Adds some MI commands to catch C++ exceptions. The new commands are
-catch-throw, -catch-rethrow, and -catch-catch, these all correspond
to the CLI commands 'catch throw', 'catch rethrow', and 'catch catch'.
Each MI command takes two optional arguments, '-t' has the effect of
calling 'tcatch' instead of 'catch', for example:
(gdb)
-catch-throw -t
Is the same as:
(gdb) tcatch throw
There is also a '-r REGEXP' argument that can supply a regexp to match
against the exception type, so:
(gdb)
-catch-catch -r PATTERN
Is the same as:
(gdb) catch catch PATTERN
The change in print_mention_exception_catchpoint might seem a little
strange; changing the output from using ui_out::field_int and
ui_out::text to using ui_out::message.
The print_mention_exception_catchpoint is used as the 'print_mention'
method for the exception catchpoint breakpoint object. Most of the
other 'print_mention' methods (see breakpoint.c) use either
printf_filtered, of ui_out::message. Using field_int was causing an
unexpected field to be added to the MI output. Here's the output
without the change in print_mention_exception_catchpoint:
(gdb)
-catch-throw
^done,bkptno="1",bkpt={number="1",type="breakpoint",disp="keep",
enabled="y",addr="0x00000000004006c0",
what="exception throw",catch-type="throw",
thread-groups=["i1"],times="0"}
Notice the breakpoint number appears in both the 'bkptno' field, and
the 'number' field within the 'bkpt' tuple. Here's the output with
the change in print_mention_exception_catchpoint:
(gdb)
-catch-throw
^done,bkpt={number="1",type="breakpoint",disp="keep",
enabled="y",addr="0x00000000004006c0",
what="exception throw",catch-type="throw",
thread-groups=["i1"],times="0"}
gdb/ChangeLog:
* NEWS: Mention new MI commands.
* break-catch-throw.c (enum exception_event_kind): Move to
breakpoint.h.
(print_mention_exception_catchpoint): Output text as a single
message.
(catch_exception_command_1): Rename to...
(catch_exception_event): ...this, make non-static, update header
command, and change some parameter types.
(catch_catch_command): Update for changes to
catch_exception_command_1.
(catch_throw_command): Likewise.
(catch_rethrow_command): Likewise.
* breakpoint.c (enum exception_event_kind): Delete.
* breakpoint.h (enum exception_event_kind): Moved here from
break-catch-throw.c.
(catch_exception_event): Declare.
* mi/mi-cmd-catch.c (mi_cmd_catch_exception_event): New function.
(mi_cmd_catch_throw): New function.
(mi_cmd_catch_rethrow): New function.
(mi_cmd_catch_catch): New function.
* mi/mi-cmds.c (mi_cmds): Add 'catch-throw', 'catch-rethrow', and
'catch-catch' entries.
* mi/mi-cmds.h (mi_cmd_catch_throw): Declare.
(mi_cmd_catch_rethrow): Declare.
(mi_cmd_catch_catch): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Catchpoint Commands): Add menu entry to new
node.
(C++ Exception GDB/MI Catchpoint Commands): New node to describe
new MI commands.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-catch-cpp-exceptions.cc: New file.
* gdb.mi/mi-catch-cpp-exceptions.exp: New file.
* lib/mi-support.exp (mi_expect_stop): Handle 'exception-caught'
as a stop reason.
Since commit
b4be1b0648 ("Fix MI output for multi-location breakpoints")
we get this error when building with --disable-gdbmi:
CXXLD gdb
/home/smarchi/src/binutils-gdb/gdb/breakpoint.c:6358: error: undefined reference to 'mi_multi_location_breakpoint_output_fixed(ui_out*)'
This is due to breakpoint.c using a function defined in mi/mi-main.c, even
though mi/mi-main.c isn't included in the build.
To fix it, use the flags feature of ui_out. mi_ui_out has the new
fix_multi_location_breakpoint_output flag set for versions >= 3. Also,
move the global variable fix_multi_location_breakpoint_output to
breakpoint.c, so it can be read there even when we build without MI. I
renamed it to fix_multi_location_breakpoint_output_globally so it
doesn't clash with the new enumerator.
gdb/ChangeLog:
* breakpoint.h (fix_multi_location_breakpoint_output_globally):
New variable declaration.
* breakpoint.c (fix_multi_location_breakpoint_output_globally):
New variable.
(print_one_breakpoint): Use ui_out::test_flags and new global
variable to compute use_fixed_output.
* mi/mi-main.h (mi_multi_location_breakpoint_output_fixed):
Remove.
* mi/mi-main.c (fix_multi_location_breakpoint_output): Remove.
(mi_multi_location_breakpoint_output_fixed): Remove.
(mi_cmd_fix_multi_location_breakpoint_output): Adjust to set the
new variable.
* mi/mi-out.c (mi_ui_out::mi_ui_out): Set
fix_multi_location_breakpoint_output flag if version >= 3.
* ui-out.h (enum ui_out_flag)
<fix_multi_location_breakpoint_output>: New enumerator.
Philippe noticed a memory leak coming from ada_catchpoint_location --
it was not freeing the "function_name" member from its base class:
==14141== 114 bytes in 4 blocks are definitely lost in loss record 1,055 of 3,424
==14141== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==14141== by 0x405107: xmalloc (common-utils.c:44)
==14141== by 0x7563F9: xstrdup (xstrdup.c:34)
==14141== by 0x3B82B3: set_breakpoint_location_function(bp_location*, int) (breakpoint.c:7156)
==14141== by 0x3C112B: add_location_to_breakpoint(breakpoint*, symtab_and_line const*) (breakpoint.c:8609)
==14141== by 0x3C127A: init_raw_breakpoint(breakpoint*, gdbarch*, symtab_and_line, bptype, breakpoint_ops const*) (breakpoint.c:7187)
==14141== by 0x3C1B52: init_ada_exception_breakpoint(breakpoint*, gdbarch*, symtab_and_line, char const*, breakpoint_ops const*, int, int, int) (breakpoint.c:11262)
==14141== by 0x381C2E: create_ada_exception_catchpoint(gdbarch*, ada_exception_catchpoint_kind, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, int, int, int) (ada-lang.c:13255)
This patch fixes the problem by further C++-ifying bp_location. In
particular, bp_location_ops is now removed, and the "dtor" function
pointer is replaced with an ordinary destructor.
gdb/ChangeLog
2019-02-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Tom Tromey <tromey@adacore.com>
* breakpoint.c (~bp_location): Rename from bp_location_dtor.
