This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
Add a new option to get the linker to emit PLTs that use compact
branches instead of delay slot branches.
bfd/
* elfxx-mips.c (LA25_BC): New macro.
(mips_elf_link_hash_table)<compact_branches>: New field.
(STUB_JALRC): New macro.
(mipsr6_o32_exec_plt0_entry_compact): New array.
(mipsr6_n32_exec_plt0_entry_compact): Likewise.
(mipsr6_n64_exec_plt0_entry_compact): Likewise.
(mipsr6_exec_plt_entry_compact): Likewise.
(mips_elf_create_la25_stub): Use BC instead of J for stubs
when compact_branches is true.
(_bfd_mips_elf_finish_dynamic_symbol): Choose the compact
PLT for MIPSR6 with compact_branches. Do not reorder the
compact branches PLT. Switch the lazy stub for MIPSR6
with compact_branches to use JALRC.
(mips_finish_exec_plt): Choose the compact PLT0 for MIPSR6
when compact_branches is true.
(_bfd_mips_elf_compact_branches): New function.
* elfxx-mips.h (_bfd_mips_elf_compact_branches): New prototype.
ld/
* emultempl/mipself.em (compact_branches): New static variable.
(mips_create_output_section_statements): Call
_bfd_mips_elf_compact_branches.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_COMPACT_BRANCHES and
OPTION_NO_COMPACT_BRANCHES.
(PARSE_AND_LIST_LONGOPTS): Add compact-branches,
no-compact-branches.
(PARSE_AND_LIST_OPTIONS): Add --compact-branches,
--no-compact-branches.
(PARSE_AND_LIST_ARGS_CASES): Handle the above.
* ld.texinfo: Document --compact-branches, --no-compact-branches.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.gd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-r6.s: New test source.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
We have an issue in the MIPS backend, with the handling of undefined
hidden and internal weak symbols. References to such symbols are
supposed to resolve to 0 according to the ELF gABI[1]:
"Unresolved weak symbols have a zero value."
and the 64-bit MIPS psABI[2]:
"If a symbol with one of these [hidden or internal] attributes has no
definition within the executable/DSO being linked, then it must be
resolved to allocated space if common, resolved to zero if weak, or an
error reported otherwise."
however if a GOT relocation is used, then a local GOT entry is created
and used to satisfy the reference. Such an entry is then (in DSO and
PIE binaries) subject to the usual load-time relocation, which means a
non-zero value will be returned if the base address is non-zero. This
will defeat the usual run-time sequence like:
void a (void) __attribute__ ((visibility ("hidden"), weak));
void
x (void)
{
if (a)
a ();
}
This can be reproduced with this simple code:
$ cat libtest.c
extern int a __attribute__ ((visibility ("hidden"), weak));
int *
x (void)
{
return &a;
}
$ cat test.c
int *x (void);
int
main (void)
{
printf ("a: %p\n", x ());
return 0;
}
$ gcc -shared -fPIC -o libtest.so libtest.c
$ gcc -o test test.c -Wl,-rpath,$(pwd) libtest.so
$ ./test
a: 0x77184000
$
The usual approach targets take is making all the steps required to
assign a GOT entry for the symbol referred, and then leave its contents
at zero with no dynamic relocation attached, therefore ensuring that the
value does not change at load time. However this is not going to work
with the implicitly relocated GOT the MIPS psABI specifies[3]:
"The dynamic linker relocates the global offset table by first adding
the difference between the base where the shared object is loaded and
the value of the dynamic tag DT_MIPS_BASE_ADDRESS to all local global
offset table entries."
and we cannot therefore use the local GOT part.
And we cannot offhand use the global part either, as the symbol would
then have to be exported and possibly wrongly preempt symbols in other
modules involved in the dynamic load, because as per the ELF gABI[1] we
are not allowed to enter a hidden or internal symbol into the dynamic
symbol table (and then use its associated GOT entry):
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
and:
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
So we have to choose something else.
Our choice is further limited by the need for the reference associated
with the GOT relocation to stay within the signed 16-bit limit from the
GOT pointer base register, while being compliant with the ELF gABI and
the MIPS psABI. However as Alan Modra has observed[4] one possibility
is to edit (relax) the code such that the GOT reference is removed
altogether.
Based on these observations then modify MIPS BFD linker backend code to:
1. Interpret code associated with GOT relocations and relax the usual LW
or LD instructions into a corresponding immediate load operation that
places the value of 0 in the intended register, while leaving the GOT
entry allocated and initialized as usually.
2. Leave any other instructions associated with GOT relocations in place
and instead redirect the reference to a global GOT entry associated
with a special `__gnu_absolute_zero' symbol created for this purpose,
whose value is 0, SHN_ABS section marks it absolute, binding is
global and export class protected, ensuring that the locally provided
value is always used at load time, and that the value is not
relocated by the dynamic loader.
3. Adjust any high-part GOT relocation used, typically associated with
a LUI instruction, accordingly, so that run-time consistency is
maintained, either by resolving to the original entry if the
instruction associated with the corresponding low-part GOT relocation
has been relaxed to an immediate load (in which case the value loaded
with LUI will be overwritten), or by also redirecting the reference
to `__gnu_absolute_zero' to complete the GOT access sequence if that
symbol has been used.
4. Add a target `elf_backend_hide_symbol' hook, for the three MIPS ABIs,
which prevents the `__gnu_absolute_zero' symbol from being forced
local, to ensure that the redirection works and the symbol remains
global/protected with existing linker scripts unchanged.
