[ Migrating this from Gerrit: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/321 ]
I noticed that some functions in infcmd and infrun call each other and
all call inferior_thread, while they could just get the thread_info
pointer from their caller. That means less calls to inferior_thread, so
less reliance on global state, since inferior_thread reads
inferior_ptid.
The paths I am unsure about are:
- fetch_inferior_event calls...
- step_command_fsm::should_stop calls...
- prepare_one_step
and
- process_event_stop_test calls...
- set_step_info
Before this patch, prepare_one_step gets the thread pointer using
inferior_thread. After this patch, it gets it from the
execution_control_state structure in fetch_inferior_event. Are we sure
that the thread from the execution_control_state structure is the same
as the one inferior_thread would return? This code path is used when a
thread completes a step, but the user had specified a step count (e.g.
"step 5") so we decide to do one more step. It would be strange (and
even a bug I suppose) if the thread in the ecs structure in
fetch_inferior_event was not the same thread that is prepared to stepped
by prepare_one_step. So I believe passing the ecs thread is fine.
The same logic applies to process_event_stop_test calling
set_step_info.
gdb/ChangeLog:
* infrun.h: Forward-declare thread_info.
(set_step_info): Add thread_info parameter, add doc.
* infrun.c (set_step_info): Add thread_info parameter, move doc
to header.
* infrun.c (process_event_stop_test): Pass thread to
set_step_info call.
* infcmd.c (set_step_frame): Add thread_info pointer, pass it to
set_step_info.
(prepare_one_step): Add thread_info parameter, pass it to
set_step_frame and prepare_one_step (recursive) call.
(step_1): Pass thread to prepare_one_step call.
(step_command_fsm::should_stop): Pass thread to
prepare_one_step.
(until_next_fsm): Pass thread to set_step_frame call.
(finish_command): Pass thread to set_step_info call.
To help with readability, add the type displaced_step_closure_up, an
alias for std::unique_ptr<displaced_step_closure>, and use it throughout
the code base.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Use
displaced_step_closure_up.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
(struct displaced_step_closure_up):
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn):
Likewise.
* gdbarch.sh (displaced_step_copy_insn): Likewise.
* gdbarch.c, gdbarch.h: Re-generate.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Use
displaced_step_closure_up.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* infrun.h (displaced_step_closure_up): New type alias.
(struct displaced_step_inferior_state) <step_closure>: Change
type to displaced_step_closure_up.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Use
displaced_step_closure_up.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
displaced_step_inferior_state::reset and displaced_step_clear appear to
have the same goal, but they don't do the same thing.
displaced_step_inferior_state::reset clears more things than
displaced_step_clear, but it misses free'ing the closure, which
displaced_step_clear does.
This patch replaces displaced_step_clear's implementation with just a call to
displaced_step_inferior_state::reset. It then changes
displaced_step_inferior_state::step_closure to be a unique_ptr, to indicate the
fact that displaced_step_inferior_state owns the closure (and so that it is
automatically freed when the field is reset).
The test gdb.base/step-over-syscall.exp caught a problem when doing this, which
I consider to be a latent bug which my cleanup exposes. In
handle_inferior_event, in the TARGET_WAITKIND_FORKED case, if we displaced-step
over a fork syscall, we make sure to restore the memory that we used as a
displaced-stepping buffer in the child. We do so using the
displaced_step_inferior_state of the parent. However, we do it after calling
displaced_step_fixup for the parent, which clears the information in the
parent's displaced_step_inferior_state. It worked fine before, because
displaced_step_clear didn't completely clear the displaced_step_inferior_state
structure, so the required information (in this case the gdbarch) was
still available after clearing.
I fixed it by making GDB restore the child's memory before calling the
displaced_step_fixup on the parent. This way, the data in the
displaced_step_inferior_state structure is still valid when we use it for the
child. This is the error you would get in
gdb.base/step-over-syscall.exp without this fix:
/home/smarchi/src/binutils-gdb/gdb/gdbarch.c:3911: internal-error: ULONGEST gdbarch_max_insn_length(gdbarch*): Assertion `gdbarch != NULL' failed.
gdb/ChangeLog:
* infrun.c (get_displaced_step_closure_by_addr): Adjust to
std::unique_ptr.
(displaced_step_clear): Rename to...
(displaced_step_reset): ... this. Just call displaced->reset ().
(displaced_step_clear_cleanup): Rename to...
(displaced_step_reset_cleanup): ... this.
(displaced_step_prepare_throw): Adjust to std::unique_ptr.
(displaced_step_fixup): Likewise.
(resume_1): Likewise.
(handle_inferior_event): Restore child's memory before calling
displaced_step_fixup on the parent.
* infrun.h (displaced_step_inferior_state) <reset>: Adjust
to std::unique_ptr.
<step_closure>: Change type to std::unique_ptr.
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
- Make get_last_target_status arguments optional. A following patch
will add another argument to get_last_target_status (the event's
target), and passing nullptr when we don't care for some piece of
info is handier than creating dummy local variables.
- Declare nullify_last_target_wait_ptid in a header, and remove the
local extern declaration from linux-fork.c.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_print_it): Don't pass a
ptid to get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Don't pass a
ptid to get_last_target_status.
* infcmd.c (continue_command): Don't pass a target_waitstatus to
get_last_target_status.
(info_program_command): Don't pass a target_waitstatus to
get_last_target_status.
* infrun.c (init_wait_for_inferior): Use
nullify_last_target_wait_ptid.
(get_last_target_status): Handle nullptr arguments.
(nullify_last_target_wait_ptid): Clear target_last_waitstatus.
(print_stop_event): Don't pass a ptid to get_last_target_status.
(normal_stop): Don't pass a ptid to get_last_target_status.
* infrun.h (get_last_target_status, set_last_target_status): Move
comments here and update.
(nullify_last_target_wait_ptid): Declare.
* linux-fork.c (fork_load_infrun_state): Remove local extern
declaration of nullify_last_target_wait_ptid.
* linux-nat.c (get_detach_signal): Don't pass a target_waitstatus
to get_last_target_status.
If you run "gdb -i=mi2" and set a "display", then when "next"ing the
displays will be shown twice:
~"1: x = 23\n"
~"7\t printf(\"%d\\n\", x);\n"
~"1: x = 23\n"
*stopped,reason="end-stepping-range",frame={addr="0x0000000000400565",func="main",args=[],file="q.c",fullname="/tmp/q.c",line="7"},thread-id="1",stopped-threads="all",core="1"
The immediate cause of this is this code in mi_on_normal_stop_1:
print_stop_event (mi_uiout);
console_interp = interp_lookup (current_ui, INTERP_CONSOLE);
if (should_print_stop_to_console (console_interp, tp))
print_stop_event (mi->cli_uiout);
... which obviously prints the stop twice.
However, I think the first call to print_stop_event is intended just
to emit the MI *stopped notification, which explains why the source
line does not show up two times.
This patch fixes the bug by changing print_stop_event to only call
do_displays for non-MI-like ui-outs.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-19 Tom Tromey <tromey@adacore.com>
* mi/mi-interp.c (mi_on_normal_stop_1): Only show displays once.
* infrun.h (print_stop_event): Add "displays" parameter.