(bp_location_ops): Remove.
(base_breakpoint_allocate_location): Update.
(free_bp_location): Update.
* ada-lang.c (class ada_catchpoint_location)
<ada_catchpoint_location>: Remove ops parameter.
(ada_catchpoint_location_dtor): Remove.
(ada_catchpoint_location_ops): Remove.
(allocate_location_exception): Update.
* breakpoint.h (struct bp_location_ops): Remove.
(class bp_location) <bp_location>: Remove bp_location_ops
parameter.
<~bp_location>: Add destructor.
<ops>: Remove.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Since commit
56bcdbea2b ("Let gdb.execute handle multi-line commands")
trying to use a command like gdb.execute("show commands") in Python
fails. GDB ends up trying to run the "commands" command.
The reason is that GDB gets confused with the special "commands"
command. In process_next_line, the lookup_cmd_1 function returns the
cmd_list_element representing the "commands" sub-command of "show".
Lower, we check the cmd_list_element to see if it matches various
control commands by name, including the "commands" command. This is
where we wrongfully conclude that the executed command must be
"commands", when in reality it was "show commands".
The fix proposed in this patch removes the comparisons by name, instead
comparing the cmd_list_element object by pointer with the objects
created at initialization time.
Tested on the buildbot, though on a single builder (Fedora-x86_64-m64).
gdb/ChangeLog:
PR python/23669
* breakpoint.c (commands_cmd_element): New.
(_initialize_breakpoint): Assign commands_cmd_element.
* breakpoint.h (commands_cmd_element): New.
* cli/cli-script.c (while_cmd_element, if_command,
define_cmd_element): New.
(command_name_equals): Remove.
(process_next_line): Compare commands by pointer, not by name.
(_initialize_cli_script): Assign the various cmd_list_element
variables.
* compile/compile.c (compile_cmd_element): New.
(_initialize_compile): Assign compile_cmd_element.
* compile/compile.h (compile_cmd_element): New.
* guile/guile.c (guile_cmd_element): New.
(install_gdb_commands): Assign guile_cmd_element.
* guile/guile.h (guile_cmd_element): New.
* python/python.c (python_cmd_element): New.
(_initialize_python): Assign python_cmd_element.
* python/python.h (python_cmd_element): New.
* tracepoint.c (while_stepping_cmd_element): New.
(_initialize_tracepoint): Assign while_stepping_cmd_element.
* tracepoint.h (while_stepping_cmd_element): New.
gdb/testsuite/ChangeLog:
PR python/23669
* gdb.python/python.exp: Test gdb.execute("show commands").
This changes moribund_locations to use a std::vector rather than VEC.
I also noticed that moribund_locations is only used in breakpoint.c,
so now it is static as well.
It might be possible to make this code a bit simpler by using a
ref_ptr in moribund_locations; however, I have not done this.
Tested by the buildbot.
gdb/ChangeLog
2018-07-10 Tom Tromey <tom@tromey.com>
* breakpoint.c (moribund_locations): Now static and a
std::vector.
(breakpoint_init_inferior, moribund_breakpoint_here_p)
(build_bpstat_chain, update_global_location_list)
(breakpoint_retire_moribund): Update.
* breakpoint.h (bp_location_p): Remove typedef. Don't declare
VEC.
This removes a use of VEC from breakpoint.h, also removing the
now-unnecessary breakpoint_p typedef.
This patch fixes a latent memory leak in
find_matching_tracepoint_location, which neglected to free the vector
returned by all_tracepoints.
Tested by the buildbot.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* tracepoint.c (process_tracepoint_on_disconnect, start_tracing)
(stop_tracing, tstatus_command)
(find_matching_tracepoint_location, merge_uploaded_tracepoints)
(print_one_static_tracepoint_marker): Update.
* breakpoint.c (static_tracepoints_here, all_tracepoints): Return
std::vector.
* breakpoint.h (breakpoint_p): Remove typedef. Don't declare
VEC.
(all_tracepoints, static_tracepoints_here): Return std::vector.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
This patch essentially causes GDB to treat inlined frames like "normal"
frames from the user's perspective. This means, for example, that when a
user sets a breakpoint in an inlined function, GDB will now actually stop
"in" that function.
Using the test case from breakpoints/17534,
3 static inline void NVIC_EnableIRQ(int IRQn)
4 {
5 volatile int y;
6 y = IRQn;
7 }
8
9 __attribute__( ( always_inline ) ) static inline void __WFI(void)
10 {
11 __asm volatile ("nop");
12 }
13
14 int main(void) {
15
16 x= 42;
17
18 if (x)
19 NVIC_EnableIRQ(16);
20 else
21 NVIC_EnableIRQ(18);
(gdb) b NVIC_EnableIRQ
Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations)
(gdb) r
Starting program: 17534
Breakpoint 1, main () at 17534.c:19
19 NVIC_EnableIRQ(16);
Because skip_inline_frames currently skips every inlined frame, GDB "stops"
in the caller. This patch adds a new parameter to skip_inline_frames
that allows us to pass in a bpstat stop chain. The breakpoint locations
on the stop chain can be used to determine if we've stopped inside an inline
function (due to a user breakpoint). If we have, we do not elide the frame.
With this patch, GDB now reports that the inferior has stopped inside the
inlined function:
(gdb) r
Starting program: 17534
Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6
6 y = IRQn;
Many thanks to Jan and Pedro for guidance on this.
gdb/ChangeLog:
* breakpoint.c (build_bpstat_chain): New function, moved from
bpstat_stop_status.
(bpstat_stop_status): Add optional parameter, `stop_chain'.
If no stop chain is passed, call build_bpstat_chain to build it.
* breakpoint.h (build_bpstat_chain): Declare.
(bpstat_stop_status): Move documentation here from breakpoint.c.
* infrun.c (handle_signal_stop): Before eliding inlined frames,
build the stop chain and pass it to skip_inline_frames.
Pass this stop chain to bpstat_stop_status.
* inline-frame.c: Include breakpoint.h.
(stopped_by_user_bp_inline_frame): New function.
(skip_inline_frames): Add parameter `stop_chain'.
Move documention to inline-frame.h.
If non-NULL, use stopped_by_user_bp_inline_frame to determine
whether the frame should be elided.
* inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
Add moved documentation and update for new parameter.
gdb/testsuite/ChangeLog:
* gdb.ada/bp_inlined_func.exp: Update inlined frame locations
in expected breakpoint stop locations.
* gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
move to proper scope to test variable values.
* gdb.opt/inline-break.c (inline_func1, not_inline_func1)
(inline_func2, not_inline_func2, inline_func3, not_inline_func3):
New functions.
(main): Call not_inline_func3.
* gdb.opt/inline-break.exp: Start inferior and set breakpoints at
inline_func1, inline_func2, and inline_func3. Test that when each
breakpoint is hit, GDB properly reports both the stop location
and the backtrace. Repeat tests for temporary breakpoints.
This changes some functions in cli-script.c to use function_view
rather than a function pointer and closure argument. This simplifies
the code a bit and is useful in a subsequent patch.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* mi/mi-cmd-break.c (mi_command_line_array)
(mi_command_line_array_cnt, mi_command_line_array_ptr)
(mi_read_next_line): Remove.
(mi_cmd_break_commands): Update.
* cli/cli-script.h (read_command_lines, read_command_lines_1): Use
function_view.
* cli/cli-script.c (get_command_line): Update.
(process_next_line): Use function_view. Constify.
(recurse_read_control_structure, read_command_lines)
(read_command_lines_1): Change argument types to function_view.
(do_define_command, document_command): Update.
* breakpoint.h (check_tracepoint_command): Don't declare.
* breakpoint.c (check_tracepoint_command): Remove.
(commands_command_1, create_tracepoint_from_upload): Update.
Currently command lines are reference counted using shared_ptr only
when attached to breakpoints. This patch changes gdb to use
shared_ptr in commands as well. This allows for the removal of
copy_command_lines.
Note that the change to execute_user_command explicitly makes a new
reference to the command line. This will be used in a later patch.
This simplifies struct command_line based on the observation that a
given command can have at most two child bodies: an "if" can have both
"then" and "else" parts. Perhaps the names I've chosen for the
replacements here are not very good -- your input requested.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (all_tracepoint_actions): Rename from
all_tracepoint_actions_and_cleanup. Change return type.
(actions_command, encode_actions_1, encode_actions)
(trace_dump_actions, tdump_command): Update.
* remote.c (remote_download_command_source): Update.
* python/python.c (gdbpy_eval_from_control_command)
(python_command, python_interactive_command): Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command)
(gdbscm_eval_from_control_command, guile_command): Update.
* compile/compile.c (compile_code_command)
(compile_print_command, compile_to_object): Update.
* cli/cli-script.h (struct command_lines_deleter): New.
(counted_command_line): New typedef.
(struct command_line): Add constructor, destructor.
<body_list>: Remove.
<body_list_0, body_list_1>: New members.
(command_line_up): Remove typedef.
(read_command_lines, read_command_lines_1, get_command_line):
Update.
(copy_command_lines): Don't declare.
* cli/cli-script.c (build_command_line): Use "new".
(get_command_line): Return counted_command_line.
(print_command_lines, execute_user_command)
(execute_control_command_1, while_command, if_command): Update.
(realloc_body_list): Remove.
(process_next_line, recurse_read_control_structure): Update.
(read_command_lines, read_command_lines_1): Return counted_command_line.
(free_command_lines): Use "delete".
(copy_command_lines): Remove.
(define_command, document_command, show_user_1): Update.
* cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now
a counted_command_line.
* breakpoint.h (counted_command_line): Remove typedef.
(breakpoint_set_commands): Update.
* breakpoint.c (check_no_tracepoint_commands)
(validate_commands_for_breakpoint): Update.
(breakpoint_set_commands): Change commands to be a
counted_command_line.
(commands_command_1, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
This fixes setting breakpoints on ifunc functions by name after the
ifunc has already been resolved.
In that case, if you have debug info for the ifunc resolver, without
the fix, then gdb puts a breakpoint past the prologue of the resolver,
instead of setting a breakpoint at the ifunc target:
break gnu_ifunc
Breakpoint 4 at 0x7ffff7bd36f2: file src/gdb/testsuite/gdb.base/gnu-ifunc-lib.c, line 34.
(gdb) continue
Continuing.
[Inferior 1 (process 13300) exited normally]
(gdb)
above we should have stopped at "final", but didn't because we never
resolved the ifunc to the final location.
If you don't have debug info for the resolver, GDB manages to resolve
the ifunc target, but, it should be setting a breakpoint after the
prologue of the final function, and instead what you get is that GDB
sets a breakpoint on the first address of the target function. With
the gnu-ifunc.exp tests added by a later patch, we get, without the
fix:
(gdb) break gnu_ifunc
Breakpoint 4 at 0x400753
(gdb) continue
Continuing.
Breakpoint 4, final (arg=1) at src/gdb/testsuite/gdb.base/gnu-ifunc-final.c:20
20 {
vs, fixed:
(gdb) break gnu_ifunc
Breakpoint 4 at 0x40075a: file src/gdb/testsuite/gdb.base/gnu-ifunc-final.c, line 21.
(gdb) continue
Continuing.
Breakpoint 4, final (arg=2) at src/gdb/testsuite/gdb.base/gnu-ifunc-final.c:21
21 return arg + 1;
(gdb)
Fix the problems above by moving the ifunc target resolving to
linespec.c, before we skip a function's prologue. We need to save
something in the sal, so that set_breakpoint_location_function knows
that it needs to create a bp_gnu_ifunc_resolver bp_location. Might as
well just save a pointer to the minsym.
gdb/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* breakpoint.c (set_breakpoint_location_function): Don't resolve
ifunc targets here. Instead, if we have an ifunc minsym, use its
address/name.
(add_location_to_breakpoint): Store the minsym and the objfile in
the breakpoint location.
* breakpoint.h (bp_location) <msymbol, objfile>: New fields.
* linespec.c (minsym_found): Resolve GNU ifunc targets here.
Record the minsym in the sal.
* symtab.h (symtab_and_line) <msymbol>: New field.
Now that value_ref_ptr exists, it is possible to simplify breakpoint
and bpstat memory management by using a value_ref_ptr rather than
manually handling the reference counts.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* value.c (release_value): Update.
* breakpoint.h (struct watchpoint) <val>: Now a value_ref_ptr.
(struct bpstats) <val>: Now a value_ref_ptr.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, print_it_watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
This patch replaces VEC(static_tracepoint_marker_p) with std::vector,
and does some c++ification around that. I thought a new overload of
hex2str was useful, so I added it as well as corresponding unit tests.