5. Observing the issue with handling SHN_ABS symbols in the GNU dynamic
loader, covered by glibc PR 19818, set the EI_ABIVERSION field in the
ELF file header produced to 4 (ABI_ABSOLUTE) if `__gnu_absolute_zero'
symbol has been produced and the target configured indicates the GNU
operating system, so that broken versions of the GNU dynamic loader
gracefully reject the file in loading rather than going astray. Keep
EI_ABIVERSION at the original value for other operating systems or if
no `__gnu_absolute_zero' symbol has been made.
The name of the special `__gnu_absolute_zero' has no meaning other than
how a human reader can interpret it, as it is ignored in dynamic loading
in the handling of the scenarios concerned. This is because the symbol
resolves locally, and it's only the symbol's attributes that matter so
that the associated GOT entry remains unchanged at load time.
Therefore the name is somewhat arbitrary, observing however the need to
use the name space reserved for the system so that it does not conflict
with a possible user symbol, and hence the leading underscore, and also
the `gnu' infix to denote a GNU feature. Other implementations wishing
to address the problem in a similar way may choose a different name and
have the solution still work, possibly with a mixture of modules used in
a dynamic having symbols of different names provided, which will however
not interact with each other due to the protected export class.
The symbol can be referred explicitly, however the name is an internal
implementation detail rather than a part of the ABI, and therefore no
specific semantics is guaranteed.
One limitation of this change is that if `__gnu_absolute_zero' has been
already defined, then we do not wipe the old definition and all kinds of
odd behavior can result. This is however like with other symbols we
internally define, such as `_GLOBAL_OFFSET_TABLE_' or `__rld_map', and
therefore left as a possible future enhancement.
As an optimization the relaxation of LW and LD instructions to a load of
immediate zero is always made, even SVR4 PIC code for code that will end
up in a regular (non-PIE) executable, because there is a cache advantage
with the avoidance of a load from the GOT, even if it is otherwise
guaranteed to remain zero. It does not reliably happen though, due to a
symbol exportation issue affecting executables, covered by PR ld/21805.
One existing test case needs to be updated, as it triggers relaxation
introduced with this change and consequently linker output does not
match expectations anymore. As we want to keep the original issue
covered with the test case modify it then to use the LWL instruction in
place of LW, and adjust the output expected accordingly.
References:
[1] "System V Application Binary Interface - DRAFT - 19 October 2010",
The SCO Group, Section "Symbol Table",
<http://www.sco.com/developers/gabi/2012-12-31/ch4.symtab.html>
[2] "64-bit ELF Object File Specification, Draft Version 2.5", MIPS
Technologies / Silicon Graphics Computer Systems, Order Number
007-4658-001, Section 2.5 "Symbol Table", p. 22,
<http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf>
[3] "SYSTEM V APPLICATION BINARY INTERFACE, MIPS RISC Processor
Supplement, 3rd Edition", Section "Global Offset Table", p. 5-10,
<http://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf>
[4] "Undo dynamic symbol state after regular object sym type mismatch",
<https://sourceware.org/ml/binutils/2017-07/msg00265.html>
bfd/
PR ld/21375
* elfxx-mips.h (_bfd_mips_elf_hide_symbol): New prototype.
(_bfd_mips_elf_linker_flags): Update prototype.
* elf32-mips.c (elf_backend_hide_symbol): New macro.
* elf64-mips.c (elf_backend_hide_symbol): Likewise.
* elfn32-mips.c (elf_backend_hide_symbol): Likewise.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`use_absolute_zero' and `gnu_target' members.
(mips_elf_record_global_got_symbol): Call
`_bfd_mips_elf_hide_symbol' rather than
`_bfd_elf_link_hash_hide_symbol'.
(mips_use_local_got_p): Return FALSE if the symbol is absolute.
(mips_elf_obtain_contents): Reorder function.
(mips_elf_nullify_got_load): New function.
(mips_elf_calculate_relocation): Add `contents' parameter.
Nullify GOT loads or if it is not possible, then redirect GOT
relocations to the `__gnu_absolute_zero' symbol, for references
that are supposed to resolve to zero.
(mips_elf_define_absolute_zero): New function.
(_bfd_mips_elf_check_relocs): Prepare for arrangements made in
`mips_elf_calculate_relocation' for references made via the GOT
that are supposed to resolve to zero.
(_bfd_mips_elf_hide_symbol): New function.
(_bfd_mips_elf_linker_flags): Add the `gnu_target' parameter,
set the `gnu_target' member of the MIPS hash table.
(MIPS_LIBC_ABI_ABSOLUTE): New enumeration constant.
(_bfd_mips_post_process_headers): Use it.
ld/
PR ld/21375
* emultempl/mipself.em: Set `gnu_target' according to ${target}.
(mips_create_output_section_statements): Update call to
`_bfd_mips_elf_linker_flags'.
* testsuite/ld-mips-elf/pr21334.s: Use LWL rather than LW.
* testsuite/ld-mips-elf/pr21334.dd: Update accordingly.
Complement commit e17b0c351f ("MIPS/BFD: Respect the ELF gABI dynamic
symbol table sort requirement") and correct an inconsistency in dynamic
symbol accounting data causing an assertion failure in the MIPS backend:
ld: BFD (GNU Binutils) 2.28.51.20170330 assertion fail
../../binutils-gdb/bfd/elfxx-mips.c:3860
in the course of making a GOT entry in a static binary to satisfy a GOT
relocation present in input, due to the local dynamic symbol count not
having been established.
