I recently see some gdb.server/*.exp fails in my native gdb testing,
in which libexpat isn't available, so GDB isn't able to parse xml file.
It causes gdb.server/ tests fails because GDB can't get registers
correctly from GDBserver.
(gdb) PASS: gdb.server/connect-without-multi-process.exp: multiprocess=off: break main
target remote localhost:2352^M
Remote debugging using localhost:2352^M
warning: Can not parse XML target description; XML support was disabled at compile time^M
Reading /lib/ld-linux-armhf.so.3 from remote target...^M
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.^M
Reading /lib/ld-linux-armhf.so.3 from remote target...^M
Reading symbols from target:/lib/ld-linux-armhf.so.3...Reading /lib/ld-2.17.so.debug from remote target...^M
Reading /lib/.debug/ld-2.17.so.debug from remote target...^M
(no debugging symbols found)...done.^M
Remote 'g' packet reply is too long: 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000efffbe00000000808d0f4d100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000^
0x4d0f8d80 in _start () from target:/lib/ld-linux-armhf.so.3^M
Without XML support in GDB, it can't parse xml sent by GDBserver, and has
to fall back to the oldest arch. However, GDBserver doesn't know this
(IMO, this is a defect in RSP), and still choose the right target
description to create regcache and 'g' packet. If the port only has
one target description or coincidentally two sides choose the same
target description, there is no such issue. Otherwise, GDB is broken
on read registers.
This patch is to skip gdbserver tests if XML is not support and the
target has multiple target descriptions.
gdb/testsuite:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp (skip_gdbserver_tests): Return 1
if gdb_skip_xml_test is true on some targets.
If I run single test solib-list.exp, it is OK. If I run two, as below,
there are fails,
$ make check RUNTESTFLAGS="server-run.exp solib-list.exp"
FAIL: gdb.server/solib-list.exp: non-stop 0: continue (the program exited)
FAIL: gdb.server/solib-list.exp: non-stop 0: p libvar
FAIL: gdb.server/solib-list.exp: non-stop 1: continue (the program exited)
FAIL: gdb.server/solib-list.exp: non-stop 1: p libvar
in gdb.log,
/scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../../gdb/gdbserver/gdbserver --once :2347 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/server-run/server-run /lib64/ld-linux-x86-64.so.2 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/solib-list/solib-list
server-run is spawned, which is wrong. If I only run solib-list.exp, ld-linux
is spawned, which is right.
/scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../../gdb/gdbserver/gdbserver --once :2346 /lib64/ld-linux-x86-64.so.2 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/solib-list/solib-list
in test, we spawn gdbserver this way,
# Note we pass ${interp_system}, the program gdbserver spawns, as
# argument here, instead of using gdb_load, because we don't want
# to download the interpreter to the target (it's already there)
# or to the test output directory.
set res [gdbserver_spawn "${interp_system} ${remote_binfile}"]
in gdbserver_spawn -> gdbserver_download_current_prog, if
last_loaded_file is set (when you run multiple tests), it is
returned.
This patch is to unset last_loaded_file in solib-list.exp.
gdb/testsuite:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* gdb.server/solib-list.exp: Unset last_loaded_file.
If the last parameter of a tcl function is "args" then it can take
zero or more arguments. Make use of this language feature in
run_ld_link_exec_tests.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Replace
"targets_to_xfail" parameter with "args".
* testsuite/ld-elf/compress.exp: Remove empty list of xfails on
all calls to run_ld_link_exec_tests.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/wrap.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise. Reorder args when providing
xfails and simplify lists.
* testsuite/ld-elf/shared.exp: Likewise.
bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests. Tidy
implib test formatting. Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.
FreeBSD 12 recently added a new ptrace event to indicate when the vfork
parent resumes after the child process stops sharing the address space.
Use this event to report a proper TARGET_WAITKIND_VFORK_DONE rather than
faking a vfork done event after a delay.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
events.
(fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
defined.
(fbsd_add_vfork_done): Likewise.
(fbsd_is_vfork_done_pending): Likewise.
(fbsd_next_vfork_done): Likewise.
(fbsd_resume): Only ignore pending vfork done events if
"PTRACE_VFORK" is not defined.
(fbsd_wait): Only look for pending vfork done events if
"PTRACE_VFORK" is not defined.
[PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
events.
(fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
is not defined.
New child processes on FreeBSD do not inherit optional ptrace events
such as fork and LWP events from the parent process. Instead,
explicitly enable events on new children when reporting a fork
event.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
new child processes.
Add a new function to enable optional event reporting for FreeBSD native
targets. Specifically, use this to enable fork and LWP events.
The bodies of fbsd_enable_follow_fork and fbsd_enable_lwp_events have been
subsumed into the new function. In addition, use the PT_GET_EVENT_MASK
and PT_EVENT_SET_MASK requests added in FreeBSD 12 when present to enable
these events.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
(fbsd_enable_proc_events): New function.
