I recently see the test fails like this,
(gdb) PASS: gdb.gdb/selftest.exp: step over argv initialization
list^M
487 std::vector<struct cmdarg> cmdarg_vec;^M
(gdb) FAIL: gdb.gdb/selftest.exp: unknown source line (after step over argv initialization)
step^M
std::vector<cmdarg, std::allocator<cmdarg> >::vector (this=0x7fffffffdc10) at ../../binutils-gdb/gdb/main.c:487^M
487 std::vector<struct cmdarg> cmdarg_vec;^M
(gdb) FAIL: gdb.gdb/selftest.exp: step into xmalloc call
These fails are caused by using std::vector in commit
f60ee22ea1. selttest.exp should match
the source code of GDB. It is a maintenance pain, so this patch
removes do_steps_and_nexts.
gdb/testsuite:
2016-12-19 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/selftest.exp (do_steps_and_nexts): Remove.
(test_with_self): Don't call do_steps_and_nexts, and remove
code about stepping into xmalloc.
I build GDB with all targets enabled, and "set architecture rx",
GDB crashes,
(gdb) set architecture rx
Program received signal SIGSEGV, Segmentation fault.
append_flags_type_flag (type=0x20cc360, bitpos=bitpos@entry=0, name=name@entry=0xd27529 "C") at ../../binutils-gdb/gdb/gdbtypes.c:4926
4926 name);
(gdb) bt 10
#0 append_flags_type_flag (type=0x20cc360, bitpos=bitpos@entry=0, name=name@entry=0xd27529 "C") at ../../binutils-gdb/gdb/gdbtypes.c:4926
#1 0x00000000004ce725 in rx_gdbarch_init (info=..., arches=<optimized out>) at ../../binutils-gdb/gdb/rx-tdep.c:1051
#2 0x00000000006b05a4 in gdbarch_find_by_info (info=...) at ../../binutils-gdb/gdb/gdbarch.c:5269
#3 0x000000000060eee4 in gdbarch_update_p (info=...) at ../../binutils-gdb/gdb/arch-utils.c:557
#4 0x000000000060f8a8 in set_architecture (ignore_args=<optimized out>, from_tty=1, c=<optimized out>) at ../../binutils-gdb/gdb/arch-utils.c:531
#5 0x0000000000593d0b in do_set_command (arg=<optimized out>, arg@entry=0x20bee81 "rx ", from_tty=from_tty@entry=1, c=c@entry=0x20b1540)
at ../../binutils-gdb/gdb/cli/cli-setshow.c:455
#6 0x00000000007665c3 in execute_command (p=<optimized out>, p@entry=0x20bee70 "set architecture rx ", from_tty=1) at ../../binutils-gdb/gdb/top.c:666
#7 0x00000000006935f4 in command_handler (command=0x20bee70 "set architecture rx ") at ../../binutils-gdb/gdb/event-top.c:577
#8 0x00000000006938d8 in command_line_handler (rl=<optimized out>) at ../../binutils-gdb/gdb/event-top.c:767
#9 0x0000000000692c2c in gdb_rl_callback_handler (rl=0x20be7f0 "") at ../../binutils-gdb/gdb/event-top.c:200
The cause is that we want to access some builtin types in gdbarch init, but
it is not initialized yet. I fix it by creating the type when it is to be
used. We've already done this in sparc, sparc64 and m68k.
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20954
* rx-tdep.c (rx_psw_type): New function.
(rx_fpsw_type): New function.
(rx_register_type): Call rx_psw_type and rx_fpsw_type.
(rx_gdbarch_init): Move code to rx_psw_type and
rx_fpsw_type.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in: Remove kfail for "rx".
I build GDB for all targets enabled. When I "set architecture rl78",
GDB crashes,
(gdb) set architecture rl78
Program received signal SIGSEGV, Segmentation fault.
append_flags_type_flag (type=0x20cc0e0, bitpos=bitpos@entry=0, name=name@entry=0x11dba3f "CY") at ../../binutils-gdb/gdb/gdbtypes.c:4926
4926 name);
(gdb) bt 10
#0 append_flags_type_flag (type=0x20cc0e0, bitpos=bitpos@entry=0, name=name@entry=0x11dba3f "CY") at ../../binutils-gdb/gdb/gdbtypes.c:4926
#1 0x00000000004aaca8 in rl78_gdbarch_init (info=..., arches=<optimized out>) at ../../binutils-gdb/gdb/rl78-tdep.c:1410
#2 0x00000000006b05a4 in gdbarch_find_by_info (info=...) at ../../binutils-gdb/gdb/gdbarch.c:5269
#3 0x000000000060eee4 in gdbarch_update_p (info=...) at ../../binutils-gdb/gdb/arch-utils.c:557
#4 0x000000000060f8a8 in set_architecture (ignore_args=<optimized out>, from_tty=1, c=<optimized out>) at ../../binutils-gdb/gdb/arch-utils.c:531
#5 0x0000000000593d0b in do_set_command (arg=<optimized out>, arg@entry=0x20be851 "rl78", from_tty=from_tty@entry=1, c=c@entry=0x20b1540)
at ../../binutils-gdb/gdb/cli/cli-setshow.c:455
#6 0x00000000007665c3 in execute_command (p=<optimized out>, p@entry=0x20be840 "set architecture rl78", from_tty=1) at ../../binutils-gdb/gdb/top.c:666
#7 0x00000000006935f4 in command_handler (command=0x20be840 "set architecture rl78") at ../../binutils-gdb/gdb/event-top.c:577
#8 0x00000000006938d8 in command_line_handler (rl=<optimized out>) at ../../binutils-gdb/gdb/event-top.c:767
#9 0x0000000000692c2c in gdb_rl_callback_handler (rl=0x20be890 "") at ../../binutils-gdb/gdb/event-top.c:200
The cause is that we want to access some builtin types in gdbarch init, but
it is not initialized yet. I fix it by creating the type when it is to be
used. We've already done this in sparc, sparc64 and m68k.
