* p-typeprint.c: Fix 11 ARI reported problems.
(pascal_print_type): Fix 4 operator at end of line.
(pascal_type_print_method_args) : Replace 2 DEPRECATED_STREQN macros
using strncmp function.
(pascal_type_print_base): Fix 2 operator at end of line.
(pascal_type_print_base) : Replace 3 DEPRECATED_STREQN macros
using strncmp function.
* p-exp.y: Fix 12 ARI reported problems.
(name_not_typename): Fix 2 operator at end of line issues.
(yylex): Fix 3 operator at end of line issues.
Replace 7 DEPRECATED_STREQ macros using strcmp function.
* symfile.c (symfile_map_offsets_to_segments): Doc fixes.
Assert that we were passed some loaded segment addresses,
and that sections' segment numbers are valid.
Simplify offset calculation.
* remote.c (get_offsets): Clarify selection of relocate-by-segment
strategy, and set num_segments correctly. Delete redundant
assignments to do_sections.
bp_shlib_disabled enumerator.
(struct bp_location): New members shlib_disabled,
global_next, enabled and function_name.
Rename pending to condition_not_parsed.
* breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next.
(ALL_BP_LOCATIONS_SAFE): Likewise.
(breakpoint_enabled): Don't check for pending.
(condition_command): Free and update all locations of
a breakpoint.
(insert_bp_location): Adjust.
(software_breakpoint_inserted_here_p): Don't care
if breakpoint is enabled, as soon as it's inserted.
(print_it_typical): Print bpstat's location, not
bpstat's breakpoint's location.
(bpstat_stop_status): Iterate over all locations, not
all breakpoints.
(print_breakpoint_location): New.
(print_one_breakpoint): Renamed to
(print_one_breakpoint_location): ...this. Take
parameters to describe which location is being
printed. Modify code to properly print header
for several locations and individual locations.
(print_one_breakpoint): Print all locations.
(breakpoint_has_pc): New.
(describe_other_breakpoints): Use the above.
(check_duplicates): Renamed to...
(check_duplicates_for): .. this.
(check_duplicates): Use check_duplicates_for.
(allocate_bp_location): Adjust.
(set_raw_breakpoint_without_location): New,
extracted from set_raw_breakpoint.
(set_breakpoint_location_function): New.
(set_raw_breakpoint): Use
set_raw_breakpoint_without_location.
(make_breakpoint_permanent): Mark all locations
as inserted.
(disable_breakpoints_in_shlibs): Iterate over
locations.
(disable_breakpoints_in_unloaded_shlib): Likewise.
(re_enable_breakpoints_in_shlibs): Likewise.
(mention): Say "pending" when breakpoint has
zero locations. If breakpoint has more than one
location, say so.
(add_location_to_breakpoint): New.
(create_breakpoint): Accept symtabs_and_lines, not
symtab_and_line. Pass extra sals to
add_location_to_breakpoint.
(create_breakpoints): Pass symtabs_and_lines to
create_breakpoints.
(break_command_1): Make pending breakpoints
have zero locations.
(do_captured_breakpoint): Remove wrong allocation.
(clear_command): Iterate over all locations.
(unlink_locations_from_global_list): Renamed
from unlink_location_from_global_list. Remove
all locations.
(delete_breakpoint): Remove all locations.
Iterate over all locations when deciding which
other location to re-enable.
(all_locations_are_pending): New.
(update_breakpoint_locations): Renamed from
update_breakpoint_location. Try to match old
and new locations using names of containing
functions.
(breakpoint_re_set_one): Adjust.
(find_location_by_number): New.
(disable_command): Allow disabling individual location.
(enable_command): Allow enabling individual location.
* breakpoint.c: Adjust all uses of breakpoint's
enable state to for bp_shlib_disabled change.
(resolve_pending_breakpoint): Remove.
(re_enable_breakpoints_in_shlibs): Remove.
(unlink_locations_from_global_list): New.
(update_breakpoint_locations): New.
(breakpoint_re_set_one): Don't bail out on pending breakpoints.
Use parse_condition and update_breakpoint_location to
reset breakpoint. Ignore 'symbol not found' error from
decode_line_1.
(breakpoint_re_set): Don't emit newline before the
reason why breakpoint is not reset.
(do_enable_breakpoint): Don't specially process pending
breakpoints.
(free_bp_location): New.
(break_command_1): For pending breakpoints, initialize
all fields of a sal with zeroes.
* breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
* infcmd.c (post_create_inferior): Don't call
re_enable_breakpoints_in_shlibs.
* infrun.c (handle_inferior_event): Likewise.
* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
create_breakpoints, implementing most of its logic.
Take just a single sal, single address string and
single condition. Do not take parsed condition at
all.
(create_breakpoints): Just call create_breakpoint
for each sal.
(find_condition_and_thread): New.
(break_command_1): Use find_condition_and_thread.
Do not keep parsed conditions.
(do_captured_breakpoint): Don't convert
condition string to struct expression.
* breakpoint.h (breakpoint_at): Change type
to bp_location*.
* breakpoint.c (bpstat_alloc): Take bp_location,
not breakpoint.
(bpstat_find_breakpoint): Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
(bpstat_find_step_resume_breakpoint): Likewise.
(bpstat_num): Likewise.
(print_it_typical): Likewise.
(print_bp_stop_message): Likewise.
(watchpoint_check): Likewise.
(bpstat_what): Likewise.
(bpstat_get_triggered_catchpoints): Likewise.
(breakpoint_auto_delete): Likewise.
(delete_breakpoint): Likewise.
(bpstat_stop_status): Pass location, not breakpoint,
to bpstat_alloc. Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
from an obstack/bcache-managed macro table leaks memory.
* macrotab.c (macro_free, macro_bcache_free): Instead of asserting
that data is never freed in obstack/bcache-managed macro tables,
just leak the storage.
(macro_undef): If we're undefining a macro at exactly the same
source location that we defined it, simply remove the definition
altogether.
* coffread.c, dbxread.c, elfread.c, mipsread.c somread.c:
Adjust the struct sym_fns object accordingly by setting
the new field to NULL.
* xcoffread.c (aix_process_linenos): Make static.
(xcoff_sym_fns): Set new field to aix_process_linenos.
* buildsym.c (end_symtab): Replace call to PROCESS_LINENUMBER_HOOK
by call to new the new sym_fns sym_read_linetable function.
* config/powerpc/aix.mt (DEPRECATED_TM_FILE): Delete.
* config/rs6000/tm-rs6000.h: Delete.
* configure, config.in: Regenerate.
* maint.c (TEXTEND): Only define if either _etext or etext
are available.
Disable the profiling functionality if TEXTEND is not defined.
(inf_ttrace_delete_dying_threads_callback): New function.
(inf_ttrace_resume): After resuming the execution, iterate over
the dying threads to delete them for the thread list.
(inf_ttrace_wait): on TTEVT_LWP_EXIT and TTEVT_LWP_TERMINATE,
mark the corresponding thread as dying instead of removing it
from the thread list.
(inf_ttrace_thread_alive): return 0 for dying threads.
Vladimir Prus
gdbadmin
Jim Blandy
Pierre Muller
Maciej W. Rozycki
Daniel Jacobowitz
Pedro Alves
Joel Brobecker
Jim Wilson
Jerome Guitton