* infrun.c (print_stop_event): Add "displays" parameter.
gdb/testsuite/ChangeLog
2019-03-19 Tom Tromey <tromey@adacore.com>
* gdb.mi/mi2-cli-display.c: New file.
* gdb.mi/mi2-cli-display.exp: New file.
This patch moves the per-inferior data related to displaced stepping to
be directly in the inferior structure, rather than in a container on the
side.
On notable difference is that previously, we deleted the state on
inferior exit, which guaranteed a clean state if re-using the inferior
for a new run or attach. We now need to reset the state manually.
At the same time, I changed step_saved_copy to be a gdb::byte_vector, so
it is automatically freed on destruction (which should plug the leak
reported here [1]).
[1] https://sourceware.org/ml/gdb-patches/2018-11/msg00202.html
gdb/ChangeLog:
* inferior.h (class inferior) <displaced_step_state>: New field.
* infrun.h (struct displaced_step_state): Move here from
infrun.c. Initialize fields, add constructor.
<inf>: Remove field.
<reset>: New method.
* infrun.c (struct displaced_step_inferior_state): Move to
infrun.h.
(displaced_step_inferior_states): Remove.
(get_displaced_stepping_state): Adust.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Adjust.
(displaced_step_in_progress): Adjust.
(add_displaced_stepping_state): Remove.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Remove.
(infrun_inferior_exit): Call displaced_step_state.reset.
(use_displaced_stepping): Don't check for NULL.
(displaced_step_prepare_throw): Call
get_displaced_stepping_state.
(displaced_step_fixup): Don't check for NULL.
(prepare_for_detach): Don't check for NULL.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Make the infrun.c:resume function static, and update the header
comment on the infrun.c:proceed function. There should be no user
visible change after this commit.
gdb/ChangeLog:
* infrun.c (resume): Make static, add forward declaration.
(proceed): Update header comment.
* infrun.h (resume): Delete declaration.
displaced_step_closure is a type defined in multiple -tdep.c files.
Trying to xfree it from the common code (infrun.c) is a problem when we
try to poison xfree for non-POD types. Because there can be multiple of
these types in the same build, this patch makes a hierarchy of classes
with a virtual destructor. When the common code deletes the object
through a displaced_step_closure pointer, it will invoke the right
destructor.
The amd64 used a last-member array with a variable size. That doesn't
work with new, so I changed it for an std::vector. Other architectures
which used a simple byte buffer as a closure now use a shared
buf_displaced_step_closure, a closure type that only contains a
gdb::byte_vector.
Reg-tested on the buildbot.
gdb/ChangeLog:
* infrun.h: Include common/byte-vector.h.
(struct displaced_step_closure): New struct.
(struct buf_displaced_step_closure): New struct.
* infrun.c (displaced_step_closure::~displaced_step_closure):
Provide default implementation.
(displaced_step_clear): Deallocate step closure with delete.
* aarch64-tdep.c (displaced_step_closure): Rename to ...
(aarch64_displaced_step_closure): ... this, extend
displaced_step_closure.
(aarch64_displaced_step_data) <dsc>: Change type to
aarch64_displaced_step_closure.
(aarch64_displaced_step_copy_insn): Adjust to type change, use
unique_ptr.
(aarch64_displaced_step_fixup): Add cast for displaced step
closure.
* amd64-tdep.c (displaced_step_closure): Rename to ...
(amd64_displaced_step_closure): ... this, extend
displaced_step_closure.
<insn_buf>: Change type to std::vector<gdb_byte>.
<max_len>: Remove.
(fixup_riprel): Change type of DSC parameter, adjust to type
change of insn_buf.
(fixup_displaced_copy): Change type of DSC parameter.
(amd64_displaced_step_copy_insn): Instantiate
amd64_displaced_step_closure.
(amd64_displaced_step_fixup): Add cast for closure type, adjust
to type change of insn_buf.
* arm-linux-tdep.c (arm_linux_cleanup_svc): Change type of
parameter DSC.
(arm_linux_copy_svc): Likewise.
(cleanup_kernel_helper_return): Likewise.
(arm_catch_kernel_helper_return): Likewise.
(arm_linux_displaced_step_copy_insn): Instantiate
arm_displaced_step_closure.
* arm-tdep.c (arm_pc_is_thumb): Add cast for closure.
(displaced_read_reg): Change type of parameter DSC.
(branch_write_pc): Likewise.
(load_write_pc): Likewise.
(alu_write_pc): Likewise.
(displaced_write_reg): Likewise.
(arm_copy_unmodified): Likewise.
(thumb_copy_unmodified_32bit): Likewise.
(thumb_copy_unmodified_16bit): Likewise.
(cleanup_preload): Likewise.
(install_preload): Likewise.
(arm_copy_preload): Likewise.
(thumb2_copy_preload): Likewise.
(install_preload_reg): Likewise.
(arm_copy_preload_reg): Likewise.
(cleanup_copro_load_store): Likewise.
(install_copro_load_store): Likewise.
(arm_copy_copro_load_store) Likewise.
(thumb2_copy_copro_load_store): Likewise.
(cleanup_branch): Likewise.
(install_b_bl_blx): Likewise.
(arm_copy_b_bl_blx): Likewise.
(thumb2_copy_b_bl_blx): Likewise.
(thumb_copy_b): Likewise.
(install_bx_blx_reg): Likewise.
(arm_copy_bx_blx_reg): Likewise.
(thumb_copy_bx_blx_reg): Likewise.
(cleanup_alu_imm): Likewise.
(arm_copy_alu_imm): Likewise.
(thumb2_copy_alu_imm): Likewise.
(cleanup_alu_reg): Likewise.
(install_alu_reg): Likewise.
(arm_copy_alu_reg): Likewise.
(thumb_copy_alu_reg): Likewise.
(cleanup_alu_shifted_reg): Likewise.
(install_alu_shifted_reg): Likewise.
(arm_copy_alu_shifted_reg): Likewise.
(cleanup_load): Likewise.
(cleanup_store): Likewise.
(arm_copy_extra_ld_st): Likewise.
(install_load_store): Likewise.
(thumb2_copy_load_literal): Likewise.
(thumb2_copy_load_reg_imm): Likewise.
(arm_copy_ldr_str_ldrb_strb): Likewise.
(cleanup_block_load_all): Likewise.
(cleanup_block_store_pc): Likewise.
(cleanup_block_load_pc): Likewise.
(arm_copy_block_xfer): Likewise.
(thumb2_copy_block_xfer): Likewise.
(cleanup_svc): Likewise.
(install_svc): Likewise.
(arm_copy_svc): Likewise.
(thumb_copy_svc): Likewise.
(arm_copy_undef): Likewise.
(thumb_32bit_copy_undef): Likewise.
(arm_copy_unpred): Likewise.
(arm_decode_misc_memhint_neon): Likewise.
(arm_decode_unconditional): Likewise.
(arm_decode_miscellaneous): Likewise.
(arm_decode_dp_misc): Likewise.
(arm_decode_ld_st_word_ubyte): Likewise.
(arm_decode_media): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(arm_decode_ext_reg_ld_st): Likewise.
(thumb2_decode_dp_shift_reg): Likewise.
(thumb2_decode_ext_reg_ld_st): Likewise.
(arm_decode_svc_copro): Likewise.
(thumb2_decode_svc_copro): Likewise.
(install_pc_relative): Likewise.
