One of the last checks update_breakpoints_after_exec does while looping
over the list of breakpoints is check that the breakpoint has a valid
location spec. It uses event_location_empty_p to check if the location spec
is "empty", and if it is, the breakpoint is deleted.
momentary_breakpoint types rely on setting the breakpoint structure's
location spec to NULL, thereby causing an update to delete the breakpoint.
However, event_location_empty_p assumed that locations were never NULL.
As a result, GDB would crash dereferencing a NULL pointer whenever
update_breakpoints_after_exec would encounter a momentary_breakpoint.
This patch creates a new wrapper/helper function which tests that the given
breakpoint's location spec is non-NULL and if it is not "empty"
or "unspecified."
gdb/ChangeLog
PR breakpoints/19546
* breakpoint.c (breakpoint_event_location_empty_p): New function.
(update_breakpoints_after_exec, bkpt_re_set): Use this new function
instead of event_location_empty_p.
gdb/testsuite/ChangeLog
PR breakpoints/19546
* gdb.base/infcall-exec.c: New file.
* gdb.base/infcall-exec2.c: New file.
* gdb.base/infcall-exec.exp: New file.
PR19548 shows that we still have problems related to 13fd3ff34329:
[PR17431: following execs with "breakpoint always-inserted on"]
https://sourceware.org/ml/gdb-patches/2014-09/msg00733.html
The problem this time is that we currently update the global location
list and try to insert breakpoint locations after re-setting _each_
breakpoint in turn.
Say:
- We have _more_ than one breakpoint set. Let's assume 2.
- There's a breakpoint with a pre-exec address that ends up being an
unmapped address after the exec.
- That breakpoint is NOT the first in the breakpoint list.
Then when handling an exec, and we re-set the first breakpoint in the
breakpoint list, we mistakently try to install the old pre-exec /
un-re-set locations of the other breakpoint, which fails:
(gdb) continue
Continuing.
process 28295 is executing new program: (...)/execl-update-breakpoints2
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 2.
Cannot access memory at address 0x1000764
Breakpoint 1, main (argc=1, argv=0x7fffffffd368) at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/execl-update-breakpoints.c:34
34 len = strlen (argv[0]);
(gdb)
Fix this by deferring the global location list update till after all
breakpoints are re-set.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-09 Pedro Alves <palves@redhat.com>
PR breakpoints/19548
* breakpoint.c (create_overlay_event_breakpoint): Don't update
global location list here.
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, create_jit_event_breakpoint)
(update_breakpoint_locations):
(breakpoint_re_set): Update global location list after all
breakpoints are re-set.
gdb/testsuite/ChangeLog:
2016-02-09 Pedro Alves <palves@redhat.com>
PR breakpoints/19548
* gdb.base/execl-update-breakpoints.c (some_function): New
function.
(main): Call it.
* gdb.base/execl-update-breakpoints.exp: Add a second breakpoint.
Tighten expected GDB output.
When running tests in parallel, each test puts its generated files in a
different directory, under "outputs". I think it would be nice if it
was always the case, as it would isolate the test cases a bit more. An
artifact created by a test wouldn't get overwritten by another test.
Also, it makes it easier to clean up. A lot of executables are left all
over the place because their names do not appear in gdb.*/Makefile. If
everything is in "outputs", then we just have to delete that directory
(which we already do).
At the same time it makes the gdb.foo directories and their Makefiles
useless in the build directory, since they are pretty much only used for
cleaning.
What do you think?
gdb/testsuite/ChangeLog:
* Makefile.in (ALL_SUBDIRS): Remove.
(clean mostlyclean): Do not recurse in ALL_SUBDIRS.
(distclean maintainer-clean realclean): Likewise.
* configure.ac (AC_OUTPUT): Remove gdb.*/Makefile.
* configure: Regenerate.
* gdb.ada/Makefile.in: Delete.
* gdb.arch/Makefile.in: Likewise.
* gdb.asm/Makefile.in: Likewise.
* gdb.base/Makefile.in: Likewise.
* gdb.btrace/Makefile.in: Likewise.
* gdb.cell/Makefile.in: Likewise.
* gdb.compile/Makefile.in: Likewise.
* gdb.cp/Makefile.in: Likewise.
* gdb.disasm/Makefile.in: Likewise.
* gdb.dlang/Makefile.in: Likewise.
* gdb.dwarf2/Makefile.in: Likewise.
* gdb.fortran/Makefile.in: Likewise.
* gdb.gdb/Makefile.in: Likewise.
* gdb.go/Makefile.in: Likewise.
* gdb.guile/Makefile.in: Likewise.
* gdb.java/Makefile.in: Likewise.