I also added an overload of ui_out::field_string that takes an
std::string directly.
gdb/ChangeLog:
* tracepoint.h (struct static_tracepoint_marker): Initialize
fields, define default constructor, move constructor and move
assignment, disable the rest.
<str_id, extra>: Make std::string.
(release_static_tracepoint_marker): Remove.
(free_current_marker): Remove.
* tracepoint.c (free_current_marker): Remove.
(parse_static_tracepoint_marker_definition): Adjust to
std::string, use new hex2str overload.
(release_static_tracepoint_marker): Remove.
(print_one_static_tracepoint_marker): Get marker by reference
and adjust to std::string.
(info_static_tracepoint_markers_command): Adjust to std::vector
changes
* target.h (static_tracepoint_marker_p): Remove typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): Remove.
(struct target_ops) <to_static_tracepoint_marker_at>: Return
bool.
<to_static_tracepoint_markers_by_strid>: Return std::vector.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
(target_debug_print_std_vector_static_tracepoint_marker): New.
(target_debug_print_struct_static_tracepoint_marker_p): Rename
to...
(target_debug_print_static_tracepoint_marker_p): ... this.
* target-delegates.c: Re-generate.
* breakpoint.h (struct tracepoint) <static_trace_marker_id>:
Make std::string.
* breakpoint.c (init_breakpoint_sal): Adjust to std::string.
(decode_static_tracepoint_spec): Adjust to std::vector.
(tracepoint_print_one_detail): Adjust to std::string.
(strace_marker_decode_location): Adjust to std::string.
(update_static_tracepoint): Adjust to std::string, remove call
to release_static_tracepoint_marker.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Adjust to std::vector.
* remote.c (remote_static_tracepoint_marker_at): Return bool.
(remote_static_tracepoint_markers_by_strid): Adjust to
std::vector.
* common/rsp-low.h (hex2str): New overload with explicit count
of bytes.
* common/rsp-low.c (hex2str): New overload with explicit count
of bytes.
* unittests/rsp-low-selftests.c (test_hex2str): New function.
(_initialize_rsp_low_selftests): Add test_hex2str test.
* unittests/tracepoint-selftests.c
(test_parse_static_tracepoint_marker_definition): Adjust to
std::string.
This introduces gdb_breakpoint_up, a unique_ptr typedef that owns a
breakpoint. It then changes set_momentary_breakpoint to return a
gdb_breakpoint_up and fixes up the fallout. This then allows the
removal of make_cleanup_delete_breakpoint.
Once breakpoints are fully C++-ified, this typedef can be removed in
favor of a plain std::unique_ptr.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* breakpoint.c (set_momentary_breakpoint): Return
breakpoint_up.
(until_break_command): Update.
(new_until_break_fsm): Change argument types to
breakpoint_up.
(set_momentary_breakpoint_at_pc): Return breakpoint_up.
(do_delete_breakpoint_cleanup, make_cleanup_delete_breakpoint):
Remove.
* infcmd.c (finish_forward): Update.
* breakpoint.h (set_momentary_breakpoint)
(set_momentary_breakpoint_at_pc): Return breakpoint_up.
(make_cleanup_delete_breakpoint): Remove.
(struct breakpoint_deleter): New.
(breakpoint_up): New typedef.
* infrun.c (insert_step_resume_breakpoint_at_sal_1): Update.
(insert_exception_resume_breakpoint): Update.
(insert_exception_resume_from_probe): Update.
(insert_longjmp_resume_breakpoint): Update.
* arm-linux-tdep.c (arm_linux_copy_svc): Update.
* elfread.c (elf_gnu_ifunc_resolver_stop): Update.
* infcall.c (call_function_by_hand_dummy): Update
This replaces start_rbreak_breakpoints and end_rbreak_breakpoints with
a new scoped class. This allows the removal of a cleanup.
This also fixes an earlier memory leak regression, by changing
"string" to be a std::string.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* breakpoint.c
(scoped_rbreak_breakpoints::scoped_rbreak_breakpoints): Rename
from start_rbreak_breakpoints.
(scoped_rbreak_breakpoints): Rename from end_rbreak_breakpoints.
* breakpoint.h (class scoped_rbreak_breakpoints): New.
(start_rbreak_breakpoints, end_rbreak_breakpoints): Remove.
* symtab.c (do_end_rbreak_breakpoints): Remove.
(rbreak_command): Use scoped_rbreak_breakpoints, std::string.
Currently, "info break" can show some (perhaps) unexpected results when
setting a breakpoint on an inlined function:
(gdb) list
1 #include <stdio.h>
2
3 static inline void foo()
4 {
5 printf("Hello world\n");
6 }
7
8 int main()
9 {
10 foo();
11 return 0;
12 }
13
(gdb) b foo
Breakpoint 1 at 0x400434: file foo.c, line 5.
(gdb) i b
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000400434 in main at foo.c:5
GDB reported that we understood what "foo" was, but we then report that the
breakpoint is actually set in main. While that is literally true, we can
do a little better.
This is accomplished by copying the symbol for which the breakpoint was set
into the bp_location. From there, print_breakpoint_location can use this
information to print out symbol information (if available) instead of calling
find_pc_sect_function.
With the patch installed,
(gdb) i b
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000400434 in foo at foo.c:5
gdb/ChangeLog:
* breakpoint.c (print_breakpoint_location): Use the symbol saved
in the bp_location, falling back to find_pc_sect_function when
needed.
(add_location_to_breakpoint): Save sal->symbol.
* breakpoint.h (struct bp_location) <symbol>: New field.
* symtab.c (find_function_start_sal): Save the symbol into the SaL.
* symtab.h (struct symtab_and_line) <symbol>: New field.
gdb/testsuite/ChangeLog:
* gdb.opt/inline-break.exp (break_info_1): New procedure.
Test "info break" for every inlined function breakpoint.
There is no regular_breakpoint_inserted_here_p definition at all, so
this patch removes the declaration.
gdb:
2017-10-26 Yao Qi <yao.qi@linaro.org>
* breakpoint.h (regular_breakpoint_inserted_here_p): Remove.
This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays. This results in a good number of simplifications.
(I checked that Insight doesn't use those functions.)
The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.
I.e., before:
-thread-select 123456789
&"Thread ID 123456789 not known.\n"
^error,msg="Thread ID 123456789 not known."
