Remove zero-sized relocation section from a section group since it has
been removed from the output.
PR ld/25767
* elf.c (_bfd_elf_fixup_group_sections): Remove zero-sized
relocation section from section group.
For this enum:
typedef unsigned char byte;
enum byte_enum : byte
{
byte_val = 128
};
The unsigned attribute is not set:
(gdb) p byte_val
$1 = -128
That's because it uses the attributes of the 'byte' typedef for the enum.
So this changes it to use the attributes of the underlying 'unsigned char'
instead.
gdb/ChangeLog:
2020-04-03 Hannes Domani <ssbssa@yahoo.de>
PR gdb/25325
* dwarf2/read.c (read_enumeration_type): Fix typed enum attributes.
gdb/testsuite/ChangeLog:
2020-04-03 Hannes Domani <ssbssa@yahoo.de>
PR gdb/25325
* gdb.cp/typed-enum.cc: New test.
* gdb.cp/typed-enum.exp: New file.
While debugging another issue, I noticed that disassembling a DWARF
expression using DW_OP_const_type did not work.
disassemble_dwarf_expression was not properly decoding this operation.
This patch fixes the problem. Tested by re-debugging gdb.
I didn't write a test case because that seemed like overkill for
what's essentially a maintainer's helper.
The expression evaluator does decode this properly, so no other change
was needed.
gdb/ChangeLog
2020-04-03 Tom Tromey <tromey@adacore.com>
* dwarf2/loc.c (disassemble_dwarf_expression) <DW_OP_const_type>:
Read constant block.
The function is_linked_with_cygwin_dll currently uses
gdb_bfd_map_section to get some section contents. This is not ideal
because that memory, which is only used in this function, can't be
released. Instead, it was suggested to use
bfd_get_full_section_contents.
However, bfd_get_full_section_contents returns a newly allocated buffer,
which is not very practical to use with C++ automatic memory management
constructs. I decided to make gdb_bfd_get_full_section_contents, a
small alternative to bfd_get_full_section_contents. It is a small
wrapper around bfd_get_section_contents which returns the full contents
of the section in a gdb::byte_vector.
gdb_bfd_get_full_section_contents could be used at many places that
already allocate a vector of the size of the section and then call
bfd_get_section_contents. I think these call sites can be updated over
time.
gdb/ChangeLog:
* gdb_bfd.h: Include gdbsupport/byte-vector.h.
(gdb_bfd_get_full_section_contents): New declaration.
* gdb_bfd.c (gdb_bfd_get_full_section_contents): New function.
* windows-tdep.c (is_linked_with_cygwin_dll): Use
gdb_bfd_get_full_section_contents.
There are a few spots using the pattern:
if (condition)
internal_error (__FILE__, __LINE__,
_("failed internal consistency check"));
The message brings no value, since it's pretty the description of a
failed assertion. Replace a few of these that are obvious with
gdb_assert.
gdb/ChangeLog:
* exec.c (build_section_table): Replace internal_error with
gdb_assert.
(section_table_xfer_memory_partial): Likewise.
* mdebugread.c (parse_partial_symbols): Likewise.
* psymtab.c (lookup_partial_symbol): Likewise.
* utils.c (wrap_here): Likewise.
Tankut Baris Aktemur pointed out that the recent series to change how
complex types are handled introduced a regression.
This assert in init_complex_type was firing:
gdb_assert (TYPE_CODE (target_type) == TYPE_CODE_INT
|| TYPE_CODE (target_type) == TYPE_CODE_FLT);
The problem was that f-lang.c could call init_complex_type with a type
whose code was TYPE_CODE_ERROR.
It seemed best to me to fix this in f-lang.c, rather than to change
init_complex_type to accept error types.
Tested on x86-64 Fedora 30. I'm checking this in.
gdb/ChangeLog
2020-04-02 Tom Tromey <tromey@adacore.com>
* f-lang.c (build_fortran_types): Use arch_type to initialize
builtin_complex_s32 in the TYPE_CODE_ERROR case.
While profiling the DWARF reader, I noticed that
partial_die_info::read creates a vector to store attributes. However,
the vector is not needed, as this code only processes a single
attribute at a time.
This patch removes the vector. On my machine, this improves the time
of "./gdb ./gdb" from 2.22 seconds to 1.92 seconds (mean times over 10
runs).
Note that the attribute is initialized by read_attribute, so it does
not need any special initialization. Avoiding this also improves
performance a bit.
Tested on x86-64 Fedora 30. I'm checking this in.
gdb/ChangeLog
2020-04-02 Tom Tromey <tromey@adacore.com>
* dwarf2/read.c (partial_die_info::read): Do not create a vector
of attributes.
