In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
- Command line arguments are fetched via the kern.proc.args.<pid>
sysctl.
- The 'cwd' and 'exe' values are obtained from the per-process
file descriptor table returned by kinfo_getfile() from libutil.
- 'mappings' is implemented by walking the array of VM map entries
returned by kinfo_getvmmap() from libutil.
- 'status' output is generated by outputting fields from the structure
returned by the kern.proc.pid.<pid> sysctl.
- 'stat' is aliased to 'status'.
gdb/ChangeLog:
* configure.ac: Check for kinfo_getfile in libutil.
* configure: Regenerate.
* config.in: Regenerate.
* fbsd-nat.c: Include "fbsd-tdep.h".
(fbsd_fetch_cmdline): New.
(fbsd_fetch_kinfo_proc): Move earlier and change to return a bool
rather than calling error.
(fbsd_info_proc): New.
(fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails.
(fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails.
(fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc".
This is the previously mentioned patch to get rid of
unstructured/ioctl-based procfs support in procfs.c. Given that support
for structured procfs was introduced in Solaris 2.6 back in 1997 and
we're just removing support for Solaris < 10, there's no point in
carrying that baggage (and tons of support for IRIX and OSF/1 as well)
around any longer.
Most of the patch should be straightforward (removing support for
!NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks).
Only a few points need explanations:
* <sys/syscall.h> was already included unconditionally in most places,
so there's no need to have guards in a few remaining ones.
* configure.host already obsoletes i?86-*-sysv4.2, i?86-*-sysv5, so
NEW_PROC_API detection for those in configure.ac can go.
* I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1.
Theoretically, it would be better to include <procfs.h> on Solaris
(which includes that define), but that breaks the build over
<procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux.
* I've regenerated syscall_table[] in proc-events.c with a small script
from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no
traces of older Solaris versions and other OSes left.
* prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX
doesn't use procfs.c any longer, so all related code can go.
The patch was generated with diff -w so one can easier see changes
without being distracted by simple reindentations.
So far, it has only been compiled and smoke-tested on
amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and
x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3
vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on
Solaris 10 etc.), but it's enough to get a first impression how much
cleanup is possible here.
* configure.ac Don't check for sys/fault.h, sys/syscall.h,
sys/proc.h.
(NEW_PROC_API): Remove.
(prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t):
Likewise.
* common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h.
* configure: Regenerate.
* config.in: Regenerate.
* gdbserver/configure: Regenerate.
* gdbserver/config.in: Regenerate.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove
NEW_PROC_API test.
* sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise.
* linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test.
* proc-api.c: Remove !NEW_PROC_API support.
Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests.
Remove tests for macros always defined on Solaris.
* proc-events.c: Remove !NEW_PROC_API support.
Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and
HAVE_SYS_USER_H tests.
(init_syscall_table): Remove non-Solaris syscalls.
Remove tests for syscalls present on all Solaris versions.
Add missing Solaris 10+ syscalls.
(signal_table): Remove non-Solaris signals.
Remove tests for signals present on all Solaris versions.
(fault_table): Remove non-Solaris faults.
Remove tests for faults present on all Solaris versions.
* proc-flags.c: Remove !NEW_PROC_API support.
(pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments.
Remove non-Solaris flags.
* proc-why.c: Remove !NEW_PROC_API support.
(pr_why_table): Remove meaningless comments.
Remove tests for reasons present on all Solaris versions.
Remove OSF/1 cases.
(proc_prettyfprint_why): Likewise.
* procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support.
Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests.
Remove WA_READ test, IRIX watchpoint support.
(gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base
types. Change users.
(gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset)
(gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros.
Change callers.
Remove CTL_PROC_NAME_FMT tests.
(gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change
users.
(sysset_t_size): Remove. Use sizeof (sysset_t) in callers.
Remove PROCFS_DONT_PIOCSSIG_CURSIG support.
(proc_modify_flag): Replace GDBRESET by PCUNSET.
Remove PR_ASYNC, PR_KLC tests.
(proc_unset_inherit_on_fork): Remove PR_ASYNC test.
