It will be used when one wants to convert between the internal GDB signal
representation (enum gdb_signal) and the target's representation.
The idea of this patch came from a chat between Pedro and I on IRC, plus
the discussion of my patches to add the new $_exitsignal convenience
variable:
<http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html>
<http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html>
What I did was to investigate, on the Linux kernel, which targets shared
the signal numbers definition with the generic definition, present at
<include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7
as the main source of information, always looking at
<arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults
to _NSIG in most cases), I had to look at different signal-related
files, but most of them (except MIPS) were defined to 64 anyway.
Then, with all the differences in hand, I implemented the bits on each
target.
2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com>
* linux-tdep.c: Define enum with generic signal numbers.
(linux_gdb_signal_from_target): New function.
(linux_gdb_signal_to_target): Likewise.
(linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
methods to the functions above.
* linux-tdep.h (linux_gdb_signal_from_target): New prototype.
(linux_gdb_signal_to_target): Likewise.
* alpha-linux-tdep.c: Define new enum with signals different
from generic Linux kernel.
(alpha_linux_gdb_signal_from_target): New function.
(alpha_linux_gdb_signal_to_target): Likewise.
(alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
with the functions mentioned above.
* avr-tdep.c: Define enum with differences between Linux kernel
and AVR signals.
(avr_linux_gdb_signal_from_target): New function.
(avr_linux_gdb_signal_to_target): Likewise.
(avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to
the functions mentioned above.
* sparc-linux-tdep.c: Define enum with differences between SPARC
and generic Linux kernel signal numbers.
(sparc32_linux_gdb_signal_from_target): New function.
(sparc32_linux_gdb_signal_to_target): Likewise.
(sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
to the functions defined above.
* xtensa-linux-tdep.c: Define enum with differences between
Xtensa and Linux kernel generic signals.
(xtensa_linux_gdb_signal_from_target): New function.
(xtensa_linux_gdb_signal_to_target): Likewise.
(xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target
to the functions defined above.
* mips-linux-tdep.c: Define enum with differences between
signals in MIPS and Linux kernel generic ones.
(mips_gdb_signal_to_target): New function.
(mips_gdb_signal_from_target): Redefine to use new enum, handle
only different signals from the Linux kernel generic.
(mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
the functions defined above.
* mips-linux-tdep.h (enum mips_signals): Remove.
XMALLOC is defined in defs.h.
Tested by building with --enable-targets=all.
gdb/
2013-08-09 Pedro Alves <palves@redhat.com>
* avr-tdep.c (XMALLOC): Delete macro.
* cli/cli-dump.c (XMALLOC): Delete macro.
I noticed the functions declared in cli-dump.h aren't used anywhere
outside cli-dump.c.
The original patch that introduced cli-dump.c didn't include this header:
http://sourceware.org/ml/gdb-patches/2002-03/msg00518.html
But for some reason that I couldn't find from reading the archives around
that patch's discussion, cli-dump.h was introduced in the final checkin,
at:
http://sourceware.org/ml/gdb-patches/2002-03/msg00596.html
There seems to be no point in keeping this around nowadays.
gdb/
2013-08-09 Pedro Alves <palves@redhat.com>
* cli/cli-dump.c: Don't include cli/cli-dump.h.
(scan_expression_with_cleanup, scan_filename_with_cleanup)
(fopen_with_cleanup, add_dump_command): Make static.
* cli/cli-dump.h: Delete file.
* Makefile.in (HFILES_NO_SRCDIR): Remove reference to
cli/cli-dump.h.
Before:
(gdb) tsave ~/a/b
Unable to open file '~/a/b' for saving trace data (No such file or directory)
After:
(gdb) tsave ~/a/b
Unable to open file '/home/pedro/a/b' for saving trace data (No such file or directory)
Tested on x86_64 Fedora 17.
gdb/
2013-08-09 Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_start): Show tilde-expanded filename in
error message.
Most commands in GDB show the tilde-expanded filename in user visible
output. This makes "save breakpoints" behave the same.