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20953
* rl78-tdep.c (rl78_psw_type): New function.
(rl78_register_type): Call rl78_psw_type.
(rl78_gdbarch_init): Move code to rl78_psw_type.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in: Remove kfail for rl78.
This adds a test that exposes several problems fixed by earlier
patches:
#1 - Buffer overrun when host/target formats match, but sizes don't.
https://sourceware.org/ml/gdb-patches/2016-03/msg00125.html#2 - Missing handling for FR-V FR300.
https://sourceware.org/ml/gdb-patches/2016-03/msg00117.html#3 - BFD architectures with spaces in their names (v850).
https://sourceware.org/ml/binutils/2016-03/msg00108.html#4 - The OS ABI names with spaces issue.
https://sourceware.org/ml/gdb-patches/2016-03/msg00116.html#5 - Bogus HP/PA long double format.
https://sourceware.org/ml/gdb-patches/2016-03/msg00122.html#6 - Cris big endian internal error.
https://sourceware.org/ml/gdb-patches/2016-03/msg00126.html#7 - Several PowerPC bfd archs/machines not handled by gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=19797
And hopefully helps catch others in the future.
This started out as a test that simply did,
gdb -ex "print 1.0L"
to exercise #1 above.
Then to cover both 32-bit target / 64-bit host and the converse, I
thought of having the testcase print the floats twice, once with the
architecture set to "i386" and then to "i386:x86-64". This way it
wouldn't matter whether gdb was built as 32-bit or a 64-bit program.
Then I thought that other archs might have similar host/target
floatformat conversion issues as well. Instead of hardcoding some
architectures in the test file, I thought we could just iterate over
all bfd architectures and OS ABIs supported by the gdb build being
tested. This is what then exposed all the other problems listed
above...
With an --enable-targets=all, this exercises over 14 thousand
combinations. If left in a single test file, it all consistenly runs
in under a minute on my machine (An Intel i7-4810MQ @ 2.8 MHZ running
Fedora 23). Split in 8 chunks, as in this commit, it runs in around
25 seconds, with make -j8.
To avoid flooding the gdb.sum file, it avoids calling "pass" on each
tested combination/iteration. I'm explicitly not implementing that by
passing an empty message to gdb_test / gdb_test_multiple, because I
still want a FAIL to be logged in gdb.sum. So instead this puts the
internal passes in the gdb.log file, only, prefixed "IPASS:", for
internal pass. TBC, if some iteration fails, it'll still show up as
FAIL in gdb.sum. If this is an approach that takes on, I can see us
extending the common bits to support it for all testcases.
gdb/testsuite/ChangeLog:
2016-12-09 Pedro Alves <palves@redhat.com>
* gdb.base/all-architectures-0.exp: New file.
* gdb.base/all-architectures-1.exp: New file.
* gdb.base/all-architectures-2.exp: New file.
* gdb.base/all-architectures-3.exp: New file.
* gdb.base/all-architectures-4.exp: New file.
* gdb.base/all-architectures-5.exp: New file.
* gdb.base/all-architectures-6.exp: New file.
* gdb.base/all-architectures-7.exp: New file.
* gdb.base/all-architectures.exp.in: New file.
gdb.perf/skip-prologue.exp is intended to measure the performance of
skipping prologue with prologue analysis by setting breakpoints.
However, if program is compiled with debug info, GDB is smart to
skip prologue by line table from debug info, so prologue analysis
is not exercised at all.
This patch adds a parameter COMPILE to specify compiling with
debug information, otherwise, it is compiled without debug
information.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.perf/skip-prologue.exp: Add parameter COMPILE.
This gets rid of more useless pattern matching cases in gdb.base/maint.exp.
gdb/testsuite/ChangeLog:
2016-12-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/maint.exp: Use gdb_test instead of gdb_test_multiple when
possible.
Remove useless pattern-matching code.
New in v2:
- A few adjustments / simplifications were possible now that we
require C++11:
. Use std::unique_ptr to make the user_args_stack std::vector own
its elements:
static std::vector<std::unique_ptr<user_args>> user_args_stack;
. use vector::emplace_back to construct elements directly in the
corresponding vectors.