(thumb_copy_pc_relative_16bit): Likewise.
(thumb_decode_pc_relative_16bit): Likewise.
(thumb_copy_pc_relative_32bit): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_cbnz_cbz): Likewise.
(thumb2_copy_table_branch): Likewise.
(cleanup_pop_pc_16bit_all): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
(thumb_process_displaced_16bit_insn): Likewise.
(decode_thumb_32bit_ld_mem_hints): Likewise.
(thumb_process_displaced_32bit_insn): Likewise.
(thumb_process_displaced_insn): Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(arm_displaced_step_fixup): Add cast for closure.
* arm-tdep.h: Include infrun.h.
(displaced_step_closure): Rename to ...
(arm_displaced_step_closure): ... this, extend
displaced_step_closure.
<u::svc::copy_svc_os>: Change type of parameter DSC.
<cleanup>: Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(displaced_read_reg): Likewise.
(displaced_write_reg): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn):
Adjust.
* i386-tdep.h: Include infrun.h.
(i386_displaced_step_closure): New typedef.
* i386-tdep.c (i386_displaced_step_copy_insn): Use
i386_displaced_step_closure.
(i386_displaced_step_fixup): Adjust.
* rs6000-tdep.c (ppc_displaced_step_closure): New typedef.
(ppc_displaced_step_copy_insn): Use ppc_displaced_step_closure
and unique_ptr.
(ppc_displaced_step_fixup): Adjust.
* s390-linux-tdep.c (s390_displaced_step_closure): New typedef.
(s390_displaced_step_copy_insn): Use s390_displaced_step_closure
and unique_ptr.
(s390_displaced_step_fixup): Adjust.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Running mi-break.exp with MI on a secondary UI reveals that MI emits
spurious prompts compared MI running as primary UI:
-exec-continue
^running
*running,thread-id="all"
(gdb)
=breakpoint-modified,bkpt={number="9",type="breakpoint",disp="keep",enabled="y",func="callee2",line="39",script={"set $i=0","while $i<10","print $i","set $i=$i+1","end","continue"}}
~"\n"
~"Breakpoint 9, callee2 (intarg=2, strarg=0x400730 \"A string argument.\") at ...src/gdb/testsuite/gdb.mi/basics.c:39\n"
~"39\t callee3 (strarg);\n"
*stopped,reason="breakpoint-hit",disp="keep",bkptno="9",frame={addr="0x00000000004005dd",func="callee2",...
*running,thread-id="all"
>> (gdb)
=breakpoint-modified,bkpt={number="9",...
~"\n"
~"Breakpoint 9, callee2 (intarg=2, strarg=0x400730 \"A string argument.\") at ...src/gdb/testsuite/gdb.mi/basics.c:39\n"
~"39\t callee3 (strarg);\n"
*stopped,reason="breakpoint-hit",disp="keep",bkptno="9",...
*running,thread-id="all"
~"[Inferior 1 (process 12639) exited normally]\n"
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
*stopped,reason="exited-normally"
FAIL: gdb.mi/mi-break.exp: intermediate stop and continue
FAIL: gdb.mi/mi-break.exp: test hitting breakpoint with commands (timeout)
Note the line marked >> above.
The test sets a breakpoint that runs "continue", a foreground command.
When we get to run the "continue", we've already emitted the *stopped
event on the MI UI, and set its prompt state to PROMPT_NEEDED (this is
done from within normal_stop). Since inferior events are always
handled with the main UI as current UI, breakpoint commands always run
with the main UI as current UI too. This means that the "continue"
ends up always disabling the prompt on the main UI, instead of the UI
that had just been done with synchronous execution.
I think we'll want to extend this with a concept of "set of
threads/inferiors a UI/interpreter is blocked waiting on", but I'm
leaving that for a separate series.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* infcmd.c (prepare_execution_command): Use
all_uis_on_sync_execution_starting.
* infrun.c (all_uis_on_sync_execution_starting): New function.
* infrun.h (all_uis_on_sync_execution_starting): Declare.
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.
With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target. IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.
Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:
/* If the inferior was in sync execution mode, and now isn't,
restore the prompt (a synchronous execution command has finished,
and we're ready for input). */
if (current_ui->async && was_sync && !sync_execution)
observer_notify_sync_execution_done ();
We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.
This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:
enum prompt_state
{
/* The command line is blocked simulating synchronous execution.
This is used to implement the foreground execution commands
('run', 'continue', etc.). We won't display the prompt and
accept further commands until the execution is actually over. */
PROMPT_BLOCKED,
/* The command finished; display the prompt before returning back to
the top level. */
PROMPT_NEEDED,
/* We've displayed the prompt already, ready for input. */
PROMPTED,
;
I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* annotate.c: Include top.h.
(async_background_execution_p): Delete.
(print_value_flags): Check the UI's prompt state rather then
async_background_execution_p.
* event-loop.c (start_event_loop): Set the prompt state to
PROMPT_NEEDED.
* event-top.c (display_gdb_prompt, async_enable_stdin)
(async_disable_stdin): Check the current UI's prompt state instead
of the sync_execution global.
(command_line_handler): Set the prompt state to PROMPT_NEEDED
before running a command, and display the prompt if still needed
afterwards.
* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
(new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
(call_thread_fsm_should_stop): Set the prompt state to
PROMPT_NEEDED.
(run_inferior_call): Adjust to temporarily set the prompt state to
PROMPT_BLOCKED instead of using the sync_execution global.
(call_function_by_hand_dummy): Pass the current UI to
new_call_thread_fsm.
* infcmd.c: Include top.h.
(continue_1): Check the current UI's prompt state instead of the
sync_execution global.
(continue_command): Validate global execution state before calling
prepare_execution_command.
(step_1): Call all_uis_check_sync_execution_done.
(attach_post_wait): Don't call async_enable_stdin here. Remove
reference to sync_execution.
* infrun.c (sync_execution): Delete global.
(follow_fork_inferior)
(reinstall_readline_callback_handler_cleanup): Check the current
UI's prompt state instead of the sync_execution global.
(check_curr_ui_sync_execution_done)
(all_uis_check_sync_execution_done): New functions.
(fetch_inferior_event): Call all_uis_check_sync_execution_done
instead of trying to determine whether the global sync execution
changed.
(handle_no_resumed): Check the prompt state of all UIs.
(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
UIs. Emit the "Switching to" notification to all UIs. Enable
stdin in all UIs.
* infrun.h (sync_execution): Delete.
(all_uis_check_sync_execution_done): Declare.
* main.c (captured_command_loop): Don't call
interp_pre_command_loop if the prompt is blocked.
(catch_command_errors, catch_command_errors_const): Adjust.
(captured_main): Set the initial prompt state to PROMPT_NEEDED.
* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
PROMPTED.
(mi_interpreter_resume): Don't clear sync_execution. Remove hack
comment.
(mi_execute_command_input_handler): Set the prompt state to
PROMPT_NEEDED before executing the command, and only display the
prompt if the prompt state is PROMPT_NEEDED afterwards.
(mi_on_resume_1): Adjust to check the prompt state.
* target.c (target_terminal_inferior): Adjust to check the prompt
state.
* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
(execute_command): Check the current UI's prompt state instead of
sync_execution.
* top.h (enum prompt_state): New.
(struct ui) <prompt_state>: New field.
