): When following the fork
child, add the child inferior before possibly detaching from the
parent. Don't reinstall ourselves.
(linux_nat_detach): Call linux_fork_detach if there are other
forks to debug.
* linux-thread-db.c (thread_db_detach): Don't call
target_mourn_inferior. Instead inline the necessary bits.
* inf-ptrace.c (inf_ptrace_detach): Don't unpush the target if
there are other inferiors to debug.
and not detaching the parent, also add the child fork to the fork
list.
* linux-fork.c (linux_fork_context): Remove dead error call.
Assert that the incoming newfp argument is not null. Do not add a
new fork for inferior_ptid. Assert that there is one already.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
(gnu_detach): Remove it.
* go32-nat.c (go32_create_inferior): Add process to gdb's inferior
table.
* inf-ptrace.c (inf_ptrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ptrace_attach): Add new process to inferior table.
(inf_ptrace_detach): Remove it.
* inf-ttrace.c (inf_ttrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ttrace_attach): Add process to inferior table.
(inf_ttrace_detach): Remove it.
* linux-fork.c (init_fork_list): Delete any left over inferior.
(linux_fork_mourn_inferior, detach_fork_command): Also delete
processes from inferior list.
* monitor.c (monitor_open): Add process to inferior list.
(monitor_close): Remove it.
* nto-procfs.c (procfs_attach): Add process to inferior list.
Find threads after pushing the target.
(procfs_detach): Remove process from inferior list.
(procfs_create_inferior): Add process to inferior list.
* procfs.c (procfs_detach): Remove process from inferior list.
(do_attach): Add process to inferior list.
* remote-sim.c (sim_create_inferior): Add process to inferior list.
(gdbsim_close): Remove it.
* target.c (generic_mourn_inferior): If inferior_ptid is not
null_ptid, remove the corresponding inferior from inferior list.
* win32-nat.c (do_initial_win32_stuff): Add process to inferior list.
(win32_detach): Remove it.
* linux-nat.c (linux_child_follow_fork): Delete and add inferiors
to inferior list accordingly.
* fork-child.c (fork_inferior): Add process to inferior list.
* corelow.c (CORELOW_PID): Define.
(core_close): Remove core from inferior list.
(core_open): Add it.
* linux-nat.c (linux_nat_wait): Only use set_ignore_sigint in
all-stop mode.
gdb/testsuite/
* lib/mi-support.exp (mi_expect_interrupt): New.
(mi_reverse_list, mi_check_thread_states): New, moved and renamed
from gdb.mi/mi-nonstop.exp.
* gdb.mi/mi-nsintrall.exp, gdb.mi/nsintrall.c: New.
* gdb.mi/mi-nonstop.exp (myreverse, check_thread_states): Moved to
lib/mi-support.exp.
Use mi_check_thread_states throughout. Avoid ".*" and do not
require an anchor after -exec-run.
(inf_ptrace_attach): Add the main thread here.
* linux-nat.c (linux_nat_attach): Don't add the main thread here.
Decorate the main thread id with the lwp id.
(linux_nat_has_pending_sigint): New function, based on
linux_nat_has_pending.
(set_ignore_sigint, maybe_clear_ignore_sigint): New functions.
(stop_wait_callback): Remove flush_mask handling. Honor
ignore_sigint. Call maybe_clear_ignore_sigint. Pass NULL
to recursive calls.
(linux_nat_has_pending, flush_callback): Remove.
(linux_nat_filter_event): Check for ignore_sigint.
(linux_nat_wait): Remove flush_mask support and call to
flush_callback. Use set_ignore_sigint and maybe_clear_ignore_sigint.
* linux-nat.h (struct lwp_info): Add ignore_sigint field.
* gdb.threads/manythreads.exp: Use remote_expect instead of after.
Add a test for duplicated SIGINTs.
report events from resumed threads.
* gdb.threads/schedlock.exp (get_args): Update to work for any
value of NUM.
(Top level): Report the number of threads that did not resume.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* linux-nat.c (linux_test_for_tracefork): Block events while we're
here.
(get_pending_status): Implement non-stop mode.
(linux_nat_detach): Stop threads before detaching.
(linux_nat_resume): In non-stop mode, always resume only a single
PTID.
(linux_handle_extended_wait): On a clone event, in non-stop mode,
add new lwp to GDB's thread table, and mark as running, executing
and stopped appropriately.
(linux_nat_filter_event): Don't assume there are other running
threads when a thread exits.
(linux_nat_wait): Mark the main thread as running and executing.
In non-stop mode, don't stop all lwps.
(linux_nat_kill): Stop lwps before killing them.
(linux_nat_thread_alive): Use signal 0 to detect if a thread is
alive.
(send_sigint_callback): New.
(linux_nat_stop): New.