* gdb.linespec/Makefile.in: Likewise.
* gdb.mi/Makefile.in: Likewise.
* gdb.modula2/Makefile.in: Likewise.
* gdb.multi/Makefile.in: Likewise.
* gdb.objc/Makefile.in: Likewise.
* gdb.opencl/Makefile.in: Likewise.
* gdb.opt/Makefile.in: Likewise.
* gdb.pascal/Makefile.in: Likewise.
* gdb.perf/Makefile.in: Likewise.
* gdb.python/Makefile.in: Likewise.
* gdb.reverse/Makefile.in: Likewise.
* gdb.server/Makefile.in: Likewise.
* gdb.stabs/Makefile.in: Likewise.
* gdb.threads/Makefile.in: Likewise.
* gdb.trace/Makefile.in: Likewise.
* gdb.xml/Makefile.in: Likewise.
* lib/gdb.exp (make_gdb_parallel_path): Add check for
GDB_PARALLEL.
(standard_output_file): Remove check for GDB_PARALLEL, always
return path in outputs/$subdir/$testname.
BASEDIR was added by https://sourceware.org/ml/gdb-patches/2013-10/msg00587.html
in order to handle the different directory layout in serial testing
and parallel testing. BASEDIR is "gdb.base" in serial testing and is
"outputs/gdb.base/TESTNAME" in parallel testing. However, it doesn't
work if the GDBserver is in remote target, like this,
$ make check RUNTESTFLAGS='--target_board=remote-gdbserver-on-localhost foll-vfork.exp foll-exec.exp'
FAIL: gdb.base/foll-exec.exp: continue to first exec catchpoint (the program exited)
FAIL: gdb.base/foll-vfork.exp: exec: vfork and exec child follow, to main bp: continue to bp (the program exited)
FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: finish (the program exited)
FAIL: gdb.base/foll-vfork.exp: exec: vfork relations in info inferiors: continue to bp (the program exited)
these tests fail because the executable can't be found. With target
board native-gdbserver, the program is spawned this way,
spawn ../gdbserver/gdbserver --once :2347 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.base/foll-vfork
so BASEDIR is correct. However, with target board
remote-gdbserver-on-localhost, the program is spawned
spawn /usr/bin/ssh -l yao localhost /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../gdbserver/gdbserver --once :2346 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.base/foll-vfork
so BASEDIR (either "gdb.base" or "outputs/gdb.base/TESTNAME") makes no
sense.
I had a fix that pass absolute directory to BASEDIR, but it assumes
that directory structure is the same on build and target, and it
doesn't work in remote host case. The current fix in this patch is
to get the directory from argv[0]. In any case, the program to be
exec'ed is at the same directory with the main program.
Note that these tests do "next N" to let program stop at the desired
line, but it is fragile, because GDB for different targets may skip
function prologue slightly differently, so I replace some of them by
"tbreak on LINE NUMBER and continue".
gdb/testsuite:
2016-02-04 Yao Qi <yao.qi@linaro.org>
* gdb.base/foll-exec-mode.c: Include limits.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.base/foll-exec-mode.exp: Don't pass -DBASEDIR in
compilation.
* gdb.base/foll-exec.c: Include limits.h.
(main): Add parameters argc and argv.
Get directory from argv[0].
* gdb.base/foll-exec.exp: Don't pass -DBASEDIR in compilation.
Adjust tests on the number of lines as source code changed.
* gdb.base/foll-vfork-exit.c: Include limits.h.
(main): Add one line of statement before vfork.
* gdb.base/foll-vfork.c: Include limits.h and string.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.base/foll-vfork.exp: Don't pass -DBASEDIR in compilation.
(setup_gdb): Set tbreak to skip some source lines.
* gdb.multi/bkpt-multi-exec.c: Include limits.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.multi/bkpt-multi-exec.exp: Don't pass -DBASEDIR in
compilation.
* gdb.multi/multi-arch-exec.c: Include limits.h and string.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.multi/multi-arch-exec.exp: Don't pass -DBASEDIR in
compilation.
For languages with dynamic types, an incorrect program, or uninitialised
variables within a program, could result in an incorrect, overly large
type being associated with a value. Currently, attempting to print such
a variable will result in gdb trying to allocate an overly large buffer.
If this large memory allocation fails then the result can be gdb either
terminating, or (due to memory contention) becoming unresponsive for the
user.
A new user visible variable in gdb helps guard against such problems,
two new commands are available:
set max-value-size
show max-value-size
The 'max-value-size' is the maximum size of memory in bytes that gdb
will allocate for the contents of a value. Any attempt to allocate a
value with a size greater than this will result in an error. The
initial default for this limit is set at 64k, this is based on a similar
limit that exists within the ada specific code.
