Correct a MIPS16 relocation handling regression in GAS introduced with:
commit 177b4a6ad0
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Mon Mar 18 18:56:18 2002 +0000
discussed at <https://sourceware.org/ml/binutils/2002-03/msg00345.html>,
which removed a preparatory call to `mips16_extended_frag' previously
made from `md_estimate_size_before_relax'. As a result the function is
never called with its `sec' parameter non-NULL and consequently all the
unsupported relocation checks within are dead and never trigger, causing
any unhandled relocations to silently resolve to 0. Unfortunately there
was no sufficient test suite coverage back then to catch this.
Remove all dead code then, and all the associated comments. Update the
remaining call to `mips16_extended_frag' from `mips_relax_frag' to pass
the relocation section as the `sec' parameter and use it to mark frags
which require an external relocation, as extended. Finally handle any
outstanding MIPS16 relocations in `md_convert_frag' and report an error
since we don't support any except with percent operators.
gas/
* config/tc-mips.c (append_insn): Use any `O_symbol' expression
unchanged with relaxed MIPS16 instructions.
(mips16_extended_frag): Adjust accordingly. Return 1 right
away if a relocation will be required for the symbol requested.
Remove dead first relaxation pass code.
(mips_relax_frag): Pass `sec' down to `mips16_extended_frag'.
(md_convert_frag): Adjust symbol value calculation. Raise an
error if a relocation is required for the symbol requested.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove dump patterns,
add error output.
* testsuite/gas/mips/mips16@relax-swap3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-0.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-1.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-2.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-3.d: New test.
* testsuite/gas/mips/mips16-branch-addend-0.d: New test.
* testsuite/gas/mips/mips16-branch-addend-1.d: New test.
* testsuite/gas/mips/mips16-branch-addend-2.d: New test.
* testsuite/gas/mips/mips16-branch-addend-3.d: New test.
* testsuite/gas/mips/mips16-branch-absolute.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-0.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-1.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-2.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-absolute.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-2.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-3.l: New error output.
* testsuite/gas/mips/mips16-branch-absolute.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-relax-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-0.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-1.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-2.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-3.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
All platforms on FreeBSD use a shared system call table, so use a
single XML file to describe the system calls available on each FreeBSD
platform.
Recent versions of FreeBSD include the identifier of the current
system call when reporting a system call entry or exit event in the
ptrace_lwpinfo structure obtained via PT_LWPINFO in fbsd_wait. As
such, FreeBSD native targets do not use the gdbarch method to fetch
the system call code. In addition, FreeBSD register sets fetched via
ptrace do not include an equivalent of 'orig_rax' (on amd64 for
example), so the system call code cannot be extracted from the
available registers during a system call exit. However, GDB assumes
that system call catch points are not supported if the gdbarch method
is not present. As a workaround, FreeBSD ABIs install a dummy gdbarch
method that throws an internal_error if it is ever invoked.
gdb/ChangeLog:
* configure.ac: Check for support for system call LWP fields on
FreeBSD.
* config.in, configure: Rebuild.
* data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
* fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Report system call events.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
(fbsd_set_syscall_catchpoint): New function.
(fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
* fbsd-tdep.c: Include xml-syscall.h
(fbsd_get_syscall_number): New function.
(fbsd_init_abi): Set XML system call file name.
Add "get_syscall_number" gdbarch method.
* syscalls/freebsd.xml: New file.
Add a 'print_auxv_entry' method for FreeBSD ABIs that parses
FreeBSD-specific auxiliary vector entries and outputs a suitable
description using fprint_auxv_entry.
gdb/ChangeLog:
* fbsd-tdep.c: Include "auxv.h".
(fbsd_print_auxv_entry): New function.
(fbsd_init_abi): Install gdbarch "print_auxv_entry" method.
Different platforms have different meanings for auxiliary vector
entries. The 'print_auxv_entry' gdbarch method allows an architecture
to output a suitable description for platform-specific entries.
A fprint_auxv_entry function is split out of fprint_target_auxv.
This function outputs the description of a single auxiliary vector
entry to the specified file using caller-supplied formatting and
strings to describe the vector type.
The existing switch on auxiliary vector types is moved out of
fprint_target_auxv into a new default_print_auxv_entry function.
default_print_auxv_entry chooses an appropriate format and description
and calls fprint_single_auxv to describe a single vector entry.
This function is used as the default 'print_auxv_entry' gdbarch method.
fprint_target_auxv now invokes the gdbarch 'print_auxv_entry' method
on each vector entry.
gdb/ChangeLog:
* auxv.c (fprint_auxv_entry): New function.