(ALL_UIS): New macro.
GDB doesn't insert software single step breakpoint if the instruction
branches to itself, so that the program can't stop after command "si".
(gdb) b 32
Breakpoint 2 at 0x8680: file git/gdb/testsuite/gdb.base/branch-to-self.c, line 32.
(gdb) c
Continuing.
Breakpoint 2, main () at gdb/git/gdb/testsuite/gdb.base/branch-to-self.c:32
32 asm (".Lhere: " BRANCH_INSN " .Lhere"); /* loop-line */
(gdb) si
infrun: clear_proceed_status_thread (Thread 3991.3991)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 3991.3991] for step-over
infrun: skipping breakpoint: stepping past insn at: 0x8680
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending packet: $Z0,8678,4#f3...Packet received: OK
infrun: skipping breakpoint: stepping past insn at: 0x8680
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending packet: $Z0,b6fe86c8,4#82...Packet received: OK
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=1, current thread [Thread 3991.3991] at 0x868
breakpoint.c:should_be_inserted thinks the breakpoint shouldn't be
inserted, which is wrong. This patch restrict the condition that
only skip the non-single-step breakpoints if they are inserted at
the place we are stepping over, however we don't want to skip
single-step breakpoint if its thread is the thread we are stepping
over, so in this patch, I add a thread num in 'struct step_over_info'
to record the thread we're stepping over.
gdb:
2016-04-25 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (should_be_inserted): Return 0 if the location's
owner is not single step breakpoint or single step breakpoint's
thread isn't the thread which is stepping past a breakpoint.
* gdbarch.sh (software_single_step): Update comments.
* gdbarch.h: Regenerated.
* infrun.c (struct step_over_info) <thread>: New field.
(set_step_over_info): New argument 'thread'. Callers updated.
(clear_step_over_info): Set field thread to -1.
(thread_is_stepping_over_breakpoint): New function.
* infrun.h (thread_is_stepping_over_breakpoint): Declaration.
This is the first pass at implementing support for all-stop mode
running against the remote target using the non-stop variant of the
protocol.
The trickiest part here is the initial connection setup/synching. We
need to fetch all inferiors' target descriptions etc. before stopping
threads, because stop_all_threads needs to read the threads' registers
(to record each thread's stop_pc). But OTOH, the initial inferior
setup (target_post_attach, post_create_inferior, etc.), only works
correctly if the inferior is stopped... So I've split that initial
setup part from attach_command_post_wait to a separate function, and
added a "still needs setup" flag to the inferior structure. This is
similar to gdbserver/linux-low.c's handling of discovering the
process's target description). Then if on connection all threads of
the remote inferior are running, when we go about stopping them, as
soon as they stop we call setup_inferior, from within
stop_all_threads.
Also, in all-stop, we need to process all the initial stop replies to
learn about all the pending signal the threads may already be stopped
for, and pick the one to report as current. This is exposed by
gdb.threads/reconnect-signal.exp.
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (switch_to_thread_no_regs): Declare.
* infcmd.c (setup_inferior): New function, factored out from ...
(attach_command_post_wait): ... this. Rename to ...
(attach_post_wait): ... this. Replace parameter async_exec with
attach_post_wait_mode parameter. Adjust.
(enum attach_post_wait_mode): New enum.
(struct attach_command_continuation_args): Replace 'async_exec'
field with 'mode' field.
(attach_command_continuation): Adjust.
(attach_command): Add comment. Mark the inferior as needing
setup. Adjust to use enum attach_post_wait_mode.
(notice_new_inferior): Use switch_to_thread_no_regs. Adjust to
use enum attach_post_wait_mode.
* inferior.h (setup_inferior): Declare.
(struct inferior) <needs_setup>: New field.
* infrun.c (set_last_target_status): Make extern.
(stop_all_threads): Make extern. Setup inferior, if necessary.
* infrun.h (set_last_target_status, stop_all_threads): Declare.
* remote-notif.c (remote_async_get_pending_events_handler)
(handle_notification): Replace non_stop checks with
target_is_non_stop_p() checks.
* remote.c (remote_notice_new_inferior): Remove non_stop check.
(remote_update_thread_list): Replace non_stop check with
target_is_non_stop_p() check.
(print_one_stopped_thread): New function.
(process_initial_stop_replies): New 'from_tty' parameter.
"Notice" all new live inferiors after storing initial stops as
pending status in each corresponding thread. If all-stop, stop
all threads, try picking a signalled thread as current, and print
the status of that one thread. Record the last target status.
(remote_start_remote): Replace non_stop checks with
target_is_non_stop_p() checks. Don't query for the remote current
thread of use qOffsets here. Pass from_tty to
process_initial_stop_replies.
(extended_remote_attach): Replace non_stop checks with
target_is_non_stop_p() checks.
(extended_remote_post_attach): Send qOffsets here.
(remote_vcont_resume, remote_resume, remote_stop)
(remote_interrupt, remote_parse_stop_reply, remote_wait): Replace
non_stop checks with target_is_non_stop_p() checks.
(remote_async): If target is non-stop, mark/clear the pending
events token.
* thread.c (switch_to_thread_no_regs): New function.
This fixes a few build errors like these in C++ mode:
src/gdb/reverse.c: In function ‘void exec_reverse_once(char*, char*, int)’:
src/gdb/reverse.c:49:34: error: invalid conversion from ‘int’ to ‘exec_direction_kind’ [-fpermissive]
enum exec_direction_kind dir = execution_direction;
^
make: *** [reverse.o] Error 1
gdb/ChangeLog:
2015-10-13 Pedro Alves <palves@redhat.com>
* infrun.c (restore_execution_direction): New function.
(fetch_inferior_event): Use it instead of
make_cleanup_restore_integer.
(execution_direction): Change type to enum
exec_direction_kind.
* infrun.h (execution_direction): Likewise.
This patch, relative to a tree with
https://sourceware.org/ml/gdb-patches/2015-08/msg00295.html, fixes
issues/crashes that trigger if something unexpected happens during a
hook-stop.
E.g., if the inferior disappears while running the hook-stop, we hit
failed assertions:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>kill
>end
(gdb) si
Kill the program being debugged? (y or n) [answered Y; input not from terminal]
/home/pedro/gdb/mygit/build/../src/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
I noticed that if a hook-stop issues a synchronous execution command,
we print the same stop event twice:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>si
>end
(gdb) si
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< once
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< twice
(gdb)
In MI:
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
(gdb)
The fix has GDB stop processing the event if the context changed. I
don't expect people to be doing crazy things from the hook-stop.
E.g., it gives me headaches to try to come up a proper behavior for
handling a thread change from a hook-stop... (E.g., imagine the
hook-stop does thread N; step, with scheduler-locing on). I think the
most important bit here is preventing crashes.
The patch adds a new hook-stop.exp test that covers the above and also
merges in the old hook-stop-continue.exp and hook-stop-frame.exp into
the same framework.
gdb/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* infrun.c (current_stop_id): New global.
(get_stop_id, new_stop_id): New functions.
(fetch_inferior_event): Handle normal_stop proceeding the target.
(struct stop_context): New.
(save_stop_context, release_stop_context_cleanup)
(stop_context_changed): New functions.
(normal_stop): Return true if the hook-stop changes the stop
context.