(linux_nat_add_target): Set to_stop to linux_nat_stop.
* linux-nat.h (thread_db_attach_lwp): Declare.
* linux-thread-db.c (thread_get_info_callback): Check for new
threads if we have none.
(thread_from_lwp, enable_thread_event): Set proc_handle.pid to the
stopped lwp. Check for new threads if we have none.
(thread_db_attach_lwp): New.
(thread_db_init): Set proc_handle.pid to inferior_ptid.
(check_event): Set proc_handle.pid to the stopped lwp.
(thread_db_find_new_threads): Set proc_handle.pid to any stopped
lwp available, bail out if there is none.
* linux-fork.c (linux_fork_killall): Use SIGKILL instead of
PTRACE_KILL.
* target.h (struct target_waitstatus): Store related_pid as a ptid.
(inferior_has_forked, inferior_has_vforked, inferior_has_execd):
Take a ptid_t.
* breakpoint.h (struct breakpoint): Change forked_inferior_pid
type to ptid.
* breakpoint.c (print_it_typical, bpstat_check_location)
(print_one_breakpoint_location, set_raw_breakpoint_without_location)
(create_fork_vfork_event_catchpoint): Adjust.
* infrun.c (fork_event): Change parent_pid and child_pid types to
ptid.
(follow_exec, inferior_has_forked, inferior_has_vforked)
(inferior_has_execd): Take a ptid_t and don't trim it.
* linux-thread-db.c (thread_db_wait): Don't trim the returned ptid.
* linux-nat.c (linux_child_follow_fork): Adjust.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait): Adjust.
* win32-nat.c (get_win32_debug_event): Don't set related_pid.
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
core_regset_sections.
* gdbarch.c: Refreshed.
* gdbarch.h: Refreshed.
* regset.h (core_regset_section): Declared.
* linux-nat.c (linux_nat_do_thread_registers): Added
support for the new gdbarch struct core_regset_sections.
* utils.c (host_address_to_string): New function.
* defs.h (host_address_to_string): New prototype.
* i386-linux-tdep.c (i386_regset_rections): New register
sections list for i386.
(i386_linux_init_abi): Initialized new gdbarch struct
core_regset_sections.
* Makefile.in: Updated to reflect dependency changes.
* ppc-linux-tdep.c (ppc_regset_sections): Register
sections list for ppc.
(ppc_linux_init_abi): Initialized new gdbarch struct
core_regset_sections
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
gdb's thread list.
(linux_nat_wait): Add main lwp to gdb's thread list.
* linux-thread-db.c (find_new_threads_callback): Also attach to
already listed threads which thread_db didn't know about yet.
* linux-nat.c (drain_queued_events): Fix comment typo.
(linux_nat_attach): In async mode, don't rely on storing a pending
status. Instead place the wait status on the pipe.
(linux_nat_resume): Remove unreacheable shortcut code in async
mode.
(stop_wait_callback): In async mode, don't store pending status.
Instead, cancel breakpoints or resend the signal appropriatelly.
(cancel_breakpoint): New, refactored from
cancel_breakpoints_callback.
(cancel_breakpoints_callback): Call cancel_breakpoint.
(pipe_to_local_event_queue): Remove special token processing.
(linux_nat_wait): Issue an internal error if a pending status is
found in async mode.
* target.h (struct target_ops): Delete to_async_mask_value and add
to_async_mask.
(target_is_async_p, target_async): Formatting.
(target_async_mask_value): Delete.
(target_async_mask): Delete function declaration, and add new
target macro with the same name.
* target.c (update_current_target): Replace to_async_mask_value by
to_async_mask. Default to_async_mask to return_one.
(target_async_mask): Delete.
(find_default_can_async_p, find_default_is_async_p): New.
(init_dummy_target): register find_default_can_async_p and
find_default_is_async_p on the dummy target.
* linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h.
(debug_linux_nat_async): New global.
(show_debug_linux_nat_async): New function.
(linux_nat_async_enabled, linux_nat_async_mask_value)
(linux_nat_event_pipe, linux_nat_num_queued_events)
(linux_nat_async_events_enabled): New globals.
(struct waitpid_result): New struct.
(waitpid_queue): New global.
(queued_waitpid, push_waitpid, drain_queued_events): New.
(my_waitpid): Call queued_waitpid.
(linux_child_follow_fork): Disable async events during the call.
(blocked_mask): Delete.
(sync_sigchld_action, async_sigchld_action): New globals.
(lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD. In
async mode, block events during the call.
(linux_nat_create_inferior): New.
(linux_nat_attach): In sync mode, restore the mask states. In
async mode, wake the event loop immediatelly.
(detach_callback): Drain all queued events of the lwp we're
detaching from.
(linux_nat_detach): Block async mode, and drain events of the main
process.