(proc_parent_pid): Remove PCWATCH etc. tests.
(proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support.
Remove PCAGENT test.
(proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove.
Remove SYS_lwpcreate || SYS_lwp_create test.
(proc_get_current_thread): Likewise.
[PIOCNTHR && PIOCTLIST]: Remove.
[PIOCLSTATUS]: Remove.
(procfs_debug_inferior): Remove non-Solaris cases, conditionals.
[PRFS_STOPEXEC]: Remove.
(syscall_is_lwp_exit): Remove non-Solaris cases, conditionals.
(syscall_is_exit): Likewise.
(syscall_is_exec): Likewise.
(syscall_is_lwp_create): Likewise.
Remove SYS_syssgi support.
(procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests.
[SYS_syssgi]: Remove.
Remove non-Solaris cases, conditionals.
(unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]:
Remove.
(procfs_init_inferior) [SYS_syssgi]: Remove.
(procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove.
(procfs_inferior_created) [SYS_syssgi]: Remove.
(procfs_set_watchpoint): Remove !AIX5 test.
(procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH
case.
(mappingflags) [MA_PHYS]: Remove.
(info_mappings_callback): Remove PCAGENT test.
Remove PIOCOPENLWP || PCAGENT test.
This second patch introduces mfpr_float_ops, an new implementation
of target_float_ops. This implements precise emulation of target
floating-point formats using the MPFR library. This is then used
to perform operations on types that do not match any host type.
Note that use of MPFR is still not required. The patch adds
a configure option --with-mpfr similar to --with-expat. If use of
MPFR is disabled via the option or MPFR is not available, code will
fall back to current behavior. This means that operations on types
that do not match any host type will be implemented on the host
long double type instead.
A new test case verifies that we can correctly print the largest
__float128 value now.
gdb/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Document use of GNU MPFR.
* README: Likewise.
* Makefile.in (LIBMPFR): Add define.
(CLIBS): Add $(LIBMPFR).
* configure.ac: Add --with-mpfr configure option.
* configure: Regenerate.
* config.in: Regenerate.
* target-float.c [HAVE_LIBMPFR]: Include <mpfr.h>.
(class mpfr_float_ops): New type.
(mpfr_float_ops::from_target): Two new overloaded functions.
(mpfr_float_ops::to_target): Likewise.
(mpfr_float_ops::to_string): New function.
(mpfr_float_ops::from_string): Likewise.
(mpfr_float_ops::to_longest): Likewise.
(mpfr_float_ops::from_longest): Likewise.
(mpfr_float_ops::from_ulongest): Likewise.
(mpfr_float_ops::to_host_double): Likewise.
(mpfr_float_ops::from_host_double): Likewise.
(mpfr_float_ops::convert): Likewise.
(mpfr_float_ops::binop): Likewise.
(mpfr_float_ops::compare): Likewise.
(get_target_float_ops): Use mpfr_float_ops if available.
gdb/doc/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.texinfo (Requirements): Document use of GNU MPFR.
gdb/testsuite/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.base/float128.c (large128): New variable.
* gdb.base/float128.exp: Add test to print largest __float128 value.
common/common.m4 still had checks for termio.h/sgtty.h that are stale
now. Remove them.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* common/common.m4 (GDB_AC_COMMON): No longer check termio.h nor
sgtty.h.
* config.in, configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* config.in, configure: Regenerate.
Triggered by https://launchpad.net/bugs/1275210, to be able to cope
with UTF-8 characters in gdbtui.
Reference:
https://sourceware.org/ml/gdb-patches/2017-09/msg00356.html
gdb/ChangeLog:
2017-09-26 Matthias Klose <doko@ubuntu.com>
* configure.ac: Search ncursesw before ncurses.
Check ncursesw/ncurses.h before ncurses/ncurses.h.
* gdb_curses.h: Include <ncursesw/ncurses.h>
* config.in, configure: Regenerate.
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013:
https://gcc.gnu.org/gcc-4.9/changes.htmlhttps://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html
and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when
configured with --disable-build-with-cxx, it's time to obsolete/remove support
for Solaris < 10.
