* config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Set to tm-alpha.h.
* config/alpha/tm-alphalinux.h: Delete file.
* config/arm/linux.mt (DEPRECATED_TM_FILE): Set to tm-arm.h
* config/arm/tm-linux.h: Delete file.
* config/i386/tm-linux.h: Do not include "config/tm-linux.h".
* config/ia64/tm-linux.h: Do not include "config/tm-linux.h".
* config/m32r/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/mips/tm-linux.h: Do not include "config/tm-linux.h".
* config/pa/linux.mt (DEPRECATED_TM_FILE): Set to tm-hppa.h.
* config/pa/tm-linux.h: Delete file.
* config/powerpc/tm-linux.h: Do not include "config/tm-linux.h".
* config/s390/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/sh/linux.mt (DEPRECATED_TM_FILE): Set to tm-sh.h.
* config/sh/tm-linux.h: Delete file.
* alpha-linux-tdep.c: Include "symtab.h".
(alpha_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* i386-linux-tdep.c: Include "symtab.h".
(i386_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* ia64-linux-tdep.c: Include "symtab.h".
(ia64_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* m32r-linux-tdep.c: Include "symtab.h".
(m32r_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* mips-linux-tdep.c: Include "symtab.h".
(mips_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* sh-linux-tdep.c: Include "symtab.h".
(sh_linux_init_abi): Call set_gdbarch_skip_trampoline_code.
* s390-tdep.c (s390_gdbarch_init): Call
set_gdbarch_skip_trampoline_code.
* s390-nat.c: Do not include "tm.h".
* Makefile.in (alpha-linux-tdep.o): Add dependency on $(symtab_h).
(i386-linux-tdep.o): Likewise.
(ia64-linux-tdep.o): Likewise.
(m32r-linux-tdep.o): Likewise.
(mips-linux-tdep.o): Likewise.
(sh-linux-tdep.o): Likewise.
(s390-nat.o): Remove dependency on $(tm_h).
* config/vax/nm-obsd.h: Delete file.
* config/vax/obsd.mh (NAT_FILE): Set to config/nm-bsd.h.
* config/vax/nm-nbsd.h: Delete file.
* config/vax/nm-nbsdaout.h: Include config/nm-nbsd.h.
* config/vax/nbsdelf.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/sh/nm-nbsd.h: Delete file.
* config/sh/nbsd.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/rs6000/nm-rs6000ly.h: Delete file.
* config/djgpp/fnchange.lst: Do not rename nm-rs6000ly.h.
* config/rs6000/rs6000lynx.mh (NAT_FILE): Set to config/nm-lynx.h.
* config/powerpc/nm-obsd.h: Delete file.
* config/powerpc/obsd.mh (NAT_FILE): Set to config/nm-bsd.h.
* config/powerpc/nm-nbsd.h: Delete file.
* config/powerpc/nbsd.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/pa/nm-obsd.h: Delete file.
* config/pa/obsd.mh (NAT_FILE): Set to config/nm-bsd.h.
* config/mips/nm-nbsd.h: Delete file.
* config/mips/nbsd.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/m88k/nm-obsd.h: Delete file.
* config/m88k/obsd.mh (NAT_FILE): Set to config/nm-bsd.h.
* config/m68k/nm-nbsd.h: Delete file.
* config/m68k/nm-nbsdaout.h: Include config/nm-nbsd.h.
* config/m68k/nbsdelf.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/i386/nm-nbsd.h: Delete file.
* config/i386/nm-nbsdaout.h: Include config/nm-nbsd.h.
* config/i386/obsd64.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/i386/nbsd64.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/i386/nbsdelf.mh (NAT_FILE): Set to config/nm-nbsd.h.
* config/i386/nm-i386lynx.h: Delete file.
* config/i386/i386lynx.mh (NAT_FILE): Set to config/nm-lynx.h.
* config/arm/nm-nbsd.h: Delete file.
* config/arm/nm-nbsdaout.h: Include config/nm-nbsd.h.
* config/arm/nbsdelf.mh (NAT_FILE): Set to config/nm-nbsd.h.
(sh64-tdep.o): Add dependencies.
* configure.tgt: Add FIXME to sh-*-linux*.
* sh-tdep.c: Move sh64 support to sh64-tdep.c.
(sh_gdbarch_init): Always set correct sh_show_regs function
pointer. Call sh64_gdbarch_init() if machine type is sh5.
* sh-tdep.h: Move sh64 support to sh64-tdep.c.
* sh64-tdep.c: New file, containing all sh64 related code from
sh-tdep.c.
* config/sh/embed.mt (TDEPFILES): Add sh64-tdep.o.
* config/sh/linux.mt (TDEPFILES): Ditto.
