In C++, this:
try
{
break;
}
catch (..)
{}
is invalid. However, because our TRY/CATCH macros support it in C,
the C++ version of those macros support it too. To catch such
assumptions, this adds a (disabled) hack that maps TRY/CATCH to raw
C++ try/catch. Then it goes through all instances that building on
x86_64 GNU/Linux trips on, fixing them.
This isn't strictly necessary yet, but I think it's nicer to try to
keep the tree in a state where it's easier to eliminate the TRY/CATCH
macros.
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Don't
assume that "break" breaks out of a TRY/CATCH.
* python/py-framefilter.c (py_print_single_arg): Don't assume
"continue" breaks out of a TRY/CATCH.
* python/py-value.c (valpy_binop_throw): New function, factored
out from ...
(valpy_binop): ... this.
(valpy_richcompare_throw): New function, factored
out from ...
(valpy_richcompare): ... this.
* solib.c (solib_read_symbols): Don't assume "break" breaks out
of a TRY/CATCH.
* common/common-exceptions.h [USE_RAW_CXX_TRY]
<TRY/CATCH/END_CATCH>: Define as 1-1 wrappers around try/catch.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
on Fedora Rawhide (==22) i686 using --with-python=/usr/bin/python3 one gets:
./python/py-value.c:1696:3: error: initialization from incompatible pointer type [-Werror]
valpy_hash, /*tp_hash*/
^
./python/py-value.c:1696:3: error: (near initialization for ‘value_object_type.tp_hash’) [-Werror]
cc1: all warnings being treated as errors
Makefile:2628: recipe for target 'py-value.o' failed
This is because in Python 2 tp_hash was:
typedef long (*hashfunc)(PyObject *);
while in Python 3 tp_hash is:
typedef Py_hash_t (*hashfunc)(PyObject *);
Py_hash_t is int for 32-bit hosts and long for 64-bit hosts. While on 32-bit
hosts sizeof(long)==sizeof(int) still the hashfunc type is formally
incompatible. As this patch should have no compiled code change it is not
really necessary for gdb-7.9, it would fix there just this non-fatal
compilation warning:
./python/py-value.c:1696:3: warning: initialization from incompatible pointer type
valpy_hash, /*tp_hash*/
^
./python/py-value.c:1696:3: warning: (near initialization for ‘value_object_type.tp_hash’)
gdb/ChangeLog
2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/python-internal.h (Py_hash_t): Define it for Python <3.2.
* python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
return type.
This is done to avoid errors when compiled with -Werror against Python-2.4
which did not have the const qualifier for the second argument of these
functions.
gdb/
* python/python-internal.h (gdb_PyObject_GetAttrString)
(gdb_PyObject_HasAttrString): New inline function definitions.
* py-value.c (get_field_flag): Remove the now unnecessary cast to
char * of the second argument to PyObject_GetAttrString.
gdb.Value.dynamic_type is supposed to work for reference and pointer
values. However, the value object in the function 'valpy_get_dynamic_type'
was being dereferenced using 'value_ind' irrespective of the value type
being TYPE_CODE_PTR or TYPE_CODE_REF. This patch fixes that to use
'coerce_ref' for TYPE_CODE_REF values.
ChangeLog:
* python/py-value.c (valpy_get_dynamic_type): Use coerce_ref to
dereference TYPE_CODE_REF values.
testsuite/
* gdb.python/py-value.c: Improve test case.
* gdb.python/py-value.exp: Add new test.
This fixes a build failure against Python 2.4 by casting away "const"
on the second argument to PyObject_GetAttrString. Similar casts to
support Python 2.4 were already present in a number of other places.
gdb/
2014-03-16 Ulrich Weigand <uweigand@de.ibm.com>
* python/py-value.c (get_field_flag): Cast flag_name argument to
PyObject_GetAttrString to support Python 2.4.
* NEWS: Add entry for the new feature
* python/py-value.c (valpy_binop): Call value_x_binop for struct
and class values.
testsuite/
* gdb.python/py-value-cc.cc: Improve test case to enable testing
operations on gdb.Value objects.
* gdb.python/py-value-cc.exp: Add new test to test operations on
gdb.Value objects.
doc/
* python.texi (Values From Inferior): Add description about the
new feature.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
PR python/15464
PR python/16113
* valops.c (value_struct_elt_bitpos): New function
* py-type.c (convert_field): Set 'name' attribute of a gdb.Field
object to 'None' if the field name is an empty string ("").
* python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
attribute to look for a field when 'name' is 'None'.
(get_field_type): New function
testsuite/
* gdb.python/py-type.c: Enhance test case.
* gdb.python/py-value-cc.cc: Likewise
* gdb.python/py-type.exp: Add new tests.