This patch does this, simplifying configure.nat along the way (only a single
sol2 configuration with variants for i386 and sparc).
Some configure checks for older Solaris versions can go, too, and the check
for libthread_db.so.1 removed:
* Since Solaris 10, dlopen has moved to libc and libdl.so is just a
filter on ld.so.1, so no need to check.
* $RDYNAMIC is already handled above (and is a no-op with Solaris ld
anyway).
Both proc-service.c and sol-thread.c lose support for (Solaris-only)
PROC_SERVICE_IS_OLD.
The attached revised patch has been tested on sparcv9-sun-solaris2.10,
sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4,
and x86_64-pc-linux-gnu.
I've also started an i386-pc-solaris2.9 build to check that it really
stops as expected.
PR gdb/22185
* configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as
obsolete.
Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*.
Remove i386sol2 support.
* configure.nat <i386sol2>: Remove.
<sol2-64>: Fold into ...
<sol2>: ... this.
Move common settings to default section.
Add sol-thread.o.
* configure.tgt <i[34567]86-*-solaris2.1[0-9]*,
x86_64-*-solaris2.1[0-9]*>: Rename to ...
<i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this.
<i[34567]86-*-solaris*>: Remove.
<sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove.
* configure.ac: Remove wctype in libw check.
(_MSE_INT_H): Don't define on Solaris 7-9.
<solaris*>: Remove libthread_db.so.1 check.
* configure: Regenerate.
* config.in: Regenerate.
* proc-service.c: Remove PROC_SERVICE_IS_OLD handling.
(gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t)
(gdb_ps_size_t): Remove.
Use base types in users.
* sol-thread.c: Likewise, also for gdb_ps_addr_t.
* NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
Version 2 of libipt adds an event system to instruction flow decoders and
deprecates indicating events via flags in struct pt_insn. Add configuration
checks to determine which version we have.
gdb/
* configure.ac: Check for pt_insn_event, struct pt_insn.enabled,
and struct pt_insn.resynced.
* configure: Regenerated.
* config.in: Regenerated.
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11,
and if -std=xxx switches are necessary to enable C++11.
We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine
upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly.
That doesn't work for us, because the top level Makefile passes CXX
down to subdirs, and that overrides whatever gdb/Makefile may set CXX
to. The result would be that a make invocation from the build/gdb/
directory would use "g++ -std=gnu++11" as expected, while a make
invocation at the top level would not.
So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it
to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX)
(CXX_DIALECT)' to compile/link.
Confirmed that this enables C++11 starting with gcc 4.8, the first gcc
release with full C++11 support.
Also confirmed that configure errors out gracefully with older GCC
releases:
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no
configure: error: *** A compiler with support for C++11 language features is required.
Makefile:9451: recipe for target 'configure-gdb' failed
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7'
If we need to revert back to making C++11 optional, all that's
necessary is to change the "mandatory" to "optional" in configure.ac
and regenerate configure (both gdb and gdbserver).
gdb/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
(FLAGS_TO_PASS): Pass CXX_DIALECT.
* acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
* ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
* acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
All platforms on FreeBSD use a shared system call table, so use a
single XML file to describe the system calls available on each FreeBSD
platform.
Recent versions of FreeBSD include the identifier of the current
system call when reporting a system call entry or exit event in the
ptrace_lwpinfo structure obtained via PT_LWPINFO in fbsd_wait. As
such, FreeBSD native targets do not use the gdbarch method to fetch
the system call code. In addition, FreeBSD register sets fetched via
ptrace do not include an equivalent of 'orig_rax' (on amd64 for
example), so the system call code cannot be extracted from the
available registers during a system call exit. However, GDB assumes
that system call catch points are not supported if the gdbarch method
is not present. As a workaround, FreeBSD ABIs install a dummy gdbarch
method that throws an internal_error if it is ever invoked.
gdb/ChangeLog:
* configure.ac: Check for support for system call LWP fields on
FreeBSD.
* config.in, configure: Rebuild.
* data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
* fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Report system call events.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
(fbsd_set_syscall_catchpoint): New function.
(fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
* fbsd-tdep.c: Include xml-syscall.h
(fbsd_get_syscall_number): New function.
(fbsd_init_abi): Set XML system call file name.
Add "get_syscall_number" gdbarch method.
* syscalls/freebsd.xml: New file.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
Older versions of FreeBSD supported userland threading via a pure
user-space threading library (N threads scheduled on 1 process) and
a N:M model (N threads scheduled on M LWPs). However, modern FreeBSD
versions only support a M:M threading model where each user thread is
backed by a dedicated LWP. This thread target only supports this
threading model. It also uses ptrace to query and alter LWP state
directly rather than using libthread_db to simplify the implementation.
FreeBSD recently gained support for reporting LWP events (birth and death
of LWPs). GDB will use LWP events when present. For older systems it
fetches the list of LWPs in the to_update_thread_list target op to update
the list of threads on each stop.
This target supports scheduler locking by using ptrace to suspend
individual LWPs as necessary before resuming a process.
gdb/ChangeLog:
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
Multitarget builds currently fail when:
(1) simulator support is enabled (the main --target supports target sim)
(2) powerpc is included in the --enable-targets list
(3) powerpc is not the main/default target (--target)
This is because the powerpc sim provides a non-standard API function
sim_spr_register_name which gdb/rs6000-tdep.c utilizes. Since the sim
does not yet support multitarget, only the sim (if one exists) for the
main target is built. When that target isn't powerpc, this function
is not available leading to linking errors:
rs6000-tdep.c:(.text+0x1e34d): undefined reference to
`sim_spr_register_name'
Fix this by only using that API if the sim linked in is the powerpc
sim.
gdb/ChangeLog:
2016-01-05 Pedro Alves <palves@redhat.com>
PR sim/13418
* configure.ac: Define WITH_PPC_SIM when linking in the sim and
the target is powerpc*.
* configure: Regenerate.
* config.in: Regenerate.
Since we now rely on PTRACE_EVENT_CLONE being available (added in
Linux 2.5.46), we're relying on NPTL.
This commit removes the support for older LinuxThreads, as well as the
workarounds for vendor 2.4 kernels with NPTL backported.
- Rely on tkill being available.
- Assume gdb doesn't get cancel signals.
- Remove code that checks the LinuxThreads restart and cancel signals
in the inferior.
- Assume that __WALL is available.
- Assume that non-leader threads report WIFEXITED.
- Thus, no longer need to send signal 0 to check whether threads are
still alive.
- Update comments throughout.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
* configure.ac: Remove tkill checks.
* configure, config.in: Regenerate.
* linux-nat.c: Remove HAVE_TKILL_SYSCALL check. Update top level
comments.
(linux_nat_post_attach_wait): Remove 'cloned' parameter. Use
__WALL.
(attach_proc_task_lwp_callback): Don't set the cloned flag.
(linux_nat_attach): Adjust.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_handle_extended_wait): Use __WALL. Don't set the cloned
flag.
(wait_lwp): Use __WALL. Update comments.
(running_callback, stop_and_resume_callback): Delete.
(linux_nat_filter_event): Don't stop and resume all lwps. Don't
check if the event LWP has previously exited.
(check_zombie_leaders): Update comments.
(linux_nat_wait_1): Use __WALL.
(kill_wait_callback): Don't handle clone processes separately.
Use __WALL instead.
(linux_thread_alive): Delete.
(linux_nat_thread_alive): Return true as long as the LWP is in the
LWP list.
(linux_nat_update_thread_list): Assume the kernel supports
PTRACE_EVENT_CLONE.
(get_signo): Delete.
(lin_thread_get_thread_signals): Remove LinuxThreads references.
No longer check __pthread_sig_restart / __pthread_sig_cancel in
the inferior.
* linux-nat.h (struct lwp_info) <cloned>: Delete field.
* linux-thread-db.c: Update comments.
(_initialize_thread_db): Remove LinuxThreads references.
* nat/linux-waitpid.c (my_waitpid): No longer emulate __WALL.
Pass down flags unmodified.