(fbsd_enable_follow_fork): Remove function.
(fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
(fbsd_post_attach): Likewise.
Version 1a adds a pr_pid member containing the process ID of the
terminating process. The presence of pr_pid is inferred from the
note's size.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_psinfo): Check for minimum note size
and handle pr_pid if present.
Issue an error if p_paddr becomes invalid when allocating space for
program headers.
PR ld/20376
* elf.c (assign_file_positions_for_load_sections): Also check
p_paddr for program header space.
tested on Fedora 24 x86_64 after:
./configure; make
That is: CFLAGS='-g -O2' CXXFLAGS='-g -O2'
FAIL: gdb.gdb/selftest.exp: unknown source line
FAIL: gdb.gdb/selftest.exp: step into xmalloc call
gdb/testsuite/ChangeLog
2016-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add "next over TRY" and
"step into captured_main (args)".
$ runtest 'CC_FOR_TARGET=gcc -m32' gdb.btrace/tailcall-only.exp
Running ./gdb.btrace/tailcall-only.exp ...
gdb compile failed, tailcall-only.c: Assembler messages:
tailcall-only.c:142: Error: cannot represent relocation type BFD_RELOC_64
[...]
tailcall-only.c:425: Error: cannot represent relocation type BFD_RELOC_64
It works for the other x86 arch combinations:
On Mon, 11 Apr 2016 08:44:23 +0200, Metzger, Markus T wrote:
I'm setting the target triplet to "i686-unknown-linux" in my m32 configuration.
Like this:
set target_triplet "i686-unknown-linux"
set_board_info cflags "-m32"
set_board_info cppflags "-m32"
On Wed, 20 Jul 2016 16:02:20 +0200, Pedro Alves wrote:
There's no reason you should _not_ set it.
But, multilib-style testing with --target_board=unix\{-m64,-m32\} etc.
should work _too_, IMO.
gdb/testsuite/ChangeLog
2016-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.btrace/tailcall-only.exp: Use is_lp64_target check.
(gdb) source /home/jkratoch/redhat/gdb-clean/gdb/testsuite/outputs/gdb.python/py-unwind/py-unwind.py^M
Python script imported^M
Python Exception <type 'exceptions.ValueError'> Bad register: ^M
(gdb) FAIL: gdb.python/py-unwind.exp: import python scripts
class TestUnwinder(Unwinder):
AMD64_RBP = 6
AMD64_RSP = 7
AMD64_RIP = 16
On Tue, 19 Jul 2016 12:06:09 +0200, Yao Qi wrote:
py-unwind.exp does nothing on arch specific thing, so py-unwind.exp shouldn't
be aware of the arch difference, but py-unwind.py should.
On Tue, 19 Jul 2016 20:04:33 +0200, Pedro Alves wrote:
How about we handle this in the .exp file for now and leave something
more complicated for when the test is first ported to some other
arch. WDYT?
gdb/testsuite/ChangeLog
2016-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-unwind.exp: Test also ![is_lp64_target].
Remove R_MIPS_PC26_S2 and R_MIPS_PC21_S2 relocation references that went
into `mips_force_relocation' with commit 9d862524f6 ("MIPS: Verify the
ISA mode and alignment of branch and jump targets") by mistake. Their
BFD_RELOC_MIPS_26_PCREL_S2 and BFD_RELOC_MIPS_21_PCREL_S2 equivalents
are already handled there.
gas/
* config/tc-mips.c (mips_force_relocation): Remove
R_MIPS_PC26_S2 and R_MIPS_PC21_S2.
Folding a constant expression early can lead to loss of tokens, eg.
ABSOLUTE, that are significant in ld's horrible context sensitive
expression evaluation. Also, MAXPAGESIZE and other "constants" may
not have taken values specified on the command line, leading to the
wrong value being cached.
* ldexp.c (exp_unop, exp_binop, exp_trinop, exp_nameop): Don't
fold expression.
* testsuite/ld-elf/maxpage3b.d: Expect correct maxpagesize.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_PLTREL32>): Put
ppc64_elf_unhandled_reloc for special_function.
* elf32-ppc.c (ppc_elf_howto_raw): Similarly for lots of relocs.
A test recently added to gdb.opt/inline-cmds.exp fails for
arm-none-eabi targets because -O2 leads to instructions to be
reordered widely.
I guess it might have made sense years ago to enable optimization in
these tests, but I fail to see the need for that nowadays.
Using -O0 while relying on __attribute__((always_inline)), which is
already used in the tests [1] [2], avoids this sort of trouble, while
still exercising the inlining-related use cases that are the focus of
these tests.
I think that nowadays we can safely assume that all compilers we care
about support __attribute__((always_inline)) or similar.
