As all tests that check gdb,noinferiorio have been adjusted to expect
inferior output with "-i $inferior_spawn_id", we can remove this now,
and thus enable those tests against gdbserver.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp: Don't set gdb,noinferiorio.
This commit is to add comments on using this board file and the
requirements on localhost.
gdb/testsuite:
2015-06-22 Yao Qi <yao.qi@linaro.org>
* boards/remote-gdbserver-on-localhost.exp: Add comments.
This patch is to add a new board file that does real remote gdbserver
testing on localhost. This board file can be used to reproduce PR 18208.
gdb/testsuite
2015-04-24 Yao Qi <yao.qi@linaro.org>
* boards/remote-gdbserver-on-localhost.exp: New file.
Fixes:
-FAIL: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint created
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint on marker is installed
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
These tests do something like this:
#0 - start gdb/gdbserver normally
#1 - setup some things in the debug session
#2 - disconnect from gdbserver
#3 - restart gdb
#4 - reconnect to gdbserver
The problem is that the native-extended-gdbserver board always spawns
a new gdbserver instance in #3 (and has gdb connect to that). So when
the test gets to #4, it connects to that new instance instead of the
old one:
(gdb) spawn ../gdbserver/gdbserver --multi :2354
Listening on port 2354
target extended-remote localhost:2354
Remote debugging using localhost:2354
...
spawn ../gdbserver/gdbserver --multi :2355
Listening on port 2355
47-target-select extended-remote localhost:2355
=tsv-created,name="trace_timestamp",initial="0"\n
47^connected
(gdb)
...
47-target-select extended-remote localhost:2355
47^connected
(gdb)
FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
testsuite/ChangeLog:
2015-04-16 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start
a new gdbserver if gdbserver_reconnect_p is set.
Running the testsuite with the native-extended-gdbserver.exp board and
passing a variant spec, like
make check RUNTESTFLAGS="--target_board=native-extended-gdbserver/-m32"
results in dejagnu trying to open a rsh connection to
"native-extended-gdbserver", which of course is wrong. The point of
this board is running things locally.
The issue is that the native-extended-gdbserver board does not clear
the "isremote" flag properly.
Reported by Sergio at:
https://sourceware.org/ml/gdb-patches/2015-02/msg00067.html
testsuite/
2015-02-04 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp: Remove any target variant
specifications from the board name before clearing the isremote
flag from board_info.
In the recent review to my patch about copying files to remote host,
we find that we need a board file which is more closely mapped real
remote host testing to improve coverage. With the board file
local-remote-host-native.exp, DejaGNU copies files to
$build/gdb/testsuite/remote-host to emulate the effect of remote host.
Is it OK?
gdb/testsuite:
2014-09-16 Yao Qi <yao@codesourcery.com>
* boards/local-remote-host-native.exp: New file.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
After I run test like this,
$ make check RUNTESTFLAGS='--host_board=local-remote-host dw2-basic.exp'
gdb.dwarf2/file1.txt in source tree was removed. In some gdb.dwarf2/*.exp,
file1.txt is copied to host and then removed at the end. However, in
local-remote-host-notty.exp, ${board}_download doesn't copy the file but
return the absolute path of the src file. 'remote_file host delete' at
the end will remove the file in source tree.
This patch is to overwrite ${board}_file, and specially make "delete"
option do nothing. This approach is used in gdbserver-base.exp and
remote-stdio-gdbserver.exp too.
gdb/testsuite:
2014-05-14 Yao Qi <yao@codesourcery.com>
* boards/local-remote-host-notty.exp (${board}_file): New
proc.
In a test I was writting, I needed a procedure that would connect to
the target, and do "load", or equivalent.
Years ago, boards would override gdb_load to implement that. Then
gdb_reload was added, and gdb_load was relaxed to allow boards avoid
the spawing and connecting to the target. This sped up gdbserver
testing. See
https://www.sourceware.org/ml/gdb-patches/2007-02/msg00318.html.
To actually spawn the target and load the executable on the target
side, gdb_reload was born:
# gdb_reload -- load a file into the target. Called before "running",
# either the first time or after already starting the program once,
# for remote targets. Most files that override gdb_load should now
# override this instead.
proc gdb_reload { } {
# For the benefit of existing configurations, default to gdb_load.
# Specifying no file defaults to the executable currently being
# debugged.
return [gdb_load ""]
}
Note the comment about specifying no file. Indeed looking at
config/sid.exp, or config/monitor.exp, we see examples of that.
However, the default gdb_load itself doesn't handle the case of no
file specified. When passed no file, it just calls gdb_file_cmd with
no file either, which ends up invocing the "file" command with no
argument, which means unloading the file and its symbols... That
means calling gdb_reload when testing against native targets is
broken. We don't see that today because the only call to gdb_reload
that exists today is guarded by target_info exists
gdb,do_reload_on_run.
The native-extended-gdbserver.exp board is likewise broken here. When
[gdb_load ""] is called, the board sets the remote exec-file to "" ...
Tested on x86_64 Fedora 17, native, remote gdbserver and
extended-remote gdbserver.
testsuite/
2014-05-01 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_load): Extend comment. Skip calling
gdb_file_cmd if no file is specified.