* linux-waitpid.h (my_waitpid): Update documentation.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_kill_one_lwp): Remove references to
LinuxThreads.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_init_signals): Delete.
(initialize_low): Adjust.
* thread-db.c (thread_db_init): Remove LinuxThreads reference.
Since we're using sighandler_t, nothing else refers to RETSIGTYPE in
gdb.
(Actually, given gdb/remote.c has been assuming signal handlers return
void for a long time, we could have gotten get rid of this even
without gnulib's sighandler_t.)
gdb/ChangeLog:
2015-08-27 Pedro Alves <palves@redhat.com>
* configure.ac: Remove AC_TYPE_SIGNAL call.
* configure, config.in: Regenerate.
Building in C++ mode issues ~40 warnings like this:
../../src/gdb/linux-nat.c: In function ‘int linux_handle_extended_wait(lwp_info*, int, int)’:
../../src/gdb/linux-nat.c:2016:51: warning: invalid conversion from ‘int’ to ‘__ptrace_request’ [-fpermissive]
ptrace (PTRACE_GETEVENTMSG, pid, 0, &new_pid);
The issue is that in glibc, ptrace's first parameter is an enum.
That's not a problem if we pick the PTRACE_XXX requests from
sys/ptrace.h, as those will be values of the corresponding enum.
However, we have fallback definitions for PTRACE_XXX symbols when the
system headers miss them (such as PTRACE_GETEVENTMSG above), and those
are plain integer constants. E.g., nat/linux-ptrace.h:
#define PTRACE_GETEVENTMSG 0x4201
One idea would be to fix this by defining those fallbacks like:
-#define PTRACE_GETEVENTMSG 0x4201
+#define PTRACE_GETEVENTMSG ((enum __ptrace_request) 0x4201)
However, while glibc's ptrace uses enum __ptrace_request for first
parameter:
extern long int ptrace (enum __ptrace_request __request, ...) __THROW;
other libc's, like e.g., Android's bionic do not -- in that case, the
first parameter is int:
long ptrace(int request, pid_t pid, void * addr, void * data);
So the fix I came up is to make configure/ptrace.m4 also detect the
type of the ptrace's first parameter and defin PTRACE_TYPE_ARG1, as
already does the for parameters 3-4, and then simply wrap ptrace with
a macro that casts the first argument to the detected type. (I'm
leaving adding a nicer wrapper for when we drop building in C).
While this adds the wrapper, GNU/Linux files won't use it until the
next patch, which makes all native GNU/Linux files include
gdb_ptrace.h.
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
__ptrace_request as first parameter type instead of int.
(PTRACE_TYPE_ARG1): Define.
* nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
that casts first argument to PTRACE_TYPE_ARG1.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* config.in: Regenerate.
* configure: Regenerate.
Check for libipt, an Intel(R) Processor Trace decoder library. The sources
can be found on github at:
https://github.com/01org/processor-trace
gdb/
* configure.ac: Check for libipt
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in (LIBIPT): New.
(CLIBS): Add $LIBIPT.
* NEWS: document new configure options
Use kinfo_getvmmap from libutil on FreeBSD to enumerate memory
regions in a running process instead of /proc/<pid>/map. FreeBSD systems
do not mount procfs by default, but kinfo_getvmmap uses a sysctl that
is always available.
Skip memory regions for devices as well as regions an application has
requested to not be dumped via the MAP_NOCORE flag to mmap or
MADV_NOCORE advice to madvise.
gdb/ChangeLog:
* configure.ac: AC_CHECK_LIB(util, kinfo_getvmmap).
* configure: Regenerate.
* config.in: Regenerate.
* fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
define.
(fbsd_find_memory_regions): Use kinfo_getvmmap to
enumerate memory regions if present.
gdb/ChangeLog:
* guile/guile.c (_initialize_guile): Disable automatic
finalization, if Guile offers us that possibility.
* guile/guile.c (call_initialize_gdb_module):
* guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
finalizers in appropriate places.
* config.in (HAVE_GUILE_MANUAL_FINALIZATION): New definition.
* configure.ac (AC_TRY_LIBGUILE): Add a check for
scm_set_automatic_finalization_enabled.
