This patch moves the gdb/gnulib subdirectory to the top level.
It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this. However, gdbserver still builds its own
copy of gnulib, just from the new source location.
A small hack was needed to ensure that gnulib is only built when gdb
is enabled. The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.
Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.
Tested by the buildbot.
ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add gnulib.
* gnulib: New directory, move from gdb/gnulib.
* configure.ac (host_libs): Add gnulib.
* configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* gnulib: Move directory to top-level.
* configure.ac: Don't configure gnulib.
* configure: Rebuild.
* common/common-defs.h: Use new path to gnulib.
* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
(GNULIB_H): Remove.
(INCGNU): Look in new gnulib location.
(HFILES_NO_SRCDIR): Remove gnulib files.
(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
(generated_files): Remove GNULIB_H.
($(LIBGNU), all-lib): Remove targets.
(distclean): Don't mention GNULIB_BUILDDIR.
($(GNULIB_BUILDDIR)/Makefile): Remove target.
gdb/gdbserver/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* configure.ac: Use new path to gnulib.
* configure: Rebuild.
* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
to gnulib.
gnulib/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* update-gnulib.sh: Adjust paths.
* Makefile.in: Adjust paths.
* configure.ac: Adjust paths. Use ACX_LARGEFILE.
* configure: Rebuild.
When "common" becomes a library, linking will cause a symbol clash,
because "xmalloc" and some related symbols are defined in that
library, libiberty, and readline.
To work around this problem, this patch moves the clashing symbols to
a new file, which is then compiled separately for both gdb and
gdbserver.
gdb/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* common/common-utils.c (xmalloc, xrealloc, xcalloc)
(xmalloc_failed): Move to alloc.c.
* alloc.c: New file.
* Makefile.in (COMMON_SFILES): Add alloc.c.
gdb/gdbserver/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* Makefile.in (SFILES): Add alloc.c.
(OBS): Add alloc.o.
(IPA_OBJS): Add alloc-ipa.o.
(alloc-ipa.o): New target.
(%.o: ../%.c): New pattern rule.
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
This adds a no-op deleter, which is used in subsequent patches.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* common/gdb_unique_ptr.h (struct noop_deleter): New.
I noticed that scoped_mmap.h included config.h, and that scoped_mmap.c
included defs.h. This patch fixes both of these problems.
Tested by the buildbot.
gdb/ChangeLog
2019-05-06 Tom Tromey <tom@tromey.com>
* common/scoped_mmap.c: Include common-defs.h.
* common/scoped_mmap.h: Don't include config.h.
This changeset defines _WIN32_WINNT to at least 0x0501, the level
of Windows XP, unless defined to a higher level, in a single
place. It then removes all the overrides of _WIN32_WINNT in
individual files as no longer needed. Doing this also solves
compilation of windows-nat.c with mingw.org's MinGW, as that
file uses CONSOLE_FONT_INFO which needs the XP level to become
exposed in the Windows headers, while mingw.org defaults to
Windows 9X.
gdb/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* common/common-defs.h [__MINGW32__ || __CYGWIN__]: Define
_WIN32_WINNT to the XP level, unless already defined to a higher
level.
* unittests/parse-connection-spec-selftests.c:
* ser-tcp.c:
* common/netstuff.c [USE_WIN32API]: Remove the _WIN32_WINNT
override.
gdb/gdbserver/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* remote-utils.c:
* gdbreplay.c [USE_WIN32API]: Remove the _WIN32_WINNT override.
This makes exception handling more efficient in a few spots, through
the use of const- and rvalue-references.
I wrote this patch by commenting out the gdb_exception copy
constructor and then examining the resulting error messages one by
one, introducing the use of std::move where appropriate.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (struct gdb_xml_parser) <set_error>: Take an
rvalue reference.
(gdb_xml_start_element_wrapper, gdb_xml_end_element_wrapper)
(gdb_xml_parser::parse): Use std::move.
* python/python-internal.h (gdbpy_convert_exception): Take a const
reference.
* python/py-value.c (valpy_getitem, valpy_nonzero): Use
std::move.
* python/py-utils.c (gdbpy_convert_exception): Take a const
reference.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Use std::move.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Use std::move.
* mi/mi-main.c (mi_print_exception): Take a const reference.
* main.c (handle_command_errors): Take a const reference.
* linespec.c (parse_linespec): Use std::move.