Before:
(gdb) save breakpoints ~/a/b
Unable to open file '~/a/b' for saving (No such file or directory)
After:
(gdb) save breakpoints ~/a/b
Unable to open file '/home/pedro/a/b' for saving (No such file or directory)
Tested on x86_64 Fedora 17.
gdb/
2013-08-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (save_breakpoints): Show tilde-expanded filename in
error message.
Most commands in GDB show the tilde-expanded filename in user visible
output. This makes gcore behave the same.
Before:
(gdb) generate-core-file ~/a/b
Failed to open '~/a/b' for output.
(gdb) generate-core-file ~/core
Saved corefile ~/core
After:
(gdb) generate-core-file ~/a/b
Failed to open '/home/pedro/a/b' for output.
(gdb) generate-core-file ~/core
Saved corefile /home/pedro/core
Tested on x86_64 Fedora 17.
gdb/
2013-08-09 Pedro Alves <palves@redhat.com>
* gcore.c (create_gcore_bfd): Don't use tilde_expand here.
(gcore_command): Use tilde_expand here, and when showing the
filename to the user, show the expanded version.
* stack.c (read_frame_arg): Set 'entryval_error' to NULL if
'entryval' is set.
gdb/testsuite/
* gdb.trace/collection.exp (gdb_collect_args_test): Set
"only" and "both" to 'print entry-values' before selecting
trace frame.
Before this patch, this fails:
(gdb) generate-core-file ~/core
Failed to open '~/core' for output.
After the patch:
(gdb) generate-core-file ~/core
Saved corefile ~/core
gdb/
2013-08-08 Azat Khuzhin <a3at.mail@gmail.com> (tiny change)
* gcore.c (create_gcore_bfd): Use tilde_expand.
* frame.h (read_frame_local): Declare.
* mi/mi-cmd-stack.c (list_args_or_locals): Call
read_frame_local.
* stack.c (read_frame_local): New.
gdb/testsuite/
* gdb.trace/mi-trace-unavailable.exp: Don't set
"print entry-values" to "no".
(test_trace_unavailable): Set various values to
"print entry-values" to test that the output of
'-stack-list-locals' is not affected, and then set
set "print entry-values" to "no".
* gdb.python/py-value-cc.exp: Update.
* gdb.python/py-value.exp: Use different names for .o files for
C and C++. Only perform C++ tests if !skip_cplus_tests.
This fixes some derivation.exp regressions with "dwz -m".
The bug here is that the imported PU is given language_minimal.
However, it ought to be C++.
The "pretend language" machinery exists to solve this problem, but it
wasn't handled in process_psymtab_comp_unit. So, this patch adds it
there.
Built and regtested, both normally and using "dwz -m", on x86-64
Fedora 18.
PR symtab/15028:
* dwarf2read.c (struct process_psymtab_comp_unit_data): New.
(process_psymtab_comp_unit_reader): Use it.
(process_psymtab_comp_unit): Update. Add "pretend_language"
argument.
(dwarf2_build_psymtabs_hard): Update.
(scan_partial_symbols): Pass CU's language to
process_psymtab_comp_unit.
After the previous patch in the series, nothing uses the "quick"
method find_symbol_file.
This patch removes it.
Tested by rebuilding.
* dwarf2read.c (dw2_get_primary_filename_reader): Remove.
(dwarf2_gdb_index_functions): Update.
* psymtab.c (find_symbol_file_from_partial): Remove.
(psym_functions): Update.
* symfile.h (struct quick_symbol_functions) <find_symbol_file>:
Remove.
With "dwz -m", "main" appears in both the PU and the importing CU when
running anon-struct.exp. However, the PU does not have a file name.
So, find_main_filename returns the empty string, making
deduce_language_from_filename return language_unknown.
This patch fixes this problem by changing gdb to use the ordinary
symbol-lookup functions to find "main"'s symbol. Then, it examines the
symbol's language.
I think this is cleaner than the current approach. For one thing it
avoids trying to guess the language based on the source file name,
instead deferring to the presumably more reliable debuginfo.
Another possible fix would have been to change how the file name is
found via the "qf" methods. However, I think the approach given is
preferable for the reason outlined above.
This required a minor test suite change, as now a symtab is expanded
during the search for "main".