. use std::to_string instead of adding a gdb::to_string
replacement.
- Now includes a test.
Docs/NEWS are unchanged from v1 and have already been approved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I recently wrote a user-defined command that could benefit from
supporting an unlimited number of arguments:
http://palves.net/list-active-signal-handlers-with-gdb/
E.g., 'info signal-dispositions 1 2 3 4 5 6 7 8 9 10 11'
However, we currently only support up to 10 arguments passed to
user-defined commands ($arg0..$arg9).
I can't find a good reason for that, other than "old code with hard
coded limits". This patch removes that limit and modernizes the code
along the way:
- Makes the user_args struct a real C++ class that uses std::vector
for storage.
- Removes the "next" pointer from within user_args and uses a
std::vector to maintain a stack instead.
- Adds a new RAII-based scoped_user_args_level class to help
push/pop user args in the stack instead of using a cleanup.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* NEWS: Mention that user commands now accept an unlimited number
of arguments.
* cli/cli-script.c: Include <vector>.
(struct string_view): New type.
(MAXUSERARGS): Delete.
(struct user_args): Now a C++ class.
(user_args_stack): New.
(struct scoped_user_args_level): New type.
(execute_user_command): Use scoped_user_args_level.
(arg_cleanup): Delete.
(setup_user_args): Deleted, and refactored as ...
(user_args::user_args): ... this new constructor. Limit of number
of arguments removed.
(insert_user_defined_cmd_args): Defer to user_args_stack.
(user_args::insert_args): New, bits based on old
insert_user_defined_cmd_args with limit of number of arguments
eliminated.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (User-defined Commands): Limit on number of
arguments passed to user-defined commands removed; update.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (user_defined_command_manyargs_test): New
procedure.
(top level): Call it.
We're missing a test that makes sure that arguments to user-defined
commands are handled correctly when a user-defined command calls
another user-defined command / recurses.
The following patch changes that code, so add such a test first so we
can be confident won't be breaking this use case.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (user_defined_command_args_stack_test):
New procedure.
(top level): Call it.
It'd be handy to be able to iterate over command arguments in
user-defined commands, in order to support optional arguments
($arg0..$argN).
I thought I could make it work with "eval", but alas, it doesn't work
currently. E.g., with:
define test
set $i = 0
while $i < $argc
eval "print $arg%d", $i
set $i = $i + 1
end
end
we get:
(gdb) test 1
$1 = void
(gdb) test 1 2 3
$2 = void
$3 = void
$4 = void
(gdb)
The problem is that "eval" doesn't do user-defined command arguments
substitution after expanding its own argument. This patch fixes that,
which makes the example above work:
(gdb) test 1
$1 = 1
(gdb) test 1 2 3
$2 = 1
$3 = 2
$4 = 3
(gdb)
New test included, similar the above, but also exercises expanding
$argc.
I think this is likely to simplify many scripts out there, so I'm
adding an example to the manual and mentioning it in NEWS as well.
gdb/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* NEWS: Mention "eval" expands user-defined command arguments.
* cli/cli-script.c (execute_control_command): Adjust to rename.
(insert_args): Rename to ...
(insert_user_defined_cmd_args): ... this, and make extern.
* cli/cli-script.h (insert_user_defined_cmd_args): New
declaration.
* printcmd.c: Include "cli/cli-script.h".
(eval_command): Call insert_user_defined_cmd_args.
gdb/doc/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.texinfo (Define): Add example of using "eval" to process a
variable number of arguments.
(Output) <eval>: Add anchor.
gdb/testsuite/ChangeLog:
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* gdb.base/commands.exp (user_defined_command_args_eval): New
procedure.
(top level): Call it.
This reverts the timeout handling (removed by
018572b888) for gdb.cp/ovldbreak.exp until we
decide what to do about this particular function.
gdb/testsuite/ChangeLog:
2016-12-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/ovldbreak.exp (take_gdb_out_of_choice_menu): Restore
timeout handling.
This patch adds support for DW_AT_main_subprogram.
This is PR symtab/16264.
DW_AT_main_subprogram is used to mark a program's entry point. GCC
can emit this, and I hope to change the Rust compiler to emit it as
well.
GDB already supports an older, pre-DWARF 4 convention adopted by
FORTRAN compilers, namely to emit DW_AT_calling_convention for the
"main" function. However, I think this support in GDB had a small
bug, in that it seems to rely on the DW_AT_name being read before
DW_AT_calling_convention. This patch fixes this as well.
Built and regtested on x86-64 Fedora 24 and the buildbot. New test
case included.
2016-12-02 Tom Tromey <tom@tromey.com>
PR symtab/16264:
* dwarf2read.c (struct partial_die_info) <main_subprogram>: New
member.
(add_partial_symbol): Call set_objfile_main_name.
(read_partial_die): Handle DW_AT_main_subprogram.
<DW_AT_calling_convention>: don't call set_objfile_main_name, but
set main_subprogram flag.
2016-12-02 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/main-subprogram.c: New file.
* gdb.dwarf2/main-subprogram.exp: New file.
