90 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Pedro Alves
|
3b12939dfc |
Replace the sync_execution global with a new enum prompt_state tristate
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.
With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target. IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.
Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:
/* If the inferior was in sync execution mode, and now isn't,
restore the prompt (a synchronous execution command has finished,
and we're ready for input). */
if (current_ui->async && was_sync && !sync_execution)
observer_notify_sync_execution_done ();
We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.
This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:
enum prompt_state
{
/* The command line is blocked simulating synchronous execution.
This is used to implement the foreground execution commands
('run', 'continue', etc.). We won't display the prompt and
accept further commands until the execution is actually over. */
PROMPT_BLOCKED,
/* The command finished; display the prompt before returning back to
the top level. */
PROMPT_NEEDED,
/* We've displayed the prompt already, ready for input. */
PROMPTED,
;
I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* annotate.c: Include top.h.
(async_background_execution_p): Delete.
(print_value_flags): Check the UI's prompt state rather then
async_background_execution_p.
* event-loop.c (start_event_loop): Set the prompt state to
PROMPT_NEEDED.
* event-top.c (display_gdb_prompt, async_enable_stdin)
(async_disable_stdin): Check the current UI's prompt state instead
of the sync_execution global.
(command_line_handler): Set the prompt state to PROMPT_NEEDED
before running a command, and display the prompt if still needed
afterwards.
* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
(new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
(call_thread_fsm_should_stop): Set the prompt state to
PROMPT_NEEDED.
(run_inferior_call): Adjust to temporarily set the prompt state to
PROMPT_BLOCKED instead of using the sync_execution global.
(call_function_by_hand_dummy): Pass the current UI to
new_call_thread_fsm.
* infcmd.c: Include top.h.
(continue_1): Check the current UI's prompt state instead of the
sync_execution global.
(continue_command): Validate global execution state before calling
prepare_execution_command.
(step_1): Call all_uis_check_sync_execution_done.
(attach_post_wait): Don't call async_enable_stdin here. Remove
reference to sync_execution.
* infrun.c (sync_execution): Delete global.
(follow_fork_inferior)
(reinstall_readline_callback_handler_cleanup): Check the current
UI's prompt state instead of the sync_execution global.
(check_curr_ui_sync_execution_done)
(all_uis_check_sync_execution_done): New functions.
(fetch_inferior_event): Call all_uis_check_sync_execution_done
instead of trying to determine whether the global sync execution
changed.
(handle_no_resumed): Check the prompt state of all UIs.
(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
UIs. Emit the "Switching to" notification to all UIs. Enable
stdin in all UIs.
* infrun.h (sync_execution): Delete.
(all_uis_check_sync_execution_done): Declare.
* main.c (captured_command_loop): Don't call
interp_pre_command_loop if the prompt is blocked.
(catch_command_errors, catch_command_errors_const): Adjust.
(captured_main): Set the initial prompt state to PROMPT_NEEDED.
* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
PROMPTED.
(mi_interpreter_resume): Don't clear sync_execution. Remove hack
comment.
(mi_execute_command_input_handler): Set the prompt state to
PROMPT_NEEDED before executing the command, and only display the
prompt if the prompt state is PROMPT_NEEDED afterwards.
(mi_on_resume_1): Adjust to check the prompt state.
* target.c (target_terminal_inferior): Adjust to check the prompt
state.
* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
(execute_command): Check the current UI's prompt state instead of
sync_execution.
* top.h (enum prompt_state): New.
(struct ui) <prompt_state>: New field.
(ALL_UIS): New macro.
|
|
|
Pedro Alves
|
7c36c34e4c |
Always run async signal handlers in the main UI
Async signal handlers have no connection to whichever was the current UI, and thus always run on the main one. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * event-loop.c: Include top.h. (invoke_async_signal_handlers): Switch to the main UI. * event-top.c (main_ui_): Update comment. (main_ui): New global. * top.h (main_ui): Declare. |
|
|
Pedro Alves
|
585a46a2d0 |
Eliminate immediate_quit
This finally gets rid of immediate_quit (and surrounding infrustruture), as nothing sets it anymore. gdb_call_async_signal_handler was only necessary in order to handle immediate_quit. We can just call mark_async_signal_handler directly on all hosts now. In turn, we can clean up mingw-hdep.c's gdb_select a bit, as sigint_event / sigint_handler is no longer needed. gdb/ChangeLog: 2016-04-12 Pedro Alves <palves@redhat.com> * defs.h: Update comments on SIGINT handling. (immediate_quit): Delete declaration. * event-loop.c (call_async_signal_handler): Delete. * event-loop.h (call_async_signal_handler): Delete declaration. (mark_async_signal_handler): Update comments. (gdb_call_async_signal_handler): Delete declaration. * event-top.c (handle_sigint): Call mark_async_signal_handler instead of gdb_call_async_signal_handler. * exceptions.c (prepare_to_throw_exception): Remove reference to immediate_quit. (exception_fprintf): Remove comments about immediate_quit. * mingw-hdep.c (sigint_event, sigint_handler): Delete. (gdb_select): Don't wait on sigint_event. (gdb_call_async_signal_handler): Delete. (_initialize_mingw_hdep): Delete. * posix-hdep.c (gdb_call_async_signal_handler): Delete. * utils.c (immediate_quit): Delete. |
|
|
Pedro Alves
|
5cc3ce8b5f |
Fix signal handler/event-loop races
GDB's core signal handling suffers from a classical signal handler /
mainline code race:
int
gdb_do_one_event (void)
{
...
/* First let's see if there are any asynchronous signal handlers
that are ready. These would be the result of invoking any of the
signal handlers. */
if (invoke_async_signal_handlers ())
return 1;
...
/* Block waiting for a new event. (...). */
if (gdb_wait_for_event (1) < 0)
return -1;
...
}
If a signal is delivered while gdb is blocked in the poll/select
inside gdb_wait_for_event, then the select/poll breaks with EINTR,
we'll loop back around and call invoke_async_signal_handlers.
However, if the signal handler runs between
invoke_async_signal_handlers and gdb_wait_for_event,
gdb_wait_for_event will block, until the next unrelated event...