* infcall.c (run_inferior_call): Use std::move.
(call_function_by_hand_dummy): Use std::move.
* exec.c (try_open_exec_file): Use std::move.
* exceptions.h (exception_print, exception_fprintf)
(exception_print_same): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Change parameters to
const reference.
* event-top.c (gdb_rl_callback_read_char_wrapper): Update.
* common/new-op.c: Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
constructor.
(struct gdb_exception_error, struct gdb_exception_quit, struct
gdb_quit_bad_alloc): Change constructor to move constructor.
(throw_exception): Change parameter to rvalue reference.
* common/common-exceptions.c (throw_exception): Take rvalue
reference.
* cli/cli-interp.c (safe_execute_command): Use std::move.
* breakpoint.c (insert_bp_location, location_to_sals): Use
std::move.
This changes the SJLJ exception handling code to be a bit more
efficient, by using rvalue references and move assignment when
possible.
Tested by the buildbot.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept)
(gdb_rl_callback_handler): Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
assignment operator.
(throw_exception_sjlj): Change "exception" to const reference.
* common/common-exceptions.c (exceptions_state_mc_catch): Update.
(throw_exception_sjlj): Change "exception" to const reference.
- Explicitly include <string> for std::string.
- Use std::make_shared to construct gdb_exception::message instead of
operator new, avoiding one heap allocation (2 instead of 3). Add
'const char *fmt, va_list ap' parameters to
gdb_exception{,error,quit}'s ctors, and do the std::make_shared in
the gdb_exception ctor.
- gdb_exception_error's constructor does not need to have an 'enum
return_reason' parameter, since it is always RETURN_ERROR, by
definition.
- Similarly, gdb_exception_quit's contructor does not need to have
'enum return_reason'/'enum errors' parameters.
- In the gdb_exception_{quit,_error} ctors that take a gdb_exception
as argument, assert that they're being passed a gdb_exception object
of the right 'reason'.
gdb/ChangeLog:
2019-04-08 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (throw_exception): Don't create
named object to throw; throw directly.
(throw_it): Likewise. Don't initialize gdb_exception::message
here, with new; pass FMT and AP to the ctor instead.
* common/common-exceptions.h: Include <string>.
(gdb_exception::gdb_exception(enum return_reason, enum errors,
const char *, va_list)): New ctor. Use std::make_shared.
(gdb_exception_error::gdb_exception_error(enum return_reason, enum
errors)): Delete.
(gdb_exception_error::gdb_exception_error(enum errors, const char
*, va_list)): New.
(gdb_exception_error::gdb_exception_error(const gdb_exception &)):
Add assertion.
(gdb_exception_quit::gdb_exception_quit(enum return_reason, enum
errors)): Delete.
(gdb_exception_quit::gdb_exception_quit(const char *, va_list)): New.
(gdb_exception_quit::gdb_exception_quit(const gdb_exception &)):
Add assertion.
This makes exception throwing a bit more efficient, by removing some
copies.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.c (throw_exception): Rename from
throw_exception_cxx. Remove old copy. Make argument const.
(throw_it): Create and throw exception objects directly.
* common/common-exceptions.h (throw_exception): Make argument
const.
(struct gdb_exception_error): Add constructor.
(struct gdb_exception_quit): Add constructor.
After the rewriting to use try/catch, some of the exception code is
now unused. This patch removes that code.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (exception_rethrow): Don't declare.
(TRY_SJLJ): Update comment.
(TRY, CATCH, END_CATCH): Remove.
* common/common-exceptions.c (exception_rethrow): Remove.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
Now that cleanups have been removed, TRY/CATCH can't be SJLJ-based any
more. This patch simplifies the exception handling code, by removing
the non-working variants.
Note that the "pure" C++ exception handling code is removed as well; I
think the route forward must be to change exceptions to be
self-destructing, so that try_scope_depth can simply be removed.
Some longjmp-based code remains, as it is needed to throw an exception
through readline.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (GDB_XCPT_SJMP, GDB_XCPT_TRY)
(GDB_XCPT_RAW_TRY, GDB_XCPT): Remove.
(TRY, CATCH, END_CATCH): Remove some definitions.
* common/common-exceptions.c: Don't use GDB_XCPT.
(catcher_list_size): Remove.
(throw_exception, throw_it): Simplify.