To do so let backends request `_bfd_elf_link_renumber_dynsyms' to be
always called, rather than where a dynamic binary is linked only, and
then make this request in the MIPS backend.
bfd/
PR ld/21334
* elf-bfd.h (elf_backend_data): Add `always_renumber_dynsyms'
member.
* elfxx-target.h [!elf_backend_always_renumber_dynsyms]
(elf_backend_always_renumber_dynsyms): Define.
(elfNN_bed): Initialize `always_renumber_dynsyms' member.
* elfxx-mips.h (elf_backend_always_renumber_dynsyms): Define.
* elflink.c (bfd_elf_size_dynamic_sections): Also call
`_bfd_elf_link_renumber_dynsyms' if the backend has requested
it.
(bfd_elf_size_dynsym_hash_dynstr): Likewise.
ld/
PR ld/21334
* testsuite/ld-mips-elf/pr21334.dd: New test.
* testsuite/ld-mips-elf/pr21334.gd: New test.
* testsuite/ld-mips-elf/pr21334.ld: New test linker script.
* testsuite/ld-mips-elf/pr21334.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Remove separate original NewABI JALR relocation handling, introduced
with commit d06471104a ("relax jalr $t9 [R_MIPS_JALR symbol] to bal
symbol"), <https://sourceware.org/ml/binutils/2003-03/msg00394.html>,
and only used by LD with the `--relax' option specified, and rely solely
on `mips_elf_perform_relocation' code, which has been introduced with
commit 1367d393bb ("On the RM9000 convert jal to bal if in range"),
<https://www.sourceware.org/ml/binutils/2004-12/msg00088.html> and since
made more complete, across all the three ABIs.
Also remove the `--relax' option, now irrelevant, from the tests added
with the former commit.
bfd/
* elfxx-mips.h (_bfd_mips_relax_section): Remove prototype.
* elfxx-mips.c (_bfd_mips_relax_section): Remove function.
* elf64-mips.c (bfd_elf64_bfd_relax_section): Remove macro.
* elfn32-mips.c (bfd_elf32_bfd_relax_section): Likewise.
ld/
* testsuite/ld-mips-elf/relax-jalr-n32.d: Remove `--relax'
option.
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
Complement commit 9d862524f6 ("MIPS: Verify the ISA mode and alignment
of branch and jump targets") and add GAS and LD options to control the
checks for invalid branches between ISA modes introduced there, to help
with some handwritten code lacking `.insn' annotation for labels used as
branch targets and code produced by older versions of GCC which suffers
from the issue with branches to code that has been optimized away,
addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with
`.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>.
bfd/
* elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to...
(_bfd_mips_elf_linker_flags): ... this. Add another parameter.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`ignore_branch_isa' member.
(mips_elf_perform_relocation): Do not treat an ISA mode mismatch
in branch relocation calculation as an error if
`ignore_branch_isa' has been set.
(_bfd_mips_elf_insn32): Rename to...
(_bfd_mips_elf_linker_flags): ... this. Rename the `on'
parameter to `insn32' and add an `ignore_branch_isa' parameter.
Handle the new parameter.
gas/
* config/tc-mips.c (mips_ignore_branch_isa): New variable.
(options): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(md_longopts): Add "mignore-branch-isa" and
"mno-ignore-branch-isa" options.
(md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
(fix_bad_cross_mode_branch_p): Return FALSE if
`mips_ignore_branch_isa' has been set.
(md_show_usage): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa'.
* doc/as.texinfo (Target MIPS options): Add
`-mignore-branch-isa' and `-mno-ignore-branch-isa' options.
(-mignore-branch-isa, -mno-ignore-branch-isa): New options.
* doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa' options.
* testsuite/gas/mips/branch-local-ignore-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-3.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* emultempl/mipself.em (ignore_branch_isa): New variable.
(mips_create_output_section_statements): Rename
`_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags',
add `ignore_branch_isa' argument.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and
"no-ignore-branch-isa" options.
(PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and
`--no-ignore-branch-isa'.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
* ld.texinfo (Options specific to MIPS targets): Add
`--ignore-branch-isa' and `--no-ignore-branch-isa' options.
(ld and the MIPS family): Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New
test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
HI16/LO16 are deliberately put adjacent, which might mean relocs are
then not sorted by r_offset. See tc-mips.c:mips_frob_file. Don't undo
the HI16/LO16 sorting.
PR 17666
* elf-bfd.h (struct elf_backend_data): Add sort_relocs_p.
* elfxx-target.h (elf_backend_sort_relocs_p): Define.
(elfNN_bed): Init new field.
* elflink.c (elf_link_adjust_relocs): Conditionally sort.
(bfd_elf_final_link): Control sorting of relocs.
* elfxx-mips.c (_bfd_mips_elf_sort_relocs_p): New function.
* elfxx-mips.h (_bfd_mips_elf_sort_relocs_p): Declare.
* elf32-mips.c (elf_backend_sort_relocs_p): Define.
* elf64-mips.c (elf_backend_sort_relocs_p): Define.
* elfxx-mips.h (elfxx-mips.h): Declare.
* elfxx-mips.c (mips_elf_merge_obj_attributes): Use it to report
Tag_GNU_MIPS_ABI_FP mismatches.
(_bfd_mips_fp_abi_string): New function.
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
Maxim Kuvyrkov <maxim@codesourcery.com>
* elf32-mips.c (mips_vxworks_copy_howto_rela): Replace with...
(elf_mips_copy_howto): ...this howto. Clear the size fields.
(mips_vxworks_jump_slot_howto_rela): Replace with...