[1] - Except one spot that missed it.
[2] - Note that the .exp files make sure the frames that should have
been inlined are indeed inlined, with "info frame".
gdb/testsuite/ChangeLog:
2016-07-19 Pedro Alves <palves@redhat.com>
* gdb.opt/inline-break.exp: Remove optimize=-O2.
* gdb.opt/inline-bt.exp: Likewise.
* gdb.opt/inline-cmds.exp: Remove optimize=-O2 and add
additional_flags=-Winline.
* gdb.opt/inline-locals.exp: Likewise.
* gdb.opt/inline-markers.c (ATTR): Define.
(inlined_fn): Use it.
Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.
gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code. Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.
Also make jump target's alignment verification consistent with that for
branches.
This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only. These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).
Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes. It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations. Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols. Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.
gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc. Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
It can be initialized with values greater than 0x80000000, which don't fit in a
signed int. Further it appears to be used as a set of bit flags where unsigned
int is more typical.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-nds32.c (struct nds32_pseudo_opcode): Make pseudo_val
unsigned int.
(do_pseudo_b): Adjust.
(do_pseudo_bal): Likewise.
(do_pseudo_bge): Likewise.
(do_pseudo_bges): Likewise.
(do_pseudo_bgt): Likewise.
(do_pseudo_bgts): Likewise.
(do_pseudo_ble): Likewise.
(do_pseudo_bles): Likewise.
(do_pseudo_blt): Likewise.
(do_pseudo_blts): Likewise.
(do_pseudo_br): Likewise.
(do_pseudo_bral): Likewise.
(do_pseudo_la): Likewise.
(do_pseudo_li): Likewise.
(do_pseudo_ls_bhw): Likewise.
(do_pseudo_ls_bhwp): Likewise.
(do_pseudo_ls_bhwpc): Likewise.
(do_pseudo_ls_bhwi): Likewise.
(do_pseudo_move): Likewise.
(do_pseudo_neg): Likewise.
(do_pseudo_not): Likewise.
(do_pseudo_pushpopm): Likewise.
(do_pseudo_pushpop): Likewise.
(do_pseudo_v3push): Likewise.
(do_pseudo_v3pop): Likewise.
(do_pseudo_pushpop_stack): Likewise.
(do_pseudo_push_bhwd): Likewise.
(do_pseudo_pop_bhwd): Likewise.
(do_pseudo_pusha): Likewise.
(do_pseudo_pushi): Likewise.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (struct pop_entry): Make the type of reloc
bfd_reloc_code_real_type.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-z8k.c (newfix): Make type of type argument
bfd_reloc_code_real_type.
(apply_fix): Likewise.
This patch uses do_self_tests to simplify selftest.exp. It doesn't
change the tests except the order,
-PASS: gdb.gdb/selftest.exp: Disassemble main
PASS: gdb.gdb/selftest.exp: breakpoint in captured_main
+PASS: gdb.gdb/selftest.exp: run until breakpoint at captured_main
+PASS: gdb.gdb/selftest.exp: Disassemble main
PASS: gdb.gdb/selftest.exp: set interrupt character in test_with_self
PASS: gdb.gdb/selftest.exp: set listsize to 1
-PASS: gdb.gdb/selftest.exp: run until breakpoint at captured_main
gdb/testsuite:
2016-07-19 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/selftest.exp: Remove checks on is_remote and isnative.
(test_with_self): Remove some code. Remove argument executable.
(top-level): Use do_self_tests.
When using the plugin interface to claim an input file the claim method
from (possible) many plugins can be called on an input file. If these
claim methods read content from the input file then the file offset
stored in the underlying file descriptor will change.
As we share a file descriptor between the plugin interface (created with
dup in ld/plugin.c:plugin_object_p) and the input bfd object, then any
changes to the file offset in the file descriptor will effect the bfd
object. Also, as the changes to the file offset did not originate from
calls through the bfd interface, but instead came from the plugin
directly, then the bfd will not be aware that the file offset has
changed. This is a problem as the bfd library caches the file offset.
If the plugin decides not to claim an input file then, currently, we
leave the bfd in a state where the actual file offset is out of sync
with the cached file offset.
This problem came to light after a recent commit
7d0b9ebc1e (Don't include libbfd.h outside
of bfd, part 6) however, I don't believe that commit actual introduces
the bug, it just exposed the existing issue.
This commit solves the problem by backing up and restoring the file
offset for the file descriptor of the input file. The restore is only
done if the plugin does not claim the input file, as it is in this case
that the bfd library might be used again to try and identify the
unclaimed file.
ld/ChangeLog:
* plugin.c (plugin_call_claim_file): Restore the file offset after
an unsuccessful attempt to claim a file.
* testplug.c (bytes_to_read_before_claim): New global.