In this commit:
commit 8c95582da8
Date: Mon Dec 30 21:04:51 2019 +0000
gdb: Add support for tracking the DWARF line table is-stmt field
A change was made in buildsym_compunit::record_line to remove
duplicate line table entries in some cases. This was an invalid
change, as these duplicate line table entries are used in _some_ cases
as part of prologue detection (see skip_prologue_using_sal).
It might be possible to identify those line table entries that are
required by skip_prologue_using_sal and only keep those duplicates
around, however, I have not done this here. The original duplicate
removal was done because (a) it was easy to implement, and (b) it
seemed obviously harmless.
As (b) is now known to be false, and implementation would be more
complex, and so (a) is also false. As such, it seems better to keep
all duplicates until an actual reason presents itself for why we
should remove any.
The original regression was spotted on RISC-V, which makes use of
skip_prologue_using_sal as part of riscv_skip_prologue. Originally I
created the test gdb.dwarf2/dw2-inline-small-func.exp, however, this
test will not compile on RISC-V as this target doesn't support
.uleb128 or .sleb128 assembler directives containing complex
expressions. As a result I added the gdb.opt/inline-small-func.exp
test, which exposes the bug on RISC-V, but obviously depends on the
compiler to produce specific DWARF information in order to expose the
bug. Still this test does ensure we always get the desired result,
even if the DWARF changes.
Originally the gdb.dwarf2/dw2-inline-small-func.exp test passed on
x86-64 even with the duplicate line table entries incorrectly
removed. The reason for this is that when a compilation unit doesn't
have a 'producer' string then skip_prologue_using_sal is not used,
instead the prologue is always skipped using analysis of the assembler
code.
However, for Clang on x86-64 skip_prologue_using_sal is used, so I
modified the gdb.dwarf2/dw2-inline-small-func.exp test to include a
'producer' string that names the Clang compiler. With this done the
test would fail on x86-64.
One thing to note is that the gdb.opt/inline-small-func.exp test might
fail on some targets. For example, if we compare sparc to risc-v by
looking at sparc32_skip_prologue we see that this function doesn't use
skip_prologue_using_sal, but instead uses find_pc_partial_function
directly. I don't know the full history behind why the code is like
it is, but it feels like sparc32_skip_prologue is an attempt to
duplicate some of the functionality of skip_prologue_using_sal, but
without all of the special cases. If this is true then the new test
could easily fail on this target, this would suggest that sparc should
consider switching to use skip_prologue_using_sal like risc-v does.
gdb/ChangeLog:
* buildsym.c (buildsym_compunit::record_line): Remove
deduplication code.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-inline-small-func-lbls.c: New file.
* gdb.dwarf2/dw2-inline-small-func.c: New file.
* gdb.dwarf2/dw2-inline-small-func.exp: New file.
* gdb.dwarf2/dw2-inline-small-func.h: New file.
* gdb.opt/inline-small-func.c: New file.
* gdb.opt/inline-small-func.exp: New file.
* gdb.opt/inline-small-func.h: New file.
Extend the Dejagnu DWARF compiler to support DW_LNS_set_file opcode.
This will be used in a later commit. There should be no change in the
testsuite after this commit.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf::lines::program::DW_LNS_set_file): New
function.
When using the Dejagnu DWARF compiler tests will often use the
function_range helper function to extract the extents of a function.
If the plan is to compiler the file with non-default compiler flags
then we must pass those same compiler flags through to the
function_range helper function.
This will be used in a later commit, there should be no change in the
testsuite behaviour after this commit.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (function_range): Allow compiler options to be
specified.
In test-case gdb.dwarf2/break-inline-psymtab.exp we use O2 to enable inlining
of bar into foo in break-inline-psymtab-2.c.
Instead, enforce inlining using __attribute__((always_inline)), to avoid any
optimization-related test issues.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/break-inline-psymtab-2.c (bar): Add
__attribute__((always_inline)).
* gdb.dwarf2/break-inline-psymtab.exp: Don't use -O2.
GCC in Ubuntu 20.04 enables -fcf-protection by default, which leads to
FAIL: S-records
FAIL: S-records with constructors
FAIL: Build plt-main with -z bndplt
FAIL: Build plt-main with PIE and -z bndplt
FAIL: Build plt-main with -z bndplt -z now
FAIL: Build plt-main with PIE and -z bndplt -z now
on x86-64. Add NOCF_PROTECTION_CFLAGS to pass -fcf-protection=none on
these tests.