(elf_mips_jump_slot_howto): ...this howto.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_plt_readonly): Define.
(elf_backend_plt_sym_val): Define for non-VxWorks targets.
(mips_vxworks_bfd_reloc_type_lookup): Delete.
(mips_vxworks_bfd_reloc_name_lookup): Likewise.
(mips_vxworks_rtype_to_howto): Likewise.
(elf_backend_want_dynbss): Don't define for VxWorks.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_got_symbol_offset): Don't define.
* elfn32-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_n32_rtype_to_howto): Handle R_MIPS_COPY and
R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elf64-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf64_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf64_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf64_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Delete.
(_bfd_mips_elf_use_plts_and_copy_relocs, _bfd_mips_elf_init_stubs)
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): Declare.
* elfxx-mips.c (mips_elf_la25_stub): New structure.
(LA25_LUI, LA25_J, LA25_ADDIU): New macros.
(mips_elf_link_hash_entry): Add "la25_stubs", "has_static_relocs"
and "has_nonpic_branches" fields. Remove "is_relocation_target" and
"is_branch_target".
(mips_elf_link_hash_table): Add blank lines. Add
"use_plts_and_copy_relocs", "reserved_gotno", "strampoline",
"la25_stubs" and "add_stub_section" fields.
(mips_htab_traverse_info): New structure.
(PIC_OBJECT_P, MIPS_ELF_LOAD_WORD): New macros.
(MIPS_RESERVED_GOTNO): Delete.
(mips_o32_exec_plt0_entry, mips_n32_exec_plt0_entry)
(mips_n64_exec_plt0_entry, mips_exec_plt_entry): New tables.
(mips_elf_link_hash_newfunc): Update after the changes to
mips_elf_link_hash_entry.
(mips_elf_check_mips16_stubs): Replace the DATA parameter with
an INFO parameter. Don't look through warnings symbols here;
do it in mips_elf_check_symbols instead.
(mips_elf_create_stub_symbol): New function.
(mips_elf_la25_stub_hash, mips_elf_la25_stub_eq): New functions.
(_bfd_mips_elf_init_stubs, mips_elf_local_pic_function_p): Likewise.
(mips_elf_add_la25_intro, mips_elf_add_la25_trampoline): Likewise.
(mips_elf_add_la25_stub, mips_elf_check_symbols): New functions.
(mips_elf_gotplt_index): Check for VxWorks.
(mips_elf_output_dynamic_relocation): Take the relocation index
as an extra parameter. Do not increment reloc_count here.
(mips_elf_initialize_tls_slots): Update the calls to
mips_elf_output_dynamic_relocation accordingly.
(mips_elf_multi_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Don't allocate reserved GOT
entries here. Unconditionally create .got.plt, but don't
set its alignment here.
(mips_elf_relocation_needs_la25_stub): New function.
(mips_elf_calculate_relocation): Redirect branches and jumps to
a non-PIC stub if one exists. Check !h->has_static_relocs instead
of !htab->is_vxworks when deciding whether to create dynamic
relocations for R_MIPS_32, R_MIPS_REL32 and R_MIPS_64.
(_bfd_mips_elf_create_dynamic_sections): Unconditionally call
_bfd_elf_create_dynamic_sections. Unconditionally set up
htab->splt and htab->sdynbss. Set htab->srelplt to ".rel.plt"
if !htab->is_vxworks. Add non-VxWorks values of
htab->plt_header_size and htab->plt_entry_size.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
non-branch static relocations. Set has_nonpic_branches when an la25
stub might be required. Set can_make_dynamic_p to TRUE if R_MIPS_32,
R_MIPS_REL32 and R_MIPS_64 relocations can be made dynamic,
rather than duplicating the condition. Do not make them dynamic
for read-only sections in non-PIC executable objects.
Do not protect this code with dynobj == NULL || htab->sgot == NULL;
handle each group of cases separately. Add a default case that
sets has_static_relocs for non-GOT relocations that cannot be
made dynamic. Don't set is_relocation_target and is_branch_target.
Reject non-PIC static relocations in shared objects.
(_bfd_mips_vxworks_adjust_dynamic_symbol): Fold into...
(_bfd_mips_elf_adjust_dynamic_symbol): ...here, using
htab->use_plts_and_copy_relocs instead of htab->is_vxworks
to select PLT and copy-reloc handling. Set the alignment of
.plt and .got.plt when allocating the first entry. Generalize
code to handle REL as well as RELA sections and 64-bit as well as
32-bit GOT entries. Complain if we find a static-only reloc
against an externally-defined symbol and if we cannot create
dynamic relocations for it. Allocate copy relocs using
mips_elf_allocate_dynamic_relocations on non-VxWorks targets.
Set possibly_dynamic_relocs to 0 when using PLTs or copy relocs.
Skip reserved .got.plt entries.
(_bfd_mips_elf_always_size_sections): Use mips_elf_check_symbols
instead of mips_elf_check_mips16_stubs to process each symbol.
Do the traversal for relocatable objects too.
(mips_elf_lay_out_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(_bfd_mips_elf_size_dynamic_sections): Exclude sdynbss if it
is empty. Extend the DT_PLTREL, DT_JMPREL and DT_PLTRELSZ handling
to non-VxWorks targets. Only add DT_REL{,A}, DT_REL{,A}SZ and
DT_REL{,A}ENT if .rel.dyn is nonempty. Create a symbol for the
PLT. Allocate a nop at the end of the PLT. Allocate DT_MIPS_PLTGOT.