* config/sh/nbsd.mt (TDEPFILES): Ditto.
* config/sh/tm-sh.h: Drop REGISTER_TYPE definition.
* config/sh/wince.mt (TDEPFILES): Ditto.
* configure.host: Set gdb_host_cpu to sh for all sh*.
(sh*-*-netbsdelf*): New host.
* configure.tgt: Set gdb_target_cpu to sh for all sh*.
(sh*-*-netbsdelf*): New target.
* sh-nbsd-nat.c: New file.
* sh-nbsd-tdep.c: New file.
* sh-nbsd-tdep.h: New file.
* config/sh/nbsd.mh: New file.
* config/sh/nbsd.mt: New file.
* config/sh/nm-nbsd.h: New file.
* config/sh/tm-nbsd.h: New file.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM fields.
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): SR_REGNUM is
now part of gdbarch_tdep structure.
(sh_gdbarch_init): Initialize SR_REGNUM.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add field SR_REGNUM.
* config/sh/tm-sh.h (struct gdbarch_tdep): Rename fields
{FP15,DR14,FV12}_REGNUM to {FP,DR,FV}_LAST_REGNUM.
* sh-tdep.c (sh_sh3e_register_virtual_type,
sh_sh4_register_virtual_type, sh_do_registers_info,
sh_gdbarch_init, sh_sh4_register_byte, sh_sh4_register_raw_size,
sh_sh4_register_convertible, sh_sh4_register_convert_to_virtual,
sh_sh4_register_convert_to_raw, sh_fetch_pseudo_register,
sh_store_pseudo_register, sh_do_pseudo_register): Ditto.
* sh-tdep.c (sh_gdbarch_init): Use a function pointer to set the
disassembly print function.
(_initialize_sh_tdep): Initialize tm_print_insn using the function
pointer.
* config/sh/tm-sh.h (struct gdbarch_tdep): Get rid of
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM, they are not used
anywhere.
* sh-tdep.c (sh_gdbarch_init): Don't initialize
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM.
* config/sh/tm-linux.h: New file. Include generic tm-linux.h,
plus tm-sh.h, then define SVR4_FETCH_LINK_MAP_OFFSETS to use
the sh target function instead of the default link map offsets.
* config/sh/sh.mt: Add solib.o and solib-svr4.o to TDEPFILES.
Use sh/tm-linux.h instead of sh/tm-sh.h.
* sh-tdep.c (sh_linux_svr4_fetch_link_map_offsets):
New function. Construct target-specific link map offsets.
* i386-linux-tdep.c (i386_linux_svr4_fetch_link_map_offsets:
New function. Construct target-specific link map offsets.
* config/i386/tm-linux.h: Use above function instead of default.
2000-10-30 Michael Snyder <msnyder@cleaver.cygnus.com>
* config/i386/tm-linux.h: Remove definition of SVR4_SHARED_LIBS,
and inclusion of solib.h. Move up into ../tm-linux.h.
config/tm-linux.h: Define SVR4_SHARED_LIBS, include solib.h.
* sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
sh_fetch_pseudo_register, sh_store_pseudo_register,
sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
they should be numbered as drx fvy where x and y are multiples of
2 and 4 respectively.
* config/sh/tm-sh.h: Fix names of pseudo regs.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
pseudo registers.
(DO_REGISTERS_INFO): Define.
* sh-tdep.c (sh_sh4_register_name): New function.
(sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
signature.
(sh_show_regs_command): New function. Actual function called by
the 'regs' command.
(sh_register_byte): Rename to...
(sh_default_register_byte): ...New function.
(sh_sh4_register_byte): New function.
(sh_register_raw_size): Rename to...
(sh_default_register_raw_size): ...New function.
(sh_sh4_register_raw_size): New function.
(sh_sh4_register_virtual_type): New function.
(sh_sh4_build_float_register_type): New function.
(sh_fetch_pseudo_register, sh_store_pseudo_register): New
functions.
(fv_reg_base_num, dr_reg_base_num): New functions.
(do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
sh_do_fp_register, sh_do_register, sh_print_register,
sh_do_registers_info): New functions.
(sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
architecture specific parts.
(_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.
* config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
sh_store_return_value().
* sh-tdep.c (sh_store_return_value): New function. Store the
value returned by a function into the appropriate register.
2000-07-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_skip_prologue): Before looking at the actual
instructions, try to see if the symbol table can be of help, by
calling after_prologue(). If this doesn't work, call
skip_prologue_hard_way().
(skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
more instruction pattern matching for pushing of arguments, and
manipulation of r14.
(after_prologue): New function. Use symbol table info to determine
the end of the prologue, if possible.