* boards/native-extended-gdbserver.exp (gdb_load): Use the
last_loaded_file to set the remote exec-file.
This adds a variant of local-remote-host-notty.exp that forces
pseudo-tty allocation, so that readline/editing is enabled.
$ ssh localhost gdb -q
(gdb) show editing
Editing of command lines as they are typed is off.
(gdb)
vs:
$ ssh -t localhost gdb -q
(gdb) show editing
Editing of command lines as they are typed is on.
We now get, e.g.:
Running ../../../src/gdb/testsuite/gdb.base/filesym.exp ...
PASS: gdb.base/filesym.exp: complete on "filesy"
PASS: gdb.base/filesym.exp: completion list for "filesym"
PASS: gdb.base/filesym.exp: set breakpoint at filesym
gdb/testsuite/
2014-05-01 Pedro Alves <palves@redhat.com>
* boards/local-remote-host.exp: New file.
When testing with this board, stdin is not a tty, and so
readline/editing is disabled:
$ ssh localhost gdb -q
(gdb) show editing
Editing of command lines as they are typed is off.
(gdb)
Rename the file, to make room for a version of this board that forces a pseudo-tty.
gdb/testsuite/
2014-05-01 Pedro Alves <palves@redhat.com>
* boards/local-remote-host.exp: Rename to ...
* boards/local-remote-host-notty.exp: ... this.
* lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
Add comment.
(gdbserver_default_get_comm_port): New function.
(gdbserver_start): Check if board file provided
"gdbserver,get_comm_port" and use it if so.
* boards/native-stdio-gdbserver.exp (sockethost): Set to "".
(gdb,socketport): Set to "stdio".
(gdbserver,get_comm_port): Set to ${board}_get_comm_port.
(stdio_gdbserver_template): Delete.
(${board}_get_remote_address): Update.
(${board}_build_remote_cmd): Delete.
(${board}_get_comm_port): New function.
(${board}_spawn): Update.
* boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
Delete.
(${board}_get_remote_address): Update.
(${board}_get_comm_port): New function.
Running catch-syscall.exp against a gdbserver that actually supports
it, we get:
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit at catch syscall with unused syscall (mlock) (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
The fail pattern is:
Catchpoint 2 (call to syscall exit_group), 0x000000323d4baa29 in _exit () from /lib64/libc.so.6
(gdb) PASS: gdb.base/catch-syscall.exp: program has called exit_group
delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break exit
Breakpoint 3 at 0x323d438bf0
(gdb) continue
Continuing.
[Inferior 1 (process 21081) exited normally]
That "break exit" + "continue" comes from:
> # gdb_continue_to_end:
> # The case where the target uses stubs has to be handled specially. If a
> # stub is used, we set a breakpoint at exit because we cannot rely on
> # exit() behavior of a remote target.
> #
The native-gdbserver.exp board, used to test against gdbserver in
"target remote" mode, triggers that case ($use_gdb_stub is true). So
gdb_continue_to_end doesn't work for catch-syscall.exp as here we
catch the exit_group and continue from that, expecting to see a real
program exit. I was about to post a patch that changes
catch-syscall.exp to call a new function that just always does what
gdb_continue_to_end does in the !$use_gdb_stub case. But, since
GDBserver doesn't really need this, in the end I thought it better to
teach the testsuite that there are stubs that know how to report
program exits, by adding a new "exit_is_reliable" board variable that
then gdb_continue_to_end checks.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* README (Board Settings): Document "exit_is_reliable".
* lib/gdb.exp (gdb_continue_to_end): Check whether the board says
running to exit reliably reports program exits.
* boards/native-gdbserver.exp: Set exit_is_reliable in the board
info.
* boards/native-stdio-gdbserver.exp: Likewise.
In extended-remote, when GDB connects the target, but target is not
running, the TSVs are not uploaded. When GDB attaches to a process,
the TSVs are not uploaded either. However, GDBserver has some
builtin or predefined TSV to upload, such as $trace_timestamp. This
bug causes $trace_timestamp is never uploaded.
gdb/
2013-06-25 Yao Qi <yao@codesourcery.com>
* remote.c (remote_start_remote): Move code to upload tsv
earlier.
gdb/testsuite/
2013-06-25 Yao Qi <yao@codesourcery.com>
* boards/native-extended-gdbserver.exp: Set board_info
'gdb,predefined_tsv'.
* boards/native-gdbserver.exp: Likewise.
* boards/native-stdio-gdbserver.exp: Likewise.
* gdb.server/ext-attach.exp: Load trace-support.exp. Check
uploaded TSVs if target supports tracing.
* gdb.trace/tsv.exp: Check uploaded TSVs if target supports
tracing and target has predefined tsv.
gdb/doc/
2013-06-25 Yao Qi <yao@codesourcery.com>
* gdbint.texinfo (Testsuite): Document 'gdb,predefined_tsv'.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Joel Brobecker
Pedro Alves
Yao Qi
Doug Evans
Yao Qi
David Blaikie
Doug Evans
Sterling Augustine
Joel Brobecker