This fixes a few cases where the testcase is explicitly handling timeouts
inside gdb_test_multiple when it is not necessary.
It also converts two gdb_test_multiple calls to gdb_test_no_output calls
(also removing the timeout handling).
gdb/testsuite/ChangeLog:
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/maint.exp: Remove timeout handling for gdb_test_multiple.
* gdb.cp/gdb2495.exp: Likewise and convert gdb_test_multiple into
gdb_test_no_output for a couple of cases.
* gdb.cp/ovldbreak.exp: Remove timeout handling for gdb_test_multiple.
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_multiple in a multi-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
* gdb.cp/gdb2495.exp: Replace gdb_test_multiple
with gdb_test_no_output.
Use command as test name.
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_no_output in a multi-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
Fix test names starting with uppercase throughout the files.
* gdb.ada/assign_1.exp
* gdb.ada/boolean_expr.exp
* gdb.base/arrayidx.exp
* gdb.base/del.exp
* gdb.base/gcore-buffer-overflow.exp
* gdb.base/testenv.exp
* gdb.compile/compile.exp
* gdb.python/py-framefilter-invalidarg.exp
* gdb.python/py-framefilter.exp
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_multiple in a single-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
Fix test names starting with uppercase throughout the files.
* gdb.arch/i386-bp_permanent.exp
* gdb.arch/i386-gnu-cfi.exp
* gdb.base/disasm-end-cu.exp
* gdb.base/macscp.exp
* gdb.base/pending.exp
* gdb.base/watch_thread_num.exp
* gdb.cp/exception.exp
* gdb.cp/gdb2495.exp
* gdb.cp/local.exp
* gdb.python/py-evsignal.exp
* gdb.python/python.exp
* gdb.trace/tracecmd.exp
Since we don't use suffix rules nor implicit rules in gdb, we can
disable them. The advantage is a slightly faster make [1].
Here are some numbers about the speedup. I ran this on my trusty old
Intel Q6600, so the time numbers are probably higher than what you'd get
on any recent hardware. I ran "make" in the gdb/ directory of an
already built repository (configured with --enable-targets=all). I
recorded the time of execution (average of 5). I then ran "make -d" and
recorded the number of printed lines, which gives a rough idea of the
number of operations done.
I compared the following configurations, to see the impact of both the
empty .SUFFIXES target and the empty pattern rules, as well as running
"make -r", which can be considered the "ideal" case.
A - baseline
B - baseline + .SUFFIXES
C - baseline + pattern rules
D - baseline + .SUFFIXES + pattern rules
E - baseline + make -r
config | time (s) | "make -d"
-----------------------------
A | 5.74 | 2396643
B | 1.19 | 298469
C | 2.81 | 1266573
D | 1.13 | 245489
E | 1.01 | 163914
We can see that the empty .SUFFIXES target has a bigger impact than the
empty pattern rules, but still it doesn't hurt to disable the implicit
pattern rules as well.
There are still some mentions of implicit rules I can't get rid of in
the "make -d" output. For example, it's trying to build .c files from
.w files:
Looking for an implicit rule for '/home/simark/src/binutils-gdb/gdb/infrun.c'.
Trying pattern rule with stem 'infrun'.
Trying implicit prerequisite '/home/simark/src/binutils-gdb/gdb/infrun.w'.
and trying to build Makefile.in from a bunch of extensions:
Looking for an implicit rule for 'Makefile.in'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.o'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.c'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.cc'.
... many more ...
If somebody knows how to disable them, we can do it, but at this point
the returns are minimal, so it is not that important.
I verified that both in-tree and out-of-tree builds work.
[1] Switching from explicit rules to pattern rules for files in
subdirectories actually made it slower, so this is kind of a way to
redeem myself. But it the end it's faster than it was previously,
so it was all worth it. :)
gdb/ChangeLog:
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/ChangeLog:
* Makefile.in: Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
gdb/testsuite/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
When the user writes or reads a variable whose location is described
with DWARF pieces (DW_OP_piece or DW_OP_bit_piece), GDB's helper
function copy_bitwise is invoked for each piece. The implementation of
this function has a bug that may result in a corrupted copy, depending
on alignment and bit size. (Full-byte copies are not affected.)
This rewrites copy_bitwise, replacing its algorithm by a fixed version,
and adding an appropriate test case. Without the fix the new test case
fails, e.g.:
print def_t
$2 = {a = 0, b = 4177919}
(gdb) FAIL: gdb.dwarf2/nonvar-access.exp: print def_t
Written in binary, the wrong result above looks like this:
01111111011111111111111
Which means that two zero bits have sneaked into the copy of the
original all-one bit pattern. The test uses this simple all-one value
in order to avoid another GDB bug that causes the DWARF piece of a
DW_OP_stack_value to be taken from the wrong end on big-endian
architectures.
gdb/ChangeLog:
* dwarf2loc.c (extract_bits_primitive): Remove.
(extract_bits): Remove.
(copy_bitwise): Rewrite. Fixes a possible corruption that may
occur for non-byte-aligned copies.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/nonvar-access.exp: Add a test for accessing
non-byte-aligned bit fields.