* infrun.h (get_stop_id): Declare.
(normal_stop): Now returns int. Add documentation.
gdb/testsuite/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* gdb.base/hook-stop-continue.c: Delete.
* gdb.base/hook-stop-continue.exp: Delete.
* gdb.base/hook-stop-frame.c: Delete.
* gdb.base/hook-stop-frame.exp: Delete.
* gdb.base/hook-stop.c: New file.
* gdb.base/hook-stop.exp: New file.
This removes infcall-specific special casing from normal_stop,
simplifying it.
Like the "finish" command's, the FSM is responsible for storing the
function's return value.
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* infcall.c: Include thread_fsm.h.
(struct call_return_meta_info): New.
(get_call_return_value): New function, factored out from
call_function_by_hand_dummy.
(struct call_thread_fsm): New.
(call_thread_fsm_ops): New global.
(new_call_thread_fsm, call_thread_fsm_should_stop)
(call_thread_fsm_should_notify_stop): New functions.
(run_inferior_call): Add 'sm' parameter. Associate the FSM with
the thread.
(call_function_by_hand_dummy): Create a new call_thread_fsm
instance, associate it with the thread, and wait for the FSM to
finish. If finished successfully, fetch the function's result
value out of the FSM.
* infrun.c (fetch_inferior_event): If the FSM says the stop
shouldn't be notified, don't call normal_stop.
(maybe_remove_breakpoints): New function, factored out from ...
(normal_stop): ... here. Simplify.
* infrun.h (maybe_remove_breakpoints): Declare.
* thread-fsm.c (thread_fsm_should_notify_stop): New function.
(thread-fsm.h) <struct thread_fsm_ops>: New field.
(thread_fsm_should_notify_stop): Declare.
This adds an object oriented replacement for the "struct continuation"
mechanism, and converts the stepping commands (step, next, stepi,
nexti) and the "finish" commands to use it.
It adds a new thread "class" (struct thread_fsm) that contains the
necessary info and callbacks to manage the state machine of a thread's
execution command.
This allows getting rid of some hacks. E.g., in fetch_inferior_event
and normal_stop we no longer need to know whether a thread is doing a
multi-step (e.g., step N). This effectively makes the
intermediate_continuations unused -- they'll be garbage collected in a
separate patch. (They were never a proper abstraction, IMO. See how
fetch_inferior_event needs to check step_multi before knowing whether
to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.)
The target async vs !async uiout hacks in mi_on_normal_stop go away
too.
print_stop_event is no longer called from normal_stop. Instead it is
now called from within each interpreter's normal_stop observer. This
clears the path to make each interpreter print a stop event the way it
sees fit. Currently we have some hacks in common code to
differenciate CLI vs TUI vs MI around this area.
The "finish" command's FSM class stores the return value plus that
value's position in the value history, so that those can be printed to
both MI and CLI's streams. This fixes the CLI "finish" command when
run from MI -- it now also includes the function's return value in the
CLI stream:
(gdb)
~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n"
~"35\t}\n"
+~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
-FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output
+PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add thread-fsm.o.
* breakpoint.c (handle_jit_event): Print debug output.
(bpstat_what): Split event callback handling to ...
(bpstat_run_callbacks): ... this new function.
(momentary_bkpt_print_it): No longer handle bp_finish here.
* breakpoint.h (bpstat_run_callbacks): Declare.
* gdbthread.h (struct thread_info) <step_multi>: Delete field.
<thread_fsm>: New field.
(thread_cancel_execution_command): Declare.
* infcmd.c: Include thread-fsm.h.
(struct step_command_fsm): New.
(step_command_fsm_ops): New global.
(new_step_command_fsm, step_command_fsm_prepare): New functions.
(step_1): Adjust to use step_command_fsm_prepare and
prepare_one_step.
(struct step_1_continuation_args): Delete.
(step_1_continuation): Delete.
(step_command_fsm_should_stop): New function.
(step_once): Delete.
(step_command_fsm_clean_up, step_command_fsm_async_reply_reason)
(prepare_one_step): New function, based on step_once.
(until_next_command): Remove step_multi reference.
(struct return_value_info): New.
(print_return_value): Rename to ...
(print_return_value_1): ... this. New struct return_value_info
parameter. Adjust.
(print_return_value): Reimplement as wrapper around
print_return_value_1.
(struct finish_command_fsm): New.
(finish_command_continuation): Delete.
(finish_command_fsm_ops): New global.
(new_finish_command_fsm, finish_command_fsm_should_stop): New
functions.
(finish_command_fsm_clean_up, finish_command_fsm_return_value):
New.
(finish_command_continuation_free_arg): Delete.
(finish_command_fsm_async_reply_reason): New.
(finish_backward, finish_forward): Change symbol parameter to a
finish_command_fsm. Adjust.
(finish_command): Create a finish_command_fsm. Adjust.
* infrun.c: Include "thread-fsm.h".
(clear_proceed_status_thread): Delete the thread's FSM.
(infrun_thread_stop_requested_callback): Cancel the thread's
execution command.
(clean_up_just_stopped_threads_fsms): New function.
(fetch_inferior_event): Handle the event_thread's should_stop
method saying the command isn't done yet.
(process_event_stop_test): Run breakpoint callbacks here.
(print_stop_event): Rename to ...
(print_stop_location): ... this.
(restore_current_uiout_cleanup): New function.
(print_stop_event): Reimplement.
(normal_stop): No longer notify the end_stepping_range observers
here handle "step N" nor "finish" here. No longer call
print_stop_event here.
* infrun.h (struct return_value_info): Forward declare.
(print_return_value): Declare.
(print_stop_event): Change prototype.
* thread-fsm.c: New file.
* thread-fsm.h: New file.
* thread.c: Include "thread-fsm.h".
(thread_cancel_execution_command): New function.
(clear_thread_inferior_resources): Call it.
* cli/cli-interp.c (cli_on_normal_stop): New function.
(cli_interpreter_init): Install cli_on_normal_stop as normal_stop
observer.
* mi/mi-interp.c: Include "thread-fsm.h".
(restore_current_uiout_cleanup): Delete.
(mi_on_normal_stop): If the thread has an FSM associated, and it
finished, ask it for the async-reply-reason to print. Always call
print_stop_event here, regardless of the top-level interpreter.
Check bpstat_what to tell whether an asynchronous breakpoint hit
triggered.
* tui/tui-interp.c (tui_on_normal_stop): New function.
(tui_init): Install tui_on_normal_stop as normal_stop observer.
gdb/testsuite/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-cli.exp: Add CLI finish tests.
This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.
Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
The main motivation for this is making non-stop / all-stop behave
similarly on initial connection, in order to move in the direction of
reimplementing all-stop mode with the remote target always running in
non-stop mode.
When we connect to a remote target in non-stop mode, we may find
threads either running or already stopped. The act of connecting
itself does not force threads to stop. To handle that, the remote
non-stop connection is currently roughly like this:
#1 - Fetch list of remote threads (qXfer:threads:read, qfThreadInfo,
etc). All threads are assumed to be running until the target
reports an asynchronous stop reply for them.
#2 - Fetch the initial set of threads that were already stopped, with
the '?' packet. (In non-stop, this is coupled with the vStopped
mechanism to be able to retrieve the status of more than one
thread.)
