* genscripts.sh: Put the scripts in the ldscripts directory, not
emulations.
* configure.in (ldscripts): Make, instead of emulations.
* Makefile.in (scriptdir): Take off the "ld" part.
(install, clean, distclean): Use ldscripts, not emulations.
In tests, pass -L., not -Lemulations.
(ldmain.o): Don't pass -DSCRIPTDIR=....
* ldlang.c (lang_process): Add "ldscripts/" to the name of the
default script file.
parallel without colliding on yacc's static file names. Without the
stub rule, make will try to start two yacc's concurrently which
fails because of yacc's static file names.
It wasn't documented (or likely used) and wastes time.
(try_open): If EXTEN is empty, don't try it.
* ldctor.c, lderror.c, ldexp.c, ldfile.c, ldindr.c, ldlang.c,
ldlex.l, ldmain.c, ldmisc.c, ldsym.c, ldver.c, ldwarn.c,
ldwrite.c, lexsup.c, mri.c, relax.c: Replace DEFUN macro calls
with normal function declarations.
* Move *.em to emultempl/*.em. Move *.sh to emulparams/*.sh.
Move *.sc-sh to scripttempl/*.sc.
* {emultempl,emulparams,scripttempl}/README: New files.
* sh.em, st2000.em, z8ksim.em, h8300hms.em, h8500hms.em: Files
removed, replaced with generic.em.
* h8300.sh, h8500.sh, h8300.sc, h8500.sc: Renamed from
h8[35]00hms.s[ch]. Change their contents to omit the "hms".
* *.em (*_get_script): Return script name instead of script contents.
* ldlang.c (lang_process): Change caller.
* ldlex.l, ldgram.y: Recognize -m option.
Check for input files after *all* options in grammar.
* ldmain.c (main): Check for -m options. Add default directory
for -m.
* mkscript.c: File removed.
* genscripts.sh: Take two more parameters, tooldirlib and libdir,
to add to the default LIB_PATH.
Look for input files in the new subdirectories.
Create the scripts in emulations subdirectory and don't filter
them through mkscript.
* configure.in: Make the emulations subdirectory.
* Makefile.in: Account for all of the above changes.
Remove unused .SUFFIXES. Get libgcc.a path with gcc
-print-libgcc-file-name instead of $(libdir)/libgcc.a.
Put CFLAGS last in the compilation rules.
Add -I../bfd to INCLUDES so sysdep.h is found.
* ldfile.c (try_open): If opening without the extension fails,
try with the extension even if -v or -V was given.
had_script is imported (from ldgram.y), not exported.
* ldgram.y (statement_list_opt): New nonterminal, either empty or
statement_list.
(section): Use statement_list_opt, not statement_list.
* m68kcoff.sc-sh: Gather constructors and destructors and define
__CTOR_LIST__ and __DTOR_LIST__ appropriately.
* sa29200.sc-sh: Gather constructors and destructors and define
___CTOR_LIST__ and ___DTOR_LIST__ appropriately.
(mips-idt-ecoff*): Added trailing '*'.
* config/mips-idtl.mt: New file; use EMUL of mipsidtl.
* mipsidtl.sh: New file; like mipsidt.sh, but little endian.
* Makefile.in (ALL_EMULATIONS): Added em_mipsidtl.o.
Conditionalize manual to maintain Cygnus, Hitachi versions in parallel.
(Texinfo conditionals are stable enough to permit this, at last!)
NOTE: @ignore'd passages from earlier versions DELETED; use CVS history
to retrieve if wanted.
gen-doc.texi, h8-doc.texi: manual configuration definitions.
Makefile.in: link config defn (`gen' by default) to configdoc.texi, included
by ld.texinfo
.Sanitize: add gen-doc.texi, h8-doc.texi
* ldindr.c (add_indirect): Keep more information in the alias
symbol chain.
* ldlang.c (wild_doit): Don't inherit NEVER_LOAD section
attribute from an input section.
* ldmain.c (Q_enter_file_symbols): Common section is NEVER_LOAD by
default. (Q_enter_file_symbos): Indirect symbols now are known by
their section, not a special symbol flag.
* ldsym.c (write_file_locals): Indirect symbols aren't local.
(write_file_globals): Write the mapping for an indirect symbol.
* relax.c (build_it): When forced to write a NEVER_LOAD section,
fill it with zeros.
specific emulation.
* mipsidt.sh: New file; emulation for IDT MIPS board.
* Makefile.in (ALL_EMULATIONS): Added em_mipsidt.o.
(em_mipsidt.c): New target. Uses mipsidt.sh and mips.sc-sh.
* config/mips-idt.mt: New file; sets EMUL to mipsidt.
* configure.in (mips-idt-ecoff): New target; uses mips-idt.
* ldlang.c (lang_relocate_globals): avoid possible hang with
undefined but unreferenced symbols.
* relax.c (relax_section): don't complain if the script file isn't
relaxable but -relax is set
* ldlang.c (lang_relocate_globals): avoid possible hang with
undefined but unreferenced symbols.
* relax.c (relax_section): don't complain if the script file isn't
relaxable but -relax is set
* mips.sc-sh: Put .scommon sections into .sbss section.
* ldmain.c (subfile_wanted_p): Preserve section of common symbols,
rather than always putting them in bfd_com_section.
* ldlang.c (lang_common): If a common symbol is not in
bfd_com_section, put in a section of the same name, rather than
always putting it in section COMMON.