* configure: Regenerated.
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
This patch is to teach both GDB and GDBServer to detect 64-bit inferior
correctly. We find a problem that GDBServer is unable to detect on a
e5500 core processor. Current GDBServer assumes that MSR is a 64-bit
register, but MSR is a 32-bit register in Book III-E. This patch is
to fix this problem by checking the right bit in MSR, in order to handle
both Book III-S and Book III-E. In order to detect Book III-S and
Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by
getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement
the fallback by parsing /proc/self/auxv), because it should an invariant
on the same machine cross different processes.
In order to share code, I add nat/ppc-linux.c for both GDB and
GDBserver side.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (ppc-linux.o): New rule.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
Declare.
* nat/ppc-linux.c: New file.
* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
Call ppc64_64bit_inferior_p.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (SFILES): Add nat/ppc-linux.c.
(ppc-linux.o): New rule.
* configure.srv (powerpc*-*-linux*): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call
ppc64_64bit_inferior_p
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote:
The build on mingw host is broken because mingw has no mkdtemp.
../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir':
../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration]
tempdir_name = mkdtemp (tname);
^
../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror]
tempdir_name = mkdtemp (tname);
^
cc1: all warnings being treated as errors
In the end I have managed to test it by Wine myself:
$ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit
[...]
Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29
29 args.argc = argc;
Could not load libcc1.so: Module not found.
Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll)
then it would soon end up at least on:
default_infcall_mmap:
error (_("This target does not support inferior memory allocation by mmap."));
As currently there is only:
linux-tdep.c:
set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap);
While one could debug Linux targets from MS-Windows host I find it somehow
overcomplicated now when we are trying to get it running at least on native
Linux x86*.
The 'compile' project needs a larger port effort to run on MS-Windows.
gdb/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* compile/compile.c (get_compile_file_tempdir): Call error if
!HAVE_MKDTEMP.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (AC_CHECK_FUNCS): Add mkdtemp.
gdb/testsuite/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
Since lstat gnulib module is imported, we can use it unconditionally.
lstat usage was introduced by this patch
https://sourceware.org/ml/gdb-patches/2012-01/msg00390.html
during the review, it was suggested to import gnulib lstat module, but
we didn't do that.
gdb:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac (AC_CHECK_FUNCS): Remove lstat.
* config.in, configure: Regenerate.
* symfile.c (find_separate_debug_file_by_debuglink): Remove
code checking HAVE_LSTAT is defined.
Since readlink module is imported, we can use it unconditionally.
This patch is to remove configure checks and HAVE_READLINK checks in
code. It was mentioned in the patch below
[RFA/commit] gdbserver: return ENOSYS if readlink not supported.
https://sourceware.org/ml/gdb-patches/2012-02/msg00148.html
to use readlink in gdbserver, but we chose something simple at that
moment.
gdb:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac (AC_CHECK_FUNCS): Remove readlink.
* config.in, configure: Re-generate.
* inf-child.c (inf_child_fileio_readlink): Don't check
HAVE_READLINK is defined.
gdb/gdbserver:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac(AC_CHECK_FUNCS): Remove readlink.
* config.in, configure: Re-generate.
* hostio.c (handle_unlink): Remove code checking HAVE_READLINK
is defined.
The problem here is that if a thread other than gdb's main thread
gets a SIGCHLD (it's an asynchronous signal so the kernel will
essentially pick a random thread) then gdb will hang if it is
in sigsuspend when the SIGCHLD is delivered. The other thread
will see the signal and the sigsuspend won't "wake up".
Guile and libgc should be blocking SIGCHLD in their threads,
but we need to work with Guile 2.0 and libgc 7.4.
The problem first shows up in libgc 7.4 because it is the first
release that enables multiple marker threads by default.
gdb/ChangeLog:
PR 17247
* guile.c: #include <signal.h>.
(_initialize_guile): Block SIGCHLD while initializing Guile.
Replaces the following, which is reverted.
2014-07-26 Doug Evans <xdje42@gmail.com>
PR 17185
* configure.ac: Add check for header gc/gc.h.