The DW_AT_data_bit_offset attribute was introduced by DWARF V4 and
allows specifying the offset of a data member within its containing
entity. But although the new attribute was intended to replace
DW_AT_bit_offset for this purpose, GDB ignores it, and thus GCC still
emits DW_AT_bit_offset instead. See also
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71669.
This change fixes GDB's lack of support for DW_AT_data_bit_offset and
adds an appropriate test case.
gdb/ChangeLog:
PR gdb/12616
* dwarf2read.c (dwarf2_add_field): Handle the DWARF V4 attribute
DW_AT_data_bit_offset.
gdb/testsuite/ChangeLog:
PR gdb/12616
* gdb.dwarf2/nonvar-access.exp: New testcase. Check that GDB
respects the DW_AT_data_bit_offset attribute.
I find the big file lists in the Makefiles a bit ugly and not very
practical. Since there are multiple filenames on each line (as much as
fits in 80 columns), it's not easy to add, remove or change a name in
the middle. As a result, we have a mix of long and short lines in no
particular order (ALL_TARGET_OBS is a good example).
I therefore suggest flattening the lists (one name per line) and keeping
them in alphabetical order. The diffs will be much clearer and merge
conflicts will be easier to resolve.
A nice (IMO) side-effect I observed is that the files are compiled
alphabetically by make, so it gives a rough idea of the progress of the
build.
I added a comment in gdb/Makefile.in to mention to keep the file lists
ordered, and gave the general guidelines on what order to respect. I
added a comment in other Makefiles which refers to gdb/Makefile.in, to
avoid duplication.
Running the patch through the buildbot found that gdb.base/default.exp
started to fail. The languages in the error message shown when typing
"set language" have changed order. We could probably improve gdb so
that it prints them in a stable order, regardless of the order of the
object list passed to the linked, but just fixing the test is easier for
now.
New in v2:
- Change ordering style, directories go at the end.
- Cleanup gdbserver's and data-directory's Makefile as well.
- Add comments at top of Makefiles about the ordering.
- Remove wrong trailing backslahes.
- Fix test gdb.base/default.exp.
gdb/ChangeLog:
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES, OBS): Flatten list and order
alphabetically.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Fix output of "set language".
Since GNU make is now required to build GDB, we can remove everything
that checks whether the current make implemention is the GNU one or
not. I simply removed the @GMAKE_TRUE@ prefixes and removed the whole
lines that were prefixed with @GMAKE_FALSE@.
I removed the code in the configure scripts that set those variables.
I also removed the following bits from the configure scripts:
AC_CHECK_PROGS(MAKE, make): GNU make already defines a MAKE variable
internally to be used when invoking Makefiles recursively. I don't see
this variable being used anywhere else (in scripts for example), so I
think it's safe for removal.
AC_PROG_MAKE_SET: This macro defines a SET_MAKE output variable, which
is meant to be used in Makefiles to define the MAKE variable when
using an implementation of make that doesn't already define it.
Since we are now requiring GNU make, we don't need it anymore.
Plus, I don't see SET_MAKE being used anywhere, so I don't think it
was actually doing anything...
gdb/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/testsuite/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
This patch modifies the unwinder (sniffer) defined in
py-recurse-unwind.py so that, depending upon the value of one of its
class variables, it will take different paths through the code,
testing different functionality.
The original test attempted to obtain the value of an undefined
symbol.
This somewhat expanded test checks to see if 'pc' can be read via
gdb.PendingFrame.read_register() and also via gdb.parse_and_eval().
gdb/testsuite/ChangeLog:
* gdb.python/py-recurse-unwind.c (main): Add loop.
* gdb.python/py-recurse-unwind.py (TestUnwinder): Add calls
to read_register() and gdb.parse_and_eval(). Make each code
call a separate case that can be individually tested.
* gdb.python/py-recurse-unwind.exp (cont_and_backtrace): New
proc. Call cont_and_backtrace for each of the code paths that
we want to test in the unwinder.
The "struct S" type in bitfield-parent-optimized-out.exp is declared to
have a size of 4 bytes but to hold two 4-byte members: an int-based
bitfield and a 4-byte int. Also, both members have the same
data_member_location 2, causing them to overlap and to reach 2 bytes
beyond the structure's boundary.
This is fixed by increasing the structure size to 8 and setting the
first and second member's data_member_location to 0 and 4, respectively.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/bitfield-parent-optimized-out.exp: Fix DWARF code for
the definition of struct S.
- Use multi_line for matching multi-line GDB output.
- Add a multi_line_input variant of multi_line to build GDB input and
use it throughout.
(The two changes above make the tests much more readable, IMO.)
- Add a new valnum_re global to get rid of the multiple "\\\$\[0-9\]*".
- Remove gdb_stop_suppressing_tests uses.
- tighten a few regexps.
- Replace send_gdb/gdb_expect with gdb_test_multiple and simplify,
making pass/fail messages the same.
gdb/ChangeLog:
2016-11-09 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (runto_or_return): New procedure.