(gdb)
After:
-thread-select 123456789
^error,msg="Thread ID 123456789 not known."
(gdb)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here. Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type. Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.
gdb/testsuite/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.
This also makes delete_command static; but now I wonder if it is used
in Insight and should not be touched.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* breakpoint.h (delete_command): Don't declare.
* breakpoint.c (delete_command, enable_once_command)
(enable_count_command, enable_delete_command, breakpoint_1)
(maintenance_info_breakpoints, stopin_command, stopat_command)
(delete_command, delete_trace_command, save_breakpoints)
(save_breakpoints_command, save_tracepoints_command): Constify.
This changes counted_command_line to be a typedef for std::shared_ptr
and removes the associated cleanups. In the long run I believe that
cmd_list_element should also be changed to use a shared_ptr.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* breakpoint.c (struct counted_command_line): Remove.
(breakpoint_commands): Update.
(alloc_counted_command_line, incref_counted_command_line)
(decref_counted_command_line, do_cleanup_counted_command_line)
(make_cleanup_decref_counted_command_line): Remove.
(breakpoint_set_commands, commands_command_1, ~bpstats, bpstats)
(bpstat_clear_actions, bpstat_do_actions_1, watchpoint_check)
(bpstat_stop_status, print_one_breakpoint_location, ~breakpoint)
(save_breakpoints): Update.
* breakpoint.h (counted_command_line): Now a typedef to
shared_ptr.
(struct breakpoint) <commands>: Now a counted_command_line.
(struct bpstats) <command>: Likewise.
This changes struct bpstats to be allocated with new and freed with
delete, adding constructors and a destructor in the process. This
allows the removal of one cleanup and clears the way for more to
follow.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* breakpoint.c (~bpstats): Rename from bpstat_free. Update.
(bpstat_clear): Use delete.
(bpstats): New constructors.
(bpstat_copy, bpstat_stop_status): Use new.
(dprintf_after_condition_true): Update.
* breakpoint.h (bpstats::bpstats): Add constructors.
(bpstats::~bpstats): Add destructor.
I think it would make more sense if the types and function declarations
related to command lines were in cli-script.h rather than defs.h, since
the related function definitions are in cli-script.c.
I had to add a few includes here and there. I also had to rename the
"lines" parameter of command_lines_deleter::operator(), because ncurses
has a "#define lines ..." that was interfering when cli-script.h is
included by some TUI source files that also include ncurses header files.
gdb/ChangeLog:
* cli/cli-script.h (enum misc_command_type): Move from defs.h.
(enum command_control_type): Likewise.
(struct command_line): Likewise.
(free_command_lines): Likewise.
(struct command_lines_deleter): Likewise.
(command_line_up): Likewise.
(read_command_lines): Likewise.
(read_command_lines_1): Likewise.
* defs.h (enum misc_command_type): Move to cli/cli-script.h.
(enum command_control_type): Likewise.
(struct command_line): Likewise.
(free_command_lines): Likewise.
(struct command_lines_deleter): Likewise.
(command_line_up): Likewise.
(read_command_lines): Likewise.
(read_command_lines_1): Likewise.
* breakpoint.h: Include cli/cli-script.h.
* extension-priv.h: Likewise.
* gdbcmd.h: Likewise.
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
This changes install_breakpoint to take a std::unique_ptr rvalue-ref
argument. This makes it clear that install_breakpoint takes ownership
of the pointer, and prevents bugs like the one fixed by the previous
patch.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* breakpoint.h (install_breakpoint): Update.
* breakpoint.c (add_solib_catchpoint): Update.
(install_breakpoint): Change argument to a std::unique_ptr.
(create_fork_vfork_event_catchpoint): Use std::unique_ptr.
(create_breakpoint_sal, create_breakpoint): Update.
(watch_command_1, catch_exec_command_1)
(strace_marker_create_breakpoints_sal): Use std::unique_ptr.
(add_to_breakpoint_chain): Change argument to a std::unique_ptr.
Return the breakpoint.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(new_single_step_breakpoint): Update.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use
std::unique_ptr.
* break-catch-syscall.c (create_syscall_event_catchpoint): Use
std::unique_ptr.
* break-catch-sig.c (create_signal_catchpoint): Use
std::unique_ptr.
* ada-lang.c (create_ada_exception_catchpoint): Use
std::unique_ptr.
The problem is that b->extra_string is free'ed twice: Once in the
breakpoint's dtor, and another time via make_cleanup (xfree).
This patch gets rid of the cleanups, fixing the problem.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2017-06-06 Pedro Alves <palves@redhat.com>
PR breakpoints/21553
* breakpoint.c (create_breakpoints_sal_default)
(init_breakpoint_sal, create_breakpoint_sal): Use
gdb::unique_xmalloc_ptr for string parameters.
(create_breakpoint): Constify 'extra_string' and 'cond_string'
parameters. Replace cleanups with gdb::unique_xmalloc_ptr.
(base_breakpoint_create_breakpoints_sal)
(bkpt_create_breakpoints_sal, tracepoint_create_breakpoints_sal)
(strace_marker_create_breakpoints_sal)
(create_breakpoints_sal_default): Use gdb::unique_xmalloc_ptr for
string parameters.
* breakpoint.h (breakpoint_ops::create_breakpoints_sal): Use
gdb::unique_xmalloc_ptr for string parameters.
(create_breakpoint): Constify 'extra_string' and 'cond_string'
parameters.
Breakpoints are currently in a limbo state between C and C++. There is
a pseudo class hierarchy implemented using struct fields. Taking
watchpoint as an example:
struct watchpoint
{
/* The base class. */
struct breakpoint base;
...
}
and it is instantianted with "new watchpoint ()". When destroyed, a
destructor is first invoked through the breakpoint_ops, and then the
memory is freed by calling delete through a pointer to breakpoint.
Address sanitizer complains about this, for example, because we new and
delete the same memory using different types.
This patch takes the logical step of making breakpoint subclasses extend
the breakpoint class for real, and converts their destructors to actual
C++ destructors.
Regtested on the buildbot.
gdb/ChangeLog:
* breakpoint.h (struct breakpoint_ops) <dtor>: Remove.
(struct breakpoint) <~breakpoint>: New.
(struct watchpoint): Inherit from breakpoint.
<~watchpoint>: New.
<base>: Remove.
(struct tracepoint): Inherit from breakpoint.
<base>: Remove.