This makes null_ptid and minus_one_ptid "const". I think this is an
improvement because it means they can't be accidentally modified.
2019-03-12 Tom Tromey <tromey@adacore.com>
* common/ptid.c (null_ptid, minus_one_ptid): Now const.
* common/ptid.h (null_ptid, minus_one_ptid): Now const.
This removes the last cleanup from linux-namespaces.c, replacing it
with a use of SCOPE_EXIT.
2019-03-06 Tom Tromey <tom@tromey.com>
* nat/linux-namespaces.c (linux_mntns_access_fs): Use SCOPE_EXIT.
* common/filestuff.h (make_cleanup_close): Don't declare.
* common/filestuff.c (do_close_cleanup, make_cleanup_close):
Remove.
This applies ATTRIBUTE_UNUSED_RESULT to ref_ptr::release and updates a
few spots to comply. I believe one use in install_default_visualizer
was in error, fixed by this patch.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* varobj.c (update_dynamic_varobj_children): Update.
(install_default_visualizer): Use reset, not release.
* value.c (set_internalvar): Update.
* dwarf2loc.c (value_of_dwarf_reg_entry): Update.
* common/gdb_ref_ptr.h (class ref_ptr) <release>: Add
ATTRIBUTE_UNUSED_RESULT.
This applies ATTRIBUTE_UNUSED_RESULT to scoped_mmap::release and fixes
a couple of spots to comply.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* nat/linux-btrace.c (linux_enable_bts, linux_enable_pt): Update.
* common/scoped_mmap.h (class scoped_mmap) <release>: Add
ATTRIBUTE_UNUSED_RESULT.
This introduces the new ATTRIBUTE_UNUSED_RESULT define, and applies it
to gdb_argv::release.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* utils.h (class gdb_argv) <release>: Add
ATTRIBUTE_UNUSED_RESULT.
* common/common-defs.h (ATTRIBUTE_UNUSED_RESULT): Define.
gdb/ChangeLog:
2019-03-02 Eli Zaretskii <eliz@gnu.org>
PR gdb/24292
* common/netstuff.c:
* gdbserver/gdbreplay.c
* gdbserver/remote-utils.c:
* ser-tcp.c:
* unittests/parse-connection-spec-selftests.c [USE_WIN32API]:
Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine
_WIN32_WINNT to 0x0501 if defined to a smaller value, as
'getaddrinfo' and 'freeaddrinfo' were not available before
Windows XP, and mingw.org's MinGW headers by default define
_WIN32_WINNT to 0x500.
child_path returns a pointer to the first component in a child path
that comes after a parent path. This does not depend on trying to
stat() the paths since they may describe remote paths but instead
relies on filename parsing. The function requires that the child path
describe a filename that contains at least one component below the
parent path and returns a pointer to the first component.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/child-path-selftests.c.
* common/pathstuff.c (child_path): New function.
* common/pathstuff.h (child_path): New prototype.
* unittests/child-path-selftests.c: New file.
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
This changes create-version.sh to have the generated file use
common/version.h as the file name.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* common/create-version.sh: Use common/version.h.
This fixes the following build error with clang/libc++, reported at
<https://sourceware.org/ml/gdb-patches/2019-01/msg00537.html>:
(...)
In file included from breakpoint.c:34:
In file included from ./inferior.h:54:
./common/forward-scope-exit.h:98:7: error: no matching constructor for
initialization of 'decltype(std::bind(&delete_longjmp_breakpoint,
std::declval<int>()))' (aka '__bind<void (*)(int), int>')
: m_bind_function (std::bind (function, args...))
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./common/gdb_optional.h:155:19: note: in instantiation of member
function 'detail::forward_scope_exit<void (int),
&delete_longjmp_breakpoint, void (int)>::forward_scope_exit' requested
here
new (&m_item) T (std::forward<Args>(args)...);
^
breakpoint.c:11127:18: note: in instantiation of function template
specialization 'gdb::optional<detail::forward_scope_exit<void (int),
&delete_longjmp_breakpoint, void (int)> >::emplace<int &>' requested
here
lj_deleter.emplace (thread);
^
/Applications/Xcode-10.1.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1/functional:2220:7:
note: candidate constructor (the implicit copy constructor) not
viable: no known conversion from '__bind<[...], int &>' to 'const
__bind<[...], int>' for 1st argument
class __bind
^
(...)