The stop replies fetched in #2 are placed in the pending stop reply
queue, and left for the regular event loop to process. That is,
"target remote" finishes and returns _before_ those stops are
processed.
That means that it's possible to have GDB process further commands
before the initial set of stopped threads is reported to the user.
E.g., before the patch, note how the prompt is printed before the
frame:
Remote debugging using :9999
(gdb)
[Thread 15296] #1 stopped.
0x0000003615a011f0 in ?? ()
Even though thread #1 was not running, for a moment, the user can see
it as such:
$ gdb a.out -ex "set non-stop 1" -ex "tar rem :9999" -ex "info threads" -ex "info registers"
Remote debugging using :9999
Id Target Id Frame
* 1 Thread 4772 (running)
Target is executing. <<<<<<< info registers
(gdb)
[Thread 4772] #1 stopped.
0x0000003615a011f0 in ?? ()
To fix that, this commit makes gdb process all threads found already
stopped at connection time, before giving the prompt to the user.
The fix takes a cue from fork-child.c:startup_inferior [1], and
processes the events locally in remote.c, avoiding the whole
wait_for_inferior/handle_inferior_event path. I decided to try this
approach after noticing that:
- several cases in handle_inferior_event miss checking stop_soon.
- we don't want to fetch the thread list in normal_stop.
and trying to fix them was resulting in sprinkling stop_soon checks in
many places, and uglifying normal_stop even more.
While with this patch, I'm avoiding changing GDB's output other than
when the prompt is printed, I think this approach is more flexible if
we do want to change it. And also, it's likely easier to get rid of
the MI *running event that is still sent for threads that are
initially found stopped, if we want to.
This happens to fix the testsuite too. All non-stop tests are racy
against "target remote" / gdbserver testing currently. That is,
sometimes the tests run, but other times they're just skipped without
any indication of PASS/FAIL. When that happens, the logs show:
target remote localhost:2346
Remote debugging using localhost:2346
(gdb)
[Thread 25418] #1 stopped.
0x0000003615a011f0 in ?? ()
^CQuit
(gdb) Remote debugging from host 127.0.0.1
Killing process(es): 25418
monitor exit
(gdb) Remote connection closed
(gdb) testcase /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/multi-create-ns-info-thr.exp completed in 61 seconds
The trouble here is that there's output after the prompt, and the
regex in question doesn't expect that:
-re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
[1] - before startup_inferior was added, we'd go through
wait_for_inferior/handle_inferior_event while going through the shell,
and that turned out problematic.
Tested on x86_64 Fedora 20, gdbserver.
gdb/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* infrun.c (print_target_wait_results): Make extern.
* infrun.h (print_target_wait_results): Declare.
* remote.c (set_stop_requested_callback): Delete.
(process_initial_stop_replies): New function.
(remote_start_remote): Use it.
(stop_reply_queue_length): New function.
gdb/testsuite/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* gdb.server/connect-stopped-target.c: New file.
* gdb.server/connect-stopped-target.exp: New file.
That is, step past breakpoints by:
- pausing all threads
- removing breakpoint at PC
- single-step
- reinsert breakpoint
- restart threads
similarly to all-stop (with displaced stepping disabled). This allows
non-stop to work on targets/architectures without displaced stepping
support. That is, it makes displaced stepping an optimization instead
of a requirement. For example, in principle, all GNU/Linux ports
support non-stop mode at the target_ops level, but not all
corresponding gdbarch's implement displaced stepping. This should
make non-stop work for all (albeit, not as efficiently). And then
there are scenarios where even if the architecture supports displaced
stepping, we can't use it, because we e.g., don't find a usable
address to use as displaced step scratch pad. It should also fix
stepping past watchpoints on targets that have non-continuable
watchpoints in non-stop mode (e.g., PPC, untested). Running the
instruction out of line in the displaced stepping scratch pad doesn't
help that case, as the copied instruction reads/writes the same
watched memory... We can fix that too by teaching GDB to only remove
the watchpoint from the thread that we want to move past the
watchpoint (currently, removing a watchpoint always removes it from
all threads), but again, that can be considered an optimization; not
all targets would support it.
For those familiar with the gdb and gdbserver Linux target_ops
backends, the implementation should look similar, except it is done on
the core side. When we pause threads, we may find they stop with an
interesting event that should be handled later when the thread is
re-resumed, thus we store such events in the thread object, and mark
the event as pending. We should only consume pending events if the
thread is indeed resumed, thus we add a new "resumed" flag to the
thread object. At a later stage, we might add new target methods to
accelerate some of this, like "pause all threads", with corresponding
RSP packets, but we'd still need a fallback method for remote targets
that don't support such packets, so, again, that can be deferred as
optimization.
My _real_ motivation here is making it possible to reimplement
all-stop mode on top of the target always working on non-stop mode, so
that e.g., we can send RSP packets to a remote target even while the
target is running -- can't do that in the all-stop RSP variant, by
design).
Tested on x86_64 Fedora 20, with and without "set displaced off"
forced. The latter forces the new code paths whenever GDB needs to
step past a breakpoint.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (breakpoints_should_be_inserted_now): If any thread
has a pending status, return true.
* gdbthread.h: Include target/waitstatus.h.
(struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
stop_pc>: New fields.
(struct thread_info) <resumed>: New field.
(set_resumed): Declare.
* infrun.c: Include "event-loop.h".
(infrun_async_inferior_event_token, infrun_is_async): New globals.
(infrun_async): New function.
(clear_step_over_info): Add debug output.
(displaced_step_in_progress_any_inferior): New function.
(displaced_step_fixup): New returns int.
(start_step_over): Handle in-line step-overs too. Assert the
thread is marked resumed.
(resume_cleanups): Clear the thread's resumed flag.
(resume): Set the thread's resumed flag. Return early if the
thread has a pending status. Allow stepping a breakpoint with no
signal.
(proceed): Adjust to check 'resumed' instead of 'executing'.
(clear_proceed_status_thread): If the thread has a pending status,
and that status is a finished step, discard the pending status.
(clear_proceed_status): Don't clear step_over_info here.
(random_pending_event_thread, do_target_wait): New functions.
(prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
do_target_wait.
(wait_one): New function.
(THREAD_STOPPED_BY): New macro.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): New functions.
(switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
functions.
(handle_inferior_event): Also call set_resumed(false) on all
threads implicitly stopped by the event.
(restart_threads, resumed_thread_with_pending_status): New
functions.
(finish_step_over): If we were doing an in-line step-over before,
and no longer are after trying to start a new step-over, restart
all threads. If we have multiple threads with pending events,
save the current event and go through the event loop again.
(handle_signal_stop): Return early if finish_step_over returns
false.
<random signal>: If we get a signal while stepping over a
breakpoint in-line in non-stop mode, restart all threads. Clear
step_over_info before delivering the signal.
(keep_going_stepped_thread): Use internal_error instead of
gdb_assert. Mark the thread as resumed.
(keep_going_pass_signal): Assert the thread isn't already resumed.
If some other thread is doing an in-line step-over, defer the
resume. If we just started a new in-line step-over, stop all
threads. Don't clear step_over_info.
(infrun_async_inferior_event_handler): New function.
(_initialize_infrun): Create async event handler with
infrun_async_inferior_event_handler as callback.
(infrun_async): New declaration.