(mips_elf_create_la25_stub_info): New function.
(_bfd_mips_elf_finish_dynamic_symbol): Write out PLT entries
and copy relocs where necessary. Check pointer_equality_needed.
(mips_finish_exec_plt): New function.
(_bfd_mips_elf_finish_dynamic_sections): Always set DT_PLTGOT
to the beginning of htab->sgot. Use htab->reserved_gotno instead
of MIPS_RESERVED_GOTNO. Assert htab->use_plts_and_copy_relocs
instead of htab->is_vxworks for DT_PLTREL, DT_PLTRELSZ and DT_JMPREL.
Set DT_PLTREL to DT_REL instead of DT_RELA on non-VxWorks targets.
Use mips_finish_exec_plt to create non-VxWorks PLT headers. Set
DT_MIPS_PLTGOT.
(_bfd_mips_elf_copy_indirect_symbol): Copy has_static_relocs
from the indirect symbol to the direct symbol. Also copy
has_nonpic_branches for indirect symbols.
(_bfd_mips_elf_get_target_dtag): Handle DT_MIPS_PLTGOT and
DT_MIPS_RWPLT.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): Set
use_plts_and_copy_relocs to TRUE. Use TRUE rather than 1
when setting is_vxworks.
(_bfd_mips_elf_use_plts_and_copy_relocs): New function.
(_bfd_mips_elf_final_link): Call mips_elf_create_la25_stub for
each la25_stub.
(_bfd_mips_elf_merge_private_bfd_data): Treat dynamic objects
as PIC. Generalize message about linking PIC and non-PIC.
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): New
functions.
* reloc.c: Update comment near BFD_RELOC_MIPS_JUMP_SLOT.
* bfd-in2.h: Regenerated.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
* readelf.c (get_mips_symbol_other): Handle STO_MIPS_PLT and
STO_MIPS_PIC.
(slurp_rela_relocs, slurp_rel_relocs): Handle MIPS ELF64 here.
(dump_relocations, debug_apply_relocations): Don't handle it here.
(get_mips_dynamic_type): Handle DT_MIPS_PLTGOT and DT_MIPS_RWPLT.
(print_mips_pltgot_entry): New function.
(process_mips_specific): Dump the PLT GOT.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
(OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
(OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
(OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
(md_longopts): Add -call_nonpic.
(md_parse_option): Handle OPTION_CALL_NONPIC.
(md_show_usage): Add -call_nonpic.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/call-nonpic-1.s, gas/mips/call-nonpic-1.d: New test.
* gas/mips/mips.exp: Run it.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
* mips.h (STO_MIPS_PLT, ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT)
(STO_MIPS_PIC, DT_MIPS_PLTGOT, DT_MIPS_RWPLT): New macros.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* emulparams/elf32bmip.sh (GOT): Define, moving .got.plt to...
(OTHER_RELRO_SECTIONS, OTHER_READWRITE_SECTIONS): ...one of these
two variables.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emultempl/mipself.em: Include ldctor.h, elf/mips.h and elfxx-mips.h.
(is_mips_elf): New macro.
(stub_file, stub_bfd): New variables.
(hook_stub_info): New structure.
(hook_in_stub): New function.
(mips_add_stub_section): Likewise.
(mips_create_output_section_statements): Likewise.
(mips_before_allocation): Likewise.
(real_func): New variable.
(mips_for_each_input_file_wrapper): New function.
(mips_lang_for_each_input_file): Likewise.
(lang_for_each_input_file): Define.
(LDEMUL_BEFORE_ALLOCATION): Likewise.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* ld-mips-elf/mips16-pic-3a.s,
ld-mips-elf/mips16-pic-3b.s,
ld-mips-elf/mips16-pic-3.dd,
ld-mips-elf/mips16-pic-3.gd,
ld-mips-elf/mips16-pic-3.rd,
ld-mips-elf/mips16-pic-3.inc,
ld-mips-elf/pic-and-nonpic-1a.s,
ld-mips-elf/pic-and-nonpic-1b.s,
ld-mips-elf/pic-and-nonpic-1.ld,
ld-mips-elf/pic-and-nonpic-1.dd,
ld-mips-elf/pic-and-nonpic-1.nd,
ld-mips-elf/pic-and-nonpic-1-rel.dd,
ld-mips-elf/pic-and-nonpic-1-rel.nd,
ld-mips-elf/pic-and-nonpic-2a.s,
ld-mips-elf/pic-and-nonpic-2b.s,
ld-mips-elf/pic-and-nonpic-2.d,
ld-mips-elf/pic-and-nonpic-3a.s,
ld-mips-elf/pic-and-nonpic-3a.ld,
ld-mips-elf/pic-and-nonpic-3a.dd,
ld-mips-elf/pic-and-nonpic-3a.gd,
ld-mips-elf/pic-and-nonpic-3a.sd,
ld-mips-elf/pic-and-nonpic-3b.s,
ld-mips-elf/pic-and-nonpic-3b.ld,
ld-mips-elf/pic-and-nonpic-3b.ad,
ld-mips-elf/pic-and-nonpic-3b.dd,
ld-mips-elf/pic-and-nonpic-3b.gd,
ld-mips-elf/pic-and-nonpic-3b.nd,
ld-mips-elf/pic-and-nonpic-3b.pd,
ld-mips-elf/pic-and-nonpic-3b.rd,
ld-mips-elf/pic-and-nonpic-3b.sd,
ld-mips-elf/pic-and-nonpic-3-error.d,
ld-mips-elf/pic-and-nonpic-4a.s,