* testsuite/config/default.exp (NOCF_PROTECTION_CFLAGS): New.
Set to "-fcf-protection=none" if target compiler supports it.
* testsuite/ld-srec/srec.exp: Add $NOCF_PROTECTION_CFLAGS to
CC and CXX.
* testsuite/ld-x86-64/x86-64.exp: Add $NOCF_PROTECTION_CFLAGS
to PLT BND tests.
The stub size in GO32 executables has historically been fixed at 2048
bytes, due to hardcoded limitations in bfd. Recent patches to djgpp by
Stas Sergeev (CC'd) have pushed the stub right up to this limit, so if
any further expansion is desired, this must first be patched in bfd.
This series includes three patches: The first changes the meaning of
the bfd->origin field slightly, so that target code can use this to
specify an offset into the file where the actual bfd is located.
The second patch then uses this to enable support for variable-sized
stubs in the coff-go32-exe format.
The final patch is only a cleanup, it normalizes function and variable
names in coff-stgo32.c so that they all begin with the same prefix.
bfd * bfdio.c (bfd_bread, bfd_tell, bfd_seek, bfd_mmap): Always add
bfd->origin to file offset.
* bfdwin.c (bfd_get_file_window): Likewise.
* bfd.c: Clarify the use of the bfd->origin field.
* bfd-in2.h: Regenerate.
* coff-i386.c: Don't include go32exe.h. Allow overriding
coff_write_object_contents via COFF_WRITE_CONTENTS.
* coff-stgo32.c (go32exe_cleanup, go32exe_mkobject)
(go32exe_write_object_contents): New functions.
(go32exe_temp_stub, go32exe_temp_stub_size): New static globals.
(COFF_WRITE_CONTENTS, GO32EXE_DEFAULT_STUB_SIZE): Define.
(create_go32_stub): Remove check for 2k size limit. Read stub
from go32exe_temp_stub if present.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Allocate and
copy variable-length stub.
(go32_check_format): Read stub to go32exe_temp_stub, set
origin, return go32exe_cleanup.
(adjust_filehdr_in_post, adjust_filehdr_out_pre)
(adjust_filehdr_out_post, adjust_scnhdr_in_post)
(adjust_scnhdr_out_pre, adjust_scnhdr_out_post)
(adjust_aux_in_post, adjust_aux_out_pre, adjust_aux_out_post):
Remove functions and their associated #defines.
* coffcode.h (coff_mkobject_hook): Remove stub copying code.
* libcoff-in.h: (struct coff_tdata): New field stub_size.
Rename field go32stub to stub.
* libcoff.h: Regenerate.
* coff-stgo32.c (go32_check_format): Rename to...
(go32exe_check_format): ...this.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Rename to...
(go32exe_copy_private_bfd_data): ...this.
(stub_bytes): Rename to...
(go32exe_default_stub): ...this.
(create_go32_stub): Rename to...
(go32exe_create_stub): ...this.
* coff-stgo32.c (go32exe_copy_private_bfd_data): Avoid realloc
when possible.
include * coff/go32exe.h: Remove file.
* coff/internal.h (struct internal_filehdr): Remove field
go32stub. Remove flag F_GO32STUB.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'get_ipa_tdesc_idx' linux target op and let a concrete
linux target define the op by overriding the declaration in
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <get_ipa_tdesc_idx>: Remove.
* linux-low.cc (linux_process_target::get_ipa_tdesc_idx): Remove.
* linux-x86-low.cc (class x86_target) <get_ipa_tdesc_idx>: Declare.
(x86_get_ipa_tdesc_idx): Turn into...
(x86_target::get_ipa_tdesc_idx): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <get_ipa_tdesc_idx>: Declare.
(ppc_get_ipa_tdesc_idx): Turn into...
(ppc_target::get_ipa_tdesc_idx): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <get_ipa_tdesc_idx>: Declare.
(s390_get_ipa_tdesc_idx): Turn into...
(s390_target::get_ipa_tdesc_idx): ...this.
(the_low_target): Remove the op field.
All the linux low targets except arm define the
'supports_hardware_single_step' op to return true. Hence, we override
the method to return true in linux_process_target, and remove the
definitions in all the linux low targets but arm.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_hardware_single_step' linux target op and
override the process_stratum_target's op definition in
linux_process_target to return true.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <finish_step_over>
<maybe_hw_step>: Declare.
* linux-low.cc (can_hardware_single_step): Remove.
(maybe_hw_step): Turn into...
(linux_process_target::maybe_hw_step): ...this.
(finish_step_over): Turn into...