It is possible for the user to set max-value-size to unlimited, in which
case the old behaviour is restored.
gdb/ChangeLog:
* value.c (max_value_size): New variable.
(MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
(show_max_value_size): New function.
(check_type_length_before_alloc): New function.
(allocate_value_contents): Call check_type_length_before_alloc.
(set_value_enclosing_type): Likewise.
(_initialize_values): Add set/show handler for max-value-size.
* NEWS: Mention new set/show command.
gdb/doc/ChangeLog:
* gdb.texinfo (Value Sizes): New section.
(Data): Add the 'Value Sizes' node to the menu.
gdb/testsuite/ChangeLog:
* gdb.base/max-value-size.c: New file.
* gdb.base/max-value-size.exp: New file.
* gdb.base/huge.exp: Disable max-value-size for this test.
If you have "set follow-fork child" set, then if you do "info threads"
right after a fork, and before the child reports any other event to
GDB core, you'll see:
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 31875) "fork-plus-threa" (running)
2.1 process 31879 "fork-plus-threa" Selected thread is running.
(gdb)
The "Selected thread is running." bit is a bogus error. That was GDB
trying to fetch the current frame of thread 2.1, because the external
runnning state is "stopped", and then throwing an error because the
thread is actually running.
This actually affects all-stop + schedule-multiple as well.
The problem here is that on a fork event, GDB doesn't update the
external parent/child running states.
New comprehensive test included. The "kill inferior 1" / "kill
inferior 2" bits also trip on PR gdb/19494 (hang killing unfollowed
fork children), which was fixed by the previous patch.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* infrun.c (handle_inferior_event_1) <fork/vfork>: Update
parent/child running states.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* gdb.base/fork-running-state.c: New file.
* gdb.base/fork-running-state.exp: New file.
linux_nat_kill relies on get_last_target_status to determine whether
the current inferior is stopped at a unfollowed fork/vfork event.
This is bad because many things can happen ever since we caught the
fork/vfork event... This commit rewrites that code to instead walk
the thread list looking for unfollowed fork events, similarly to what
was done for remote.c.
New test included. The main idea of the test is make sure that when
the program stops for a fork catchpoint, and the user kills the
parent, gdb also kills the unfollowed fork child. Since the child
hasn't been added as an inferior at that point, we need some other
portable way to detect that the child is gone. The test uses a pipe
for that. The program forks twice, so you have grandparent, child and
grandchild. The grandchild inherits the write side of the pipe. The
grandparent hangs reading from the pipe, since nothing ever writes to
it. If, when GDB kills the child, it also kills the grandchild, then
the grandparent's pipe read returns 0/EOF and the test passes.
Otherwise, if GDB doesn't kill the grandchild, then the pipe read
never returns and the test times out, like:
FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: kill parent (timeout)
FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: kill parent (timeout)
No regressions on x86_64 Fedora 20. New test passes with gdbserver as
well.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* linux-nat.c (kill_one_lwp): New, factored out from ...
(kill_callback): ... this.
(kill_wait_callback): New, factored out from ...
(kill_wait_one_lwp): ... this.
(kill_unfollowed_fork_children): New function.
(linux_nat_kill): Use it.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* gdb.base/catch-fork-kill.c: New file.
* gdb.base/catch-fork-kill.exp: New file.
This patch unbuffer the output of the program so that the test harness
can count the number of "done" from output correctly.
gdb/testsuite:
2016-01-22 Yao Qi <yao.qi@linaro.org>
PR testsuite/19491
* gdb.base/multi-forks.c: Include
../lib/unbuffer_output.c
(main): Call gdb_unbuffer_output.
A relatively recent patch support for explicit locations, and part
of that patch cleaned up the way we parse breakpoint locations.
Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint
locations. In particular, on PIE programs, one can see the issue by
doing the following, with any program:
(gdb) b *main
Breakpoint 1 at 0x51a: file hello.c, line 3.
(gdb) run
Starting program: /[...]/hello
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Just for the record, this regression was introduced by:
commit a06efdd6ef
Date: Tue Aug 11 17:09:35 2015 -0700
Subject: Explicit locations: introduce address locations
What happens is that the patch makes the implicit assumption that
the address computed the first time is static, as if it was designed
to only support litteral expressions (Eg. "*0x1234"). This allows
the shortcut of not re-computing the breakpoint location's address
when re-setting breakpoints.
However, this does not work in general, as demonstrated in the example
above.
This patch plugs that hole simply by saving the original expression
used to compute the address as part of the address location, so as
to then re-evaluate that expression during breakpoint re-set.
gdb/ChangeLog:
* location.h (new_address_location): Add new parameters
"addr_string" and "addr_string_len".