(gdbvar_simple_if_test, gdbvar_simple_while_test)
(gdbvar_complex_if_while_test, progvar_simple_if_test)
(progvar_simple_while_test, progvar_complex_if_while_test)
(if_while_breakpoint_command_test)
(infrun_breakpoint_command_test, breakpoint_command_test)
(user_defined_command_test, watchpoint_command_test)
(test_command_prompt_position, redefine_hook_test)
(stray_arg0_test, error_clears_commands_left, redefine_hook_test)
(redefine_backtrace_test): Use runto_or_return, $valnum_re,
multi_line_input and multi_line. Remove gdb_expect and
gdb_stop_suppressing_tests uses.
* lib/gdb.exp (valnum_re): New global.
* lib/gdb.exp (valnum_re): New global.
(multi_line_input): New procedure.
Pedro's patch provides a cleaner way to prefix tests with the proc name,
so let's use that.
gdb/testsuite/ChangeLog:
* gdb.mi/user-selected-context-sync.exp (with_test_prefix_procname):
Remove.
(test_setup): Define with proc_with_prefix.
(test_cli_inferior): Likewise.
(test_cli_thread): Likewise.
(test_cli_frame): Likewise.
(test_cli_select_frame): Likewise.
(test_cli_up_down): Likewise.
(test_mi_thread_select): Likewise.
(test_mi_stack_select_frame): Likewise.
(test_cli_in_mi_inferior): Likewise.
(test_cli_in_mi_thread): Likewise.
(test_cli_in_mi_frame): Likewise.
(top level): Do not use with_test_prefix_procname.
While adding new tests to gdb.base/commands.exp, I noticed that the
file includes a bunch of individual testcases split into their own
procedures, and that none have ever been adjusted to use
with_test_prefix. Instead, each gdb_test/gdb_test_multiple/etc
invocation takes care of including the procedure name in the test
message, in order to make sure test messages are unique.
Simon convinced me that using the procedure name as prefix is not that
bad of an idea:
https://sourceware.org/ml/gdb-patches/2016-10/msg00020.html
This commit adds an IMO simpler alternative to
with_test_prefix_procname added by that patch -- a new
"proc_with_prefix" convenience proc that is meant to be used in place
of "proc", and then uses it in commands.exp. Procedures defined with
this automatically run their bodies under with_test_prefix $proc_name.
Here's a sample of the resulting gdb.sum diff:
[...]
-PASS: gdb.base/commands.exp: break factorial #3
-PASS: gdb.base/commands.exp: set value to 5 in test_command_prompt_position
-PASS: gdb.base/commands.exp: if test in test_command_prompt_position
-PASS: gdb.base/commands.exp: > OK in test_command_prompt_position
+PASS: gdb.base/commands.exp: test_command_prompt_position: break factorial
+PASS: gdb.base/commands.exp: test_command_prompt_position: set value to 5
+PASS: gdb.base/commands.exp: test_command_prompt_position: if test
+PASS: gdb.base/commands.exp: test_command_prompt_position: > OK
[...]
gdb/testsuite/ChangeLog:
2016-11-09 Pedro Alves <palves@redhat.com>
* gdb.base/commands.exp (gdbvar_simple_if_test)
(gdbvar_simple_while_test, gdbvar_complex_if_while_test)
(progvar_simple_if_test, progvar_simple_while_test)
(progvar_complex_if_while_test, if_while_breakpoint_command_test)
(infrun_breakpoint_command_test, breakpoint_command_test)
(user_defined_command_test, watchpoint_command_test)
(test_command_prompt_position, deprecated_command_test)
(bp_deleted_in_command, temporary_breakpoint_commands)
(stray_arg0_test, source_file_with_indented_comment)
(recursive_source_test, if_commands_test)
(error_clears_commands_left, redefine_hook_test)
(redefine_backtrace_test): Use proc_with_prefix.
* lib/gdb.exp (proc_with_prefix): New proc.
A user reported a GDB crash with TUI when trying to debug a function
with a long demangled C++ method name. It turned out that the logic for
displaying the TUI disassembly window has a bug that can cause a buffer
overrun, possibly overwriting GDB-internal data structures. In
particular, the logic performs an unguarded strcpy.
Another (harmless) bug in tui_alloc_source_buffer causes the buffer to
be two lines longer than needed. This may have made the crash appear
less frequently.
gdb/ChangeLog:
* tui/tui-disasm.c (tui_set_disassem_content): Fix line buffer
overrun due to unchecked strcpy.
gdb/testsuite/ChangeLog:
* gdb.base/tui-layout.c: New file.
* gdb.base/tui-layout.exp: Use tui-layout.c, to ensure that the
disassembly window contains very long lines.
I happened to notice that one test in py-value.exp did not work
properly with Python 3. This patch fixes the problem.
2016-11-08 Tom Tromey <tom@tromey.com>
* gdb.python/py-value.exp (test_value_creation): Make "long" test
depend on Python 2.
While writing a Python frame filter, I found a few bugs in the current
frame filter code. In particular:
* One spot converts a Python long to a CORE_ADDR using PyLong_AsLong.