* target.c (target_async): New function.
* target.h (target_async): Declare macro and readd as function
declaration.
* target/waitstatus.h (enum target_stop_reason)
<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
* thread.c (new_thread): Clear the new waitstatus field.
(set_resumed): New function.
In order to teach non-stop mode to do in-line step-overs (pause all
threads, remove breakpoint, single-step, reinsert breakpoint, restart
threads), we'll need to be able to queue in-line step over requests,
much like we queue displaced stepping (out-of-line) requests.
Actually, the queue should be the same -- threads wait for their turn
to step past something (breakpoint, watchpoint), doesn't matter what
technique we end up using when the step over actually starts.
I found that the queue management ends up simpler and more efficient
if embedded in the thread objects themselves. This commit converts
the existing displaced stepping queue to that. Later patches will
make the in-line step-overs code paths use it too.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <step_over_prev,
step_over_next>: New fields.
(thread_step_over_chain_enqueue, thread_step_over_chain_remove)
(thread_step_over_chain_next, thread_is_in_step_over_chain): New
declarations.
* infrun.c (struct displaced_step_request): Delete.
(struct displaced_step_inferior_state) <step_request_queue>:
Delete field.
(displaced_step_prepare): Assert that trap_expected is set. Use
thread_step_over_chain_enqueue. Split starting a new displaced
step to ...
(start_step_over): ... this new function.
(resume): Assert the thread isn't waiting for a step over already.
(proceed): Assert the thread isn't waiting for a step over
already.
(infrun_thread_stop_requested): Adjust to remove threads from the
embedded step-over chain.
(handle_inferior_event) <fork/vfork>: Call start_step_over after
displaced_step_fixup.
(handle_signal_stop): Call start_step_over after
displaced_step_fixup.
* infrun.h (step_over_queue_head): New declaration.
* thread.c (step_over_chain_enqueue, step_over_chain_remove)
(thread_step_over_chain_next, thread_is_in_step_over_chain)
(thread_step_over_chain_enqueue)
(thread_step_over_chain_remove): New functions.
(delete_thread_1): Remove thread from the step-over chain.
Now stop_registers are no longer used and it can be removed.
I am not much sure what 'proceed_to_finish' really means now so I make a wild
guess while updating comments about it.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdbthread.h (struct thread_control_state): Update comment for
proceed_to_finish.
* infcall.c (run_inferior_call): Update comment about
proceed_to_finish.
* infcmd.c (get_return_value): Update comment about stop_registers.
(finish_forward): Update comment about proceed_to_finish.
* infrun.c (stop_registers): Remove.
(clear_proceed_status, normal_stop): Remove stop_registers handling.
* infrun.h (stop_registers): Remove.
... and move comment to declaration.
gdb/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* infrun.c (user_visible_resume_ptid): Rewrite going from
most-locked to unlocked instead of the opposite. Move comment ...
* infrun.h (user_visible_resume_ptid): ... here.
The "step" parameters of 'proceed' and 'resume' aren't really useful
as indication of whether run control wants to single-step the target,
as that information must already be retrievable from
currently_stepping. In fact, if currently_stepping disagrees with
whether we single-stepped the target, then things break. Thus instead
of having the same information in two places, this patch removes those
parameters.
Setting 'step_start_function' is the only user of proceed's 'step'
argument, other than passing the 'step' argument down to 'resume' and
debug log output. Move that instead to set_step_frame, where we
already set other related fields.
clear_proceed_status keeps its "step" parameter for now because it
needs to know which set of threads should have their state cleared,
and is called before the "stepping_command" flag is set.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* breakpoint.c (until_break_command): Adjust call to proceed.
* gdbthread.h (struct thread_control_state) <stepping_command>:
New field.
* infcall.c (run_inferior_call): Adjust call to proceed.
* infcmd.c (run_command_1, proceed_thread_callback, continue_1):
Adjust calls to proceed.
(set_step_frame): Set the current thread's step_start_function
here.
(step_once): Adjust calls to proceed.
(jump_command, signal_command, until_next_command)
(finish_backward, finish_forward, proceed_after_attach_callback)
(attach_command_post_wait): Adjust calls to proceed.
* infrun.c (proceed_after_vfork_done): Adjust call to proceed.
(do_target_resume): New function, factored out from ...
(resume): ... here. Remove 'step' parameter. Instead, check
currently_stepping to determine whether the thread should be
single-stepped.
(proceed): Remove 'step' parameter and don't set the thread's
step_start_function here. Adjust call to 'resume'.
(handle_inferior_event): Adjust calls to 'resume'.
(switch_back_to_stepped_thread): Use do_target_resume instead of
'resume'.
(keep_going): Adjust calls to 'resume'.
* infrun.h (proceed): Remove 'step' parameter.
(resume): Likewise.
* windows-nat.c (do_initial_windows_stuff): Adjust call to
'resume'.
* mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
When GDB finds out the target triggered a watchpoint, and the target
has non-continuable watchpoints, GDB sets things up to step past the
instruction that triggered the watchpoint. This is just like stepping
past a breakpoint, but goes through a different mechanism - it resumes
only the thread that needs to step past the watchpoint, but also
switches a "infwait state" global, that has the effect that the next
target_wait only wait for events only from that thread.
This forcing of a ptid to pass to target_wait obviously becomes a
bottleneck if we ever support stepping past different watchpoints
simultaneously (in separate processes).
It's also unnecessary -- the target should only return events for
threads that have been resumed; if no other thread than the one we're
stepping past the watchpoint has been resumed, then those other
threads should not report events. If we couldn't assume that, then
stepping past regular breakpoints would be broken for not likewise
forcing a similar infwait_state.
So this patch eliminates infwait_state, and instead teaches keep_going
to mark step_over_info in a way that has the breakpoints module skip
inserting watchpoints (because we're stepping past one), like it skips
breakpoints when we're stepping past one.
Tested on:
- x86_64 Fedora 20 (continuable watchpoints)
- PPC64 Fedora 18 (non-steppable watchpoints)
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (should_be_inserted): Don't insert watchpoints if
trying to step past a non-steppable watchpoint.
* gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New
field.
* infrun.c (struct step_over_info): Add new field
'nonsteppable_watchpoint_p' and adjust comments.
(set_step_over_info): New 'nonsteppable_watchpoint_p' parameter.
Adjust.
(clear_step_over_info): Clear nonsteppable_watchpoint_p as well.
(stepping_past_nonsteppable_watchpoint): New function.
(step_over_info_valid_p): Also return true if stepping past a
nonsteppable watchpoint.
(proceed): Adjust call to set_step_over_info. Remove reference to
init_infwait_state.
(init_wait_for_inferior): Remove reference to init_infwait_state.
(waiton_ptid): Delete global.
(struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: Delete field.
(wait_for_inferior, fetch_inferior_event): Always pass
minus_one_ptid to target_wait.
(init_thread_stepping_state): Clear 'stepping_over_watchpoint'
field.
(init_infwait_state): Delete function.
(handle_inferior_event): Remove infwait_state handling.
(handle_signal_stop) <watchpoints handling>: Adjust after
stepped_after_stopped_by_watchpoint removal. Don't remove
breakpoints here nor set infwait_state. Set the thread's
stepping_over_watchpoint flag, and call keep_going instead.