* breakpoint.c (longjmp_breakpoint_ops): Remove.
(struct longjmp_breakpoint): Inherit from breakpoint.
<~longjmp_breakpoint>: New.
<base>: Remove.
(new_breakpoint_from_type): Remove casts.
(watchpoint_in_thread_scope): Remove reference to base field.
(watchpoint_del_at_next_stop): Likewise.
(update_watchpoint): Likewise.
(watchpoint_check): Likewise.
(bpstat_check_watchpoint): Likewise.
(set_longjmp_breakpoint): Likewise.
(struct fork_catchpoint): Inherit from breakpoint.
<base>: Remove.
(struct solib_catchpoint): Inherit from breakpoint.
<~solib_catchpoint>: New.
<base>: Remove.
(dtor_catch_solib): Change to ...
(solib_catchpoint::~solib_catchpoint): ... this.
(breakpoint_hit_catch_solib): Remove reference to base field.
(add_solib_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(struct exec_catchpoint): Inherit from breakpoint.
<~exec_catchpoint>: New.
<base>: Remove.
(dtor_catch_exec): Change to ...
(exec_catchpoint::~exec_catchpoint): ... this.
(dtor_watchpoint): Change to ...
(watchpoint::~watchpoint): ... this.
(watch_command_1): Remove reference to base field.
(catch_exec_command_1): Likewise.
(base_breakpoint_dtor): Change to ...
(breakpoint::~breakpoint): ... this.
(base_breakpoint_ops): Remove dtor field value.
(longjmp_bkpt_dtor): Change to ...
(longjmp_breakpoint::~longjmp_breakpoint): ... this.
(strace_marker_create_breakpoints_sal): Remove reference to base
field.
(delete_breakpoint): Don't manually call breakpoint destructor.
(create_tracepoint_from_upload): Remove reference to base field.
(trace_pass_set_count): Likewise.
(initialize_breakpoint_ops): Don't initialize
momentary_breakpoint_ops, don't set dtors.
* ada-lang.c (struct ada_catchpoint): Inherit from breakpoint.
<~ada_catchpoint>: New.
<base>: Remove.
(create_excep_cond_exprs): Remove reference to base field.
(dtor_exception): Change to ...
(ada_catchpoint::~ada_catchpoint): ... this.
(dtor_catch_exception): Remove.
(dtor_catch_exception_unhandled): Remove.
(dtor_catch_assert): Remove.
(create_ada_exception_catchpoint): Remove reference to base
field.
(initialize_ada_catchpoint_ops): Don't set dtors.
* break-catch-sig.c (struct signal_catchpoint): Inherit from
breakpoint.
<~signal_catchpoint>: New.
<base>: Remove.
(signal_catchpoint_dtor): Change to ...
(signal_catchpoint::~signal_catchpoint): ... this.
(create_signal_catchpoint): Remove reference to base field.
(initialize_signal_catchpoint_ops): Don't set dtor.
* break-catch-syscall.c (struct syscall_catchpoint): Inherit
from breakpoint.
<~syscall_catchpoint>: New.
<base>: Remove.
(dtor_catch_syscall): Change to ...
(syscall_catchpoint::~syscall_catchpoint): ... this.
(create_syscall_event_catchpoint): Remove reference to base
field.
(initialize_syscall_catchpoint_ops): Don't set dtor.
* break-catch-throw.c (struct exception_catchpoint): Inherit
from breakpoint.
<~exception_catchpoint>: New.
<base>: Remove.
(dtor_exception_catchpoint): Change to ...
(exception_catchpoint::~exception_catchpoint): ... this.
(handle_gnu_v3_exceptions): Remove reference to base field.
(initialize_throw_catchpoint_ops): Don't set dtor.
* ctf.c (ctf_get_traceframe_address): Remove reference to base
field.
* remote.c (remote_get_tracepoint_status): Likewise.
* tracefile-tfile.c (tfile_get_traceframe_address): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (actions_command): Likewise.
(validate_actionline): Likewise.
(tfind_1): Likewise.
(get_traceframe_location): Likewise.
(find_matching_tracepoint_location): Likewise.
(parse_tracepoint_status): Likewise.
* mi/mi-cmd-break.c (mi_cmd_break_passcount): Likewise.
Eh, struct breakpoint was made non-POD just today, with commit
d28cd78ad8 ("Change breakpoint event locations to
event_location_up"). :-)
src/gdb/breakpoint.c: In function ‘void init_raw_breakpoint_without_location(breakpoint*, gdbarch*, bptype, const breakpoint_ops*)’:
src/gdb/breakpoint.c:7447:28: error: use of deleted function ‘void* memset(T*, int, size_t) [with T = breakpoint; <template-parameter-1-2> = void; size_t = long unsigned int]’
memset (b, 0, sizeof (*b));
^
In file included from src/gdb/common/common-defs.h:85:0,
from src/gdb/defs.h:28,
from src/gdb/breakpoint.c:20:
src/gdb/common/poison.h:56:7: note: declared here
void *memset (T *s, int c, size_t n) = delete;
^
gdb/ChangeLog:
2017-04-25 Pedro Alves <palves@redhat.com>
* breakpoint.h (struct breakpoint): In-class initialize all
fields. Make boolean fields "bool".
* breakpoint.c (init_raw_breakpoint_without_location): Remove
memset call and initializations no longer necessary.
struct bp_location is not a POD, so we shouldn't be using memset to
initialize it.
Caught like this:
src/gdb/breakpoint.c: In function ‘bp_location** get_first_locp_gte_addr(CORE_ADDR)’:
src/gdb/breakpoint.c:950:53: error: use of deleted function ‘void* memset(T*, int, size_t) [with T = bp_location; <template-parameter-1-2> = void; size_t = long unsigned int]’
memset (&dummy_loc, 0, sizeof (struct bp_location));
^
In file included from src/gdb/defs.h:28:0,
from src/gdb/breakpoint.c:20:
src/gdb/common/common-defs.h:126:7: note: declared here
void *memset (T *s, int c, size_t n) = delete;
^
gdb/ChangeLog:
2017-04-25 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_catchpoint_location): Now a "class". Remove
"base" field and inherit from "bp_location" instead. Add
non-default ctor.
(allocate_location_exception): Use new non-default ctor.
* breakpoint.c (get_first_locp_gte_addr): Remove memset call.
(init_bp_location): Convert to ...
(bp_location::bp_location): ... this new ctor, and remove memset
call.