(get_address_string_location): Add declaration.
* location.c (new_address_location): Add new parameters
"addr_string" and "addr_string_len". If not NULL, store
a copy of the addr_string in the new location as well.
(get_address_string_location): New function.
(string_to_event_location): Update call to new_address_location.
* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
Save the event location in the parser's state before
passing it to convert_address_location_to_sals.
* breakpoint.c (create_thread_event_breakpoint): Update call
to new_address_location.
(init_breakpoint_sal): Get the event location's string, if any,
and use it to update call to new_address_location.
* python/py-finishbreakpoint.c (bpfinishpy_init):
Update call to new_address_location.
* spu-tdep.c (spu_catch_start): Likewise.
* config/djgpp/fnchange.lst: Add entries for
gdb/testsuite/gdb.base/break-fun-addr1.c and
gdb/testsuite/gdb.base/break-fun-addr2.c.
gdb/testsuite/ChangeLog:
* gdb.base/break-fun-addr.exp: New file.
* gdb.base/break-fun-addr1.c: New file.
* gdb.base/break-fun-addr2.c: New file.
The gnu_vector test case yields a new FAIL on s390x:
FAIL: gdb.base/gnu_vector.exp: verify vector return value
It was introduced by commit 77ae9c1933 "gdb.base/gnu_vector.exp:
Don't test output from the inferior". That commit dropped the special
handling for GDB's inability (on some targets) to set the return value.
This change re-establishes the logic from before, converting the above
FAIL to a KFAIL (PRMS gdb/8549).
gdb/testsuite/ChangeLog:
* gdb.base/gnu_vector.exp: Re-establish handling for should_kfail
when GDB can not set the vector return value. Add more comments
for clarification.
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
This commit adds a new $_gthread convenience variable, that is like
$_thread, but holds the current thread's global thread id.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_gthread.
* gdbthread.h (struct thread_info) <global_num>: Mention
$_gthread.
* thread.c (thread_num_make_value_helper): New function.
(thread_id_make_value): Delete.
(thread_id_per_inf_num_make_value, global_thread_id_make_value):
New.
(thread_funcs): Adjust.
(gthread_funcs): New.
(_initialize_thread): Register $_gthread variable.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Expect $_gthread as well.
* gdb.multi/tids.exp: Test $_gthread.
* gdb.threads/thread-specific.exp: Test $_gthread.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document the $_gthread convenience
variable.
(Convenience Vars): Likewise.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
This commit merges both the registers and $_siginfo "thread
running/executing" checks into a single function.
Accessing $_siginfo from a "catch signal" breakpoint condition doesn't
work. The condition always fails with "Selected thread is running":
(gdb) catch signal
Catchpoint 3 (standard signals)
(gdb)
condition $bpnum $_siginfo.si_signo == 5
(gdb) continue
Continuing.
Error in testing breakpoint condition:
Selected thread is running.
Catchpoint 3 (signal SIGUSR1), 0x0000003615e35877 in __GI_raise (sig=10) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(gdb)
When accessing the $_siginfo object, we check whether the thread is
marked running (external/public) state and refuse the access if so.
This is so "print $_siginfo" at the prompt fails nicelly when the
current thread is running. While evaluating breakpoint conditionals,
we haven't decided yet whether the thread is going to stop, so
is_running still returns true, and we thus always error out.
Evaluating an expression that requires registers access is really
conceptually the same -- we could think of $_siginfo as a pseudo
register. However, in that case we check whether the thread is marked
executing (internal/private state), not running (external/public
state). Changing the $_siginfo validation to check is_executing as
well fixes the bug in question.
Note that checking is_executing is not fully correct, not even for
registers. See PR 19389. However, I think this is the lesser of two
evils and ends up as an improvement. We at least now have a single
place to fix.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* frame.c (get_current_frame): Use validate_registers_access.
* gdbthread.h (validate_registers_access): Declare.
* infrun.c (validate_siginfo_access): Delete.
(siginfo_value_read, siginfo_value_write): Use
validate_registers_access.
* thread.c (validate_registers_access): New function.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* gdb.base/catch-signal-siginfo-cond.c: New file.
* gdb.base/catch-signal-siginfo-cond.exp: New file.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
This exposes the issued fixed by 2f99e8fc9cb8:
https://sourceware.org/ml/gdb-patches/2015-12/msg00423.html
to native debugging as well.
gdb/testsuite/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
* gdb.base/random-signal.exp (do_test): New procedure, with body
of testcase moved in.
(top level) Call it twice, once with "run" and once with "attach".