(linux_process_target::finish_step_over): ...this.
(linux_process_target::supports_hardware_single_step): Update
to return true.
Update the callers below.
(linux_process_target::single_step)
(linux_process_target::resume_one_lwp_throw)
* linux-arm-low.cc (class arm_target)
<supports_hardware_single_step>: Declare.
(arm_supports_hardware_single_step): Turn into...
(arm_target::supports_hardware_single_step): ...this.
(the_low_target): Remove the op field.
* linux-x86-low.cc (x86_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (aarch64_supports_hardware_single_step):
Remove.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (bfin_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (cris_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (m32r_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (m68k_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (ppc_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-s390-low.cc (s390_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-sh-low.cc (sh_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (tic6x_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-tile-low.cc (tile_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (xtensa_supports_hardware_single_step):
Remove.
(the_low_target): Remove the op field.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'arch_setup' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <arch_setup>: Delete.
(class linux_process_target) <arch_setup_thread>
<low_arch_setup>: New declarations.
* linux-low.cc (linux_arch_setup): Delete.
(linux_arch_setup_thread): Turn into...
(linux_process_target::arch_setup_thread): ... this.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::post_create_inferior)
(linux_process_target::filter_event)
* linux-x86-low.cc (class x86_target) <low_arch_setup>: New
declaration.
(x86_linux_update_xmltarget): Turn into...
(x86_target::update_xmltarget): ...this.
(x86_linux_process_qsupported): Update the call to
x86_linux_update_xmltarget.
(x86_arch_setup): Turn into ...
(x86_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <low_arch_setup>: New
declaration.
(aarch64_arch_setup): Turn into ...
(aarch64_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_arch_setup>: New
declaration.
(arm_arch_setup): Turn into ...
(arm_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <low_arch_setup>: New
declaration.
(bfin_arch_setup): Turn into ...
(bfin_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <low_arch_setup>: New
declaration.
(cris_arch_setup): Turn into ...
(cris_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target) <low_arch_setup>: New
declaration.
(crisv32_arch_setup): Turn into ...
(crisv32_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <low_arch_setup>: New
declaration.
(ia64_arch_setup): Turn into ...
(ia64_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (class m32r_target) <low_arch_setup>: New
declaration.
(m32r_arch_setup): Turn into ...
(m32r_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <low_arch_setup>: New
declaration.
(m68k_arch_setup): Turn into ...
(m68k_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_arch_setup>: New
declaration.
(mips_arch_setup): Turn into ...
(mips_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target) <low_arch_setup>: New
declaration.
(nios2_arch_setup): Turn into ...
(nios2_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <low_arch_setup>: New
declaration.
(ppc_arch_setup): Turn into ...
(ppc_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <low_arch_setup>: New
declaration.
(riscv_arch_setup): Turn into ...
(riscv_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <low_arch_setup>: New
declaration.
(s390_arch_setup): Turn into ...
(s390_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target) <low_arch_setup>: New
declaration.
(sh_arch_setup): Turn into ...
(sh_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <low_arch_setup>: New
declaration.
(sparc_arch_setup): Turn into ...
(sparc_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <low_arch_setup>: New
declaration.
(tic6x_arch_setup): Turn into ...
(tic6x_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <low_arch_setup>: New
declaration.
(tile_arch_setup): Turn into ...
(tile_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target) <low_arch_setup>: New
declaration.
(xtensa_arch_setup): Turn into ...
(xtensa_target::low_arch_setup): ...this.
(the_low_target): Remove the op field.
This is the beginning of a series of patches that convert the linux
low targets into classes derived from linux_process_target. At the
end of the series we obtain a class hierarchy that looks like this:
process_stratum_target
^
|
|-- linux_process_target
^
|
|-- x86_target (defined in linux-x86-low)
|-- aarch64_target (defined in linux-aarch64-low)
|-- ppc_target (defined in linux-ppc-low)
|-- ...
In several cases, linux_process_target simply forwards a target op
request to a corresponding linux_target_ops function. For these
cases, the definition in linux_process_target will be removed and the
definition will be left to the deriving linux low target class; using
inheritance provides a nice and natural, object-oriented
simplification in these cases.
The series converts linux_target_ops into protected methods of
linux_process_target one by one. Throughout the series, based on the
needs, static functions defined in linux-low.cc are converted to
private methods of linux_process_target as well. This is done either
as separate patches or as integrated into a patch that convert a
particular linux_target_op into a method.
The series ends with the patch titled "gdbserver/linux-low: delete
'linux_target_ops' and 'the_low_target'".