Built and regtested (both ways) on x86-64 Fedora 18.
* symfile.c (set_initial_language): Look up "main" symbol
and use its language.
* symtab.c (find_main_filename): Remove.
* symtab.h (find_main_filename): Remove.
* gdb.base/maint.exp: Allow zero symtabs to be expanded.
Doug pointed out a while ago that in the final dwz -m patch, nothing
ever set symtab::user.
This patch fixes this oversight and adds a test case showing why it is
important.
Built and regtested (both ways) on x86-64 Fedora 18.
The new test unconditionally tests the partial unit machinery, which I
think is an added plus.
* dwarf2read.c (recursively_compute_inclusions): Add
"immediate_parent" argument. Set symtab's "user" field
if not set.
(compute_symtab_includes): Update.
* gdb.dwarf2/dwz.exp: New file.
The bug here is that, with dwz -m, a function (and a label) appear in
both a PU and a CU when running cplabel.exp. So, a breakpoint gets
two locations:
(gdb) break foo::bar:to_the_top
Breakpoint 2 at 0x400503: foo::bar:to_the_top. (2 locations)
What is especially wacky is that both locations are at the same place:
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
1.1 y 0x000000000040051c foo::bar:get_out_of_here
1.2 y 0x000000000040051c foo::bar:get_out_of_here
This happens due to the weird way we run "dwz -m".
It's unclear to me that this would ever happen for real code.
While I think this borders on "diminishing returns" territory, the fix
is pretty straightforward: use the existing address-filtering function
in linespec to also filter when looking at labels.
Built and regtested (both ways) on x86-64 Fedora 18.
* linespec.c (convert_linespec_to_sals): Use maybe_add_address
when adding label symbols.
Revert support for v2 DWP files:
2013-03-01 Cary Coutant <ccoutant@google.com>
Add dwp support for v2 DWARF package file format.
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter. Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.
Ulrich Weigand <uweigand@de.ibm.com>
* gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
is defined.
* rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
(rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
(rs6000_ptrace64): Call ptace64 instead of ptracex if present.
* configure.ac: Check for ptrace64.
* configure, config.in: Regenerate.
Ulrich Weigand <uweigand@de.ibm.com>
* aixthread.c: Call ptrace64 instead of ptracex if defined.
Call ptrace64 instead of ptrace if defined.
Add macro addr_ptr to take care of ptrace address argument.
(pdc_read_regs): Likewise.
(pdc_write_regs): Likewise.
(aix_thread_resume): Likewise.
(fetch_regs_kernel_thread): Likewise.
(store_regs_kernel_thread): Likewise.
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Add a suffixless version of
VCLIPW.
gas/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
suffixes to be elided too.
(mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
(mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
to be omitted too.
gas/testsuite/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow
single-channel suffixes to be elided.
This removes a few more erroneous calls to add_target. These calls
end up installing the target in a user-visible way; but these targets
are all auto-activated and, I think, should never be explicitly
requested.
I have no way to test these.
* aix-thread.c (_initialize_aix_thread): Use
complete_target_initialization.
* bsd-uthread.c (_initialize_bsd_uthread): Use
complete_target_initialization.
* dec-thread.c (_initialize_dec_thread): Use
complete_target_initialization.
* ravenscar-thread.c (_initialize_ravenscar): Use
complete_target_initialization.
* sol-thread.c (_initialize_sol_thread): Use
complete_target_initialization.
* spu-multiarch.c (_initialize_spu_multiarch): Use
complete_target_initialization.
2013-07-10 Jack Howarth <howarth@bromo.med.uc.edu>
PR target/57792
* configure.ac: Use --with-sysroot=\"`xcrun --show-sdk-path`\" on darwin13 and later.
* configure: Regenerated.
This is another patch in my ongoing series to "split" objfile to share
more read-only data across inferiors. See
http://sourceware.org/gdb/wiki/ObjfileSplitting
When symbols are finally shared, there will be no back-link from the
symbol to its containing objfile, because there may be more than one
such objfile. So, all such back-links must be removed.
One hidden back-link is the msymbol_objfile function. Since
(eventually) a symbol may appear in more than one objfile, trying to
look up the objfile given just a symbol cannot work.