ld-mips-elf/pic-and-nonpic-4b.s,
ld-mips-elf/pic-and-nonpic-4b.ld,
ld-mips-elf/pic-and-nonpic-4b.ad,
ld-mips-elf/pic-and-nonpic-4b.dd,
ld-mips-elf/pic-and-nonpic-4b.gd,
ld-mips-elf/pic-and-nonpic-4b.nd,
ld-mips-elf/pic-and-nonpic-4b.rd,
ld-mips-elf/pic-and-nonpic-4b.sd,
ld-mips-elf/pic-and-nonpic-4-error.d,
ld-mips-elf/pic-and-nonpic-5a.s,
ld-mips-elf/pic-and-nonpic-5b.s,
ld-mips-elf/pic-and-nonpic-5b.ld,
ld-mips-elf/pic-and-nonpic-5b.ad,
ld-mips-elf/pic-and-nonpic-5b.dd,
ld-mips-elf/pic-and-nonpic-5b.gd,
ld-mips-elf/pic-and-nonpic-5b.nd,
ld-mips-elf/pic-and-nonpic-5b.rd,
ld-mips-elf/pic-and-nonpic-5b.sd,
ld-mips-elf/pic-and-nonpic-5b.pd,
ld-mips-elf/pic-and-nonpic-6.ld,
ld-mips-elf/pic-and-nonpic-6-o32a.s,
ld-mips-elf/pic-and-nonpic-6-o32b.s,
ld-mips-elf/pic-and-nonpic-6-o32c.s,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.pd,
ld-mips-elf/pic-and-nonpic-6-o32.rd,
ld-mips-elf/pic-and-nonpic-6-o32.sd,
ld-mips-elf/pic-and-nonpic-6-n32a.s,
ld-mips-elf/pic-and-nonpic-6-n32b.s,
ld-mips-elf/pic-and-nonpic-6-n32c.s,
ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.pd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n32.sd,
ld-mips-elf/pic-and-nonpic-6-n64a.s,
ld-mips-elf/pic-and-nonpic-6-n64b.s,
ld-mips-elf/pic-and-nonpic-6-n64c.s,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.pd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-n64.sd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* elf32-mips.c (elf_backend_hide_symbol): Delete.
* elfn32-mips.c (elf_backend_hide_symbol): Likewise.
* elf64-mips.c (elf_backend_hide_symbol): Likewise.
* elfxx-mips.h (elf_backend_hide_symbol): Likewise.
* elfxx-mips.c (mips_elf_link_hash_entry): Remove "forced_local"
and add "needs_lazy_stub".
(mips_elf_link_hash_newfunc): Update accordingly.
(mips_elf_link_hash_table): Remove "computed_got_sizes" and
add "lazy_stub_count".
(_bfd_mips_elf_link_hash_table_create): Update accordingly.
(mips_elf_output_extsym): Use hd->needs_lazy_stub to detect
cases where a lazy stub is being used.
(mips_elf_sort_hash_table_f): Use h->root.forced_local instead
of h->forced_local.
(mips_elf_record_global_got_symbol): Use _bfd_elf_link_hash_hide_symbol
instead of _bfd_mips_elf_hide_symbol. Do not increment local_gotno
here.
(mips_elf_allocate_dynamic_relocations): Move before new first use.
(mips_elf_check_recreate_got, mips_elf_recreate_got): New functions.
(mips_elf_resolve_final_got_entries): Move earlier in file. Make at
most two passes over the hash table. Use mips_elf_check_recreate_got
to see if there are any indirect or warning entries and
mips_elf_recreate_got to create a new GOT without them.
Return a boolean success value.
(mips_elf_count_forced_local_got_entries): New function.
(mips_elf_make_got_per_bfd): Check h->root.forced_local instead of
h->forced_local.
(mips_elf_set_global_got_offset): Likewise.
(mips_elf_set_no_stub): Replace with...
(mips_elf_forbid_lazy_stubs): ...this new function.
(mips_elf_resolve_final_got_entry): Delete.
(mips_elf_multi_got): Fix formatting. Use mips_elf_forbid_lazy_stubs
instead of mips_elf_set_no_stub. Move the code that sets
global offsets and allocates dynamic relocations from the main
_bfd_mips_elf_size_dynamic_sections loop to here.
(_bfd_mips_elf_adjust_dynamic_symbol): Do not allocate room in
.MIPS.stubs here; just set hmips->needs_lazy_stub and increment
htab->lazy_stub_count.
(_bfd_mips_elf_always_size_sections): Move the stub-estimation
code to mips_elf_estimate_stub_size and the GOT-sizing code to
mips_elf_lay_out_got. Do not call these functions here.
(mips_elf_estimate_stub_size): New function, split
out from _bfd_mips_elf_always_size_sections. Call
mips_elf_resolve_final_got_entries earlier. Count the number
of forced-local entries. Do not add stub sizes to loadable_size;
after this patch, the stub sizes are already included in the main
estimate. Allocate dynamic relocations here rather than in the
main _bfd_mips_elf_size_dynamic_sections loop.
(mips_elf_estimate_stub_size): New function, split out from
_bfd_mips_elf_always_size_sections.
(mips_elf_allocate_lazy_stub): New function.
(mips_elf_lay_out_lazy_stubs): Likewise.
(_bfd_mips_elf_size_dynamic_sections): Call mips_elf_estimate_stub_size,
mips_elf_lay_out_got and mips_elf_lay_out_lazy_stubs. Do not handle
the allocation of sreldyn specially.