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
3ca22649a6 is the first bad commit
commit 3ca22649a6
Author: Simon Marchi <simon.marchi@polymtl.ca>
Date: Mon Dec 21 12:51:54 2015 -0500
Remove HP-UX references fom testsuite
@@ -1013,13 +1013,6 @@ proc localvars_in_indirect_call { } {
#
gdb_test_multiple "finish" "finish from indirectly called function" {
- -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*First.*$gdb_prompt $" {
- #On hppa2.0w-hp-hpux11.00, gdb finishes at one line earlier than
- #hppa1.1-hp-hpux11.00. Therefore, an extra "step" is necessary
- #to continue the test.
- send_gdb "step\n"
- exp_continue
- }
-re ".*\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*Second.*$gdb_prompt $" {
pass "finish from indirectly called function"
}
->
finish^M
Run till exit from #0 call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
0x0804a189 in main () at ./gdb.base/funcargs.c:583^M
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */^M
-(gdb) step^M
-584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
-(gdb) PASS: gdb.base/funcargs.exp: finish from indirectly called function
+(gdb) FAIL: gdb.base/funcargs.exp: finish from indirectly called function
step^M
-call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
-82 c = 'a';^M
-(gdb) PASS: gdb.base/funcargs.exp: stepping into indirectly called function
+584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
+(gdb) FAIL: gdb.base/funcargs.exp: stepping into indirectly called function
At least on x86_64 with testsuite in -m32 (expecting native i386 would be the
same).
Pedro Alves:
The difference is that with newer GCC there's an extra instruction
after the call which is still assigned to line 583:
$ diff -up /tmp/4.8.3 /tmp/6.0.0 -U 1000
--- /tmp/4.8.3 2016-01-11 12:37:39.611089156 +0000
+++ /tmp/6.0.0 2016-01-11 13:21:00.021127976 +0000
@@ -1,27 +1,30 @@
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
+
I don't know why -m32 changed to push/add instead of mov while 64-bit hasn't.
This is most likely needed on non-x86 ports as well.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/funcargs.exp (finish from indirectly called function):
Reintroduce the case for 'First'.
fe33faff35 is the first bad commit
commit fe33faff35
Author: Simon Marchi <simon.marchi@ericsson.com>
Date: Tue Dec 22 10:52:31 2015 -0500
Remove HP-UX reference in foll-vfork.exp
FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork child follow, finish after tcatch vfork: continue to vfork
It happens for plain gdb.base/foll-vfork.exp runtest on Fedora 23 x86_64.
-Temporary catchpoint 2 (vforked process 24562), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25345), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
-Temporary catchpoint 2 (vforked process 24629), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25411), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
So I have reverted it and just simplified the comment.
The third case is not necessary during testing but I have changed back all the
3 cases.
Pedro Alves:
I know it was that way before, but would you mind moving this to a helper
proc.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
(tcatch_vfork_then_child_follow_exec)
(tcatch_vfork_then_child_follow_exit): Revert back DWARF vfork
identification.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
One more I just found.
Tested with native, native-gdbserver and native-extended-gdbserver on
Linux.
gdb/testsuite/ChangeLog:
* gdb.base/foll-vork.exp: Remove HP-UX special case.
This patch removes cases from the testsuite that are not posssibly used. The
messages "Catch of * not yet implemented" were removed here:
https://www.sourceware.org/ml/gdb-patches/2004-01/msg00679.html
I changed the regexp at the same time to match the string more closely.
gdb/testsuite/ChangeLog:
* gdb.base/break.exp: Remove dead code.
* gdb.base/sepdebug.exp: Likewise.
This patch removes all special cases for HP-UX, for which support has
been removed earlier, that I found in the testsuite. Note that the hppa
architecture != HP-UX, since other OSes can run on hppa, so I tried to
leave everything that is not HP-UX specific.
Two complete tests were completely HP-UX specific, so I removed them.
I ran the testsuite on Linux x86-64, native and native-gdbserver, and
noticed no regressions.
gdb/testsuite/ChangeLog:
* gdb.asm/asm-source.exp: Remove HP-UX references.
* gdb.base/annota1.exp: Likewise.
* gdb.base/annota3.exp: Likewise.
* gdb.base/attach.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/catch-fork-static.exp: Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec-mode.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/inferior-died.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/solib1.c: Likewise.
* gdb.base/step-test.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.multi/bkpt-multi-exec.ex: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* lib/future.exp: Likewise.
* lib/gdb.exp: Likewise.
* gdb.base/so-indr-cl.c: Remove.
* gdb.base/so-indr-cl.exp: Likewise.
* gdb.base/solib.c: Likewise.
* gdb.base/solib.exp: Likewise.