* ldmain.c (subfile_wanted_p): If we already have a common
definition of a symbol, don't necessarily pull in an object file
that provides a non-common definition.
* ldlex.l (COMMAND): Accept -EB and -EL command line arguments,
returning OPTION_EB and OPTION_EL. gcc passes these to a MIPS
linker.
* ldgram.y (OPTION_EB, OPTION_EL): New tokens.
(command_line_option): Accept and ignore OPTION_EB and OPTION_EL.
* mips.sc-sh: New file. Ultrix, and hopefully other MIPS ECOFF
targets, linker script.
* mipslit.sh: New file. Little endian MIPS emulation.
* config/mips-lit.mt: New file. Use mipslit emulation.
* configure.in (mips-dec-ultrix*): Use target mips-lit.
* Makefile.in (ALL_EMULATIONS): Added em_mipslit.o.
(em_mipslit.c): New target. Uses mipslit.sh.
* ldwrite.c: Removed perform_relocation, copy_and_relocate, and
write_norel. All linking is now done via write_relax. Call
ldsym_write before calling write_relax.
* relax.c: Added copyright.
(write_relax): Renamed from write_relaxnorel. Added relocateable
argument. seclet_dump renamed to bfd_seclet_link.
* relax.h: Added copyright.
* m68kcoff.sc-sh: define _end as well as end, for consistency with
aout.sc-sh.
* configure.in: accept *-ericsson-ose for any m68k CPU.
* ldwrite.c (write_rel): don't always set SEC_HAS_CONTENTS flag
for each output section.
macro bfd_asymbol_bfd as appropriate.
* Makefile.in: Un-duplicate ldlex.c dependency.
* condigure.in: Replace my_host case table by sourcing
../bfd/configure.host. Allow std-host as the default.
* ldmisc.c: Change logic for C++ name demangling: There is
no initial '_' to remove from stab-derived function names.
* ld.texinfo: new doc.
* ldgram.y, ldlex.l: understand -y<symbol>
* ldmain.c (Q_enter_file_symbols): if had -y, lookup symbol and
print info. (add_ysym): new function.
* ldsym.h: (ldsym_type): new define SYM_Y.
ldlang.h, ldlex.h, ldmain.h, ldmisc.h, ldsym.h, ldver.h, ldwarn.h,
ldwrite.h, relax.h: Replace all uses of EXFUN and PROTO ansi-glue
macros with PARAMS. Recreational cleanup. Update copyrights.
* Support for i386-sysv.
configure.in: check for i386-*-sysv* and i386-*-sco*.
i386coff.sc-sh: rewrote to support SVR3 by default.
ldctor.c (find_constructors): preserve stat_ptr.
ldlang.c (wild_doit): initialize vma and size of new output
section to corresponding input section. This is required for
shared library support.
(lang_size_sections): don't modify vma and size of sections which
are never loaded (for shared libraries).
ldwrite.c (copy_and_relocate): copy the contents of any section
which has contents, not just sections which are loaded (for shared
libraries).
mri.o, relax.o): Indicate dependence on ldgram.h.
* ld.h (strip_symbols_type): Add value STRIP_SOME.
* ldgram.y (OPTION_RETAIN_SYMBOLS_FILE): New terminal token.
(lang_add_keepsyms_file): New function.
* ldlex.l: Handle "-retain-symbols-file".
* ldsym.c (keepsyms_file, kept_syms): New vars.
(process_keepsyms): New functihon; reads file, marks symbols for saving.
(write_file_locals): File symbols should always be kept.
(ldsym_write): Warn about "-retain-symbols-file" overriding "-S" and "-s".
Process retain-symbols file before setting symtab.
* ldsym.h (SYM_KEEP): New flag for ldsym_type flags.
(keepsyms_file, kept_syms): Declare them.
* ldmain.c (main): Non-fatal errors should still cause non-zero exit status
even with -r.
Added initial support for the z8k
* z8ksim.em, z8ksim.sc-sh, z8ksim.sh: new files
* configure.in, Makefile.in: modified to reflect above
* ldlang.c (lang_check): when linking conflicting architectures,
make the output file reflect at least one of the bad inputs.
please let me know, or plug them in yourself.
Wed Sep 9 11:52:58 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
added m68k-coff emulation mode, stolen from a29k emulation.
Almost certainly wrong, but perhaps better than sun3.
please let me know, or plug them in yourself.
Wed Sep 9 11:52:58 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
added m68k-coff emulation mode, stolen from a29k emulation.
Almost certainly wrong, but perhaps better than sun3.
Also fixed an error message in configure.in so that it started with
'***' like the other error messages do.
gld960.em, h8300hms.em, h8300xray.em, lnk960.em, st2000.em,
vanilla.em: Rename all (generated) ld__*.c files to em_.c.
This is one character shorter, and lets people build on
SVR3 system. (ld__h8300xray.[co] was the killer there;
h8300xray.sc-sh is also overlong, but seems harmless.)
Based on a patch from Jonathan Ryshpan <hitachi!amito!jon>.
* Makefile.in (clean): Fix typo mostclean -> mostlyclean.
* configure.in: Add host isc.
abs_output_section is what is required.
* ldwrite.c (ldwrite): use malloc to allocate the largest space
used, and pass that down.
* relax.c,relax.h (write_relaxnorel): use the passed malloc area rather
than alloca.