I don't really know why I ended up with a copy here. We can just pass
the arguments directly to the being-constructed bind.
gdb/ChangeLog:
2019-01-24 Pedro Alves <palves@redhat.com>
* common/forward-scope-exit.h
(forward_scope_exit::forward_scope_exit): Pass arguments to
m_bind_function directly, instead of creating a std::bind and
copying that.
This adds a template that can be used to automatically instantiate
scope_exit-like types that wrap some cleanup function. The
instantiated type has a ctor that has the same interface as the
wrapped function. While the "magic" is just straight C++11, the
intended use is via the FORWARD_SCOPE_EXIT macro, which is a minimal
macro that avoids spelling out the wrapped function name more than
once:
void some_function (int foo, object *bar);
using some_function_fce = FORWARD_SCOPE_EXIT (some_function);
some_function_fce cleanup (some_int, some_obj_ptr);
The above runs:
some_function (some_int, some_obj_ptr);
at scope exit.
This is mainly useful as opposed to a simpler SCOPE_EXIT when you need
to:
- cancel the scope_exit, in which case you need the object's name
- wrap the scope_exit in a gdb::optional, in which case you need the
scope_exit's type in advance.
More details in the code comments.
gdb/ChangeLog:
2019-01-23 Pedro Alves <palves@redhat.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* common/forward-scope-exit.h: New file.
This add a new template class scope_exit. scope_exit is a
general-purpose scope guard that calls its exit function at the end of
the current scope. A scope_exit may be canceled by calling the
"release" method. The API is modeled on P0052R5 - Generic Scope Guard
and RAII Wrapper for the Standard Library, which is itself based on
Andrej Alexandrescu's ScopeGuard/SCOPE_EXIT.
The main advantage of scope_exit is avoiding writing single-use RAII
classes and its boilerplate. Following patches will remove a few of
such classes.
There are two forms available:
- The "make_scope_exit" form allows canceling the scope guard. Use
it like this:
auto cleanup = make_scope_exit ( <function, function object, lambda> );
...
cleanup.release (); // cancel
- If you don't need to cancel the guard, you can use the SCOPE_EXIT
macro, like this:
SCOPE_EXIT { /* any code you like here. */ }
Note: scope_exit instances do not allocate anything on the heap.
gdb/ChangeLog:
2019-01-23 Pedro Alves <palves@redhat.com>
Andrew Burgess <andrew.burgess@embecosm.com>
Tom Tromey <tom@tromey.com>
* common/scope-exit.h: New file.
A following patch will include common/preprocessor.h in some .c file
that also includes readline.h, and that revealed a conflict -- ESC is
defined by readline.h as well (actually readline's chardefs.h) with a
completely unrelated meaning:
#define ESC CTRL('[')
Rename our version to avoid the conflict.
gdb/ChangeLog:
2019-01-23 Pedro Alves <palves@redhat.com>
* common/preprocessor.h (ESC): Rename to ...
(ESC_PARENS): ... this.
* common/valid-expr.h (CHECK_VALID_EXPR_1, CHECK_VALID_EXPR_2)
(CHECK_VALID_EXPR_3, CHECK_VALID_EXPR_4): Adjust.
This introduces an iterable object which can be used to iterate over
objfiles. It also introduces a generic "next_iterator", which can be
used to iterate over types that have a "next" field.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* common/next-iterator.h: New file.
* objfiles.h (class all_objfiles): New.
(struct objfile_iterator): New.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
kinfo_getfile() requires a couple of system calls to fetch the list of
open file descriptors. This can be much cheaper than invoking fstat
on all of the values from 0 to the open file resource limit maximum.
gdb/ChangeLog:
* common/filestuff.c [HAVE_KINFO_GETFILE]: Include headers.
(fdwalk) [HAVE_KINFO_GETFILE]: Use kinfo_getfile.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
This replaces more pointer+length with gdb::array_view. This time,
around invoke_xmethod, and then propagating the fallout around, which
inevitably leaks to the overload resolution code.
There are several places in the code that want to grab a slice of an
array, by advancing the array pointer, and decreasing the length
pointer. This patch introduces a pair of new
gdb::array_view::slice(...) methods to make that convenient and clear.
Unit test included.
gdb/ChangeLog:
2018-11-21 Pedro Alves <palves@redhat.com>
* common/array-view.h (array_view::splice(size_type, size_t)): New.