* gdb.python/py-value-cc.exp: Likewise
PR python/16113
* NEWS (Python Scripting): Add entry for the new feature and the
new attribute of gdb.Field objects.
* python/py-type.c (gdbpy_is_field): New function
(convert_field): Add 'parent_type' attribute to gdb.Field
objects.
* python/py-value.c (valpy_getitem): Allow subscript value to be
a gdb.Field object.
(value_has_field): New function
(get_field_flag): New function
* python/python-internal.h (gdbpy_is_field): Add declaration.
testsuite/
* gdb.python/py-value-cc.cc: Improve test case.
* gdb.python/py-value-cc.exp: Add new tests to test usage of
gdb.Field objects as subscripts on gdb.Value objects.
doc/
* gdb.texinfo (Values From Inferior): Add a note about using
gdb.Field objects as subscripts on gdb.Value objects.
(Types In Python): Add description about the new attribute
"parent_type" of gdb.Field objects.
is_intlike was mostly duplicating is_integral_type, with the exception
of the handling of TYPE_CODE_PTR when parameter PTR_OK is nonzero.
This patches deletes the is_intlike function, using is_integral_type
instead, and adjusting the two locations where this function gets
called.
The code should remain strictly equivalent.
gdb/ChangeLog:
* python/py-value.c (is_intlike): Delete.
(valpy_int): Replace use of CHECK_TYPEDEF and is_intlike
by use of is_integral_type.
(valpy_long): Replace use of CHECK_TYPEDEF and is_intlike
by use of is_integral_type and check for TYPE_CODE_PTR.
Consider the following variable:
type Small is range -128 .. 127;
SR : Small := 48;
Trying to get its value as an integer within Python code yields:
(gdb) python sr = gdb.parse_and_eval('sr')
(gdb) python print int(sr)
Traceback (most recent call last):
File "<string>", line 1, in <module>
gdb.error: Cannot convert value to int.
Error while executing Python code.
This is happening because our variable is a range type, and
py-value's is_intlike does not handle TYPE_CODE_RANGE. This
patch fixes this.
gdb/ChangeLog:
* python/py-value.c (is_intlike): Add TYPE_CODE_RANGE handling.
gdb/testsuite/ChangeLog:
* gdb.ada/py_range: New testcase.
* python/py-value.c (convert_value_from_python): Move PyInt_Check
conversion logic to occur after PyLong_Check. Comment on order
change significance.
* python/py-arch.c (archpy_disassemble): Comment on order of
conversion for integers and longs.
Some code in py-value.c could exit a loop without running some
cleanups made in the loop.
* python/py-value.c (valpy_binop): Call do_cleanups before
exiting loop.
This fixes -Wpointer-sign warnings in the python/ code in the manner
that seems most appropriate to me.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
* python/py-prettyprint.c (print_string_repr): Change type of
'output' local to char *. Add cast to gdb_byte * in
LA_PRINT_STRING call.
(print_children): Change type of 'output' local to char *.
* python/py-value.c (valpy_string): Add cast to const char * in
PyUnicode_Decode call.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* NEWS: Mention Python 3 support.
* varobj.c (value_get_print_value): Use
python_string_to_target_string.
* python/py-block.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
* python/py-breakpoint.c: Ditto.
* python/py-cmd.c: Ditto.
* python/py-event.c: Ditto.
* python/py-event.h: Ditto.
* python/py-evtregistry.c: Ditto.
* python/py-finishbreakpoint.c: Ditto.
* python/py-frame.c: Ditto.
* python/py-function.c: Ditto.
* python/py-infthread.c: Ditto.
* python/py-lazy-string.c: Ditto.
* python/py-progspace.c: Ditto.
* /python/py-symbol.c: Ditto.
* python/py-evts.c: (gdbpy_initialize_py_events): Add module
initialization for Python 3.
* python/py-inferior.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(infpy_read_memory): Return memoryview object if Python 3.
(infpy_write_memory): Use "s*" operand parsing code for Python 3.
(infpy_search_memory): Ditto.
(get_buffer): New function for Python 3.
* python/py-objfile.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(objfpy_dealloc): Use Py_TYPE to call tp_free.
* python/py-param.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(get_attr): Use PyUnicode_CompareWithASCIIString if Python 3.
(set_attr): Ditto.
* python/py-prettyprint.c (print_string_repr): use PyBytes methods
instead of PyString methods if Python 3.
(print_children): Skip push_dummy_python_frame call if Python 3.
* python/py-symtab.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(salpy_dealloc): Use Py_TYPE to call tp_free.
* python/py-type.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(field_dealloc): Use Py_TYPE to call tp_free.