This patch removes msymbol_objfile in favor of using a bound minimal
symbol. It introduces a new function to make this conversion simpler
in some spots.
The bonus of this patch is that using msymbol_objfile is slower than
simply looking up the owning objfile in the first place.
Built and regtested on x86-64 Fedora 18.
* ada-exp.y (write_var_or_type): Use bound_minimal_symbol.
* ada-lang.c (ada_lookup_simple_minsym): Return
bound_minimal_symbol.
* ada-lang.h (ada_lookup_simple_minsym): Update.
* c-exp.y (variable): Use lookup_bound_minimal_symbol.
* f-exp.y (variable): Use lookup_bound_minimal_symbol.
* go-exp.y (variable): Use lookup_bound_minimal_symbol.
* jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol.
* m2-exp.y (variable): Use lookup_bound_minimal_symbol.
* minsyms.c (msymbol_objfile): Remove.
(lookup_minimal_symbol_internal): New function, from
lookup_minimal_symbol.
(lookup_minimal_symbol): Rewrite using
lookup_minimal_symbol_internal.
(lookup_bound_minimal_symbol): New function.
* minsyms.h (msymbol_objfile): Remove.
(lookup_bound_minimal_symbol): Declare.
* p-exp.y (variable): Use lookup_bound_minimal_symbol.
* parse.c (write_exp_msymbol): Change parameter to a
bound_minimal_symbol.
(write_dollar_variable): Use lookup_bound_minimal_symbol.
* parser-defs.h (write_exp_msymbol): Update.
* printcmd.c (address_info): Use lookup_bound_minimal_symbol.
* symfile.c (simple_read_overlay_table): Use
lookup_bound_minimal_symbol.
* symtab.c (skip_prologue_sal): Don't use msymbol_objfile.
(search_symbols): Likewise.
(print_msymbol_info): Take a bound_minimal_symbol argument.
(symtab_symbol_info, rbreak_command): Update.
* symtab.h (struct symbol_search) <msymbol>: Change type
to bound_minimal_symbol.
* valops.c (find_function_in_inferior): Use
lookup_bound_minimal_symbol.
* value.c (value_fn_field): Use lookup_bound_minimal_symbol.
doc/
2013-08-05 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.texinfo (TCP port allocation lifecycle): Gdbserver by default
allows for subsequent and not for additional (multiple simultaneous)
connections.
Code cleanup.
* remote.c (cleanup_sigint_signal_handler): Rename the declaration
to ...
(async_cleanup_sigint_signal_handler): ... this.
(initialize_sigint_signal_handler): Remove declaration.
(handle_remote_sigint): Rename the declaration to ...
(async_handle_remote_sigint): ... this.
(handle_remote_sigint_twice): Rename the declaration to ...
(async_handle_remote_sigint_twice): ... this.
(async_remote_interrupt, async_remote_interrupt_twice)
(remote_interrupt): Remove the declarations.
(remote_interrupt_twice): Rename the declaration ...
(sync_remote_interrupt_twice): ... this.
(sigint_remote_twice_token): Rename the variable to ...
(async_sigint_remote_twice_token): ... this.
(sigint_remote_token): Rename the variable to ...
(async_sigint_remote_token): ... this.
(initialize_sigint_signal_handler): Rename the function to ...
(async_initialize_sigint_signal_handler): ... this. Update the name
inside.
(handle_remote_sigint): Rename the function to ...
(async_handle_remote_sigint): ... this. Update the names inside.
(handle_remote_sigint_twice): Rename the function to ...
(async_handle_remote_sigint_twice): ... this. Update the names inside.
(cleanup_sigint_signal_handler): Rename the function to ...
(async_cleanup_sigint_signal_handler): ... this.
(remote_interrupt): Rename the function to ...
(sync_remote_interrupt): this. Update the names inside.
(remote_interrupt_twice): Rename the function to ...
(sync_remote_interrupt_twice): this. Update the names inside.
(remote_terminal_inferior, remote_terminal_ours, remote_wait_as)
(_initialize_remote): Update the names inside.
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