(base_breakpoint_allocate_location): Use the new non-default ctor.
* breakpoint.h (bp_location): Now a class. Declare default and
non-default ctors. In-class initialize all members.
(init_bp_location): Remove declaration.
I'm going to need to touch all these fields to add in-class
initialization anyway, might as well take the opportunity to finally
fix this...
gdb/ChangeLog:
2017-04-13 Pedro Alves <palves@redhat.com>
* breakpoint.h (struct breakpoint): Reindent.
This is a follow-up to an earlier patch. It changes breakpoint's
location and location_range_end members to be of type
event_location_up, then fixes up the users.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_download_tracepoint): Update.
* python/py-breakpoint.c (bppy_get_location): Update.
* guile/scm-breakpoint.c (bpscm_print_breakpoint_smob)
(gdbscm_breakpoint_location): Update.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Update.
* breakpoint.h (struct breakpoint) <location, location_range_end>:
Change type to event_location_up.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint)
(breakpoint_event_location_empty_p, print_breakpoint_location)
(print_one_breakpoint_location, create_thread_event_breakpoint)
(init_breakpoint_sal, create_breakpoint)
(print_recreate_ranged_breakpoint, break_range_command)
(init_ada_exception_breakpoint, say_where): Update.
(base_breakpoint_dtor): Don't call delete_event_location.
(bkpt_print_recreate, tracepoint_print_recreate)
(dprintf_print_recreate, update_static_tracepoint)
(breakpoint_re_set_default): Update.
This introduces command_line_up, a unique_ptr for command_line
objects, and changes many places to use it. This removes a number of
cleanups.
Command lines are funny in that sometimes they are reference counted.
Once there is more C++-ification of some of the users, perhaps all of
these can be changed to use shared_ptr instead.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* python/python.c (python_command, python_interactive_command):
Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command): Update.
* defs.h (read_command_lines, read_command_lines_1): Return
command_line_up.
(command_lines_deleter): New struct.
(command_line_up): New typedef.
* compile/compile.c (compile_code_command)
(compile_print_command): Update.
* cli/cli-script.h (get_command_line, copy_command_lines): Return
command_line_up.
(make_cleanup_free_command_lines): Remove.
* cli/cli-script.c (get_command_line, read_command_lines_1)
(copy_command_lines): Return command_line_up.
(while_command, if_command, read_command_lines, define_command)
(document_command): Update.
(do_free_command_lines_cleanup, make_cleanup_free_command_lines):
Remove.
* breakpoint.h (breakpoint_set_commands): Change type of
"commands".
* breakpoint.c (breakpoint_set_commands): Change type of
"commands". Update.
(do_map_commands_command, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
The main motivation here is avoiding having to write a couple casts
like these:
if (!arg)
- arg = "";
+ arg = (char *) "";
in catch_exception_command_1 and catch_exec_command_1.
That requires making ep_parse_optional_if_clause and
check_for_argument take pointers to const strings. I then tried
propagating the resulting constification all the way, but that was
spiraling out of control, so instead I settled for keeping const and
non-const overloads.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* break-catch-throw.c (handle_gnu_v3_exceptions): Constify
'cond_string' parameter.
(extract_exception_regexp): Constify 'string' parameter.
(catch_exception_command_1): Constify.
* breakpoint.c (init_catchpoint)
(create_fork_vfork_event_catchpoint): Constify 'cond_string'
parameter.
(ep_parse_optional_if_clause, catch_fork_command_1)
(catch_exec_command_1): Constify.
* breakpoint.h (init_catchpoint): Constify 'cond_string'
parameter.
(ep_parse_optional_if_clause): Constify.
* cli/cli-utils.c (remove_trailing_whitespace)
(check_for_argument): Constify.
* cli/cli-utils.h (remove_trailing_whitespace): Constify and add
non-const overload.
(check_for_argument): Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
After the previous patch, we end up with these two types with quite
similar, and potentially confusing names:
typedef gdb::unique_ptr<agent_expr> agent_expr_up;
/* Pointer to an agent_expr structure. */
typedef struct agent_expr *agent_expr_p;
The latter is only necessary to put agent_expr pointers in VECs. So
just eliminate it and use std::vector instead.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ax.h (agent_expr_p): Delete.
(DEF_VEC_P (agent_expr_p)): Delete.
* breakpoint.c (build_target_condition_list)
(build_target_command_list): Adjust to use of std::vector.
(bp_location_dtor): Remove now unnecessary VEC_free calls.
* breakpoint.h: Include <vector>.
(struct bp_target_info) <conditions, tcommands>: Now
std::vector's.
* remote.c (remote_add_target_side_condition): bp_tgt->conditions
is now a std::vector; adjust.
(remote_add_target_side_commands, remote_insert_breakpoint):
bp_tgt->tcommands is now a std::vector; adjust.
This patch makes the gen_* functions return a unique_ptr instead of
raw pointer:
typedef gdb::unique_ptr<agent_expr> agent_expr_up;
and then adjusts the codebase throughout to stop using
make_cleanup_free_agent_expr.
The cond_bytecode and cmd_bytecode fields of struct bp_location are
owning pointers, so they're changed to be unique_ptr's instead of raw
pointers.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ax-gdb.c (is_nontrivial_conversion): Use agent_expr_up.
(gen_trace_for_var, gen_trace_for_expr, gen_eval_for_expr)
(gen_trace_for_return_address, gen_printf): Use and return an
agent_expr_up. Don't use make_cleanup_free_agent_expr.
(agent_eval_command_one, maint_agent_printf_command): Use
agent_expr_up. Don't use make_cleanup_free_agent_expr.
* ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
(gen_trace_for_return_address, gen_eval_for_expr, gen_printf): Use
agent_expr_up.
* ax-general.c (new_agent_expr): Rename to ...
(agent_expr::agent_expr): ... this, and now a constructor.
(free_agent_expr): Rename to ...
(agent_expr::~agent_exp): ... this, and now a destructor.
(do_free_agent_expr_cleanup, make_cleanup_free_agent_expr):
Delete.
* ax.h (struct agent_expr): Add ctor/dtor.
(agent_expr_up): New typedef.
(new_agent_expr, free_agent_expr, make_cleanup_free_agent_expr):
Delete declarations.
* breakpoint.c (parse_cond_to_aexpr): Use and return an
agent_expr_up. Don't use make_cleanup_free_agent_expr.