(typy_dealloc): Ditto.
(type_object_as_number): Adjust struct initializations for
differences in layout for Python 2 vs. Python 3.
* python/py-utils.c (python_string_to_unicode): Omit non-Unicode
string case for Python 3.
(unicode_to_encoded_python_string): Shorten code (no functional
change).
(python_string_to_target_python_string): Comment that in Python 3
returned value is a Python "bytes" type.
(gdbpy_is_string): Omit non-Unicode string check in Python 3.
(gdb_py_object_from_longest): Omit non-long integer case in Python
3.
(gdb_py_object_from_ulongest): Ditto.
* python/py-value.c: Use PyVarObject_HEAD_INIT in initialization
of type objects.
(valpy_dealloc): Use Py_TYPE to call tp_free.
(valpy_int): Omit function if Python 3.
(convert_value_from_python): Use "%S" format (Python object as a
string) if Python 3.
(value_object_as_number): Adjust struct initializations for
differences in layout for Python 2 vs. Python 3.
* python/python-config.py: Adjust syntax for Python 3
compatibility.
Include "sys.abiflags" string as part of python library name, if
that attribute exists (Python 3).
* python/python-internal.h (IS_PY3): Define if Python 3.
(Py_TPFLAGS_HAVE_ITER, Py_TPFLAGS_CHECKTYPES): Define with
placeholder value if Python 3.
(PyInt_Check, PyInt_FromLong, PyInt_AsLong, PyString_FromString,
PyString_Decode, PyString_FromFormat, PyString_Check): Define as
analogous Python 3 API function if Python 3.
(PyVarObject_HEAD_INIT): Define if not already defined.
(Py_TYPE): Ditto.
* python/python.c (eval_python_command): Omit Py_FlushLine call if
Python 3.
Check return values of all Python API calls for error.
Supply dummy "python" and "python-interactive" commands if Python
initialization failed.
(_initialize_python): Convert argc to wchar_t** if Python 3.
Add module initialization for Python 3.
(finish_python_initialization): Pass wchar_t * argument to
PySys_SetPath if Python 3.
* python/lib/gdb/__init__.py: Define "reload" if Python 3.
(_GdbFile): New class for common output file behavior.
(GdbOutFile): Subclass from _GdbFile.
(GdbOutputErrorFile): Ditto.
(auto_load_packages): Adjust syntax for Python 3 compatibility.
* python/lib/gdb/printing.py: Define basestr and int if Python 3.
* python/lib/gdb/prompt.py: Use sorted() function rather than
sort() method.
* python/lib/gdb/command/explore.py: Define raw_input if Python 3.
Adjust syntax for Python 3 compatibility.
* python/lib/gdb/command/pretty_printers.py: Use sorted() function
rather than sort() method.
Adjust syntax for Python 3 compatibility.
* python/lib/gdb/command/type_printers.py: Ditto.
* doc/gdb.texinfo (Inferior.read_memory): Mention that the return
value is a memoryview object if Python 3.
Python scripting: Add new method Value.referenced_value to
gdb.Value which can dereference pointer as well as reference
values.
* NEWS: Add entry under 'Python scripting' about the new method
Value.referenced_value on gdb.Value objects.
* python/py-value.c (valpy_referenced_value): New function
defining a new method on gdb.Value objects which can dereference
pointer and reference values.
* testsuite/gdb.python/py-value.cc: Add test case for
testing the methodology exposing C++ values to Python.
* testsuite/gdb.python/py-value-cc.exp: Add tests testing the
methodology exposing C++ values to Python.
* testsuite/gdb.python/Makefile.in: Add py-value-cc to
EXECUTABLES.
* docs/gdb.texinfo (Python API/Values From Inferior): Add
description about the new method Value.referenced_value. Add
description on how Value.dereference is different (and similar)
to Value.referenced_value.
* python/py-breakpoint.c: Include python.h.
* python/py-continueevent.c (create_continue_event_object): Make
static.
* python/py-lazy-string.c (stpy_get_type): Make static.
* python/py-newobjfileevent.c (create_new_objfile_event_object):
Make static.
* python/py-utils.c (unicode_to_target_python_string): Make
static.
* python/py-value.c: Include python.h.
* python/py-value.c (value_to_value_object): Remove fetching of
the value if it was lazy.
(valpy_get_is_lazy): New function.
(valpy_fetch_lazy): New function.
Joel Brobecker
Pedro Alves
Simon Marchi
Siva Chandra
Jan Kratochvil
Doug Evans
Gary Benson
Ulrich Weigand
Phil Muldoon
Tom Tromey
Joel Brobecker
Paul Koning
Siva Chandra Reddy
Doug Evans
Pierre Muller
Michael Snyder