Add check for function setenv.
* configure: Regenerate.
* config.in: Regenerate.
* guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
PR 17185 describes a problem with using gdb+guile with libgc 7.4.0.
The symptom is a hang in sigsuspend.
[The thread referenced in the PR has the details.]
It's not clear what the right fix is, or even where the bug is yet.
This patch applies the same workaround Guile has applied.
There is no functionality or real performance loss with this,
and Guile has been using it for awhile.
* configure.ac: Add check for header gc/gc.h.
Add check for function setenv.
* configure: Regenerate.
* config.in: Regenerate.
* guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
This commit wraps calls to the demangler with a segmentation fault
handler. The first time a segmentation fault is caught a core file
is generated and the user is prompted to file a bug and offered the
choice to exit or to continue their GDB session. A maintainence
option is provided to allow the user to disable the crash handler
if required.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check.
* configure: Regenerate.
* config.in: Likewise.
* main.c (signal.h): New include.
(setup_alternate_signal_stack): New function.
(captured_main): Call the above.
* cp-support.c (signal.h): New include.
(catch_demangler_crashes): New flag.
(SIGJMP_BUF): New define.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
(gdb_demangle_jmp_buf): New static global.
(gdb_demangle_attempt_core_dump): Likewise.
(gdb_demangle_signal_handler): New function.
(gdb_demangle): If catch_demangler_crashes is set, install the
above signal handler before calling bfd_demangle, and restore
the original signal handler afterwards. Display the offending
symbol and call demangler_warning the first time a segmentation
fault is caught.
(_initialize_cp_support): New maint set/show command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint set/show catch-demangler-crashes" option.
gdb/
2014-06-01 Ludovic Courtès <ludo@gnu.org>
* configure.ac: When Guile is available, check for the
availability of 'scm_new_smob'.
* configure, config.h.in: Regenerate.
* guile/guile-internal.h (scm_new_smob) [!HAVE_SCM_NEW_SMOB]: New
function.
gdb already unconditionally includes stddef.h in many places.
I think there is no reason to check for its existence.
Also, Zack Weinberg's header file survey agrees:
http://hacks.owlfolio.org/header-survey/
This patch removes the configure check and the inclusion guards.
It also removes a redundant inclusion that I noticed in defs.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't check for stddef.h.
* defs.h: Unconditionally include stddef.h. Remove duplicate
inclusion.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
My grepping around showed that HAVE_MULTIPLE_PROC_FDS is only ever
mentioned in a comment in configure.ac. Since the macro is long dead,
let's remove the last mention.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Remove mentions of HAVE_MULTIPLE_PROC_FDS.
Now that the configury needed for the "common" and "target"
directories is in common.m4, some code in gdb's configure.ac is
redundant.
I ran this script after making an "ID" file using mkid:
sed -n 's/^.*\(HAVE_[A-Z0-9_]*\).*$/\1/p' config.in |
while read x; do
echo ===== $x
gid $x | egrep -v '^(testsuite|gnulib|common|target|gdbserver)/'
done
This finds all the spots using HAVE_ defines, and, more importantly,
makes it clear which defines aren't used in the main parts of gdb.
From this I came up with this patch to remove all the unused bits.
There are a few that are subtly used -- for example the configure
script sometimes checks internal configure cache variables, meaning
some checks cannot be removed.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure, config.in: Rebuild.
* configure.ac: Remove unused configury.
The removal of solib-sunos.c also removed the last user of various
macros defined by configure.
This patch removes the corresponding configure code.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure, config.in: Rebuild.
* configure.ac: Remove all link.h-related checks.
Ulrich Weigand <uweigand@de.ibm.com>
* gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
is defined.
* rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
(rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
(rs6000_ptrace64): Call ptace64 instead of ptracex if present.
* configure.ac: Check for ptrace64.
* configure, config.in: Regenerate.
This simplifies the .gdbinit filename selection logic.