Built and regression-tested on x86_64-linux. The following linux low
targets have been built (but not tested) via cross-compilation:
aarch64, arm, m68k, mips, ppc, riscv, s390, sh, sparc. The other
targets (bfin, cris, crisv32, ia64, m32r, nios2, tic6x, tile, xtensa)
were neither built nor tested.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-low.h (the_linux_target): New extern declaration.
* linux-low.cc (initialize_low): Use 'the_linux_target' to set
'the_target'.
(the_linux_target): Remove.
* linux-x86-low.cc (class x86_target): New class.
(the_x86_target): New static object.
(the_linux_target): Define as pointer to the_x86_target.
* linux-aarch64-low.cc (class aarch64_target): New class.
(the_aarch64_target): New static object.
(the_linux_target): Define as pointer to the_aarch64_target.
* linux-arm-low.cc (class arm_target): New class.
(the_arm_target): New static object.
(the_linux_target): Define as pointer to the_arm_target.
* linux-bfin-low.cc (class bfin_target): New class.
(the_bfin_target): New static object.
(the_linux_target): Define as pointer to the_bfin_target.
* linux-cris-low.cc (class cris_target): New class.
(the_cris_target): New static object.
(the_linux_target): Define as pointer to the_cris_target.
* linux-crisv32-low.cc (class crisv32_target): New class.
(the_crisv32_target): New static object.
(the_linux_target): Define as pointer to the_crisv32_target.
* linux-ia64-low.cc (class ia64_target): New class.
(the_ia64_target): New static object.
(the_linux_target): Define as pointer to the_ia64_target.
* linux-m32r-low.cc (class m32r_target): New class.
(the_m32r_target): New static object.
(the_linux_target): Define as pointer to the_m32r_target.
* linux-m68k-low.cc (class m68k_target): New class.
(the_m68k_target): New static object.
(the_linux_target): Define as pointer to the_m68k_target.
* linux-mips-low.cc (class mips_target): New class.
(the_mips_target): New static object.
(the_linux_target): Define as pointer to the_mips_target.
* linux-nios2-low.cc (class nios2_target): New class.
(the_nios2_target): New static object.
(the_linux_target): Define as pointer to the_nios2_target.
* linux-ppc-low.cc (class ppc_target): New class.
(the_ppc_target): New static object.
(the_linux_target): Define as pointer to the_ppc_target.
* linux-riscv-low.cc (class riscv_target): New class.
(the_riscv_target): New static object.
(the_linux_target): Define as pointer to the_riscv_target.
* linux-s390-low.cc (class s390_target): New class.
(the_s390_target): New static object.
(the_linux_target): Define as pointer to the_s390_target.
* linux-sh-low.cc (class sh_target): New class.
(the_sh_target): New static object.
(the_linux_target): Define as pointer to the_sh_target.
* linux-sparc-low.cc (class sparc_target): New class.
(the_sparc_target): New static object.
(the_linux_target): Define as pointer to the_sparc_target.
* linux-tic6x-low.cc (class tic6x_target): New class.
(the_tic6x_target): New static object.
(the_linux_target): Define as pointer to the_tic6x_target.
* linux-tile-low.cc (class tile_target): New class.
(the_tile_target): New static object.
(the_linux_target): Define as pointer to the_tile_target.
* linux-xtensa-low.cc (class xtensa_target): New class.
(the_xtensa_target): New static object.
(the_linux_target): Define as pointer to the_xtensa_target.
The comment for the linux target op 'cannot_store_register' states the
following:
/* Returns 0 if we can store the register, 1 if we can not
store the register, and 2 if failure to store the register
is acceptable. */
There is only one low target, linux-ppc-low, that potentially returns
2. There are two places that call the 'cannot_store_register' target
op in linux-low.cc. None of these locations distinguish a '2' from a
'1'. Hence, to simplify the definition, make the function a predicate
that returns either 0 or 1. This is also consistent with the
companion function, 'cannot_fetch_register'.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-low.h (struct linux_target_ops): Update the comment for
'cannot_store_register' to return 0 or 1.
* linux-ppc-low.cc (ppc_cannot_store_register): Return 1 instead
of 2.
Compile with -I../bfd to include <bfd_stdint.h> in PR ld/25749 tests.
* testsuite/ld-elf/linux-x86.exp (check_pr25749a): Compile with
-I../bfd.
(check_pr25749b): Likewise.
GDB Administrator
H.J. Lu
Hannes Domani
Tom Tromey
Simon Marchi
Andrew Burgess
Tom de Vries
Jan W. Jagersma
Tankut Baris Aktemur
LiliCui