(default_print_auxv_entry): New function.
(fprint_target_auxv): Use gdbarch_print_auxv_entry.
* auxv.h (enum auxv_format): New enum.
(fprint_auxv_entry): Declare.
(default_print_auxv_entry): Declare.
* gdbarch.sh (print_auxv_entry): New.
* gdbarch.c, gdbarch.h: Re-generated.
The procstat AUXV core dump note in FreeBSD consists of 32-bit integer
followed by an array of auxiliary vector entries.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_note): Handle NT_FREEBSD_PROCSTAT_AUXV
notes.
Use the kern.proc.auxv.<pid> sysctl to fetch the ELF auxiliary vector for
a live process.
gdb/ChangeLog:
* fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
(fbsd_xfer_partial): New function.
(fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
"fbsd_xfer_partial".
Move parsing of FreeBSD-specific ELF core notes out of elfcore_grok_note
into a new elfcore_grok_freebsd_note function. Add core note grok routines
for FreeBSD's psinfo and prstatus notes while here rather than depending
on the native handling in elfcore_grok_note.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Remove handling of NT_X86_XSTATE for
FreeBSD. Remove case for NT_FREEBSD_THRMISC.
(elfcore_grok_freebsd_psinfo): New function.
(elfcore_grok_freebsd_prstatus): New function.
(elfcore_grok_freebsd_note): New function.
(elf_parse_notes): Use "elfcore_grok_freebsd_note" for "FreeBSD"
notes.
When configured with the default options, GDB currently fails to link,
due to an undefined reference to bfd_link_plugin_object_p, coming from
elflink.c:
#ifdef BFD_SUPPORTS_PLUGINS
|| (abfd->plugin_format == bfd_plugin_unknown
&& bfd_link_plugin_object_p (abfd))
#endif
This is because BFD_SUPPORTS_PLUGINS is always defined. It is its value
that determines whether plugin support is enabled or not.
bfd/ChangeLog:
* elflink.c: Check the value of BFD_SUPPORTS_PLUGINS rather
than its existance.
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets. When renaming sections, the
named section symbol needs to be renamed too.
Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab. It
turns out to be useful in readelf.exp too.
bfd/
* config.bfd: Delete mips vxworks patterns matched earlier.
Combine mips*-*-none with mips*-*-elf*.
binutils/
* objcopy.c (find_section_rename): Forward declare. Remove
ibfd and sec_ptr param. Add old_name param. Allow for NULL
returned_flags. Move read of section name and flags to..
(setup_section): ..here. Update find_section_rename call.
(filter_symbols): Rename section symbols for renamed sections.
(copy_object): Call filter_symbols when renamed sections.
* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
* testsuite/binutils-all/update-section.exp: Revert 96037eb0
mips xfail.
* testsuite/binutils-all/objcopy.exp (copy_executable): Use
is_bad_symtab.
(localize-hidden-1): xfail if is_bad_symtab.
* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
between mips/tmips.
Showing context lines is confusing in many cases, an obvious example
being loops.
* objdump.c (struct print_file_list): Add "max_printed".
(try_print_file_open): Init new field.
(show_line): Don't show 5 context lines when redisplaying source.
This patch moves most of the demangling logic out of
symbol_find_demangled_name into the various language_defn objects.
The simplest way to do this seemed to be to add a new method to
language_defn. This is shame given the existing la_demangle, but
given Ada's unusual needs, and the differing demangling options
between languages, la_demangle didn't seem to fit.
In order to make this work, I made enum language order-sensitive.
This helps preserve the current ordering of demangling operations.
2016-06-23 Tom Tromey <tom@tromey.com>
* symtab.c (symbol_find_demangled_name): Loop over languages and
use language_sniff_from_mangled_name.
* rust-lang.c (rust_sniff_from_mangled_name): New function.
(rust_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_sniff_from_mangled_name): New function.
(objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_sniff_from_mangled_name>: New
field.
(language_sniff_from_mangled_name): Declare.
* language.c (language_sniff_from_mangled_name): New function.
(unknown_language_defn, auto_language_defn, local_language_defn):
Update.
* jv-lang.c (java_sniff_from_mangled_name): New function.
(java_language_defn): Use it.
* go-lang.c (go_sniff_from_mangled_name): New function.
(go_language_defn): Use it.
* f-lang.c (f_language_defn): Update.
* defs.h (enum language): Reorder.