(_bfd_mips_elf_hide_symbol): Delete.
ld/testsuite/
* ld-mips-elf/tlsdyn-o32-2.got, ld-mips-elf/tlsdyn-o32-3.got,
ld-mips-elf/tlsdyn-o32-2.d, ld-mips-elf/tlsdyn-o32-3.d: Change the
GOT layout as follows:
BEFORE AFTER
+0x08 %call16(__tls_get_addr) %call16(__tls_get_addr)
+0x0c %tlsldm(tlsbin_ld) %gottprel(tlsvar_ie)
+0x10 " " %tlsgd(tlsvar_gd)
+0x14 %tlsgd(tlsvar_gd) " "
+0x18 " " %tlsgd(tlsbin_gd)
+0x1c %gottprel(tlsvar_ie) " "
+0x20 %tlsgd(tlsbin_gd) %tlsldm(tlsbin_ld)
+0x24 " " " "
+0x28 %gottprel(tlsbin_ie) %gottprel(tlsbin_ie)
* bfd-in.h (bfd_arm_vfp11_fix): New enum. Specify how VFP11
instruction scanning should be done.
(bfd_elf32_arm_init_maps, bfd_elf32_arm_vfp11_erratum_scan)
(bfd_elf32_arm_vfp11_fix_veneer_locations): Add prototypes.
(bfd_elf32_arm_set_target_relocs): Add vfp11 fix type argument to
prototype.
* elf-bfd.h (elf_backend_write_section): Add struct bfd_link_info
argument.
* elf32-arm.c (VFP11_ERRATUM_VENEER_SECTION_NAME)
(VFP11_ERRATUM_VENEER_ENTRY_NAME): Define macros.
(elf32_vfp11_erratum_type): New enum.
(elf32_vfp11_erratum_list): New struct. List of veneers or jumps to
veneers.
(_arm_elf_section_data): Add mapsize, erratumcount, erratumlist.
(elf32_arm_link_hash_table): Add vfp11_erratum_glue_size,
vfp11_fix and num_vfp11_fixes fields.
(elf32_arm_link_hash_table_create): Initialise vfp11_fix,
vfp11_erratum_glue_size, num_vfp11_fixes fields.
(VFP11_ERRATUM_VENEER_SIZE): Define. Size of an (ARM) veneer.
(bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
glue section.
(elf32_arm_section_map_add): Add an code/data mapping symbol entry
to a section's map.
(record_vfp11_erratum_veneer): Create a single veneer, and its
associated symbols.
(bfd_elf32_arm_add_glue_sections_to_bfd): Add vfp11 erratum glue.
(bfd_elf32_arm_init_maps): Initialise mapping symbol table for input
BFDs.
(bfd_elf32_arm_set_vfp11_fix): Set the type of erratum workaround
required.
(bfd_arm_vfp11_pipe): Define VFP11 instruction pipes.
(bfd_arm_vfp11_regno): Recode a register number from a VFP11 insn.
(bfd_arm_vfp11_write_mask): Update write mask according to coded
register number.
(bfd_arm_vfp11_antidependency): New function.
(bfd_arm_vfp11_insn_decode): Decode a VFP11 insn.
(elf32_arm_compare_mapping): Declare.
(bfd_elf32_arm_vfp11_erratum_scan): Scan the sections of an input
BFD for potential erratum-triggering insns. Record results.
(bfd_elf32_arm_vfp11_fix_veneer_locations): Find out where veneers
and branches to veneers have been placed in virtual memory after
layout.
(bfd_elf32_arm_set_target_relocs): Set vfp11_fix field in global
hash table.
(elf32_arm_output_symbol_hook): Remove.
(elf32_arm_write_section): Output veneers, and branches to veneers.
Use maps from input sections, not output sections, for code
byte-swapping.
* elf32-ppc.c (ppc_elf_write_section): Add dummy link_info argument.
* elf32-score.c (_bfd_score_elf_write_section): Likewise.
* elfxx-mips.c (_bfd_mips_elf_write_section): Likewise.
* elfxx-mips.h (_bfd_mips_elf_write_section): Likewise.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* elf-bfd.h (struct elf_backend_data): New field 'elf_backend_ignore_undef_symbol'.
* elfxx-target.h (elf_backend_ignore_undef_symbol): Define to NULL if not
already defined.
(elfNN_bed): Initialise the elf_backend_ignore_undef_symbol field.
* elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): New function.
* elfxx-mips.h (elf_backend_ignore_undef_symbol): Define and prototype.
* elflink.c (elf_link_output_extsym): Check elf_backend_ignore_undef_symbol
before reporting an undefined symbol in a shared library.
* readelf.c (get_mips_symbol_other): New function.
(get_symbol_other): New function.
(process_symbol_table): Call get_symbol_other() to get a description of the
st_other field if it contains more information than just the visibility.
* elfxx-mips.c (mips_elf_calculate_relocation): Ignore an undefined symbol if
it is optional.
(_bfd_mips_elf_merge_symbol_attribute): Make sure that the optional flag is
merged as well as the visibility.
* elfxx-mips.h (_bfd_mips_elf_merge_symbol_attribute): Prototype.
(elf_backend_merge_symbol_attribute): Define.
* mips.h (STO_OPTIONAL): Define.
(ELF_MIPS_IS_OPTIONAL): Define.
2005-05-23 Fred Fish <fnf@specifixinc.com>
* dwarf2.c (struct dwarf2_debug): Add inliner_chain member.