(keep_going): Handle stepping_over_watchpoint. Adjust
set_step_over_info calls.
* infrun.h (stepping_past_nonsteppable_watchpoint): Declare
function.
This patch reorganizes the code that implements follow-fork and
detach-on-fork in preparation for implementation of those features for the
extended-remote target. The function linux-nat.c:linux_child_follow_fork
contained target-independent code mixed in with target-dependent code. The
target-independent pieces need to be accessible for the host-side
implementation of follow-fork for extended-remote Linux targets.
The changes are fairly mechanical. A new routine, follow_fork_inferior,
is implemented in infrun.c, containing those parts of
linux_child_follow_fork that manage inferiors and the inferior list. The
parts of linux_child_follow_fork that deal with LWPs and target-specifics
were left in-place. Although the order of some operations was changed, the
resulting functionality was not.
Modifications were made to the other native target follow-fork functions,
inf_ttrace_follow_fork and inf_ptrace_follow_fork, that should allow them
to work with follow_fork_inferior. Some other adjustments were necessary
in inf-ttrace.c. The changes to inf-ttrace.c and inf-ptrace.c were not
tested.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_follow_fork): Remove target-independent
code so as to work with follow_fork_inferior.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
(inf_ttrace_create_inferior): Remove reference to
inf_ttrace_vfork_ppid.
(inf_ttrace_attach): Ditto.
(inf_ttrace_detach): Ditto.
(inf_ttrace_kill): Use current_inferior instead of
inf_ttrace_vfork_ppid.
(inf_ttrace_wait): Eliminate use of inf_ttrace_vfork_ppid, report
TARGET_WAITKIND_VFORK_DONE event, delete HACK that switched the
inferior away from the parent.
* infrun.c (follow_fork): Call follow_fork_inferior instead of
target_follow_fork.
(follow_fork_inferior): New function.
(follow_inferior_reset_breakpoints): Make function static.
* infrun.h (follow_inferior_reset_breakpoints): Remove declaration.
* linux-nat.c (linux_child_follow_fork): Move target-independent
code to infrun.c:follow_fork_inferior.
This commit moves the inclusion of ptid.h to common-defs.h and removes
all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ptid.h.
* defs.h: Do not include ptid.h.
* inferior.h: Likewise.
* infrun.h: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.h: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ptid.h.
* notif.h: Likewise.
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
Ignoring expected and desired differences like whether the prompt is
output after *stoppped records, GDB MI output is still different in
sync and async modes.
In sync mode, when a CLI execution command is entered, the "reason"
field is missing in the *stopped async record. And in async mode, for
some events, like program exits, the corresponding CLI output is
missing in the CLI channel.
Vis, diff between sync vs async modes:
run
^running
*running,thread-id="1"
(gdb)
...
- ~"[Inferior 1 (process 15882) exited normally]\n"
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
- *stopped
+ *stopped,reason="exited-normally"
si
...
(gdb)
~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n"
- *stopped,frame=...,thread-id="1",stopped-threads="all",core="0"
+ *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0"
(gdb)
In addition, in both cases, when a MI execution command is entered,
and a breakpoint triggers, the event is sent to the console too. But
some events like program exits have the CLI output missing in the CLI
channel:
-exec-run
^running
*running,thread-id="1"
(gdb)
...
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
- *stopped
+ *stopped,reason="exited-normally"
We'll want to make background commands always possible by default.
IOW, make target-async be the default. But, in order to do that,
we'll need to emulate MI sync on top of an async target. That means
we'll have yet another combination to care for in the testsuite.
Rather than making the testsuite cope with all these differences, I
thought it better to just fix GDB to always have the complete output,
no matter whether it's in sync or async mode.
This is all related to interpreter-exec, and the corresponding uiout
switching. (Typing a CLI command directly in MI is shorthand for
running it through -interpreter-exec console.)
In sync mode, when a CLI command is active, normal_stop is called when
the current interpreter and uiout are CLI's. So print_XXX_reason
prints the stop reason to CLI uiout (only), and we don't show it in
MI.
In async mode the stop event is processed when we're back in the MI
interpreter, so the stop reason is printed directly to the MI uiout.
Fix this by making run control event printing roughly independent of
whatever is the current interpreter or uiout. That is, move these
prints to interpreter observers, that know whether to print or be
quiet, and if printing, which uiout to print to. In the case of the
console/tui interpreters, only print if the top interpreter. For MI,
always print.
Breakpoint hits / normal stops are already handled similarly -- MI has
a normal_stop observer that prints the event to both MI and the CLI,
though that could be cleaned up further in the direction of this
patch.
This also makes all of:
(gdb) foo
and
(gdb) interpreter-exec MI "-exec-foo"
and
(gdb)
-exec-foo
and
(gdb)
-interpreter-exec console "foo"
print as expected.
Tested on x86_64 Fedora 20, sync and async modes.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* cli/cli-interp.c: Include infrun.h and observer.h.
(cli_uiout, cli_interp): New globals.
(cli_on_signal_received, cli_on_end_stepping_range)
(cli_on_signal_exited, cli_on_exited, cli_on_no_history): New
functions.
(cli_interpreter_init): Install them as 'end_stepping_range',
'signal_received' 'signal_exited', 'exited' and 'no_history'
observers.
(_initialize_cli_interp): Remove cli_interp local.
* infrun.c (handle_inferior_event): Call the several stop reason
observers instead of printing the stop reason directly.
(end_stepping_range): New function.
(print_end_stepping_range_reason, print_signal_exited_reason)
(print_exited_reason, print_signal_received_reason)
(print_no_history_reason): Make static, and add an uiout
parameter. Print to that instead of to CURRENT_UIOUT.
* infrun.h (print_end_stepping_range_reason)
(print_signal_exited_reason, print_exited_reason)
(print_signal_received_reason print_no_history_reason): New
declarations.
* mi/mi-common.h (struct mi_interp): Rename 'uiout' field to
'mi_uiout'.
<cli_uiout>: New field.
* mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new
uiout for CLI output. Install 'signal_received',
'end_stepping_range', 'signal_exited', 'exited' and 'no_history'
observers.
(find_mi_interpreter, mi_interp_data, mi_on_signal_received)
(mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
(mi_on_no_history): New functions.
(ui_out_free_cleanup): Delete function.
(mi_on_normal_stop): Don't allocate a new uiout for CLI output,
instead use the one already stored in the MI interpreter data.
(mi_ui_out): Adjust.
* tui/tui-interp.c: Include infrun.h and observer.h.
(tui_interp): New global.
(tui_on_signal_received, tui_on_end_stepping_range)
(tui_on_signal_exited, tui_on_exited)
(tui_on_no_history): New functions.
(tui_init): Install them as 'end_stepping_range',
'signal_received' 'signal_exited', 'exited' and 'no_history'
observers.
(_initialize_tui_interp): Delete tui_interp local.
gdb/doc/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* observer.texi (signal_received, end_stepping_range)
(signal_exited, exited, no_history): New observer subjects.
gdb/testsuite/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
reason, even in sync mode.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Simon Marchi
Simon Marchi
Pedro Alves
Joel Brobecker
Christian Biesinger
Tom Tromey
Tom Tromey
Simon Marchi
Andrew Burgess
Yao Qi
Jan Kratochvil
Don Breazeal
Gary Benson