(array_view::splice(size_type)): New.
* eval.c (eval_call, evaluate_funcall): Adjust to use array_view.
* extension.c (xmethod_worker::get_arg_types): Adjust to return an
std::vector.
(xmethod_worker::get_result_type): Adjust to use gdb::array_view.
* extension.h: Include "common/array-view.h".
(xmethod_worker::invoke): Adjust to use gdb::array_view.
(xmethod_worker::get_arg_types): Adjust to return an std::vector.
(xmethod_worker::get_result_type): Adjust to use gdb::array_view.
(xmethod_worker::do_get_arg_types): Adjust to use std::vector.
(xmethod_worker::do_get_result_type): Adjust to use
gdb::array_view.
* gdbtypes.c (rank_function): Adjust to use gdb::array_view.
* gdbtypes.h: Include "common/array-view.h".
(rank_function): Adjust to use gdb::array_view.
* python/py-xmethods.c (python_xmethod_worker::invoke)
(python_xmethod_worker::do_get_arg_types)
(python_xmethod_worker::do_get_result_type)
(python_xmethod_worker::invoke): Adjust to new interfaces.
* valarith.c (value_user_defined_cpp_op, value_user_defined_op)
(value_x_binop, value_x_unop): Adjust to use gdb::array_view.
* valops.c (find_overload_match, find_oload_champ_namespace)
(find_oload_champ_namespace_loop, find_oload_champ): Adjust to use
gdb:array_view and the new xmethod_worker interfaces.
* value.c (result_type_of_xmethod, call_xmethod): Adjust to use
gdb::array_view.
* value.h (find_overload_match, result_type_of_xmethod)
(call_xmethod): Adjust to use gdb::array_view.
* unittests/array-view-selftests.c: Add slicing tests.
This replaces a few uses of pointer+length with gdb::array_view, in
call_function_by_hand and related code.
Unfortunately, due to -Wnarrowing, there are places where we can't
brace-initialize an gdb::array_view without an ugly-ish cast. To
avoid the cast, this patch introduces a gdb::make_array_view function.
Unit tests included.
This patch in isolation may not look so interesting, due to
gdb::make_array_view uses, but I think it's still worth it. Some of
the gdb::make_array_view calls disappear down the series, and others
could be eliminated with more (non-trivial) gdb::array_view
detangling/conversion (e.g. code around eval_call). See this as a "we
have to start somewhere" patch.
gdb/ChangeLog:
2018-11-21 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_evaluate_subexp): Adjust to pass an array_view.
* common/array-view.h (make_array_view): New.
* compile/compile-object-run.c (compile_object_run): Adjust to
pass an array_view.
* elfread.c (elf_gnu_ifunc_resolve_addr): Adjust.
* eval.c (eval_call): Adjust to pass an array_view.
(evaluate_subexp_standard): Adjust to pass an array_view.
* gcore.c (call_target_sbrk): Adjust to pass an array_view.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* infcall.c (push_dummy_code): Replace pointer + size parameters
with an array_view parameter.
(call_function_by_hand, call_function_by_hand_dummy): Likewise and
adjust.
* infcall.h: Include "common/array-view.h".
(call_function_by_hand, call_function_by_hand_dummy): Replace
pointer + size parameters with an array_view parameter.
* linux-fork.c (inferior_call_waitpid): Adjust to use array_view.
* linux-tdep.c (linux_infcall_mmap): Likewise.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring, print_object_command): Likewise.
* python/py-value.c (valpy_call): Likewise.
* rust-lang.c (rust_evaluate_funcall): Likewise.
* spu-tdep.c (flush_ea_cache): Likewise.
* valarith.c (value_x_binop, value_x_unop): Likewise.
* valops.c (value_allocate_space_in_inferior): Likewise.
* unittests/array-view-selftests.c (run_tests): Add
gdb::make_array_view test.
This warning was displayed by OutputDebugString on MinGW when
GDB was being debugged natively.
gdb/ChangeLog:
* common/filestuff.c (gdb_fopen_cloexec): Disable use of "e" mode
with 'fopen' also if O_CLOEXEC is equal to O_NOINHERIT, to cater
to MinGW fixed by Gnulib.