(struct funcinfo): Add caller_func, caller_file, caller_line.
tag, and nesting_level members.
(lookup_address_in_function_table): Change first passed parameter
from "struct funcinfo *" to "struct comp_unit *".
(lookup_address_in_function_table): Dereference unit to find function
table.
(lookup_address_in_function_table): Traverse the function list to
create a chain of inlined functions back to the first non inlined
function.
(scan_unit_for_functions): Remember tag and nesting level. Handle
DW_AT_call_file and DW_AT_call_line.
(comp_unit_find_nearest_line): Adjust lookup_address_in_function_table
call to pass unit pointer instead of function table pointer. For
inlined functions, save pointer to the inliner chain.
(_bfd_dwarf2_find_nearest_line): Initialize inliner_chain to NULL.
(_bfd_dwarf2_find_inliner_info): New function that returns information
from the inliner chain after a call to bfd_find_nearest_line.
* bfd.c (bfd_find_inliner_info): Define using BFD_SEND.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Add entry for
NAME##_find_inliner_info.
(bfd_target): Add _bfd_find_inliner_info.
* bfd-in2.h: Regenerate.
* libbfd-in.h (_bfd_nosymbols_find_inliner_info): Define as
macro that always returns bfd_false.
(_bfd_dwarf2_find_inliner_info): Declare.
* libbfd.h: Regenerate.
* elf32-arm.c (elf32_arm_find_inliner_info): New function
that calls _bfd_dwarf2_find_inliner_info.
(bfd_elf32_find_inliner_info): Define to elf32_arm_find_inliner_info.
* elfxx-mips.c (_bfd_mips_elf_find_inliner_info): New function
that calls _bfd_dwarf2_find_inliner_info.
* elfxx-mips.h (_bfd_mips_elf_find_inliner_info): Declare.
* elfn32-mips.c (bfd_elf32_find_inliner_info): Define to
_bfd_mips_elf_find_inliner_info.
* elf64-mips.c (bfd_elf64_find_inliner_info): Ditto.
* elf32-mips.c (bfd_elf32_find_inliner_info): Ditto.
* elf.c (_bfd_elf_find_inliner_info): New function that calls
_bfd_dwarf2_find_inliner_info.
* elf-bfd.h (_bfd_elf_find_inliner_info): Declare.
* elfxx-target.h (bfd_elfNN_find_inliner_info): Define to
_bfd_elf_find_inliner_info.
* coffgen.c (coff_find_inliner_info): New function that
calls _bfd_dwarf2_find_inliner_info.
* libcoff-in.h (coff_find_inliner_info): Declare.
* libcoff.h: Regenerate.
* coff-rs6000.c (rs6000coff_vec): Add coff_find_inliner_info.
(pmac_xcoff_vec) Ditto.
* coff64-rs6000.c (rs6000coff64_vec): Ditto.
(aix5coff64_vec): Ditto.
* aout-target.h (MY_find_inliner_info): Define as
_bfd_nosymbols_find_inliner_info.
* aout-tic30.c (MY_find_inliner_info): Ditto.
* binary.c (binary_find_inliner_info): Ditto.
* i386msdos.c (msdos_find_inliner_info): Ditto.
* ihex.c (ihex_find_inliner_info): Ditto.
* libaout.h (aout_32_find_inliner_info): Ditto.
* libecoff.h (_bfd_ecoff_find_inliner_info): Ditto.
* mach-o.c (bfd_mach_o_find_inliner_info): Ditto.
* mmo.c (mmo_find_inliner_info): Ditto.
* nlm-target.h (nlm_find_inliner_info): Ditto.
* pef.c (bfd_pef_find_inliner_info): Ditto.
* ppcboot.c (ppcboot_find_inliner_info): Ditto.
* srec.c (srec_find_inliner_info): Ditto.
* tekhex.c (tekhex_find_inliner_info): Ditto.
* versados.c (versados_find_inliner_info): Ditto.
* xsym.c (bfd_sym_find_inliner_info): Ditto.
* ieee.c (ieee_find_inliner_info): New function that always
returns FALSE.
* oasys.c (oasys_find_inliner_info): Ditto.
* vms.c (vms_find_inliner_info): Ditto.
* elf-bfd.h (elf_backend_data): Add int to
elf_backend_section_from_shdr.
(bfd_elf_section_data): Update comment for this_idx.
(_bfd_elf_make_section_from_shdr): Add int.
* elfxx-mips.h (_bfd_mips_elf_section_from_shdr): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Take section index
and use it to set this_idx in bfd_elf_section_data.
(bfd_section_from_shdr): Pass shindex to
_bfd_elf_make_section_from_shdr.
(_bfd_elf_section_from_bfd_section): Use this_idx in
bfd_elf_section_data to find section index.
* elf32-arm.c (elf32_arm_section_from_shdr): Take section
index and pass it to _bfd_elf_make_section_from_shdr.
* elf32-i370.c(i370_elf_section_from_shdr): Likewise.
* elf32-ppc.c (ppc_elf_section_from_shdr): Likewise.
* elf32-sh64.c (sh64_backend_section_from_shdr): Likewise.
* elf32-v850.c (v850_elf_section_from_shdr): Likewise.
* elf64-alpha.c (elf64_alpha_section_from_shdr): Likewise.
* elf64-hppa.c (elf64_hppa_section_from_shdr): Likewise.
* elf64-x86-64.c (elf64_x86_64_section_from_shdr): Likewise.
* elfxx-ia64.c (elfNN_ia64_section_from_shdr): Likewise.
* elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Likewise.