* d-lang.c (d_sniff_from_mangled_name): New function.
(d_language_defn): Use it.
* cp-support.h (gdb_sniff_from_mangled_name): Declare.
* cp-support.c (gdb_sniff_from_mangled_name): New function.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_sniff_from_mangled_name): New function.
(ada_language_defn): Use it.
This moves filename extensions from a function in symfile.c out to
each language_defn. I think this is an improvement because it means
less digging around when writing a new language port.
2016-06-23 Tom Tromey <tom@tromey.com>
* ada-lang.c (ada_extensions): New array.
(ada_language_defn): Use it.
* c-lang.c (c_extensions): New array.
(c_language_defn): Use it.
(cplus_extensions): New array.
(cplus_language_defn): Use it.
(asm_extensions): New array.
(asm_language_defn): Use it.
(minimal_language_defn): Update.
* d-lang.c (d_extensions): New array.
(d_language_defn): Use it.
* f-lang.c (f_extensions): New array.
(f_language_defn): Use it.
* go-lang.c (go_language_defn): Update.
* jv-lang.c (java_extensions): New array.
(java_language_defn): Use it.
* language.c (add_language): Call add_filename_language.
(unknown_language_defn, auto_language_defn, local_language_defn):
Update.
* language.h (struct language_defn) <la_filename_extensions>: New
field.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_extensions): New array.
(objc_language_defn): Use it.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (p_extensions): New array.
(pascal_language_defn): Use it.
* rust-lang.c (rust_extensions): New array.
(rust_language_defn): Use it.
* symfile.c (add_filename_language): No longer static. Make "ext"
const.
(init_filename_language_table): Remove.
(_initialize_symfile): Update.
* symfile.h (add_filename_language): Declare.
This patch changes filename_language_table to be a VEC. This seemed
like a reasonable cleanup over the old code.
2016-06-23 Tom Tromey <tom@tromey.com>
* symfile.c (filename_language_table): Now a VEC.
(fl_table_size, fl_table_next): Remove.
(add_filename_language): Use VEC_safe_push.
(set_ext_lang_command, info_ext_lang_command)
(deduce_language_from_filename): Use VEC_iterate.
(init_filename_language_table): Use VEC_empty.
While working on the next patch in this series, I noticed that
gdbpy_parameter did not need to be exported. This makes it "static".
2016-06-23 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_parameter): Now static.
* python/python-internal.h (gdbpy_parameter): Don't declare.
The fix for PR 15370 did not correctly check all patterns in a group,
but instead threw all unassigned sections into the group. This patch
fixes that.
2016-06-23 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
gold/
PR gold/15370
* script-sections.cc
(Output_section_element_input::set_section_addresses): Keep bin_count
separate from input_pattern_count.
* testsuite/script_test_12.t: Add another section .x4.
* testsuite/script_test_12i.t: Likewise.
* testsuite/script_test_12a.c: Likewise.
* testsuite/script_test_12b.c: Likewise.
PR gdb/16483 notes that the output of "info frame-filters" is quite
voluminous. In particular it prints an entry for each objfile, even if
only to say that the objfile does not have any associated frame filters.
I think it's better to only print output when there is a frame filter.
There's nothing worth doing with the no-frame-filter information, and
limiting the output makes it much more readable.
Built and regtested on x86-64 Fedora 23.
2016-06-23 Tom Tromey <tom@tromey.com>
PR gdb/16483:
* python/lib/gdb/command/frame_filters.py
(InfoFrameFilter.list_frame_filters): Rename to print_list. Print
nothing if no filters found. Return value indicating whether
filters were printed.
(InfoFrameFilter.print_list): Remove.
(InfoFrameFilter.invoke): Print message if no frame filters
found.
2016-06-23 Tom Tromey <tom@tromey.com>
PR gdb/16483:
* gdb.python/py-framefilter.exp: Add "info frame-filter" test
before any filters are loaded.
Keep original microMIPS symbols in references from branch relocations so
that the ISA bit is retained and can be verified for validity in static
link. No need to update WRT MIPS16 symbols because we keep them all
anyway for other reasons.
gas/
* config/tc-mips.c (b_reloc_p): New function.
(mips_fix_adjustable): Also keep the original microMIPS symbol
referred from branch relocations.
* testsuite/gas/mips/branch-local-1.d: New test.
* testsuite/gas/mips/branch-local-n32-1.d: New test.
* testsuite/gas/mips/branch-local-n64-1.d: New test.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Update
relocations.