The fix is to a struct serial_event, and register it in the set of
files that select/poll in gdb_wait_for_event waits on. The signal
handlers that defer work to invoke_async_signal_handlers call
mark_async_signal_handler, which is adjusted to also set the new
serial event in addition to setting a flag, and is thus now is
garanteed to immediately unblock the next gdb_select/poll call, up
until invoke_async_signal_handlers is called and the event is cleared.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* event-loop.c: Include "ser-event.h".
(async_signal_handlers_serial_event): New global.
(async_signals_handler, initialize_async_signal_handlers): New
functions.
(mark_async_signal_handler): Set
async_signal_handlers_serial_event.
(invoke_async_signal_handlers): Clear
async_signal_handlers_serial_event.
* event-top.c (async_init_signals): Call
initialize_async_signal_handlers.
|
|
|
Joel Brobecker
|
618f726fcb |
GDB copyright headers update after running GDB's copyright.py script.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
|
Simon Marchi
|
8d7493201c |
Replace some xmalloc-family functions with XNEW-family ones
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise. |
|
|
Pedro Alves
|
abc56d60aa |
remote: allow aborting long operations (e.g., file transfers)
Currently, when remote debugging, if you type Ctrl-C just while the target stopped for an internal event, and GDB is busy doing something that takes a while (e.g., fetching chunks of a shared library off of the target, with vFile, to process ELF headers and debug info), the Ctrl-C is lost. The patch hooks up the QUIT macro to a new target method that lets the target react to the double-Ctrl-C before the event loop is reached, which allows reacting to a double-Ctrl-C even when GDB is busy doing some long operation and not waiting for a stop reply. That end result is: (gdb) c Continuing. ^C ^C Interrupted while waiting for the program. Give up waiting? (y or n) y Quit (gdb) info threads Id Target Id Frame * 1 Thread 11673 0x00007ffff7deb240 in _dl_debug_state () from target:/lib64/ld-linux-x86-64.so.2 (gdb) If, however, GDB is waiting for a stop reply (because the target has been resumed, with e.g., vCont;c), but the target isn't responding, we now get: (gdb) c Continuing. ^C ^C The target is not responding to interrupt requests. Stop debugging it? (y or n) y Disconnected from target. (gdb) info threads No threads. This offers to disconnect, because when we're waiting for a stop reply, there's nothing else we can send the target other than an interrupt request. And if that doesn't work, there's nothing else we can do. The Ctrl-C is presently lost because until we get to a user-visible stop, the SIGINT handler that is installed is the one that forwards the interrupt to the remote side, with the \003 "packet" [1]. But, gdbserver ignores an interrupt request if the program is stopped. Still, even if it didn't, the server can only report back a stop-because-of-SIGINT when the program is next resumed. And it may take a while to actually re-resume the target. [1] - In the old sync days, the remote target would react to a double-Ctrl-C by asking users whether they wanted to give up waiting and disconnect. The code is still there, but it it isn't reacheable on most hosts, which support serial connections in async mode (probably only DJGPP doesn't). Even then, in sync mode, remote.c's SIGINT handler is only installed while the target is resumed, and is removed as soon as the target sends back a stop reply. That means that a Ctrl-C just while GDB is processing an internal event can end up with an odd "Quit" at the prompt instead of "Program stopped by SIGINT". In contrast, in async mode, remote.c's SIGINT handler is set up as long as target_terminal_inferior or target_terminal_ours_for_output are in effect (IOW, until we get a user-visible stop and call target_terminal_ours), so the user shouldn't get back a spurious Quit. However, it's still desirable to be able to interrupt a long-running GDB operation, if GDB takes a while to re-resume the target or get back to the event loop. Tested on x86_64 Fedora 20. gdb/ChangeLog: 2015-08-24 Pedro Alves <palves@redhat.com> * defs.h (maybe_quit): Declare. (QUIT): Now calls maybe_quit. * event-loop.c (clear_async_signal_handler) (async_signal_handler_is_marked): New functions. * event-loop.h (async_signal_handler_is_marked) (clear_async_signal_handler): New declarations. * remote.c (remote_check_pending_interrupt): New function. (interrupt_query): Use make_cleanup_restore_target_terminal. No longer check whether the target is async. If waiting for a stop reply, and a Ctrl-C as been sent to the target, offer to disconnect, and throw TARGET_CLOSE_ERROR instead of a quit. Otherwise do not disconnect and throw a quit. (_initialize_remote): Install remote_check_pending_interrupt as to_check_pending_interrupt. * target.c (target_check_pending_interrupt): New function. * target.h (struct target_ops) <to_check_pending_interrupt>: New field. (target_check_pending_interrupt): New declaration. * utils.c (maybe_quit): New function. * target-delegates.c: Regenerate. |
|
|
Pedro Alves
|
438e1e427e |
Prepare for gnulib update
After the last gnulib import (Dec 2012), gnulib upstream started
replacing mingw's 'struct timeval' with a version with 64-bit time_t,
for POSIX compliance:
commit f8e84098084b3b53bc6943a5542af1f607ffd477
Author: Bruno Haible <bruno@clisp.org>
Date: Sat Jan 28 18:12:10 2012 +0100
sys_time: Override 'struct timeval' on some native Windows platforms.
See:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00372.html
However, that results in conflicts with native Winsock2's 'select':
select()'s argument
http://sourceforge.net/p/mingw-w64/mailman/message/29610438/
... and libiberty's timeval-utils.h timeval_add/timeval_sub, at the
least.
We don't really need the POSIX compliance, so this patch prepares us
to simply not use gnulib's 'struct timeval' replacement once a more
recent gnulib is imported, thus preserving the current behavior, by
adding a sys/time.h wrapper header that undefs gnulib's replacements,
and including that everywhere instead.
The SIZE -> OSIZE change is necessary because newer gnulib's
sys/time.h also includes windows.h/winsock2.h, which defines a
conflicting SIZE symbol.
Cross build-tested mingw-w64 32-bit and 64-bit.