However, this can fail on overflow. I changed this to use
get_addr_from_python.
* Another spot is doing the same but with PyLong_AsUnsignedLongLong; I
changed this as well just for consistency.
* Converting line numbers can print "-1" if conversion from long
fails. This isn't fatal but just a bit ugly.
I've included a test case for the first issue. The line number one
didn't seem important enough to bother with.
2016-11-08 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Use
get_addr_from_python. Check for errors when getting line number.
2016-11-08 Tom Tromey <tom@tromey.com>
* gdb.python/py-framefilter.py (ElidingFrameDecorator.address):
New method.
2016-10-27 Manish Goregaokar <manish@mozilla.com>
gdb/ChangeLog:
* rust-lang.c (rust_get_disr_info): Treat univariant enums
without discriminants as encoded enums with a real field
* rust-lang.c (rust_evaluate_subexp): Handle field access
on encoded struct-like enums
gdb/testsuite/ChangeLog:
* simple.rs: Add test for univariant enums without discriminants
and for encoded struct-like enums
* simple.exp: Add test expectations
Fixes:
PASS: gdb.base/maint.exp: maint w/o args
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/maint.exp: maint info line-table w/o a file name
The problem is just many symtabs and long line tables, enough to
overflow the expect buffer. Fix this by matching input incrementally.
gdb/testsuite/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* gdb.base/maint.exp <maint info line-table w/o a file name>: Use
gdb_test_multiple, tighten regexps and match symtabs and line
tables incrementally.
Testing a powerpc toolchain running gdbserver on the other end i noticed a
failure in gdb.base/foll-exec.exp. Turns out gdb is outputting a slightly
different pattern due to the presence of debug information.
--
foll-exec is about to execlp(execd-prog)...^M
Continuing.^M
process 21222 is executing new program: gdb.d/outputs/gdb.base/foll-exec/execd-prog^M
^M
Catchpoint 2 (exec'd gdb.d/outputs/gdb.base/foll-exec/execd-prog), _start () at ../sysdeps/powerpc/powerpc32/dl-start.S:32^M
--
Notice the presence of source file information.
Now, on my local machine, i get this:
--
foll-exec is about to execlp(execd-prog)...^M
Continuing.^M
process 9285 is executing new program: gdb/testsuite/outputs/gdb.base/foll-exec/execd-prog^M
^M
Catchpoint 2 (exec'd gdb/testsuite/outputs/gdb.base/foll-exec/execd-prog), 0x00007ffff7dd7cc0 in ?? () from /lib64/ld-linux-x86-64.so.2^M
--
So the output differs slightly and the testcase is actually expecting only
the second form with the "in" anchor.
This patch removes the "in" pattern and lets the test match both kinds of
output.
gdb/testsuite/ChangeLog:
2016-10-28 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/foll-exec.exp (do_exec_tests): Make test pattern more
general.
The following testcases make GDB crash whenever an invalid sysroot is
provided, when GDB is unable to find a valid path to the symbol file:
gdb.base/catch-syscall.exp
gdb.base/execl-update-breakpoints.exp
gdb.base/foll-exec-mode.exp
gdb.base/foll-exec.exp
gdb.base/foll-vfork.exp
gdb.base/pie-execl.exp
gdb.multi/bkpt-multi-exec.exp
gdb.python/py-finish-breakpoint.exp
gdb.threads/execl.exp
gdb.threads/non-ldr-exc-1.exp
gdb.threads/non-ldr-exc-2.exp
gdb.threads/non-ldr-exc-3.exp
gdb.threads/non-ldr-exc-4.exp
gdb.threads/thread-execl.exp
The immediate cause of the segv is that follow_exec is passing a NULL
argument (the result of exec_file_find) to strlen.
However, the problem is deeper than that: follow_exec simply isn't
prepared for the case where sysroot translation fails to locate the
new executable. Actually all callers of exec_file_find have bugs due
to confusion between host and target pathnames. This commit attempts
to fix all that.
In terms of the testcases that were formerly segv'ing, GDB now prints
a warning but continues execution of the new program, so that the
tests now mostly FAIL instead. You could argue the FAILs are due to a
legitimate problem with the test environment setting up the sysroot
translation incorrectly.
A new representative test is added which exercises the ne wwarning
code path even with native testing.
Tested on x86_64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2016-10-25 Sandra Loosemore <sandra@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR gdb/20569
* exceptions.c (exception_print_same): Moved here from exec.c.
* exceptions.h (exception_print_same): Declare.
* exec.h: Include "symfile-add-flags.h".
(try_open_exec_file): New declaration.
* exec.c (exception_print_same): Moved to exceptions.c.
(try_open_exec_file): New function.
(exec_file_locate_attach): Rename exec_file and full_exec_path
variables to avoid confusion between target and host pathnames.
Move pathname processing logic to exec_file_find. Do not return
early if pathname lookup fails; Call try_open_exec_file.