* testsuite/gas/mips/branch-local-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new cases.
The code supporting -mspfp, -mdpfp, and -mfpuda options are in
sections of code that are commented as being for backward
compatibility only, and having no effect. However, they do have an
effect, enabling the SPX, DPX, and DPA instruction subclasses
respectively. This commit moves the code supporting these options
away from the comments indicating that they are dummy options, and
also fixes a small issue where -mnps400 had the additional effect
of enabling SPX instructions.
A couple of other minor edits (that make no functional change) are
also included.
gas/ChangeLog:
* config/tc-arc.c (options, md_longopts, md_parse_option):
Move -mspfp, -mdpfp and -mfpuda out of the sections for
dummy options. Correct erroneous enabling of SPFP
instructions when using -mnps400.
include/ChangeLog:
* opcode/arc.h: Make insn_class_t alphabetical again.
opcodes/ChangeLog:
* arc-opc.c: Correct description of availability of NPS400
features.
* testsuite/binutils-all/ar.exp: Skip tests for Alpha target.
Skip bfdtest1 tests for tic30 target.
* testsuite/binutils-all/arm/objdump.exp: Skip for aout arm
target.
* testsuite/binutils-all/compress.exp: Expect some tests to fail
on the nds32.
* testsuite/binutils-all/copy-3.d: Skip for go32 targets.
* testsuite/binutils-all/copy-4.d: Skip for AIX and linuxecoff
targets.
* testsuite/binutils-all/nm.exp: Treat beos based targets as ELF
targets.
* testsuite/binutils-all/objcopy.exp: Only run reverse bytes tests
if the bintest.o file was created. Use the
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/objdump.exp: Update regexps to allow for
RX section names.
* testsuite/binutils-all/readelf.exp: Use
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/readelf.r: Allow for non standard text
section names.
* testsuite/binutils-all/readelf.s: Update regexps for tilepro.
* testsuite/binutils-all/size.exp: Allow for non standard section
names.
* testsuite/binutils-all/update-section.exp: Expect comapre 1vs4
to fail on mips targets.
* testsuite/lib/utils-lib.exp (default_binutils_run): Use
get_standard_section_names proc.
(run_dump_test): Likewise.
(proc get_standard_section_names): New proc.
Add a configure option --enable-relro to decide whether -z relro should
be enabled by default. Default to yes.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro and default
to 1.
* config.in: Regenerated.
* configure: Likewise.
* options.h (General_options::relro): Default to
DEFAULT_LD_Z_RELRO.
Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets, except FRV, HPPA, IA64 and MIPS, since many relro tests fail
on these targets.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro.
* configure.tgt (ac_default_ld_z_relro): Default it to 1 for
some Linux targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.relro to DEFAULT_LD_Z_RELRO.
* testsuite/config/default.exp (ld_elf_shared_opt): New.
* testsuite/lib/ld-lib.exp (run_dump_test): Pass
$ld_elf_shared_opt to ld for ELF targets with shared object
support.
(run_ld_link_tests): Likewise.
Its closely related to what the encodings are, more than a set of random
constants, so it seems to make sense to put it here.
include/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/tilegx.h: Move TILEGX_NUM_PIPELINE_ENCODINGS into
tilegx_pipeline.
There's no reason to define these macros twice.
gas/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c: Include elf/xtensa.h.
Complement commit 7361da2c95 ("Add support for MIPS R6.") and fix
internal errors like:
foo.s: Assembler messages:
foo.s: Internal error!
Assertion failure in md_apply_fix at .../gas/config/tc-mips.c:15028.
Please report this bug.
triggered by resolved R6 PC-relative relocations in sources containing
R6 code fragments wrapped into ISA override blocks embedded within code
otherwise assembled for an older ISA.
gas/
* config/tc-mips.c (calculate_reloc) <BFD_RELOC_HI16_S_PCREL>
<BFD_RELOC_LO16_PCREL>: New switch cases.
(md_apply_fix) <BFD_RELOC_HI16_S_PCREL, BFD_RELOC_LO16_PCREL>:
Move switch cases along `BFD_RELOC_MIPS_JMP'.
<BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2>
<BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2>: Handle
the resolved case.
* testsuite/gas/mips/pcrel-reloc-4.d: New test.
* testsuite/gas/mips/pcrel-reloc-4-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-5.d: New test.
* testsuite/gas/mips/pcrel-reloc-5-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.l: New list test.