Regtested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
* common/gdb_sys_time.h: New file.
* event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
* gdb_select.h: Likewise.
* gdb_usleep.c: Likewise.
* maint.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.h: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote.c: Likewise.
* ser-base.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* symfile.c: Likewise.
* symfile.c: Likewise. Rename OSIZE to SIZE throughout.
* target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
* utils.c: Likewise.
gdb/gdbserver/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* debug.c: Include gdb_sys_time.h instead of sys/time.h.
* event-loop.c: Likewise.
* remote-utils.c: Likewise.
* tracepoint.c: Likewise.
|
|
|
Pedro Alves
|
4e63d0ac89 |
Fix gdb.mi/mi-nsmoribund.exp timeouts
The PPC64 buildbot has been showing timeouts in mi-nsmoribund.exp,
like this:
(...)
-thread-info
FAIL: gdb.mi/mi-nsmoribund.exp: thread state: all running except the breakpoint thread (timeout)
... and I can reproduce this on gcc110 (PPC64) on the gcc compile
farm.
That is, the test sends "-thread-info" to GDB, but GDB never replies
back.
The problem is that these machines are too fast for gdb. :-)
That test has a few threads running the same tight loop, and
constantly hitting a thread-specific breakpoint that needs to be
stepped over. If threads trip on breakpoints fast enough that
linux-nat.c's event pipe associated with SIGCHLD is constantly being
written to, even if the stdin file descriptor also has an event to
handle, gdb never gets to it. because linux-nat.c's pipe comes first
in the set of descriptors served by the poll/select code in the event
loop.
Fix this by having the event loop serve file event sources in
round-robin-like fashion, similarly to how its done in
gdb_do_one_event.
Unfortunately, the poll and the select variants each need their own
fixing.
Tested on x86_64 Fedora 20 (poll and select variants), and PPC64
Fedora 18. Fixes the timeout in the PPC64 machine in the compile farm
that times out without this, and I won't be surprised if it fixes
other random timeouts in other tests.
(gdbserver's copy of the event-loop doesn't need this (yet), as it
still pushes all ready events to an event queue. That is, it hasn't
had
|
|
|
Pedro Alves
|
492d29ea1c |
Split TRY_CATCH into TRY + CATCH
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
|
|
Pedro Alves
|
80bd5fab62 |
Fix build breakage due to event loop simplification
commit
|
|
|
Pedro Alves
|
70b662892c |
Simplify event-loop core, remove two-step event processing
Even with the previous patch installed, we'll still see sigall-reverse.exp occasionally fail. The problem is that the event loop's event handling processing is done in two steps: #1 - poll all event sources, and push new event objects to the event queue, until all event sources are drained. #2 - go through the event queue, processing each event object at a time. For each event, call the associated callback, and deletes the event object from the queue. and then bad things happen if between #1 and #2 something decides that events from an event source that has already queued events shouldn't be processed yet. To do that, we either remove the event source from the list of event sources, or clear its "have events" flag. However, if an event for that source has meanwhile already been pushed in the event queue, #2 will still process it and call the associated callback... One way to fix it that I considered was to do something to the event objects already in the event queue when an event source is no longer interesting. But then I couldn't find any good reason for the two-step process in the first place. It's much simpler (and less code) to call the event source callbacks as we poll the sources and find events. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ 2015-02-03 Pedro Alves <palves@redhat.com> * event-loop.c: Don't declare nor define a queue type for gdb_event_p. (event_queue): Delete. (create_event, create_file_event, gdb_event_xfree) (initialize_event_loop, process_event): Delete. (gdb_do_one_event): Return as soon as one event is handled. (handle_file_event): Change prototype. Used the passed in file_handler pointer and ready_mask instead of looping over all file handlers. (gdb_wait_for_event): Update the poll/select timeouts before blocking. Run event handlers directly instead of queueing events. Return as soon as one event is handled. (struct async_event_handler_data): Delete. (invoke_async_event_handler): Delete. (check_async_event_handlers): Change return type to int. Run event handlers directly instead of queueing events. Return as soon as one event is handled. (handle_timer_event): Delete. (update_wait_timeout): New function, factored out from poll_timers. (poll_timers): Reimplement. * event-loop.h (initialize_event_loop): Delete declaration. * top.c (gdb_init): Don't call initialize_event_loop. |
|
|
Pedro Alves
|
b7d2e91626 |
When disabling target async, remove all target event sources from the event loop
The sigall-reverse.exp test occasionally fails with something like this:
(gdb) PASS: gdb.reverse/sigall-reverse.exp: send signal TERM
continue
Continuing.