* infrun.c (follow_exec): Split and rename execd_pathname variable
to avoid confusion between target and host pathnames. Warn if
pathname lookup fails. Pass target pathname to
target_follow_exec, not hostpathname. Call try_open_exec_file.
* main.c (symbol_file_add_main_adapter): New function.
(captured_main_1): Use it.
* solib-svr4.c (open_symbol_file_object): Adjust to pass
symfile_add_flags to symbol_file_add_main.
* solib.c (exec_file_find): Incorporate fallback logic for relative
pathnames formerly in exec_file_locate_attach.
* symfile.c (symbol_file_add_main, symbol_file_add_main_1):
Replace 'from_tty' parameter with a symfile_add_file.
(symbol_file_command): Adjust to pass symfile_add_flags to
symbol_file_add_main.
* symfile.h (symbol_file_add_main): Replace 'from_tty' parameter
with a symfile_add_file.
gdb/testsuite/ChangeLog:
2016-10-25 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/exec-invalid-sysroot.exp: New file.
Since
[commit] [testsuite patch] Fix gcc_compiled for gcc 6 & 7
https://sourceware.org/ml/gdb-patches/2016-10/msg00620.html
there has started running again
Running gdb/testsuite/gdb.base/morestack.exp ...
+FAIL: gdb.base/morestack.exp: continue
+PASS: gdb.base/morestack.exp: up 3000
but as you can see it FAILs now - on Fedora 24 x86_64 (although for example it
still PASSes on CentOS-7.2 x86_64).
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff787c7bb in malloc_consolidate (av=av@entry=0x7ffff7bbcb00 <main_arena>) at malloc.c:4181
4181 unlink(av, nextchunk, bck, fwd);
(gdb) bt
[...]
[...]
This apparently is due to - man gcc - -fsplit-stack:
When code compiled with -fsplit-stack calls code compiled without
-fsplit-stack, there may not be much stack space available for the
latter code to run. If compiling all code, including library code,
with -fsplit-stack is not an option, then the linker can fix up these
calls so that the code compiled without -fsplit-stack always has
a large stack. Support for this is implemented in the gold linker in
GNU binutils release 2.21 and later.
gdb/testsuite/ChangeLog
2016-10-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/morestack.exp: Try to build it using -fuse-ld=gold first.
Fix a commit 4a556533cf ("Fix PR11094: JIT breakpoint is not properly
recreated on reruns") regression:
Running .../gdb/testsuite/gdb.base/killed-outside.exp ...
Executing on host: mips-mti-linux-gnu-gcc -Wl,--no-as-needed -c -g -o .../gdb/testsuite/outputs/gdb.base/killed-outside/killed-outside0.o .../gdb/testsuite/gdb.base/killed-outside.c .../gdb/testsuite/outputs/gdb.base/jit-simple/jit-simple-jit.so (timeout = 300)
spawn mips-mti-linux-gnu-gcc -Wl,--no-as-needed -c -g -o .../gdb/testsuite/outputs/gdb.base/killed-outside/killed-outside0.o .../gdb/testsuite/gdb.base/killed-outside.c .../gdb/testsuite/outputs/gdb.base/jit-simple/jit-simple-jit.so
mips-mti-linux-gnu-gcc: warning: .../gdb/testsuite/outputs/gdb.base/jit-simple/jit-simple-jit.so: linker input file unused because linking not done
output is:
mips-mti-linux-gnu-gcc: warning: .../gdb/testsuite/outputs/gdb.base/jit-simple/jit-simple-jit.so: linker input file unused because linking not done
gdb compile failed, mips-mti-linux-gnu-gcc: warning: .../gdb/testsuite/outputs/gdb.base/jit-simple/jit-simple-jit.so: linker input file unused because linking not done
UNTESTED: gdb.base/killed-outside.exp: failed to prepare
and adjust the call to `prepare_for_testing' by removing a reference to
`options', which is not set in this test case but a stale value is
carried over from `gdb.base/jit-simple.exp' previously executed in a
full test suite run.
gdb/testsuite/
* gdb.base/killed-outside.exp: Remove $options from a call to
`prepare_for_testing'.
This fixes a comment I forgot to update in the previous patch.
gdb/testsuite/ChangeLog:
* gdb.trace/mi-trace-save.exp (test_trace_save_wrong_num_args):
Update comment.
-trace-save doesn't check whether an argument is passed, leading to a
segfault if you pass nothing.
I added a small test, which only tests the error conditions of
-trace-save.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_trace_save): Check if argument is present
before using it.
gdb/testsuite/ChangeLog:
* gdb.trace/mi-trace-save.exp: New file.
This patch skips some tests related to floating point in structs.exp
if gdb_skip_float_test return false.
gdb/testsuite:
2016-10-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/structs.exp: Invoke gdb_skip_float_test, and do
floating point tests if $skip_float_test is false.
Doug Evans
Yao Qi
Pedro Alves
Luis Machado
Tom Tromey
Simon Marchi
Andreas Arnez
Kevin Buettner
Catherine Moore
Manish Goregaokar
Sandra Loosemore
Jan Kratochvil
Maciej W. Rozycki
Simon Marchi