(build_target_condition_list): Adjust to use agent_expr_up.
(parse_cmd_to_aexpr): Use and return an agent_expr_up. Don't use
make_cleanup_free_agent_expr.
(build_target_command_list): Adjust to use agent_expr_up.
(force_breakpoint_reinsertion): Adjust to use agent_expr_up.
(bp_location_dtor): Remove unnecessary free_agent_expr and xfree
calls.
* breakpoint.h (struct bp_target_info) <cond_bytecode,
cmd_bytecode>: Now agent_expr_up's.
* remote.c (remote_download_tracepoint): Adjust to use
agent_expr_up and remove use of make_cleanup_free_agent_expr.
* tracepoint.c (validate_actionline, collect_symbol): Adjust to
use agent_expr_up and remove uses of make_cleanup_free_agent_expr.
(collection_list::~collection_list): Call delete instead of
free_agent_expr.
(encode_actions_1): Adjust to use agent_expr_up and remove uses of
make_cleanup_free_agent_expr.
(add_aexpr): Change parameter type to agent_expr_up; Return a raw
agent_expr pointer.
This patch makes parse_expression and friends return a unique_ptr
instead of raw pointer [1]:
typedef gdb::unique_malloc_ptr<expression> expression_up;
and then adjusts the codebase throughout to stop using cleanups to
manage lifetime of expression pointers.
Whenever I found a structure owning an expression pointer, I made it
store a unique_ptr instead of a raw pointer, which then requires using
new/delete of the holding structure, instead of XNEW/xfree.
[1] - I'd like to set the rule that types named with an "_up" suffix
are unique_ptr typedefs.
Note I used gdb::unique_xmalloc_ptr instead of gdb::unique_ptr, simply
because we still use xmalloc instead of new to allocate expression
objects. Once that's changed, all we need to do is change the
expression_up typedef and the smart pointer will then call delete
instead of xfree.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_read_renaming_var_value): Use expression_up.
(struct ada_catchpoint_location) <excep_cond_expr>: Now an
expression_up.
(ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
using xfree.
(create_excep_cond_exprs): Use expression_up and gdb::move.
(allocate_location_exception): Use new instead of XNEW.
(should_stop_exception): Likewise. Adjust to use expression_up.
(create_ada_exception_catchpoint): Use new instead of XNEW.
* ax-gdb.c (agent_eval_command_one): Use expression_up instead of
cleanups.
(maint_agent_printf_command): Use expression_up.
* break-catch-sig.c (create_signal_catchpoint): Use new instead of
XNEW.
* break-catch-syscall.c (create_syscall_event_catchpoint):
Likewise.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
of XCNEW. Use gdb::unique_ptr instead of cleanups.
* breakpoint.c (set_breakpoint_condition, update_watchpoint)
(parse_cmd_to_aexpr, watchpoint_check)
(bpstat_check_breakpoint_conditions, watchpoint_locations_match):
Adjust to use expression_up.
(init_bp_location): Adjust.
(free_bp_location): Use delete instead of xfree.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(add_solib_catchpoint, create_fork_vfork_event_catchpoint)
(new_single_step_breakpoint, create_breakpoint_sal): Use new
instead of XNEW.
(find_condition_and_thread): Adjust to use expression_up.
(create_breakpoint): Use new instead of XNEW.
(dtor_watchpoint): Don't xfree expression pointers, they're
unique_ptr's now.
(insert_watchpoint, remove_watchpoint): Adjust.
(watch_command_1): Use expression_up. Use new instead of XCNEW.
(catch_exec_command_1): Use new instead of XNEW.
(bp_location_dtor): Don't xfree expression pointers, they're
unique_ptr's now.
(base_breakpoint_allocate_location)
(strace_marker_create_breakpoints_sal): Use new instead of XNEW.
(delete_breakpoint): Use delete instead of xfree.
* breakpoint.h (struct bp_location) <cond>: Now an
unique_ptr<expression> instead of a raw pointer.
(struct watchpoint) <exp, cond_exp>: Likewise.
* cli/cli-script.c (execute_control_command): Use expression_up
instead of cleanups.
* dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
* eval.c (parse_and_eval_address, parse_and_eval_long)
(parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
Use expression_up instead of cleanups.
* expression.h (expression_up): New typedef.
(parse_expression, parse_expression_with_language, parse_exp_1):
Change return type to expression_up.
* mi/mi-main.c (mi_cmd_data_evaluate_expression)
(print_variable_or_computed): Use expression_up.
* objc-lang.c (print_object_command): Use expression_up instead of
cleanups.
* parse.c (parse_exp_1, parse_exp_in_context)
(parse_exp_in_context_1, parse_expression)
(parse_expression_with_language): Return an expression_up instead
of a raw pointer.
(parse_expression_for_completion): Use expression_up.
* printcmd.c (struct display) <exp>: Now an expression_up instead
of a raw pointer.
(print_command_1, output_command_const, set_command, x_command):
Use expression_up instead of cleanups.
(display_command): Likewise. Use new instead of XNEW.
(free_display): Use delete instead of xfree.
(do_one_display): Adjust to use expression_up.
* remote.c (remote_download_tracepoint): Likewise.
* stack.c (return_command): Likewise.
* tracepoint.c (validate_actionline, encode_actions_1): Use
expression_up instead of cleanups.
* typeprint.c (whatis_exp, maintenance_print_type): Likewise.
* value.c (init_if_undefined_command): Likewise.
* varobj.c (struct varobj_root) <exp>: Now an expression_up
instead of a raw pointer.
(varobj_create): Adjust.
(varobj_set_value): Use an expression_up instead of cleanups.
(new_root_variable): Use new instead of XNEW.
(free_variable): Use delete instead of xfree.
(value_of_root_1): Use std::swap.
This is constification needed for next patch. Adjust
commands_command_1 to use std::string too because the "arg" parameter
is currently overwritten and then passed to make_cleanup. The
constification alone would trigger a compile error in the make_cleanup
call otherwise (passing const char * to void * parameter). Using
std::string gets rid of the cleanup in the first place, resulting in
simpler code.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* breakpoint.c (struct commands_info) <arg>: Constify.
(commands_command_1): Constify 'arg' parameter. Use std::string
and string_printf.
(commands_from_control_command): Constify 'arg' parameter.
(map_breakpoint_numbers): Constify 'args' parameter.
* breakpoint.h (commands_from_control_command): Constify 'arg'
parameter.