Building with mingw currently fails:
CXX unittests/mkdir-recursive-selftests.o
/home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c: In function ‘void selftests::mkdir_recursive::test()’:
/home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c:49:20: error: ‘mkdtemp’ was not declared in this scope
if (mkdtemp (base) == NULL)
^
Commit
e418a61a67 ("Move mkdir_recursive to common/filestuff.c")
moved this code, but also removed the HAVE_MKDTEMP guard which prevented
the mkdtemp call to be compiled on mingw.
We can either put back the HAVE_MKDTEMP ifdef, or import the gnulib
mkdtemp module, which provides the function for mingw. Since the
mkdir_recursive is susceptible to be used on mingw at some point, I
think it would be nice to have it tested on mingw, so I did the latter.
Once built, I tested it on Windows (copied the resulting gdb.exe on a
Windows machine, ran it, and ran "maint selftest mkdir_recursive"). It
failed, because the temporary directory is hardcoded to "/tmp/...". I
therefore added and used a new get_standard_temp_dir function, which
returns an appropriate temporary directory for the host platform.
gdb/ChangeLog:
* common/pathstuff.c (get_standard_temp_dir): New.
* common/pathstuff.h (get_standard_temp_dir): New.
* config.in: Re-generate.
* configure: Re-generate.
* configure.ac: Don't check for mkdtemp.
* gnulib/aclocal-m4-deps.mk: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.am: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
* gnulib/import/m4/gnulib-cache.m4: Re-generate.
* gnulib/import/m4/gnulib-comp.m4: Re-generate.
* gnulib/import/m4/mkdtemp.m4: New file.
* gnulib/import/mkdtemp.c: New file.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES):
Add mkdtemp module.
* unittests/mkdir-recursive-selftests.c (test): Use
get_standard_temp_dir.
(_initialize_mkdir_recursive_selftests): Remove HAVE_MKDTEMP
ifdef.
* compile/compile.c (get_compile_file_tempdir): Likewise.
Gentoo has a local GCC patch which always defines _FORTIFY_SOURCE=2.
This causes a build problem when building GDB there, because
"common/common-defs.h" also defines _FORTIFY_SOURCE=2:
CXX gdb.o
In file included from ../../gdb/defs.h:28:0,
from ../../gdb/gdb.c:19:
../../gdb/common/common-defs.h:71:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
#define _FORTIFY_SOURCE 2
<built-in>: note: this is the location of the previous definition
cc1plus: all warnings being treated as errors
make[2]: *** [Makefile:1619: gdb.o] Error 1
Even though it is questionable whether Gentoo's approach is the
correct one:
https://jira.mongodb.org/browse/SERVER-29982https://bugs.gentoo.org/621036
it is still possible for GDB to be a bit more robust here and make
sure it just defines _FORTIFY_SOURCE if it hasn't been defined
already. This patch does that.
Tested by rebuilding and making sure the macro was defined.
gdb/ChangeLog:
2018-10-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/23835
* common/common-defs.h: Don't redefine _FORTIFY_SOURCE if it's
already defined.
This patch is a follow-up of:
https://sourceware.org/ml/gdb-patches/2018-10/msg00601.html
It removes the declaration of the relational operators for
common/offset-type.h. As it turns out, these overloads are not being
used when a new offset type is declared, because, according to Pedro
Alves:
I think the functions aren't called because they are templates, and
thus the built-in (non-template) versions take precedence. If you
make them non-templates, then they should be called. But, the
built-ins are fine, so yeah, we can just remove the custom
definitions.
The patch also adjusts the comments on the code.
No regressions introduced.
gdb/ChangeLog:
2018-10-29 Sergio Durigan Junior <sergiodj@redhat.com>
* common/offset-type.h (DEFINE_OFFSET_REL_OP): Delete.
Adjust comments.
Commit f19c7ff839 added a new member to the
prefixes array which included a use of the symbol AF_LOCAL. Unfortunately,
not all systems declare this symbol. This change only compiles the "unix:"
member if the system knows about AF_LOCAL.
gdb/ChangeLog:
* configure.ac: New test HAVE_AF_LOCAL
* common/netstuff.c (parse_connection_spec) [prefixes]: Only compile "unix:"
if HAVE_AF_LOCAL is true.
* configure: regenerate.
* config.in: regenerate.
Tom Tromey
Pedro Alves
Alan Hayward
Eli Zaretskii
Tom Tromey
John Baldwin
Joel Brobecker
Simon Marchi
Sergio Durigan Junior
John Darrington