* gdb.base/solib2.c: Likewise.
This patch updates tests for fork and exec events in target remote mode.
In the majority of cases this was a simple matter of removing some code
that disabled the test for target remote. In a few cases the test needed
to be disabled; in those cases the gdb_protocol was checked instead of
using the [is_remote target] etc.
In a couple of cases we needed to use clean_restart, since target remote
doesn't support the run command, and in one case we had to modify an expect
expression to allow for a "multiprocess-style" ptid.
Tested with the patch that implemented target remote mode fork and exec
event support.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp (main): Enable for target
remote.
* gdb.base/foll-exec-mode.exp (main): Disable for target remote.
* gdb.base/foll-exec.exp (main): Enable for target remote.
* gdb.base/foll-fork.exp (main): Likewise.
* gdb.base/foll-vfork.exp (main): Likewise.
* gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
(proc continue_to_exit_bp_loc): Use clean_restart.
* gdb.base/pie-execl.exp (main): Disable for target remote.
* gdb.base/watch-vfork.exp (main): Enable for target remote.
* gdb.mi/mi-nsthrexec.exp (main): Likewise.
* gdb.threads/execl.exp (main): Likewise.
* gdb.threads/fork-child-threads.exp (main): Likewise.
* gdb.threads/fork-plus-threads.exp (main): Disable for target
remote.
* gdb.threads/fork-thread-pending.exp (main): Enable for target
remote.
* gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
pid.tid style ptids, instead of just tid.
* gdb.threads/thread-execl.exp (main): Enable for target remote.
* gdb.threads/watchpoint-fork.exp (main): Likewise.
* gdb.trace/report.exp (use_collected_data): Allow pid.tid style
ptids, instead of just tid.
When a a user uses 'list +' to list forward through a source file they
eventually reach the end of the source file. Subsequent uses of 'list
+' result in an error message like this, that let the user know they are
at the end of the source file:
Line number XXX out of range; FILENAME has YYY lines.
Compare this to the current behaviour of 'list -' which lists backwards
through a source file. When the user reaches the beginning of the
source file, subsequent uses of 'list -' result in the command silently
returning. This can be confusing if the previous uses of 'list -' have
scrolled off the users display, the user receives no reminder that the
have already seen the start of the file.
After this commit a use of 'list -' when the user has already seen the
start of a file will receive the following error:
Already at the start of FILENAME.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Add an error when trying to use
'-' to scan read off the start of the source file.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_forward): Add end of file error
test.
(test_repeat_list_command): Add end of file error test.
(test_list_backwards): Add beginning of file error test.
There is an inconsistency with the handling of the special +/- arguments
to the list command.
For the very first time that list is used (after the inferior has
changed locations) then only the first character of the argument string
is checked, so 'list +BLAH' will operate as 'list +' and 'list -----FOO'
will operate as 'list -'. This compares to each subsequent use of list,
where the whole argument string is checked, so 'list +BLAH' will try to
list lines of code around the function '+BLAH'.
This commit unifies the behaviour so that the whole argument string is
checked, in order to list the next 10, or previous 10 lines from a file
only 'list +' and 'list -' are now valid.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Check that the argument string is
a single character, either '+' or '-'.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_invalid_args): New function,
defined, and called.
I happen to find that coremaker2.c isn't used in the testsuite (if I
don't miss anything). I don't believe it until I see this ChangeLog
entry,
1999-11-18 Fred Fish <fnf@cygnus.com>
* gdb.base/coremaker2.c: Add sample program for generating
cores that is more self contained than coremaker.c. Eventually
I'll add more code to this and tie it into the testsuite.
looks Fred didn't "tie it into testsuite" later.
gdb/testsuite:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* gdb.base/coremaker2.c: Remove.
This change eliminates some failures on simulator targets and makes
the test run a bit quicker too - without this change, we have to wait
for timeouts.
gdb/testsuite/ChangeLog:
* gdb.base/async.exp (proc test_background): Add case
for asynchronous execution not supported.
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
In my remote cross testing (x86_64 host and aarch64 target), the test
gdb.base/sizeof.exp is skipped because gdb,noinferiorio is defined in
my gdbserver board file. Tests are skipped because the test checks
the expected value from the program's output, but I don't see why must
do it this way. With my patch applied, we can save the result in variable
in the program, and check the variable then. Then, the test doesn't rely
on inferiorio.
gdb/testsuite:
2015-12-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/sizeof.c: Don't include stdio.h and
../lib/unbuffer_output.c.
(main): New variable 'size' and 'value'. Remove printf and
gdb_unbuffer_output. Assign return value to size and value.