The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?([y] or n) FAIL: gdb.reverse/sigall-reverse.exp: continue to signal exit (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to handler of TERM (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to gen_TERM (timeout)
This is another event-loop/async related problem exposed by the patch
that made 'query' use gdb_readline_wrapper (
|
|
|
Joel Brobecker
|
32d0add0a6 |
Update year range in copyright notice of all files owned by the GDB project.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
|
Gary Benson
|
c765fdb902 |
Remove spurious exceptions.h inclusions
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB .c files include defs.h as their first line, so no file other than utils.h needs to include exceptions.h. This commit removes all such inclusions. gdb/ChangeLog: * ada-lang.c: Do not include exceptions.h. * ada-valprint.c: Likewise. * amd64-tdep.c: Likewise. * auto-load.c: Likewise. * block.c: Likewise. * break-catch-throw.c: Likewise. * breakpoint.c: Likewise. * btrace.c: Likewise. * c-lang.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-script.c: Likewise. * completer.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * darwin-nat.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * event-top.c: Likewise. * f-valprint.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * gdbtypes.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * guile/scm-auto-load.c: Likewise. * guile/scm-breakpoint.c: Likewise. * guile/scm-cmd.c: Likewise. * guile/scm-frame.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-param.c: Likewise. * guile/scm-symbol.c: Likewise. * guile/scm-type.c: Likewise. * hppa-hpux-tdep.c: Likewise. * i386-tdep.c: Likewise. * inf-loop.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * interps.h: Likewise. * jit.c: Likewise. * linespec.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32r-rom.c: Likewise. * main.c: Likewise. * memory-map.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * monitor.c: Likewise. * nto-procfs.c: Likewise. * objc-lang.c: Likewise. * p-valprint.c: Likewise. * parse.c: Likewise. * ppc-linux-tdep.c: Likewise. * printcmd.c: Likewise. * probe.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-breakpoint.c: Likewise. * python/py-cmd.c: Likewise. * python/py-finishbreakpoint.c: Likewise. * python/py-frame.c: Likewise. * python/py-framefilter.c: Likewise. * python/py-function.c: Likewise. * python/py-gdb-readline.c: Likewise. * python/py-inferior.c: Likewise. * python/py-infthread.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-linetable.c: Likewise. * python/py-param.c: Likewise. * python/py-prettyprint.c: Likewise. * python/py-symbol.c: Likewise. * python/py-type.c: Likewise. * python/py-value.c: Likewise. * python/python-internal.h: Likewise. * python/python.c: Likewise. * record-btrace.c: Likewise. * record-full.c: Likewise. * regcache.c: Likewise. * remote-fileio.c: Likewise. * remote-mips.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-nat.c: Likewise. * skip.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-ia64-hpux.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib.c: Likewise. * spu-tdep.c: Likewise. * stack.c: Likewise. * stap-probe.c: Likewise. * symfile-mem.c: Likewise. * symmisc.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-interp.c: Likewise. * typeprint.c: Likewise. * utils.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * windows-nat.c: Likewise. * xml-support.c: Likewise. |
|
|
Gary Benson
|
bb974a2493 |
Move errno.h to common-defs.h
This commit moves the inclusion of errno.h to common-defs.h and removes all other inclusions. Note that prior to this commit server.h included errno.h protected by "#ifdef HAVE_ERRNO_H". This protection was added with the Windows CE port, which is currently broken. Since no other platform needs this, I have removed the protection and the configury to support it. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include errno.h. * defs.h: Do not include errno.h. * ada-typeprint.c: Likewise. * c-typeprint.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * event-loop.c: Likewise. * f-typeprint.c: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * m2-typeprint.c: Likewise. * nat/linux-btrace.c: Likewise. * p-typeprint.c: Likewise. * procfs.c: Likewise. * remote-sim.c: Likewise. * rs6000-nat.c: Likewise. * target.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * configure.ac (AC_CHECK_HEADERS): Remove errno.h. * configure: Regenerate. * config.in: Likewise. * server.h: Do not include errno.h. * event-loop.c: Likewise. * hostio-errno.c: Likewise. * linux-low.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. * gdbreplay.c: Unconditionally include errno.h. |
|
|
Gary Benson
|
6d3d12ebef |
Include string.h in common-defs.h
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. |
|
|
Gary Benson
|
dccbb60975 |
Include gdb_assert.h in common-defs.h
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h. |
|
|
Pedro Alves
|
92bcb5f949 |
Make display_gdb_prompt CLI-only.
Enabling target-async by default will require implementing sync execution on top of an async target, much like foreground command are implemented on the CLI in async mode. In order to do that, we will need better control of when to print the MI prompt. Currently the interp->display_prompt_p hook is all we have, and MI just always returns false, meaning, make display_gdb_prompt a no-op. We'll need to be able to know to print the MI prompt in some of the conditions that display_gdb_prompt is called from the core, but not all. This is all a litte twisted currently. As we can see, display_gdb_prompt is really CLI specific, so make the console interpreters (console/tui) themselves call it. To be able to do that, and add a few different observers that the interpreters can use to distinguish when or why the the prompt is being printed: #1 - one called whenever a command is cancelled due to an error. #2 - another for when a foreground command just finished. In both cases, CLI wants to print the prompt, while MI doesn't. MI will want to print the prompt in the second case when in a special MI mode. The display_gdb_prompt call in interp_set made me pause. The comment there reads: /* Finally, put up the new prompt to show that we are indeed here. Also, display_gdb_prompt for the console does some readline magic which is needed for the console interpreter, at least... */ But, that looks very much like a no-op to me currently: - the MI interpreter always return false in the prompt hook, meaning actually display no prompt. - the interpreter used at that point is still quiet. And the console/tui interpreters return false in the prompt hook if they're quiet, meaning actually display no prompt. The only remaining possible use would then be the readline magic. But whatever that might have been, it's not reacheable today either, because display_gdb_prompt returns early, before touching readline if the interpreter returns false in the display_prompt_p hook. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete. (_initialize_cli_interp): Adjust. * event-loop.c: Include "observer.h". (start_event_loop): Notify 'command_error' observers instead of calling display_gdb_prompt. Remove FIXME comment. * event-top.c (display_gdb_prompt): Remove call into the interpreters. * inf-loop.c: Include "observer.h". (inferior_event_handler): Notify 'command_error' observers instead of calling display_gdb_prompt. * infrun.c (fetch_inferior_event): Notify 'sync_execution_done' observers instead of calling display_gdb_prompt. * interps.c (interp_set): Don't call display_gdb_prompt. (current_interp_display_prompt_p): Delete. * interps.h (interp_prompt_p): Delete declaration. (interp_prompt_p_ftype): Delete. (struct interp_procs) <prompt_proc_p>: Delete field. (current_interp_display_prompt_p): Delete declaration. * mi-interp.c (mi_interpreter_prompt_p): Delete. (_initialize_mi_interp): Adjust. * tui-interp.c (tui_init): Install 'sync_execution_done' and 'command_error' observers. (tui_on_sync_execution_done, tui_on_command_error): New functions. (tui_display_prompt_p): Delete. (_initialize_tui_interp): Adjust. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> * observer.texi (sync_execution_done, command_error): New subjects. |
|
|
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | |
|
Tom Tromey
|
0e9f083f4c |
remove gdb_string.h
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
|
Yao Qi
|
843b20dc1d |
gdb/
* event-loop.c: Include "queue.h". (gdb_event_p): New typedef. (DECLARE_QUEUE_P): Use. (DEFINE_QUEUE_P): Use. (async_queue_event): Remove. (gdb_event_xfree): New. (initialize_event_loop): New. (process_event): Use QUEUE macros. (event_queue): Remove. (gdb_wait_for_event): Caller update. (check_async_event_handlers): Likewise. (poll_timers): Likewise. * event-loop.h (initialize_event_loop): Declare. * event-loop.c (gdb_event_xfree): New. * top.c (gdb_init): Call initialize_event_loop. |
|
|
Yao Qi
|
20ad88565a |
gdb/
* event-loop.c (async_queue_event): Remove one parameter 'position'. Remove code handling 'position' == TAIL. (gdb_wait_for_event): Caller update. (check_async_event_handlers): Caller update. (poll_timers): Caller update. * event-loop.h (enum queue_position): Remove. |
|
|
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
|
Joel Brobecker
|
0b30217134 |
Copyright year update in most files of the GDB Project.