* testsuite/gas/mips/pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Avoid segmentation faults in alignment checks made in `md_apply_fix' for
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2 relocations
caused by dereferencing `fixP->fx_addsy' which will be null if the
relocation processed has been fully resolved.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS_18_PCREL_S3>
<BFD_RELOC_MIPS_19_PCREL_S2>: Avoid null pointer dereferences
via `fixP->fx_addsy'.
The PC-relative R_MIPS_PC18_S3 relocation and consequently its BFD
internal BFD_RELOC_MIPS_18_PCREL_S3 representation is calculated from
the address of the aligned doubleword containing the location being
relocated: (sign_extend(A) + S - (P & ~0x7)) >> 3 rather than the
address of the location itself. Reflect this in calculations made by
GAS so that the relocated field is set correctly if resolved by GAS,
such as with local symbols in the same section which do not require
relocations to be propagated to the link stage.
gas/
* config/tc-mips.c (md_pcrel_from) <BFD_RELOC_MIPS_18_PCREL_S3>:
Calculate relocation from the containing aligned doubleword.
(tc_gen_reloc) <BFD_RELOC_MIPS_18_PCREL_S3>: Calculate the
addend from the containing aligned doubleword.
Use the module level ISA setting rather than the last ISA selected with
a `.set' directive in the source file in determination as to whether to
keep PC-relative relocations and then with the original symbol referred,
for the purpose of R6 linker relaxation.
This is so that with e.g. code like this:
b foo
.set mips32r2
...
it's the command line options or any `.module' directive that decides
how to encode any relocation for `foo' rather than the presence of `.set
mips32r2'.
gas/
* config/tc-mips.c (mips_force_relocation): Use `file_mips_opts'
rather than `mips_opts' for the R6 ISA check.
(mips_fix_adjustable): Likewise.
* testsuite/gas/mips/pcrel-reloc-1.d: New test.
* testsuite/gas/mips/pcrel-reloc-1-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-2.d: New test.
* testsuite/gas/mips/pcrel-reloc-2-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-3.d: New test.
* testsuite/gas/mips/pcrel-reloc-3-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
As with commit ed53407eec ("MIPS/BFD: Don't stop processing on
`bfd_reloc_outofrange'") don't bail out right away and instead continue
processing on a cross-mode jump conversion error, so that any further
issues are also reported. Adjust message formatting accordingly, using
`%X' to abort processing at conclusion. Remove the full stop from the
end of the message, for consistency across error reporting.
Adjust the corresponding test case accordingly and make it trigger the
error twice.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Call
`info->callbacks->einfo' rather than `*_bfd_error_handler' and
use the `%X%H' format for the cross-mode jump conversion error
message. Remove the full stop from the end of the message.
Continue processing rather than returning failure.
ld/
* testsuite/ld-mips-elf/mode-change-error-1a.s: Trigger an error
twice rather than once.
* testsuite/ld-mips-elf/mode-change-error-1.d: Adjust
accordingly. Remove the full stop from the end of the message.
Output for Fortran derived classes is like:
"( 9, 'abc')"
with this changes the output is changed to:
"( lucky_number = 9, letters = 'abc')"
2016-06-21 Walfred Tedeschi <walfred.tedeschi@intel.com>
* f-valprint.c (f_val_print): Add field names for printing
derived types fields.
gdb/testsuite:
* gdb.fortran/derived-type.exp (print q): Add fields to the output.
* gdb.fortran/vla-type.exp (print twov): Fix vla tests with
structs.
* gdb.fortran/derived-type-function.exp: New file.
* gdb.fortran/derived-type-function.f90: New file.
This fixes a typo in the name of the "last-break" regset.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
in name of last-break regset.
This adds a test that uses new-ui to create a secondary console, and
then runs some basic smoke tests. It ensures that:
- synchronous commands send output to the UI that initiated it
- asynchronous events like breakpoint hits are reported on all
consoles.
- "new-ui" without arguments doesn't crash.
- The "new-ui" command doesn't repeat.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.base/new-ui.exp: New file.
* lib/mi-support.exp (switch_gdb_spawn_id): Move to ...
* lib/gdb.exp (switch_gdb_spawn_id): ... here.
(with_spawn_id): New procedure.
Maciej W. Rozycki
David Taylor
John Baldwin
Joel Brobecker
Alan Modra
H.J. Lu
Tom Tromey
GDB Administrator
Cary Coutant
Igor Kudrin
Graham Markall
Peter Bergner
Trevor Saunders
Nick Clifton
Walfred Tedeschi
Andreas Arnez
Pedro Alves