* gdb.base/sizeof.exp: Remove the checking to gdb,noinferiorio
at the beginning.
(check_sizeof): Check the result by printing variable 'size'.
(check_valueof): Check the result by printing variable 'value'.
Testing with the extended-remote board with "maint set target-non-stop
on" shows a dprintf-non-stop.exp regression. The issue is simply that
the test is expecting output that is only valid for the native target:
native:
[process 8676] #1 stopped.
remote:
[Thread 8900.8900] #1 stopped.
In order to expose this without "maint set target-non-stop on", this
restarts gdb with non-stop mode already enabled.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf-non-stop.exp: Use build_executable instead of
prepare_for_testing. Start gdb with "set non-stop on" appended to
GDBFLAGS. Lax expected stop output.
Before:
(gdb) info display
Auto-display expressions now in effect:
Num Enb Expression
3: y 1
2: y 1
1: y 1
After:
(gdb) info display
Auto-display expressions now in effect:
Num Enb Expression
1: y 1
2: y 1
3: y 1
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* printcmd.c (display_command): Append new display at the end of
the list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/display.exp: Expect displays to be sorted in ascending
order. Use multi_line.
* gdb.base/solib-display.exp: Likewise.
Before:
(gdb) info checkpoints
3 process 29132 at 0x4008ad, file foo.c, line 81
2 process 29131 at 0x4008ad, file foo.c, line 81
1 process 29130 at 0x4008ad, file foo.c, line 81
* 0 Thread 0x7ffff7fc5740 (LWP 29128) (main process) at 0x4008ad, file foo.c, line 81
After:
(gdb) info checkpoints
* 0 Thread 0x7ffff7fc5740 (LWP 29128) (main process) at 0x4008ad, file foo.c, line 81
1 process 29130 at 0x4008ad, file foo.c, line 81
2 process 29131 at 0x4008ad, file foo.c, line 81
3 process 29132 at 0x4008ad, file foo.c, line 81
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* printcmd.c (display_command): Append new display at the end of
the list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/display.exp: Expect displays to be sorted in ascending
order. Use multi_line.
* gdb.base/solib-display.exp: Likewise.
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
The comment for the code in question says:
/* If the minimal symbol has a zero size, save it
but keep scanning backwards looking for one with
a non-zero size. A zero size may mean that the
symbol isn't an object or function (e.g. a
label), or it may just mean that the size was not
specified. */
As written, the code in question will only scan past the first symbol
of zero size. My change fixes the implementation to match the
comment.
Having this correct is important when the compiler generates several
local labels that are left in place by the linker. (I've been told
that the linker should eliminate these symbols, but I know of one
architecture for which this is not happening.)
I've created a test case called asmlabel.c. It's pretty simple:
main (int argc, char **argv)
{
asm ("L0:");
v = 0;
asm ("L1:");
v = 1; /* set L1 breakpoint here */
asm ("L2:");
v = 2; /* set L2 breakpoint here */
return 0;
}
If breakpoints are placed on the lines indicated by the comments,
this is the behavior of GDB built without my patch:
(gdb) continue
Continuing.
Breakpoint 2, L1 () at asmlabel.c:26
26 v = 1; /* set L1 breakpoint here */
Note that L1 appears as the function instead of main. This is not
what we want to happen. With my patch in place, we see the desired
behavior instead:
(gdb) continue
Continuing.
Breakpoint 2, main (argc=1, argv=0x7fffffffdb88) at asmlabel.c:26
26 v = 1; /* set L1 breakpoint here */
gdb/ChangeLog:
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Scan backwards
over all zero-sized symbols.
gdb/testsuite/ChangeLog:
* gdb.base/asmlabel.exp: New test.
* gdb.base/asmlabel.c: New test case.
One of our users reported an internal error using the "bt full"
command. In their situation, reproducing involved the following
scenario:
(gdb) frame 1
(gdb) bt full
#0 0xf7783430 in __kernel_vsyscall ()
No symbol table info available.
#1 0xf5550aeb in waitpid () at ../sysdeps/unix/syscall-template.S:81
No locals.
[...]
#6 0x0fe83139 in xxxx (arg=...)
[...some locals printed, and then...]
<S17b> =
[...]/dwarf2loc.c:364: internal-error: dwarf_expr_frame_base: Assertion
`framefunc != NULL' failed.
As shown above, the error happens while GDB is trying to print the value
of <S17b>, which is a local string internally generated by the compiler.
For that, it finds that the array lives in memory, and therefore tries
to create a struct value for it via:
case DWARF_VALUE_MEMORY:
{
CORE_ADDR address = dwarf_expr_fetch_address (ctx, 0);
[...]
retval = value_at_lazy (type, address + byte_offset);
Unfortunately for us, TYPE happens to be an array whose bounds
are dynamic. More precisely, the bounds of our arrays are described
in the debugging info as being...