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
|
Pedro Alves
|
e0dd0826e2 |
2011-08-04 Pedro Alves <pedro@codesourcery.com>
* event-loop.c (gdb_do_one_event): Remove `data' parameter. (start_event_loop): Use TRY_CATCH instead of catch_errors. * event-loop.h (gdb_do_one_event): Remove `data' parameter. * top.c (gdb_readline_wrapper): Adjust. * tui/tui-interp.c (tui_command_loop): (_initialize_tui_interp): Don't install it. |
|
|
Andreas Schwab
|
652c71b432 |
PR gdb/8677
* event-loop.c (handle_file_event): Don't handle POLLHUP as error. |
|
|
Michael Snyder
|
60bc018fc6 |
2011-03-11 Michael Snyder <msnyder@vmware.com>
* event-loop-c (delete_async_signal_handler): Assert prev_ptr. (delete_async_event_handler): Ditto. |
|
|
Michael Snyder
|
3e43a32aaa |
2011-01-05 Michael Snyder <msnyder@vmware.com>
* addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto. |
|
|
Joel Brobecker
|
7b6bb8daac | run copyright.sh for 2011. | |
|
Michael Snyder
|
371d5dec8e |
2010-12-28 Michael Snyder <msnyder@vmware.com>
* event-loop.c: Comment clean-up. * event-loop.h: Ditto. * event-top.c: Ditto. * gdb.c: Ditto. * gdb.h: Ditto. * main.c: Ditto. * top.c: Ditto. * top.h: Ditto. |
|
|
Doug Evans
|
01f69b386b |
* event-loop.h (GDB_READABLE, GDB_WRITABLE, GDB_EXCEPTION): Move to ...
* event-loop.c: ... here. * tui/tui-io.c (tui_readline_output): Rename parameter `code' to `error' for clarity. (tui_getc): Pass correct value for `error' parameter to tui_readline_output. |
|
|
Michael Snyder
|
d7f9d72972 |
2010-05-14 Michael Snyder <msnyder@vmware.com>
* elfread.c: White space. * environ.c: White space. * eval.c: White space. * event-loop.c: White space. * event-top.c: White space. * exceptions.c: White space. * exec.c: White space. * expprint.c: White space. |
|
|
Doug Evans
|
ae462839ef |
* event-loop.c (gdb_timer): Delete unused global.
(create_timer): Update. |
|
|
Joel Brobecker
|
d5cd603472 |
Delete unused or undefined functions.
* breakpoint.c (ep_parse_optional_filename): Delete.
* dcache.c (dcache_write_line): Remove declaration.
* infrun.c (build_infrun): Remove declaration.
* tracepoint.c (tracepoint_save_command): Remove declaration.
* linux-nat.c (init_lwp_list): Delete. No longer used.
* event-loop.c (check_async_signal_handlers): Delete declaration.
* infrun.c (init_execution_control_state): Delete.
(proceed): Update comment to avoid mentioning
init_execution_control_state.
* target.c (kill_or_be_killed, nosupport_runtime): Delete.
* ada-lang.c (ada_to_static_fixed_value): Delete.
* scm-lang.c (evaluate_subexp_scm): Delete declaration.
* cp-namespace.c (cp_copy_usings): Delete.
* xml-syscall.c (xml_number_of_syscalls): Delete.
* progspace.c (find_program_space_by_num): Delete.
* inflow.c (handle_sigio): Delete declaration.
* hppa-tdep.c (hppa_alignof): Delete.
* mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
(mipsnbsd_core_osabi_sniffer): Delete.
|
|
|
Joel Brobecker
|
4c38e0a4fc |
Update copyright year in most headers.
Automatic update by copyright.sh. |
|
|
Pierre Muller
|
905e0470f4 |
ARI fix: OP eol rule.
* doublest.c (floatformat_from_length): Avoid operator at end of line. * dwarf2-frame.c (dwarf2_build_frame_info): Idem. * dwarf2read.c (read_array_order, dwarf_decode_macros): Idem. * eval.c (evaluate_subexp_standard): Idem. * event-loop.c (create_timer, handle_timer_event): Idem. * expprint.c (print_subexp_standard): Idem. * f-exp.y (variable): Idem. * f-typeprint.c (f_print_type): Idem. |
|
|
Joel Brobecker
|
0fb0cc7590 | Updated copyright notices for most files. | |
|
Pedro Alves
|
50d0174816 |
* event-loop.h: Mention async_event_handlers.