We have a GDBINIT_FILENAME define that supposedly configurations would
override, but none do so. Instead, the only configuration that wants
a different file name instead of ".gdbinit", djgpp, does a strcpy over
the gdbinit global array. This means the array needs to be sized, and
the code that does that is doing the usual
'PATH_MAX/FILENAME_MAX/fallback constant/etc.' mess.
Instead of all that, it's much simpler to have configure specificy the
.gdbinit filename. As bonus, we can then make the "gdbinit" global
array const.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* configure.ac (GDBINIT): Define, depending on host.
* go32-nat.c (init_go32_ops): Don't override gdbinit here.
* top.c (PATH_MAX): Delete fallback definition.
(GDBINIT_FILENAME): Delete.
(gdbinit): Reimplement as const char array set to the GDBINIT
string constant.
* top.h (gdbinit): Make const.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
2013-04-10 Hui Zhu <hui@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* configure.ac: Check libbabeltrace is installed.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in (LIBBABELTRACE): New.
(CLIBS): Add LIBBABELTRACE.
* ctf.c: Include "exec.h".
(CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
(CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
(ctf_save_metadata_header): Define new type aliases in
metadata.
(ctf_write_header): Define event type "tsv_def" and "tp_def"
in metadata. Start a new faked packet for trace status.
(ctf_write_status): Write trace status to CTF.
(ctf_write_uploaded_tsv): Write TSV to CTF.
(ctf_write_uploaded_tp): Write tracepoint definition to CTF.
(ctf_write_definition_end): End the faked packet.
(ctx, ctf_iter, trace_dirname): New.
(start_pos): New variable.
(ctf_destroy, ctf_open_dir, ctf_open): New.
(SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
macros.
(ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
(ctf_fetch_registers, ctf_xfer_partial): New.
(ctf_get_trace_state_variable_value): New.
(ctf_get_tpnum_from_frame_event): New.
(ctf_get_traceframe_address): New.
(ctf_trace_find, ctf_has_stack): New.
(ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
(ctf_get_trace_status, ctf_read_status): New.
(_initialize_ctf): New.
* tracepoint.c (get_tracepoint_number): New
(get_uploaded_tsv): Remove 'static'.
(struct traceframe_info, trace_regblock_size): Move it to ...
* tracepoint.h: ... here.
(get_tracepoint_number): Declare it.
(get_uploaded_tsv): Declare it.
* NEWS: Mention new configure option.
gdb/doc/
2013-04-10 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Trace Files): Add "target ctf".
gdb/testsuite/
2013-04-10 Yao Qi <yao@codesourcery.com>
* gdb.trace/actions.exp: Save trace data to CTF.
Change to ctf target if GDB supports, read CTF data in ctf
target, and check the actions of tracepoints.
* gdb.trace/while-stepping.exp: Likewise.
* gdb.trace/report.exp: Test GDB saves trace data to CTF
format and read CTF trace file if GDB supports.
* gdb.trace/tstatus.exp: Save trace data to CTF. If ctf
target is supported, change to ctf target, read trace data and
check output of command "tstatus".
* gdb.trace/tsv.exp: Save trace frame to CTF. If GDB supports,
read CTF data by target ctf and call check_tsv.
* configure.ac (CC_HAS_LONG_LONG): Replace by AC_MSG_ERROR.
* defs.h (LONGEST, ULONGEST): Remove conditionalization for
CC_HAS_LONG_LONG.
* dwarf2-frame.c (DW64_CIE_ID): Likewise.
* dwarf2read.c (extract_cu_value): Remove the function.
(create_cus_from_index_list): Make the return type void, inline the
extract_cu_value caller, include new gdb_static_assert.
(create_cus_from_index): Make the return type void, update the function
comment, update the create_cus_from_index_list caller.
(create_signatured_type_table_from_index): Make the return type void,
inline the extract_cu_value caller, include new gdb_static_assert.
(dwarf2_read_index): Update the create_cus_from_index and
create_signatured_type_table_from_index caller.
* printcmd.c (ui_printf): Remove conditionalizations for
CC_HAS_LONG_LONG.
* config.in: Regenerate.
* configure: Regenerate.
gdb/doc/
* gdbint.texinfo (Host Definition): Remove CC_HAS_LONG_LONG.