(record_read_length): New function, sets new global
bytes_to_read_before_claim.
(parse_option): Handle 'read:<NUMBER>' option.
(onclaim_file): Read file content before checking for claim.
* testsuite/ld-plugin/plugin-30.d: New file.
* testsuite/ld-plugin/plugin.exp: Add new test.
PR target/ 19401
* avr/interp.c (step_once): Pass break instruction address to
sim_engine_halt function which writes that to PC. Remove code that
follows that function call as it is unreachable.
Some messing with plugin code in order to not need arelt_size in
ld code. File descriptor handling in ld/plugin.c is tidied too,
simply duping the open fd rather than opening the file again.
bfd/
* elflink.c: Include plugin-api.h.
* plugin.c (bfd_plugin_open_input): New function, extracted from..
(try_claim): ..here.
* plugin.h: Don't include bfd.h.
(bfd_plugin_open_input): Declare.
binutils/
* ar.c: Include plugin-api.h.
* nm.c: Likewise.
ld/
* plugin.c: Don't include libbfd.h. Include plugin-api.h
before bfd/plugin.h.
(plugin_object_p): Use bfd_plugin_open_input.
A rewrite of the code in bucomm.c supporting objdump -i, to use
bfd_iterate_over_targets rather than accessing bfd_target_vector
directly. Calculates widest arch string rather than using an
out of date constant. Stashes info from the first display of valid
target/arch combinations for use in second tabular display.
binutils/
* bucomm.c: Don't include libbfd.h.
(endian_string, display_target_list): Delete forward declaration.
(display_info_table, display_target_tables): Likewise.
(LONGEST_ARCH): Delete.
(struct display_target): New.
(do_display_target): New function.
(display_target_list, display_info): Rewrite functions.
(display_info_table): Delete.
(do_info_size, do_info_header, do_info_row): New functions.
Not much to see here, just renaming a function.
bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this. Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets. Localize vars.
Fix od-macho.c to use a leb128 function from binutils/dwarf.c rather
than one from bfd/libbfd.c.
binutils/
* elfcomm.h (HOST_WIDEST_INT): Move to..
* sysdep.h: ..here.
* od-macho.c: Don't include libbfd.h. Do include dwarf.h
(dump_dyld_info_rebase): Use read_leb128 rather than
read_unsigned_leb128.
(dump_dyld_info_bind, dump_dyld_info_export_1): Likewise.
(dump_segment_split_info): Likewise.
(dump_dyld_info): Rename vars to avoid shadowing dwarf.h enums.
(dump_load_command): Likewise.
This patch fixes problems with a few GDB testsuites when executing in a
path that contains special characters (e.g. "++"). When such paths are
used as a regular expression, the regular expression parser will choke
and cause the tests to fail. This patch uses string_to_regexp to
escape strings that will be used as regular expressions, in order to
sanitize path names used in expect scripts.
2016-07-15 Zachary Welch <zwelch@codesourcery.com>
Don Breazeal <donb@codesourcery.com>
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Escape paths used in regular expressions.
* gdb.stabs/weird.exp: Likewise.
FreeBSD's librt uses SIGLIBRT as an internal signal to implement
SIGEV_THREAD sigevent notifications. Similar to SIGLWP or SIGCANCEL
this signal should be passed through to child processes by default.
include/ChangeLog:
* signals.def: Add GDB_SIGNAL_LIBRT.
gdb/ChangeLog:
* common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
(do_gdb_signal_to_host): Likewise.
* infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
programs.
* proc-events.c (signal_table): Add entry for SIGLIBRT.
bfd * elf32-arc.c (PR_DEBUG): Delete.
Fix printing of debug information. Fix formatting of debug
statements.
(debug_arc_reloc): Handle symbols that are not from an input file.
(arc_do_relocation): Remove excessive exclamation points.
(elf_arc_relocate_section): Print an informative message if the
relocation fails, even if debugging is not enabled.
* arc-got.h: Fix formatting. Fix printing of debug information.
(new_got_entry_to_list): Use xmalloc.
* config.bfd: use the big-endian arc vector as the default vector
for big-endian arc targets.
ld * testsuite/ld-arc/arc.exp: Always run the sda-relocs test in
little endian mode.
Fixes failures on alpha, ia64, mcore, metag, moxie, and pj due to lack
of 16-bit relocs.
* testsuite/binutils-all/remove-relocs-01.s: Use .dc.a, not .word.
Yao Qi
Nick Clifton
Alan Modra
GDB Administrator
John Baldwin
Claudiu Zissulescu
H.J. Lu
Jan Kratochvil
Maciej W. Rozycki
Yan-Ting Lin
Roland McGrath
Pedro Alves
Trevor Saunders
Andrew Burgess
Denis Chertykov
Don Breazeal
Thomas Preud'homme