(async_event_handler): Forward declare. (async_event_handler_func): New typedef. (create_async_event_handler, delete_async_event_handler) (mark_async_event_handler): Declare. * event-loop.c (event_data): New. (event_handler_func): Take an event_data instead of an integer. (struct gdb_event): Replace the integer file descriptor by a generic event_data. (async_event_handler): New. (async_handler_ready): Delete. (async_event_handler_list): New. (create_event): New. (create_file_event): Use it. (process_event): Adjust. (gdb_do_one_event): Poll from the event sources in round-robin fashion across calls. Be sure to consult all sources before blocking. (handle_file_event): Take an event_data instead of an integer. Adjust. (gdb_wait_for_event): Add `block' argument. Handle it. (mark_async_signal_handler): Remove unneeded cast. (invoke_async_signal_handler): Rename to ... (invoke_async_signal_handlres): ... this. Return true if any was handled. (check_async_ready): Delete (create_async_event_handler): New. (mark_async_event_handler): New. (struct async_event_handler_data): New. (invoke_async_event_handler): New. (check_async_event_handlers): New. (delete_async_event_handler): New. (handle_timer_event): Adjust. |
|
|
Vladimir Prus
|
712af3be2e |
* defs.h (do_exec_error_cleanups, discard_exec_error_cleanups)
(make_exec_error_cleanup): Remove declarations. * utils.c (exec_error_cleanup_chain): Remove. (do_exec_error_cleanups, discard_exec_error_cleanups) (make_exec_error_cleanup): Remove. * event-loop.c (start_event_loop): Adjust call to async_enable_stdin. * event-top.c (async_enable_stdin): Remove the paramater dummy. (async_disable_stdin): Don't register async_enable_stdin via cleanup. * inf-loop.c (inferior_event_handler): Don't call do_exec_error_cleanups. Call async_enable_stdin instead. * event-loop.c (start_event_loop): Adjust call to async_enable_stdin. * tui/tui-interp.c (tui_command_loop): Adjust call to async_enable_stdin. |
|
|
Vladimir Prus
|
32c1e744c1 |
Async mode fixes.
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
|
|
|
Daniel Jacobowitz
|
b803fb0f0f |
* Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update.
* event-loop.c (call_async_signal_handler): New. * event-loop.h (call_async_signal_handler) (gdb_call_async_signal_handler): Declare. (mark_async_signal_handler): Add comments. * event-top.c (handle_sigint): Use gdb_call_async_signal_handler. * mingw-hdep.c (sigint_event, sigint_handler): New. (gdb_select): Use them. Wait for the readline signal handler to finish. (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions. * posix-hdep.c (gdb_call_async_signal_handler): New function. * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt): New. (remote_fileio_ctrl_c_signal_handler): Use gdb_call_async_signal_handler. (initialize_remote_fileio): Initialize sigint_fileio_token. * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do not initialize tokens here. (handle_remote_sigint_twice): Likewise. Reinstall handle_remote_sigint. (async_remote_interrupt_twice): Just call interrupt_query. (cleanup_sigint_signal_handler): Do not delete tokens. (remote_interrupt, remote_interrupt_twice): Use gdb_call_async_signal_handler. (interrupt_query): Reinstall the default signal handler. (_initialize_remote): Initialize tokens here. |
|
|
Daniel Jacobowitz
|
9b254dd1ce | Updated copyright notices for most files. | |
|
Joel Brobecker
|
a9762ec78a |
Switch the license of all .c files to GPLv3.
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
|
Michael Snyder
|
32107cd542 |
2007-08-18 Michael Snyder <msnyder@access-company.com>
* event-loop.c (delete_async_signal_handler): Move pointer null test to before pointer dereference. |
|
|
Michael Snyder
|
dc66ab8ae2 | event-loop.c (gdb_wait_for_event): Move statement into if block. | |
|
Daniel Jacobowitz
|
6aba47ca06 | Copyright updates for 2007. | |
|
Daniel Jacobowitz
|
0ea3f30e21 |
* NEWS: Mention native Windows support.
* Makefile.in (gdb_select_h, ser_tcp_h): New. (ALLDEPFILES): Add ser-mingw.c. (event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o) (ser-tcp.o, ser-unix.o): Update. (ser-mingw.o): New rule. * configure: Regenerated. * configure.ac: Add ser-mingw.o for mingw32. * ser-mingw.c: New file. * event-loop.c: Include "gdb_select.h". (gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c. * ser-base.c: Include "gdb_select.h". (ser_base_wait_for): Use gdb_select. * serial.c (serial_for_fd): New function. (serial_fdopen): Try "terminal" before "hardwire". Initialize the allocated struct serial. (serial_wait_handle): New function. * serial.h (serial_for_fd, serial_wait_handle): New prototypes. (struct serial_ops) [USE_WIN32API]: Add wait_handle. * gdb_select.h: New file. * ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include. (net_close, net_read_prim, net_write_prim): Make global. (net_open): Likewise. Pass an exception set to select. Whitespace fix. Document why we can not use gdb_select. (_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here. * ser-tcp.h: New file. * inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here. (handle_sigio): Use gdb_select. (initialize_stdin_serial): New function. * terminal.h (initialize_stdin_serial): New prototype. * top.c (gdb_init): Call initialize_stdin_serial. * mingw-hdep.c (gdb_select): New function, moved from gdb_select in event-loop.c. Add exception condition support. Use serial_for_fd and serial_wait_handle. Fix timeout handling. * posix-hdep.c: Include "gdb_select.h". (gdb_select): New function. * remote-st.c (connect_command): Use gdb_select. * ser-unix.c: Include "gdb_select.h". (hardwire_send_break, wait_for): Use gdb_select. |
|
|
Mark Mitchell
|
6da866186a |
* event-loop.c (gdb_select): Detect file descriptors that have
been closed. |
|
|
Eli Zaretskii
|
197e01b6dc |
* breakpoint.c:
* arm-tdep.c: * ia64-tdep.c: * i386-tdep.c: * hpread.c: * hppa-tdep.c: * hppa-hpux-tdep.c: * gnu-nat.c: * gdbtypes.c: * gdbarch.h: * gdbarch.c: * eval.c: * dwarf2read.c: * dbxread.c: * copying: * symfile.c: * stabsread.c: * sh64-tdep.c: * sh-tdep.c: * s390-tdep.c: * rs6000-tdep.c: * remote.c: * remote-mips.c: * mips-tdep.c: * mdebugread.c: * linux-nat.c: * infrun.c: * xcoffread.c: * win32-nat.c: * valops.c: * utils.c: * tracepoint.c: * target.c: * symtab.c: * c-exp.y: * ada-valprint.c: * ada-typeprint.c: * ada-lex.l: * ada-lang.h: * ada-lang.c: * ada-exp.y: * alphafbsd-tdep.c: * alphabsd-tdep.h: * alphabsd-tdep.c: * alphabsd-nat.c: * alpha-tdep.h: * alpha-tdep.c: * alpha-osf1-tdep.c: * alpha-nat.c: * alpha-mdebug-tdep.c: * alpha-linux-tdep.c: * alpha-linux-nat.c: * aix-thread.c: * abug-rom.c: * arch-utils.c: * annotate.h: * annotate.c: * amd64obsd-tdep.c: * amd64obsd-nat.c: * amd64nbsd-tdep.c: * amd64nbsd-nat.c: * amd64fbsd-tdep.c: * amd64fbsd-nat.c: * amd64bsd-nat.c: * amd64-tdep.h: * amd64-tdep.c: * amd64-sol2-tdep.c: * amd64-nat.h: * amd64-nat.c: * amd64-linux-tdep.c: * amd64-linux-nat.c: * alphanbsd-tdep.c: * block.h: * block.c: * bfd-target.h: * bfd-target.c: * bcache.h: * bcache.c: * ax.h: * ax-general.c: * ax-gdb.h: * ax-gdb.c: * avr-tdep.c: * auxv.h: * auxv.c: * armnbsd-tdep.c: * armnbsd-nat.c: * arm-tdep.h: * arm-linux-nat.c: * arch-utils.h: * charset.c: * call-cmds.h: * c-valprint.c: * c-typeprint.c: * c-lang.h: * c-lang.c: * buildsym.h: * buildsym.c: * bsd-uthread.h: * bsd-uthread.c: * bsd-kvm.h: * bsd-kvm.c: * breakpoint.h: * core-regset.c: * core-aout.c: * completer.h: * completer.c: * complaints.h: * complaints.c: * command.h: * coffread.c: * coff-solib.h: * coff-solib.c: * coff-pe-read.h: * coff-pe-read.c: * cli-out.h: * cli-out.c: * charset.h: * dink32-rom.c: * dictionary.h: * dictionary.c: * demangle.c: * defs.h: * dcache.h: * dcache.c: * d10v-tdep.c: * cpu32bug-rom.c: * cp-valprint.c: * cp-support.h: * cp-support.c: * cp-namespace.c: * cp-abi.h: * cp-abi.c: * corelow.c: * corefile.c: * environ.c: * elfread.c: * dwarfread.c: * dwarf2loc.c: * dwarf2expr.h: * dwarf2expr.c: * dwarf2-frame.h: * dwarf2-frame.c: * dve3900-rom.c: * dummy-frame.h: * dummy-frame.c: * dsrec.c: * doublest.h: * doublest.c: * disasm.h: * disasm.c: * fork-child.c: * findvar.c: * fbsd-nat.h: * fbsd-nat.c: * f-valprint.c: * f-typeprint.c: * f-lang.h: * f-lang.c: * expression.h: * expprint.c: * exec.h: * exec.c: * exceptions.h: * exceptions.c: * event-top.h: * event-top.c: * event-loop.h: * event-loop.c: * gdb.c: * gdb-stabs.h: * gdb-events.h: * gdb-events.c: * gcore.c: * frv-tdep.h: * frv-tdep.c: * frv-linux-tdep.c: * frame.h: * frame.c: * frame-unwind.h: * frame-unwind.c: * frame-base.h: * frame-base.c: * gdb_vfork.h: * gdb_thread_db.h: * gdb_string.h: * gdb_stat.h: * gdb_regex.h: * gdb_ptrace.h: * gdb_proc_service.h: * gdb_obstack.h: * gdb_locale.h: * gdb_dirent.h: * gdb_curses.h: * gdb_assert.h: * gdbarch.sh: * gdb.h: * hpux-thread.c: * hppabsd-nat.c: * hppa-tdep.h: * hpacc-abi.c: * h8300-tdep.c: * gregset.h: * go32-nat.c: * gnu-v3-abi.c: * gnu-v2-abi.h: * gnu-v2-abi.c: * gnu-nat.h: * glibc-tdep.c: * gdbtypes.h: * gdbcore.h: * gdbcmd.h: * i386nbsd-tdep.c: * i386nbsd-nat.c: * i386gnu-tdep.c: * i386gnu-nat.c: * i386fbsd-tdep.c: * i386fbsd-nat.c: * i386bsd-tdep.c: * i386bsd-nat.h: * i386bsd-nat.c: * i386-tdep.h: * i386-sol2-nat.c: * i386-nto-tdep.c: * i386-nat.c: * i386-linux-tdep.h: * i386-linux-tdep.c: * i386-linux-nat.c: * i386-cygwin-tdep.c: * inf-ttrace.c: * inf-ptrace.h: * inf-ptrace.c: * inf-loop.h: * inf-loop.c: * inf-child.h: * inf-child.c: * ia64-tdep.h: * ia64-linux-nat.c: * i387-tdep.h: * i387-tdep.c: * i386v4-nat.c: * i386v-nat.c: * i386obsd-tdep.c: * i386obsd-nat.c: * kod.c: * jv-valprint.c: * jv-typeprint.c: * jv-lang.h: * jv-lang.c: * irix5-nat.c: * iq2000-tdep.c: * interps.h: * interps.c: * inftarg.c: * inflow.h: * inflow.c: * inferior.h: * infcmd.c: * infcall.h: * infcall.c: * inf-ttrace.h: * m32r-tdep.h: * m32r-tdep.c: * m32r-rom.c: * m32r-linux-tdep.c: * m32r-linux-nat.c: * m2-valprint.c: * m2-typeprint.c: * m2-lang.h: * m2-lang.c: * lynx-nat.c: * linux-thread-db.c: * linux-nat.h: * linespec.c: * libunwind-frame.h: * libunwind-frame.c: * language.h: * language.c: * macroexp.c: * macrocmd.c: * m88kbsd-nat.c: * m88k-tdep.h: * m88k-tdep.c: * m68klinux-tdep.c: * m68klinux-nat.c: * m68kbsd-tdep.c: * m68kbsd-nat.c: * m68k-tdep.h: * m68k-tdep.c: * mips-linux-nat.c: * mips-irix-tdep.c: * minsyms.c: * memattr.h: * memattr.c: * mem-break.c: * mdebugread.h: * main.h: * main.c: * macrotab.h: * macrotab.c: * macroscope.h: * macroscope.c: * macroexp.h: * nbsd-tdep.c: * mt-tdep.c: * monitor.h: * monitor.c: * mn10300-tdep.h: * mn10300-tdep.c: * mn10300-linux-tdep.c: * mipsv4-nat.c: * mipsread.c: * mipsnbsd-tdep.h: * mipsnbsd-tdep.c: * mipsnbsd-nat.c: * mips64obsd-tdep.c: * mips64obsd-nat.c: * mips-tdep.h: * mips-mdebug-tdep.c: * mips-linux-tdep.c: * osabi.h: * osabi.c: * ocd.h: * ocd.c: * observer.c: * objfiles.h: * objfiles.c: * objc-lang.h: * objc-lang.c: * objc-exp.y: * nto-tdep.h: * nto-tdep.c: * nto-procfs.c: * nlmread.c: * nbsd-tdep.h: * ppcobsd-tdep.c: * ppcobsd-nat.c: * ppcnbsd-tdep.h: * ppcnbsd-tdep.c: * ppcnbsd-nat.c: * ppcbug-rom.c: * ppc-tdep.h: * ppc-sysv-tdep.c: * ppc-linux-tdep.c: * ppc-linux-nat.c: * ppc-bdm.c: * parser-defs.h: * parse.c: * p-valprint.c: * p-typeprint.c: * p-lang.h: * p-lang.c: * remote-fileio.h: * remote-fileio.c: * remote-est.c: * remote-e7000.c: * regset.h: * regset.c: * reggroups.h: * reggroups.c: * regcache.h: * regcache.c: * proc-why.c: * proc-service.c: * proc-events.c: * printcmd.c: * ppcobsd-tdep.h: * sentinel-frame.h: * sentinel-frame.c: * scm-valprint.c: * scm-tags.h: * scm-lang.h: * scm-lang.c: * scm-exp.c: * s390-tdep.h: * rom68k-rom.c: * remote.h: * remote-utils.c: * remote-st.c: * remote-sim.c: * remote-sds.c: * remote-rdp.c: * remote-rdi.c: * remote-hms.c: * sim-regno.h: * shnbsd-tdep.h: * shnbsd-tdep.c: * shnbsd-nat.c: * sh-tdep.h: * serial.h: * serial.c: * ser-unix.h: * ser-unix.c: * ser-tcp.c: * ser-pipe.c: * ser-go32.c: * ser-e7kpc.c: * ser-base.h: * ser-base.c: * solib.c: * solib-svr4.h: * solib-svr4.c: * solib-sunos.c: * solib-som.h: * solib-som.c: * solib-pa64.h: * solib-pa64.c: * solib-osf.c: * solib-null.c: * solib-legacy.c: * solib-irix.c: * solib-frv.c: * solib-aix5.c: * sol-thread.c: * sparc64-linux-tdep.c: * sparc64-linux-nat.c: * sparc-tdep.h: * sparc-tdep.c: * sparc-sol2-tdep.c: * sparc-sol2-nat.c: * sparc-nat.h: * sparc-nat.c: * sparc-linux-tdep.c: * sparc-linux-nat.c: * source.h: * source.c: * somread.c: * solist.h: * solib.h: * std-regs.c: * stack.h: * stack.c: * stabsread.h: * sparcobsd-tdep.c: * sparcnbsd-tdep.c: * sparcnbsd-nat.c: * sparc64obsd-tdep.c: * sparc64nbsd-tdep.c: * sparc64nbsd-nat.c: * sparc64fbsd-tdep.c: * sparc64fbsd-nat.c: * sparc64-tdep.h: * sparc64-tdep.c: * sparc64-sol2-tdep.c: * sparc64-nat.c: * ui-file.c: * typeprint.h: * typeprint.c: * tramp-frame.h: * tramp-frame.c: * trad-frame.h: * trad-frame.c: * tracepoint.h: * top.c: * tobs.inc: * thread.c: * terminal.h: * target.h: * symfile.h: * stop-gdb.c: * vaxbsd-nat.c: * vax-tdep.h: * vax-tdep.c: * vax-nat.c: * varobj.h: * varobj.c: * value.h: * value.c: * valprint.h: * valprint.c: * v850-tdep.c: * uw-thread.c: * user-regs.c: * ui-out.h: * ui-out.c: * ui-file.h: * xcoffsolib.h: * xcoffsolib.c: * wrapper.c: * wince.c: * wince-stub.h: * wince-stub.c: * vaxobsd-tdep.c: * vaxnbsd-tdep.c: * gdb_gcore.sh: * copying.c: * configure.ac: * aclocal.m4: * acinclude.m4: * reply_mig_hack.awk: * observer.sh: * gdb_mbuild.sh: * arm-linux-tdep.c: * blockframe.c: * dbug-rom.c: * environ.h: * dwarf2loc.h: * gdb-events.sh: * glibc-tdep.h: * gdb_wait.h: * gdbthread.h: * i386-sol2-tdep.c: * hppabsd-tdep.c: * hppa-linux-nat.c: * hppa-hpux-nat.c: * ia64-linux-tdep.c: * infptrace.c: * linespec.h: * maint.c: * mips-mdebug-tdep.h: * remote-m32r-sdi.c: * s390-nat.c: * rs6000-nat.c: * remote-utils.h: * sh3-rom.c: * sh-linux-tdep.c: * top.h: * symtab.h: * symmisc.c: * symfile-mem.c: * srec.h: * user-regs.h: * version.h: * valarith.c: * xstormy16-tdep.c: * wrapper.h: * Makefile.in: * f-exp.y: * cris-tdep.c: * cp-name-parser.y: * procfs.c: * proc-utils.h: * proc-flags.c: * proc-api.c: * p-exp.y: * m68hc11-tdep.c: * m2-exp.y: * kod.h: * kod-cisco.c: * jv-exp.y: * hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF address. |