<4><2c1985e>: Abbrev Number: 33 (DW_TAG_subrange_type)
<2c1985f> DW_AT_type : <0x2c1989c>
<2c19863> DW_AT_lower_bound : <0x2c19835>
<2c19867> DW_AT_upper_bound : <0x2c19841>
... which are references to a pair of local variables. For instance,
the lower bound is a reference to the following DIE
<3><2c19835>: Abbrev Number: 32 (DW_TAG_variable)
<2c19836> DW_AT_name : [...]
<2c1983a> DW_AT_type : <0x2c198b4>
<2c1983e> DW_AT_artificial : 1
<2c1983e> DW_AT_location : 2 byte block: 91 58 (DW_OP_fbreg: -40)
As a result of the above, value_at_lazy indirectly triggers
a resolution of TYPE (via value_from_contents_and_address),
which means a resolution of TYPE's bounds, and as seen in
the DW_AT_location attribute above for our bounds, computing
the bound's location requires the frame (its location expression
uses DW_OP_fbreg).
Unfortunately for us, value_at_lazy does not get passed a frame,
we've lost the relevant frame when we try to resolve the array's
bounds. Instead, resolve_dynamic_range gets calls dwarf2_evaluate_property
with NULL as the frame:
static struct type *
resolve_dynamic_range (struct type *dyn_range_type,
struct property_addr_info *addr_stack)
{
[...]
if (dwarf2_evaluate_property (prop, NULL, addr_stack, &value))
^^^^
... which then handles this by using the selected frame instead:
if (frame == NULL && has_stack_frames ())
frame = get_selected_frame (NULL);
In our case, the selected frame happens to be frame #1, which is
a frame where we have a minimal amount of debugging info, and in
particular, no debug info for the function itself. And because of that,
when we try to determine the frame's base...
static void
dwarf_expr_frame_base (void *baton, const gdb_byte **start,
size_t * length)
{
struct dwarf_expr_baton *debaton = (struct dwarf_expr_baton *) baton;
const struct block *bl = get_frame_block (debaton->frame, NULL);
[...]
framefunc = block_linkage_function (bl);
... framefunc ends up being NULL, which triggers the assert
in that same function:
gdb_assert (framefunc != NULL);
This patches avoids the issue by temporarily setting the selected_frame
before printing the locals of each frames.
This patch also adds a small testcase, which reproduces the same
issue, but with a slightly different outcome:
(gdb) bt full
#0 0x000000000040049a in opaque_routine ()
No symbol table info available.
#1 0x0000000000400532 in main () at wrong_frame_bt_full-main.c:20
my_table_size = 3
my_table = <error reading variable my_table (frame address is not available.)>
With this patch, the output becomes:
(gdb) bt full
[...]
my_table = {0, 1, 2}
gdb/ChangeLog:
* stack.c (print_frame_local_vars): Temporarily set the selected
frame to FRAME while printing the frame's local variables.
gdb/testsuite/ChangeLog:
* gdb.base/wrong_frame_bt_full-main.c: New file.
* gdb.base/wrong_frame_bt_full-opaque.c: New file.
* gdb.base/wrong_frame_bt_full.exp: New file.
The Linux kernel disables the FPU upon returning to userland. This
introduces spurious failures in the register preservation tests in
callfuncs.exp, since the pstate.PEF bit gets cleared after system
calls.
This patch filters out the pstate register in sparc64-*-linux-gnu
targets, so the relevant tests are no longer fooled and pass.
gdb/testsuite/ChangeLog:
2015-11-20 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out the
pstate register when comparing registers values in
sparc64-*-linux-gnu targets to avoid spurious differences.
This patch removes the leftover of the d10v stuff in the testsuite
directory. The d10v port was removed in GDB 6.7, but I happen to see
that there are still some leftovers about d10v in testsuite.
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/call-sc.exp (test_scalar_returns): Remove the
comments about d10v.
(test_scalar_returns): Likewise.
* gdb.base/d10v.ld: Remove.
* gdb.base/overlays.exp: Remove the target triplet checking for
d10v-*-*.
* gdb.base/structs.exp (test_struct_returns): Remove the
comments about d10v.
(test_struct_calls): Likewise.
Keith Seitz
Pedro Alves
Simon Marchi
Yao Qi
Doug Evans
Andrew Burgess
Joel Brobecker
Andreas Arnez
Josh Stone
Jan Kratochvil
Simon Marchi
Sandra Loosemore
Don Breazeal
Kevin Buettner
Jose E. Marchesi