(linux_nat_resume): If in async mode, mask async events during the
call. If short circuiting, force event loop to wake up. If
resuming, set target_executing, and register target events in the
event loop.
(pipe_to_local_event_queue, local_event_queue_to_pipe): New.
(linux_nat_wait): In async mode, block events during the call.
Only enable/disable passing SIGINT to the inferior in sync mode.
Get events from local waitpid queue. If no interesting events was
found, return to events loop. Reregister target events in the
event loop on exit. In sync mode, no need to reblock SIGCHLD.
(linux_nat_kill): Disable events on entry.
(linux_nat_mourn_inferior): In sync mode, don't restore the masks
here. Detach async mode from the event loop if there are no more
forks available, otherwise leave it on.
(sigchld_handler): Assure this is called only in sync mode.
(linux_async_permitted, linux_async_permitted_1): New globals.
(set_maintenance_linux_async_permitted)
(show_maintenance_linux_async_permitted): New functions.
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_async_mask): New.
(linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New.
(get_pending_events, async_sigchld_handler): New.
(linux_nat_async_events): New.
(async_terminal_is_ours): New global.
(linux_nat_terminal_inferior, linux_nat_terminal_ours): New.
(async_client_callback, async_client_context): New.
(linux_nat_async_file_handler, linux_nat_async)
(linux_nat_disable_async, linux_nat_enable_async): New.
(linux_nat_add_target): Register linux_nat_create_inferior,
linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async,
linux_nat_async_mask, linux_nat_terminal_inferior and
linux_nat_terminal_ours.
(_initialize_linux_nat): Remove local action variable, and update
code that used it to use sync_sigchld_action. Add new
"lin-lwp-async" debug set/show command. Put the "lin-lwp" debug
set/show command in the maintenance class. Add new "linux-async"
maintenance set/show command. Block SIGCHLD by default. Setup
async_sichld_action, and sync_sigchld_action. Install the default
async mode.
(lin_thread_get_thread_signals): Use a local sigset_t for blocking
the cancel signals.
* linux-thread-db.c (re_check_for_thread_db): New.
(clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): New.
(init_thread_db_ops): Register thread_db_can_async_p,
thread_db_is_async_p, thread_db_async and thread_db_async_mask.
* remote.c (remote_async_mask_value): New.
(remote_return_zero): New.
(init_remote_ops): Register remote_return_zero as callbacks of
to_can_async_p and to_is_async_p.
(remote_can_async_p, remote_is_async_p, remote_async): Update to
use remote_async_mask_value.
(remote_async_mask): New.
(init_remote_async_ops): Remove to_async_mask_value setting and
register remote_async_mask as to_async_mask callback in
remote_async_ops.
* Makefile.in (linux-nat.o): Update.
gdb/doc/
* gdb.texinfo (Debugging Output): Document
"set/show debug lin-lwp-async".
(Maintenance Commands): Document "maint set/show linux-async".
* gdbthread.h (add_thread_with_info): New.
* linux-thread-db.c: Add some documentation.
(GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
(struct private_thread_info): Remove th_valid and ti_valid.
Replace ti with tid.
(thread_get_info_callback): Do not add TID to the new ptid. Do
not cache th or ti.
(thread_db_map_id2thr, lwp_from_thread): Delete functions.
(thread_from_lwp): Assert that the LWP is set. Do not add TID to the
new PTID.
(attach_thread): Handle an already-existing thread. Use
add_thread_with_info. Cache the th and tid.
(detach_thread): Verify that private was set. Remove verbose
argument and printing. Update caller.
(thread_db_detach): Do not adjust inferior_ptid.
(clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
(check_event, find_new_threads_callback): Do not add TID to the new PTID.
(thread_db_wait): Do not use lwp_from_thread.
(thread_db_pid_to_str): Use the cached TID.
(thread_db_extra_thread_info): Check that private is set.
(same_ptid_callback): Delete.
(thread_db_get_thread_local_address): Do not use it or check
is_thread. Check that private is set. Assume that the thread
handle is already cached.
(init_thread_db_ops): Remove to_resume and to_kill.
* thread.c (add_thread_with_info): New.
(add_thread): Use it.
* linux-nat.c (find_thread_from_lwp): Delete.
(exit_lwp): Do not use it. Check print_thread_events. Print before
deleting the thread.
(GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
* linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
* inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
printf_unfiltered for thread exits.
* procfs.c (procfs_wait): Likewise.
2008-03-21 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/fork-child-threads.exp: Test next over fork.
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
instead of "Linux 2.6.19" in comment.
(linux_xfer_partial): Use "GNU/Linux target" instead of
"Linux target" in comment.
* m68klinux-tdep.c (m68k_linux_inferior_created): Likewise.
(m68k_linux_get_sigtramp_info): Likewise.